Search Results

Search found 10961 results on 439 pages for 'internal dns'.

Page 267/439 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

• ReadyNAS Duo - FTP home network connectivity issue

  - by dwabyick

  I have a ReadyNas Duo that I recently purchased and configured on my local home network. I'm an AT&T DSL subscriber using their default 2701HG-B Gateway (2Wire) wireless router. Basically, I have managed to configure my ReadyNAS, and can access HTTP shares and WINS shares just fine, but cannot get access to it via FTP. I've enabled it in the 'Standard File Protocols' section in the UI, and made a share have read/write default access via FTP. My settings: Port: 21 Authentication mode: User Allow upload resumes: Yes Passive ports: 1024-65535 Masquerade as: (empty, but I've tried the internal IP address). I've even poked around at my router, which has a firewall, and even tried to poke a hole for the 'FTP Server'app for the ReadyNAS. Doesn't seem like I should need to do this, or should. Any ideas what else to check? Thanks! -Daniel

  Read the article

• Xerox phaser 7760 prints gray as pink.

  - by Leif

  I have a Xerox phaser 7760 and 60 iMacs that dual boot xp and osx 10.5. They print without problem to other printers, but if you print to the 7760 anything gray scale comes out with a pink tint. This happens from all 60 computers windows or mac boot from any application. I have reinstalled the driver and run the color balance on the printer. The printer does fine on internal prints of gray for diagnostic pages. Any ideas on how to solve this?

  Read the article

• Error when Sending Emails

  - by dallasclark

  A client of mine keeps receiving the following email when sending mail but their emails are sent successfully. Your outgoing (SMTP) e-mail server has reported an internal error... The server responded: 451 qq read error (#4.3.0) In the mail log (/usr/local/psa/var/log/maillog) I receive the following error: /var/qmail/bin/relaylock[3152]: /var/qmail/bin/relaylock My SMTP Service is setup as followed, if this helps service smtp { socket_type = stream protocol = tcp wait = no disable = no user = root instances = UNLIMITED env = SMTPAUTH=1 server = /var/qmail/bin/tcp-env server_args = -Rt0 /var/qmail/bin/relaylock /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true /var/qmail/bin/cmd5checkpw /var/qmail/bin/true }

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• Windows SBS 2008 - how to diagnose port forwarding problems?

  - by Alt_Doru

  We have a Windows SBS 2008 machine. Several ports need to be forwarded from the router to the server (the machine hosts a FTP server, a Web server, and we need to be access it through Remote Desktop). We recently changed routers (from SpeedTouch to Huawei EchoLife HG520s). With the previous router, port forwarding worked fine. Now, after setting up port forwarding on the new router, nothing works anymore. Can anybody help me with directions on how to diagnose/troubleshoot port forwarding problems on the router and in Windows SBS 2008? E.G.: after forwarding a port in the router interface to the internal IP of the server, how can I see in the SBS 2008 logs if the request is properly forwarded to it?

  Read the article

• Pidgin getting "Connection Refused" whenever I connect to IRC server

  - by tvanover

  On my win 7 x64 machine using pidgin 2.6.3 I cannot connect to any IRC server. I have tried most of the North American servers, as well as my workplace's internal server with no luck. I have tried from work as well as from home but different networks have no effect. I keep getting Unable to Connect: Connection refused. It work fine 3 weeks ago on this very machine running Win 7 x64. But then I re-imaged, and did not backup my .purple folder. Which I had used for the past 2 years and originally created on a vista install. I can connect using this install of Pigin to yahoo and msn with no problems. Just not to irc. Any thoughts?

  Read the article

• Can I have different ESX hosts accessing the same LUN over different protocols?

  - by Kevin Kuphal

  I currently have a cluster of two ESX 3.5U2 servers connected directly via FiberChannel to a NetApp 3020 cluster. These hosts mount four VMFS LUNs for virtual machine storage. Currently these LUNs are only made available via our FiberChannel initator in the Netapp configuration If I were to add an ESXi host to the cluster for internal IT use can I: Make the same VMFS LUNs available via the iSCSI initiator on the Netapp Connect this ESXi host to those LUNs via iSCSI Do all of this while the existing two ESX hosts are connected to those LUNs via FiberChannel Does anyone have experience with this type of mixed protocol environment, specifically with Netapp?

  Read the article

• (Tough) Security Queston about ISP companies

  - by buyrum

  I want to ask a question. One ISP was criticized for it's low security conditions, and when i heard this i started to think: If one gets an unauthorized access to the mainframe computer / internal network of the ISP, then wouldn't he be able to sniff all the traffic ? Because the ISP is providing the internet connection for the user so all traffic that sends and transmits a user travels via the ISP, right ? What security solutions (talking about computer security) are being implemented by other ISP in order to protect themselves and their users ? If all the connections are being sent via a special computer, how secure it is and how can be we sure that it's really safe ? And what kind of computers are those who serve as backbones for the ISP ? Thank you in advance for your help.

  Read the article

• Solarwinds SDK/customisation

  - by Shane

  Hi, Sorry if this is the wrong place to post, but it is a hybrid serverfault/stackoverflow question. I've been directed to take a look at Solarwinds, which is an excellent network monitoring solution, for an internal project. Basically we want to write our own panel to display information custom to our network infrastructure. Has anyone done anything like this, or know if there is a plugin SDK giving developer access? [edit:] Also, if anyone knows of any other Solarwinds-type open source network solutions, please let me know. Cheers, Shane

  Read the article

• XenServer 5.5 Error adding additional Server to Ressource Pool

  - by SideShowCoder

  I'm running Citrix XenServer 5.5 as a testsetup, with Openfiler providing Storage via NFS. I tried to setup a Ressource Pool to test Live migration but I'm unable to a my 2. Server to the Pool. It fails after about 10sec with the Error: 4/26/2010 2:54:52 PM Error: Adding server 'u-173-c047.XXX.XXX' to pool 'Portland' - Internal error: Stunnel.Stunnel_error("") I'm kind of lost right now where to look whats causing this, and the Error is not really of any help. Are there logs availible somewhere besides in XenCenter, which might be helpful? Any Ideas what is causing this? Thanks

  Read the article

• Recover lost NTFS partition on SSD

  - by Emil

  Hello, About 2 month ago I upgraded my Dell Latitude E6500 laptop with a Corsair Force F120 SSD drive. Everything worked well until about a week or so back. I started the computer and was faced with a beep and a message saying "No boot sector on Internal HDD (IRRT). No bootable devices". Since I figured that the boot sector had somehow got corrupt I tried booting from the Windows 7 dvd in order to repair the boot sector. But the Windows 7 installation program only found a blank drive with 111GB of unallocated space. I panicked and brought the drive with me to work to let a colleague have a look at it. We made a disk image of the entire drive and ran the drive through Testdisk in Linux. Testdisk did not find any partitions. It appears that the drive has been completely erased... What has happened? What is causing this behavior on an SSD?

  Read the article

• Windows 7 Reading Proper Disk Usage Statistics on Mounted Volumes

  - by Troy Perkins

  I'm running windows 7 with 2 x 1.5 TBYTE Drives. The second internal drive is setup as a mounted volume as C:\Archives Clicking computer icon in windows explorer, it only shows capacity stats for C: and Not C:\Archives Also, the usage stats that do show for C: show to be 100% capacity red - yet the system runs fine. No warnings. Can someone explain this? I do have a lot of stuff on the c: drive, but I'm sure its not 1.5 TB worth and C:\Archives hardly has anything it. Thanks! Troy

  Read the article

• Wordpress: Problem installing on dedicated windows server 2008/IIS7

  - by Niels Bosma

  I'm having trouble with installing Wordpress on a dedicated Microsoft Windows Web Server 2008 R2. I've installed Wordpress Version 2.9.2 from Web platform installer 3.0. After installation when I try to access wordpress, either from ~/index.php or ~/wp-admin/install.php I get the error: HTTP Error 500.0 - Internal Server Error File monitoring is enabled for a file which could not be found Modul: FastCgiModule Notification: ExecuteRequestHandler Handler: PHP52_via_FastCGI Error Code: 0x80070003 I have both .Net 2.0 and .Net 4.0 installed. Adding a "phpinfo.php" gives me the same error. The application pool in IIS7 that's used for the website is: "No Managed Code" and set to "Integrated" in "Managed Pipeline Mode". I've tried to reboot the machine. What's more can I try?

  Read the article

• Hyper-V VMs hanging 10 minutes after startup

  - by Ken George

  Hyper-V running under a fresh install of 2008 R2 DC 2 VMs both running 2008 R2 STD One VM has SQL 2008 Server w/ SP2 and Office 2007 Enterprise w/ SP2 Othe VMS only Office 2007 w/ SP2. Approximately 10 minutes after reboot the Hyuper-V host the VMs will hang Hang = answers pings, but no RDP connections and Hyper-V console session is non responsive Disabled Hyper-V and had no proble with 2008 R2 DC host. Started the three Hyper-V services and 10 minutes later was hung again. Hardware is HP DL380 G4 2 socket, 48 GB, Internal SAS controller 1.5TB C drive VMs .VHDs are on external SAS controller on a 1.5 TB RAID5 volume. Nothing in event log on either VMs or Hyper-V host. Ken

  Read the article

• IE11 throws error in IEFRAME

  - by c69

  When I try to see "properties" of JSFiddle's logo, IE11 shows script error in file res://ieframe.dll/anchbrws.js Looking at the file, I see function BodyLoad() { var arrAll = document.all; for (i=0; i < arrAll.length; i++) { var elm = arrAll[i]; if (elm.id.substring(0,1) == "_") { if (elm.innerText== "undefined" || elm.innerText == "") { elm.innerText = L_NotAvailable_Text; } } } } from what I see, trying to read document.all is a stupid idea to do in IE11, which puts me to concern - is this a bug in IE's internal script or I have old version of some file(s) or my PC was compromised ? p.s: this error does not happen on other pages, nor on other elements of JSFiddle site.

  Read the article

• Cisco 877 as a VPN server?

  - by Massimo

  I have a Cisco 877 router which connects my network to the Internet using an ADSL line, a single public IP address and NAT; the IOS version is 15. Everything is working ok, but I'd like to configure this router to be a VPN server, to be able to connect to the network from the outside. I've tried looking for documentation, but everything I can find is related to having the 877 act as a VPN client, or to site-to-site VPNs; I can't find anything about letting single remote computers access the internal network, which is something I can do quite easily using Windows' RRAS or ISA Server. Can the Cisco 877 act as a VPN server for remote client computers? (Looks like it should, but just to be sure...) Which type of VPNs does it support? Do they require some special software on the client machines, or can they be used by standard out-of-the-box Windows computers? And, finally: how to set up this?

  Read the article

• Useful scripts for Sikuli

  - by Ivo Flipse

  Thanks to Lifehacker I came across Sikuli which is described as: Sikuli is a visual technology to search and automate graphical user interfaces (GUI) using images (screenshots). The first release of Sikuli contains Sikuli Script, a visual scripting API for Jython, and Sikuli IDE, an integrated development environment for writing visual scripts with screenshots easily. Sikuli Script automates anything you see on the screen without internal API's support. You can programmatically control a web page, a desktop application running on Windows/Linux/Mac OS X, or even an iphone application running in an emulator. As this looks very promising, perhaps complementary to AutoHotKey I'm curious what scripts you guys will come up with. Especially since this program is portable and could solve "simple" Super User problems. Example script from their documentation: setThrowException(True) setAutoWaitTimeout(10000) switchApp("System Preferences.app") click() click() click() click() wait() type("192.168.0.1\t") type("255.255.255.0\t") type("192.168.0.254\t") click()

  Read the article

• Ubuntu mount hard drive confusing

  - by Fresheyeball

  I'm new to linux and have a home server set up running ubuntu. In the ui its very easy to mount my additional internal harddrives. I just double click on them. Since I have made this server headless, I now need to mount via the command line. How can I replicate the very simple double click gui behavior? So far all the information I've found is very complex. Ubuntu auto generated folders for each hd in under /media and I can see the harddrives under /dev but have no idea which is which as the hardware is identical between them. I also don't know how they are formated. Thanks in advance for any advice you have.

  Read the article

• Getting USB boot to work in SmartOS on HP ProLiant N40L

  - by user126579

  I recently downloaded SmartOS and tried running it on my HP ProLiant N40L, but it always fails on boot. After dd'ing the image to the USB stick, I plug it into the internal USB header and turn the machine on. After selecting from GRUB, it displays the following: , bss=0x0 It sits there for 2-4 minutes, then finally boots the OS and displays the following: WARNING: Couldn't read ACPI SRAT table from BIOS. lgrp support will be limited to one group. SunOS Release 5.11 Version joyent_20120614T184600Z 64-bit Copyright (c) 2010-2012, Joyent Inc. All rights reserved. WARNING: kvm: no hardware support After that, it hangs. I've tried this with two different USB sticks. I've seen some mentions on the SmartOS website about people running it on an N40L, booting from USB, so maybe it's just broken hardware? Has anyone gotten this working?

  Read the article

• WSUS data store error

  - by Kalenus

  I have one upstream server and 17 downstream (configured as replicas). I'm getting this error in one of them and I'm stuck: "An error occurred with the server's data store". Details: SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. at Microsoft.UpdateServices.DatabaseAccess.DBConnection.DrainObsoleteConnections(SqlException e) at Microsoft.UpdateServices.DatabaseAccess.DBConnection.ExecuteReader() at Microsoft.UpdateServices.Internal.DataAccess.HideUpdatesForReplicaSync(String xmlUpdateIds) at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ProcessHiddenUpdates(Guid[] hiddenUpdates) at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ReplicaSync() at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect) I already tried using the cleanup wizard to no avail.

  Read the article

• IPcop Multiple WAN Subnets

  - by obsidian

  We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

  Read the article

• DRBD Not syncing between my nodes

  - by Mike Curry

  Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• Differences between FCKeditor and CKeditor?

  - by matt74tm

  Sorry, but I've not been able to locate anything (even on the official pages) informing me of the differences between the two versions. Even a query on their official forum has been unanswered for many months - http://cksource.com/forums/viewtopic.php?f=11&t=17986&start=0 The license page talks a bit about the "internal" differences http://ckeditor.com/license CKEditor Commercial License - CKSource Closed Distribution License - CDL ... This license offers a very flexible way to integrate CKEditor in your commercial application. These are the main advantages it offers over an Open Source license: * Modifications and enhancements doesn't need to be released under an Open Source license; * There is no need to distribute any Open Source license terms alongside with your product and no reference to it have to be done; * No references to CKEditor have to be done in any file distributed with your product; * The source code of CKEditor doesn’t have to be distributed alongside with your product; * You can remove any file from CKEditor when integrating it with your product.

  Read the article

• Network Logon Issues with Group Policy and Network

  - by bobloki

  I am gravely in need of your help and assistance. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers. Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup. So I started looking at our group policy and located some very interesting event ID’s. Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a domain controller. Group Policy 1055: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller). NETLOGON 5719 : This computer was not able to set up a secure session with a domain controller in domain OURDOMAIN due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. E1kexpress 27: Intel®82567LM-3 Gigabit Network Connection – Network link is disconnected. NetBT 4300 – The driver could not be created. WMI 10 - Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. More or less with timestamps it becomes apparent that the network maybe the issue. 1:25:57 - Group Policy is trying to discover the domain controller information 1:25:57 - The network link has been disconnected 1:25:58 - The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator. 1:25:58 - Making LDAP calls to connect and bind to active directory. DC1.ourdomain.edu 1:25:58 - Call failed after 0 milliseconds. 1:25:58 - Forcing rediscovery of domain controller details. 1:25:58 - Group policy failed to discover the domain controller in 1030 milliseconds 1:25:58 - Periodic policy processing failed for computer OURDOMAIN\%name%$ in 1 seconds. 1:25:59 - A network link has been established at 1Gbps at full duplex 1:26:00 - The network link has been disconnected 1:26:02 - NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and DOUBLE THE REATTEMPT INTERVAL thereafter. 1:26:05 - A network link has been established at 1Gbps at full duplex 1:26:08 - Name resolution for the name %Name% timed out after none of the configured DNS servers responded. 1:26:10 – The TCP/IP NetBIOS Helper service entered the running state. 1:26:11 - The time provider NtpClient is currently receiving valid time data at dc4.ourdomain.edu 1:26:14 – User Logon Notification for Customer Experience Improvement Program 1:26:15 - Group Policy received the notification Logon from Winlogon for session 1. 1:26:15 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4. ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:18 - Computer details: Computer role : 2 Network name : (Blank) 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:19 - The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. 1:26:46 - The Network Connections service entered the running state. 1:27:10 – Retrieved account information 1:27:10 – The system call to get account information completed. 1:27:10 - Starting policy processing due to network state change for computer OURDOMAIN\%name%$ 1:27:10 – Network state change detected 1:27:10 - Making system call to get account information. 1:27:11 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:27:13 - Computer details: Computer role : 2 Network name : ourdomain.edu (Now not blank) 1:27:13 - Group Policy successfully discovered the Domain Controller in 2886 milliseconds. 1:27:13 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu The call completed in 2371 milliseconds. 1:27:15 - Estimated network bandwidth on one of the connections: 0 kbps. 1:27:15 - Estimated network bandwidth on one of the connections: 8545 kbps. 1:27:15 - A fast link was detected. The Estimated bandwidth is 8545 kbps. The slow link threshold is 500 kbps. 1:27:17 – Powershell - Engine state is changed from Available to Stopped. 1:27:20 - Completed Group Policy Local Users and Groups Extension Processing in 4539 milliseconds. 1:27:25 - Completed Group Policy Scheduled Tasks Extension Processing in 5210 milliseconds. 1:27:27 - Completed Group Policy Registry Extension Processing in 1529 milliseconds. 1:27:27 - Completed policy processing due to network state change for computer OURDOMAIN\%name%$ in 16 seconds. 1:27:27 – The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. Any help would be appreciated. Please ask for any relevant information and it will be provided as soon as possible.

  Read the article

• Add a custom certificate authority to Ubuntu

  - by rmrobins

  Hello; I have created a custom root certificate authority for an internal network, example.com. Ideally, I would like to be able to deploy the CA certificate associated with this certificate authority to my Linux clients (running Ubuntu 9.04 and CentOS 5.3), such that all of the applications automatically recognize the certificate authority (i.e. I do not want to have to configure Firefox, Thunderbird, etc manually to trust this certificate authority). I have attempted this on Ubuntu by copying the PEM-encoded CA certificate to /etc/ssl/certs/ and /usr/share/ca-certificates/, as well as by modifying /etc/ca-certificates.conf and rerunning update-ca-certificates, however applications do not seem to recognize that I have added another trusted CA to the system. Therefore, is it possible to add a CA certificate once to a system, or is it necessary to manually add the CA to all of the possible applications that will attempt to make SSL connections to hosts signed by this CA in my network? If it is possible to add a CA certificate once to the system, where does it need to go? Thanks.

  Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >