Search Results

Search found 12437 results on 498 pages for 'normal mapping'.

Page 269/498 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Radeon HD 5770 - DisplayPort Problem

  - by Nick Schmit

  I am trying to set up 3 monitors with the Radeon HD 5770 I recieved a few days ago. I have read that I can use 2 DVI ports and an active DisplayPort adapter for a third DVI monitor. I have purchased this adapter: http://www.accellcables.com/products/DisplayPort/DP/dp_dvid.htm I have the two normal DVI monitors working, but when I try to extend the display to the third, I get a message saying the system has detected a problem with the connection through the display port which may limit resolution/refresh rate. I know that all the cables are fine, I have replaced the adapter, the monitors all work, I have tried different monitors through the adapter, and even nothing but the adapter, but I cannot get any monitor to work using it. I am trying to use 2 Dell monitors and an Acer. Have I overlooked something? Is there a compatibiliy issue I missed? Any suggestions as to what I could try? Thanks in advance.

  Read the article

• Installing router - failed to verify router settings

  - by Andi

  I'm trying to install a TP-Link wireless router. I am using a modem an have a PPPoE connection. I connected the router to the computer and the modem, but in the last step of the Easy Setup it says " Failed to verify router settings. 1. Please check the WAN connection type and parameters. 2. Please check your connectivity and retry." The internet works fine if i connect the modem directly to the computer. When I connect the computer to the router, the wireless network is detected by other devices, but cannot be accessed. I accessed the router settings, and everything seems normal, except that it just says "Connecting...". It never manages to connect to the internet. I tried restarting the router and several walkthroughs on the web, but I couldn't get it to work.

  Read the article

• How to configure squid for retrieving (and caching) directly my static resources?

  - by fabien7474

  I have an Apache/Tomcat/Spring tc Server running on CentOS EC2 VM. I would like to install squid on the same machine as a proxy for retrieving (directly i.e. without forwarding the request to Apache/Tomcat) and caching static content ONLY identified by URIs : /images, /css or /js. Other URIs should be forwarded to the normal Web Server and not cached. Since I am a newbie, I didn't find from squid documentation how to configure squid for this desired behavior (and if it is even possible). Could you please help me and tell me how should I configure squid for this purpose? Thank you.

  Read the article

• tcsh `cd` always issues a printout of `$PWD`. How do I disable this?

  - by Ross Rogers

  Someone in IT thought it would be a good idea to modify the default behavior of the command cd in our tcsh environment. As of Monday the "upgraded" version of cd always prints out $PWD after it navigates to the new directory. e.g. % cd ~/ Directory: /nfs/pdx/home/rbroger1 which cd yields no results so it isn't being alias'd. Is there some environment variable or normal tcsh variable that is being set in our setup scripts to produce this output? I don't want to change all my scripts to use a wrappered or alias'd cd. I just want plain ol' cd.

  Read the article

• How to remove a virus that trigger the internet explorer every some minutes?

  - by Hoang

  Some days ago, I got a file in Windows Live Messenger by an account of my friend, I thought it was a normal file because he normally sent me some files as well. But this time, I had no luck, he got the virus from someone else. I don't know what happens in my computer excepts that my computer hard disk runs as mad and every some minutes it trigger the internet explorer to launch some ads page, includes doubleclick, cam4, motor, etc.... How do I remove this virus from my computer? I don't have any virus program installed yet. My computer os: Windows Vista, the Windows Firewall is disabled somehow that I could not reenable it.

  Read the article

• Fingerprint of PEM ssh key

  - by Unknown

  I have a PEM file which I add to a running ssh-agent: $ file query.pem query.pem: PEM RSA private key $ ssh-add ./query.pem Identity added: ./query.pem (./query.pem) $ ssh-add -l | grep query 2048 ef:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX ./query.pem (RSA) My question is how I can get the key fingerprint I see in ssh-agent directly from the file. I know ssh-keygen -l -f some_key works for "normal" ssh keys, but not for PEM files. If I try ssh-keygen on the .pem file, I get: $ ssh-keygen -l -f ./query.pem key_read: uudecode PRIVATE KEY----- failed key_read: uudecode PRIVATE KEY----- failed ./query.pem is not a public key file. This key starts with: -----BEGIN RSA PRIVATE KEY----- MIIEp.... etc. as opposed to a "regular" private key, which looks like: -----BEGIN RSA PRIVATE KEY----- Proc-Type: 4,ENCRYPTED DEK-Info: AES-128-CBC,E15F2.... etc.

  Read the article

• How can I be sure that the motherboard is dead and it's not another issue?

  - by Peter

  So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

  Read the article

• Changing the placement of the left border of tables in Word

  - by mkva

  Is it possible to have tables in Word such that the border lines align with the text outside the table? In MS Word, the left-side (and also the right-side) border is by default not aligned with the rest of the text on a page. It's actually the text in the first column of a table that is aligned with the text outside the table. And the table border is a little bit to the left. I find this layout quite a bit annoying, as I don't want to have any elements on a page outside the range that is used by normal text. I know that I can change the column delimiters manually (via the ruler). I'm looking for some more automatic way like setting the defaults for the whole document or such.

  Read the article

• Make own dial-up ISP using broadband connection [on hold]

  - by SkylarMT

  So, I see no reason why this wouldn't be possible. I have a Linux server (a Raspberry Pi to be exact) connected via Ethernet to a broadband ISP. I want to be able to dial a number, have it go through the normal telephone network, onto the Internet via a VoIP provider (I know you can call a Skype user from a landline), to my Raspberry Pi, and then have the Pi connect me to the Internet. I've found guides on making your own ISP, but they all involve a dedicated phone line on the server end. Is there a way to do this with no modem on the server end? I live in an area with a lot of people still on dialup, and if I pull this off I could make some extra money. Thanks!

  Read the article

• Is there a command line two-factor authentication verification code generator?

  - by dan

  I manage a server with two-factor authentication. I have to use the Google Authenticator iPhone app to get the 6-digit verification code to enter after entering the normal server password. The setup is described here: http://www.mnxsolutions.com/security/two-factor-ssh-with-google-authenticator.html I would like a way to get the verification code using just my laptop and not from my iphone. There must be a way to seed a command line app that generates these verification codes and gives you the code for the current 30-second window. Is there a program that can do this?

  Read the article

• gigabit network with adsl modem

  - by user51006

  Hi, i would like to build a gigabit network to connect the different computers at my home. I already have an 100Mb adsl router/modem but i have an hard time to find a 1000Mb one, so i came up with the idea of using a normal 1000Mb router or switch to put between the adsl modem and the computers. So i only use the adsl modem to connect to the internet and the gigabit router as dhcp to connect the different computers. But to get to the question. Will the 100Mb adsl router slow down my network? Will data travel like pc gigabit router computer or pc gigabit router adsl router gigabit router pc. My gut says it will go like in the first option but i have seen network hardware do some weird stuff. What do you think?

  Read the article

• Switches with 802.1x "supplicant timeout" feature?

  - by chris

  I'm looking for a complete list of switches which will allow 802.1x and normal (non-supplicant) enabled hosts to connect to the same ports on a switch. This is useful for areas where there are semi-open ports such as a lobby area or a library where corporate and guest users may use the same ports but you want them to have different access profiles and where it isn't expected that guests would have 802.1x configured on their system. For instance, Enterasys and Extreme Networks both have a feature where if the switch doesn't see an EAPOL packet from the client in a certain amount of time, it puts the port into a "guest" VLAN; if it sees an 802.1x supplicant, it tries to authenticate the user via 802.1x and if they succeed, it does what the radius server tells it to do with that port (IE put the port into a certain VLAN, apply certain ACLs, etc) Do other vendors have this sort of feature, or is it expected that a switch will do both 802.1x and MAC authentication, and the "supplicant timeout" feature is implemented with a blanket allow on the MAC authentication?

  Read the article

• Nginx request forking

  - by Adam

  Hi, I'm wondering if nginx can "fork" a request. Let's imagine config: upstream backend { server localhost:8080; ... more servers here } server { location /myloc { FORK-REQUEST http://my-other-url:3135/something proxy_pass http://backend; } } I would like nginx to send a copy of request to the url specified by FORK-REQUEST and after that to load balance it with backend servers and return the response to the client. As I don't need the response from FORK-REQUEST it would be best if this request was async so normal prcessing doesn't have to wait. Is a scenario like this possible?

  Read the article

• Would Firefox 3.5.8 freezing on Windows 7 indicate a problem with Windows WiFi driver or with Firefo

  - by Krystof

  I recently installed Windows 7 in spite of a lack of driver support from my laptop manufacturer but somehow Windows 7 seemed to be able to figure out what was needed - including the WiFi driver. But after I installed Firefox 3.5.8, I found that Firefox freezes frequently. When this happens the whole Windows interface turns sort of whitish like it's disabling interaction and, indeed, you cannot interact with anything in Windows. After a few minutes the freeze resolves itself and everything returns to normal. I scanned for viruses and ran the defragenter but nothing seems unusual besides these freezes. Anyone have any ideas what might be causing it and whether it's likely a problem with Firefox or with Windows - or perhaps with the hardware or drivers (WiFi driver?)?

  Read the article

• HAProxy NGInx SSL setup

  - by Niclas

  I've been looking around different setups for a server cluster supporting SSL and I would like to benchmark my idea with you. Requirements: All servers in the cluster should be under the same full domain name. (http and https) Routing to subsystems is done on URI matching in HA proxy. All URIs have support for SSL support. Wish: Centralizing routing rules ---<----http-----<-- | | Inet -->HA--+---https--->NGInx_SSL_1..N | | +---http---> Apache_1..M | +---http---> NodeJS Idea: Configure HA to route all SSL traffic (mode=tcp,algorithm=Source) to an NGInx cluster turning https traffic into http. Re-pass the http traffic from NGInx to the HA for normal load-balancing which performs load balancing based on HA config. My question is simply: Is this the best way to to configure based on requirements above?

  Read the article

• How to type a small fraction in Word 2007 equation editor?

  - by Timwi

  In Word 2007’s equation editor, I can enter “1/2” and I will get a properly formatted fraction. However, there is another kind of fraction that uses a smaller font size. How do I type that one using the keyboard alone? I notice that if I switch to linear mode, I get a small box displayed: Using the clipboard, I find that this is the same box (U+25A1) that I also get if I type “\box”. Despite, typing “\box(1/2)” still turns into a normal-size fraction and not the small fraction. How do I type the small fraction?

  Read the article

• Network connection through a wall

  - by BCS

  I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware? The situation is that I'm moving into a new place (that I'm renting, so I can't do any cutting) and the POP is in one room and I have all the equipment is in another room.

  Read the article

• Is it a good idea to have the operating system on a solid state drive?

  - by Kenji Kina

  There is something I don't quite understand. I know a SSD helps with OS load times, but I'm not sure if all this boost is only noticeable/interesting when booting, or gives an all around considerably better experience thereafter. I am interested in having a quick and responsive environment after booting, which leads me to think that it'd be better to spend the SSD capacity in my most used apps (and the page file? Another inside question) and not the OS itself. This, of course, means that I don't know just how much the OS reads/writes its files during normal usage. So, how good an idea is it to dump the whole 20GB+ of Windows 7 OS into the SSD (considering the hefty price per GB of SSD capacity) if I can put up with the usual hard disk boot times? Would I be missing on a lot if I didn't?

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• Benchmarks relevant for a Visual Studio .Net development workstation

  - by user30715

  I am developing a system with Windows 7-64, Visual Studio and Sharepoint on a virtual workstation on some kind of VMWare server. The system is painfully slow, with VS lagging behind when entering code, Intellisense lagging, opening and saving files takes ages when compared to a normal budget laptop. As far as I can see the virtual machine has OK specs and does not seem to be swapping etc., and the IT dept also says that they can't see anything wrong when they're monitoring the system. As long as the problem is not well-documented, the IT dept and management does not want to throw money (=upgraded laptops) at us, so I need to show some sort of benchmark. It has been many years since I did any system benchmarking, and I don't know the current benchmark software, so my question is which benchmark will be most relevant for Visual Studio performance? Not just for compiling fast, but also to reflect the "responsiveness" of the system. Cheers, user30715

  Read the article

• Windows Vista taskbar not resizing desktop

  - by Luke Schafer

  Hi, I recently started having a frustrating problem with Vista on my laptop that I can't seem to solve. I'm trying to get it to have the vanilla taskbar settings - always shown, resizes the desktop area (as in, the space the taskbar takes up isn't available for fullscreen windows), and always on top. No matter what combination of settings and toggles I do, I can't get it. With the normal settings that achieve this (Only keep on top, and optionally locked, checked), I get: Desktop extends behind the taskbar (so icons and the like are behind it) Non-maximised windows appear behind it when overlapping. Maximised windows take the full area of the screen and are behind the taskbar Maximised Google Chrome takes the full screen size and is in front of the taskbar I tried googling and also just randomly toggling on and off the settings, haven't found a fix.

  Read the article

• Gnuplot with octave produces only entirely black bar diagrams

  - by Lambda Dusk

  My problem is the following: On my system (Linux Mint 14), the normal octave and gnuplot packages only produce completely black bar diagrams: I have tried to change the colours in any way I could imagine, but no avail: bar(xbin, yy, 'barwidth', 1, 'facecolor', 'r', 'edgecolor', 'b'); xlabel('x_i'); ylabel('p_i'); print -deps bars.eps However, when I plot the graph with the command graphics_toolkit fltk; It looks fine - but fltk doesn't either understand umlauts or LaTeX-style formula notation like p_i (necessary for captions and labels). Maybe I haven't configured something correctly. I just installed octave from the repos and thought it would work. Anyone can help?

  Read the article

• CheckPoint VPN-1 SecureClient inability to navigate behind a Linksys WAG300N

  - by user46819

  I have a Linksys WAG300N, I'm accessing my LAN with Wifi and everything works fine on my Windows 7 Enterprise laptop. When I try to connect to my company's VPN the connection succeeds, but I cannot access any internet site either within my work network or public site like Yahoo or Google. In my Linksys control panel I already verified all types of VPNs are enable to passthrough. Normal IPSec and Windows VPN worked in the past without any problems. CheckPoint seems to have a solution, but I do not have the ability to change the IP in my client and of course using another NAT device in between is not a solution for me. Edit: adding link to the Checkpoint solution, https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk26189

  Read the article

• How to repair a broken .EXE file association

  - by Pointy

  After (hopefully) scrubbing viruses out of a Windows 7 installation (after deciding not to simply run over the laptop repeatedly with my car), I've got everything almost back to normal. The only lingering issue I have is that for my non-admin users, the ".exe" file extension doesn't work. That is, clicking on the various desktop application links results in a "How do you want to open this?" dialog. I've been through the alleged registry fixing from "winhelponline" and that had absolutely no effect. I've tried running "assoc" for the affected users, but it reports the .exe association to be "exefile" even though it persistently does not work. Right-clicking on a desktop icon and then choosing "start" does successfully open an application, but that's clearly a terrible situation. For my admin user, things seem to work fine. What do I need to do to get things working?

  Read the article

• Free DNS software with failover support?

  - by Lin

  I'm looking for DNS software that can accomplish the following: Check health of all A records at set intervals If server is unresponsive after multiple successive checks, replace A record with a working server When a server is down, check it periodically. Once it's up, restore normal A records Here's an equivalent I thought of: Run DNS servers with very low TTL (minutes) Use a cron job to periodically query all webservers Use sed to replace A records if need be, and then restart DNS server I have a hard time believing there isn't already something that can accomplish the above. I'm not looking for a paid service, and I'm restricted to anything I can run with root access to a VPS. Any suggestions would be great. Thanks!

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >