Search Results

Search found 13104 results on 525 pages for 'malcolm box'.

Page 267/525 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

• MS Server 2003 Activiation Loop

  - by RPGonzo

  Recently we had a motherboard failure on a terminal server so we replaced the faulty motherboard, re-setup the RAID arrays (same motherboard but still wouldn't recognize old RAID setup) and continued to recover the system from a previous backup. No problem up to here, after restoring the system you are prompted to reboot and than login. On login we get a message box stating that Windows needs to be activated do you want to activate now, press yes but than the OS proceeds to log you off and do nothing at all. You can try over and over but to no avail. Found a few articles about a glitch in the activation script and how to reset it, tried that with the same results. Hoping someone can share some knowledge if you have seen this before? Thanks!

  Read the article

• Windows 8 Task Manager without elevating?

  - by Ben Voigt

  In Windows Vista and Windows 7, the task manager ran non-elevated, and you didn't face a UAC prompt unless you chose "View Processes of All Users". In Windows 8 Preview, out of the box the Task Manager starts elevated every time. How can I configure it to start non-elevated so I don't get hit with a UAC prompt every time I check CPU usage or view the list of running processes to see if an application closed completely? (I am not looking for answers which involve weakening UAC, and I ask the community's help in downvoting any such suggestions.)

  Read the article

• EBS full device confusion

  - by Mike

  I have a 500GB EBS device (/dev/xvdf) mounted to /vol and all data on the box seems to be writing to /vol correctly (see du output below). For some reason /dev/xvda1 is totally full. Any idea what's going on here? $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 32G 30G 8.0K 100% / udev 34G 8.0K 34G 1% /dev tmpfs 14G 176K 14G 1% /run none 5.0M 0 5.0M 0% /run/lock none 34G 0 34G 0% /run/shm /dev/xvdb 827G 201M 785G 1% /mnt /dev/xvdf 500G 145G 356G 29% /vol $ du -sh * 8.7M bin 18M boot 8.0K dev 5.1M etc 48K home 0 initrd.img 80M lib 4.0K lib64 16K lost+found 4.0K media 20K mnt 4.0K opt 0 proc 40K root 176K run 7.1M sbin 4.0K selinux 4.0K srv 0 sys 4.0K tmp 414M usr 356M var 0 vmlinuz 145G vol

  Read the article

• Sync files between Mac, PC and Linux automatically

  - by Siriss

  Hello everyone- I have a MacBook Pro, a Windows 7 desktop, and a Fedora 13 netbook. I have been searching far and wide for an automatic solution to sync files (pictures, music, docs, etc...) between the three when they are all on the same LAN. To better explain, when I get home and turn my MacBook on, I want it to sync automatically any file changes to Windows 7 and the netbook. Likewise if I make changes on my Windows 7 box, I want them to be reflected on my Mac. I can use rsync, but it is not automatic as far as I can tell, and I would use Dropbox but I have a lot more that 2 gigs and do not want to pay. I also do not need internet syncing. I just want local LAN. Does anyone have any ideas? Thank you very much in advance.

  Read the article

• IE8 Crash On Startup

  - by Wonko the Sane

  Hello All, I have a problem - IE8 has suddenly stopped working. I was doing some development work, and suddenly IE8 crashed every time I tried to use it. I've rebooted, but still crash every time I try to open it. There is no real indication as to what has gone wrong. It just says "Internet Explorer has stopped working". I've tried almost everything that I've seen when I've Googled it: I disabled all Add-Ins via Manage Add-Ins, but it still crashes on startup* I re-registered IEPROXY.DLL * The thing I don't understand is that if I start from the Run box with the -extoff option, IE starts up. Isn't that the same as disabling all Add-Ins? Any ideas? Thanks, wTs

  Read the article

• Pidgin not working with Gtalk

  - by Selvakumar Ponnusamy

  I have downloaded latest Pidgin(version 2.10.6) for Windows and tried to gtalk account to it. It shows "not authorized" error. I have tried many options given in the net and its not working for me, Below are the values I have given, Basic Tab: Protocal: XMPP Username: <my username> Domain: gmail.com Password: <My Password> and enabled Remember password check box Advanced Tab: Connection security: Require Encryption (Default) Unhecked "Allow plaintext auth over unencrypted streams" (Default) Connection Port: 5222 (Default) Connect server: talk.google.com File Transfer proxies: proxy.eu.jabber.org (default) BOSH URL: <Empty> (default) I enabled two step verification process for my gmail account, So I created application specific password and given here. But Its not working. Please help me what could be the problem and how to resolve it?

  Read the article

• Can't Shut Down computer with windows 8 Release Preview

  - by Bram Winda

  I downloaded Release Preview and installed it. I have a problem when I shut down the computer. After I press windows key + I Power Shut Down, a box pops up titled "Winlogon.exe - No Disk. Then under that is the message "There is no disk in the drive. Please insert a disk into Drive G". After hitting the retry button a couple of different times the screen finally goes dark. When I was going to turn it back on, I noticed the Power Button was still list. The only way to do a complete Shutdown is to hold in the power button directly. How do I fix this problem?

  Read the article

• Running CGI With Perl under Apache Permission Problem

  - by neversaint

  I have the following entry under apache2.conf in my Debian box. AddHandler cgi-script .cgi .pl Options +ExecCGI ScriptAlias /cgi-bin/ /var/www/mychosendir/cgi-bin/ Then I have a perl cgi script stored under these directories and permissions: nvs@somename:/var/www/mychosendir$ ls -lhR .: total 12K drwxr-xr-x 2 nvs nvs 4.0K 2010-04-21 13:42 cgi-bin ./cgi-bin: total 4.0K -rwxr-xr-x 1 nvs nvs 90 2010-04-21 13:40 test.cgi However when I tried to access it in the web browser: http://myhost.com/mychosendir/cgi-bin/test.cgi They gave me this error: Forbidden You don't have permission to access /mychosendir/cgi-bin/test.cgi on this server. What's wrong with it? Update: I also have the following entry in my apache2.conf: <Files ~ "^\.ht"> Order allow,deny Deny from all </Files>

  Read the article

• Changing location of ClamAV logging files

  - by GrumpyCanuck

  I've run into a weird problem with ClamAV that I have been unable to resolve, due to a incredibly non-informative error message. I've installed ClamAV via aptitude on an Ubuntu box (ClamAV 0.96.5/13202 according to the system) up on EC2 and it is 100% stock. We have an additional drive mounted under /mnt where we put all our log files. When I start it up with the log files in the default location, it runs just fine. However, if I change the configuration file from /var/log/clamav/clamav.log to /mnt/clamav/clamav.log I get the error ERROR: Can't open /mnt/clamav/clamav.log in append mode (check permissions!). ERROR: Can't initialize the internal logger It's the same file with the same permissions on it, just in a different location. Any thoughts or tips on how to resolve this problem would be greatly appreciated.

  Read the article

• Linux halts every few seconds

  - by Zeppomedio

  We're having an issue where one our Linux boxes (Ubuntu 10.04 LTS, running on EC2 with a quadruple-large size, 68GB of RAM and 8 virtual cores with 3.25GHz each) freezes up every few seconds. Typing in an ssh session will freeze, and running strace on one of the Postgresql processes that's running usually shows: 02:37:41.567990 semop(7831581, {{3, -1, 0}}, 1 for a few seconds before it proceeds (it always gets stuck at that semop). OProfile shows that most of the time is spent in the kernel (60%) versus 37% in Postgresql. The result of these halts (which began suddenly a day ago) is that load on the box has gone from 0.7 to 10+, and causes our entire stack to slow done. Any ideas on how to track down what's going on? iostat doesn't show the disks being particularly slow or overloaded, and top shows user cpu % spike from 8% to about 40% whenever these back-ups happen.

  Read the article

• Connecting together DIR-615 and DIR-655

  - by ra170

  On my DIR-655 my internal network is: 192.168.0.x On my DIR-615 my internal network is: 192.168.1.x They are both connected to my firewall PIX 501 box The PIX itself is connected to the comcast modem. I briefly looked at the menu options on those router and they look similar, however I'm not sure what's the best way to connect those two together so that I can go between those networks. (printing, file browsing, etc.) I'm not sure if I have to do this somehow on those two router or on the PIX itself, or probably on all of them. If anyone has experience with something like that please let me know..

  Read the article

• Is it possible to disable ARP in Windows 7

  - by DriverGuy

  I have a unique requirement where I need to disable ARP on a Windows 7 box. In previous Windows versions you could modify the ArpRetryCount in the registry (and set it to 0), but this does not work in 7 (nor does it exist). Does anybody know how, or if this is possible? I've been asked to elaborate this more and I'm not quite sure how. I want to switch off ARP (including gratuitous arp) on Windows 7 for a project I'm working on. You can do this in Linux by simply adding '-arp' when you bring up an interface, but you cannot do this in Windows 7. You could in previous versions by modifying the registry, but this does not work any more. If the fine folk here aren't sure then I don't like my chances...

  Read the article

• Wireless networking on Gnome on Ubuntu 9 / 10

  - by WaveyDavey

  So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

  Read the article

• Why no "da-doomp" (disconnect notification sound) sometimes when unplugging wireless mouse receiver?

  - by DanH

  Sometimes (maybe one case in 3), when I unplug the wireless mouse receiver on my Sony VGN-CS215J laptop, there is no "da-doomp" sound, even after a minute or two. And if I plug the receiver back in there is no corresponding "du-dump" sound and the mouse is still (immediately) "live". This can happen when the activity light is out and there's nothing obviously going on -- it's not simply that the box is too busy. Other times one gets the expected behavior (and usually I get the correct behavior if I plug the receiver back in a few seconds and then unplug it after a "failure"). The reason this is significant is that if I get no "da-doomp" then the laptop will not sleep properly -- it will go to sleep initially, but then reawaken a few minutes later inside my laptop case and proceed to run the battery down (and no doubt overheat the unit). Any ideas?

  Read the article

• Accessing IPv6 router interface from a minimal Fedora installation?

  - by Zack

  I've recently installed Fedora 16 and am trying to set up a simple apache server. The only problem I've run into so far is that I'm unable to access my router's web interface from any box on my network. It assigns addresses via dhcp, and the router always responds to a ping. The server is also picking up an IP from the router on the proper subnet. Now, all I really need to do is forward a port, however I am receiving "Unable to connect" through the web interfaces and "connection refused" via telnet. What are my options, and how might I go about troubleshooting this? Will I need the server's ip to be static in order to change these settings? The router is a "Netopia" model, if that helps.

  Read the article

• Registering OCX on 64-bit Windows 7

  - by Jay

  I want to use MSCOMM control in my MS Excel 2010 VBA. The control shall appear in Tools-> Additional Controls dialog box in VBE of MS Excel 2010. I am trying to register MSCOMM32.OCX on my 64-bit Windows 7 machine. However, as I try to register it using regsvr32 as shown in the command window below, I am getting shown error popup. What am I missing here? Why is this component not getting registered? Or this is not the correct way to include MSCOMM control in MS Excel VBA? I have read following: Registering OCX file manually http://social.msdn.microsoft.com/Forums/en/vbgeneral/thread/1f00d6cc-00a9-4ca0-9698-535e2487af31 But to no avail.

  Read the article

• Samba 3.3 or later on Slackware 12 - how do I make this happen?

  - by caroulia

  I'm trying to upgrade the Samba server on a Slackware 12 box to serve as PDC for Windows 7 32bit machines (it now has a 3.0.3 and does the job for Win XP machines, but 7 refuses to join the domain - I'm posting this after having tried a few dozen hacks on the windows registry). I'm a newbie on Slackware (I usually dwell in Ubuntu) so I may be going about this the wrong way but this is what I've done so far: The Samba wiki has a couple of hacks for the registry and also seems to suggest a version later than 3.3 (though not in so many words) http://wiki.samba.org/index.php/Windows7 Having scoured the net for later Samba binaries for Slackware 12 and gotten precisely nowhere, I decided that maybe I could compile the blessed thing. But I keep on getting compiler errors. I'm using this SlackBuild script http://ftp.twaren.net/Linux/slackware/slackware-current/source/n/samba/samba.SlackBuild Is there a better way to make this happen? (without upgrading the base system? it has so many finely tuned things running that I don't want to mess with the rest of the setup).

  Read the article

• Installing sublime text plugins all at once

  - by James

  Is there a way to install all the sublime text 2 plugins that you would like to install all at once. In Notepad++, there is a plugin manager which lets you install all the plugins you want to install by checking the box next to the plugin name & description. I was wandering if there is something like that for sublime text. For eg, I would like to install Zen Coding, JQuery Package for Sublime Text, Sublime Prefixr, JS Format, SublimeLinter and many other plugins all at once rather than typing each plugin in the Package Control and installing it one by one.

  Read the article

• OS X SMB Connection to Windows Server 2008 R2

  - by Tawm

  I support many Macs that connect to an SMB share on a Windows Server 2008 R2 box. Occasionally I find that the Mac will try to connect and fail. The connection process will skip asking for credentials and there are none stored in keychain's password section. The server logs will show that the user tried to authenticate with invalid credentials. There are also no lingering connections from the server's point of view. The work around that I've found is to use an invalid username or a username that isn't the user's in the connection string for SMB so smb://domain;user@server/share instead of 'smb://server/share' this will force it to use the username I specified which the client doesn't have anything stored for. So it will then pop up the login window where the user changes the username to the correct one and user her password to connect happily. Specific computer in question: 15" MBP running Snow Leopard (10.6.7 or 10.6.8)

  Read the article

• How to install OpenOffice 3.1 in Headless Mode?

  - by Geo

  I need to setup OpenOffice in a linux box that will never have X installed. Every time I run the setup program of the OpenOffice installer it complains that the system does not have an X Terminal. I am using OOo_3.1.0_LinuxIntel_install_wJRE_en-US.tar. I have done this headless install for version 2.4, but we are having some performance issues and we will like to test the 3.1 version. The rpm -i *rpm does not work, since it is also looking for libgnome inside it. We are trying to install the system in a CenOS 5.1. Any ideas are welcome?

  Read the article

• DNS Settings in Cisco Wireless Lan Controllers

  - by Braden

  The WLC is a 2100 series and I have looked back and forth through the entire web interface. Originally the idea was that the gateway should be the DNS controler and the WLC pointed directly at the gateway. For some reason, random clients are having DNS specific issues when it comes to seeing certain shares around the network. The problems are also very intermittent. Aside from going to each box and implementing a static DNS is there ACTUALLY a DNS setting lodged into the WLC settings (and I am being a numpty and can't find them) or am I stuck with performing the config 1 by 1?

  Read the article

• How to change MySQL data directory?

  - by Jonathan Frank

  I want to place my databases in another directory, so I can store them in an ESB (elastic block storage, just a fancy name for a virtualized harddisk) together with my web-apps and other persistent data. I have tried to walk through a tutorial at http://crashmag.net/change-the-default-mysql-data-directory-with-selinux-enabled. Everything seems fine until I type this command: # semanage fcontext -a -t mysqld_db_t "/srv/mysql(/.*)?" Then the command fails and tells me that mysqld_db_t is an invalid SELinux context even if the default MySQL data directory is labelled with this context. I am running Fedora 15 on Virtualbox (behaves like an ordinary x86-compatible box) and Amazon EC2 (based on Xen) so the tutorial should be compatible. It is also worth to mention that turning off SELinux globally or just for the MySQL process is not an option, because such a solution will decrease the security of the system if a hacker gains access to the system via the MySQL server. I have never seen this problem before I changed to the Redhat/Fedora architecture, so it could be a distribution specific issue. Any help is highly appreciated

  Read the article

• ubuntu automount: only mounting drives as root?

  - by glisignoli

  I'm sharing the /mount dir with smb so users on my network can access use drives added to my linux box. Users are able to read files but not write, modify or delete files or directories. I'm using ubuntu 10.04 server edition with halevt installed for usb auto mounting. Afaik halevt is automounting the drives to /media/ but the drives are showing up as: drwxrwxr-x 1 root root 20480 2010-12-29 20:40 disk drwxrwxr-x 1 root root 24576 2010-12-21 17:20 Sparta mount gives me: /dev/sda1 on /boot type ext2 (rw) /dev/sdb1 on /media/disk type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) /dev/sdc1 on /media/Sparta type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) When I umount the drives, the folders /media/disk and /media/Sparta are both removed. I tried changing the permissions with chown to nobody:nogroup but it doesn't work (which I assume is because they are ntfs drives).

  Read the article

• Exchange 2007 to 2010 public folder replication error 1129

  - by Keith

  I currently upgrading from an Exchange server 2007 to 2010. I have moved all mailboxes and OAB. I am having issues replicating the public folders. This is the error I'm getting in the event log on the 2007 box: Error 1129 occurred while processing a replication event. Folder: (6-11ED8367F0C) IPM_SUBTREE\Marketing\Marketing I have looked online and everything about these errors seems to relate from an old 2003 server. Well, we never had a 2003 server. I'm really not sure what to do at this point. Any help?

  Read the article

• Windows / Apache / PHP CPU at 100% under small load

  - by Bart

  I have a Windows box loaded with Apache 2.2 and PHP 5.2. It runs great if only a few users are on it at a time, but under load testing (50 users for test #1), the CPU climbs up to 100%. Nearly all of this CPU usage comes from httpd.exe. I currently have PHP set up via php5_module, but one of the first things I plan to try next is to use FastCGI instead. Is FastCGI better at handling multiple connections? Any other ideas on what might be causing Apache to run so high?

  Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >