Search Results

Search found 7051 results on 283 pages for 'updates'.

Page 268/283 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• Fix Problems Upgrading Office 2010 Beta to RTM (Final) Release

  - by Mysticgeek

  There are several scenarios where you may run into trouble uninstalling the 2010 Beta and trying to install the RTM (final) release. Today we’ll cover the problems we ran into, and how to fix them. You would think upgrading from the Office 2010 Beta to the final release would be an easy process. Unfortunately, it’s not always that simple. In fact, we ran into three different scenarios where the install wasn’t smooth whatsoever. If you currently have the 2010 Beta installed, you have to remove it before you can install the RTM.  Here we’ll take a look at three different troublesome install scenarios we ran into, and how we fixed each one. Important Note: Before proceeding with any of these steps, make sure and backup your Outlook .pst files! Scenario 1 – Uninstall Office 2010 Beta & Fix Install Errors In this first scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. First try to uninstall the Office 2010 Beta by going into Control Panel and selecting Programs and Features. Scroll down to Microsoft Office Professional Plus 2010, right-click it and select Uninstall. Click Yes when the confirmation dialog box comes up. Wait while Office 2010 Beta uninstalls…the amount of time it takes will vary from system to system. To complete the uninstall process, a reboot is required. Fixing Setup Errors The problem is when you start the installation of the 2010 RTM… You get the following setup error even though you uninstalled the 2010 Beta. The problem is there are leftover Office apps or stand alone Office products. So, we need a utility that will clean them up for us.   Windows Installer Clean Up Utility Download and install the Clean Up Utility (link Below) following the defaults. After it’s installed you’ll find it in Start \ All Programs \ Windows Install Clean Up …go ahead and launch the utility. Now go through and remove all Office Programs or addins that you find in the list. Make sure you are just deleting Office apps and not something you need like Java for example. If you’re not sure what something is, doing a quick Google search should help you out. For instance we had the Office labs Ribbon Hero installed… just highlight and click Remove. Remove anything that has something to do with Office…then reboot your machine. Now, you should be able to begin the installation of Office 2010 RTM (Final) Release without any errors. If you do get an error during the install process, like this one telling us we have old version of Groove Server… Navigate to C:\Users\username\AppData\Local\Microsoft (where username is the computer name) and delete any existing MS Office folders. Then try the install again, this solved the problem in our first scenario. Scenario 2 – Not Being Able to Uninstall 2010 Beta from Programs and Features In this next scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. Another problem we ran into is not being able to uninstall the 2010 Beta from Programs and Features. When you go in to uninstall it, nothing happens. If you run into this problem, we again need to download and install the Windows Installer Clean Up Utility (link below) and manually uninstall the Beta. When you launch it, scroll down to Microsoft Office Professional Plus 2010 (Beta), highlight it and click Remove.   Click OK to the Warning Dialog box… If you see any other Office 2010, 2007, or 2003 entries you can hold the “Shift” key and highlight them all…then click Remove and click OK to the warning dialog. Now we need to delete some Registry settings. Click on Start and type regedit into the Search box and hit Enter. Navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. Now go into C:\Program Files and find any of these three folders…Microsoft Office, OfficeUpdate, or OfficeUpdate14…you might find one, two or all three. Either way just rename the folders with “_OLD” (without quotes) at the end. Then go into C:\Users\username\AppData\Local\Microsoft and delete any existing MS Office folders. Where in this example we have office, Office Labs, One Note…etc. Now we want to delete the contents of the Temp folder. Click on Start and type %temp% into the Search box and hit Enter. Use the key combination “Ctrl+A” to select all the files in this folder, then right-click and click Delete, or simply hit the Delete key. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. When you get back from the restart launch the Office 2010 RTM installer and you should be good to go with installation. Because we uninstalled the Office 2010 Beta manually, you may have some lingering blank icons that you’ll need to clean up. Scenario –3 Uninstall 2007 and Install 2010 32-Bit on x64 Windows 7 For this final scenario we are uninstalling Office Professional 2007 and installing Office Professional Plus 2010 32-Bit edition on a Windows Ultimate 64-bit computer. This machine actually had Office 2010 Beta 64-bit installed at one point also, it’s since been removed, and 2007 was reinstalled.  Go into Programs and Settings and uninstall Microsoft Office Professional 2007. Click Yes to the dialog box asking if you’re sure you want to uninstall it… Then wait while Office 2007 is uninstalled. The amount of time it takes will vary between systems. A restart is required to complete the process… Again we need to call upon the Windows Installer Clean Up Utility. Go through and delete any left over Office 2007 and 2010 entries. Click OK to the warning dialog that comes up. After that’s complete, navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. We still need to go into C:\Users\ username\AppData\ Local\ Microsoft (where username is the computer name) and delete any Office folders. In this example we have Outlook Connector, Office, and Outlook to delete. Now let’s delete the contents of the Temp folder by typing %temp% into the Search box in the Start Menu. Then delete all of the files and folders in the Temp directory. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. If you try to install the 2010 RTM at this point you might be able to begin the install, but may get the following Error 1402 message. To solve this issue, we opened the command prompt and ran the following: secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose After the command completes, kick off the Office 2010 (Final) RTM 32-bit edition. This solved the issue and Office 2010 installed successfully.   Conclusion Except for the final scenario, we found using the Windows Installer Clean Up Utility to come in very handy. Using that along with deleting a couple folders and registry settings did the trick. In the last one, we had to get a bit more geeky and use some command line magic, but it got the job done. After some extensive testing in our labs, the only time the upgrade to the RTM went smoothly was when we had a clean Vista or Windows 7 system with a fresh install of the 2010 beta only. However, chances are you went from 2003 or 2007 to the free 2010 Beta. You might also have addins or other Office products installed, so there are going to be a lot of different office files scattered throughout your PC. If that’s the case, you may run into the issues we covered here. These are a few scenarios where we got errors and were not able to install Office 2010 after removing the beta. There could be other problems, and if any of you have experienced different issues or have more good suggestions, leave a comment and let us know! Link Download Windows Installer Clean Up Utility Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007How to Upgrade the Windows 7 RC to RTM (Final Release)Upgrading Ubuntu from Dapper to Edgy with Update ManagerDisable Office 2010 Beta Send-a-Smile from StartupAdd or Remove Apps from the Microsoft Office 2007 or 2010 Suite TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

  Read the article

• MySQL Connect: What to Expect From the Wondrous Land of MySQL Cluster

  - by Mat Keep

  The MySQL Connect conference is only a couple of weeks away, with MySQL engineers, support teams, consultants and community aces busy putting the final touches to their talks. There will be many exciting new announcements and sharing of best practices at the conference, covering the range of MySQL technologies. MySQL Cluster will a big part of this, so I wanted to share some key sessions for those of you who plan on attending, as well as some resources for those who are not lucky enough to be able to make the trip, but who can't afford to miss the key news. Of course, this is no substitute to actually being there….and the good news is that registration is still open ;-) Roadmap: Whats New in MySQL Cluster Saturday 29th, 1300-1400, in Golden Gate room 5.                                                                                        Bernd Ocklin, director of MySQL Cluster development, and myself will be taking a look at what follows the latest MySQL Cluster 7.2 release. I don't want to give to much away - lets just say its not often you can add powerful new functionality to a product while at the same time making life radically simpler for its users. For those not making it to the Conference, a live webinar repeating the talk is scheduled for Thursday 25th October at 09.00 pacific time. Hold the date, registration will be open for that soon and published to our MySQL Webinars page Best Practices Getting Started with MySQL Cluster, Hands-On Lab Saturday 29th, 1600-1700, in Plaza Room A.                                                              Santo Leto, one of our lead MySQL Cluster support engineers, regularly works with users new to MySQL Cluster, assisting them in installation, configuration, scaling, etc. In this lab, Santo will share best-practices in getting started. Delivering Breakthrough Performance with MySQL Cluster Saturday 29th, 1730-1830, in Golden Gate room 5. Frazer Clement, lead MySQL Cluster software engineer, will demonstrate how to translate the awesome Cluster benchmarks (remember 1 BILLION UPDATEs per minute ?!) into real-world performance. You can also get some best practices from our new MySQL Cluster performance guide  MySQL Cluster BoF Saturday 29th, 1900-2000, room Golden Gate 5.                                                                                                           Come and get a demonstration of new tools for the installation and configuration of MySQL Cluster, and spend time with the engineering team discussing any questions or issues you may have. Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster Sunday 30th, 1145 - 1245, in Golden Gate room 7.   In this session, JD Duncan and Andrew Morgan will present how to get started with both Memcached and new NoSQL APIs. JD and I recently ran a webinar demonstrating how to build simple Twitter-like services with Memcached and MySQL Cluster. The replay is available for download.  Case Studies: MySQL Cluster @ El Chavo, Latin America’s #1 Facebook Game Sunday 30th, 1745 - 1845, in Golden Gate room 4.                             Playful Play deployed MySQL Cluster CGE to power their market leading social game. This session will discuss the challenges they faced, why they selected MySQL Cluster and their experiences to date. You can read more about Playful Play and MySQL Cluster here  A Journey into NoSQLand: MySQL’s NoSQL Implementation Sunday 30th, 1345 - 1445, in Golden Gate room 4.                                          Lig Turmelle, web DBA at Kaplan Professional and esteemed Oracle Ace, will discuss her experiences working with the NoSQL interfaces for both MySQL Cluster and InnoDB Evaluating MySQL HA Alternatives Saturday 29th, 1430-1530, room Golden Gate 5                                                                                   Henrik Ingo, former member of the MySQL sales engineering team, will provide an overview of various HA technologies for MySQL, starting with replication, progressing to InnoDB, Galera and MySQL Cluster What about the other stuff? Of course MySQL Connect has much, much more than MySQL Cluster. There will be lots on replication (which I'll blog about soon), MySQL 5.6, InnoDB, cloud, etc, etc. Take a look at the full Content Catalog to see more. If you are attending, I hope to see you at one of the Cluster sessions...and remember, registration is still open

  Read the article

• Cleaner HTML Markup with ASP.NET 4 Web Forms - Client IDs (VS 2010 and .NET 4.0 Series)

  - by ScottGu

  This is the sixteenth in a series of blog posts I’m doing on the upcoming VS 2010 and .NET 4 release. Today’s post is the first of a few blog posts I’ll be doing that talk about some of the important changes we’ve made to make Web Forms in ASP.NET 4 generate clean, standards-compliant, CSS-friendly markup.  Today I’ll cover the work we are doing to provide better control over the “ID” attributes rendered by server controls to the client. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Clean, Standards-Based, CSS-Friendly Markup One of the common complaints developers have often had with ASP.NET Web Forms is that when using server controls they don’t have the ability to easily generate clean, CSS-friendly output and markup.  Some of the specific complaints with previous ASP.NET releases include: Auto-generated ID attributes within HTML make it hard to write JavaScript and style with CSS Use of tables instead of semantic markup for certain controls (in particular the asp:menu control) make styling ugly Some controls render inline style properties even if no style property on the control has been set ViewState can often be bigger than ideal ASP.NET 4 provides better support for building standards-compliant pages out of the box.  The built-in <asp:> server controls with ASP.NET 4 now generate cleaner markup and support CSS styling – and help address all of the above issues.  Markup Compatibility When Upgrading Existing ASP.NET Web Forms Applications A common question people often ask when hearing about the cleaner markup coming with ASP.NET 4 is “Great - but what about my existing applications?  Will these changes/improvements break things when I upgrade?” To help ensure that we don’t break assumptions around markup and styling with existing ASP.NET Web Forms applications, we’ve enabled a configuration flag – controlRenderingCompatbilityVersion – within web.config that let’s you decide if you want to use the new cleaner markup approach that is the default with new ASP.NET 4 applications, or for compatibility reasons render the same markup that previous versions of ASP.NET used:   When the controlRenderingCompatbilityVersion flag is set to “3.5” your application and server controls will by default render output using the same markup generation used with VS 2008 and .NET 3.5.  When the controlRenderingCompatbilityVersion flag is set to “4.0” your application and server controls will strictly adhere to the XHTML 1.1 specification, have cleaner client IDs, render with semantic correctness in mind, and have extraneous inline styles removed. This flag defaults to 4.0 for all new ASP.NET Web Forms applications built using ASP.NET 4. Any previous application that is upgraded using VS 2010 will have the controlRenderingCompatbilityVersion flag automatically set to 3.5 by the upgrade wizard to ensure backwards compatibility.  You can then optionally change it (either at the application level, or scope it within the web.config file to be on a per page or directory level) if you move your pages to use CSS and take advantage of the new markup rendering. Today’s Cleaner Markup Topic: Client IDs The ability to have clean, predictable, ID attributes on rendered HTML elements is something developers have long asked for with Web Forms (ID values like “ctl00_ContentPlaceholder1_ListView1_ctrl0_Label1” are not very popular).  Having control over the ID values rendered helps make it much easier to write client-side JavaScript against the output, makes it easier to style elements using CSS, and on large pages can help reduce the overall size of the markup generated. New ClientIDMode Property on Controls ASP.NET 4 supports a new ClientIDMode property on the Control base class.  The ClientIDMode property indicates how controls should generate client ID values when they render.  The ClientIDMode property supports four possible values: AutoID—Renders the output as in .NET 3.5 (auto-generated IDs which will still render prefixes like ctrl00 for compatibility) Predictable (Default)— Trims any “ctl00” ID string and if a list/container control concatenates child ids (example: id=”ParentControl_ChildControl”) Static—Hands over full ID naming control to the developer – whatever they set as the ID of the control is what is rendered (example: id=”JustMyId”) Inherit—Tells the control to defer to the naming behavior mode of the parent container control The ClientIDMode property can be set directly on individual controls (or within container controls – in which case the controls within them will by default inherit the setting): Or it can be specified at a page or usercontrol level (using the <%@ Page %> or <%@ Control %> directives) – in which case controls within the pages/usercontrols inherit the setting (and can optionally override it): Or it can be set within the web.config file of an application – in which case pages within the application inherit the setting (and can optionally override it): This gives you the flexibility to customize/override the naming behavior however you want. Example: Using the ClientIDMode property to control the IDs of Non-List Controls Let’s take a look at how we can use the new ClientIDMode property to control the rendering of “ID” elements within a page.  To help illustrate this we can create a simple page called “SingleControlExample.aspx” that is based on a master-page called “Site.Master”, and which has a single <asp:label> control with an ID of “Message” that is contained with an <asp:content> container control called “MainContent”: Within our code-behind we’ll then add some simple code like below to dynamically populate the Label’s Text property at runtime:   If we were running this application using ASP.NET 3.5 (or had our ASP.NET 4 application configured to run using 3.5 rendering or ClientIDMode=AutoID), then the generated markup sent down to the client would look like below: This ID is unique (which is good) – but rather ugly because of the “ct100” prefix (which is bad). Markup Rendering when using ASP.NET 4 and the ClientIDMode is set to “Predictable” With ASP.NET 4, server controls by default now render their ID’s using ClientIDMode=”Predictable”.  This helps ensure that ID values are still unique and don’t conflict on a page, but at the same time it makes the IDs less verbose and more predictable.  This means that the generated markup of our <asp:label> control above will by default now look like below with ASP.NET 4: Notice that the “ct100” prefix is gone. Because the “Message” control is embedded within a “MainContent” container control, by default it’s ID will be prefixed “MainContent_Message” to avoid potential collisions with other controls elsewhere within the page. Markup Rendering when using ASP.NET 4 and the ClientIDMode is set to “Static” Sometimes you don’t want your ID values to be nested hierarchically, though, and instead just want the ID rendered to be whatever value you set it as.  To enable this you can now use ClientIDMode=static, in which case the ID rendered will be exactly the same as what you set it on the server-side on your control.  This will cause the below markup to be rendered with ASP.NET 4: This option now gives you the ability to completely control the client ID values sent down by controls. Example: Using the ClientIDMode property to control the IDs of Data-Bound List Controls Data-bound list/grid controls have historically been the hardest to use/style when it comes to working with Web Form’s automatically generated IDs.  Let’s now take a look at a scenario where we’ll customize the ID’s rendered using a ListView control with ASP.NET 4. The code snippet below is an example of a ListView control that displays the contents of a data-bound collection — in this case, airports: We can then write code like below within our code-behind to dynamically databind a list of airports to the ListView above: At runtime this will then by default generate a <ul> list of airports like below.  Note that because the <ul> and <li> elements in the ListView’s template are not server controls, no IDs are rendered in our markup: Adding Client ID’s to Each Row Item Now, let’s say that we wanted to add client-ID’s to the output so that we can programmatically access each <li> via JavaScript.  We want these ID’s to be unique, predictable, and identifiable. A first approach would be to mark each <li> element within the template as being a server control (by giving it a runat=server attribute) and by giving each one an id of “airport”: By default ASP.NET 4 will now render clean IDs like below (no ctl001-like ids are rendered):   Using the ClientIDRowSuffix Property Our template above now generates unique ID’s for each <li> element – but if we are going to access them programmatically on the client using JavaScript we might want to instead have the ID’s contain the airport code within them to make them easier to reference.  The good news is that we can easily do this by taking advantage of the new ClientIDRowSuffix property on databound controls in ASP.NET 4 to better control the ID’s of our individual row elements. To do this, we’ll set the ClientIDRowSuffix property to “Code” on our ListView control.  This tells the ListView to use the databound “Code” property from our Airport class when generating the ID: And now instead of having row suffixes like “1”, “2”, and “3”, we’ll instead have the Airport.Code value embedded within the IDs (e.g: _CLE, _CAK, _PDX, etc): You can use this ClientIDRowSuffix approach with other databound controls like the GridView as well. It is useful anytime you want to program row elements on the client – and use clean/identified IDs to easily reference them from JavaScript code. Summary ASP.NET 4 enables you to generate much cleaner HTML markup from server controls and from within your Web Forms applications.  In today’s post I covered how you can now easily control the client ID values that are rendered by server controls.  In upcoming posts I’ll cover some of the other markup improvements that are also coming with the ASP.NET 4 release. Hope this helps, Scott

  Read the article

• Internationalize WebCenter Portal - Content Presenter

  - by Stefan Krantz

  Lately we have been involved in engagements where internationalization has been holding the project back from success. In this post we are going to explain how to get Content Presenter and its editorials to comply with the current selected locale for the WebCenter Portal session. As you probably know by now WebCenter Portal leverages the Localization support from Java Server Faces (JSF), in this post we will assume that the localization is controlled and enforced by switching the current browsers locale between English and Spanish. There is two main scenarios in internationalization of a content enabled pages, since Content Presenter offers both presentation of information as well as contribution of information, in this post we will look at how to enable seamless integration of correct localized version of the back end content file and how to enable the editor/author to edit the correct localized version of the file based on the current browser locale. Solution Scenario 1 - Localization aware content presentation Due to the amount of steps required to implement the enclosed solution proposal I have decided to share the solution with you in group components for each facet of the solution. If you want to get more details on each step, you can review the enclosed components. This post will guide you through the steps of enabling each component and what it enables/changes in each section of the system. Enable Content Presenter Customization By leveraging a predictable naming convention of the data files used to hold the content for the Content Presenter instance we can easily develop a component that will dynamically switch the name out before presenting the information. The naming convention we have leverage is the industry best practice by having a shared identifier as prefix (ContentABC) and a language enabled suffix (_EN) (_ES). So the assumption is that each file pair in above example should look like following:- English version - (ContentABC_EN)- Spanish version - (ContentABC_ES) Based on above theory we can now easily regardless of the primary version assigned to the content presenter instance switch the language out by using the localization support from JSF. Below java bean (oracle.webcenter.doclib.internal.view.presenter.NLSHelperBean) is enclosed in the customization project available for download at the bottom of the post: 1: public static final String CP_D_DOCNAME_FORMAT = "%s_%s"; 2: public static final int CP_UNIQUE_ID_INDEX = 0; 3: private ContentPresenter presenter = null; 4:   5:   6: public NLSHelperBean() { 7: super(); 8: } 9:   10: /** 11: * This method updates the configuration for the pageFlowScope to have the correct datafile 12: * for the current Locale 13: */ 14: public void initLocaleForDataFile() { 15: String dataFile = null; 16: // Checking that state of presenter is present, also make sure the item is eligible for localization by locating the "_" in the name 17: if(presenter.getConfiguration().getDatasource() != null && 18: presenter.getConfiguration().getDatasource().isNodeDatasource() && 19: presenter.getConfiguration().getDatasource().getNodeIdDatasource() != null && 20: !presenter.getConfiguration().getDatasource().getNodeIdDatasource().equals("") && 21: presenter.getConfiguration().getDatasource().getNodeIdDatasource().indexOf("_") > 0) { 22: dataFile = presenter.getConfiguration().getDatasource().getNodeIdDatasource(); 23: FacesContext fc = FacesContext.getCurrentInstance(); 24: //Leveraging the current faces contenxt to get current localization language 25: String currentLocale = fc.getViewRoot().getLocale().getLanguage().toUpperCase(); 26: String newDataFile = dataFile; 27: String [] uniqueIdArr = dataFile.split("_"); 28: if(uniqueIdArr.length > 0) { 29: newDataFile = String.format(CP_D_DOCNAME_FORMAT, uniqueIdArr[CP_UNIQUE_ID_INDEX], currentLocale); 30: } 31: //Replacing the current Node datasource with localized datafile. 32: presenter.getConfiguration().getDatasource().setNodeIdDatasource(newDataFile); 33: } 34: } With this bean code available to our WebCenter Portal implementation we can start the next step, by overriding the standard behavior in content presenter by applying a MDS Taskflow customization to the content presenter taskflow, following taskflow customization has been applied to the customization project attached to this post:- Library: WebCenter Document Library Service View- Path: oracle.webcenter.doclib.view.jsf.taskflows.presenter- File: contentPresenter.xml Changes made in above customization view:1. A new method invocation activity has been added (initLocaleForDataFile)2. The method invocation invokes the new NLSHelperBean3. The default activity is moved to the new Method invocation (initLocaleForDataFile)4. The outcome from the method invocation goes to determine-navigation (original default activity) The above changes concludes the presentation modification to support a compatible localization scenario for a content driven page. In addition this customization do not limit or disables the out of the box capabilities of WebCenter Portal. Steps to enable above customization Start JDeveloper and open your WebCenter Portal Application Select "Open Project" and include the extracted project you downloaded (CPNLSCustomizations.zip) Make sure the build out put from CPNLSCustomizations project is a dependency to your Portal project Deploy your Portal Application to your WC_CustomPortal managed server Make sure your naming convention of the two data files follow above recommendation Example result of the solution: Solution Scenario 2 - Localization aware content creation and authoring As you could see from Solution Scenario 1 we require the naming convention to be strictly followed, this means in the hands of a user with limited technology knowledge this can be one of the failing links in this solutions. Therefore I strongly recommend that you also follow this part since this will eliminate this risk and also increase the editors/authors usability with a magnitude. The current WebCenter Portal Architecture leverages WebCenter Content today to maintain, publish and manage content, therefore we need to make few efforts in making sure this part of the architecture is on board with our new naming practice and also simplifies the creation of content for our end users. As you probably remember the naming convention required a prefix to be common so I propose we enable a new component that help you auto name the content items dDocName (this means that the readable title can still be in a human readable format). The new component (WCP-LocalizationSupport.zip) built for this scenario will enable a couple of things: 1. A new service where a sequential number can be generate on request - service name: GET_WCP_LOCALE_CONTENTID 2. The content presenter is leveraging a specific function when launching the content creation wizard from within Content Presenter. Assumption is that users will create the content by clicking "Create Web Content" button. When clicking the button the wizard opened is actually running in side of WebCenter Content server, file executed (contentwizard.hcsp). This file uses JSON commands that will generate operations in the content server, I have extend this file to create two identical data files instead of one.- First it creates the English version by leveraging the new Service and a Global Rule to set the dDocName on the original check in screen, this global rule is available in a configuration package attached to this blog (NLSContentProfileRule.zip)- Secondly we run a set of JSON javascripts to create the Spanish version with the same details except for the name where we replace the suffix with (_ES)- Then content creation wizard ends with its out of the box behavior and assigns the Content Presenter instance the English versionSee Javascript markup below - this can be changed in the (WCP-LocalizationSupport.zip/component/WCP-LocalizationSupport/publish/webcenter) 1: //---------------------------------------A-TEAM--------------------------------------- 2: WCM.ContentWizard.CheckinContentPage.OnCheckinComplete = function(returnParams) 3: { 4: var callback = WCM.ContentWizard.CheckinContentPage.checkinCompleteCallback; 5: WCM.ContentWizard.ChooseContentPage.OnSelectionComplete(returnParams, callback); 6: // Load latest DOC_INFO_SIMPLE 7: var cgiPath = DOCLIB.config.httpCgiPath; 8: var jsonBinder = new WCM.Idc.JSONBinder(); 9: jsonBinder.SetLocalDataValue('IdcService', 'DOC_INFO_SIMPLE'); 10: jsonBinder.SetLocalDataValue('dID', returnParams.dID); 11: jsonBinder.Send(cgiPath, $CB(this, function(http) { 12: var ret = http.GetResponseText(); 13: var binder = new WCM.Idc.JSONBinder(ret); 14: var dDocName = binder.GetResultSetValue('DOC_INFO', 'dDocName', 0); 15: if(dDocName.indexOf("_") > 0){ 16: var ssBinder = new WCM.Idc.JSONBinder(); 17: ssBinder.SetLocalDataValue('IdcService', 'SS_CHECKIN_NEW'); 18: //Additional Localization dDocName generated 19: ssBinder.SetLocalDataValue('dDocName', getLocalizedDocName(dDocName, "es")); 20: ssBinder.SetLocalDataValue('primaryFile', 'default.xml'); 21: ssBinder.SetLocalDataValue('ssDefaultDocumentToken', 'SSContributorDataFile'); 22:   23: for(var n = 0 ; n < binder.GetResultSetFields('DOC_INFO').length ; n++) { 24: var field = binder.GetResultSetFields('DOC_INFO')[n]; 25: if(field != 'dID' && 26: field != 'dDocName' && 27: field != 'dID' && 28: field != 'dReleaseState' && 29: field != 'dRevClassID' && 30: field != 'dRevisionID' && 31: field != 'dRevLabel') { 32: ssBinder.SetLocalDataValue(field, binder.GetResultSetValue('DOC_INFO', field, 0)); 33: } 34: } 35: ssBinder.Send(cgiPath, $CB(this, function(http) {})); 36: } 37: })); 38: } 39:   40: //Support function to create localized dDocNames 41: function getLocalizedDocName(dDocName, lang) { 42: var result = dDocName.replace("_EN", ("_" + lang)); 43: return result; 44: } 45: //---------------------------------------A-TEAM--------------------------------------- 3. By applying the enclosed NLSContentProfileRule.zip, the check in screen for DataFile creation will have auto naming enabled with localization suffix (default is English)You can change the default language by updating the GlobalNlsRule and assign preferred prefix.See Rule markup for dDocName field below: <$executeService("GET_WCP_LOCALE_CONTENTID")$><$dprDefaultValue=WCP_LOCALE.LocaleContentId & "_EN"$> Steps to enable above extensions and configurations Install WebCenter Component (WCP-LocalizationSupport.zip), via the AdminServer in WebCenter Content Administration menus Enable the component and restart the content server Apply the configuration bundle to enable the new Global Rule (GlobalNlsRule), via the WebCenter Content Administration/Config Migration Admin New Content Creation Experience Result Content EditingContent editing will by default be enabled for authoring in the current select locale since the content file is selected by (Solution Scenario 1), this means that a user can switch his browser locale and then get the editing experience adaptable to the current selected locale. NotesA-Team are planning to post a solution on how to inline switch the locale of the WebCenter Portal Session, so the Content Presenter, Navigation Model and other Face related features are localized accordingly. Content Presenter examples used in this post is an extension to following post:https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enable_content_editing_of_iterative Downloads CPNLSCustomizations.zip - WebCenter Portal, Content Presenter Customization https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/CPNLSCustomizations.zip WCP-LocalizationSupport.zip - WebCenter Content, Extension Component to enable localization creation of files with compliant auto naminghttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/WCP-LocalizationSupport.zip NLSContentProfileRule.zip - WebCenter Content, Configuration Update Bundle to enable Global rule for new check in naming of data fileshttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/NLSContentProfileRule.zip

  Read the article

• Letter to Ballmer: Making Better Consumer Devices

  - by andrewbrust

  Last year, I wrote Steve Ballmer an email, and he was kind enough to write me back.  The email contained a scan of a column I wrote praising Microsoft’s BI strategy.  His reply contained three simple words: “Super nice  thanks.” Well, now I’d like to write to Steve again, in an open letter format, and this time the love may be a bit tougher.  But I’m still super earnest. The past two days have been eventful ones for Microsoft: The company announced the departure of company veterans Robbie Bach and J Allard and the market announced Apple is now besting Microsoft in market capitalization. Plus, announcements were made that make it plain that Ballmer will, in effect, be running Microsoft’s Entertainment & Devices division himself. With that in mind, I’d like to offer my list of a dozen things I think Microsoft’s CEO should do to improve that division’s offerings and, hopefully, its bottom line. So here goes:   1. On Windows Phone 7, Stay the Course The press is teeming with headlines and reader comments proclaiming the death-before-arrival of Windows Phone 7.  That’s plain silly.  You’ve got the makings of a great and unique SmartPhone platform, and you’re the only company (even considering RIM) that can offer full fidelity Exchange integration, not to mention implementing Office on the device.  Let the existing team finish this puppy and ship it. And then have them pump out a few updates, over-the-air, quickly.  Show them that Google Android’s not the only product that can do good, rapid dot releases. And another thing: make sure your OEMs’ devices have flawless touch screens.  If they don’t, then you shouldn’t certify them for delivery to customers.  Period. Oh, and kill the Kin, quietly.  It was DOA, and you know it.   2. Move Media Center to the Xbox Platform Media Center is, at its core, a good product.  But delivering a media distribution and DVR platform on a sophisticated PC operating system like Windows 7 just creates too many moving parts.  Xbox already functions as the best Media Center extender device – it should actually be the hub as well. Media Center is mostly based on .NET code – and XNA is a .NET environment for Xbox – find a way to bridge that small gap and make Media Center a joy to work with instead of a frustration.  Beating Apple TV out of this sub-market is the lowest hanging fruit on the tree (goofy pun, but it’s true).   3. Integrate Media Center with Mediaroom, or Kill the Latter You have two media products with almost identical names.  One is for standalone DVRs and the other is for IPTV cable set tops with DVR capabilities.  Can we merge these please?  My previous request of putting Media Center on Xbox would seem to tie into this nicely, since you’ve announced plans to do that with Mediaroom already.   4. Fix the Red Ring of Death People love the Xbox, but they really don’t love sending their consoles back every 18-24 months, when they get a bunch of red lights flashing on power up.  You’ve handled this defect about as gracefully as possible, but it’s been around for a long time now and it doesn’t seem to be fixed yet.  You can do better.  In fact, you must do better, or you insult your customers.   5. Add Blu Ray to Xbox I know, streaming movies are the future; physical media is legacy technology.  So if that’s true, why did you back HD DVD so hard?  You know why: for now, the film studios won’t allow a large selection of new release, HD, surround sound content be distributed on any medium other than Blu Ray or cable pay per view/on-demand.  Don’t you want home theater buffs to see the Xbox as a fantastic device for their rigs?  Don’t you want to put PlayStation 3 out of its misery?  And if you follow my suggestions above (move Media Center to the Xbox and fix the Red Ring problem), you’d have it all sewn up.  Do I think Blu Ray functionality will move a lot of units?  No.  Do I think that it would move more units with desperately needed influential home theater consumers?  You bet.  And you might sell more ZunePass subscriptions in the process. But while you’re at it, make the fan quieter, please.   6. Make More of Windows Home Server Home Server is a fantastic product.  And for reasons unknown to me, it seems like you’re letting it languish.  Development of the add-in ecosystem seems underfunded.  WHS’ unparalleled ease of use and reliability for home PC backup (and emergency restores) goes unsung.  Product cycles are slow.  Support for your OEMs, who are doing great work, especially in the green space with Atom CPUs, seems lacking.  You’ve married a trophy girl and you keep her cloistered at home!  That’s cruel, unusual and, um, incredibly ill-advised.  Make use of this ace card, and while you’re at it, give it real integration with Media Center.  The integration thus far proof-of-concept quality.  You should go way past that – both products will benefit immeasurably.   7. Set Up a Partner Platform for Custom Installers There’s a whole sub-industry of companies that install, integrate and configure home theater, security and connected home products.  They have an industry group. They are influential in the high-end of the consumer electronics industry, and so are their customers.  They love Media Center and they love Windows Home Server.  But I have talked to several of them at the Consumer Electronics Show and they tell me you don’t love them.  They find it very difficult to do business with Microsoft, even though they want nothing more than to sell and evangelize your platform.  This is a travesty.  Please fix it.  Get Allison Watson and the Microsoft Partner Network on board and have her hire someone who knows how to run a channel program for consumer electronics companies.  Problem solved.  Markets expanded.   8. Make Your Own Hardware In other areas, I know you love your partners.  I help run one, so I appreciate that.  But when it came to Xbox and Zune you built them it yourself (albeit on a contract basis, which is fine).  Windows Phone 7 has a chance to work as an OEM play, but it would work better if you produced the devices.  At least consider building a reference device that sells alongside your OEMs’ offerings.  That’s what Google did with the Nexxus One.  And while that phone was not itself a big seller, it catalyzed two wonderful things : (1) a quality bar was set and (2) partners exceeded it.  Before the Nexxus One, the best Android handset out there was the Motorola Droid. The Nexxus One was better, and the HTC Droid Incredible and Evo 4G are now even better than Google’s phone, which is why Verizon and Sprint decided not to carry it.  Imagine if all Windows Phone 6.x devices were on par with the HTC HD2.  I tend to believe you’d have a lot bigger market share than you do now.   9. Continue with Your Retail Initiative From what I hear, it sounds like it’s going well.  And this goes right along with making your own hardware.  When you build it, they will come.  And then it makes the likes of Best Buy and Staples do better.   10. Make an Acquisition (or Two) TiVo and/or Moxi look ripe for the picking.  With their ability to build stuff people love and your ability to run a business, you might just have something.  But do a better job than you did when you bought Danger.  Buy the ideas, not just the customers, eh?   11. Make Beautiful Stuff You’ve heard this one before, I know.  But I have some head-shrinking advice on this one.  You know that Apple obsesses over its industrial design.  You know that appeals to consumers.  But it seems you think doing so is Apple’s game exclusively and so you shouldn’t even try.  Bull dinky.  Come to New York and visit the Museum of Modern Art’s Architecture and Design gallery.  You’ll see that lots of companies and product categories have had very high design value well before Apple existed.  You can do this, and the Zune HD was a great start.  Now run with that.  Find those negative voices in your head that are telling you that you can’t and shut them up.  For good.   12. Burst the Bubble Some of the products you’ve built seem like they were conceived in a bizarro world.  That would appear to be the result of groupthink.  You must do better.  And there’s lots of people willing to advise you.  This includes just about everyone in the Regional Director program, and probably a bunch of MVPs.  Heck, I bet the guys at Engadget could help out too.  Imagine if you let them see the Kin before it shipped.  Talk to high-end gear consumers.  Talk to Best Buy and CostCo customers too.   Signing Off I hope this was of value to you.  As I wrote this I kept telling myself how obvious, even trite, some of these pieces of advice were and then, because of that, doubting they’d really help.  But I decided that they must not be obvious to Microsoft.  Sometimes when you get wrapped up in stuff, it’s hard to clear your head.  I think my head’s pretty clear here though (I’m wrapped up in other stuff), so maybe my perspective can help.  If not, well, then, I guess they all can’t be super nice.

  Read the article

• ASP.NET MVC Postbacks and HtmlHelper Controls ignoring Model Changes

  - by Rick Strahl

  So here's a binding behavior in ASP.NET MVC that I didn't really get until today: HtmlHelpers controls (like .TextBoxFor() etc.) don't bind to model values on Postback, but rather get their value directly out of the POST buffer from ModelState. Effectively it looks like you can't change the display value of a control via model value updates on a Postback operation. To demonstrate here's an example. I have a small section in a document where I display an editable email address: This is what the form displays on a GET operation and as expected I get the email value displayed in both the textbox and plain value display below, which reflects the value in the mode. I added a plain text value to demonstrate the model value compared to what's rendered in the textbox. The relevant markup is the email address which needs to be manipulated via the model in the Controller code. Here's the Razor markup: <div class="fieldcontainer"> <label> Email: &nbsp; <small>(username and <a href="http://gravatar.com">Gravatar</a> image)</small> </label> <div> @Html.TextBoxFor( mod=> mod.User.Email, new {type="email",@class="inputfield"}) @Model.User.Email </div> </div>   So, I have this form and the user can change their email address. On postback the Post controller code then asks the business layer whether the change is allowed. If it's not I want to reset the email address back to the old value which exists in the database and was previously store. The obvious thing to do would be to modify the model. Here's the Controller logic block that deals with that:// did user change email? if (!string.IsNullOrEmpty(oldEmail) && user.Email != oldEmail) { if (userBus.DoesEmailExist(user.Email)) { userBus.ValidationErrors.Add("New email address exists already. Please…"); user.Email = oldEmail; } else // allow email change but require verification by forcing a login user.IsVerified = false; }… model.user = user; return View(model); The logic is straight forward - if the new email address is not valid because it already exists I don't want to display the new email address the user entered, but rather the old one. To do this I change the value on the model which effectively does this:model.user.Email = oldEmail; return View(model); So when I press the Save button after entering in my new email address ([email protected]) here's what comes back in the rendered view: Notice that the textbox value and the raw displayed model value are different. The TextBox displays the POST value, the raw value displays the actual model value which are different. This means that MVC renders the textbox value from the POST data rather than from the view data when an Http POST is active. Now I don't know about you but this is not the behavior I expected - initially. This behavior effectively means that I cannot modify the contents of the textbox from the Controller code if using HtmlHelpers for binding. Updating the model for display purposes in a POST has in effect - no effect. (Apr. 25, 2012 - edited the post heavily based on comments and more experimentation) What should the behavior be? After getting quite a few comments on this post I quickly realized that the behavior I described above is actually the behavior you'd want in 99% of the binding scenarios. You do want to get the POST values back into your input controls at all times, so that the data displayed on a form for the user matches what they typed. So if an error occurs, the error doesn't mysteriously disappear getting replaced either with a default value or some value that you changed on the model on your own. Makes sense. Still it is a little non-obvious because the way you create the UI elements with MVC, it certainly looks like your are binding to the model value:@Html.TextBoxFor( mod=> mod.User.Email, new {type="email",@class="inputfield",required="required" }) and so unless one understands a little bit about how the model binder works this is easy to trip up. At least it was for me. Even though I'm telling the control which model value to bind to, that model value is only used initially on GET operations. After that ModelState/POST values provide the display value. Workarounds The default behavior should be fine for 99% of binding scenarios. But if you do need fix up values based on your model rather than the default POST values, there are a number of ways that you can work around this. Initially when I ran into this, I couldn't figure out how to set the value using code and so the simplest solution to me was simply to not use the MVC Html Helper for the specific control and explicitly bind the model via HTML markup and @Razor expression: <input type="text" name="User.Email" id="User_Email" value="@Model.User.Email" /> And this produces the right result. This is easy enough to create, but feels a little out of place when using the @Html helpers for everything else. As you can see by the difference in the name and id values, you also are forced to remember the naming conventions that MVC imposes in order for ModelBinding to work properly which is a pain to remember and set manually (name is the same as the property with . syntax, id replaces dots with underlines). Use the ModelState Some of my original confusion came because I didn't understand how the model binder works. The model binder basically maintains ModelState on a postback, which holds a value and binding errors for each of the Post back value submitted on the page that can be mapped to the model. In other words there's one ModelState entry for each bound property of the model. Each ModelState entry contains a value property that holds AttemptedValue and RawValue properties. The AttemptedValue is essentially the POST value retrieved from the form. The RawValue is the value that the model holds. When MVC binds controls like @Html.TextBoxFor() or @Html.TextBox(), it always binds values on a GET operation. On a POST operation however, it'll always used the AttemptedValue to display the control. MVC binds using the ModelState on a POST operation, not the model's value. So, if you want the behavior that I was expecting originally you can actually get it by clearing the ModelState in the controller code:ModelState.Clear(); This clears out all the captured ModelState values, and effectively binds to the model. Note this will produce very similar results - in fact if there are no binding errors you see exactly the same behavior as if binding from ModelState, because the model has been updated from the ModelState already and binding to the updated values most likely produces the same values you would get with POST back values. The big difference though is that any values that couldn't bind - like say putting a string into a numeric field - will now not display back the value the user typed, but the default field value or whatever you changed the model value to. This is the behavior I was actually expecting previously. But - clearing out all values might be a bit heavy handed. You might want to fix up one or two values in a model but rarely would you want the entire model to update from the model. So, you can also clear out individual values on an as needed basis:if (userBus.DoesEmailExist(user.Email)) { userBus.ValidationErrors.Add("New email address exists already. Please…"); user.Email = oldEmail; ModelState.Remove("User.Email"); } This allows you to remove a single value from the ModelState and effectively allows you to replace that value for display from the model. Why? While researching this I came across a post from Microsoft's Brad Wilson who describes the default binding behavior best in a forum post: The reason we use the posted value for editors rather than the model value is that the model may not be able to contain the value that the user typed. Imagine in your "int" editor the user had typed "dog". You want to display an error message which says "dog is not valid", and leave "dog" in the editor field. However, your model is an int: there's no way it can store "dog". So we keep the old value. If you don't want the old values in the editor, clear out the Model State. That's where the old value is stored and pulled from the HTML helpers. There you have it. It's not the most intuitive behavior, but in hindsight this behavior does make some sense even if at first glance it looks like you should be able to update values from the model. The solution of clearing ModelState works and is a reasonable one but you have to know about some of the innards of ModelState and how it actually works to figure that out.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Oracle Fusion Applications: Changing the Game

  - by kellsey.ruppel(at)oracle.com

  Originally posted in the Oracle Profit Magazine, November 2010 Edition. When the order processing system red-flags a customer's credit status, the IT department doesn't get the customer's call. When a supplier misses a delivery date for a key automotive assembly, it's not the CIO who has to answer for the error. Knowledge workers (known in IT circles as "users") are on the front lines when an exception occurs in an established business process. They're also the ones who study sales trends to decide when to open a new store in an up-and-coming neighborhood, which products are most profitable, how employee skill sets are evolving, and which suppliers are most efficient. In short, knowledge workers are masters of business as unusual. Traditional enterprise resource planning (ERP) systems and other familiar enterprise applications excel at automating, managing, and executing standard business processes. These programs shine when everything goes as planned. Life gets even trickier when a traditional application needs to be extended with a new service or an extra step is added to a business process when new products are brought to market, divisions are merged, or companies are acquired. Monolithic applications often need the IT department to step in and make the necessary adjustments--incurring additional costs and delays. Until now. When Oracle unveiled the much-anticipated family of Oracle Fusion Applications at Oracle OpenWorld in September 2010, knowledge workers in particular had a lot to cheer about. Business users will soon have ready access to analytical information and collaboration tools in the context of what they are working on, so they can make better decisions when problems or opportunities arise. Additionally, the Oracle Fusion Applications platform will make it easy for business users to tweak processes, create new capabilities, and find information, often without the need for IT department assistance and while still following company guidelines. And IT leaders will be happy to hear about new deployment options, guided implementation and setup tools, and cost-saving management capabilities. Just as important, the underlying technologies in Oracle Fusion Applications will allow organizations to choose among their existing investments and next-generation enterprise applications so they can introduce innovations at a pace that makes the most business and financial sense. "Oracle Fusion Applications are architected so you don't have to do rip and replace," says Jim Hayes, managing director of the consulting firm Accenture. "That's very important for creating a business case that will get through the steering committee and be approved by the board. It shows you can drive value and make a difference in the near term." For these and other reasons, analysts and early adopters are calling Oracle Fusion Applications a game changer for enterprise customers. The differences become apparent in three key areas: the way we innovate, work, and adopt technology. Game Changer #1: New Standard for InnovationChange is a constant challenge for most businesses, whether the catalysts are market dynamics, new competition, or the ever-expanding regulatory environment. And, in an ongoing effort to differentiate, business leaders are constantly looking for new ways to do business, serve constituents, and bring new products and services to market. In addition, companies face significant costs to keep their applications up-to-date. For example, when a company adds new suppliers to a procurement system, the IT shop typically has to invest time, effort, and even consulting fees for custom integrations that allow various ERP systems to communicate with each other. Oracle Fusion Applications were built on Web services and a modular SOA foundation to ease customizations and integration activities among all applications--whether from Oracle or another vendor. Interfaces and updates written in ubiquitous Java, rather than a proprietary coding language, allow organizations to tap into existing in-house technical skills rather than seek expensive outside specialists. And with SOA, organizations can extend a feature set or integrate with other SOA environments by combining Web services such as "look up customer" into a new business process managed by the BPEL orchestration engine. Flexibility like this has long-term implications. "Because users capture these changes at a higher metadata layer, not in the application's code, changes and additions are protected even as new versions of Oracle Fusion Applications are released," says Steve Miranda, senior vice president of applications development at Oracle. "This is a much more sustainable approach because you don't incur costly customizations that prevent upgrades and other innovations." And changes are easier to make: if one change is made in the metadata, that change is automatically reflected throughout the application interface, business intelligence, business process, and business logic. Game Changer #2: New Standard for WorkBoosting productivity comes down to doing the basics right: running business processes more efficiently and managing exceptions more effectively, so users can accomplish more in the course of a day or spend more quality time with the most profitable customers. The fastest way to improve process efficiency is to reduce the number of steps it takes to execute common tasks, such as ordering office equipment from an internal procurement system. Oracle Fusion Applications will deliver a complete role-based user experience with business intelligence and collaboration capabilities provided in the context of the work at hand. "We created every Oracle Fusion Applications screen by asking 'What does the user need to know?' 'What does he or she need to do?' and 'Who do they need to work with to get the job done?'" Miranda explains. So when the sales department heads need new laptops, the self-service procurement screen will not only display a list of approved vendors and configurations, but also a running list of reviews by coworkers who recently purchased the various models. Embedded intelligence may also display prevailing delivery lead times based on actual order histories, not the generic shipping dates vendors may quote. The pervasive business intelligence serves many other business activities across all areas of the enterprise. For example, a manager considering whether to promote a direct report can see the person's employee profile, with a salary history, appraisal summaries, and a rundown of skills and training. This approach to business intelligence also has implications for supply chain management. "One of the challenges at Ingersoll Rand is lack of visibility in our supply chain," says Mike Macrie, global director of enterprise applications for global industrial firm Ingersoll Rand. "Oracle Fusion Applications are going to provide the embedded intelligence to give us that visibility and give us the ability to analyze those orders at any point in our supply chain." Oracle Fusion Applications will also create a "role-based user experience" that displays a work list of events that need attention, based on user job function. Role awareness guides users with daily lists of action items and exceptions. So a credit manager may see seven invoices with discounts that are about to expire or 12 suppliers that have been put on hold because credit memos are awaiting approval. Individualization extends to the search capabilities of Oracle Fusion Applications. The platform uses Web-style search screens powered by an Oracle enterprise search engine, with a security framework that filters search results so individuals will only see the internal information they're authorized to access. A further aid to productivity is Oracle Fusion Applications' integration with Web 2.0 collaboration and social networking resources for business environments. Hover-over text will reveal relevant contact information whenever the name of a person appears in an Oracle Fusion Application. Users can connect via an online chat, phone call, or instant message without leaving the main application, reducing the time required for an accounts payable staffer to resolve a mismatch between an invoiced charge and the service record, for example. Addresses of suppliers, customers, or partners will also initiate hover-over text to show contact details and Web-based maps. Finally, Oracle Fusion Applications will promote a new way of working with purpose-driven communities that can bring new efficiencies to everything from cultivating sales leads to managing new projects. As soon as a lead or project materializes, the applications will automatically gather relevant participants into an online community that shares member contact information, schedules, discussion forums, and Wiki pages. "Oracle Fusion Applications will allow us to take it to the next level with embedded Web 2.0 tools and the embedded analytics," says Steve Printz, CIO and vice president, supply chain management, at window-and-door manufacturer Pella. "[This] allows those employees today who are processing transactions to really contribute to the success of the company and become decision-makers." Game Changer #3: New Standard for Technology AdoptionAs IT becomes a dominant component of how businesses run and compete, organizations need to lower the cost of implementing applications and introducing new application features. In the past, rolling out new code often required creating a test bed system, moving beta code to a separate system for user feedback, and--once all the revisions were made--moving version one of the software onto production systems, where business users could finally get the needed new features. Oracle Fusion Applications will use a dedicated setup manager application to streamline this process. First, the setup manager will help scope out the project, querying users about their requirements. "From those questions and answers we determine the steps and the order of those steps that will enable that task," Miranda says. Next, system utilities will assign tasks to owners, track completion status, and monitor the overall status of a programming effort. Oracle Fusion Applications can then recommend Web services that allow users to migrate setup choices and steps across all the various deployments of the application. Those setup capabilities automate the migration from test systems to production systems, as well as between different business units that may be using the same application. "The self-service ability of the setup manager helps business users change setups with very little intervention from the IT team," says Ravi Kumar, vice president at IT services company Infosys. "That to me is a big difference from how we've viewed enterprise applications before." For additional flexibility, organizations will be able to adopt Oracle Fusion Applications modules in either of two modes: a single-instance alternative uses one database for all Oracle Fusion Applications, while a "pillar mode" creates separate databases to underpin each application. This means IT departments running any one of Oracle's applications or even third-party applications can plug Oracle Fusion Applications modules into their environment and see additional business value created on top of their existing systems. And Oracle Fusion Applications offer a hybrid approach to deployment. The applications are all software-as-a-service-ready, so customers can choose on-premises, public or private cloud, or a combination of these to suit their business needs. It's that combination of flexibility and a roadmap for the future that may be the biggest game changer of all. "The Oracle Fusion Applications architecture allows us to migrate our company at a pace that's consistent with our business strategy, whereas before we might have had to do it with a massive upgrade," says Macrie of Ingersoll Rand. "We're looking forward to that architecture to really give us more flexibility in how we migrate over time." For More InformationUser Input Key to the Success of Oracle Fusion ApplicationsTransforming Coexistence into Strategic ValueUnder the HoodOracle Fusion ApplicationsOracle Service-Oriented Architecture  

  Read the article

• Creating HTML5 Offline Web Applications with ASP.NET

  - by Stephen Walther

  The goal of this blog entry is to describe how you can create HTML5 Offline Web Applications when building ASP.NET web applications. I describe the method that I used to create an offline Web application when building the JavaScript Reference application. You can read about the HTML5 Offline Web Application standard by visiting the following links: Offline Web Applications Firefox Offline Web Applications Safari Offline Web Applications Currently, the HTML5 Offline Web Applications feature works with all modern browsers with one important exception. You can use Offline Web Applications with Firefox, Chrome, and Safari (including iPhone Safari). Unfortunately, however, Internet Explorer does not support Offline Web Applications (not even IE 9). Why Build an HTML5 Offline Web Application? The official reason to build an Offline Web Application is so that you do not need to be connected to the Internet to use it. For example, you can use the JavaScript Reference Application when flying in an airplane, riding a subway, or hiding in a cave in Borneo. The JavaScript Reference Application works great on my iPhone even when I am completely disconnected from any network. The following screenshot shows the JavaScript Reference Application running on my iPhone when airplane mode is enabled (notice the little orange airplane):   Admittedly, it is becoming increasingly difficult to find locations where you can’t get Internet access. A second, and possibly better, reason to create Offline Web Applications is speed. An Offline Web Application must be downloaded only once. After it gets downloaded, all of the files required by your Web application (HTML, CSS, JavaScript, Image) are stored persistently on your computer. Think of Offline Web Applications as providing you with a super browser cache. Normally, when you cache files in a browser, the files are cached on a file-by-file basis. For each HTML, CSS, image, or JavaScript file, you specify how long the file should remain in the cache by setting cache headers. Unlike the normal browser caching mechanism, the HTML5 Offline Web Application cache is used to specify a caching policy for an entire set of files. You use a manifest file to list the files that you want to cache and these files are cached until the manifest is changed. Another advantage of using the HTML5 offline cache is that the HTML5 standard supports several JavaScript events and methods related to the offline cache. For example, you can be notified in your JavaScript code whenever the offline application has been updated. You can use JavaScript methods, such as the ApplicationCache.update() method, to update the cache programmatically. Creating the Manifest File The HTML5 Offline Cache uses a manifest file to determine the files that get cached. Here’s what the manifest file looks like for the JavaScript Reference application: CACHE MANIFEST # v30 Default.aspx # Standard Script Libraries Scripts/jquery-1.4.4.min.js Scripts/jquery-ui-1.8.7.custom.min.js Scripts/jquery.tmpl.min.js Scripts/json2.js # App Scripts App_Scripts/combine.js App_Scripts/combine.debug.js # Content (CSS & images) Content/default.css Content/logo.png Content/ui-lightness/jquery-ui-1.8.7.custom.css Content/ui-lightness/images/ui-bg_glass_65_ffffff_1x400.png Content/ui-lightness/images/ui-bg_glass_100_f6f6f6_1x400.png Content/ui-lightness/images/ui-bg_highlight-soft_100_eeeeee_1x100.png Content/ui-lightness/images/ui-icons_222222_256x240.png Content/ui-lightness/images/ui-bg_glass_100_fdf5ce_1x400.png Content/ui-lightness/images/ui-bg_diagonals-thick_20_666666_40x40.png Content/ui-lightness/images/ui-bg_gloss-wave_35_f6a828_500x100.png Content/ui-lightness/images/ui-icons_ffffff_256x240.png Content/ui-lightness/images/ui-icons_ef8c08_256x240.png Content/browsers/c8.png Content/browsers/es3.png Content/browsers/es5.png Content/browsers/ff3_6.png Content/browsers/ie8.png Content/browsers/ie9.png Content/browsers/sf5.png NETWORK: Services/EntryService.svc http://superexpert.com/resources/JavaScriptReference/ A Cache Manifest file always starts with the line of text Cache Manifest. In the manifest above, all of the CSS, image, and JavaScript files required by the JavaScript Reference application are listed. For example, the Default.aspx ASP.NET page, jQuery library, JQuery UI library, and several images are listed. Notice that you can add comments to a manifest by starting a line with the hash character (#). I use comments in the manifest above to group JavaScript and image files. Finally, notice that there is a NETWORK: section of the manifest. You list any file that you do not want to cache (any file that requires network access) in this section. In the manifest above, the NETWORK: section includes the URL for a WCF Service named EntryService.svc. This service is called to get the JavaScript entries displayed by the JavaScript Reference. There are two important things that you need to be aware of when using a manifest file. First, all relative URLs listed in a manifest are resolved relative to the manifest file. The URLs listed in the manifest above are all resolved relative to the root of the application because the manifest file is located in the application root. Second, whenever you make a change to the manifest file, browsers will download all of the files contained in the manifest (all of them). For example, if you add a new file to the manifest then any browser that supports the Offline Cache standard will detect the change in the manifest and download all of the files listed in the manifest automatically. If you make changes to files in the manifest (for example, modify a JavaScript file) then you need to make a change in the manifest file in order for the new version of the file to be downloaded. The standard way of updating a manifest file is to include a comment with a version number. The manifest above includes a # v30 comment. If you make a change to a file then you need to modify the comment to be # v31 in order for the new file to be downloaded. When Are Updated Files Downloaded? When you make changes to a manifest, the changes are not reflected the very next time you open the offline application in your web browser. Your web browser will download the updated files in the background. This can be very confusing when you are working with JavaScript files. If you make a change to a JavaScript file, and you have cached the application offline, then the changes to the JavaScript file won’t appear when you reload the application. The HTML5 standard includes new JavaScript events and methods that you can use to track changes and make changes to the Application Cache. You can use the ApplicationCache.update() method to initiate an update to the application cache and you can use the ApplicationCache.swapCache() method to switch to the latest version of a cached application. My heartfelt recommendation is that you do not enable your application for offline storage until after you finish writing your application code. Otherwise, debugging the application can become a very confusing experience. Offline Web Applications versus Local Storage Be careful to not confuse the HTML5 Offline Web Application feature and HTML5 Local Storage (aka DOM storage) feature. The JavaScript Reference Application uses both features. HTML5 Local Storage enables you to store key/value pairs persistently. Think of Local Storage as a super cookie. I describe how the JavaScript Reference Application uses Local Storage to store the database of JavaScript entries in a separate blog entry. Offline Web Applications enable you to store static files persistently. Think of Offline Web Applications as a super cache. Creating a Manifest File in an ASP.NET Application A manifest file must be served with the MIME type text/cache-manifest. In order to serve the JavaScript Reference manifest with the proper MIME type, I added two files to the JavaScript Reference Application project: Manifest.txt – This text file contains the actual manifest file. Manifest.ashx – This generic handler sends the Manifest.txt file with the MIME type text/cache-manifest. Here’s the code for the generic handler: using System.Web; namespace JavaScriptReference { public class Manifest : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/cache-manifest"; context.Response.WriteFile(context.Server.MapPath("Manifest.txt")); } public bool IsReusable { get { return false; } } } } The Default.aspx file contains a reference to the manifest. The opening HTML tag in the Default.aspx file looks like this: <html manifest="Manifest.ashx"> Notice that the HTML tag contains a manifest attribute that points to the Manifest.ashx generic handler. Internet Explorer simply ignores this attribute. Every other modern browser will download the manifest when the Default.aspx page is requested. Seeing the Offline Web Application in Action The experience of using an HTML5 Web Application is different with different browsers. When you first open the JavaScript Reference application with Firefox, you get the following warning: Notice that you are provided with the choice of whether you want to use the application offline or not. Browsers other than Firefox, such as Chrome and Safari, do not provide you with this choice. Chrome and Safari will create an offline cache automatically. If you click the Allow button then Firefox will download all of the files listed in the manifest. You can view the files contained in the Firefox offline application cache by typing about:cache in the Firefox address bar: You can view the actual items being cached by clicking the List Cache Entries link: The Offline Web Application experience is different in the case of Google Chrome. You can view the entries in the offline cache by opening the Developer Tools (hit Shift+CTRL+I), selecting the Storage tab, and selecting Application Cache: Notice that you view the status of the Application Cache. In the screen shot above, the status is UNCACHED which means that the files listed in the manifest have not been downloaded and cached yet. The different possible values for the status are included in the HTML5 Offline Web Application standard: UNCACHED – The Application Cache has not been initialized. IDLE – The Application Cache is not currently being updated. CHECKING – The Application Cache is being fetched and checked for updates. DOWNLOADING – The files in the Application Cache are being updated. UPDATEREADY – There is a new version of the Application. OBSOLETE – The contents of the Application Cache are obsolete. Summary In this blog entry, I provided a description of how you can use the HTML5 Offline Web Application feature in the context of an ASP.NET application. I described how this feature is used with the JavaScript Reference Application to store the entire application on a user’s computer. By taking advantage of this new feature of the HTML5 standard, you can improve the performance of your ASP.NET web applications by requiring users of your web application to download your application once and only once. Furthermore, you can enable users to take advantage of your applications anywhere -- regardless of whether or not they are connected to the Internet.

  Read the article

• E-Business Suite Technology Sessions at OAUG Collaborate 12

  - by Max Arderius

  Members of our E-Business Suite Applications Technology Group will be at the OAUG Collaborate 12 conference at the Mandalay Bay Convention Center in Las Vegas, Nevada on April 22 to 26, 2012.  Please drop by any of our sessions to hear the latest news and meet up with us. Speaker Sessions Session 9675Planning Your Oracle E-Business Suite Upgrade from Release 11i to 12.1 and BeyondAnne Carlson, Senior Director, Applications Technology Group, OracleSunday, April 22, 2:00 pm - 3:00 pmLocation: Jasmine B Attend this session to hear the latest Oracle E-Business Suite Release 12.1 upgrade planning tips gleaned from customers who have already performed the upgrade. Youll get specific, cross-product advice on how to decide your project's scope, understand the factors that affect your project's duration, develop a robust testing strategy, leverage Oracle Support resources, and more. In a nutshell, this session tells you things you need to know before embarking upon your Release 12.1 upgrade project. Session 9401Minimizing Oracle E-Business Suite Maintenance DowntimesElke Phelps, Principal Product Manager, Applications Technology Group, OracleKevin Hudson, Sr. Director, Applications Technology Group, OracleSunday, April 22, 2:10 pm - 3:10 pmLocation: South Seas EThis session starts with an architecture review of Oracle E-Business Suite fundamentals and then moves to a practical view of the different tools and approaches for downtimes. Topics include patching shortcuts, merging patches, distributing worker processes across multiple servers, running ADPatch in no-interactive mode, staged APPL_TOPs, shared file systems, deferring system-wide database tasks, avoiding resource bottlenecks etc... This session also describes the online patching capabilities coming in Release 12.2. Session 9368Oracle E-Business Suite Technology: Latest Features and RoadmapLisa Parekh, Vice President, Applications Technology Group, Oracle Sunday, April 22, 4:30 pm - 5:30 pmLocation: South Seas EThis session provides an overview of Oracle E-Business Suite technology strategy, the capabilities and associated business benefits of recent releases, as well as a review of the product roadmap. As a cornerstone session for Oracle E-Business Suite technology, come hear about the latest usability enhancements, systems administration and configuration management tools, security-related updates, and tools and options for extending, customizing, and integrating the Oracle E-Business Suite with other applications. Session 10709Oracle E-Business Suite Applications Strategy and General Manager UpdateCliff Godwin, Sr. VP, Application Development, OracleMonday, April 23, 2:30 pm - 3:30 pmLocation: Mandalay Bay DIn this session, hear from Oracle E-Business Suite General Manager Cliff Godwin as he delivers an update on the Oracle E-Business Suite product line. The session covers the value delivered by the current release of Oracle E-Business Suite applications, the momentum, and how Oracle E-Business Suite applications integrate into Oracle’s overall applications strategy. You will come away with an understanding of the value Oracle E-Business Suite applications deliver now and in the future. Session 9398How to Reduce TCO Using Oracle Application Management Suite for Oracle E-Business SuiteAngelo Rosado, Principal Product Manager, Applications Technology Group, OracleKenneth Baxter, Principal Product Strategy Manager, Management Pack Fusion Middleware Management, OracleTuesday, April 24, 8:00 am - 9:00 amLocation: Breakers GThis session covers the methods and tools you can use to gain insights into your end users, troubleshoot performance problems, define service-level objectives, and proactively monitor your end-to-end Oracle E-Business Suite environment to meet your availability and performance targets. Come hear how you can manage, diagnose, and monitor the Oracle E-Business Suite environment from a single console by using Oracle Enterprise Manager together with the Oracle Application Management Suite for Oracle E-Business Suite. Session 9370 Coexistence of Oracle E-Business Suite and Oracle Fusion Applications: Platform Perspective Nadia Bendjedou, Senior Director, Product Strategy, Oracle Tuesday, April 24, 2:00 pm - 3:00 pm Location: South Seas E Join us at this session if you are wondering which tools to integrate your data, your processes and your User Interface. Or what tools to customize and extend your screens and reports (OAF, Forms, ADF, Oracle Reports, BI etc....), what tools to secure, protect and manage your Oracle E-Business Suite etc... Or simply if you are looking for a technical roadmap for your Oracle E-Business Suite infrastructure to CO-EXIST with the rest of your enterprise applications including Oracle Fusion Applications. Session 9375 Oracle E-Business Suite Directions: Deployment and System AdministrationMax Arderius, Manager, Applications Development Group, OracleTuesday, April 24, 4:30 pm - 5:30 pmLocation: Breakers GWhat's coming in the next major version of Oracle E-Business Suite 12? This session covers the latest technology stack, including the use of Oracle WebLogic Server and Oracle Database 11g Release 2. Topics include an architectural overview, installation and upgrade options, new configuration options, and new tools for hot-cloning and automated "lights out" cloning. Learn about how online patching will reduce your database patching downtimes to the time it takes to bounce your database server.Session 9369Oracle E-Business Suite Technology Certification Primer and RoadmapSteven Chan, Sr. Director, Applications Technology Group, Oracle Wednesday, April 25, 8:15 am - 9:15 amLocation: South Seas FThis Oracle Development session summarizes the latest certifications and roadmap for the Oracle E-Business Suite technology stack, including database releases/options, Java, Oracle Forms, Oracle Containers for J2EE, desktop OS, browsers, JRE releases, Office/OpenOffice, development and Web authoring tools, user authentication and management, BI, security options, clouds, Oracle VM etc.... It also covers the most-commonly-asked questions about technology stack component support dates and upgrade implications. Session 9407The Latest Oracle E-Business Suite Release User Interface and Usability EnhancementsGustavo Jimenez, Sr. Manager, Applications Technology Group, Oracle Wednesday, April 25, 1:00 pm - 2:00 pmLocation: South Seas GIn this session, developers will get a detailed look at new features designed to enhance usability, offer more capabilities for personalization and extensions, and support the development and use of dashboards and Web services. Topics include rich new UI capabilities such as new home page features, Navigator and Favorites pull-down menus, Oracle ADF task flows etc.... In addition, we will cover the personalization/extensibility enhancements, business layer extensions, Oracle ADF integration and much more. Session 9374Best Practices for Oracle E-Business Suite Performance Tuning and Upgrade OptimizationIsam Alyousfi, Senior Director, Applications Performance, OracleUdayan Parvate, Director, Release Engineering, Quality and Release Management, Oracle Thursday, April 26, 8:30 am - 9:30 amLocation: South Seas FThis presentation will offer tips and techniques on tuning all the layers of the Oracle E-Business Suite stack including the various tiers of the Oracle E-Business Suite environment. You will learn about tuning Oracle Forms, Concurrent Manager, Apache, and Oracle Discoverer. Track down memory leaks and other issues on the Java and Java Virtual Machine layers. The session also covers Oracle E-Business Suite product-level tuning, including Oracle Workflow, Oracle Order Management, Oracle Payroll, and other modules.Session 9412 Oracle E-Business Suite 12.1 Desktop Integration: Beyond Oracle Applications Desktop IntegratorGustavo Jimenez, Sr. Manager, Applications Technology Group, OracleThursday, April 26, 8:30 am - 9:30 amLocation: Breakers GThis session describes the new expanded functionality in Oracle Web Applications Desktop Integrator, Oracle Report Manager, and dedicated integrators. You have more options for desktop integration now, not fewer. Topics include an overview of prepackaged solutions for integrating Oracle E-Business Suite with desktop applications such as Microsoft Excel, Word, and Projects. The session also discusses how you can use the Desktop Integration Framework feature to create your own integrators quickly and easily.Session 9533 Upgrading your Customizations to Oracle E-Business Suite Release 12.1Sara Woodhull, Principal Product Manager, Applications Technology Group, Oracle Thursday, April 26, 11:00 am - 12:00 pmLocation: South Seas FHave you personalized Forms or OA Framework screens? Have you used mod_plsql or Applications Express to tailor your Release 11i functionality? Have you extended or customized your Release 11i environment using other tools? This session will help you understand customization scenarios, use cases, tools, and technologies for ensuring that your Oracle E-Business Suite Release 12.1 environment fits your users' needs closely and that any future customizations will be easy to upgrade. Special Interest Groups (SIG) Session 10535OAUG Database SIG- Part IMichael Brown, Colibri Limited Company Sunday, April 22, 3:20 pm - 4:20 pmLocation: South Seas FThis is the annual meeting of the Database SIG at Collaborate. The call for candidates for the chair will be closed at the meeting. Plans include a speaker from Oracle and a presentation on applications performance. The details of the meeting will be posted on http://www.dbsig.com. Guest Presentation: Oracle E-Business Suite Database PerformanceIsam Alyousfi, Senior Director, Applications Performance, Oracle Session 10720OAUG EBS Applications Technology SIG- Part ISrini Chaval, Cummins Monday, April 23, 2:30 pm - 3:30 pmLocation: South Seas F Guest Presentation:Oracle E-Business Suite Technology Certification RoadmapSteven Chan, Sr. Director, Applications Technology Group, Oracle Session 10510OAUG EBS Applications Technology SIG- Part IISrini Chaval, CumminsMonday, April 23, 3:45 pm - 4:45 pmLocation: South Seas F Guest Presentation:Oracle E-Business Suite 12.2 Online Patching Kevin Hudson, Sr. Director, Applications Technology Group, Oracle Session 10522 OAUG Upgrade SIG- Part IISandra Vucinic, VLAD Group, Inc. Wednesday, April 25, 3:00 pm - 4:00 pmLocation: South Seas FUpgrade SIG will host a business meeting followed by panel (Q&A) related to EBS Upgrade topics and Oracle presentation. Guest Presentation:Upgrading E-Business Suite Amrita Mehrok, Director, Financials Product Strategy, Oracle Nadia Bendjedou, Senior Director, Product Strategy, Oracle Session 10722OAUG Upgrade SIG- Part IISandra Vucinic, VLAD Group, Inc. Wednesday, April 25, 4:15 pm - 5:15 pmLocation: South Seas FUpgrade SIG will host a business meeting followed by panel (Q&A) related to EBS Upgrade topics and Oracle presentation. Guest Presentation:Tuning the Oracle E-Business Suite Upgrade Isam Alyousfi, Senior Director, Applications Performance, Oracle Panels Session 9360Oracle E-Business Suite Cloning PanelSandra Vucinic, VLAD Group, Inc. Guest Speaker: Max Arderius, Manager, Applications Technology Group, OracleWednesday, April 25, 9:30 am - 10:30 amLocation: South Seas FThis panel will discuss differences between available release 11i, R12 and R12.1 cloning methods. Advantages and disadvantages of each cloning method will be discussed in depth. This panel of experienced database administrators will lead a discussion focusing on the questions such as “which cloning method is best to use in your particular environment”. Attendees will gain practical knowledge, tips and tricks to assist with cloning of Oracle E-Business Suite release 11i, R12 and R12.1 environments. Session 10022Oracle Applications Tuning PanelMark Farnham, Rightsizing, Inc.Guest Speaker: Isam Alyousfi, Senior Director, Applications Performance, OracleThursday, April 26, 09:45 am - 10:45 amLocation: South Seas FThis applications performance panel session, sponsored by the OAUG Database SIG, provides a Q&A forum focused on helping you address your Oracle Applications (Oracle E-Business Suite and Oracle's PeopleSoft Enterprise and Siebel applications) performance- and scalability-related issues. The panel comprises several well-known Oracle Applications performance experts. Topic areas include Oracle Database; the network; and the applications tier, including patching and upgrade performance. For complete listing of all speaker sessions and other activities, please visit the OAUG Collaborate Web Site.

  Read the article

• Add Free Windows Live Apps to Your Website or Blog

  - by Matthew Guay

  Would you like to use Hotmail, Office Web Apps, Messenger, and more on your website domain?  Here’s how you can add Windows Live to your website for free. Microsoft offers a popular suite of online communications products including Hotmail and Messenger.  Although Hotmail hasn’t been as popular in recent years as Gmail, it is getting a refresh this summer that might make it an even better email solution.  Additionally, the new Office Web Apps offer great compatibility with Office documents. While Skydrive offers 25Gb of free online file storage for all users, so Windows Live can make a great communications solution for your domain. Note: To signup for Windows Live for your domain, you will need to be able to add info to your WordPress.com blog or change Domain settings manually. Getting Started Open the Windows Live Custom Domains page (Link below) to get started adding Windows Live to your domain.  Your free Windows Live account will let you create up to 500 accounts, so it’s great for teams and groups that want to have customized email addresses in addition to those who just want an email account for their website. Enter your domain or subdomain you want to add to Windows Live in the box, and then select whether you want to setup Hotmail with this or now.  We want to add email to our domain, so select Set up Windows Live Hotmail for my domain and click Continue. You’ll need to sign in with a Windows Live ID to create the account, or choose to create a new Windows Live account associated with your domain.   Sign in with your Windows Live ID…this can be a Hotmail, Live Messenger, XBOX Live, Zune ID, or Microsoft.com account. Or, enter your information to create a new Windows Live ID if you selected the second option. Now, review your settings and make sure everything looks correct.  Click the I Accept button to setup your account.   Your account is now fully setup, but you’ll need to add or edit DNS information on your site.  The steps are slightly different depending if your site is hosted on WordPress.com, on your own server, or hosting service. We’ll show you how to do it on either one. First, though, note the information below this box.  You’ll see settings for your Mail setup…   Security settings…   And Messenger integration.  Make note of the settings, especially the circled ones, as we’ll need them in the next step. Integrate Windows Live with Your WordPress Blog If the domain you added to Windows Live is for your WordPress blog, login to your WordPress dashboard in a separate browser window or tab.  Click the arrow beside Upgrades, and select Domains from the menu. Click the Edit DNS link beside the domain name you’re adding to Windows Live. In the text box on this page, enter the following, replacing Your_info with your code from the Mail Setup box in your Windows Live Dashboard.  Note that this is the blurred section in our screenshots.  It should be a numerical code like 1234567890.pamx1.hotmail.com. MX 10 Your_info.pamx1.hotmail.com. TXT v=spf1 include:hotmail.com ~all CNAME Your_info domains.live.com. Click Save DNS records, and your settings are saved to WordPress.  Note that this will only integrate email with your WordPress account; you cannot integrate Messenger with a domain hosted on WordPress.com. Finally, return to your Windows Live Settings page and click Refresh.  If your settings are correct, you’ll now be ready to use Windows Live on your WordPress.com domain. Integrate Windows Live with Your Own Server If your website is hosted on your own server or hosting account, you’ll need to take a few more steps to add Windows Live to your domain.  This is fairly easy, but the steps may be different depending on your hosting company or registrar.  With some hosts, you may have to contact support to have them add the MX records for you.  Our site’s host uses the popular cPanel for website administration, so here’s how we added the MX Entries through cPanel. Login to your website’s cPanel, and select MX Entry under the Mail section. In the text box on this page, enter the following, replacing Your_info with your code from the Mail Setup box in your Windows Live Dashboard.  Note that this is the blurred section in our screenshots.  It should be a numerical code like 1234567890.pamx1.hotmail.com. MX 10 Your_info.pamx1.hotmail.com. Now, go back to your cPanel home, and select Advanced DNS Zone Editor under Domains. Here, add a TXT record with the following info: Name: yoursite.com. TTL: 3600 TXT Data: v=spf1 include:hotmail.com ~all Click Add Record and your Mail integration data is all configured. To integrate Messenger with your own domain, you’ll have to add an SRV entry to your DNS settings.  cPanel doesn’t have an option for this, so we had to contact our site’s hosting company and they added the entry for us.  Copy all of the information in the Messenger box and send it to your domain support, and they should be able to add this for you.  Alternately, if you don’t want or need Messenger, then you can simply skip this step. Once all of your settings are in place, return to your Windows Live Settings page and click Refresh.  If your settings are correct, you’ll now be ready to use Windows Live on your WordPress.com domain. Create a New Email Account On Your Domain Welcome to your new Windows Live admin page!  Now you can add email accounts so you and anyone else you want can access Hotmail and the other Windows Live apps with your domain.  Click Add to add an account. Enter an account name, which will be the email address of the account, e.g. [email protected].  Then enter the user’s name and a password for the account.  By default this will be a temporary password, and the user will have to change it on first log-in, but if you’re setting up this account for yourself, you can uncheck the box and keep this as your standard password. Now, go to www.mail.live.com, and sign in with your new email address and password.  Remember, your email address is your username previously entered followed by @yourdomain.com. To finish setting up the email account, enter your password, secret question and answer, alternate email, and location information.  Click I accept to finish setting up your new email account. Enter the characters in the Captcha to confirm you’re a human, and click Continue. Your new Hotmail inbox will now load, and you’ll have a welcome email in your inbox.  This works the same as normal Hotmail, except this time, your email address is with your own domain. You can now access any of the Windows Live services from the top-level menu. Here’s an Excel Spreadsheet open in the new Office Web Apps via SkyDrive on our new Windows Live account. If you setup Messenger access previously, you can now sign in to Windows Live Messenger using your new @yourdomain.com account as well. Important Links Accessing your Windows Live accounts is easy.  Simply go to any Windows Live site, such as www.hotmail.com or www.skydrive.com, and sign in with your new Windows Live ID from your domain as normal.  You don’t need a special address to access your account; it works just like the standard public Hotmail accounts. To administer your Windows Live for your domain, go to https://domains.live.com/ and sign in with the Windows Live ID you used to create the account.  Here you can add more users, change settings, and view usage details for the Windows Live accounts on your domain. Conclusion Windows Live is easy to add to your domain, and lets you create up to 500 email address for it.  With the upcoming updates to Hotmail and Office Web Apps coming this summer, this can be a nice way to make your domain even more useful.  And with 500 email accounts, you can easily let your team take advantage of your unique address as well. If you’d rather use Google’s online applications with your domain, check out our article on how to add free Google apps to your website or blog. Link Signup for Windows Live for Your Domain Similar Articles Productive Geek Tips Tools to Help Post Content On Your WordPress BlogBackup Your Windows Live Writer SettingsInstall Windows Live Essentials In Windows 7Add Your Gmail To Windows Live MailMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12

  Read the article

• Silverlight for Windows Embedded tutorial (step 6)

  - by Valter Minute

  In this tutorial step we will develop a very simple clock application that may be used as a screensaver on our devices and will allow us to discover a new feature of Silverlight for Windows Embedded (transforms) and how to use an “old” feature of Windows CE (timers) inside a Silverlight for Windows Embedded application. Let’s start with some XAML, as usual: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Width="640" Height="480" FontSize="18" x:Name="Clock">   <Canvas x:Name="LayoutRoot" Background="#FF000000"> <Grid Height="24" Width="150" Canvas.Left="320" Canvas.Top="234" x:Name="SecondsHand" Background="#FFFF0000"> <TextBlock Text="Seconds" TextWrapping="Wrap" Width="50" HorizontalAlignment="Right" VerticalAlignment="Center" x:Name="SecondsText" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> <Grid Height="24" x:Name="MinutesHand" Width="100" Background="#FF00FF00" Canvas.Left="320" Canvas.Top="234"> <TextBlock HorizontalAlignment="Right" x:Name="MinutesText" VerticalAlignment="Center" Width="50" Text="Minutes" TextWrapping="Wrap" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> <Grid Height="24" x:Name="HoursHand" Width="50" Background="#FF0000FF" Canvas.Left="320" Canvas.Top="234"> <TextBlock HorizontalAlignment="Right" x:Name="HoursText" VerticalAlignment="Center" Width="50" Text="Hours" TextWrapping="Wrap" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> </Canvas> </UserControl> This XAML file defines three grid panels, one for each hand of our clock (we are implementing an analog clock using one of the most advanced technologies of the digital world… how cool is that?). Inside each hand we put a TextBlock that will be used to display the current hour, minute, second inside the dial (you can’t do that on plain old analog clocks, but it looks nice). As usual we use XAML2CPP to generate the boring part of our code. We declare a class named “Clock” and derives from the TClock template that XAML2CPP has declared for us. class Clock : public TClock<Clock> { ... }; Our WinMain function is more or less the same we used in all the previous samples. It initializes the XAML runtime, create an instance of our class, initialize it and shows it as a dialog: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { if (!XamlRuntimeInitialize()) return -1;   HRESULT retcode;   IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return -1; Clock clock;   if (FAILED(clock.Init(hInstance,app))) return -1;     UINT exitcode;   if (FAILED(clock.GetVisualHost()->StartDialog(&exitcode))) return -1;   return exitcode; } Silverlight for Windows Embedded provides a lot of features to implement our UI, but it does not provide timers. How we can update our clock if we don’t have a timer feature? We just use plain old Windows timers, as we do in “regular” Windows CE applications! To use a timer in WinCE we should declare an id for it: #define IDT_CLOCKUPDATE 0x12341234 We also need an HWND that will be used to receive WM_TIMER messages. Our Silverlight for Windows Embedded page is “hosted” inside a GWES Window and we can retrieve its handle using the GetContainerHWND function of our VisualHost object. Let’s see how this is implemented inside our Clock class’ Init method: HRESULT Init(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode;   if (FAILED(retcode=TClock<Clock>::Init(hInstance,app))) return retcode;   // create the timer user to update the clock HWND clockhwnd;   if (FAILED(GetVisualHost()->GetContainerHWND(&clockhwnd))) return -1;   timer=SetTimer(clockhwnd,IDT_CLOCKUPDATE,1000,NULL); return 0; } We use SetTimer to create a new timer and GWES will send a WM_TIMER to our window every second, giving us a chance to update our clock. That sounds great… but how could we handle the WM_TIMER message if we didn’t implement a window procedure for our window? We have to move a step back and look how a visual host is created. This code is generated by XAML2CPP and is inside xaml2cppbase.h: virtual HRESULT CreateHost(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode; XRWindowCreateParams wp;   ZeroMemory(&wp, sizeof(XRWindowCreateParams)); InitWindowParms(&wp);   XRXamlSource xamlsrc;   SetXAMLSource(hInstance,&xamlsrc); if (FAILED(retcode=app->CreateHostFromXaml(&xamlsrc, &wp, &vhost))) return retcode;   if (FAILED(retcode=vhost->GetRootElement(&root))) return retcode; return S_OK; } As you can see the CreateHostFromXaml function of IXRApplication accepts a structure named XRWindowCreateParams that control how the “plain old” GWES Window is created by the runtime. This structure is initialized inside the InitWindowParm method: // Initializes Windows parameters, can be overridden in the user class to change its appearance virtual void InitWindowParms(XRWindowCreateParams* wp) { wp->Style = WS_OVERLAPPED; wp->pTitle = windowtitle; wp->Left = 0; wp->Top = 0; } This method set up the window style, title and position. But the XRWindowCreateParams contains also other fields and, since the function is declared as virtual, we could initialize them inside our version of InitWindowParms: // add hook procedure to the standard windows creation parms virtual void InitWindowParms(XRWindowCreateParams* wp) { TClock<Clock>::InitWindowParms(wp);   wp->pHookProc=StaticHostHookProc; wp->pvUserParam=this; } This method calls the base class implementation (useful to not having to re-write some code, did I told you that I’m quite lazy?) and then initializes the pHookProc and pvUserParam members of the XRWindowsCreateParams structure. Those members will allow us to install a “hook” procedure that will be called each time the GWES window “hosting” our Silverlight for Windows Embedded UI receives a message. We can declare a hook procedure inside our Clock class: // static hook procedure static BOOL CALLBACK StaticHostHookProc(VOID* pv,HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { ... } You should notice two things here. First that the function is declared as static. This is required because a non-static function has a “hidden” parameters, that is the “this” pointer of our object. Having an extra parameter is not allowed for the type defined for the pHookProc member of the XRWindowsCreateParams struct and so we should implement our hook procedure as static. But in a static procedure we will not have a this pointer. How could we access the data member of our class? Here’s the second thing to notice. We initialized also the pvUserParam of the XRWindowsCreateParams struct. We set it to our this pointer. This value will be passed as the first parameter of the hook procedure. In this way we can retrieve our this pointer and use it to call a non-static version of our hook procedure: // static hook procedure static BOOL CALLBACK StaticHostHookProc(VOID* pv,HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { return ((Clock*)pv)->HostHookProc(hwnd,Msg,wParam,lParam,pRetVal); } Inside our non-static hook procedure we will have access to our this pointer and we will be able to update our clock: // hook procedure (handles timers) BOOL HostHookProc(HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { switch (Msg) { case WM_TIMER: if (wParam==IDT_CLOCKUPDATE) UpdateClock(); *pRetVal=0; return TRUE; } return FALSE; } The UpdateClock member function will update the text inside our TextBlocks and rotate the hands to reflect current time: // udates Hands positions and labels HRESULT UpdateClock() { SYSTEMTIME time; HRESULT retcode;   GetLocalTime(&time);   //updates the text fields TCHAR timebuffer[32];   _itow(time.wSecond,timebuffer,10);   SecondsText->SetText(timebuffer);   _itow(time.wMinute,timebuffer,10);   MinutesText->SetText(timebuffer);   _itow(time.wHour,timebuffer,10);   HoursText->SetText(timebuffer);   if (FAILED(retcode=RotateHand(((float)time.wSecond)*6-90,SecondsHand))) return retcode;   if (FAILED(retcode=RotateHand(((float)time.wMinute)*6-90,MinutesHand))) return retcode;   if (FAILED(retcode=RotateHand(((float)(time.wHour%12))*30-90,HoursHand))) return retcode;   return S_OK; } The function retrieves current time, convert hours, minutes and seconds to strings and display those strings inside the three TextBlocks that we put inside our clock hands. Then it rotates the hands to position them at the right angle (angles are in degrees and we have to subtract 90 degrees because 0 degrees means horizontal on Silverlight for Windows Embedded and usually a clock 0 is in the top position of the dial. The code of the RotateHand function uses transforms to rotate our clock hands on the screen: // rotates a Hand HRESULT RotateHand(float angle,IXRFrameworkElement* Hand) { HRESULT retcode; IXRRotateTransformPtr rotatetransform; IXRApplicationPtr app;   if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode;   if (FAILED(retcode=app->CreateObject(IID_IXRRotateTransform,&rotatetransform))) return retcode;     if (FAILED(retcode=rotatetransform->SetAngle(angle))) return retcode;   if (FAILED(retcode=rotatetransform->SetCenterX(0.0))) return retcode;   float height;   if (FAILED(retcode==Hand->GetActualHeight(&height))) return retcode;   if (FAILED(retcode=rotatetransform->SetCenterY(height/2))) return retcode; if (FAILED(retcode=Hand->SetRenderTransform(rotatetransform))) return retcode;   return S_OK; } It creates a IXRotateTransform object, set its rotation angle and origin (the default origin is at the top-left corner of our Grid panel, we move it in the vertical center to keep the hand rotating around a single point in a more “clock like” way. Then we can apply the transform to our UI object using SetRenderTransform. Every UI element (derived from IXRFrameworkElement) can be rotated! And using different subclasses of IXRTransform also moved, scaled, skewed and distorted in many ways. You can also concatenate multiple transforms and apply them at once suing a IXRTransformGroup object. The XAML engine uses vector graphics and object will not look “pixelated” when they are rotated or scaled. As usual you can download the code here: http://cid-9b7b0aefe3514dc5.skydrive.live.com/self.aspx/.Public/Clock.zip If you read up to (down to?) this point you seem to be interested in Silverlight for Windows Embedded. If you want me to discuss some specific topic, please feel free to point it out in the comments! Technorati Tags: Silverlight for Windows Embedded,Windows CE

  Read the article

• CodePlex Daily Summary for Sunday, April 11, 2010

  CodePlex Daily Summary for Sunday, April 11, 2010New ProjectsArkzia: This Silverlight game.CodePlex Wiki Editor: CodePlex Wiki Editor makes it easier for CodePlex users to create their wiki documentations. This project offer a rich interface for the edition...Evaluate: Evaluate & Comet DWR like .NET library with powerfull Evaluate and Ajax Comet support. Also, you may use Evaluate library in your own .Net applicat...FamAccountor: 家庭记账薄Horadric: This is common tools freamwork!K8061.Managed: This is a solution to use the Velleman Extended K8061 USB Interface board with .net and to have a nice wrapper handling most of the overhead for us...Latent semantic analysis: all you need is to use!: Baggr is feed aggregator with web interface, user rating and LSA filter. Enjoy it!LIF7 ==> RISK : TOWER DEFENSE: Université Lyon 1, L2 MATH-INFO 2009-2010 Semestre de printemps Projet RISK : TOWER DEFENSE Membres : Jessica El Melhem, Vincent Sébille, et Jonat...Managed ESL Suite: Managed ESL Suite using C# for FreeSWITCH Omni-Tool - A program version concept of the tool used in Mass Effect.: A program version concept of the tool used in Mass Effect. It will support little apps (plugins) that run inside the UI. Its talor mainly at develo...PdxCodeCamp: Web application for Portland Code CampProjeto Vírus: Desenvolvimento do Jogo Virus em XNAsilverlight control - stars with rounded corners: Draw stars and cogs including rounded cornersSilverlight MathParser: Implementation of mathematical expressions parser to compute and functions.turing machine simulator: Project for JCE in course SW engeenering. Turing Machine simulator with GUI.WpD - Wallpapers Downloader: You can easy download wallpapers to your computer without any advertising or registration. On 5 minutes you can download so many wallpapers!New ReleasesAJAX Control Framework: v1.0.0.0: New AJAX project that helps you create AJAX enabled controls. Make use of control level AJAX methods, a Script Manager that works like you'd expect...AutoFixture: Version 1.1: This is version 1.1 of AutoFixture. This release contains no known bugs. Compared to Release Candidate 1 for version 1.1, there are no changes. Ho...AutoPoco: AutoPoco 0.3: Method Invocation in configuration Custom type providers during configuration Method invocation for generationBacicworx (Basic Services Framework): 3.0.10.410 (Beta): Major update, winnowing, and recode of the library. Removed redundant classses and methods which have similar functionality to those available in ...Bluetooth Radar: Version 1.5: Mostly UI and Animation Changes.BUtil: BUtil 4.9: 1. Icons of kneo are almost removed 2. Deployment was moved to codeplex.com 3. Adding of storages was unavailable when any of storages are used FIXEDcrudwork library: crudwork 2.2.0.3: few bug fixes new object viewer - allow the user to view and change an object through the property grid and/or the simple XML editor pivot table ...EnhSim: Release v1.9.8.5: Release v1.9.8.5Removed the debugging output from the Armor Penetration change.EnhSim: Release v1.9.8.6: Release v1.9.8.6Updated release to include the correct version of EnhSimGUIEvaluate: Evaluate Library: This file contains Evaluate library source code under Visual Studio project. Also, there is a sample project to see the use.ExcelDna: ExcelDna Version 0.25: This is an important bugfix release, with the following changes: Fix case where unpacked .config temp file might not be deleted. Fix compiler pro...FamAccountor: 家庭账薄 预览版v0.0.1: 家庭账薄 预览版v0.0.1 该版本提供基本功能，还有待扩展! Feature: 实现基本添加、编辑、删除功能。FamAccountor: 家庭账薄 预览版v0.0.2: 家庭账薄 预览版v0.0.2 该版本提供基本功能，还有待扩展! Feature: 添加账户管理功能。Folder Bookmarks: Folder Bookmarks 1.4.2: This is the latest version of Folder Bookmarks (1.4.2), with general improvements. It has an installer - it will create a directory 'CPascoe' in My...GKO Libraries: GKO Libraries 0.3 Beta: Added Silverlight support for Gko.Utils Added ExtensionsHash Calculator: HashCalculator 1.2: HashCalculator 1.2HD-Trailers.NET Downloader: Version: TrailersOnly if set to 'true' only titles with 'trailer' in the title will be download MinTrailerSize Added a minimum trailer size, this avoids t...Home Access Plus+: v3.2.6.0: v3.2.5.1 Release Change Log: Add lesson naming Fixed a bug in the help desk which was rendering the wrong URL for tickets Planning has started ...HTML Ruby: 6.20.0: All new concept, all new code. Because this release does not support complex ruby annotations, "Furigana Injector" is not supported by this release...HTML Ruby: 6.20.1: Fixed problem where ruby with closed tags but no rb tag will result in empty page Added support for complex ruby annotation (limited single ruby)...K8061.Managed: K8061.Managed: This is a pre-compilled K8061.Managed.DLL file release 1.0.Kooboo CMS: Kooboo CMS 2.1.0.0: Users of Kooboo CMS 2.0, please use the "Check updates" feature under System to upgrade New featuresWebDav support You can now use tools like w...Kooboo forum: Kooboo Forum Module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Kooboo GoogleAnalytics: Kooboo GoogleAnalytics Module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Kooboo wiki: Kooboo CMS Wiki module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Mavention: Mavention Simple SiteMapPath: Mavention Simple SiteMapPath is a custom control that renders breadcrumbs as an unordered list what makes it a perfect solution for breadcrumbs on ...MetaSharp: MetaSharp v0.3: MetaSharp v0.3 Roadmap: Oslo Independence Custom Grammar library Improved build environment dogfooding Project structure simplificationsRoTwee: RoTwee (10.0.0.7): New feature of this version is support for mouse wheel. You can rotate tweets rotating mouse wheel.silverlight control - stars with rounded corners: first step: These are the first examples.Silverlight MathParser: Silverlight MathParser 1.0: Implementation of mathematical expressions parser to compute and functions.SimpleGeo.NET: SimpleGeo.NET example website project: ConfigurationYou must change these three configuration values in AppSettings.config: Google Maps API key: for the maps on the test site. Get one he...StickyTweets: 0.6.0: Version 0.6.0 Code - PERFORMANCE Hook into Async WinInet to perform async requests without adding an additional thread Code - Verify that async r...System.Html: Version 1.3; fixed bugs and improved performance: This release incorporates bug fixes, a new normalize method proposed by RudolfHenning of Codeplex.VCC: Latest build, v2.1.30410.0: Automatic drop of latest buildVFPX: FoxTabs 0.9.2: The following issues were addressed: 26744 24954 24767Visual Studio DSite: Advanced Guessing Number Game (Visual C++ 2008): A guessing number game made in visual c 2008.WpD - Wallpapers Downloader: WpD v0.1: My first release, I hope you enjoyMost Popular ProjectsWBFS ManagerRawrASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesFacebook Developer ToolkitMost Active ProjectsRawrnopCommerce. Open Source online shop e-commerce solution.AutoPocopatterns & practices – Enterprise LibraryShweet: SharePoint 2010 Team Messaging built with PexFarseer Physics EngineNB_Store - Free DotNetNuke Ecommerce Catalog ModuleIonics Isapi Rewrite FilterBlogEngine.NETBeanProxy

  Read the article

• Connecting Linux to WatchGuard Firebox SSL (OpenVPN client)

  Recently, I got a new project assignment that requires to connect permanently to the customer's network through VPN. They are using a so-called SSL VPN. As I am using OpenVPN since more than 5 years within my company's network I was quite curious about their solution and how it would actually be different from OpenVPN. Well, short version: It is a disguised version of OpenVPN. Unfortunately, the company only offers a client for Windows and Mac OS which shouldn't bother any Linux user after all. OpenVPN is part of every recent distribution and can be activated in a couple of minutes - both client as well as server (if necessary). WatchGuard Firebox SSL - About dialog Borrowing some files from a Windows client installation Initially, I didn't know about the product, so therefore I went through the installation on Windows 8. No obstacles (and no restart despite installation of TAP device drivers!) here and the secured VPN channel was up and running in less than 2 minutes or so. Much appreciated from both parties - customer and me. Of course, this whole client package and my long year approved and stable installation ignited my interest to have a closer look at the WatchGuard client. Compared to the original OpenVPN client (okay, I have to admit this is years ago) this commercial product is smarter in terms of file locations during installation. You'll be able to access the configuration and key files below your roaming application data folder. To get there, simply enter '%AppData%\WatchGuard\Mobile VPN' in your Windows/File Explorer and confirm with Enter/Return. This will display the following files: Application folder below user profile with configuration and certificate files From there we are going to borrow four files, namely: ca.crt client.crt client.ovpn client.pem and transfer them to the Linux system. You might also be able to isolate those four files from a Mac OS client. Frankly, I'm just too lazy to run the WatchGuard client installation on a Mac mini only to find the folder location, and I'm going to describe why a little bit further down this article. I know that you can do that! Feedback in the comment section is appreciated. Configuration of OpenVPN (console) Depending on your distribution the following steps might be a little different but in general you should be able to get the important information from it. I'm going to describe the steps in Ubuntu 13.04 (Raring Ringtail). As usual, there are two possibilities to achieve your goal: console and UI. Let's what it is necessary to be done. First of all, you should ensure that you have OpenVPN installed on your system. Open your favourite terminal application and run the following statement: $ sudo apt-get install openvpn network-manager-openvpn network-manager-openvpn-gnome Just to be on the safe side. The four above mentioned files from your Windows machine could be copied anywhere but either you place them below your own user directory or you put them (as root) below the default directory: /etc/openvpn At this stage you would be able to do a test run already. Just in case, run the following command and check the output (it's the similar information you would get from the 'View Logs...' context menu entry in Windows: $ sudo openvpn --config client.ovpn Pay attention to the correct path to your configuration and certificate files. OpenVPN will ask you to enter your Auth Username and Auth Password in order to establish the VPN connection, same as the Windows client. Remote server and user authentication to establish the VPN Please complete the test run and see whether all went well. You can disconnect pressing Ctrl+C. Simplifying your life - authentication file In my case, I actually set up the OpenVPN client on my gateway/router. This establishes a VPN channel between my network and my client's network and allows me to switch machines easily without having the necessity to install the WatchGuard client on each and every machine. That's also very handy for my various virtualised Windows machines. Anyway, as the client configuration, key and certificate files are located on a headless system somewhere under the roof, it is mandatory to have an automatic connection to the remote site. For that you should first change the file extension '.ovpn' to '.conf' which is the default extension on Linux systems for OpenVPN, and then open the client configuration file in order to extend an existing line. $ sudo mv client.ovpn client.conf $ sudo nano client.conf You should have a similar content to this one here: dev tunclientproto tcp-clientca ca.crtcert client.crtkey client.pemtls-remote "/O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server"remote-cert-eku "TLS Web Server Authentication"remote 1.2.3.4 443persist-keypersist-tunverb 3mute 20keepalive 10 60cipher AES-256-CBCauth SHA1float 1reneg-sec 3660nobindmute-replay-warningsauth-user-pass auth.txt Note: I changed the IP address of the remote directive above (which should be obvious, right?). Anyway, the required change is marked in red and we have to create a new authentication file 'auth.txt'. You can give the directive 'auth-user-pass' any file name you'd like to. Due to my existing OpenVPN infrastructure my setup differs completely from the above written content but for sake of simplicity I just keep it 'as-is'. Okay, let's create this file 'auth.txt' $ sudo nano auth.txt and just put two lines of information in it - username on the first, and password on the second line, like so: myvpnusernameverysecretpassword Store the file, change permissions, and call openvpn with your configuration file again: $ sudo chmod 0600 auth.txt $ sudo openvpn --config client.conf This should now work without being prompted to enter username and password. In case that you placed your files below the system-wide location /etc/openvpn you can operate your VPNs also via service command like so: $ sudo service openvpn start client $ sudo service openvpn stop client Using Network Manager For newer Linux users or the ones with 'console-phobia' I'm going to describe now how to use Network Manager to setup the OpenVPN client. For this move your mouse to the systray area and click on Network Connections => VPN Connections => Configure VPNs... which opens your Network Connections dialog. Alternatively, use the HUD and enter 'Network Connections'. Network connections overview in Ubuntu Click on 'Add' button. On the next dialog select 'Import a saved VPN configuration...' from the dropdown list and click on 'Create...' Choose connection type to import VPN configuration Now you navigate to your folder where you put the client files from the Windows system and you open the 'client.ovpn' file. Next, on the tab 'VPN' proceed with the following steps (directives from the configuration file are referred): General Check the IP address of Gateway ('remote' - we used 1.2.3.4 in this setup) Authentication Change Type to 'Password with Certificates (TLS)' ('auth-pass-user') Enter User name to access your client keys (Auth Name: myvpnusername) Enter Password (Auth Password: verysecretpassword) and choose your password handling Browse for your User Certificate ('cert' - should be pre-selected with client.crt) Browse for your CA Certificate ('ca' - should be filled as ca.crt) Specify your Private Key ('key' - here: client.pem) Then click on the 'Advanced...' button and check the following values: Use custom gateway port: 443 (second value of 'remote' directive) Check the selected value of Cipher ('cipher') Check HMAC Authentication ('auth') Enter the Subject Match: /O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server ('tls-remote') Finally, you have to confirm and close all dialogs. You should be able to establish your OpenVPN-WatchGuard connection via Network Manager. For that, click on the 'VPN Connections => client' entry on your Network Manager in the systray. It is advised that you keep an eye on the syslog to see whether there are any problematic issues that would require some additional attention. Advanced topic: routing As stated above, I'm running the 'WatchGuard client for Linux' on my head-less server, and since then I'm actually establishing a secure communication channel between two networks. In order to enable your network clients to get access to machines on the remote side there are two possibilities to enable that: Proper routing on both sides of the connection which enables both-direction access, or Network masquerading on the 'client side' of the connection Following, I'm going to describe the second option a little bit more in detail. The Linux system that I'm using is already configured as a gateway to the internet. I won't explain the necessary steps to do that, and will only focus on the additional tweaks I had to do. You can find tons of very good instructions and tutorials on 'How to setup a Linux gateway/router' - just use Google. OK, back to the actual modifications. First, we need to have some information about the network topology and IP address range used on the 'other' side. We can get this very easily from /var/log/syslog after we established the OpenVPN channel, like so: $ sudo tail -n20 /var/log/syslog Or if your system is quite busy with logging, like so: $ sudo less /var/log/syslog | grep ovpn The output should contain PUSH received message similar to the following one: Jul 23 23:13:28 ios1 ovpn-client[789]: PUSH: Received control message: 'PUSH_REPLY,topology subnet,route 192.168.1.0 255.255.255.0,dhcp-option DOMAIN ,route-gateway 192.168.6.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.6.2 255.255.255.0' The interesting part for us is the route command which I highlighted already in the sample PUSH_REPLY. Depending on your remote server there might be multiple networks defined (172.16.x.x and/or 10.x.x.x). Important: The IP address range on both sides of the connection has to be different, otherwise you will have to shuffle IPs or increase your the netmask. {loadposition content_adsense} After the VPN connection is established, we have to extend the rules for iptables in order to route and masquerade IP packets properly. I created a shell script to take care of those steps: #!/bin/sh -eIPTABLES=/sbin/iptablesDEV_LAN=eth0DEV_VPNS=tun+VPN=192.168.1.0/24 $IPTABLES -A FORWARD -i $DEV_LAN -o $DEV_VPNS -d $VPN -j ACCEPT$IPTABLES -A FORWARD -i $DEV_VPNS -o $DEV_LAN -s $VPN -j ACCEPT$IPTABLES -t nat -A POSTROUTING -o $DEV_VPNS -d $VPN -j MASQUERADE I'm using the wildcard interface 'tun+' because I have multiple client configurations for OpenVPN on my server. In your case, it might be sufficient to specify device 'tun0' only. Simplifying your life - automatic connect on boot Now, that the client connection works flawless, configuration of routing and iptables is okay, we might consider to add another 'laziness' factor into our setup. Due to kernel updates or other circumstances it might be necessary to reboot your system. Wouldn't it be nice that the VPN connections are established during the boot procedure? Yes, of course it would be. To achieve this, we have to configure OpenVPN to automatically start our VPNs via init script. Let's have a look at the responsible 'default' file and adjust the settings accordingly. $ sudo nano /etc/default/openvpn Which should have a similar content to this: # This is the configuration file for /etc/init.d/openvpn## Start only these VPNs automatically via init script.# Allowed values are "all", "none" or space separated list of# names of the VPNs. If empty, "all" is assumed.# The VPN name refers to the VPN configutation file name.# i.e. "home" would be /etc/openvpn/home.conf#AUTOSTART="all"#AUTOSTART="none"#AUTOSTART="home office"## ... more information which remains unmodified ... With the OpenVPN client configuration as described above you would either set AUTOSTART to "all" or to "client" to enable automatic start of your VPN(s) during boot. You should also take care that your iptables commands are executed after the link has been established, too. You can easily test this configuration without reboot, like so: $ sudo service openvpn restart Enjoy stable VPN connections between your Linux system(s) and a WatchGuard Firebox SSL remote server. Cheers, JoKi

  Read the article

• Customize the Windows Media Center Start Menu with Media Center Studio

  - by DigitalGeekery

  Do you ever wish you could change the WMC start menu? Maybe move some of the tiles and strips around to different locations, add new ones, or eliminate some altogether? Today we look at how to do it using Media Center Studio. Download and install Media Center Studio. (Download link below) You’ll also want to make sure you have Windows Media Center closed before running Media Center Studio. Many of the actions cannot be performed with Media Center open. Once installed, you can open Media Center Studio from the Windows Start Menu. When you first open Media Center Studio you’ll be on the Themes tab. Click on the Start Menu tab. It should be noted that Media Center Studio is a Beta application, and it did crash on us a few times, so it’s a good idea to save your work frequently. You can save your changes by selecting Save on the Home tab, or by clicking the small disk icon at the top left. We also found that that trying to launch Media Center from the Start Media Center button on the application ribbon typically didn’t work. Opening Windows Media Center from the Windows Start Menu is preferred.   When you’re on the Start Menu tab you will see the Windows Media Center menu strips and tiles. Click the arrows located at the right, left, top, and bottom of the screen to scroll through the various menu strips.   Hiding and Removing Tiles and Menu Strips. If there is an entire menu strip that you never use and would like to remove from Media Center, simply uncheck the box to the left of the the title above that menu strip. If you’d like to hide individual tiles, uncheck the box next to the name of the individual tile. Renaming Tiles and Strips To rename a tile or menu strip, click on the small notepad icon next to the title. Note: If you do not see a small notepad icon next to the title, then the title is not editable. This applies to many of the “Promo” tiles. The title will turn into a text input box so that you can edit the name. Click away from the text box when finished. Here we will change the title of the default Movie strip to “Flicks.” Change the Default Tile and Menu Strip The Default menu strip is the strip that is highlighted, or on focus, when you open Media Center.   To change the default strip, simply click once on another strip to highlight it, and then save your work. In our example, I’m going to make our newly renamed “Flicks” strip the default.   Each menu strip has a default tile. This is the tile that is active, or on focus, when you select the menu strip. To change the default tile on a strip, click once on the tile. You will see it outlined in light blue. Now just simply save your changes. In our example below, we’ve changed the default tile on the TV strip to “guide.”   Moving Tiles and Menu Strips You can move an entire Menu Strip up or down on the screen. When you hover your mouse over the a menu strip, you will see up and down arrows appear to the right and left of the title. Click on the arrows to move the strip up or down.   You will see the menu strip appear in it’s new position.   To move a tile to a new menu strip, click and drag the tile you’d like to move. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. Drag and drop the tile onto to any of these green plus signs to move it to that location. When you’ve dragged the tile over an acceptable position, you’ll see the  red “Move” label next to your cursor turn to a blue “Move to” label. Now you can drop the tile into position. You’ll see the tile located in it’s new position.   Adding a New Custom Menu Strip Click on the Start Menu tab and then select the Menu Strip button.   You will see a new Custom Menu strip appear on your Start Menu with the default name of Custom menu. You can change the name by clicking on the notepad icon just as we did earlier. For our example, we’ll change the name of the new strip to Add-ins. To add a new tile, click on Entry Points at the lower left of the application window. This will reveal all of your available Entry Points that can be added to the Media Center Menu. You should see the built-in Media Center Games and any Media Center Plug-ins you have added to your system. You can then drag and drop any of the Entry Points onto any of the Menu Strips. Below we’ve added Media Browser to our custom Add-ins menu strip. You can also add additional applications to launch directly from Media Center. Click on the Application button on the Start Menu tab. Note: Many applications may not work with your remote, but with keyboard and mouse only.    Type in a title which will appear under the tile in Media Center, and then type the path to the application. In our example, we will add Internet Explorer 8. Note: Be sure to add the actual path to the application and not just a link on the desktop. Click any of the check boxes to select any options under Required Capabilities. You can also browse to choose an image if you don’t care for the image that appears automatically.   Next, you can select keyboard strokes to press to exit the application and return to Media Center. Click the green plus (+) button. When prompted, press a key you’ll use to close the program. Repeat the process if you’d also like to select a keystroke to kill the program.   You’ll see your button programs listed below. When you’re finished, save your work and close out of Media Center Studio.   Now your new program entry point will appear in the Entry Points section. Drag the icon to the desired position on the Start Menu and save again before exiting Media Center Studio. When you open Media Center you will see your new application on the start menu. Click the tile to open the application just as you would any other tile. The application will open and minimize Media Center. When you press the key you choose to close the program, Windows Media Center will automatically be restored. Note: You can also exit the application through normal methods by clicking the red “X” or File > Exit. Conclusion Media Center Studio is a Beta application which the developer freely admits still has some bugs. Despite it’s flaws Media Center Studio is a powerful tool, and when it comes to customizing your Media Center start menu, it’s pretty much the only game in town. It works with both Vista and Windows 7, and according to the developer, has not been officially tested with extenders. Media Center Studio can also be used to add custom themes to Windows 7 Media Center and we’ll be covering that in a future article. Looking for more ways to customize your Media Center experience? Be sure to check out our earlier posts on Media Browser, as well as how to add Hulu, Boxee, and weather conditions your Windows 7 Media Center. Download Media Center Studio Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Rip a Music CD in Windows 7 Media CenterSchedule Updates for Windows Media CenterStartup Customizations for Media Center in Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall

  Read the article

• CodePlex Daily Summary for Wednesday, December 08, 2010

  CodePlex Daily Summary for Wednesday, December 08, 2010Popular ReleasesAlgorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.SubtitleTools: SubtitleTools 1.1: Added a better ToUTF-8 converter (not just from windows-1256 to utf-8). Refactored OpenFileDialogs to a more MVVM friendly behavior.SuperSocket, an extensible socket application framework: SuperSocket 1.0 SP1: Fixed bugs: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration valueHydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.1.340: HydroDesktop 1.1 Stable Release (Build 340)CslaGenFork: CslaGenFork 4.0 CTP 2: The version is 4.0.1 CTP2 and was released 2010 December 7 and includes the following files: CslaGenFork 4.0.1-2010-12-07 Setup.msi Templates-2010-10-07.zip For getting started instructions, refer to How to section. Overview of the changes Since CTP1 there were 53 work items closed (28 features, 24 issues and 1 task). During this 60 days a lot of work has been done on several areas. First the stereotypes: EditableRoot is OK EditableChild is OK EditableRootCollection is OK Editable...My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.EnhSim: EnhSim 2.2.0 ALPHA: 2.2.0 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated En...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...MiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (December 2010): The release is targetted for stable daily use. With improved performance and enhanced compatibility with several latest PHP open source applications; it makes this release perfect replacement of your old PHP runtime. Changes made within this release include following and much more: Performance improvements based on real-world applications experience. We determined biggest bottlenecks and we found and removed overheads causing performance problems in many PHP applications. Reimplemented nat...Chronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide New ProjectsCore Motives Tracking Web Part: This C# web part was created to allow users of SharePoint 2007 to place CoreMotives (http://www.coremotives.com) tracking code on any web part page. Can also be used in master pages and page layouts.CPEBook: OsefEatFrsh: Keep Track of contents of your Fridge. Eat items while they are still fresh.ENUH10Publisher: Et prosjekt for studenter ved eCademy H10EVE Community Portal: EVE Community Portal is a complete community portal for EVE alliances (and corporations), which will host everything an eve alliance needs, from a forum and blogs to every tool you could whish for and more...FER CSLA.NET Compact: .NET Compact Framework edition of CSLA.NET application framework.Finger Mouse: it's a good idea and simple program help you to use the mouse feature from webcam (without mouse) note : you should have i3 or higher processorGambaru: Gambaru é um techdemo de um game 3D desenvolvido em Delphi. Utiliza engine de física Newton e Open GL (pacote GL-Scene). Foi apresentado como trabalho de conclusão de curso no SENAC-SP por Marcelo, Daniel e Thais em 2007. Exploramos o universo Samurai. Contribua, programe, sonhe!GameBoyEmu: ????，GameBoy ???GenericList Inherits IDataReader ( ListEx<T>() : IDataReader ): This Generic List implements the IDataReader interface and displays the usage of Linq, Lamba expressions and some creative thought around working with collection types. I hope it can serve as reference to your projects.Guard: Provides the argument validation class Guard, ubiquitously used throughout all .NET projects but with no central place for updates.HolidayChecker Library: HolidayChecker Library is a usefull library that allows programmers to know if a certain date is a festivity or not. This library also allows the calculation of Easter day based on the algorithm of Tondering. It's developed in C#.JuniorTour - Junior Golf Tour Silverlight Application: JuniorTour makes it easier for golf tour operators to publish tournament results for multiple divisions and multiple seasons. You'll no longer have to manually edit player pages, tournament results, or compute rankings. It's developed in C# and Silverlight.LibGT: LibGT aims to reduce the amount of overall code a programmer has to write in C#. This library provides many shortcuts and extension methods to facilitate robust development rapidly even without the use of an IDE.Mayhem: Mayhem makes it simple for end users to control complex events with their PCs. Whether you want to Update a Twitter status when your cat is detected by your webcam or monitor your serial ports and trigger events, it's no problem with Mayhem -- wreak your own personal havoc.mmht: ???????，??????MobilePolice: my mobilepolice projectOpenCallback: This is a implementation of the callback handler pattern that allows you to invoke the callback handle methods with out type switching or if...else if chains.Project Baron: Simple, yet powerful Project Management System.PS3Lib for SDK 1.92: Création d'une librairie de ceveloppement pour le SDK 1.92Remote Controller for Trackmania: Evzrecon is a remote controller for Trackmania Forever dedicated servers, much like XASECO but written in Java.SharePointSocial: SharePointSocial is focused on taking social interaction within SharePoint to the next level, extending beyond the corporate boundaries. Corporate listening, one-click interaction through key social media outlets and data-driven management and reporting are planned features.SIGS: ssSimple Routing: Simple Routing allows you to associate arbitrary routes with static methods in an ASP.NET application through attribution.SlimCRM: Aplicación de referencia de buenas prácticas de programaciónTalkBoard: ????????，?????????！uHelpsy - Umbraco Helper Library: uHelpsy is a tiny (but growing) library which makes programatically interacting with Umbraco 4.5.2 much more pleasant. It provides helper methods for creating and updating nodes, working with the Umbraco cache, and dealing with unpublished nodes. VCSS: VCSS is a decorated version of CSS (Cascading Style Sheets) that allows you to specify variables and also nest rules. The VCSS file can be compiled into a standard CSS file to be used on any website.Vote: ?，???????????????！WP7 GPS Simulator: Use this project to simulate GPS while doing development on your Windows Phone 7.WPF_CAD: this proyect it's a college proyect form grafic computer course. Consist in the development of a cad soft implementing all grafics algoritms.Xml-Racing: Réaliser une application Web 3-tiers qui permette d'interroger une BD et de restituer les infos sous forme de graphiques et cartes.

  Read the article

• CodePlex Daily Summary for Wednesday, April 14, 2010

  CodePlex Daily Summary for Wednesday, April 14, 2010New Projectsbitly.net: A bitly (useing Version 3 of their API's) client for .NET (Version 3.5)Chord Sheet Editor Add-In for Word: Transpose music chord sheets (guitar chord sheets, etc.) in Microsoft Word using this VSTO Add-In.CloudSponge.Net: Simple .Net wrapper for www.cloudsponge.com's REST API.Database Searcher: This is a small tool for searching a typed value inside all type matching columns and rows of a database. For connecting the database a .NET data p...Edu Math: PL: Program Edu Math, ma na celu ułatwienie wykonywania skomplikowanych obliczeń oraz analiz matematycznych. EN: Program Edu Math, aims to facilita...fluent AOP: This project is not yet publishedFNA Fractal Numerical Algorithm for a new encryption technology: FNA Fractal Numerical Algorithm for a new encryption technology is a symmetrical encryption method based on two algorithms that I developed for: 1....Image viewer cum editor: This is a project on image viewing and editing. The project have following features VIEWER: Album Password security for albums Inbuilt Browser...JEngine - Tile Map Editor v1: JEngine - Tile Map Editor v1Jeremy Knight: Code samples, snippets, etc from my personal blog.lcskey: lcs test codemoldme: testesds ssdfsdfsNanoPrompt: NanoPrompt makes it more pleasant to work on a command-line. Features: - syntax-highlighting - graphical output possible - up to 12 "displays" (cha...nirvana: for testOffInvoice Add-in for MS Office 2010: Project Description: The project it's based in the ability to extend funtionality in the Microsoft Office 2010 suite.PowerSlim - Acceptance Testing for Enterprise Applications: PowerSlim makes it possible to use PowerShell in the acceptance testing. It is a small but powerful plugin for the Fitnesse acceptance testing fram...Proxi [Proxy Interface]: Proxi is a light-weight library that allows to generate dynamic proxies using different providers. By utilizing Proxi frameworks and libraries can ...Reality show about ASP.NET development: This application is created with using ASP.NET and Microsoft SQL Server for the demo purposes with the following target goals: example of usage fo...RecordLogon.vbs login script: RecordLogon.vbs is a script applied at logon via Group or Local policy. It records specific user and computer information and writes the data to a ...SpaceGameApplet: A java game ;)SpaceShipsGame: A game with space ships ";..;"SysHard: Info for Linux system.System Etheral™ - Developer: SE Dev (System Etheral™ - Developer) is an OS (Operating System) that is a bit like UNIX but it is for you to edit! We have not gave you much but w...TimeSheet Reporting Silverlight: TimeSheet Reporting application in Silver light. Contains a data grid containing combo boxes bound to different data sources like Members and Proje...TrayBird: A minimalistic twitter client for windows.Twitter4You: This appliction for windows is a communication for twitter!WCF RIA Services (+ PRISM + MVVM) LoB Application: WCF RIA Services sample LoB application (case study) built on PRISM with Entity Framework Model. It's a simple application for a fictive company Te...New ReleasesBluetooth Radar: Version 1.9: Change Search and Close Icons Add Device Detail ViewCloudSponge.Net: Alpha: Initial alpha release very limited tested includes *CloudSponge.dll *Sponge.exe (simple cmd line utility to import contacts, and test API)Global Assembly Cache comparison tool: GAC Compare version 3.1: Version 3.1Added export assemblies to directory functionalityHTML Ruby: 6.21.2: Some style adjustments Ruby text spacing is spaced out to keep Firefox responsive Status bar is backJEngine - Tile Map Editor v1: JEngine - Tile Map Editor V1: JEngine - Tile Map Editor V1 Discription SoonJeremy Knight: SQL Padding Functions v1.0: The entire scripts, including if exists logic, for SQL Padding Functions are included in this download.jqGrid ASP.Net MVC Control: Version 1.1.0.0: UPDATE 14-04 Fixed a small problem with the custom column renderers controller, And added a new example for a cascading-dropdownlist grid column A...JulMar MVVM Helpers + Behaviors: Version 1.06: This version is an update to MVVM Helpers that is built on Visual Studio 2010 RTM. It includes some minor updates to classes and a few new convert...lcskey: v 1.0: v1.0 基本能跑，未详细测试LINQ To Blippr: LINQ to Blippr: Download to test out and play around LINQ to Blippr based from blog posts: http://consultingblogs.emc.com/jonsharrattLINQ to XSD: 1.1.0: The LINQ to XSD technology provides .NET developers with support for typed XML programming. LINQ to XSD contributes to the LINQ project (.NET Langu...LINQ to XSD: 2.0.0: It is the same code as version 1.1 but compiled for .NET framework 4.0. Requirements: .NET Framework 4.0.LocoSync: LocoSync v0.1r2010.04.12: Second Alpha version of LocoSync. Download unzip and run setup. It will download the .NET framework if needed. It will create an icon in the start ...mojoPortal: 2.3.4.2: see release note on mojoportal.com http://www.mojoportal.com/mojoportal-2342-released.aspxNanoPrompt: Setup (.NET 4.0) - 20100414-A Nightly: The setup for NanoPrompt 0.Xa for Intel-80386- (32 or 64 bits) or Intel-Itanium-compatible targets with installed .NET-Framework 4.0 Client Profile...Neural Cryptography in F#: Neural Cryptography 0.0.5: This release provides the basic functionality that this project was supposed to have from the very beginning: it can hash strings using neural netw...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.121: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...nRoute Framework: nRoute.Toolkit Release Version 0.4: Note, both "nRoute.Framework (x3)" and "nRoute.Toolkit (x3)" zip files contains binaries for Web, Desktop and Mobile targets. Also this release wa...Numina Application/Security Framework: Numina.Framework Core 50381: Rebuilt using .NET 4 RTM One minor change made to the web.config file - added System.Data.Linq to the assemblies list.PokeIn Comet Ajax Library: PokeIn Lib and Sample: Great sample with usefull comet ajax library! .Net 2.0 Note : It was very easy to build this project with Visual Studio 10 ;)Powershell Zip File Export/Import Cmdlet Module: PowershellZip 0.1.0.3: Powershell-Zip 0.1.0.3 contains the cmdlets Export-Zip and Import-ZipPowerSlim - Acceptance Testing for Enterprise Applications: PowerSlim 0.1: Just PowerSlim. http://vlasenko.org/2010/04/09/howto-setup-powerslim-step-by-step/RDA Collaboration Team Projects: SharePoint BPOS Logging Framework: RDA's SharePoint BPOS logging framework is a very lightweight WSP Builder project that provides the following items: A Site feature that creates a...RecordLogon.vbs login script: LogonSearchGadget: This is the Windows Gadget companion for RecordLogon.RecordLogon.vbs login script: LogonSearchTool.hta: This is the HTA standalone script that runs inside of an IE window. The HTA is what presents the data the recordlogon.vbs creates. Please remember...RecordLogon.vbs login script: recordlogon.vbs: This is the main script that grabs the logon and computer information and dumps the info as text files to a defined folder share. Make sure to chec...Rensea Image Viewer: RIV 0.4.3: New Release of RIV. Added many many features! You would love it. You would need .NET Framework 4.0 to make it run With separated RIV up-loader, to...SharePoint Site Configurator Feature: SharePoint Site Configurator V2.0: Updated for SharePoint 2010 and added quite a lot of new functions. Compatible with SP2010, MOSS and WSS 3.0Sharp Tests Ex: Sharp Tests Ex 1.0.0RC2: Project Description #TestsEx (Sharp Tests Extensions) is a set of extensible extensions. The main target is write short assertions where the Visual...SQL Server Extended Properties Quick Editor: Release 1.6.2: Whats new in 1.6.2: Fixed several errors in LinqToSQL generated classes, solved generation EntitySet members. Its highly recomended to download and...SSRS SDK for PHP: SugarCRM Sample for SSRSReport: The zip file contains a sample SugarCRM module that shows how the SSRS SDK for PHP can be used to add simple reporting capabilities to the SugarCRM...System Etheral™ - Developer: System Etheral Dev v1.00: Comes with a VERY basic text editor and the ability to shutdown. Hopefully we will have a lot more stuff in version 1.01! But this is fine for now....Text to HTML: 0.4.2.0: ¡Gracias a Martin Lemburg por avisar de los errores y por sus sugerencias! Cambios de la versiónSustitución de los caracteres especiales alemanes:...TimeSheet Reporting Silverlight: v1.0 Source Code: Source CodeTwitter4You: Twitter 4 You - Version 1.0 (TESTER): Serialcode: http://joeynl.blogspot.com/2010/04/test-version-of-t4yv1.html Thanks JoeyNLVCC: Latest build, v2.1.30413.0: Automatic drop of latest buildVisioAutomation: VisioAutomation 2.5.1: VisioAutomation 2.5.1- Moved to Visual Studio 2010 (Still using .NET Framework 3.5) Changes Since 2.5.0- Solution and Projects are all based on Vi...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelFacebook Developer ToolkitMost Active ProjectsRawrAutoPocopatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationFarseer Physics EngineNB_Store - Free DotNetNuke Ecommerce Catalog ModuleBeanProxyjQuery Library for SharePoint Web ServicesBlogEngine.NETFacebook Developer Toolkit

  Read the article

• CodePlex Daily Summary for Tuesday, March 30, 2010

  CodePlex Daily Summary for Tuesday, March 30, 2010New ProjectsCloudMail: Want to send email from Azure? Cloud Mail is designed to provide a small, effective and reliable solution for sending email from the Azure platfor...CommunityServer Extensions: Here you can find some CommunityServer extensions and bug fixes. The main goal is to provide you with the ability to correct some common problems...ContactSync: ContactSync is a set of .NET libraries, UI controls and applications for managing and synchronizing contact information. It includes managed wrapp...Dng portal: DNG Portal base on asp.net MVCDotNetNuke Referral Tracker: The Referral Tracker module allows you to save URL variables, the referring page, and the previous page into a session variable or cookie. Then, th...Foursquare for Windows Phone 7: Foursquare for Windows Phone 7.GEGetDocConfig: SharePoint utility to list information concerning document libraries in one or more sites. Displays Size, Validity, Folder, Parent, Author, Minor a...Google Maps API for .NET: Fast and lightweight client libraries for Google Maps API.kbcchina: kbc chinaLoad Test User Mock Toolkits: 用途 This project is a framework mocking the user actvities with VSTS Load Test tool to faster the test script development. 此项目包括一套模拟用户行为的通用框架，可以简化...Resonance: Resonance is a system to train neural networks, it allows to automate the train of a neural network, distributing the calculation on multiple machi...SharePoint Company Directory / Active Directory Self Service System: This is a very simple system which was designed for a Bank to allow users to update their contact information within SharePoint . Then this info ca...SmartShelf: Manage files and folders on Windows and Windows Live.sysFix: sysFix is a tool for system administrators to easily manage and fix common system errors.xnaWebcam: Webcam usage in XNA GameStudio 3.1New ReleasesAll-In-One Code Framework: All-In-One Code Framework 2010-03-29: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Samples for Azure Name Des...ARSoft.Tools.Net - C# DNS and SPF Library: 1.3.0: Added support for creating own dns server implementations. Added full IPv6 support to dns client Some performance optimizations to dns clientArtefact Animator: Artefact Animator - Silverlight 3 and WPF .Net 3.5: Artefact Animator Version 2.0.4.1 Silverlight 3 ArtefactSL.dll for both Debug and Release. WPF 3.5 Artefact.dll for both Debug and Release.BatterySaver: Version 0.4: Added support for a system tray icon for controlling the application and switching profiles (Issue)BizTalk Server 2006 Orchestration Profiler: Profiler v1.2: This is a point release of the profiler and has been updatd to work on 64 bit systems. No other new functionality is available. To use this ensure...CloudMail: CloudMail_0.5_beta: Initial public release. For documentation see http://cloudmail.codeplex.com/documentation.CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.44: See Source Code tab for recent change history.Dawf: Dual Audio Workflow: Beta 2: Fix little bugs and improve usablity by changing the way it finds the good audio.DotNetNuke Referral Tracker: 2.0.1: First releaseFoursquare for Windows Phone 7: Foursquare 2010.03.29.02: Foursquare 2010.03.29.02GEGetDocConfig: GEGETDOCCONFIG.ZIP: Installation: Simply download the zip file and extract the executable into its own directory on the SharePoint front end server Note: There will b...GKO Libraries: GKO Libraries 0.2 Beta: Added: Binary search Unmanaged wrappers, interop and pinvoke functions and structures Windows service wrapper Video mode helpers and more.....Google Maps API for .NET: GoogleMapsForNET v0.9 alpha release: First version, contains Core library featuring: Geocoding API Elevation API Static Maps APIGoogle Maps API for .NET: GoogleMapsForNET v0.9.1 alpha release: Fixed dependencies issues; added NUnit binaries and updated Newtonsoft Json library.Google Maps API for .NET: GoogleMapsForNET v0.9.2a alpha release: Recommended update.Code clean-up; did refactoring and major interface changes in Static Maps because it wasn't aligned to the 'simplest and least r...Home Access Plus+: v3.2.0.0: v3.2.0.0 Release Change Log: More AJAX to reduce page refreshes (Deleting, New Folder, Rename moved from browser popups) Only 3 Browser Popups (1...Html to OpenXml: HtmlToOpenXml 1.1: The dll library to include in your project. The dll is signed for GAC support. Compiled with .Net 3.5, Dependencies on System.Drawing.dll and Docu...Latent Semantic Analysis: Latest sources: Just the latest sources. Just click the changeset. Please note that in order to compile this code you need to download some additional code. You ...Load Test User Mock Toolkits: Load Test User Mock Toolkits Help Doc: Samples and The framework introduction. 包括框架介绍和典型示例Load Test User Mock Toolkits: Open.LoadTest.User.Mock.Toolkits 1.0 alpha: 此版本为非正式版本，未对性能方面进行优化。而且框架正在重构调整中。Mobile Broadband Logging Monitor: Mobile Broadband Logging Monitor 1.2.4: This edition supports: Newer and older editions of Birdstep Technology's EasyConnect HUAWEI Mobile Partner MWConn User defined location for s...Nito.KitchenSink: Version 3: Added Encoding.GetString(Stream, bool) for converting an entire stream into a string. Changed Stream.CopyTo to allow the stream to be closed/abor...Numina Application Framework: Numina.Framework Core 49088: Fixed Bug with Headers introduced in rev. 48249 with change to HttpUtil class. admin/User_Pending.aspx page users weren't able to be deleted Do...OAuthLib: OAuthLib (1.6.4.0): Fix for 6390 Make it possible to configure time out value.Quack Quack Says the Duck: Quack Quack Says The Duck 1.1.0.0: This new release pushes some work onto a background thread clearing issues with multiple screen clicks while the UI was blocking.Rapidshare Episode Downloader: RED v0.8.4: - Added Edit feature - Moved season & episode int to string into a separate function - Fixed some more minor issues - Added 'Previous' feature - F...RoTwee: RoTwee (8.1.3.0): Update OAuthLib to 1.6.4.0SharePoint Company Directory / Active Directory Self Service System: SharePoint Company Directory with AD Import: This is a very simple system which was designed for a Bank to allow users to update their contact information within SharePoint . Then this info ca...Simply Classified: v1.00.12: Comsite Simply Classified v1.00.12 - STABLE - Tested against DotNetNuke v4.9.5 and v5.2.x Bug Fixes/Enhancements: BUGFIX: Resolved issues with 1...sPATCH: sPatch v0.9: Completely Recoded with wxWidgetsFollowing Content is different to .NET Patcher no requirement for .NET Framework Manual patch was removed to av...SSAS Profiler Trace Scheduler: SSAS Profiler Trace Scheduler: AS Profiler Scheduler is a tool that will enable Scheduling of SQL AS Tracing using predefined Profiler Templates. For tracking different issues th...sysFix: sysfix build v5: A stable beta release, please refer to home page for further details.VOB2MKV: vob2mkv-1.0.4: This is a feature update of the VOB2MKV utility. The command-line parsing in the VOB2MKV application has been greatly improved. You can now get f...xnaWebcam: xnaWebcam 0.1: xnaWebcam 0.1 Program Version 0.1: -Show Webcam Device -Draw.String WebcamTexture.VideoDevice.Name.ToString() Instructions: 1. Plug-in your Webca...xnaWebcam: xnaWebcam 0.2: xnaWebcam 0.2 Version 0.2: -setResolution -Keys.Escape: this.Exit() << Exit the Game/Application. --- Version 0.1: -Show Webcam Device -Draw.Strin...xnaWebcam: xnaWebcam 0.21: xnaWebcam 0.2 Version 0.21: -Fix: Don't quit game/application after closing mainGameWindow -Fix: Text Position; Window.X, Window.Y --- Version 0.2...Xploit Game Engine: Xploit_1_1 Release: Added Features Multiple Mesh instancing.Xploit Game Engine: Xploit_1_1 Source Code: Updates Create multiple instances of the same Meshe using XModelMesh and XSkinnedMesh.Yakiimo3D: DX11 DirectCompute Buddhabrot Source and Binary: DX11 DirectCompute Buddhabrot/Nebulabrot source and binary.Most Popular ProjectsRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)LiveUpload to FacebookASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBlogEngine.NETLINQ to TwitterManaged Extensibility FrameworkMicrosoft Biology FoundationFarseer Physics EngineN2 CMSNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise Library

  Read the article

• CodePlex Daily Summary for Saturday, June 05, 2010

  CodePlex Daily Summary for Saturday, June 05, 2010New Projects555 Calculator: A simple calculator to help choosing resistor and capacitor values to get the frequency you're looking for on a 555 timer.BleQua .NET: PL: Program sieciowy BleQua .NET jest multi-komunikatorem. EN: Network program BleQua .NET is multicomunicator.ChatDiplomaWork: ChatSample is the sample project.CSUFVGDC Summer Jam: Repository for VGDC summer game jam.Database Export Wizard: ExportWizard is a Step Wizard for Database Export using ASP.net and SQL Server. It allows easy export in any of the standard formats: CSV, TXT, HTM...Dozer Enterprise Library for .NET: a light .net framework for enterprise applications developmentEmployee Management System: This is an Employee Management System. the goal here is to offer a software that caters to small to mid sized businesses for free. This program a...Fanray: My project on Codeplex.Infragistics Analytics Framework: This project includes wrappers for the Infragistics controls that integrate with the recently launched Microsoft Silverlight Analytics Framework. ...KIME Simio Extensions: This is the official project of KIME Solutions. Here you find any current developments of KIME that are publicly available. KIME develops extension...MindTouch Community Extensions: MindTouch Community Extentions is a Native C# extention library for MindTouch Core that will have Dekiscript functions for full coverage of the API...NginxTray: NginxTray allows you manage easily Nginx Web Server by a Tray icon.NStore: NStore is a virtual store example done with ASP.NET MVC 2.0 tecnologyProjet Campus Numerique + Appli Mobile: Projet de création d'un campus numérique pour l'ISEN et d'un application mobile d'accès.SharePoint 2010 Feature Upgrade Kit: A set of tools for managing upgradable Features in SharePoint 2010. (Upgrading Features is a means of deploying code/artifact updates to existing S...SiteMap Utility for DNN Blog Module: This is a mini-project which allows you to easily add or generate an XML site map to your DotNetNuke® website for the search engines to use to inde...Space Explorer: A small app to help users examine folders to see which files and subfolders are taking up space. Still in development, no releases available curren...SQL Compact Toolbox: SQL Compact Toolbox is a Visual Studio 2010 add-in, that adds scripting, import, export, migrate, rename, run script and other upcoming SQL Server ...Twilverlight: Twliverlight is TweetDeck mixed with Silverlight. Much as I like using TweetDeck, it hogs my memory out, so this is an attempt to write a memory-ef...Visual Studio 2010 FxCop Extension: Visual Studio 2010 FxCop Extension allows to integrate stand-alone FxCop into Visual Studio 2010. You'll be able to analysis your source code with ...VisualStudio 2010 JavaScript Outlining: Visual Studio 2010 editor extension for JavaScript code blocks and custom regions outlining Wiki Shelf: Wiki Shelf is a Wikipedia browser app. The goal is to bring the library experience of browsing books, studying, and researching to the Wikipedia u...X-Arena - Magic: Projeto de PDS2 no Curso de Tecnologia em Desenvolvimento de Software no CEFETRN. O desenvolvimento do jogo Quiz Arena possui como pr...New Releases555 Calculator: 555Calc release v1.0: The initial 1 point uh-oh release of 555Calc.BleQua .NET: BleQua .NET 1.0.0.0: First releaseChatterbot JBot: JBot 1.0.1.155: Change presentation technology from Window Forms to Widndown Presentation Fundation.Community Forums NNTP bridge: Community Forums NNTP Bridge V26: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Community Forums NNTP bridge: Community Forums NNTP Bridge V27: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Community Forums NNTP bridge: Community Forums NNTP Bridge V28: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...CSS 360 Planetary Calendar: Final Release: =============================================================================== Final Release Version: 2.0 Tools Used: - Collaboration, Releas...Database Export Wizard: Version 3: As described in CodeProject article: Database Export Wizard for ASP.net and SQL Server. http://www.codeproject.com/KB/aspnet/DatabaseExportWizard.aspxEdu Math: Edu Math 2.0.10.122: Change version .NET Framework.Employee Management System: V1 (beta): This version is still in beta testing. Any issues, comments or suggestions are greatly appreciated. The export to excel function in this release o...ESB.NET: ESBDeploy_7.0.27.0 (x64 and x86) [ESB.NET 7.0 RC1]: Release Details Changes Since Last Release (since 6.3.47.1) - Targets .NET Framework 4, Visual Studio.NET 2010, Workflow 4 - Flowchart workflow ada...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.1.1 beta 2 Released: Hi, This release contains the following enhancements: *ShowIndicator() and HideIndicator() function has been implemented in Chart. So now user wi...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.4 beta 2 Released: Hi, This release contains the following enhancements: *ShowIndicator() and HideIndicator() function has been implemented in Chart. So now user wi...FsCheck: A random testing framework: FsCheck 0.7: What to download? If you use F# April 2010 CTP with Visual Studio 2008 or Visual Studio 2010, either Source or Binaries will do. To open source in...Git Source Control Provider: V 0.5: For VS 2010 users, it is recommanded to install it within Visual Studio by selecting Tools | Extension Manager. Run Visual Studio. Go to Tools ...GPdotNET - Genetic Programming Tool: GPdotNETv0.95: 1. Localization support 2. Export functionality for GP Model with training and testing data. 3. Export GPModel with Testing and Training data. 4....JoshDOS: JoshDOS 1.1: 1.1 adds a toutorial of how to create new commands and of course, you need the COMSOS user kit or dev kit. Ver 1.1 also includes a demo called Gue...KIME Simio Extensions: KIME.SimioDebugStep: This simple Simio step allows you to debug any number of expressions from within the simulation run. The debug information is displayed using a mes...NginxTray: NginxTray 0.3 Beta 2: NginxTray 0.3 Beta 2NginxTray: NginxTray 0.5 Beta 3: NginxTray 0.5 Beta 3NginxTray: NginxTray 0.6 RC1: NginxTray 0.6 RC1Open Source PLM Activities: Prodeos_OC beta 1.0: The “Innovator – MS Office Connector” is a product developed by Prodeos (www.prodeos.com). It is a light connector made to facilitate the use of Mi...Paint.NET PSD Plugin: 1.5.1: Changes in this release: Bitmap-mode images can now be loaded. Thanks to dhnc for filing the bug. Plugin no longer crashes on files with user m...SharePoint 2010 Feature Upgrade Kit: 1.0.0.0: This release contains:- - Custom application page to manage the upgrade of Site and Web-scoped Features. To come in the next release: - Companio...SiteMap Utility for DNN Blog Module: Blog SiteMap Utility v01.00.01: This is the first public release of the SiteMap Utility for the core DotNetNuke® Blog Module. Please see the documentation on this site on how to...SqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: SqlDiffFramework 1.0.2.0: Maintenance Release Defect Fixes: Issue # 3: 3 Issue # 4: 4 Enhancements: About Box now displays regional and language settings in effect. SDF...SuperSocket: First release of SuperSocket: !First release of SuperSocketThe Fastcopy Helper: FastcopyHelper: Fastcopy Helper 2.0 This is a final one. You can use it on the way. In order to use it , you should have the .NET3.5 ! 此软件必须下载 .NET3.5平台，方可使用！TV Show Renamer: TV Show Renamer Beta 3: I found the bug the prevented it from closing correctly so I fixed it and had to release it right away. If anyone else finds any problems. contact me.UrzaGatherer: UrzaGatherer v2.0: UrzaGatherer is the first stable version. This release include UrzaBackgroundPictures.VisualStudio 2010 JavaScript Outlining: VisualStudion 2010 Javascript Outlining 1.0: Features Outlines JavaScript codeblock regions for the code placed between { }. Both places on a new line. Outlines custom regions defined by: //...Wouter's SharePoint Demo Land: Navigation Service with Proxy: A SharePoint 2010 Service Application that uses service proxies to relay commands to the actual service. The demo proxy makes use of in-memory comm...盘古分词-开源中文分词组件: V2.0.0.0: 进一步优化性能，分词速度达到将近 500K ，1.2.0.1 版本只有 320K 修改 PanGu.Lucene.Analyzer, 支持 Lucene.net 2.9 版本。 增加对字典中以数字开头的专业非中文词汇的识别 增加英文分词开关，权重由英文小写权重和英文词根权重两个参数来决定...Most Popular ProjectsCommunity Forums NNTP bridgeOutSyncASP.NET MVC Time PlannerNeatUploadMoonyDesk (windows desktop widgets)AgUnit - Silverlight unit testing with ReSharperViperWorks IgnitionASP.NET MVC ExtensionsAviva Solutions C# Coding GuidelinesMute4Most Active ProjectsCommunity Forums NNTP bridgeRawrpatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterGMap.NET - Great Maps for Windows Forms & PresentationN2 CMSStyleCopFarseer Physics Enginesmark C# LibraryMirror Testing System

  Read the article

• CloudBerry Online Backup 1.5 for Windows Home Server

  - by The Geek

  Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

  Read the article

• Building a Windows Phone 7 Twitter Application using Silverlight

  - by ScottGu

  On Monday I had the opportunity to present the MIX 2010 Day 1 Keynote in Las Vegas (you can watch a video of it here).  In the keynote I announced the release of the Silverlight 4 Release Candidate (we’ll ship the final release of it next month) and the VS 2010 RC tools for Silverlight 4.  I also had the chance to talk for the first time about how Silverlight and XNA can now be used to build Windows Phone 7 applications. During my talk I did two quick Windows Phone 7 coding demos using Silverlight – a quick “Hello World” application and a “Twitter” data-snacking application.  Both applications were easy to build and only took a few minutes to create on stage.  Below are the steps you can follow yourself to build them on your own machines as well. [Note: In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Building a “Hello World” Windows Phone 7 Application First make sure you’ve installed the Windows Phone Developer Tools CTP – this includes the Visual Studio 2010 Express for Windows Phone development tool (which will be free forever and is the only thing you need to develop and build Windows Phone 7 applications) as well as an add-on to the VS 2010 RC that enables phone development within the full VS 2010 as well. After you’ve downloaded and installed the Windows Phone Developer Tools CTP, launch the Visual Studio 2010 Express for Windows Phone that it installs or launch the VS 2010 RC (if you have it already installed), and then choose “File”->”New Project.”  Here, you’ll find the usual list of project template types along with a new category: “Silverlight for Windows Phone”. The first CTP offers two application project templates. The first is the “Windows Phone Application” template - this is what we’ll use for this example. The second is the “Windows Phone List Application” template - which provides the basic layout for a master-details phone application: After creating a new project, you’ll get a view of the design surface and markup. Notice that the design surface shows the phone UI, letting you easily see how your application will look while you develop. For those familiar with Visual Studio, you’ll also find the familiar ToolBox, Solution Explorer and Properties pane. For our HelloWorld application, we’ll start out by adding a TextBox and a Button from the Toolbox. Notice that you get the same design experience as you do for Silverlight on the web or desktop. You can easily resize, position and align your controls on the design surface. Changing properties is easy with the Properties pane. We’ll change the name of the TextBox that we added to username and change the page title text to “Hello world.” We’ll then write some code by double-clicking on the button and create an event handler in the code-behind file (MainPage.xaml.cs). We’ll start out by changing the title text of the application. The project template included this title as a TextBlock with the name textBlockListTitle (note that the current name incorrectly includes the word “list”; that will be fixed for the final release.)  As we write code against it we get intellisense showing the members available.  Below we’ll set the Text property of the title TextBlock to “Hello “ + the Text property of the TextBox username: We now have all the code necessary for a Hello World application.  We have two choices when it comes to deploying and running the application. We can either deploy to an actual device itself or use the built-in phone emulator: Because the phone emulator is actually the phone operating system running in a virtual machine, we’ll get the same experience developing in the emulator as on the device. For this sample, we’ll just press F5 to start the application with debugging using the emulator.  Once the phone operating system loads, the emulator will run the new “Hello world” application exactly as it would on the device: Notice that we can change several settings of the emulator experience with the emulator toolbar – which is a floating toolbar on the top right.  This includes the ability to re-size/zoom the emulator and two rotate buttons.  Zoom lets us zoom into even the smallest detail of the application: The orientation buttons allow us easily see what the application looks like in landscape mode (orientation change support is just built into the default template): Note that the emulator can be reused across F5 debug sessions - that means that we don’t have to start the emulator for every deployment. We’ve added a dialog that will help you from accidentally shutting down the emulator if you want to reuse it.  Launching an application on an already running emulator should only take ~3 seconds to deploy and run. Within our Hello World application we’ll click the “username” textbox to give it focus.  This will cause the software input panel (SIP) to open up automatically.  We can either type a message or – since we are using the emulator – just type in text.  Note that the emulator works with Windows 7 multi-touch so, if you have a touchscreen, you can see how interaction will feel on a device just by pressing the screen. We’ll enter “MIX 10” in the textbox and then click the button – this will cause the title to update to be “Hello MIX 10”: We provide the same Visual Studio experience when developing for the phone as other .NET applications. This means that we can set a breakpoint within the button event handler, press the button again and have it break within the debugger: Building a “Twitter” Windows Phone 7 Application using Silverlight Rather than just stop with “Hello World” let’s keep going and evolve it to be a basic Twitter client application. We’ll return to the design surface and add a ListBox, using the snaplines within the designer to fit it to the device screen and make the best use of phone screen real estate.  We’ll also rename the Button “Lookup”: We’ll then return to the Button event handler in Main.xaml.cs, and remove the original “Hello World” line of code and take advantage of the WebClient networking class to asynchronously download a Twitter feed. This takes three lines of code in total: (1) declaring and creating the WebClient, (2) attaching an event handler and then (3) calling the asynchronous DownloadStringAsync method. In the DownloadStringAsync call, we’ll pass a Twitter Uri plus a query string which pulls the text from the “username” TextBox. This feed will pull down the respective user’s most frequent posts in an XML format. When the call completes, the DownloadStringCompleted event is fired and our generated event handler twitter_DownloadStringCompleted will be called: The result returned from the Twitter call will come back in an XML based format.  To parse this we’ll use LINQ to XML. LINQ to XML lets us create simple queries for accessing data in an xml feed. To use this library, we’ll first need to add a reference to the assembly (right click on the References folder in the solution explorer and choose “Add Reference): We’ll then add a “using System.Xml.Linq” namespace reference at the top of the code-behind file at the top of Main.xaml.cs file: We’ll then add a simple helper class called TwitterItem to our project. TwitterItem has three string members – UserName, Message and ImageSource: We’ll then implement the twitter_DownloadStringCompleted event handler and use LINQ to XML to parse the returned XML string from Twitter.  What the query is doing is pulling out the three key pieces of information for each Twitter post from the username we passed as the query string. These are the ImageSource for their profile image, the Message of their tweet and their UserName. For each Tweet in the XML, we are creating a new TwitterItem in the IEnumerable<XElement> returned by the Linq query.  We then assign the generated TwitterItem sequence to the ListBox’s ItemsSource property: We’ll then do one more step to complete the application. In the Main.xaml file, we’ll add an ItemTemplate to the ListBox. For the demo, I used a simple template that uses databinding to show the user’s profile image, their tweet and their username. <ListBox Height="521" HorizonalAlignment="Left" Margin="0,131,0,0" Name="listBox1" VerticalAlignment="Top" Width="476"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" Height="132"> <Image Source="{Binding ImageSource}" Height="73" Width="73" VerticalAlignment="Top" Margin="0,10,8,0"/> <StackPanel Width="370"> <TextBlock Text="{Binding UserName}" Foreground="#FFC8AB14" FontSize="28" /> <TextBlock Text="{Binding Message}" TextWrapping="Wrap" FontSize="24" /> </StackPanel> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> Now, pressing F5 again, we are able to reuse the emulator and re-run the application. Once the application has launched, we can type in a Twitter username and press the  Button to see the results. Try my Twitter user name (scottgu) and you’ll get back a result of TwitterItems in the Listbox: Try using the mouse (or if you have a touchscreen device your finger) to scroll the items in the Listbox – you should find that they move very fast within the emulator.  This is because the emulator is hardware accelerated – and so gives you the same fast performance that you get on the actual phone hardware. Summary Silverlight and the VS 2010 Tools for Windows Phone (and the corresponding Expression Blend Tools for Windows Phone) make building Windows Phone applications both really easy and fun.  At MIX this week a number of great partners (including Netflix, FourSquare, Seesmic, Shazaam, Major League Soccer, Graphic.ly, Associated Press, Jackson Fish and more) showed off some killer application prototypes they’ve built over the last few weeks.  You can watch my full day 1 keynote to see them in action. I think they start to show some of the promise and potential of using Silverlight with Windows Phone 7.  I’ll be doing more blog posts in the weeks and months ahead that cover that more. Hope this helps, Scott

  Read the article

• Translating with Google Translate without API and C# Code

  - by Rick Strahl

  Some time back I created a data base driven ASP.NET Resource Provider along with some tools that make it easy to edit ASP.NET resources interactively in a Web application. One of the small helper features of the interactive resource admin tool is the ability to do simple translations using both Google Translate and Babelfish. Here's what this looks like in the resource administration form: When a resource is displayed, the user can click a Translate button and it will show the current resource text and then lets you set the source and target languages to translate. The Go button fires the translation for both Google and Babelfish and displays them - pressing use then changes the language of the resource to the target language and sets the resource value to the newly translated value. It's a nice and quick way to get a quick translation going. Ch… Ch… Changes Originally, both implementations basically did some screen scraping of the interactive Web sites and retrieved translated text out of result HTML. Screen scraping is always kind of an iffy proposition as content can be changed easily, but surprisingly that code worked for many years without fail. Recently however, Google at least changed their input pages to use AJAX callbacks and the page updates no longer worked the same way. End result: The Google translate code was broken. Now, Google does have an official API that you can access, but the API is being deprecated and you actually need to have an API key. Since I have public samples that people can download the API key is an issue if I want people to have the samples work out of the box - the only way I could even do this is by sharing my API key (not allowed).   However, after a bit of spelunking and playing around with the public site however I found that Google's interactive translate page actually makes callbacks using plain public access without an API key. By intercepting some of those AJAX calls and calling them directly from code I was able to get translation back up and working with minimal fuss, by parsing out the JSON these AJAX calls return. I don't think this particular Warning: This is hacky code, but after a fair bit of testing I found this to work very well with all sorts of languages and accented and escaped text etc. as long as you stick to small blocks of translated text. I thought I'd share it in case anybody else had been relying on a screen scraping mechanism like I did and needed a non-API based replacement. Here's the code: /// <summary> /// Translates a string into another language using Google's translate API JSON calls. /// <seealso>Class TranslationServices</seealso> /// </summary> /// <param name="Text">Text to translate. Should be a single word or sentence.</param> /// <param name="FromCulture"> /// Two letter culture (en of en-us, fr of fr-ca, de of de-ch) /// </param> /// <param name="ToCulture"> /// Two letter culture (as for FromCulture) /// </param> public string TranslateGoogle(string text, string fromCulture, string toCulture) { fromCulture = fromCulture.ToLower(); toCulture = toCulture.ToLower(); // normalize the culture in case something like en-us was passed // retrieve only en since Google doesn't support sub-locales string[] tokens = fromCulture.Split('-'); if (tokens.Length > 1) fromCulture = tokens[0]; // normalize ToCulture tokens = toCulture.Split('-'); if (tokens.Length > 1) toCulture = tokens[0]; string url = string.Format(@"http://translate.google.com/translate_a/t?client=j&text={0}&hl=en&sl={1}&tl={2}", HttpUtility.UrlEncode(text),fromCulture,toCulture); // Retrieve Translation with HTTP GET call string html = null; try { WebClient web = new WebClient(); // MUST add a known browser user agent or else response encoding doen't return UTF-8 (WTF Google?) web.Headers.Add(HttpRequestHeader.UserAgent, "Mozilla/5.0"); web.Headers.Add(HttpRequestHeader.AcceptCharset, "UTF-8"); // Make sure we have response encoding to UTF-8 web.Encoding = Encoding.UTF8; html = web.DownloadString(url); } catch (Exception ex) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.ConnectionFailed + ": " + ex.GetBaseException().Message; return null; } // Extract out trans":"...[Extracted]...","from the JSON string string result = Regex.Match(html, "trans\":(\".*?\"),\"", RegexOptions.IgnoreCase).Groups[1].Value; if (string.IsNullOrEmpty(result)) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.InvalidSearchResult; return null; } //return WebUtils.DecodeJsString(result); // Result is a JavaScript string so we need to deserialize it properly JavaScriptSerializer ser = new JavaScriptSerializer(); return ser.Deserialize(result, typeof(string)) as string; } To use the code is straightforward enough - simply provide a string to translate and a pair of two letter source and target languages: string result = service.TranslateGoogle("Life is great and one is spoiled when it goes on and on and on", "en", "de"); TestContext.WriteLine(result); How it works The code to translate is fairly straightforward. It basically uses the URL I snagged from the Google Translate Web Page slightly changed to return a JSON result (&client=j) instead of the funky nested PHP style JSON array that the default returns. The JSON result returned looks like this: {"sentences":[{"trans":"Das Leben ist großartig und man wird verwöhnt, wenn es weiter und weiter und weiter geht","orig":"Life is great and one is spoiled when it goes on and on and on","translit":"","src_translit":""}],"src":"en","server_time":24} I use WebClient to make an HTTP GET call to retrieve the JSON data and strip out part of the full JSON response that contains the actual translated text. Since this is a JSON response I need to deserialize the JSON string in case it's encoded (for upper/lower ASCII chars or quotes etc.). Couple of odd things to note in this code: First note that a valid user agent string must be passed (or at least one starting with a common browser identification - I use Mozilla/5.0). Without this Google doesn't encode the result with UTF-8, but instead uses a ISO encoding that .NET can't easily decode. Google seems to ignore the character set header and use the user agent instead which is - odd to say the least. The other is that the code returns a full JSON response. Rather than use the full response and decode it into a custom type that matches Google's result object, I just strip out the translated text. Yeah I know that's hacky but avoids an extra type and firing up the JavaScript deserializer. My internal version uses a small DecodeJsString() method to decode Javascript without the overhead of a full JSON parser. It's obviously not rocket science but as mentioned above what's nice about it is that it works without an Google API key. I can't vouch on how many translates you can do before there are cut offs but in my limited testing running a few stress tests on a Web server under load I didn't run into any problems. Limitations There are some restrictions with this: It only works on single words or single sentences - multiple sentences (delimited by .) are cut off at the ".". There is also a length limitation which appears to happen at around 220 characters or so. While that may not sound  like much for typical word or phrase translations this this is plenty of length. Use with a grain of salt - Google seems to be trying to limit their exposure to usage of the Translate APIs so this code might break in the future, but for now at least it works. FWIW, I also found that Google's translation is not as good as Babelfish, especially for contextual content like sentences. Google is faster, but Babelfish tends to give better translations. This is why in my translation tool I show both Google and Babelfish values retrieved. You can check out the code for this in the West Wind West Wind Web Toolkit's TranslationService.cs file which contains both the Google and Babelfish translation code pieces. Ironically the Babelfish code has been working forever using screen scraping and continues to work just fine today. I think it's a good idea to have multiple translation providers in case one is down or changes its format, hence the dual display in my translation form above. I hope this has been helpful to some of you - I've actually had many small uses for this code in a number of applications and it's sweet to have a simple routine that performs these operations for me easily. Resources Live Localization Sample Localization Resource Provider Administration form that includes options to translate text using Google and Babelfish interactively. TranslationService.cs The full source code in the West Wind West Wind Web Toolkit's Globalization library that contains the translation code. © Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  HTTP   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Wednesday, May 12, 2010

  CodePlex Daily Summary for Wednesday, May 12, 2010New ProjectsAMP (Adamo Media Player): AMP is a custom media player that specializes in large media collections! Change the way you manage your media!BoogiePartners: BoogiePartners provides a loose collection of utilities or extensions for Boogie and SpecSharp developers.C# Developer Utility Library: Collection of helpful code functions including zero-config rolling file logging, parameter validation, reflection & object construction, I18N count...Commerce Server 2009 Orders using Pipelines in a Console Application: Using Commerce Server 2009 outside of a Web Application this project show how to create dummy Orders using Pipelines in a NON WEB CONTEXT, an examp...CRM Queue Manager C#: CRM 4 Queue Manager written in C#. Based on the original VB.Net CRM Queue Manager with some changes, additions and feature changes. Converts emai...DbBuilder: This is a tool indended for creation of MS SQL database from scratch, incremental updates, management of redeployable objects, etc. using scripted ...DbNetData: A collection of cross vendor database interface classes for .NET written in C# providing a consistent and simplified way of accessing SQL Server,Or...Deploy Workflow Manager: Kick off a workflow associated with a SharePoint List on all list items at once. SharePoint Designer Workflows will also be included. This projec...DigiLini - digital on screen ruler: Handy desktop tool for everyone who does ever do something graphical on his computer. There is an sizable horizontal and vertial ruler. You can pos...Dynamic Grid Data Type for Umbraco: The Dynamic Grid Data Type for Umbraco is a custom ASCX/C# control that was created to store tabular data as an Umbraco "Data Type". There's an abi...FlashPlus: An extension for Google Chrome and a bookmarklet for Internet Explorer and Firefox, this project makes media content on browsers more usable. This...Flat Database: Simple project making it really quick and easy, to implement a simple flat-file database for an application.Flood Watch Spam Control: Flood watch is a C# based application meant to help prevent site black listings. This application monitors outbound smtp streams, if a stream excee...Gamebox: gameboxKill Bill: Kill Bill covers the areas of customers, suppliers, products, sales and administration divided into modules which together form the system for the ...KND Decoder: Der KND Decoder konvertiert die lästigen Zahlenwerte, in den Java Dateien vom Knuddels Applet, zu lesbaren Strings. Die neue dekodier Methode wurde...Moonbeam: D3D11 FrameworkSite Defender: Add-on for blogs or anywhere else there could be people spamming your website.sMODfix: -Stringzilla: A string formatting classes designed for .NET 4 to enable named string formatting and conditional string formatting options based upon bound data c...The CQRS Kitchen: The CQRS Kitchen is an example application build with Silverlight 4 that demonstrates how to implement a CQRS / Event Sourcing application with the...XELF Framework for XNA / .NET: XELF Framework for XNA / .NET 　XNA Game Studioおよび.NET Framework用のライブラリ・フレームワークとしてXELFが開発したC#ソースコードを含むプロジェクトです。 　現在は、「XELF.Framework」のWindows用XNA G...xxxxxxxxx: xxxxxxxNew ReleasesASP.NET MVC 2 - CommonLibrary.CMS: CommonLibrary CMS - Alpha: CommonLibrary CMSA simple yet powerful CMS system in ASP.NET MVC 2 using C# 3.5. ActiveRecord based support for Blogs, Widgets, Pages, Parts, Ev...ASP.NET MVC Extensions: v1.0 RTM: v1.0 RTMAWS SimpleDB Browser: Release 2: Miscellaneous fixes from the Alpha release. Built to work with the released version of the .Net Framework 4.0.BIDS Helper: 1.4.3.0: This release addresses the following issues: For some people the BIDS Helper extensions to the Project Properties page for the SSIS Deploy plugin w...Bojinx: Bojinx Core V4.5.13: Fixes / Enhancements: Sequencer now accepts Commands directly without using events. Command queue now accepts both events and commands EventBu...CF-Soft: TestCases_DROP1: TestCases_DROP1CodePlex Runtime Intelligence Integration: PreEmptive.Attributes distributable: Contains a signed redistributable version of the PreEmptive.Attributes.dll library that non .NET 4 applications can use support in-code instrumenta...Convection Game Engine (Basic Edition): Convection Basic (44772): Compiled version of Convection Basic change set 44772.CRM Queue Manager C#: Initial release: Initial release of the CRM Queue Manager in C#. Release includes both the installer as well as the latest source code in zippped format. Running...DbNetData: DbNetData.1.0: Initial releaseDigiLini - digital on screen ruler: DigiLini 1.0: First stable version.Facturator - Create invoices easy and fast: Facturator.zip: current stable versionFlat Database: Initial Release: This is the working initial release of FlatDBKharaPOS: MSDN Magazine Sample: This is the release that supports the MSDN magazine article "Enterprise Patterns with WCF RIA Services. Some of the project was affected by the upg...Let's Up: 1.1 (Build 100511): - Add short and long break feature.Mesopotamia Experiment: Mesopotamia 1.2.88: Primarly bug fixes... Bug Fixes - fixed bug in synapse mutating whereby new ones were of one side only eg, source or target - fixed bug in screen ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.123: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.123: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version makes...Over Store: OverStore 1.18.0.0: Version number is increased. New callback events added: Persisting and Persisted, which are raised on actually writing object data into the stora...Reusable Library: V1.0.7: A collection of reusable abstractions for enterprise application developerReusable Library Demo: V1.0.5: A demonstration of reusable abstractions for enterprise application developerRuntime Intelligence Endpoint Starter Kit: Runtime Intelligence Endpoint Starter Kit 20100511: Added crossdomain policy files so Silverlight applications can send usage data from anywhere.Scorm2CC: SCORM2CC Release 0.12.0.58711 net-2.0 Alpha: SCORM2CC Release 0.12.0.58711 net-2.0 AlphaShake - C# Make: Shake v0.1.14: Updated API to match with the current documentation.SharePoint LogViewer: SharePoint Log Viewer 2.6: This is a maintenance release. It has bug several fixes.Site Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): v1.4: As 1.3 with the following changes Addition of a 'Site Data' webpart Site Directory can now be a site collection root or sub-site Scan job now ...sMODfix: sMODfix v1.0: Basic Versionsmtp4dev: smtp4dev 2.0: Smtp4dev 2.0 is powered by a completely re-written server component and now offers SSL/TLS and AUTH support.SocialScapes: SocialScapes Sidebar 1.0: The SocialScapes Sidebar is the first release of the new SocialScapes suite. There will be more modules to come along with a complete data aggrega...SSIS Multiple Hash: Multiple Hash V1.2: This is version 1.2 of the Multiple Hash SSIS Component. It supports SQL 2005 and SQL 2008, although you have to download the correct install pack...Surfium: Beta build: Somehow testedTerminals: Terminals 1.9a - RDP6 Support: The major change in this release is that Terminals has been upgraded to require RDP Client 6 to be installed for creating RDP connections. Backward...TFS Compare: Release 3.0: This release provides a new feature - the ability to navigate back and forth between document differences. Also, this release provides support for...VCC: Latest build, v2.1.30511.0: Automatic drop of latest buildyoutubeFisher: youtubeFisher v2.0: What's new new method of youtube parameters capturing HD 720p video support full-HD 1080p video support add Cancel option to stop file downl...Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryMirror Testing SystemRawrThe Information Literacy Education Learning Environment (ILE)Caliburn: An Application Framework for WPF and SilverlightwhiteBlogEngine.NETPHPExceljQuery Library for SharePoint Web ServicesTweetSharp

  Read the article

• CodePlex Daily Summary for Thursday, March 04, 2010

  CodePlex Daily Summary for Thursday, March 04, 2010New ProjectsAcPrac: A educational program designed to run on Windows. It is fully customizable. It is developed in C# 2008.argo: Linguistic Tool Camelot: A simple utility for testing cross site data queries in SharePointdelta: Delta is a difference tool for large files. Delta will have several clients, including AJAX and Silverlight. You can view differences in a scroll...EF Dorsal: A dorsal spine for Entity Framework based project. This code generator provides a powerfull Business Layer with almost all high important best p...Excel formatting: Excel formatting projectEyes Recognition: eye recognitionGameOfLife: The Game of Life is a the best example of a cellular automaton. It's developed in C#, SilverLight.GKO Libraries: .NET tool libraries written in C# that we have used in our projectsHello Demo: A simple Hello World application, used to demonstrate access to CodePlex using Team Explorerjog.Portal: jogportal lays the foundation for an extensible portal solution leveraging the latest technology including linq and silver lightKM Brasil: k-meleon, km, gecko, brasil, browser, web, web browser, navegador, navegação, kmeleon, k meleonLost in Translation: Ever find yourself in a foreign country eager (or clueless) to what is written on a shop sign or restaurant menu? With your trusty phone, its came...Machine Learning for .NET: Machine Learning Library for .NET. Initial inclusions will be binary and multi-class classification as well as standard clustering algorithms.Maito: Iron Kingdoms Name GeneratorManPowerEngine: ManPowerEngine is a Silverlight 2D Game Engine. It has an game application framework and supports game object hierarchy management, 2D physics simu...Marvin's Arena: Marvin's Arena is a free and entertaining programming game. The game is designed to easily learn programming in any .NET compatible language. It is...MultiMediaPlayer: 整合我们的内容NCacheD - A Simple Distributed .NET Cache using the TPL and WCF: NCacheD is a simple distributed cache system written in .NET. NCacheD offers functionality similar to that of MemcacheD but scaled back. NCacheD ...NDAP: OPeNDAP is a client/server system for making local scientific data accessible to remote locations without regard to the local or remote storage for...Open Guide CMS: Open Guide makes your traveling through city more adventurous, mode educational and more funny. You can support us by lines of code, by interesti...Rollback - A social backup tool.: Rollback is a simple and intuitive social backup application. You can create multiple backup jobs with a few mouse clicks and even schedule it to ...sELedit: An editor for elements.data file of the popular MMORPG Perfect World.SharePoint Theme Applicator: SharePoint Theme Applicator will give SharePoint administrators the ability to apply a theme accross a whole web application (i.e. apply a theme to...sPATCH: ! sPATCH - Perfect World Client Autopatcher This beta patcher is an alternative to the default perfect world patcher. It offers easy client patc...Wiggle: A-life investigation. Let's make little squirmies!WPFSLBlendModeFx: A blend mode library for WPF & Silverlight.休息提醒: 程序员们，尤其是像我这样对程序痴狂的程序员们。一旦研究起自己感兴趣的程序时，觉得上厕所都是浪费时间。 这个程序是在设定的时间后锁定计算机或关闭显示器，从而从某种程度强迫程序员们去休息New ReleasesAMFParser: 1.1.0: Add handling of DSK object when using BlazeDS Add handling of string references Add handling of DateTime values Correct handling of Double values B...Camelot: Camelot 0.1 Alpha: Early release: 1) Query by content type, optionally list or base template 2) Query by list or base templateDictionary Translator for Umbraco: Dictionary Translator 1.1: This is a minor release that fixes a bug that Thomas Hohler found on the first day of release This package is to be used with the ASP.NET open sou...Dynamic Configuration: Sample Application Release 1: These binaries demonstrate the effect of using DynamicConfigurationManager. The source-code for these binaries is available in the 'Source Code' t...EF Dorsal: EFDorsal v0.3b: Second real version. This version add suport to types and entity sets in tree-view.Enterprise Library Extensions: Release 1.0: This is the initial release of the package. The release will contain one feature only, as being able to deploy the project itself it the milestone ...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.0.4 beta 2 Released: Hi, Today’s release contains fix for the following issues: * In WPF application chart was throwing exception as VisualStateGroup was not foun...GameOfLife: Game of life: First release of the game. PublishedGameStore League Manager: League Manager 1.0 release 2.: Fixes crashing bugs from the first release. To use: 1. Install SQL Server Express 2005 http://www.microsoft.com/Sqlserver/2005/en/us/express-down....Marvin's Arena: Version 0.0.5.0: Code Editor (development of robots without Visual Studio - no debugging) * Rounds * 3D Battle Engine: Skybox * 3D Battle Engine: Robot...Morphfolia - ASP.NET CMS and Framework: Morphfolia v2.4.1.1: Morphfolia v2.4.1.1 - New Release Includes: Better support for browsers other than IE (Chrome, Firefox, Safari - all tested on Windows) Supports ...NCacheD - A Simple Distributed .NET Cache using the TPL and WCF: NCacheD Version 1: Getting Started To get up and running, open two instances of Visual Studio 2010. In one window open the NCacheD client solution and then open the ...Papercut: Papercut 2010-3-3: This release includes a few bug fixes and updates, several of which were contributed patches (thanks!). Feature: Added support for embedded images...PE-file Reader Writer API (PERWAPI): PERWAPI-1.1.4: Perwapi version 1.1.4 is the complete distribution package. It contains Binary files, pdb files and xml files for the PERWAPI and SymbolRW compone...Prolog.NET: Prolog.NET 1.0 Beta 1.2: Installer includes: primary Prolog.NET assembly Prolog.NET Workbench PrologTest console application all required dependencies Beta 1.2 in...Protoforma | Tactica Adversa: Skilful 0.2.4.320: BetaRoTwee: RoTwee 6.1.0.0: 16604 "Post playing tune feature" is added. Using this new feature, you can tweet tune playing in iTunes. 16625 Error processing for network error...sELedit: sELedit v1.0: -SharePoint 2007 Deployment Wizard: Support for SharePoint Server and Foundation 2010: This release encompasses the supported install paths for the default install of SPS 2010 (the 14 hive). All three versions are now supported (60 h...SharePoint Theme Applicator: SharePoint Theme Applicator: SharePoint Theme Applicator was built using C# and WPF, it includes the following features: Provides the total number of site collections in the g...Shinkansen: compress, crunch, combine, and cache JavaScript and CSS: Shinkansen 1.0.0.030310: Build 1.0.0.030310, binaries onlysPATCH: sPatcher v0.8: sPatch - Server Example *Contains a sample Patch that "downgrades" PWI 1.4.2 Client to an 1.3.6 ClientTFS Code Comment Checking Policy (CCCP): CCCP 3.0 for VSTS 2008 SP1: This release includes NRefactory 3.2.0.5571 and is built against VSTS 2008 SP1 (.NET 3.5 is required). New: horizontal scrollbar in listboxes for ...TortoiseHg: Beta for TortoiseHg 1.0 (0.9.31254): Please backup your user Mercurial.ini file and then uninstall any 0.9.X release before installing Use the x86 msi file for 32 bit platforms and th...TwitEclipseAPI: TwitEclipseAPI 0.9: 0.9 Release of TwitEclipseAPI Moved API calls to the api.Twitter.com URL. Moved API calls to the versioning API. Now uses the increased Rate Limit...TwitterVB - A .NET Twitter Library: TwitterVB-2.3: Patch 5151: Added BlockedUsers function to get a page other then the first Patch 5420: The ListMembers function will now return more then just th...休息提醒: 初始版本: 初始版本Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETLiveUpload to FacebookMost Active ProjectsRawrBlogEngine.NETMapWindow GISpatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesMDT Web FrontEndsvn2tfsDiffPlex - a .NET Diff GeneratorIonics Isapi Rewrite FilterFarseer Physics Engine

  Read the article

• CodePlex Daily Summary for Tuesday, December 14, 2010

  CodePlex Daily Summary for Tuesday, December 14, 2010Popular ReleasesFlickrNet API Library: 3.1.4000: Newest release. Now contains dedicated Windows Phone 7 DLL as well as all previous DLLs. Also contains Windows Help file documentation now as standard.mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010SuperWebSocket: SuperWebSocket Drop 2: Changes: based on SuperSocket 1.3 supported sub protocol supported SSL/TLS encryption (wss) in Sync socket mode fixed some data communication bugsSSH.NET Library: 2010.12.13: Fixes SFTP issue when you try to uploaded or download multiple files simultaneously. Usage example can be found hereRequest Tracker Data Access: 1.0.0.0: First releaseSQL Monitor: SQL Monitor 2.4: 1. auto adjust datagrids in query 2. disable activities related commands until activities tab is active.SuperSocket, an extensible socket application framework: SuperSocket 1.3 beta 1: SuperSocket 1.3 is built on .NET 4.0 framework. Bug fixes: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration value Third-part library upgrades: upgraded SuperSocket to .NET 4.0 upgraded EntLib 4.1 to 5.0 New features: supported UDP socket support custom protocol (can support binary protocol and other complecate...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.SwapWin: SwapWin 0.2: Updates: Bring all windows that are swapped to foreground. Make the window sent to primary screen active.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework（??） 2010?12??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, WinForm, Silverlight????12?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.New ProjectsAugmented Reality system in Soccer video: Augmented reality system and camera calibration system in soccer videos based on homography and vanishing points. Code generated with Visual C++ (best compiler is .net)Database Schema Provider: Database Schema Provider gets a database schema in unified format independent on the type of database. It uses ADO.NET data provider for Entity Framework. Dicke Bertha: Many many cool features... DNN Bookmark: DNN Bookmarks is a DNN module that aggregates the most popular social bookmarking tools and also allows you to bookmark your DNN web siteDough: Dough is a UI starter kit built using ASP.Net MVC and ExtJS. It's name comes from the concept of Amish friendship bread, a type of bread or cake made from a sourdough starter that is often shared in a manner similar to a chain letter.Garra - Gerenciador Financeiro: Garra é um sistema completo de controle financeiro: contas a pagar, contas a receber, investimentos, etc...ghcwp7: ghcwp7Hackathon - DotNetNuke Razor User Locator: The DotNetNuke Razor User Locator module demonstrates how Razor can be used to author DNN modules. This module shows where recent users to a web site came from based on their IP address. Hackathon. DotNetNuke Razor. Flickr Badge: Flickr badge desktop module allows you to display image thumbnails from Flickr and preview them inside DotNetNuke or on Flickr (controlled by module settings). Image thumbnails can be loaded by tag, user id, user group id, user set id and more.Hackathon: Razor Youtube Gallery: This is a DotNetNuke module which allows a website admin to add several relevant Youtube videos to a pane. The end user watches the selected Youtube video play, while scrolling through thumbnails of other videos to play those without refreshing the page. jQuery UI MVC3 Demo: Demo and possibly a skeleton for using jQuery UI in MVC3 (currently RC2).Microsoft Office Communicator History manager: Needs to save conversation history just on the local workstation (folder) then application could redstore it and show in simple window (mode) or user could open folder and lock on it manuallyMSTest Extensions - Msbuild: This project contains various msbuild tasks that extend helps with test execution using Mcrosoft testing frameworkRayCharlesTracer: this is a scholar project for a raytracer.Refunctor: F# interactive inside Reflector.Request Tracker Data Access: Best Practical RT (Request Tracker) data access .NET library for REST interface.SurfzApp: An application that does data mining on web resources of interest for Swedish windsurfers...Tesseract Solutions Corp. Data Access Base: Tesseract Data Access speeds up data access in .Net projects. Developed in C# .Net 4. It is a C#, class based ORM.TimBazinga EVoting: Undergrad project - designing an e-voting software system.Tiny Library CQRS: Tiny Library CQRS is a small demonstration project which demonstrates the concept of Domain Driven Design and the CQRS architecture pattern. This project relies on the Apworks DDD framework.Toptoys: toptoysWebGroup: WebGroup makes it easier for your website members to comunicate online. It work like Web IM + Forum + Twitter. It can be easily used in your current project. Developed in C#.WpfCustomChromeLibrary: WpfCustomChromeLibrary makes it easier to create WPF applications with custom chrome and caption buttons (min/max/close). You'll no longer have to do all the dirty work yourself in each application where you want a custom chrome. It's developed in XAML and C#.

  Read the article

• Simple Branching and Merging with SVN

  Its a good idea not to do too much work without checking something into source control.  By too much work I mean typically on the order of a couple of hours at most, and certainly its a good practice to check in anything you have before you leave the office for the day.  But what if your changes break the build (on the build server you do have a build server dont you?) or would cause problems for others on your team if they get the latest code?  The solution with Subversion is branching and merging (incidentally, if youre using Microsoft Visual Studio Team System, you can shelve your changes and share shelvesets with others, which accomplishes many of the same things as branching and merging, but is a bit simpler to do). Getting Started Im going to assume you have Subversion installed along with the nearly ubiquitous client, TortoiseSVN.  See my previous post on installing SVN server if you want to get it set up real quick (you can put it on your workstation/laptop just to learn how it works easily enough). Overview When you know you are going to be working on something that you wont be able to check in quickly, its a good idea to start a branch.  Its also perfectly fine to create the branch after-the-fact (have you ever started something thinking it would be an hour and 4 hours later realized you were nowhere near done?).  In any event, the first thing you need to do is create a branch.  A branch is simply a copy of the current trunk (a typical subversion setup has root directories called trunk, tags, and branches its a good idea to keep this and to put your branches in the branches folder).  Once you have a new branch, you need to switch your working copy so that it is bound to your branch.  As you work,  you may want to merge in changes that are happening in the trunk to your branch, and ultimately when you are done youll want to merge your branch back into the trunk.  When done, you can delete your branch (or not, but it may add clutter).  To sum up: Create a new branch Switch your local working copy to the new branch Develop in the branch (commit changes, etc.) Merge changes from trunk into your branch Merge changes from branch into trunk Delete the branch Create a new branch From the root of your repository, right-click and select TortoiseSVN > Branch/tag as shown at right (click to enlarge).  This will bring up the Copy (Branch / Tag) interface.  By default the From WC at URL: should be pointing at the trunk of your repository.  I recommend (after ensuring that you have the latest version) that you choose to make the copy from the HEAD revision in the repository (the first radio button).  In the To URL: textbox, you should change the URL from /trunk to /branches/NAME_OF_BRANCH.  You can name the branch anything you like, but its often useful to give it your name (if its just for your use) or some useful information (such as a datestamp or a bug/issue ID from that it relates to, or perhaps just the name of the feature you are adding. When youre done with that, enter in a log message for your new branch.  If you want to immediately switch your local working copy to the new branch/tag, check the box at the bottom of the dialog (Switch working copy to new branch/tag).  You can see an example at right. Assuming everything works, you should very quickly see a window telling you the Copy finished, like the one shown below: Switch Local Working Copy to New Branch If you followed the instructions above and checked the box when you created your branch, you dont need to do this step.  However, if you have a branch that already exists and you would like to switch over to working on it, you can do so by using the Switch command.  Youll find it in the explorer context menu under TortoiseSVN > Switch: This brings up a dialog that shows you your current binding, and lets you enter in a new URL to switch to: In the screenshot above, you can see that Im currently bound to a branch, and so I could switch back to the trunk or to another branch.  If youre not sure what to enter here, you can click the [] next to the URL textbox to explore your repository and find the appropriate root URL to use.  Also, the dropdown will show you URLs that might be a good fit (such as the trunk of the current repository). Develop in the Branch Once you have created a branch and switched your working copy to use it,  you can make changes and Commit them as usual.  Your commits are now going into the branch, so they wont impact other users or the build server that are working off of the trunk (or their own branches).  In theory you can keep on doing this forever, but practically its a good idea to periodically merge the trunk into your branch, and/or keep your branches short-lived and merge them back into the trunk before they get too far out of sync. Merge Changes from Trunk into your Branch Once you have been working in a branch for a little while, change to the trunk will have occurred that youll want to merge into your branch.  Its much safer and easier to integrate changes in small increments than to wait for weeks or months and then try to merge in two very different codebases.  To perform the merge, simply go to the root of your branch working copy and right click, select TortoiseSVN->Merge.  Youll be presented with this dialog: In this case you want to leave the default setting, Merge a range of revisions.  Click Next.  Now choose the URL to merge from.  You should select the trunk of your current repository (which should be in the dropdownlist, or you can click the [] to browse your repository for the correct URL).  You can leave everything else blank since you want to merge everything: Click Next.  Again you can leave the default settings.  If you want to do something more granular than everything in the trunk, you can select a different Merge depth, to include merging just one item in the tree.  You can also perform a Test merge to see what changes will take place before you click Merge (which is often a good idea).  Heres what the dialog should look like before you click Merge: After clicking Merge (or Test merge) you should see a confirmation like this (it will say Test Only in the title if you click Test merge): Now you should build your solution, run all of your tests, and verify that your branch still works the way it should, given the updates that youve just integrated from the trunk.  Once everything works, Commit your changes, and then continue with your work on the branch.  Note that until you commit, nothing has actually changed in your branch on the server.  Other team members who may also be working in this branch wont be impacted, etc.  The Merge is purely a client-side operation until you perform a Commit. In a more real-world scenario, you may have conflicts.  When you do, youll be presented with a dialog like this one: Its up to you which option you want to go with.  The more frequently you Merge, the fewer of these youll have to deal with.  Also, be very sure that youre merging the right folders together.  If you try and merge your trunk with some subfolder in your branchs structure, youll end up with all kinds of conflicts and problems.  Fortunately, theyre only on your working copy (unless you commit them!) but if you see something like that, be sure to doublecheck your URL and your local file location. Merge Your Branch Back Into Trunk When youre done working in your branch, its time to pull it back into the trunk.  The first thing you should do is follow the previous steps instructions for merging the latest from the trunk into your branch.  This lets you ensure that what you have in your branch works correctly with the current trunk.  Once youve done that and committed your changes to your branch, youre ready to proceed with this step. Once youre confident your branch is good to go, you should go to its root folder and select TortoiseSVN->Merge (as above) from the explorer right-click menu.  This time, select Reintegrate a branch as shown below: Click Next.  Youll want it to merge with the trunk, which should be the default: Click Next. Leave the default settings: Click Test merge to see a test, and then if all looks good, click Merge.  Note that if you havent checked in your working copy changes, youll see something like this: If on the other hand things are successful: After this step, its likely you are finished working in your branch.  Dont forget to use the ToroiseSVN->Switch command to change your working copy back to the trunk. Delete the Branch You dont have to delete the branch, but over time your branches area of your repository will get cluttered, and in any event if theyre not actively being worked on the branches are just taking up space and adding to later confusion.  Keeping your branches limited to things youre actively working on is simply a good habit to get into, just like making sure your codebase itself remains tidy and not filled with old commented out bits of code. To delete the branch after youre finished with it, the simplest thing to do is choose TortoiseSVN->Repo Browser.  From there, assuming you did this from your branch, it should already be highlighted.  In any event, navigate to your branch in the treeview on the left, and then right-click and select Delete.  Enter a log message if youd like: Click OK, and its gone.  Dont be too afraid of this, though.  You can still get to the files by viewing the log for branches, and selecting a previous revision (anything before the delete action): If for some reason you needed something that was previously in this branch, you could easily get back to any changeset you checked in, so you should have absolutely no fear when it comes to deleting branches youre done with.   Resources If youre using Eclipse, theres a nice write-up of the steps required by Zach Cox that I found helpful here. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >