Search Results

Search found 23193 results on 928 pages for 'apple remote desktop'.

Page 268/928 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• Homegroup doesn't show other computers, but "Network" does

  - by McPherrinM

  I have a desktop and a laptop (both running windows 7) in my Windows 7 homegroup. The desktop created the homegroup, and the laptop joined it. Both share a few folders. On the laptop, I have no problem accessing the Desktop's shared folders via the "Homegroup" sidebar button in Windows Explorer. However, on the Desktop, I get the message No other homegroup computers are currently available in the homegroup screen. However, if I go to the Network page, I can see the other computer and browse its shared media. These shares were made by right clicking and choosing "Share with Homegroup". I can access the media, so this isn't a big problem, but I'm just confused as to why the Homegroup screen denies the existence of the other computer. Has anybody else encountered and resolved this?

  Read the article

• CREDSSP 500 errors

  - by Andy Milsark

  Hello all, We are experience a 500 http error when trying to run remote powershell on a win 2008 R2 server. I have run enable-wsmancredssp for both client and server roles on this machine. I have also run "winrm quickconfig". Also the allowfreshcredentials delegation group policy is setup correctly as well. There are active listeners running and credssp is enabled for client and service. I can connect with kerberos (by not specifing authentication type), but the following remote powershell command fails: Enter-PSSession -ComputerName serverX -credential domain\user -Authentication Credssp Error: Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 I have not been able to find any useful information on how to troubleshoot this. I have restarted Winrm, rebooted, disabled and re-enabled credssp. Please help.

  Read the article

• Recover backup copy of a ubuntu linux installation on a usb stick using dd

  - by user10826

  Hi, I installed Ubuntu 10.04 on a usb stick in persistent install mode. So I could boot the laptop or my desktop computer with the stick, at boot time. Once I needed the 8GB stick for another purposes so I thought about coyping it to my desktop doing from mac os x: dd if=/dev/disks3s of=/Users/jack/Desktop/usb_copy Now I am trying to do the opposite, after having used the stick, which was formatted to NTFS, just doing dd if=/Users/jack/Desktop/usb_copy of=/dev/disks3s but although I can see that almost of the files are there, I can not boot again. IT is also strange the the file permissions are kind of strange, something like _user What can I do ? Thanks

  Read the article

• post-receive hook permission denied "unable to create file" error

  - by ThomasReggi

  Just got gitolite installed on my webserver and am trying to get a post-receive hook that can point the git dir in apache's direction. This is what my post-receive hook looks like. Got this script from the Using Git to manage a web site. #!/bin/sh echo "post-receive example.com triggered" GIT_WORK_TREE=/srv/sites/example.com/public git checkout -f This is the error response i'm getting back from git push origin master from my local workstation. These are files from within my repository. remote: post-receive example.com triggered remote: error: unable to create file .htaccess (Permission denied) remote: error: unable to create file .tm_sync.config (Permission denied) remote: fatal: cannot create directory at 'application': Permission denied Permissions of public. drwxr-xr-x 5 root root 4096 Jun 26 17:23 public

  Read the article

• Recover backup copy of a ubuntu linux installation on a usb stick using dd

  - by user10826

  Hi, I installed Ubuntu 10.04 on a usb stick in persistent install mode. So I could boot the laptop or my desktop computer with the stick, at boot time. Once I needed the 8GB stick for another purposes so I thought about coyping it to my desktop doing from mac os x: dd if=/dev/disks3s of=/Users/jack/Desktop/usb_copy Now I am trying to do the opposite, after having used the stick, which was formatted to NTFS, just doing dd if=/Users/jack/Desktop/usb_copy of=/dev/disks3s but although I can see that almost of the files are there, I can not boot again. IT is also strange the the file permissions are kind of strange, something like _user What can I do ? Thanks

  Read the article

• netstat on fresh install of Solaris 10 update 9

  - by cjavapro

  I am attempting to decipher the below output bash-3.00$ netstat -a UDP: IPv4 Local Address Remote Address State -------------------- -------------------- ---------- *.sunrpc Idle *.* Unbound *.32771 Idle TCP: IPv4 Local Address Remote Address Swind Send-Q Rwind Recv-Q State -------------------- -------------------- ----- ------ ----- ------ ----------- *.* *.* 0 0 49152 0 IDLE *.sunrpc *.* 0 0 49152 0 LISTEN *.* *.* 0 0 49152 0 IDLE localhost.5987 *.* 0 0 49152 0 LISTEN localhost.898 *.* 0 0 49152 0 LISTEN localhost.32771 *.* 0 0 49152 0 LISTEN localhost.5988 *.* 0 0 49152 0 LISTEN localhost.32772 *.* 0 0 49152 0 LISTEN *.ssh *.* 0 0 49152 0 LISTEN *.32785 *.* 0 0 49152 0 BOUND localhost.6788 *.* 0 0 49152 0 LISTEN localhost.6789 *.* 0 0 49152 0 LISTEN localhost.32782 *.* 0 0 49152 0 LISTEN localhost.smtp *.* 0 0 49152 0 LISTEN localhost.submission *.* 0 0 49152 0 LISTEN server-host-name.ssh pc-host-name.51269 64868 51 49640 0 ESTABLISHED TCP: IPv6 Local Address Remote Address Swind Send-Q Rwind Recv-Q State If --------------------------------- --------------------------------- ----- ------ ----- ------ ----------- ----- *.* *.* 0 0 49152 0 IDLE *.ssh *.* 0 0 49152 0 LISTEN SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED Active UNIX domain sockets Address Type Vnode Conn Local Addr Remote Addr ffffffff84e25ab8 stream-ord ffffffff8569c740 00000000 /var/run/.inetd.uds bash-3.00$ It looks to me like we have the following items UDP IPv4 Open ports sunrpc, 32771 Question 1: What is *.* Unbound? TCP IPv4 Open ports sunrpc, ssh 10 ports open only for localhost The open ssh connection from my PC Question 2: What is *.32785 *.* 0 0 49152 0 BOUND? Question 3: What is *.* *.* 0 0 49152 0 IDLE? (shows up twice) IPv6 Open port ssh Question 3: What is *.* *.* 0 0 49152 0 IDLE? Question 4: What is SCTP? Question 5: What is Active UNIX domain sockets

  Read the article

• Cannot connect to a VPN server - authentication failed with error code 691

  - by stacker

  When trying to connect to a VPN server, I get the 691 error code on the client, which say: Error Description: 691: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server. Now, I validated that the username and password are correct, and tried to login with domain name and without. I also installed a certification to use with the IKEv2 security type. I also validated that the VPN server support security method. But I cannot login. In the server log I get this log: Network Policy Server denied access to a user. The user DomainName\UserName connected from IP address but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server. Any idea of what can I do? Thanks in advance!

  Read the article

• Route traffic on vpn to another interface on an ASA 5510

  - by Dave

  I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site (192.168.200.0) to the 192.168.2.0 subnet on the ASA. I have remote applications I would like the users at the remote site to be able to access which are hosted on the 192.168.3.0 subnet. I can route traffic between the subnets that are located on the ASA. Any way I can route traffic from the remote site to the 192.168.3.0?

  Read the article

• Cisco ASA 5505 (8.05): asymmetrical group-policy filter on an L2L IPSec tunnel

  - by gravyface

  I'm trying to find a way to setup a bi-directional L2L IPSec tunnel, but with differing group-policy filter ACLs for both sides. I have the following filter ACL setup, applied, and working on my tunnel-group: access-list ACME_FILTER extended permit tcp host 10.0.0.254 host 192.168.0.20 eq 22 access-list ACME_FILTER extended permit icmp host 10.0.0.254 host 192.168.0.20 According to the docs, VPN filters are bi-directional, you always specify the remote host first (10.0.0.254), followed by the local host and (optionally) port number, as per the documentation. However, I do not want the remote host to be able to access my local host's TCP port 22 (SSH) because there's no requirement to do so -- there's only a requirement for my host to access the remote host's SFTP server, not vice-versa. But since these filter ACLs are bidirectional, line 1 is also permitting the remote host to access my host's SSH Server. The documentation I'm reading doesn't seem to clear to me if this is possible; help/clarification much appreciated.

  Read the article

• HTTP traffic through PIX VPN from outside site

  - by fwrawx

  I have a remote site with a website that only allows access from the outside IP assigned to our local PIX. I have users connecting to the local networking using a VPN that need to be able to view this remote site. I don't think this works because the packets want to come in and go out over the same (ext) interface. So I'm looking for a way to make this work using the PIX or setting up a service on a server on the local network to act as a middle-man for the HTTP requests. The remote site doesn't support setting up a VPN to our PIX. The remote website is dishing out pages over a non-standard port. Can I use squid or something similar to proxy just one site?

  Read the article

• Mapping an sFTP connection to a Windows drive?

  - by Nicolas

  I'm looking for a way to map an sFTP connection to a Windows (Vista) drive. In other words, a tool that would add a new drive (let's say N:) to my computer, that would directly point to my remote server via sFTP. That way, "N:\my_dir\file.txt" would actually be something like "/home/user/my_dir/file.txt" on the remote server. Reading the file on Windows would download it, and writing content in it would upload it...network transfers being made via sFTP. I'm aware of Novell NetDrive, but it has various issues with long filenames, and seems to corrupt UTF-8 files content depending on the BOM. Do you know about any reliable alternative ? Thanks ! Edit : I have complete control of the remote server, except that it's remote enough for me not to be able to physically access it.

  Read the article

• After each command tmux prints: ps1_update: command not found

  - by B.I.

  On Linux Ubuntu 11.04, after each command (cd, ls, vim...) successful or not, tmux prints out as a last line ps1_update: command not found. Is there any config option I am missing? Thank you very much! tmux.conf # http://lukaszwrobel.pl/blog/tmux-tutorial-split-terminal-windows-easily # just remember that after every modification, tmux must be refreshed # to take new settings into account. # This can be achieved either by restarting it or by typing in: # tmux source-file .tmux.conf # Here is a list of a few basic tmux commands: # Ctrl+b " - split pane horizontally. # Ctrl+b % - split pane vertically. # Ctrl+b arrow key - switch pane. # Hold Ctrl+b, don't release it and hold one of the arrow keys - resize pane. # !Ctrl+b c - (c)reate a new window. # !Ctrl+b n - move to the (n)ext window. # Ctrl+b p - move to the (p)revious window. # Shift+LMB - select text. # ALT+Arrows to move among panes. # rebind default prefix to C-a unbind C-b set -g prefix C-a # use ALT+Arrows to move around panes bind -n M-Left select-pane -L bind -n M-Right select-pane -R bind -n M-Up select-pane -U bind -n M-Down select-pane -D # activity monitoring setw -g monitor-activity on set -g visual-activity on # highlight current pane set-window-option -g window-status-current-bg yellow # enable pane switching with mouse set-option -g mouse-select-pane on # read bashrc source ~/.bashrc # Sane scrolling set -g terminal-overrides 'xterm*:smcup@:rmcup@' commandline print out ($(cat)user@tiki:~/.vim$ ls autoload bash_profile bashrc bundle README.md tmux.conf vimrc xmonad xmonad-ubuntu-conf xsessionrc ps1_update: command not found ($(cat)user@tiki:~/.vim$ ll total 56 drwxrwxr-x 2 user user 4096 Mar 17 10:20 autoload/ -rw-rw-r-- 1 user user 170 Mar 17 10:20 bash_profile -rw-rw-r-- 1 user user 4004 Apr 2 11:37 bashrc drwxrwxr-x 20 user user 4096 Aug 20 10:55 bundle/ -rw-rw-r-- 1 user user 11170 Aug 20 11:24 README.md -rw-rw-r-- 1 user user 1243 Mar 17 10:20 tmux.conf ps1_update: command not found ($(cat)user@tiki:~/.vim$ And the following is plain terminal output, without tmux running user@tiki:~$ ls backup_list.md Documents Dropbox examples.desktop hakers_and_painters.md~ hyundai Music projects ror Ubuntu One Videos windows.sh Desktop Downloads elif.txt hakers_and_painters.md help.txt maqola.txt Pictures Public tmp update_background.sh VirtualBox VMs user@tiki:~$ ll total 116 -rw-rw-r-- 1 user user 380 Aug 9 17:34 backup_list.md drwxr-xr-x 6 user user 4096 Jul 15 09:26 Desktop/ drwxr-xr-x 2 user user 4096 Jul 7 11:26 Documents/ drwxr-xr-x 11 user user 20480 Aug 20 13:53 Downloads/ -rwx------ 1 user user 729 May 7 14:45 update_background.sh* drwxr-xr-x 2 user user 4096 Dec 10 2013 Videos/ drwxrwxr-x 4 user user 4096 Sep 10 2013 VirtualBox VMs/ -rwxrwxr-x 1 user user 36 Jan 11 2014 windows.sh* user@tiki:~$ cd Desktop/ user@tiki:~/Desktop$ ll total 36 -rw-rw-r-- 1 user user 3388 Jul 14 17:10 daily--report.md -rw-rw-r-- 1 user user 71 Jan 28 2014 fernandez readme.md -rw-rw-r-- 1 user user 23 Jan 28 2014 fernandez readme.md~ drwx------ 4 user user 4096 Mar 23 14:02 my_docs/ drwx------ 2 user user 4096 Feb 3 2014 Origami/ drwx------ 7 user user 4096 Feb 1 2013 Plants_vs._Zombies_v1.2.0.1065/ -rwxr-xr-x 1 user user 301 Apr 15 11:28 Sky Fight.desktop* drwx------ 2 user user 4096 Feb 11 2014 webdesign/ -rwxrwxr-x 1 user user 26 Jan 11 2014 windows.sh~* user@tiki:~/Desktop$

  Read the article

• What seems to be plaguing my hard drives?

  - by Craig

  In a little bit of a tech nightmare here. I know oodles about software, not so much more than the above average user about hardware. I recently had to toss an old desktop of mine. It was gradually getting slower and slower, and after shutting the desktop down for long periods of time, it would choke up upon startup. Sometimes it'd give a disk read error, sometimes say no OS was found, etc. Restarting it about 5-15 times would eventually boot properly. Weird. I also noticed that startup programs were going missing, Dropbox was reindexing my entire folder, and Backblaze was backing up less than the number of files that it should. This lead me to believe it was probably a hard drive issue. I began to wonder why I'd have hard drive issues, and came to closure when I assumed it was because of recent power surges and outages. I'm sure that does a number on the drive. I bought a new desktop recently. It's not a beast or anything, but it's enough for what I do. It's an eMachines (I know, I know) Ultra-Slim (http://www.amazon.com/eMachines-Ultra-Slim-ER1401-57-Desktop-PC/dp/B00475OG9U). This is ideal for me because it's small and portable. It comes with an AC adapter and battery, like a laptop. Just to be safe, I bought an uninterruptable power supply on top of that. It's basically protected completely from any outages that might scramble the drive. I set this up a few days ago and for the past few days I've been perfecting settings, downloading the usual applications, etc. Two days ago, I noticed Dropbox was reindexing my entire Dropbox folder. I installed both Dropbox and Backblaze on this system, but it is very much more lightweight than the other. Only about 15 third-party applications installed. I thought that maybe Dropbox and Backblaze were stressing my system, so I turned off Backblaze. Still, Dropbox runs and comes across this infinite reindex issue. I noticed that upon a reboot recently, two applications did not start on startup either. Also, much like my old desktop, every 3rd or 4th reboot, I'll be forced into a chkdsk. This makes me incredibly nervous. What could possibly be going wrong with my old, years-old desktop that is immediately causing the same issues to my new one? I've considered all of the basics. I'm in a very air conditioned room. I take run routine virus scans. I'd like to think I take care of my systems very well. What is this issue that is haunting me? There's always the possibility that this new desktop has a junk hard drive, but it just seems way too coincidental.

  Read the article

• best practices for setting up a new windows 2008 R2 server with ec2 AWS

  - by Alex

  Can someone comment what they would add to the following list of SOP in terms of best practices? This is being set up on AWS, and then after further testing, back in our datacenter. Standard Operation Procedure (SOP): Installation Part: 2 - Installation of Software Components in Windows 2008 R2 (Updated). Step: 1 Logon to the host through Remote Desktop. Strp: 2 Open Server Manager - Server Roles - Install Web Server IIS 7.5 with compatible of IIS 6 features and Management compatibility mode. Step: 3 Open IE/Mozilla to Download the below listed software's and save all installation files to folder called "AWS Server Install Files" for future reference.. Net Framework 2.0 (Download that from internet) Crystal reports for .Net Framework 2.0 (x64) (Download that from internet) SQL Server 2005 (AWS Image) Step: 4 Once all software's saved on local drive, then Install it one by one. Step: 5 Navigate to Desktop folder to install the below listed softwares. Microsoft Asp.net 2.0 AjaxExtention 1.0 (placed on Desktop \Softwares) WebEx recorder. (placed on Desktop \Softwares) Winrar(placed on Desktop \Softwares) Step: 6 Make sure all the software are working fine. Step: 7 Inspect the server once entirely. Step: 8 Logoff & Stop the Instance.

  Read the article

• Windows 8.1 Professional Hyper-V - can I create my own linux VM through it?

  - by KevinM1

  I have a Windows 8.1 Professional desktop, and would like to have a Linux Mint VM on it so I can do some opensource web development work. I've tried VirtualBox, but it's giving me an IO error during the Mint .iso installation. VMWare Player flat out tells me it can't install because I have Hyper-V on my machine by default. My biggest concern is nuking the desktop, which is where I do most of my non-development work/browsing/etc. The desktop seems to be listed as a VM itself in the Hyper-V Manager, and I don't want to accidentally break it. So, two questions: Can I create the Mint VM I want/need for my work? Can I do it without messing up the desktop?

  Read the article

• Windows 7 file sharing password protecting or making stuff available to just me

  - by Carbonara

  Even with the new Homegroup feature I'm still finding the way Windows deals with folder sharing utterly baffling. Here's what I want to do. I have two computers, a PC Desktop and a laptop. I also live in a shared flat with other computer users. I have set up a Homegroup and a Workgroup on the desktop and joined them on the laptop and in the home group I have shared video, music and pictures. This is so that anyone on the network can view pictures and listen to music etc. But I want my Documents folder from my desktop to only be available to me on my laptop and not to anyone else that may be on the network. The Homegroup only allows (from what I can gather from the baffling array of options) sharing with everyone or no one. Is it possible to only allow the laptop to access the documents folder on the desktop? The user name and password are the same on both computers.

  Read the article

• How to create a static IP on Windows Server 2008 R2 so I can access the server remotely

  - by Aesir

  I have just purchased a HP Proliant N40L which I am intending to use as a NAS, learning tool and just in general something to mess around with. As a student via the Microsoft dreamspark program I can get a free copy of Windows Server 2008 R2 which I am using as the OS. So that I can remote to the box from outside of my local network and so that I can stream media from it to my PS3, I have read that I need to create a static IP for the server and use port forwarding to forward to this IP so I can remote in. Is this correct? I am not really sure how to do this and if I need to make these changes on my router configuration, on the OS or both. I am a novice when it comes to networking however most resources for Windows server 2008 R2 seem to assume a fair amount of experience already. I realise that using this particular OS may seem like overkill for what I currently wish to do with it (stream content to other devices and backup) but as I can get a copy for free it seems sensible. Edit: From reading answers posted I feel I should give more information. I have now tried to add a static IP address using my router configuration settings. I have used the getmac command to get the mac address of the server. My ISP is Virgin Media and I have gone to the LAN IP section and I have added an IP address to the DHCP Reservation Lease Info. I can now use remote desktop connection internally to remote to the server (so I am assuming assigning this IP has worked). How do I configure this on the OS as well? I am also unsure on how I would remote to this machine outside of my local network?

  Read the article

• Creating a folder named after the current date and time

  - by lowerkey

  I'm trying to create a powershell script that creates a new folder with the current date (formatted as yyyy-MM-dd) as a name. Here's what I have so far: PS C:\Users\me\Desktop> powershell.exe -command "new-item ($(get-location) + (Get-Date).year + "-" + (Get-Date).month + "-" + (Get-Date).day) -type directo ry" Die Benennung "C:\Users\me\Desktop" wurde nicht als Name eines Cmdlet, ein er Funktion, einer Skriptdatei oder eines ausführbaren Programms erkannt. Überp rüfen Sie die Schreibweise des Namens, oder ob der Pfad korrekt ist (sofern ent halten), und wiederholen Sie den Vorgang. Bei Zeile:1 Zeichen:35 + new-item (C:\Users\me\Desktop <<<< + (Get-Date).year + - + (Get-Date). month + - + (Get-Date).day) -type directory + CategoryInfo : ObjectNotFound: (C:\Users\j.moore\Desktop:String ) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException

  Read the article

• Can't find PC on network

  - by Simon Verbeke

  I just got myself a new laptop, and set it up. It is connected to the wireless internet in my home. I then wanted to create a homegroup between the laptop and my desktop, but they can't find each other. Probably because the desktop has a wired connection to the router and the laptop is connected to a wireless access point. The router and the AP are connected to a switch in the middle by cable. A sketch of the network: Laptop - - - Wireless Access Point ----- Switch ----- Router ----- Desktop ^ ^ ^ ^ Wireless Wired Wired Wired They both point to the same gateway and DHCP-server (on 192.168.0.1). And I can ping to that address from both PCs. When I try to ping either of the PCs the pings time out. The subnets are also the same (255.255.255.0) and the IPs are in the same range (192.168.0.114 laptop, 192.168.0.205 desktop). So I don't really understand what I need to do to be able to access either computer from the other. The weird thing is that Synergy (to use mouse and keyboard over the network) works, just by using the IPs assigned to both PCs. The acces point is a linksys WAP54g, but I'm unsure of the Router, it has a custom casing from our ISP and hides any clues for identifying the product. I'm going to google a bit so I can add that info later. Both PC's are Windows 7 64 bit. The desktop is Ultimate, the laptop Professional.

  Read the article

• Offlineimap -- push changes to all folders; only pull from INBOX folder

  - by g33kz0r

  I would like to be able to set up offlineimap to do the following Sync Remote/INBOX - Local Sync Local/Maildirs/* - Remote Possible? The use case here is: I download all new mail from my remote IMAP INBOX folder with offlineimap. offlineimap's posthook command calls a custom python script which does junk filtering, then sorts and categorizes my mail in the local INBOX folder to various local maildirs based on sender, etc. I read my mail with mutt and perhaps do some more categorization. ? Step 4 is what I'm after. I want offlineimap to push my local changes (categorization, filtering, deletion in the case of spam) back to the various folders on the imap server, but as you can see, there's no need for me to be pulling any changes from folders other than Remote/INBOX, as no changes happen on the IMAP server itself. I hope that's a clear explanation of the problem.

  Read the article

• Windows 7: Edit group policy from command line

  - by user234461

  I'm writing an installer and need to change all users' wallpaper. I can do this from the group policy editor GUI, but need to do so from my installer. I can't just edit the registry as it gets reset by a GPO on login. How do I apply the relevant administrative template via programatically (preferably cmd.exe or via the registry)? (for interest, it's User Configuration Administrative Templates Desktop Desktop Desktop Wallpaper [sic] Any help would be appreciated. Thanks!

  Read the article

• Secure copy uucp style

  - by Alexander Janssen

  I often have the case that I have to make a lot of hops to the remote host, just because there is no direct routing between my client and the remote host. When I need to copy files from a remote host two or more hops away, I always have to: client$ ssh host1 host1$ ssh host2 host2$ scp host3:/myfile . host2$ exit host1$ scp host2:myfile . host1$ exit client$ scp host1:myfile . Back when uucp still was being used this would be as simple as a uucp host1!host2!host3 /myfile . I know that there's uucp over ssh, but unfortunately I don't have the proper privileges on those machines to set it up. Also, I'm not sure if I really want to fiddle around with customer's machines. Does anyone know of a method doing this tasks without the need to setup a lot of tunnels or deploying new software to remote hosts? Maybe some kind of recursive script which clones itself to all the remote hosts, doing the hard work for me? Assume that authentication takes place with public keys and that all hosts do SSH Agent Forwarding. Edit: I'm not looking for a way to automatically forwarding my interactive sesssion to the nexthop host. I want a solution to copy files bangpath-style using scp via multiple hops without the need to install uucp on any of those machines. I don't have the (legal) rights or the privileges to make permanent changes to the ssh-config. Also, I'm sharing this username and hosts with a lot of other people. I'm willing to hack up my own script, but I wanted to know if anyone knows something which already does it. Minimum-invasive changes to hosts on the bangpath, simple invocation from the client. Edit 2: To give you an impression of how it's properly been done in interactive sessions, have a look at the GXPC clustershell. This is basically a Python-script, which spwans itself over to all remote hosts which have connectivity and where your ssh-key is installed. The great thing about it is, that you can tell "I can reach HostC via HostB via HostA." It just works. I want to have this for scp.

  Read the article

• Prevent Xbox users from editing Media Library

  - by Patrick

  I am trying to watch some videos stored on my desktop computer on the Xbox, but they are in a format that the Xbox cannot decode, so I have to stream them through Windows Media Center. However, as soon as I set up Media Center on the Xbox, anyone can go in and browse the directory structure on my desktop. I would like to "lock" the media library so that only I can add and delete folders from my desktop computer. Is it possible?

  Read the article

• Windows 7: This notification icon is currently not active

  - by icelava

  Some time this week, without any major change done to one of my x64 Windows 7 computers, the Media eject icon goes missing in the systray taskbar area. When I attempt to reset the notification settings, i see this "This notification icon is currently not active" info warning Initially KB945011 managed to restore the icon after a reboot. But now it appears to have disappeared again. It seems to have disappeared (cannot really confirm) after I unlock the physical logon session (which was previously rerouted to a virtual Remote Desktop session). Anybody have knowledge on possible causes to this missing behaviour? UPDATE 1 Feb 11 It seems that happens often when I remote desktop to the computer, I see it from the remote screen, but when i unlock the screen physically, it disappears. It would reappear when I connect to remote desktop again. Hmmmmm.

  Read the article

• Onboard Ethernet suddenly stopped working to router

  - by AfterschoolHobbist

  Hey guys, yesterday I have a sudden problem of my Ethernet connection to my router. My computer is a Pendium 4 with Window XP SP3 running on it and it was working fine earlier in the day, but yesterday night was the start of the problem. My computer is unable to ping to the router and to any other website and unable to get internet connection. As beside it was connected to a hub, I directly connected it to the router directly and the same problem occurred, being unable to ping to the router (and connecting to it) and still no internet access. My directly connected to the modem and the problem still persisted. For each connection, I connected it to my computer and my laptop and my laptop was able to connect, while my desktop computer was unable. I wondered if it was a OS issue and ran a live Ubuntu CD to see if Ubuntu was able to connect to the internet, but the issue persisted and I was unable to get internet access. I then set my router's lease time to 1 hour and waited. After 1 hour, the lease for my computer was removed and I hoped this worked, but it didn't work, but something strange is acting up. My desktop computer is still unable to ping to the router or connect to the internet, but for some reason, my router and desktop computer is still able to contact each other by providing a lease of an local ip address. The router record of a lease to my desktop computer, and when I do ipconfig, my desktop also recognize that it has been provided a local ip address. I have concluded that this is a hardware issue and the only solution to fix this is to by a network card adapter, but I am wondering if anyone has any solutions that could explain why this happen, why my mac address is 01-23-45-67-89-ab, and is there any way to fix it without buying a new network card? Thanks in advance.

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >