Search Results

Search found 27946 results on 1118 pages for 'output buffer empty'.

Page 269/1118 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• linux find the command invoked

  - by Subbu

  I am writing a C program which determines the number of bytes read from the standard input . I found out there are ways to give input to the program piped input redirection entering into command line while the program is waiting for input How to find the exact command by which the program was executed from the shell . I tried using command-line arguments but failed . #include <stdio.h> int main(int argc,char *argv[]) { char buffer[100]; int n; for(n=1;n<argc;n++) printf("argument: %s\t",argv[n]); printf("\n"); if(argc==1) printf("waiting for input :"); else if (argc==3) printf("Not waiting for input . Got the source from command itself ."); n = read(0,buffer,100); if(n==-1) printf("\nError occured in reading"); printf("\nReading successfully done\n"); return 0; } Also ,

  Read the article

• Cannot Start Nginx Compiled from Source

  - by Jason Alan Kennedy

  I am trying to compile Nginx from source based on the original compiled Nginx server running on my DigitalOcean server ( Ubuntu-14.04 64x ) but with a few extra modules. I can get everything installed smoothly but I can not get it to start. I am sure the ini is correct because I copied the original source off the current running Nginx server [ Even though I see that Nginx now adds the ini when compiling fron source ]. Below is the [ lengthy process ] that I am performing - add sorry but I wanted to be thorough for those who are in need of the info ]. Because I am a newB to Nginx, I am sure I am missing something or just have it all wrong. If you may look over what I have done and see if you spot anything I need/need to change, I will greatly appreciate it. Thnx! With the original Nginx server still running: I check the current/running Nginx configuration so I can build the new Nginx instance the same but with the added modules: nginx -V # The out-put: configure arguments: --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' --prefix=/usr/share/nginx --conf-path=/etc/nginx/nginx.conf --http-log-path=/var/log/nginx/access.log --error-log-path=/var/log/nginx/error.log --lock-path=/var/lock/nginx.lock --pid-path=/run/nginx.pid --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --with-debug --with-pcre-jit --with-ipv6 --with-http_ssl_module --with-http_stub_status_module --with-http_realip_module --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_spdy_module --with-http_sub_module --with-http_xslt_module NOTE: The configure arguments below return errors during 'make' so I removed them. I don't know what they are - could this be related to my issue??? --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' Moving on: # So I don't have to sudo every line: sudo bash # Check for updates first thing: apt-get update # Install various prerequisites needed to compile Nginx: apt-get install build-essential libgd2-xpm-dev lsb-base zlib1g-dev libpcre3 libpcre3-dev libbz2-dev libxslt1-dev libxml2 libssl-dev libgeoip-dev tar unzip openssl # Create System users [ if it doesn't exist - but I see its there on DigitalOceans' Droplets all-ready ]: adduser --system --no-create-home --disabled-login --disabled-password --group www-data # Download NGINX wget http://nginx.org/download/nginx-1.7.4.tar.gz tar -xvzf nginx-1.7.4.tar.gz # Then Google PageSpeed: wget https://github.com/pagespeed/ngx_pagespeed/archive/release-1.8.31.4-beta.zip unzip release-1.8.31.4-beta.zip # cd into the PageSpeed Directory cd ngx_pagespeed-release-1.8.31.4-beta/ # and add the PSOL files in there: wget https://dl.google.com/dl/page-speed/psol/1.8.31.4.tar.gz tar -xzvf 1.8.31.4.tar.gz # Get back to the root directory: cd # I add the ngx_cache_purge module and will install the Nginx Helper plugin for WP later: wget https://github.com/FRiCKLE/ngx_cache_purge/archive/2.1.zip unzip 2.1.zip # Add the headers-more-nginx-module: wget https://github.com/openresty/headers-more-nginx-module/archive/v0.25.zip unzip v0.25.zip # and the naxsi module for added security: wget https://github.com/nbs-system/naxsi/archive/0.53-2.tar.gz tar -xvzf 0.53-2.tar.gz # cd to the new Nginx directory cd nginx-1.7.4 # Set up the configuration build based on the current running Nginx config args and add my additional modules: ./configure \ --add-module=$HOME/naxsi-0.53-2/naxsi_src \ --prefix=/usr/share/nginx \ --conf-path=/etc/nginx/nginx.conf \ --http-log-path=/var/log/nginx/access.log \ --error-log-path=/var/log/nginx/error.log \ --lock-path=/var/lock/nginx.lock \ --pid-path=/run/nginx.pid \ --http-client-body-temp-path=/var/lib/nginx/body \ --http-fastcgi-temp-path=/var/lib/nginx/fastcgi \ --http-proxy-temp-path=/var/lib/nginx/proxy \ --http-scgi-temp-path=/var/lib/nginx/scgi \ --http-uwsgi-temp-path=/var/lib/nginx/uwsgi \ --user=www-data \ --group=www-data \ --with-debug \ --with-pcre-jit \ --with-ipv6 \ --with-http_ssl_module \ --with-http_stub_status_module \ --with-http_realip_module \ --with-http_addition_module \ --with-http_dav_module \ --with-http_geoip_module \ --with-http_gzip_static_module \ --with-http_image_filter_module \ --with-http_spdy_module \ --with-http_sub_module \ --with-http_xslt_module \ --with-mail \ --with-mail_ssl_module \ --add-module=$HOME/ngx_pagespeed-release-1.8.31.4-beta \ --add-module=$HOME/ngx_cache_purge-2.1 \ --add-module=$HOME/headers-more-nginx-module-0.25 [ENTER] Configuration Summary: Configuration summary + using system PCRE library + using system OpenSSL library + md5: using OpenSSL library + sha1: using OpenSSL library + using system zlib library nginx path prefix: "/usr/share/nginx" nginx binary file: "/usr/share/nginx/sbin/nginx" nginx configuration prefix: "/etc/nginx" nginx configuration file: "/etc/nginx/nginx.conf" nginx pid file: "/run/nginx.pid" nginx error log file: "/var/log/nginx/error.log" nginx http access log file: "/var/log/nginx/access.log" nginx http client request body temporary files: "/var/lib/nginx/body" nginx http proxy temporary files: "/var/lib/nginx/proxy" nginx http fastcgi temporary files: "/var/lib/nginx/fastcgi" nginx http uwsgi temporary files: "/var/lib/nginx/uwsgi" nginx http scgi temporary files: "/var/lib/nginx/scgi" Next step: I cd to root and I check the old Nginx folder locations and double checked the 'make' output to see that they are the same: whereis nginx #Output: nginx: /usr/sbin/nginx /etc/nginx /usr/share/nginx NOTE: Not sure about the '/usr/sbin/nginx' - Possible issue??? Next I copy the old /etc/nginx/nginx.conf, /etc/nginx/sites-available/default, /etc/nginx/sites-enabled/default, /etc/init.d/nginx to a text file locally for safe keeping to use in the new Nginx server. Then stop the running Nginx server: service nginx stop , verify it's stopped: service --status-all and the output is: [ - ] nginx To verify that there are two Nginx directories, I cd to: cd nginx* and the output is an error indicating there are two nginx folders - Cool Beans! :) Now Install the new Nginx server: cd nginx-1.7.4 make install # INSTALL OUTPUT ######################################## make -f objs/Makefile install make[1]: Entering directory `/home/walkingfish/nginx-1.7.4' test -d '/usr/share/nginx' || mkdir -p '/usr/share/nginx' test -d '/usr/share/nginx/sbin' || mkdir -p '/usr/share/nginx/sbin' test ! -f '/usr/share/nginx/sbin/nginx' || mv '/usr/share/nginx/sbin/nginx' '/usr/share/nginx/sbin/nginx.old' cp objs/nginx '/usr/share/nginx/sbin/nginx' test -d '/etc/nginx' || mkdir -p '/etc/nginx' cp conf/koi-win '/etc/nginx' cp conf/koi-utf '/etc/nginx' cp conf/win-utf '/etc/nginx' test -f '/etc/nginx/mime.types' || cp conf/mime.types '/etc/nginx' cp conf/mime.types '/etc/nginx/mime.types.default' test -f '/etc/nginx/fastcgi_params' || cp conf/fastcgi_params '/etc/nginx' cp conf/fastcgi_params '/etc/nginx/fastcgi_params.default' test -f '/etc/nginx/fastcgi.conf' || cp conf/fastcgi.conf '/etc/nginx' cp conf/fastcgi.conf '/etc/nginx/fastcgi.conf.default' test -f '/etc/nginx/uwsgi_params' || cp conf/uwsgi_params '/etc/nginx' cp conf/uwsgi_params '/etc/nginx/uwsgi_params.default' test -f '/etc/nginx/scgi_params' || cp conf/scgi_params '/etc/nginx' cp conf/scgi_params '/etc/nginx/scgi_params.default' test -f '/etc/nginx/nginx.conf' || cp conf/nginx.conf '/etc/nginx/nginx.conf' cp conf/nginx.conf '/etc/nginx/nginx.conf.default' test -d '/run' || mkdir -p '/run' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' test -d '/usr/share/nginx/html' || cp -R html '/usr/share/nginx' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ######################################################### I copy/create the files that I saved earlier to txt files in sites-available, the config, default and ini files then symlink them to sites-enabled, and so on. And now to start the server: service nginx start And this is where s#!+ hits the fan - Nada. I check to see if Nginx is running with service --status-all and its not. Also with nginx -V and its not installed??? I reboot the system too and still nothing. So I am not sure what is wrong here. The ini was copied over from the old server along with all the other config files after deleting the old files. When I opened the new compiled files, the nginx default data was present so I replaced them with my old original data prior to starting the new server for the first time. Also to be safe, I rm /etc/nginx/sites-enabled/default and symlinked with ln -s /etc/nginx/sites-available/default /etc/nginx/sites-enabled/default with no errors and I verified that the data was in the sites-enabled/default file. I don't think the server really/fully installed because of the nginx -V result: The program 'nginx' can be found in the following packages: * nginx-core * nginx-extras * nginx-full * nginx-light * nginx-naxsi Try: apt-get install <selected package> Do/should I apt-get install nginx-1.7.4 ?? Or what package do I use being that its a custom package and make install earlier did nothing?? If you need to see the conf files I copied over from the old to the custom server, LMK and I'll post them. Again your help here would be appreciated!

  Read the article

• How to get Passive FTP Working Through an Iptables Firewall?

  - by user1133248

  I have an iptables firewall running on a Fedora Linux server that is basically being used as a firewall router and OpenVPN server. That's it. We have been using the same iptables firewall code for YEARS. I did make some changes on 21 December to re-route a mySQL port, but given what has happened I've completely backed those changes out. Sometime after those changes were made and backed out passive FTP, served from a vsftpd process, stopped working. We use a passive ftp client to FLING (that's the name of the ftp client running under Windows! :-) ) images from our remote telescopes to our server. I believe it is something in the firewall code because I can drop the firewall and the FTP file transfer (and connecting to the ftp site with Internet Explorer to see the file list) works. When I raise the iptables firewall, it stops working. Again, this is code that we'd been using for years. However, I felt that maybe there was something I missed, so we had a .bak file from 2009 that I used. Same behavior, passive ftp does not work. So, I went and rebuilt the firewall code line by line to see what line was causing the problem. Everything worked until I put the line -A FORWARD -j DROP in very near the end. Of course, if I am correct, this is the line that basically "turns on" the firewall, saying drop everything except for the exceptions I've made above. However, this line has been in the iptables code probably since 2003. So, I'm at the end of my rope, and I still can't figure out why this has stopped working. I guess I need an expert on iptables configuration. Here is the iptables code (from iptables-save) with comments. # Generated by iptables-save v1.3.8 on Thu Jan 5 18:36:25 2012 *nat # One of the things that I remain ignorant about is what these following three lines # do in both the nat tables (which we're not using on this machine) and the following # filter table. I don't know what the numbers are, but I'm ASSUMING they're port # ranges. # :PREROUTING ACCEPT [7435:551429] :POSTROUTING ACCEPT [6097:354458] :OUTPUT ACCEPT [5:451] COMMIT # Completed on Thu Jan 5 18:36:25 2012 # Generated by iptables-save v1.3.8 on Thu Jan 5 18:36:25 2012 *filter :INPUT ACCEPT [10423:1046501] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [15184:16948770] # The following line is for my OpenVPN configuration. -A INPUT -i tun+ -j ACCEPT # In researching this on the Internet I found some iptables code that was supposed to # open the needed ports up. I never needed this before this week, but since passive FTP # was no longer working, I decided to put the code in. The next three lines are part of # that code. -A INPUT -p tcp -m tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --sport 1024:65535 --dport 20 -m state --state ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --sport 1024:65535 --dport 1024:65535 -m state --state RELATED,ESTABLISHED -j ACCEPT # Another line for the OpenVPN configuration. I don't know why the iptables-save mixed # the lines up. -A FORWARD -i tun+ -j ACCEPT # Various forwards for all our services -A FORWARD -s 65.118.148.197 -p tcp -m tcp --dport 3307 -j ACCEPT -A FORWARD -d 65.118.148.197 -p tcp -m tcp --dport 3307 -j ACCEPT -A FORWARD -s 65.118.148.197 -p tcp -m tcp --dport 3306 -j ACCEPT -A FORWARD -d 65.118.148.197 -p tcp -m tcp --dport 3306 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 21 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 21 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 20 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 20 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 7191 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 7191 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 46000:46999 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 46000:46999 -j ACCEPT -A FORWARD -s 65.118.148.0/255.255.255.0 -j ACCEPT -A FORWARD -d 65.118.148.196 -p udp -m udp --dport 53 -j ACCEPT -A FORWARD -s 65.118.148.196 -p udp -m udp --dport 53 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 53 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 53 -j ACCEPT -A FORWARD -d 65.118.148.196 -p udp -m udp --dport 25 -j ACCEPT -A FORWARD -s 65.118.148.196 -p udp -m udp --dport 25 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 42 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 42 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 25 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 25 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -d 65.118.148.204 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -s 65.118.148.204 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -d 65.118.148.196 -p tcp -m tcp --dport 6667 -j ACCEPT -A FORWARD -s 65.118.148.196 -p tcp -m tcp --dport 6667 -j ACCEPT -A FORWARD -s 65.96.214.242 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -s 192.68.148.66 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT # "The line" that causes passive ftp to stop working. Insofar as I can tell, everything # else seems to work - ssh, telnet, mysql, httpd. -A FORWARD -j DROP -A FORWARD -p icmp -j ACCEPT # The following code is again part of my attempt to put in code that would cause passive # ftp to work. I don't know why iptables-save scattered it about like this. -A OUTPUT -p tcp -m tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -m tcp --sport 20 --dport 1024:65535 -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT COMMIT # Completed on Thu Jan 5 18:36:25 2012 So, with all that prelude, my basic question is: How can I get passive ftp to work behind an iptables firewall? As you can see, I've tried to get it working (again) and tried to do some research on the issue, but have come up...short. Any answers would be appreciated by both me and various variable star astronomers around the world! THANKS! -Richard "Doc" Kinne, American Assoc. of Variable Star Observers, [email protected]

  Read the article

• SQLite, python, unicode, and non-utf data

  - by Nathan Spears

  I started by trying to store strings in sqlite using python, and got the message: sqlite3.ProgrammingError: You must not use 8-bit bytestrings unless you use a text_factory that can interpret 8-bit bytestrings (like text_factory = str). It is highly recommended that you instead just switch your application to Unicode strings. Ok, I switched to Unicode strings. Then I started getting the message: sqlite3.OperationalError: Could not decode to UTF-8 column 'tag_artist' with text 'Sigur Rós' when trying to retrieve data from the db. More research and I started encoding it in utf8, but then 'Sigur Rós' starts looking like 'Sigur Rós' note: My console was set to display in 'latin_1' as @John Machin pointed out. What gives? After reading this, describing exactly the same situation I'm in, it seems as if the advice is to ignore the other advice and use 8-bit bytestrings after all. I didn't know much about unicode and utf before I started this process. I've learned quite a bit in the last couple hours, but I'm still ignorant of whether there is a way to correctly convert 'ó' from latin-1 to utf-8 and not mangle it. If there isn't, why would sqlite 'highly recommend' I switch my application to unicode strings? I'm going to update this question with a summary and some example code of everything I've learned in the last 24 hours so that someone in my shoes can have an easy(er) guide. If the information I post is wrong or misleading in any way please tell me and I'll update, or one of you senior guys can update. Summary of answers Let me first state the goal as I understand it. The goal in processing various encodings, if you are trying to convert between them, is to understand what your source encoding is, then convert it to unicode using that source encoding, then convert it to your desired encoding. Unicode is a base and encodings are mappings of subsets of that base. utf_8 has room for every character in unicode, but because they aren't in the same place as, for instance, latin_1, a string encoded in utf_8 and sent to a latin_1 console will not look the way you expect. In python the process of getting to unicode and into another encoding looks like: str.decode('source_encoding').encode('desired_encoding') or if the str is already in unicode str.encode('desired_encoding') For sqlite I didn't actually want to encode it again, I wanted to decode it and leave it in unicode format. Here are four things you might need to be aware of as you try to work with unicode and encodings in python. The encoding of the string you want to work with, and the encoding you want to get it to. The system encoding. The console encoding. The encoding of the source file Elaboration: (1) When you read a string from a source, it must have some encoding, like latin_1 or utf_8. In my case, I'm getting strings from filenames, so unfortunately, I could be getting any kind of encoding. Windows XP uses UCS-2 (a Unicode system) as its native string type, which seems like cheating to me. Fortunately for me, the characters in most filenames are not going to be made up of more than one source encoding type, and I think all of mine were either completely latin_1, completely utf_8, or just plain ascii (which is a subset of both of those). So I just read them and decoded them as if they were still in latin_1 or utf_8. It's possible, though, that you could have latin_1 and utf_8 and whatever other characters mixed together in a filename on Windows. Sometimes those characters can show up as boxes, other times they just look mangled, and other times they look correct (accented characters and whatnot). Moving on. (2) Python has a default system encoding that gets set when python starts and can't be changed during runtime. See here for details. Dirty summary ... well here's the file I added: \# sitecustomize.py \# this file can be anywhere in your Python path, \# but it usually goes in ${pythondir}/lib/site-packages/ import sys sys.setdefaultencoding('utf_8') This system encoding is the one that gets used when you use the unicode("str") function without any other encoding parameters. To say that another way, python tries to decode "str" to unicode based on the default system encoding. (3) If you're using IDLE or the command-line python, I think that your console will display according to the default system encoding. I am using pydev with eclipse for some reason, so I had to go into my project settings, edit the launch configuration properties of my test script, go to the Common tab, and change the console from latin-1 to utf-8 so that I could visually confirm what I was doing was working. (4) If you want to have some test strings, eg test_str = "ó" in your source code, then you will have to tell python what kind of encoding you are using in that file. (FYI: when I mistyped an encoding I had to ctrl-Z because my file became unreadable.) This is easily accomplished by putting a line like so at the top of your source code file: # -*- coding: utf_8 -*- If you don't have this information, python attempts to parse your code as ascii by default, and so: SyntaxError: Non-ASCII character '\xf3' in file _redacted_ on line 81, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details Once your program is working correctly, or, if you aren't using python's console or any other console to look at output, then you will probably really only care about #1 on the list. System default and console encoding are not that important unless you need to look at output and/or you are using the builtin unicode() function (without any encoding parameters) instead of the string.decode() function. I wrote a demo function I will paste into the bottom of this gigantic mess that I hope correctly demonstrates the items in my list. Here is some of the output when I run the character 'ó' through the demo function, showing how various methods react to the character as input. My system encoding and console output are both set to utf_8 for this run: '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Now I will change the system and console encoding to latin_1, and I get this output for the same input: 'ó' = original char <type 'str'> repr(char)='\xf3' 'ó' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Notice that the 'original' character displays correctly and the builtin unicode() function works now. Now I change my console output back to utf_8. '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' '?' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Here everything still works the same as last time but the console can't display the output correctly. Etc. The function below also displays more information that this and hopefully would help someone figure out where the gap in their understanding is. I know all this information is in other places and more thoroughly dealt with there, but I hope that this would be a good kickoff point for someone trying to get coding with python and/or sqlite. Ideas are great but sometimes source code can save you a day or two of trying to figure out what functions do what. Disclaimers: I'm no encoding expert, I put this together to help my own understanding. I kept building on it when I should have probably started passing functions as arguments to avoid so much redundant code, so if I can I'll make it more concise. Also, utf_8 and latin_1 are by no means the only encoding schemes, they are just the two I was playing around with because I think they handle everything I need. Add your own encoding schemes to the demo function and test your own input. One more thing: there are apparently crazy application developers making life difficult in Windows. #!/usr/bin/env python # -*- coding: utf_8 -*- import os import sys def encodingDemo(str): validStrings = () try: print "str =",str,"{0} repr(str) = {1}".format(type(str), repr(str)) validStrings += ((str,""),) except UnicodeEncodeError as ude: print "Couldn't print the str itself because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print ude try: x = unicode(str) print "unicode(str) = ",x validStrings+= ((x, " decoded into unicode by the default system encoding"),) except UnicodeDecodeError as ude: print "ERROR. unicode(str) couldn't decode the string because the system encoding is set to an encoding that doesn't understand some character in the string." print "\tThe system encoding is set to {0}. See error:\n\t".format(sys.getdefaultencoding()), print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the unicode(str) because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('latin_1') print "str.decode('latin_1') =",x validStrings+= ((x, " decoded with latin_1 into unicode"),) try: print "str.decode('latin_1').encode('utf_8') =",str.decode('latin_1').encode('utf_8') validStrings+= ((x, " decoded with latin_1 into unicode and encoded into utf_8"),) except UnicodeDecodeError as ude: print "The string was decoded into unicode using the latin_1 encoding, but couldn't be encoded into utf_8. See error:\n\t", print ude except UnicodeDecodeError as ude: print "Something didn't work, probably because the string wasn't latin_1 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('latin_1') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('utf_8') print "str.decode('utf_8') =",x validStrings+= ((x, " decoded with utf_8 into unicode"),) try: print "str.decode('utf_8').encode('latin_1') =",str.decode('utf_8').encode('latin_1') except UnicodeDecodeError as ude: print "str.decode('utf_8').encode('latin_1') didn't work. The string was decoded into unicode using the utf_8 encoding, but couldn't be encoded into latin_1. See error:\n\t", validStrings+= ((x, " decoded with utf_8 into unicode and encoded into latin_1"),) print ude except UnicodeDecodeError as ude: print "str.decode('utf_8') didn't work, probably because the string wasn't utf_8 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('utf_8') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t",uee print print "Printing information about each character in the original string." for char in str: try: print "\t'" + char + "' = original char {0} repr(char)={1}".format(type(char), repr(char)) except UnicodeDecodeError as ude: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), ude) except UnicodeEncodeError as uee: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), uee) print uee try: x = unicode(char) print "\t'" + x + "' = unicode(char) {1} repr(unicode(char))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = unicode(char) ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = unicode(char) {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('latin_1') print "\t'" + x + "' = char.decode('latin_1') {1} repr(char.decode('latin_1'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('latin_1') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('latin_1') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('utf_8') print "\t'" + x + "' = char.decode('utf_8') {1} repr(char.decode('utf_8'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('utf_8') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('utf_8') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) print x = 'ó' encodingDemo(x) Much thanks for the answers below and especially to @John Machin for answering so thoroughly.

  Read the article

• GZip/Deflate Compression in ASP.NET MVC

  - by Rick Strahl

  A long while back I wrote about GZip compression in ASP.NET. In that article I describe two generic helper methods that I've used in all sorts of ASP.NET application from WebForms apps to HttpModules and HttpHandlers that require gzip or deflate compression. The same static methods also work in ASP.NET MVC. Here are the two routines:/// <summary> /// Determines if GZip is supported /// </summary> /// <returns></returns> public static bool IsGZipSupported() { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (!string.IsNullOrEmpty(AcceptEncoding) && (AcceptEncoding.Contains("gzip") || AcceptEncoding.Contains("deflate"))) return true; return false; } /// <summary> /// Sets up the current page or handler to use GZip through a Response.Filter /// IMPORTANT: /// You have to call this method before any output is generated! /// </summary> public static void GZipEncodePage() { HttpResponse Response = HttpContext.Current.Response; if (IsGZipSupported()) { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (AcceptEncoding.Contains("gzip")) { Response.Filter = new System.IO.Compression.GZipStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "gzip"); } else { Response.Filter = new System.IO.Compression.DeflateStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "deflate"); } } // Allow proxy servers to cache encoded and unencoded versions separately Response.AppendHeader("Vary", "Content-Encoding"); } The first method checks whether the client sending the request includes the accept-encoding for either gzip or deflate, and if if it does it returns true. The second function uses IsGzipSupported() to decide whether it should encode content and uses an Response Filter to do its job. Basically response filters look at the Response output stream as it's written and convert the data flowing through it. Filters are a bit tricky to work with but the two .NET filter streams for GZip and Deflate Compression make this a snap to implement. In my old code and even now in MVC I can always do:public ActionResult List(string keyword=null, int category=0) { WebUtils.GZipEncodePage(); …} to encode my content. And that works just fine. The proper way: Create an ActionFilterAttribute However in MVC this sort of thing is typically better handled by an ActionFilter which can be applied with an attribute. So to be all prim and proper I created an CompressContentAttribute ActionFilter that incorporates those two helper methods and which looks like this:/// <summary> /// Attribute that can be added to controller methods to force content /// to be GZip encoded if the client supports it /// </summary> public class CompressContentAttribute : ActionFilterAttribute { /// <summary> /// Override to compress the content that is generated by /// an action method. /// </summary> /// <param name="filterContext"></param> public override void OnActionExecuting(ActionExecutingContext filterContext) { GZipEncodePage(); } /// <summary> /// Determines if GZip is supported /// </summary> /// <returns></returns> public static bool IsGZipSupported() { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (!string.IsNullOrEmpty(AcceptEncoding) && (AcceptEncoding.Contains("gzip") || AcceptEncoding.Contains("deflate"))) return true; return false; } /// <summary> /// Sets up the current page or handler to use GZip through a Response.Filter /// IMPORTANT: /// You have to call this method before any output is generated! /// </summary> public static void GZipEncodePage() { HttpResponse Response = HttpContext.Current.Response; if (IsGZipSupported()) { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (AcceptEncoding.Contains("gzip")) { Response.Filter = new System.IO.Compression.GZipStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "gzip"); } else { Response.Filter = new System.IO.Compression.DeflateStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "deflate"); } } // Allow proxy servers to cache encoded and unencoded versions separately Response.AppendHeader("Vary", "Content-Encoding"); } } It's basically the same code wrapped into an ActionFilter attribute, which intercepts requests MVC requests to Controller methods and lets you hook up logic before and after the methods have executed. Here I want to override OnActionExecuting() which fires before the Controller action is fired. With the CompressContentAttribute created, it can now be applied to either the controller as a whole:[CompressContent] public class ClassifiedsController : ClassifiedsBaseController { … } or to one of the Action methods:[CompressContent] public ActionResult List(string keyword=null, int category=0) { … } The former applies compression to every action method, while the latter is selective and only applies it to the individual action method. Is the attribute better than the static utility function? Not really, but it is the standard MVC way to hook up 'filter' content and that's where others are likely to expect to set options like this. In fact,  you have a bit more control with the utility function because you can conditionally apply it in code, but this is actually much less likely in MVC applications than old WebForms apps since controller methods tend to be more focused. Compression Caveats Http compression is very cool and pretty easy to implement in ASP.NET but you have to be careful with it - especially if your content might get transformed or redirected inside of ASP.NET. A good example, is if an error occurs and a compression filter is applied. ASP.NET errors don't clear the filter, but clear the Response headers which results in some nasty garbage because the compressed content now no longer matches the headers. Another issue is Caching, which has to account for all possible ways of compression and non-compression that the content is served. Basically compressed content and caching don't mix well. I wrote about several of these issues in an old blog post and I recommend you take a quick peek before diving into making every bit of output Gzip encoded. None of these are show stoppers, but you have to be aware of the issues. Related Posts GZip Compression with ASP.NET Content ASP.NET GZip Encoding Caveats© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• SQLite, python, unicode, and non-utf data

  - by Nathan Spears

  I started by trying to store strings in sqlite using python, and got the message: sqlite3.ProgrammingError: You must not use 8-bit bytestrings unless you use a text_factory that can interpret 8-bit bytestrings (like text_factory = str). It is highly recommended that you instead just switch your application to Unicode strings. Ok, I switched to Unicode strings. Then I started getting the message: sqlite3.OperationalError: Could not decode to UTF-8 column 'tag_artist' with text 'Sigur Rós' when trying to retrieve data from the db. More research and I started encoding it in utf8, but then 'Sigur Rós' starts looking like 'Sigur Rós' note: My console was set to display in 'latin_1' as @John Machin pointed out. What gives? After reading this, describing exactly the same situation I'm in, it seems as if the advice is to ignore the other advice and use 8-bit bytestrings after all. I didn't know much about unicode and utf before I started this process. I've learned quite a bit in the last couple hours, but I'm still ignorant of whether there is a way to correctly convert 'ó' from latin-1 to utf-8 and not mangle it. If there isn't, why would sqlite 'highly recommend' I switch my application to unicode strings? I'm going to update this question with a summary and some example code of everything I've learned in the last 24 hours so that someone in my shoes can have an easy(er) guide. If the information I post is wrong or misleading in any way please tell me and I'll update, or one of you senior guys can update. Summary of answers Let me first state the goal as I understand it. The goal in processing various encodings, if you are trying to convert between them, is to understand what your source encoding is, then convert it to unicode using that source encoding, then convert it to your desired encoding. Unicode is a base and encodings are mappings of subsets of that base. utf_8 has room for every character in unicode, but because they aren't in the same place as, for instance, latin_1, a string encoded in utf_8 and sent to a latin_1 console will not look the way you expect. In python the process of getting to unicode and into another encoding looks like: str.decode('source_encoding').encode('desired_encoding') or if the str is already in unicode str.encode('desired_encoding') For sqlite I didn't actually want to encode it again, I wanted to decode it and leave it in unicode format. Here are four things you might need to be aware of as you try to work with unicode and encodings in python. The encoding of the string you want to work with, and the encoding you want to get it to. The system encoding. The console encoding. The encoding of the source file Elaboration: (1) When you read a string from a source, it must have some encoding, like latin_1 or utf_8. In my case, I'm getting strings from filenames, so unfortunately, I could be getting any kind of encoding. Windows XP uses UCS-2 (a Unicode system) as its native string type, which seems like cheating to me. Fortunately for me, the characters in most filenames are not going to be made up of more than one source encoding type, and I think all of mine were either completely latin_1, completely utf_8, or just plain ascii (which is a subset of both of those). So I just read them and decoded them as if they were still in latin_1 or utf_8. It's possible, though, that you could have latin_1 and utf_8 and whatever other characters mixed together in a filename on Windows. Sometimes those characters can show up as boxes, other times they just look mangled, and other times they look correct (accented characters and whatnot). Moving on. (2) Python has a default system encoding that gets set when python starts and can't be changed during runtime. See here for details. Dirty summary ... well here's the file I added: \# sitecustomize.py \# this file can be anywhere in your Python path, \# but it usually goes in ${pythondir}/lib/site-packages/ import sys sys.setdefaultencoding('utf_8') This system encoding is the one that gets used when you use the unicode("str") function without any other encoding parameters. To say that another way, python tries to decode "str" to unicode based on the default system encoding. (3) If you're using IDLE or the command-line python, I think that your console will display according to the default system encoding. I am using pydev with eclipse for some reason, so I had to go into my project settings, edit the launch configuration properties of my test script, go to the Common tab, and change the console from latin-1 to utf-8 so that I could visually confirm what I was doing was working. (4) If you want to have some test strings, eg test_str = "ó" in your source code, then you will have to tell python what kind of encoding you are using in that file. (FYI: when I mistyped an encoding I had to ctrl-Z because my file became unreadable.) This is easily accomplished by putting a line like so at the top of your source code file: # -*- coding: utf_8 -*- If you don't have this information, python attempts to parse your code as ascii by default, and so: SyntaxError: Non-ASCII character '\xf3' in file _redacted_ on line 81, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details Once your program is working correctly, or, if you aren't using python's console or any other console to look at output, then you will probably really only care about #1 on the list. System default and console encoding are not that important unless you need to look at output and/or you are using the builtin unicode() function (without any encoding parameters) instead of the string.decode() function. I wrote a demo function I will paste into the bottom of this gigantic mess that I hope correctly demonstrates the items in my list. Here is some of the output when I run the character 'ó' through the demo function, showing how various methods react to the character as input. My system encoding and console output are both set to utf_8 for this run: '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Now I will change the system and console encoding to latin_1, and I get this output for the same input: 'ó' = original char <type 'str'> repr(char)='\xf3' 'ó' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Notice that the 'original' character displays correctly and the builtin unicode() function works now. Now I change my console output back to utf_8. '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' '?' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Here everything still works the same as last time but the console can't display the output correctly. Etc. The function below also displays more information that this and hopefully would help someone figure out where the gap in their understanding is. I know all this information is in other places and more thoroughly dealt with there, but I hope that this would be a good kickoff point for someone trying to get coding with python and/or sqlite. Ideas are great but sometimes source code can save you a day or two of trying to figure out what functions do what. Disclaimers: I'm no encoding expert, I put this together to help my own understanding. I kept building on it when I should have probably started passing functions as arguments to avoid so much redundant code, so if I can I'll make it more concise. Also, utf_8 and latin_1 are by no means the only encoding schemes, they are just the two I was playing around with because I think they handle everything I need. Add your own encoding schemes to the demo function and test your own input. One more thing: there are apparently crazy application developers making life difficult in Windows. #!/usr/bin/env python # -*- coding: utf_8 -*- import os import sys def encodingDemo(str): validStrings = () try: print "str =",str,"{0} repr(str) = {1}".format(type(str), repr(str)) validStrings += ((str,""),) except UnicodeEncodeError as ude: print "Couldn't print the str itself because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print ude try: x = unicode(str) print "unicode(str) = ",x validStrings+= ((x, " decoded into unicode by the default system encoding"),) except UnicodeDecodeError as ude: print "ERROR. unicode(str) couldn't decode the string because the system encoding is set to an encoding that doesn't understand some character in the string." print "\tThe system encoding is set to {0}. See error:\n\t".format(sys.getdefaultencoding()), print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the unicode(str) because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('latin_1') print "str.decode('latin_1') =",x validStrings+= ((x, " decoded with latin_1 into unicode"),) try: print "str.decode('latin_1').encode('utf_8') =",str.decode('latin_1').encode('utf_8') validStrings+= ((x, " decoded with latin_1 into unicode and encoded into utf_8"),) except UnicodeDecodeError as ude: print "The string was decoded into unicode using the latin_1 encoding, but couldn't be encoded into utf_8. See error:\n\t", print ude except UnicodeDecodeError as ude: print "Something didn't work, probably because the string wasn't latin_1 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('latin_1') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('utf_8') print "str.decode('utf_8') =",x validStrings+= ((x, " decoded with utf_8 into unicode"),) try: print "str.decode('utf_8').encode('latin_1') =",str.decode('utf_8').encode('latin_1') except UnicodeDecodeError as ude: print "str.decode('utf_8').encode('latin_1') didn't work. The string was decoded into unicode using the utf_8 encoding, but couldn't be encoded into latin_1. See error:\n\t", validStrings+= ((x, " decoded with utf_8 into unicode and encoded into latin_1"),) print ude except UnicodeDecodeError as ude: print "str.decode('utf_8') didn't work, probably because the string wasn't utf_8 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('utf_8') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t",uee print print "Printing information about each character in the original string." for char in str: try: print "\t'" + char + "' = original char {0} repr(char)={1}".format(type(char), repr(char)) except UnicodeDecodeError as ude: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), ude) except UnicodeEncodeError as uee: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), uee) print uee try: x = unicode(char) print "\t'" + x + "' = unicode(char) {1} repr(unicode(char))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = unicode(char) ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = unicode(char) {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('latin_1') print "\t'" + x + "' = char.decode('latin_1') {1} repr(char.decode('latin_1'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('latin_1') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('latin_1') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('utf_8') print "\t'" + x + "' = char.decode('utf_8') {1} repr(char.decode('utf_8'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('utf_8') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('utf_8') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) print x = 'ó' encodingDemo(x) Much thanks for the answers below and especially to @John Machin for answering so thoroughly.

  Read the article

• Webservice works with SoapSonar but not with Visual Studio Winform

  - by Rebol Tutorial

  I have generated a wsdl file with Visual Studio which is here; http://reboltutorial.com/webservices/discordian.wsdl Implementation is a cgi instead of a .net framework program but that should not matter as it is the purposes of webservices. I tested it successfully with SoapSonar: But under Visual Studio it fails with this code: private void button1_Click(object sender, EventArgs e) { RebolTutorial.ServiceSoapClient Discordian = new RebolTutorial.ServiceSoapClient("ServiceSoap"); int year = int.Parse(this.year.Text); int month = int.Parse(this.month.Text); int day = int.Parse(this.day.Text); response.Text = Discordian.Discordian(year,month,day); } Any reason you can see ? Thanks. Request below: <?xml version="1.0" encoding="utf-8"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://reboltutorial.com/"> <soap:Body> <tns:Discordian> <tns:year>2010</tns:year> <tns:month>5</tns:month> <tns:day>1</tns:day> </tns:Discordian> </soap:Body> </soap:Envelope> as well as WSDL if needed: <?xml version="1.0" encoding="utf-8"?> <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://reboltutorial.com/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://reboltutorial.com/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"> <wsdl:types> <s:schema elementFormDefault="qualified" targetNamespace="http://reboltutorial.com/"> <s:element name="Discordian"> <s:complexType> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="year" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="month" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="day" type="s:int" /> </s:sequence> </s:complexType> </s:element> <s:element name="DiscordianResponse"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="DiscordianResult" type="s:string" /> </s:sequence> </s:complexType> </s:element> </s:schema> </wsdl:types> <wsdl:message name="DiscordianSoapIn"> <wsdl:part name="parameters" element="tns:Discordian" /> </wsdl:message> <wsdl:message name="DiscordianSoapOut"> <wsdl:part name="parameters" element="tns:DiscordianResponse" /> </wsdl:message> <wsdl:portType name="ServiceSoap"> <wsdl:operation name="Discordian"> <wsdl:input message="tns:DiscordianSoapIn" /> <wsdl:output message="tns:DiscordianSoapOut" /> </wsdl:operation> </wsdl:portType> <wsdl:binding name="ServiceSoap" type="tns:ServiceSoap"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" /> <wsdl:operation name="Discordian"> <soap:operation soapAction="http://reboltutorial.com/Discordian" style="document" /> <wsdl:input> <soap:body use="literal" /> </wsdl:input> <wsdl:output> <soap:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="ServiceSoap12" type="tns:ServiceSoap"> <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" /> <wsdl:operation name="Discordian"> <soap12:operation soapAction="http://reboltutorial.com/Discordian" style="document" /> <wsdl:input> <soap12:body use="literal" /> </wsdl:input> <wsdl:output> <soap12:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="Service"> <wsdl:port name="ServiceSoap" binding="tns:ServiceSoap"> <soap:address location="http://reboltutorial.com/cgi-bin/discordian.cgi" /> </wsdl:port> <wsdl:port name="ServiceSoap12" binding="tns:ServiceSoap12"> <soap12:address location="http://reboltutorial.com/cgi-bin/discordian.cgi" /> </wsdl:port> </wsdl:service> </wsdl:definitions>

  Read the article

• WebSocket and Java EE 7 - Getting Ready for JSR 356 (TOTD #181)

  - by arungupta

  WebSocket is developed as part of HTML 5 specification and provides a bi-directional, full-duplex communication channel over a single TCP socket. It provides dramatic improvement over the traditional approaches of Polling, Long-Polling, and Streaming for two-way communication. There is no latency from establishing new TCP connections for each HTTP message. There is a WebSocket API and the WebSocket Protocol. The Protocol defines "handshake" and "framing". The handshake defines how a normal HTTP connection can be upgraded to a WebSocket connection. The framing defines wire format of the message. The design philosophy is to keep the framing minimum to avoid the overhead. Both text and binary data can be sent using the API. WebSocket may look like a competing technology to Server-Sent Events (SSE), but they are not. Here are the key differences: WebSocket can send and receive data from a client. A typical example of WebSocket is a two-player game or a chat application. Server-Sent Events can only push data data to the client. A typical example of SSE is stock ticker or news feed. With SSE, XMLHttpRequest can be used to send data to the server. For server-only updates, WebSockets has an extra overhead and programming can be unecessarily complex. SSE provides a simple and easy-to-use model that is much better suited. SSEs are sent over traditional HTTP and so no modification is required on the server-side. WebSocket require servers that understand the protocol. SSE have several features that are missing from WebSocket such as automatic reconnection, event IDs, and the ability to send arbitrary events. The client automatically tries to reconnect if the connection is closed. The default wait before trying to reconnect is 3 seconds and can be configured by including "retry: XXXX\n" header where XXXX is the milliseconds to wait before trying to reconnect. Event stream can include a unique event identifier. This allows the server to determine which events need to be fired to each client in case the connection is dropped in between. The data can span multiple lines and can be of any text format as long as EventSource message handler can process it. WebSockets provide true real-time updates, SSE can be configured to provide close to real-time by setting appropriate timeouts. OK, so all excited about WebSocket ? Want to convert your POJOs into WebSockets endpoint ? websocket-sdk and GlassFish 4.0 is here to help! The complete source code shown in this project can be downloaded here. On the server-side, the WebSocket SDK converts a POJO into a WebSocket endpoint using simple annotations. Here is how a WebSocket endpoint will look like: @WebSocket(path="/echo")public class EchoBean { @WebSocketMessage public String echo(String message) { return message + " (from your server)"; }} In this code "@WebSocket" is a class-level annotation that declares a POJO to accept WebSocket messages. The path at which the messages are accepted is specified in this annotation. "@WebSocketMessage" indicates the Java method that is invoked when the endpoint receives a message. This method implementation echoes the received message concatenated with an additional string. The client-side HTML page looks like <div style="text-align: center;"> <form action=""> <input onclick="send_echo()" value="Press me" type="button"> <input id="textID" name="message" value="Hello WebSocket!" type="text"><br> </form></div><div id="output"></div> WebSocket allows a full-duplex communication. So the client, a browser in this case, can send a message to a server, a WebSocket endpoint in this case. And the server can send a message to the client at the same time. This is unlike HTTP which follows a "request" followed by a "response". In this code, the "send_echo" method in the JavaScript is invoked on the button click. There is also a <div> placeholder to display the response from the WebSocket endpoint. The JavaScript looks like: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/websockets/echo"; var websocket = new WebSocket(wsUri); websocket.onopen = function(evt) { onOpen(evt) }; websocket.onmessage = function(evt) { onMessage(evt) }; websocket.onerror = function(evt) { onError(evt) }; function init() { output = document.getElementById("output"); } function send_echo() { websocket.send(textID.value); writeToScreen("SENT: " + textID.value); } function onOpen(evt) { writeToScreen("CONNECTED"); } function onMessage(evt) { writeToScreen("RECEIVED: " + evt.data); } function onError(evt) { writeToScreen('<span style="color: red;">ERROR:</span> ' + evt.data); } function writeToScreen(message) { var pre = document.createElement("p"); pre.style.wordWrap = "break-word"; pre.innerHTML = message; output.appendChild(pre); } window.addEventListener("load", init, false);</script> In this code The URI to connect to on the server side is of the format ws://<HOST>:<PORT>/websockets/<PATH> "ws" is a new URI scheme introduced by the WebSocket protocol. <PATH> is the path on the endpoint where the WebSocket messages are accepted. In our case, it is ws://localhost:8080/websockets/echo WEBSOCKET_SDK-1 will ensure that context root is included in the URI as well. WebSocket is created as a global object so that the connection is created only once. This object establishes a connection with the given host, port and the path at which the endpoint is listening. The WebSocket API defines several callbacks that can be registered on specific events. The "onopen", "onmessage", and "onerror" callbacks are registered in this case. The callbacks print a message on the browser indicating which one is called and additionally also prints the data sent/received. On the button click, the WebSocket object is used to transmit text data to the endpoint. Binary data can be sent as one blob or using buffering. The HTTP request headers sent for the WebSocket call are: GET ws://localhost:8080/websockets/echo HTTP/1.1Origin: http://localhost:8080Connection: UpgradeSec-WebSocket-Extensions: x-webkit-deflate-frameHost: localhost:8080Sec-WebSocket-Key: mDbnYkAUi0b5Rnal9/cMvQ==Upgrade: websocketSec-WebSocket-Version: 13 And the response headers received are Connection:UpgradeSec-WebSocket-Accept:q4nmgFl/lEtU2ocyKZ64dtQvx10=Upgrade:websocket(Challenge Response):00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 The headers are shown in Chrome as shown below: The complete source code shown in this project can be downloaded here. The builds from websocket-sdk are integrated in GlassFish 4.0 builds. Would you like to live on the bleeding edge ? Then follow the instructions below to check out the workspace and install the latest SDK: Check out the source code svn checkout https://svn.java.net/svn/websocket-sdk~source-code-repository Build and install the trunk in your local repository as: mvn install Copy "./bundles/websocket-osgi/target/websocket-osgi-0.3-SNAPSHOT.jar" to "glassfish3/glassfish/modules/websocket-osgi.jar" in your GlassFish 4 latest promoted build. Notice, you need to overwrite the JAR file. Anybody interested in building a cool application using WebSocket and get it running on GlassFish ? :-) This work will also feed into JSR 356 - Java API for WebSocket. On a lighter side, there seems to be less agreement on the name. Here are some of the options that are prevalent: WebSocket (W3C API, the URL is www.w3.org/TR/websockets though) Web Socket (HTML5 Demos - html5demos.com/web-socket) Websocket (Jenkins Plugin - wiki.jenkins-ci.org/display/JENKINS/Websocket%2BPlugin) WebSockets (Used by Mozilla - developer.mozilla.org/en/WebSockets, but use WebSocket as well) Web sockets (HTML5 Working Group - www.whatwg.org/specs/web-apps/current-work/multipage/network.html) Web Sockets (Chrome Blog - blog.chromium.org/2009/12/web-sockets-now-available-in-google.html) I prefer "WebSocket" as that seems to be most common usage and used by the W3C API as well. What do you use ?

  Read the article

• Lost parameter calling WS from PHP

  - by Zyd

  Hi, I'm trying to call this WS from PHP: namespace WsInteropTest { /// <summary> /// Summary description for Service1 /// </summary> [WebService(Namespace = "http://advantage-security.com/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] [System.ComponentModel.ToolboxItem(false)] // To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line. // [System.Web.Script.Services.ScriptService] public class TestWs : System.Web.Services.WebService { [WebMethod] public string HelloWorld(int entero) { return "Hello World " + entero.ToString(); } } } The code i use to call the WS is this: <?php require_once('nusoap\nusoap.php'); $client = new nusoap_client('http://localhost/testws/TestWS.asmx?WSDL'); $params = array( 'entero' => 100 ); $result = $client->call('HelloWorld', array($params), 'http://advantage-security.com/HelloWorld', 'http://advantage-security.com/HelloWorld'); print_r($result); ?> and the result is this Hello World 0 What do you think may be the problem? According to what i've read there is no issues with simple types between .NET (which are converted to standard soap types) and PHP. If it is of use, here it is the WSDL. Thanks in advance <?xml version="1.0" encoding="utf-8" ?> - <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://advantage-security.com/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://advantage-security.com/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"> - <wsdl:types> - <s:schema elementFormDefault="qualified" targetNamespace="http://advantage-security.com/"> - <s:element name="HelloWorld"> - <s:complexType> - <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="entero" type="s:int" /> </s:sequence> </s:complexType> </s:element> - <s:element name="HelloWorldResponse"> - <s:complexType> - <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="HelloWorldResult" type="s:string" /> </s:sequence> </s:complexType> </s:element> </s:schema> </wsdl:types> - <wsdl:message name="HelloWorldSoapIn"> <wsdl:part name="parameters" element="tns:HelloWorld" /> </wsdl:message> - <wsdl:message name="HelloWorldSoapOut"> <wsdl:part name="parameters" element="tns:HelloWorldResponse" /> </wsdl:message> - <wsdl:portType name="TestWsSoap"> - <wsdl:operation name="HelloWorld"> <wsdl:input message="tns:HelloWorldSoapIn" /> <wsdl:output message="tns:HelloWorldSoapOut" /> </wsdl:operation> </wsdl:portType> - <wsdl:binding name="TestWsSoap" type="tns:TestWsSoap"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" /> - <wsdl:operation name="HelloWorld"> <soap:operation soapAction="http://advantage-security.com/HelloWorld" style="document" /> - <wsdl:input> <soap:body use="literal" /> </wsdl:input> - <wsdl:output> <soap:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> - <wsdl:binding name="TestWsSoap12" type="tns:TestWsSoap"> <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" /> - <wsdl:operation name="HelloWorld"> <soap12:operation soapAction="http://advantage-security.com/HelloWorld" style="document" /> - <wsdl:input> <soap12:body use="literal" /> </wsdl:input> - <wsdl:output> <soap12:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> - <wsdl:service name="TestWs"> - <wsdl:port name="TestWsSoap" binding="tns:TestWsSoap"> <soap:address location="http://localhost/testws/TestWS.asmx" /> </wsdl:port> - <wsdl:port name="TestWsSoap12" binding="tns:TestWsSoap12"> <soap12:address location="http://localhost/testws/TestWS.asmx" /> </wsdl:port> </wsdl:service> </wsdl:definitions>

  Read the article

• Solaris X86 AESNI OpenSSL Engine

  - by danx

  Solaris X86 AESNI OpenSSL Engine Cryptography is a major component of secure e-commerce. Since cryptography is compute intensive and adds a significant load to applications, such as SSL web servers (https), crypto performance is an important factor. Providing accelerated crypto hardware greatly helps these applications and will help lead to a wider adoption of cryptography, and lower cost, in e-commerce and other applications. The Intel Westmere microprocessor has six new instructions to acclerate AES encryption. They are called "AESNI" for "AES New Instructions". These are unprivileged instructions, so no "root", other elevated access, or context switch is required to execute these instructions. These instructions are used in a new built-in OpenSSL 1.0 engine available in Solaris 11, the aesni engine. Previous Work Previously, AESNI instructions were introduced into the Solaris x86 kernel and libraries. That is, the "aes" kernel module (used by IPsec and other kernel modules) and the Solaris pkcs11 library (for user applications). These are available in Solaris 10 10/09 (update 8) and above, and Solaris 11. The work here is to add the aesni engine to OpenSSL. X86 AESNI Instructions Intel's Xeon 5600 is one of the processors that support AESNI. This processor is used in the Sun Fire X4170 M2 As mentioned above, six new instructions acclerate AES encryption in processor silicon. The new instructions are: aesenc performs one round of AES encryption. One encryption round is composed of these steps: substitute bytes, shift rows, mix columns, and xor the round key. aesenclast performs the final encryption round, which is the same as above, except omitting the mix columns (which is only needed for the next encryption round). aesdec performs one round of AES decryption aesdeclast performs the final AES decryption round aeskeygenassist Helps expand the user-provided key into a "key schedule" of keys, one per round aesimc performs an "inverse mixed columns" operation to convert the encryption key schedule into a decryption key schedule pclmulqdq Not a AESNI instruction, but performs "carryless multiply" operations to acclerate AES GCM mode. Since the AESNI instructions are implemented in hardware, they take a constant number of cycles and are not vulnerable to side-channel timing attacks that attempt to discern some bits of data from the time taken to encrypt or decrypt the data. Solaris x86 and OpenSSL Software Optimizations Having X86 AESNI hardware crypto instructions is all well and good, but how do we access it? The software is available with Solaris 11 and is used automatically if you are running Solaris x86 on a AESNI-capable processor. AESNI is used internally in the kernel through kernel crypto modules and is available in user space through the PKCS#11 library. For OpenSSL on Solaris 11, AESNI crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "aesni engine." This is in lieu of the extra overhead of going through the Solaris OpenSSL pkcs11 engine, which accesses Solaris crypto and digest operations. Instead, AESNI assembly is included directly in the new aesni engine. Instead of including the aesni engine in a separate library in /lib/openssl/engines/, the aesni engine is "built-in", meaning it is included directly in OpenSSL's libcrypto.so.1.0.0 library. This reduces overhead and the need to manually specify the aesni engine. Since the engine is built-in (that is, in libcrypto.so.1.0.0), the openssl -engine command line flag or API call is not needed to access the engine—the aesni engine is used automatically on AESNI hardware. Ciphers and Digests supported by OpenSSL aesni engine The Openssl aesni engine auto-detects if it's running on AESNI hardware and uses AESNI encryption instructions for these ciphers: AES-128-CBC, AES-192-CBC, AES-256-CBC, AES-128-CFB128, AES-192-CFB128, AES-256-CFB128, AES-128-CTR, AES-192-CTR, AES-256-CTR, AES-128-ECB, AES-192-ECB, AES-256-ECB, AES-128-OFB, AES-192-OFB, and AES-256-OFB. Implementation of the OpenSSL aesni engine The AESNI assembly language routines are not a part of the regular Openssl 1.0.0 release. AESNI is a part of the "HEAD" ("development" or "unstable") branch of OpenSSL, for future release. But AESNI is also available as a separate patch provided by Intel to the OpenSSL project for OpenSSL 1.0.0. A minimal amount of "glue" code in the aesni engine works between the OpenSSL libcrypto.so.1.0.0 library and the assembly functions. The aesni engine code is separate from the base OpenSSL code and requires patching only a few source files to use it. That means OpenSSL can be more easily updated to future versions without losing the performance from the built-in aesni engine. OpenSSL aesni engine Performance Here's some graphs of aesni engine performance I measured by running openssl speed -evp $algorithm where $algorithm is aes-128-cbc, aes-192-cbc, and aes-256-cbc. These are using the 64-bit version of openssl on the same AESNI hardware, a Sun Fire X4170 M2 with a Intel Xeon E5620 @2.40GHz, running Solaris 11 FCS. "Before" is openssl without the aesni engine and "after" is openssl with the aesni engine. The numbers are MBytes/second. OpenSSL aesni engine performance on Sun Fire X4170 M2 (Xeon E5620 @2.40GHz) (Higher is better; "before"=OpenSSL on AESNI without AESNI engine software, "after"=OpenSSL AESNI engine) As you can see the speedup is dramatic for all 3 key lengths and for data sizes from 16 bytes to 8 Kbytes—AESNI is about 7.5-8x faster over hand-coded amd64 assembly (without aesni instructions). Verifying the OpenSSL aesni engine is present The easiest way to determine if you are running the aesni engine is to type "openssl engine" on the command line. No configuration, API, or command line options are needed to use the OpenSSL aesni engine. If you are running on Intel AESNI hardware with Solaris 11 FCS, you'll see this output indicating you are using the aesni engine: intel-westmere $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support If you are running on Intel without AESNI hardware you'll see this output indicating the hardware can't support the aesni engine: intel-nehalem $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support For Solaris on SPARC or older Solaris OpenSSL software, you won't see any aesni engine line at all. Third-party OpenSSL software (built yourself or from outside Oracle) will not have the aesni engine either. Solaris 11 FCS comes with OpenSSL version 1.0.0e. The output of typing "openssl version" should be "OpenSSL 1.0.0e 6 Sep 2011". 64- and 32-bit OpenSSL OpenSSL comes in both 32- and 64-bit binaries. 64-bit executable is now the default, at /usr/bin/openssl, and OpenSSL 64-bit libraries at /lib/amd64/libcrypto.so.1.0.0 and libssl.so.1.0.0 The 32-bit executable is at /usr/bin/i86/openssl and the libraries are at /lib/libcrytpo.so.1.0.0 and libssl.so.1.0.0. Availability The OpenSSL AESNI engine is available in Solaris 11 x86 for both the 64- and 32-bit versions of OpenSSL. It is not available with Solaris 10. You must have a processor that supports AESNI instructions, otherwise OpenSSL will fallback to the older, slower AES implementation without AESNI. Processors that support AESNI include most Westmere and Sandy Bridge class processor architectures. Some low-end processors (such as for mobile/laptop platforms) do not support AESNI. The easiest way to determine if the processor supports AESNI is with the isainfo -v command—look for "amd64" and "aes" in the output: $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu Conclusion The Solaris 11 OpenSSL aesni engine provides easy access to powerful Intel AESNI hardware cryptography, in addition to Solaris userland PKCS#11 libraries and Solaris crypto kernel modules.

  Read the article

• Solaris X86 AESNI OpenSSL Engine

  - by danx

  Solaris X86 AESNI OpenSSL Engine Cryptography is a major component of secure e-commerce. Since cryptography is compute intensive and adds a significant load to applications, such as SSL web servers (https), crypto performance is an important factor. Providing accelerated crypto hardware greatly helps these applications and will help lead to a wider adoption of cryptography, and lower cost, in e-commerce and other applications. The Intel Westmere microprocessor has six new instructions to acclerate AES encryption. They are called "AESNI" for "AES New Instructions". These are unprivileged instructions, so no "root", other elevated access, or context switch is required to execute these instructions. These instructions are used in a new built-in OpenSSL 1.0 engine available in Solaris 11, the aesni engine. Previous Work Previously, AESNI instructions were introduced into the Solaris x86 kernel and libraries. That is, the "aes" kernel module (used by IPsec and other kernel modules) and the Solaris pkcs11 library (for user applications). These are available in Solaris 10 10/09 (update 8) and above, and Solaris 11. The work here is to add the aesni engine to OpenSSL. X86 AESNI Instructions Intel's Xeon 5600 is one of the processors that support AESNI. This processor is used in the Sun Fire X4170 M2 As mentioned above, six new instructions acclerate AES encryption in processor silicon. The new instructions are: aesenc performs one round of AES encryption. One encryption round is composed of these steps: substitute bytes, shift rows, mix columns, and xor the round key. aesenclast performs the final encryption round, which is the same as above, except omitting the mix columns (which is only needed for the next encryption round). aesdec performs one round of AES decryption aesdeclast performs the final AES decryption round aeskeygenassist Helps expand the user-provided key into a "key schedule" of keys, one per round aesimc performs an "inverse mixed columns" operation to convert the encryption key schedule into a decryption key schedule pclmulqdq Not a AESNI instruction, but performs "carryless multiply" operations to acclerate AES GCM mode. Since the AESNI instructions are implemented in hardware, they take a constant number of cycles and are not vulnerable to side-channel timing attacks that attempt to discern some bits of data from the time taken to encrypt or decrypt the data. Solaris x86 and OpenSSL Software Optimizations Having X86 AESNI hardware crypto instructions is all well and good, but how do we access it? The software is available with Solaris 11 and is used automatically if you are running Solaris x86 on a AESNI-capable processor. AESNI is used internally in the kernel through kernel crypto modules and is available in user space through the PKCS#11 library. For OpenSSL on Solaris 11, AESNI crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "aesni engine." This is in lieu of the extra overhead of going through the Solaris OpenSSL pkcs11 engine, which accesses Solaris crypto and digest operations. Instead, AESNI assembly is included directly in the new aesni engine. Instead of including the aesni engine in a separate library in /lib/openssl/engines/, the aesni engine is "built-in", meaning it is included directly in OpenSSL's libcrypto.so.1.0.0 library. This reduces overhead and the need to manually specify the aesni engine. Since the engine is built-in (that is, in libcrypto.so.1.0.0), the openssl -engine command line flag or API call is not needed to access the engine—the aesni engine is used automatically on AESNI hardware. Ciphers and Digests supported by OpenSSL aesni engine The Openssl aesni engine auto-detects if it's running on AESNI hardware and uses AESNI encryption instructions for these ciphers: AES-128-CBC, AES-192-CBC, AES-256-CBC, AES-128-CFB128, AES-192-CFB128, AES-256-CFB128, AES-128-CTR, AES-192-CTR, AES-256-CTR, AES-128-ECB, AES-192-ECB, AES-256-ECB, AES-128-OFB, AES-192-OFB, and AES-256-OFB. Implementation of the OpenSSL aesni engine The AESNI assembly language routines are not a part of the regular Openssl 1.0.0 release. AESNI is a part of the "HEAD" ("development" or "unstable") branch of OpenSSL, for future release. But AESNI is also available as a separate patch provided by Intel to the OpenSSL project for OpenSSL 1.0.0. A minimal amount of "glue" code in the aesni engine works between the OpenSSL libcrypto.so.1.0.0 library and the assembly functions. The aesni engine code is separate from the base OpenSSL code and requires patching only a few source files to use it. That means OpenSSL can be more easily updated to future versions without losing the performance from the built-in aesni engine. OpenSSL aesni engine Performance Here's some graphs of aesni engine performance I measured by running openssl speed -evp $algorithm where $algorithm is aes-128-cbc, aes-192-cbc, and aes-256-cbc. These are using the 64-bit version of openssl on the same AESNI hardware, a Sun Fire X4170 M2 with a Intel Xeon E5620 @2.40GHz, running Solaris 11 FCS. "Before" is openssl without the aesni engine and "after" is openssl with the aesni engine. The numbers are MBytes/second. OpenSSL aesni engine performance on Sun Fire X4170 M2 (Xeon E5620 @2.40GHz) (Higher is better; "before"=OpenSSL on AESNI without AESNI engine software, "after"=OpenSSL AESNI engine) As you can see the speedup is dramatic for all 3 key lengths and for data sizes from 16 bytes to 8 Kbytes—AESNI is about 7.5-8x faster over hand-coded amd64 assembly (without aesni instructions). Verifying the OpenSSL aesni engine is present The easiest way to determine if you are running the aesni engine is to type "openssl engine" on the command line. No configuration, API, or command line options are needed to use the OpenSSL aesni engine. If you are running on Intel AESNI hardware with Solaris 11 FCS, you'll see this output indicating you are using the aesni engine: intel-westmere $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support If you are running on Intel without AESNI hardware you'll see this output indicating the hardware can't support the aesni engine: intel-nehalem $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support For Solaris on SPARC or older Solaris OpenSSL software, you won't see any aesni engine line at all. Third-party OpenSSL software (built yourself or from outside Oracle) will not have the aesni engine either. Solaris 11 FCS comes with OpenSSL version 1.0.0e. The output of typing "openssl version" should be "OpenSSL 1.0.0e 6 Sep 2011". 64- and 32-bit OpenSSL OpenSSL comes in both 32- and 64-bit binaries. 64-bit executable is now the default, at /usr/bin/openssl, and OpenSSL 64-bit libraries at /lib/amd64/libcrypto.so.1.0.0 and libssl.so.1.0.0 The 32-bit executable is at /usr/bin/i86/openssl and the libraries are at /lib/libcrytpo.so.1.0.0 and libssl.so.1.0.0. Availability The OpenSSL AESNI engine is available in Solaris 11 x86 for both the 64- and 32-bit versions of OpenSSL. It is not available with Solaris 10. You must have a processor that supports AESNI instructions, otherwise OpenSSL will fallback to the older, slower AES implementation without AESNI. Processors that support AESNI include most Westmere and Sandy Bridge class processor architectures. Some low-end processors (such as for mobile/laptop platforms) do not support AESNI. The easiest way to determine if the processor supports AESNI is with the isainfo -v command—look for "amd64" and "aes" in the output: $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu Conclusion The Solaris 11 OpenSSL aesni engine provides easy access to powerful Intel AESNI hardware cryptography, in addition to Solaris userland PKCS#11 libraries and Solaris crypto kernel modules.

  Read the article

• Static background noise while using new headset Ubuntu 13.04

  - by ThundLayr

  Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

  Read the article

• Why doesn't my implementation of El Gamal work for long text strings?

  - by angstrom91

  I'm playing with the El Gamal cryptosystem, and my goal is to be able to encipher and decipher long sequences of text. I have come up with a method that works for short sequences, but does not work for long sequences, and I cannot figure out why. El Gamal requires the plaintext to be an integer. I have turned my string into a byte[] using the .getBytes() method for Strings, and then created a BigInteger out of the byte[]. After encryption/decryption, I turn the BigInteger into a byte[] using the .toByteArray() method for BigIntegers, and then create a new String object from the byte[]. This works perfectly when i call ElGamalEncipher with strings up to 129 characters. With 130 or more characters, the output produced is garbled. Can someone suggest how to solve this issue? Is this an issue with my method of turning the string into a BigInteger? If so, is there a better way to turn my string of text into a BigInteger and back? Below is my encipher/decipher code with a program to demonstrate the problem. import java.math.BigInteger; public class Main { static BigInteger P = new BigInteger("15893293927989454301918026303382412" + "2586402937727056707057089173871237566896685250125642378268385842" + "6917261652781627945428519810052550093673226849059197769795219973" + "9423619267147615314847625134014485225178547696778149706043781174" + "2873134844164791938367765407368476144402513720666965545242487520" + "288928241768306844169"); static BigInteger G = new BigInteger("33234037774370419907086775226926852" + "1714093595439329931523707339920987838600777935381196897157489391" + "8360683761941170467795379762509619438720072694104701372808513985" + "2267495266642743136795903226571831274837537691982486936010899433" + "1742996138863988537349011363534657200181054004755211807985189183" + "22832092343085067869"); static BigInteger R = new BigInteger("72294619754760174015019300613282868" + "7219874058383991405961870844510501809885568825032608592198728334" + "7842806755320938980653857292210955880919036195738252708294945320" + "3969657021169134916999794791553544054426668823852291733234236693" + "4178738081619274342922698767296233937873073756955509269717272907" + "8566607940937442517"); static BigInteger A = new BigInteger("32189274574111378750865973746687106" + "3695160924347574569923113893643975328118502246784387874381928804" + "6865920942258286938666201264395694101012858796521485171319748255" + "4630425677084511454641229993833255506759834486100188932905136959" + "7287419551379203001848457730376230681693887924162381650252270090" + "28296990388507680954"); public static void main(String[] args) { FewChars(); System.out.println(); ManyChars(); } public static void FewChars() { //ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) BigInteger[] cipherText = ElGamal.ElGamalEncipher("This is a string " + "of 129 characters which works just fine . This is a string " + "of 129 characters which works just fine . This is a s", P, G, R); System.out.println("This is a string of 129 characters which works " + "just fine . This is a string of 129 characters which works " + "just fine . This is a s"); //ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) String output = ElGamal.ElGamalDecipher(cipherText[0], cipherText[1], A, P); System.out.println("The decrypted text is: " + output); } public static void ManyChars() { //ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) BigInteger[] cipherText = ElGamal.ElGamalEncipher("This is a string " + "of 130 characters which doesn’t work! This is a string of " + "130 characters which doesn’t work! This is a string of ", P, G, R); System.out.println("This is a string of 130 characters which doesn’t " + "work! This is a string of 130 characters which doesn’t work!" + " This is a string of "); //ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) String output = ElGamal.ElGamalDecipher(cipherText[0], cipherText[1], A, P); System.out.println("The decrypted text is: " + output); } } import java.math.BigInteger; import java.security.SecureRandom; public class ElGamal { public static BigInteger[] ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) { // returns a BigInteger[] cipherText // cipherText[0] is c // cipherText[1] is d SecureRandom sr = new SecureRandom(); BigInteger[] cipherText = new BigInteger[2]; BigInteger pText = new BigInteger(plaintext.getBytes()); // 1: select a random integer k such that 1 <= k <= p-2 BigInteger k = new BigInteger(p.bitLength() - 2, sr); // 2: Compute c = g^k(mod p) BigInteger c = g.modPow(k, p); // 3: Compute d= P*r^k = P(g^a)^k(mod p) BigInteger d = pText.multiply(r.modPow(k, p)).mod(p); // C =(c,d) is the ciphertext cipherText[0] = c; cipherText[1] = d; return cipherText; } public static String ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) { //returns the plaintext enciphered as (c,d) // 1: use the private key a to compute the least non-negative residue // of an inverse of (c^a)' (mod p) BigInteger z = c.modPow(a, p).modInverse(p); BigInteger P = z.multiply(d).mod(p); byte[] plainTextArray = P.toByteArray(); return new String(plainTextArray); } }

  Read the article

• Parent Objects

  - by Ali Bahrami

  Support for Parent Objects was added in Solaris 11 Update 1. The following material is adapted from the PSARC arc case, and the Solaris Linker and Libraries Manual. A "plugin" is a shared object, usually loaded via dlopen(), that is used by a program in order to allow the end user to add functionality to the program. Examples of plugins include those used by web browsers (flash, acrobat, etc), as well as mdb and elfedit modules. The object that loads the plugin at runtime is called the "parent object". Unlike most object dependencies, the parent is not identified by name, but by its status as the object doing the load. Historically, building a good plugin is has been more complicated than it should be: A parent and its plugin usually share a 2-way dependency: The plugin provides one or more routines for the parent to call, and the parent supplies support routines for use by the plugin for things like memory allocation and error reporting. It is a best practice to build all objects, including plugins, with the -z defs option, in order to ensure that the object specifies all of its dependencies, and is self contained. However: The parent is usually an executable, which cannot be linked to via the usual library mechanisms provided by the link editor. Even if the parent is a shared object, which could be a normal library dependency to the plugin, it may be desirable to build plugins that can be used by more than one parent, in which case embedding a dependency NEEDED entry for one of the parents is undesirable. The usual way to build a high quality plugin with -z defs uses a special mapfile provided by the parent. This mapfile defines the parent routines, specifying the PARENT attribute (see example below). This works, but is inconvenient, and error prone. The symbol table in the parent already describes what it makes available to plugins — ideally the plugin would obtain that information directly rather than from a separate mapfile. The new -z parent option to ld allows a plugin to link to the parent and access the parent symbol table. This differs from a typical dependency: No NEEDED record is created. The relationship is recorded as a logical connection to the parent, rather than as an explicit object name However, it operates in the same manner as any other dependency in terms of making symbols available to the plugin. When the -z parent option is used, the link-editor records the basename of the parent object in the dynamic section, using the new tag DT_SUNW_PARENT. This is an informational tag, which is not used by the runtime linker to locate the parent, but which is available for diagnostic purposes. The ld(1) manpage documentation for the -z parent option is: -z parent=object Specifies a "parent object", which can be an executable or shared object, against which to link the output object. This option is typically used when creating "plugin" shared objects intended to be loaded by an executable at runtime via the dlopen() function. The symbol table from the parent object is used to satisfy references from the plugin object. The use of the -z parent option makes symbols from the object calling dlopen() available to the plugin. Example For this example, we use a main program, and a plugin. The parent provides a function named parent_callback() for the plugin to call. The plugin provides a function named plugin_func() to the parent: % cat main.c #include <stdio.h> #include <dlfcn.h> #include <link.h> void parent_callback(void) { printf("plugin_func() has called parent_callback()\n"); } int main(int argc, char **argv) { typedef void plugin_func_t(void); void *hdl; plugin_func_t *plugin_func; if (argc != 2) { fprintf(stderr, "usage: main plugin\n"); return (1); } if ((hdl = dlopen(argv[1], RTLD_LAZY)) == NULL) { fprintf(stderr, "unable to load plugin: %s\n", dlerror()); return (1); } plugin_func = (plugin_func_t *) dlsym(hdl, "plugin_func"); if (plugin_func == NULL) { fprintf(stderr, "unable to find plugin_func: %s\n", dlerror()); return (1); } (*plugin_func)(); return (0); } % cat plugin.c #include <stdio.h> extern void parent_callback(void); void plugin_func(void) { printf("parent has called plugin_func() from plugin.so\n"); parent_callback(); } Building this in the traditional manner, without -zdefs: % cc -o main main.c % cc -G -o plugin.so plugin.c % ./main ./plugin.so parent has called plugin_func() from plugin.so plugin_func() has called parent_callback() As noted above, when building any shared object, the -z defs option is recommended, in order to ensure that the object is self contained and specifies all of its dependencies. However, the use of -z defs prevents the plugin object from linking due to the unsatisfied symbol from the parent object: % cc -zdefs -G -o plugin.so plugin.c Undefined first referenced symbol in file parent_callback plugin.o ld: fatal: symbol referencing errors. No output written to plugin.so A mapfile can be used to specify to ld that the parent_callback symbol is supplied by the parent object. % cat plugin.mapfile $mapfile_version 2 SYMBOL_SCOPE { global: parent_callback { FLAGS = PARENT }; }; % cc -zdefs -Mplugin.mapfile -G -o plugin.so plugin.c However, the -z parent option to ld is the most direct solution to this problem, allowing the plugin to actually link against the parent object, and obtain the available symbols from it. An added benefit of using -z parent instead of a mapfile, is that the name of the parent object is recorded in the dynamic section of the plugin, and can be displayed by the file utility: % cc -zdefs -zparent=main -G -o plugin.so plugin.c % elfdump -d plugin.so | grep PARENT [0] SUNW_PARENT 0xcc main % file plugin.so plugin.so: ELF 32-bit LSB dynamic lib 80386 Version 1, parent main, dynamically linked, not stripped % ./main ./plugin.so parent has called plugin_func() from plugin.so plugin_func() has called parent_callback() We can also observe this in elfedit plugins on Solaris systems running Solaris 11 Update 1 or newer: % file /usr/lib/elfedit/dyn.so /usr/lib/elfedit/dyn.so: ELF 32-bit LSB dynamic lib 80386 Version 1, parent elfedit, dynamically linked, not stripped, no debugging information available Related Other Work The GNU ld has an option named --just-symbols that can be used in a similar manner: --just-symbols=filename Read symbol names and their addresses from filename, but do not relocate it or include it in the output. This allows your output file to refer symbolically to absolute locations of memory defined in other programs. You may use this option more than once. -z parent is a higher level operation aimed specifically at simplifying the construction of high quality plugins. Although it employs the same operation, it differs from --just symbols in 2 significant ways: There can only be one parent. The parent is recorded in the created object, and can be displayed by 'file', or other similar tools.

  Read the article

• How to check if a Webcam is broken?

  - by user84812

  I just bought an Acer Aspire 3830TG, it comes with an integrated 1.3M HD Webcam. Before buying it i tried with a bootable Lubuntu usb stick, everything worked well except for the webcam, which i thought I had to tweak. The thing is that it seems the camera should work with no problems in ubuntu. The driver is detected, I try dmesg | grep uvcvideo and the output is [ 12.226174] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002) [ 12.245553] usbcore: registered new interface driver uvcvideo I've also tried using different software (guvcview is black when camera output is MJPG and turns to funny colors when YU12 or YV12, cheese is always black, camorama is always with funny colors...). I should have checked that it was working properly with the default os (windows) but now it's too late for that. I even booted with a official Ubuntu Quantal distro from the usb pen, and the results are the same. so, my question is: is there any way to check that the camera is righmt or broken? So, if it's broken, at least i can go to the shop, show them that it's really broken and get an external webcam for free, or st like that. cheers. UPDATE 1 Thanks, jrp. I run sudo lsinput, and the output info about my video is the following: /dev/input/event6 bustype : BUS_USB vendor : 0x58f product : 0xb002 version : 2 name : "1.3M HD WebCam" phys : "usb-0000:00:1a.0-1.3/button" bits ev : EV_SYN EV_KEY /dev/input/event7 bustype : BUS_HOST vendor : 0x0 product : 0x6 version : 0 name : "Video Bus" phys : "LNXVIDEO/video/input0" bits ev : EV_SYN EV_KEY With this info, i'm not pretty sure about running the luvcview command. If I run luvcview -d /dev/video0 -L, the output is the following: SDL information: Video driver: x11 A window manager is available Device information: Device path: /dev/video0 { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/7, 1/5, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, if i run luvcview by itself, the image is funny (blue and red colors, mainly, with myself in negative state). tx

  Read the article

• Memory Leaks - Objective-C

  - by reising1

  Can anyone help point out memory leaks? I'm getting a bunch within this method and I'm not sure exactly how to fix it. - (NSMutableArray *)getTop5AndOtherKeysAndValuesFromDictionary:(NSMutableDictionary *)dict { NSLog(@"get top 5"); int sumOfAllValues = 0; NSMutableArray *arr = [[[NSMutableArray alloc] init] retain]; for(NSString *key in dict){ NSString *value = [[dict objectForKey:key] retain]; [arr addObject:value]; sumOfAllValues += [value intValue]; } //sort values NSArray *sorted = [[arr sortedArrayUsingFunction:sort context:NULL] retain]; [arr release]; //top 5 values int sumOfTop5 = 0; NSMutableArray *top5 = [[[NSMutableArray alloc] init] retain]; for(int i = 0; i < 5; i++) { int proposedIndex = [sorted count] - 1 - i; if(proposedIndex >= 0) { [top5 addObject:[sorted objectAtIndex:([sorted count] - i - 1)]]; sumOfTop5 += [[sorted objectAtIndex:([sorted count] - i - 1)] intValue]; } } [sorted release]; //copy of all keys NSMutableArray *copyOfKeys = [[[NSMutableArray alloc] init] retain]; for(NSString *key in dict) { [copyOfKeys addObject:key]; } //copy of top 5 values NSMutableArray *copyOfTop5 = [[[NSMutableArray alloc] init] retain]; for(int i = 0; i < [top5 count]; i++) { [copyOfTop5 addObject:[top5 objectAtIndex:i]]; } //get keys with top 5 values NSMutableArray *outputKeys = [[[NSMutableArray alloc] init] retain]; for(int i = 0; i < [top5 count]; i++) { NSString *targetValue = [top5 objectAtIndex:i]; for(int j = 0; j < [copyOfKeys count]; j++) { NSString *key = [copyOfKeys objectAtIndex:j]; NSString *val = [dict objectForKey:key]; if([val isEqualToString:targetValue]) { [outputKeys addObject:key]; [copyOfKeys removeObjectAtIndex:j]; break; } } } [outputKeys addObject:@"Other"]; [top5 addObject:[[NSString stringWithFormat:@"%d",(sumOfAllValues - sumOfTop5)] retain]]; NSMutableArray *output = [[NSMutableArray alloc] init]; [output addObject:outputKeys]; [output addObject:top5]; NSMutableArray *percents = [[NSMutableArray alloc] init]; int sum = sumOfAllValues; float leftOverSum = sum * 1.0f; int count = [top5 count]; float val1, val2, val3, val4, val5; if(count >= 1) val1 = ([[top5 objectAtIndex:0] intValue] * 1.0f)/sum; else val1 = 0.0f; if(count >=2) val2 = ([[top5 objectAtIndex:1] intValue] * 1.0f)/sum; else val2 = 0.0f; if(count >= 3) val3 = ([[top5 objectAtIndex:2] intValue] * 1.0f)/sum; else val3 = 0.0f; if(count >= 4) val4 = ([[top5 objectAtIndex:3] intValue] * 1.0f)/sum; else val4 = 0.0f; if(count >=5) val5 = ([[top5 objectAtIndex:4] intValue] * 1.0f)/sum; else val5 = 0.0f; if(val1 >= .00001f) { NSMutableArray *a1 = [[NSMutableArray alloc] init]; [a1 addObject:[outputKeys objectAtIndex:0]]; [a1 addObject:[top5 objectAtIndex:0]]; [a1 addObject:[NSString stringWithFormat:@"%.01f",(val1*100)]]; [percents addObject:a1]; leftOverSum -= ([[top5 objectAtIndex:0] intValue] * 1.0f); } if(val2 >= .00001f) { NSMutableArray *a2 = [[NSMutableArray alloc] init]; [a2 addObject:[outputKeys objectAtIndex:1]]; [a2 addObject:[top5 objectAtIndex:1]]; [a2 addObject:[NSString stringWithFormat:@"%.01f",(val2*100)]]; [percents addObject:a2]; leftOverSum -= ([[top5 objectAtIndex:1] intValue] * 1.0f); } if(val3 >= .00001f) { NSMutableArray *a3 = [[NSMutableArray alloc] init]; [a3 addObject:[outputKeys objectAtIndex:2]]; [a3 addObject:[top5 objectAtIndex:2]]; [a3 addObject:[NSString stringWithFormat:@"%.01f",(val3*100)]]; [percents addObject:a3]; leftOverSum -= ([[top5 objectAtIndex:2] intValue] * 1.0f); } if(val4 >= .00001f) { NSMutableArray *a4 = [[NSMutableArray alloc] init]; [a4 addObject:[outputKeys objectAtIndex:3]]; [a4 addObject:[top5 objectAtIndex:3]]; [a4 addObject:[NSString stringWithFormat:@"%.01f",(val4*100)]]; [percents addObject:a4]; leftOverSum -= ([[top5 objectAtIndex:3] intValue] * 1.0f); } if(val5 >= .00001f) { NSMutableArray *a5 = [[NSMutableArray alloc] init]; [a5 addObject:[outputKeys objectAtIndex:4]]; [a5 addObject:[top5 objectAtIndex:4]]; [a5 addObject:[NSString stringWithFormat:@"%.01f",(val5*100)]]; [percents addObject:a5]; leftOverSum -= ([[top5 objectAtIndex:4] intValue] * 1.0f); } float valOther = (leftOverSum/sum); if(valOther >= .00001f) { NSMutableArray *a6 = [[NSMutableArray alloc] init]; [a6 addObject:[outputKeys objectAtIndex:5]]; [a6 addObject:[top5 objectAtIndex:5]]; [a6 addObject:[NSString stringWithFormat:@"%.01f",(valOther*100)]]; [percents addObject:a6]; } [output addObject:percents]; NSLog(@"mu - a"); //[arr release]; NSLog(@"mu - b"); //[copyOfKeys release]; NSLog(@"mu - c"); //[copyOfTop5 release]; NSLog(@"mu - c"); //[outputKeys release]; //[top5 release]; //[percents release]; return output; }

  Read the article

• SQL University: What and why of database refactoring

  - by Mladen Prajdic

  This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Tools of the trade This is a second part of the series and in it we’ll take a look at what database refactoring is and why do it. Why refactor a database To know why refactor we first have to know what refactoring actually is. Code refactoring is a process where we change module internals in a way that does not change that module’s input/output behavior. For successful refactoring there is one crucial thing we absolutely must have: Tests. Automated unit tests are the only guarantee we have that we haven’t broken the input/output behavior before refactoring. If you haven’t go back ad read my post on the matter. Then start writing them. Next thing you need is a code module. Those are views, UDFs and stored procedures. By having direct table access we can kiss fast and sweet refactoring good bye. One more point to have a database abstraction layer. And no, ORM’s don’t fall into that category. But also know that refactoring is NOT adding new functionality to your code. Many have fallen into this trap. Don’t be one of them and resist the lure of the dark side. And it’s a strong lure. We developers in general love to add new stuff to our code, but hate fixing our own mistakes or changing existing code for no apparent reason. To be a good refactorer one needs discipline and focus. Now we know that refactoring is all about changing inner workings of existing code. This can be due to performance optimizations, changing internal code workflows or some other reason. This is a typical black box scenario to the outside world. If we upgrade the car engine it still has to drive on the road (preferably faster) and not fly (no matter how cool that would be). Also be aware that white box tests will break when we refactor. What to refactor in a database Refactoring databases doesn’t happen that often but when it does it can include a lot of stuff. Let us look at a few common cases. Adding or removing database schema objects Adding, removing or changing table columns in any way, adding constraints, keys, etc… All of these can be counted as internal changes not visible to the data consumer. But each of these carries a potential input/output behavior change. Dropping a column can result in views not working anymore or stored procedure logic crashing. Adding a unique constraint shows duplicated data that shouldn’t exist. Foreign keys break a truncate table command executed from an application that runs once a month. All these scenarios are very real and can happen. With the proper database abstraction layer fully covered with black box tests we can make sure something like that does not happen (hopefully at all). Changing physical structures Physical structures include heaps, indexes and partitions. We can pretty much add or remove those without changing the data returned by the database. But the performance can be affected. So here we use our performance tests. We do have them, right? Just by adding a single index we can achieve orders of magnitude performance improvement. Won’t that make users happy? But what if that index causes our write operations to crawl to a stop. again we have to test this. There are a lot of things to think about and have tests for. Without tests we can’t do successful refactoring! Fixing bad code We all have some bad code in our systems. We usually refer to that code as code smell as they violate good coding practices. Examples of such code smells are SQL injection, use of SELECT *, scalar UDFs or cursors, etc… Each of those is huge code smell and can result in major code changes. Take SELECT * from example. If we remove a column from a table the client using that SELECT * statement won’t have a clue about that until it runs. Then it will gracefully crash and burn. Not to mention the widely unknown SELECT * view refresh problem that Tomas LaRock (@SQLRockstar on Twitter) and Colin Stasiuk (@BenchmarkIT on Twitter) talk about in detail. Go read about it, it’s informative. Refactoring this includes replacing the * with column names and most likely change to application using the database. Breaking apart huge stored procedures Have you ever seen seen a stored procedure that was 2000 lines long? I have. It’s not pretty. It hurts the eyes and sucks the will to live the next 10 minutes. They are a maintenance nightmare and turn into things no one dares to touch. I’m willing to bet that 100% of time they don’t have a single test on them. Large stored procedures (and functions) are a clear sign that they contain business logic. General opinion on good database coding practices says that business logic has no business in the database. That’s the applications part. Refactoring such behemoths requires writing lots of edge case tests for the stored procedure input/output behavior and then start to refactor it. First we split the logic inside into smaller parts like new stored procedures and UDFs. Those then get called from the master stored procedure. Once we’ve successfully modularized the database code it’s best to transfer that logic into the applications consuming it. This only leaves the stored procedure with common data manipulation logic. Of course this isn’t always possible so having a plethora of performance and behavior unit tests is absolutely necessary to confirm we’ve actually improved the codebase in some way.   Refactoring is not a popular chore amongst developers or managers. The former don’t like fixing old code, the latter can’t see the financial benefit. Remember how we talked about being lousy at estimating future costs in the previous post? But there comes a time when it must be done. Hopefully I’ve given you some ideas how to get started. In the last post of the series we’ll take a look at the tools to use and an example of testing and refactoring.

  Read the article

• Waterfall Model (SDLC) vs. Prototyping Model

  The characters in the fable of the Tortoise and the Hare can easily be used to demonstrate the similarities and differences between the Waterfall and Prototyping software development models. This children fable is about a race between a consistently slow moving but steadfast turtle and an extremely fast but unreliable rabbit. After closely comparing each character’s attributes in correlation with both software development models, a trend seems to appear in that the Waterfall closely resembles the Tortoise in that Waterfall Model is typically a slow moving process that is broken up in to multiple sequential steps that must be executed in a standard linear pattern. The Tortoise can be quoted several times in the story saying “Slow and steady wins the race.” This is the perfect mantra for the Waterfall Model in that this model is seen as a cumbersome and slow moving. Waterfall Model Phases Requirement Analysis & Definition This phase focuses on defining requirements for a project that is to be developed and determining if the project is even feasible. Requirements are collected by analyzing existing systems and functionality in correlation with the needs of the business and the desires of the end users. The desired output for this phase is a list of specific requirements from the business that are to be designed and implemented in the subsequent steps. In addition this phase is used to determine if any value will be gained by completing the project. System Design This phase focuses primarily on the actual architectural design of a system, and how it will interact within itself and with other existing applications. Projects at this level should be viewed at a high level so that actual implementation details are decided in the implementation phase. However major environmental decision like hardware and platform decision are typically decided in this phase. Furthermore the basic goal of this phase is to design an application at the system level in those classes, interfaces, and interactions are defined. Additionally decisions about scalability, distribution and reliability should also be considered for all decisions. The desired output for this phase is a functional  design document that states all of the architectural decisions that have been made in regards to the project as well as a diagrams like a sequence and class diagrams. Software Design This phase focuses primarily on the refining of the decisions found in the functional design document. Classes and interfaces are further broken down in to logical modules based on the interfaces and interactions previously indicated. The output of this phase is a formal design document. Implementation / Coding This phase focuses primarily on implementing the previously defined modules in to units of code. These units are developed independently are intergraded as the system is put together as part of a whole system. Software Integration & Verification This phase primarily focuses on testing each of the units of code developed as well as testing the system as a whole. There are basic types of testing at this phase and they include: Unit Test and Integration Test. Unit Test are built to test the functionality of a code unit to ensure that it preforms its desired task. Integration testing test the system as a whole because it focuses on results of combining specific units of code and validating it against expected results. The output of this phase is a test plan that includes test with expected results and actual results. System Verification This phase primarily focuses on testing the system as a whole in regards to the list of project requirements and desired operating environment. Operation & Maintenance his phase primarily focuses on handing off the competed project over to the customer so that they can verify that all of their requirements have been met based on their original requirements. This phase will also validate the correctness of their requirements and if any changed need to be made. In addition, any problems not resolved in the previous phase will be handled in this section. The Waterfall Model’s linear and sequential methodology does offer a project certain advantages and disadvantages. Advantages of the Waterfall Model Simplistic to implement and execute for projects and/or company wide Limited demand on resources Large emphasis on documentation Disadvantages of the Waterfall Model Completed phases cannot be revisited regardless if issues arise within a project Accurate requirement are never gather prior to the completion of the requirement phase due to the lack of clarification in regards to client’s desires. Small changes or errors that arise in applications may cause additional problems The client cannot change any requirements once the requirements phase has been completed leaving them no options for changes as they see their requirements changes as the customers desires change. Excess documentation Phases are cumbersome and slow moving Learn more about the Major Process in the Sofware Development Life Cycle and Waterfall Model. Conversely, the Hare shares similar traits with the prototyping software development model in that ideas are rapidly converted to basic working examples and subsequent changes are made to quickly align the project with customers desires as they are formulated and as software strays from the customers vision. The basic concept of prototyping is to eliminate the use of well-defined project requirements. Projects are allowed to grow as the customer needs and request grow. Projects are initially designed according to basic requirements and are refined as requirement become more refined. This process allows customer to feel their way around the application to ensure that they are developing exactly what they want in the application This model also works well for determining the feasibility of certain approaches in regards to an application. Prototypes allow for quickly developing examples of implementing specific functionality based on certain techniques. Advantages of Prototyping Active participation from users and customers Allows customers to change their mind in specifying requirements Customers get a better understanding of the system as it is developed Earlier bug/error detection Promotes communication with customers Prototype could be used as final production Reduced time needed to develop applications compared to the Waterfall method Disadvantages of Prototyping Promotes constantly redefining project requirements that cause major system rewrites Potential for increased complexity of a system as scope of the system expands Customer could believe the prototype as the working version. Implementation compromises could increase the complexity when applying updates and or application fixes When companies trying to decide between the Waterfall model and Prototype model they need to evaluate the benefits and disadvantages for both models. Typically smaller companies or projects that have major time constraints typically head for more of a Prototype model approach because it can reduce the time needed to complete the project because there is more of a focus on building a project and less on defining requirements and scope prior to the start of a project. On the other hand, Companies with well-defined requirements and time allowed to generate proper documentation should steer towards more of a waterfall model because they are in a position to obtain clarified requirements and have to design and optimal solution prior to the start of coding on a project.

  Read the article

• ApiChange Is Released!

  - by Alois Kraus

  I have been working on little tool to simplify my life and perhaps yours as developer as well. It is basically a command line tool that allows you to execute queries on your compiled .NET code base. The main purpose is to find out how big the impact of an api change would be if you changed this or that.  Now you can do high level operations like Diff public types for breaking changes. Who uses a method? Who uses a type? Who uses implements an interface? Who references me? What format has the binary  (32/64, Managed C++, Pure IL, Unmanaged)? Search for all event subscribers and unsubscribers. A unique feature is to check for event subscription imbalances. Forgotten event subscriptions are the 90% cause of managed memory leaks. It is done at a per class level. If one class does subscribe to one event more often than it does unsubscribe it is treated as possible event subscription imbalance. Another unique ability is to search for users of string literals which allows you to track users of a string constant which is not possible otherwise. For incremental builds the ShowRebuildTargets command can be used to identify the dependant targets that need a rebuild after you did compile one assembly. It has some heuristics in place to determine the impact of breaking changes and finds out which targets need to be recompiled as well. It has a ton of other features and a an API to access these things programmatically so you can build upon these simple queries create even better tools. Perhaps we get a Visual Studio plug in? You can download it from CodePlex here. It works via XCopy deployment. Simply let it run and check the command line help out. The best feature in my opinion is that the output of nearly all commands can be piped to Excel for further analysis. Since it does read also the pdbs it can show you the source file name and line number as well for all matches. The following picture shows the output of a –WhousesType query. The following command checks where type from BaseLibraryV1.dll are used inside DependantLibV1.dll. All matches are printed out with the reason and matching item along with file and line number. There is even a hyper link to the match which will open Visual Studio. ApiChange -whousestype "*" BaseLibraryV1.dll -in DependantLibV1.dll –excel The "*” is the actual query which means all types. The syntax is the same like in C# just that placeholders are allowed ;-). More info's can be found at the Codeplex Documentation.     The tool was developed in a TDD style manner which means that it is heavily tested and already used by a quite large user base inside the company I do work for. Luckily for you I got the permission to make it public so you take advantage of it. It is fully instrumented with tracing. If you find bugs simply add the –trace command line switch to find out what is failing and send me the output. How is it done? Your first guess might be that it uses reflection. Wrong. It is based on Mono Cecil a free IL parser with a fantastic API to access all internals of a managed assembly. The speed is awesome and to make it even faster I did make the tool heavily multi threaded. The query above did execute in 1.8s with the Excel output. On a rather slow machine I can analyze over 1500 assemblies in less than 40s with a very low memory consumption. The true power of Mono Cecil is that I can load an assembly like any other data file. I have no problems unloading a file but if I would have used reflection I would need to unload a whole AppDomain just to get rid of one assembly in my memory. Just to give you a glimpse how ApiChange.Api.dll can be used I show you one of the unit tests:           public void Can_Find_GenericMethodInvocations_With_Type_Parameters()         { // 1. Create an aggregator to collect our matches             UsageQueryAggregator agg = new UsageQueryAggregator();   // 2. This is the type we want to search for. Load it via the type query             var decimalType = TypeQuery.GetTypeByName(TestConstants.MscorlibAssembly, "System.Decimal");   // 3. register the type query which searches for uses of the Decimal type             new WhoUsesType(agg, decimalType);   // 4. Search for all users of the Decimal type in the DependandLibV1Assembly             agg.Analyze(TestConstants.DependandLibV1Assembly);   // Extract matches and assert             Assert.AreEqual(2, agg.MethodMatches.Count, "Method match count");             Assert.AreEqual("UseGenericMethod", agg.MethodMatches[0].Match.Name);             Assert.AreEqual("UseGenericMethod", agg.MethodMatches[1].Match.Name);         } Many thanks go from here to Jb Evian for the creation of Mono.Cecil. Without this fantastic piece of code it would have been much much harder. There are other options around like the Common Compiler Infrastructure  Metadata Api which should do the same thing but it was not a real option since the Microsoft reader did fail on even simple assemblies (at least in September 2009 this was the case). Besides this I found the CCI Apis much harder to use. The only real competitor was Reflector which does support many things but does not let me access his cool high level analyze commands. So I decided to dig into the IL specs and as a result you can query your compiled binaries from the command line or programmatically. The best thing is you try it out for yourself and give me some feedback what you miss. If you want to contribute or have a cool idea what should be added drop me a mail at A Kraus1@___No [email protected]. There is much more inside the tool I did not talk about it (yet).

  Read the article

• MapRedux - PowerShell and Big Data

  - by Dittenhafer Solutions

  MapRedux – #PowerShell and #Big Data Have you been hearing about “big data”, “map reduce” and other large scale computing terms over the past couple of years and been curious to dig into more detail? Have you read some of the Apache Hadoop online documentation and unfortunately concluded that it wasn't feasible to setup a “test” hadoop environment on your machine? More recently, I have read about some of Microsoft’s work to enable Hadoop on the Azure cloud. Being a "Microsoft"-leaning technologist, I am more inclinded to be successful with experimentation when on the Windows platform. Of course, it is not that I am "religious" about one set of technologies other another, but rather more experienced. Anyway, within the past couple of weeks I have been thinking about PowerShell a bit more as the 2012 PowerShell Scripting Games approach and it occured to me that PowerShell's support for Windows Remote Management (WinRM), and some other inherent features of PowerShell might lend themselves particularly well to a simple implementation of the MapReduce framework. I fired up my PowerShell ISE and started writing just to see where it would take me. Quite simply, the ScriptBlock feature combined with the ability of Invoke-Command to create remote jobs on networked servers provides much of the plumbing of a distributed computing environment. There are some limiting factors of course. Microsoft provided some default settings which prevent PowerShell from taking over a network without administrative approval first. But even with just one adjustment, a given Windows-based machine can become a node in a MapReduce-style distributed computing environment. Ok, so enough introduction. Let's talk about the code. First, any machine that will participate as a remote "node" will need WinRM enabled for remote access, as shown below. This is not exactly practical for hundreds of intended nodes, but for one (or five) machines in a test environment it does just fine. C:> winrm quickconfig WinRM is not set up to receive requests on this machine. The following changes must be made: Set the WinRM service type to auto start. Start the WinRM service. Make these changes [y/n]? y Alternatively, you could take the approach described in the Remotely enable PSRemoting post from the TechNet forum and use PowerShell to create remote scheduled tasks that will call Enable-PSRemoting on each intended node. Invoke-MapRedux Moving on, now that you have one or more remote "nodes" enabled, you can consider the actual Map and Reduce algorithms. Consider the following snippet: $MyMrResults = Invoke-MapRedux -MapReduceItem $Mr -ComputerName $MyNodes -DataSet $dataset -Verbose Invoke-MapRedux takes an instance of a MapReduceItem which references the Map and Reduce scriptblocks, an array of computer names which are the remote nodes, and the initial data set to be processed. As simple as that, you can start working with concepts of big data and the MapReduce paradigm. Now, how did we get there? I have published the initial version of my PsMapRedux PowerShell Module on GitHub. The PsMapRedux module provides the Invoke-MapRedux function described above. Feel free to browse the underlying code and even contribute to the project! In a later post, I plan to show some of the inner workings of the module, but for now let's move on to how the Map and Reduce functions are defined. Map Both the Map and Reduce functions need to follow a prescribed prototype. The prototype for a Map function in the MapRedux module is as follows. A simple scriptblock that takes one PsObject parameter and returns a hashtable. It is important to note that the PsObject $dataset parameter is a MapRedux custom object that has a "Data" property which offers an array of data to be processed by the Map function. $aMap = { Param ( [PsObject] $dataset ) # Indicate the job is running on the remote node. Write-Host ($env:computername + "::Map"); # The hashtable to return $list = @{}; # ... Perform the mapping work and prepare the $list hashtable result with your custom PSObject... # ... The $dataset has a single 'Data' property which contains an array of data rows # which is a subset of the originally submitted data set. # Return the hashtable (Key, PSObject) Write-Output $list; } Reduce Likewise, with the Reduce function a simple prototype must be followed which takes a $key and a result $dataset from the MapRedux's partitioning function (which joins the Map results by key). Again, the $dataset is a MapRedux custom object that has a "Data" property as described in the Map section. $aReduce = { Param ( [object] $key, [PSObject] $dataset ) Write-Host ($env:computername + "::Reduce - Count: " + $dataset.Data.Count) # The hashtable to return $redux = @{}; # Return Write-Output $redux; } All Together Now When everything is put together in a short example script, you implement your Map and Reduce functions, query for some starting data, build the MapReduxItem via New-MapReduxItem and call Invoke-MapRedux to get the process started: # Import the MapRedux and SQL Server providers Import-Module "MapRedux" Import-Module “sqlps” -DisableNameChecking # Query the database for a dataset Set-Location SQLSERVER:\sql\dbserver1\default\databases\myDb $query = "SELECT MyKey, Date, Value1 FROM BigData ORDER BY MyKey"; Write-Host "Query: $query" $dataset = Invoke-SqlCmd -query $query # Build the Map function $MyMap = { Param ( [PsObject] $dataset ) Write-Host ($env:computername + "::Map"); $list = @{}; foreach($row in $dataset.Data) { # Write-Host ("Key: " + $row.MyKey.ToString()); if($list.ContainsKey($row.MyKey) -eq $true) { $s = $list.Item($row.MyKey); $s.Sum += $row.Value1; $s.Count++; } else { $s = New-Object PSObject; $s | Add-Member -Type NoteProperty -Name MyKey -Value $row.MyKey; $s | Add-Member -type NoteProperty -Name Sum -Value $row.Value1; $list.Add($row.MyKey, $s); } } Write-Output $list; } $MyReduce = { Param ( [object] $key, [PSObject] $dataset ) Write-Host ($env:computername + "::Reduce - Count: " + $dataset.Data.Count) $redux = @{}; $count = 0; foreach($s in $dataset.Data) { $sum += $s.Sum; $count += 1; } # Reduce $redux.Add($s.MyKey, $sum / $count); # Return Write-Output $redux; } # Create the item data $Mr = New-MapReduxItem "My Test MapReduce Job" $MyMap $MyReduce # Array of processing nodes... $MyNodes = ("node1", "node2", "node3", "node4", "localhost") # Run the Map Reduce routine... $MyMrResults = Invoke-MapRedux -MapReduceItem $Mr -ComputerName $MyNodes -DataSet $dataset -Verbose # Show the results Set-Location C:\ $MyMrResults | Out-GridView Conclusion I hope you have seen through this article that PowerShell has a significant infrastructure available for distributed computing. While it does take some code to expose a MapReduce-style framework, much of the work is already done and PowerShell could prove to be the the easiest platform to develop and run big data jobs in your corporate data center, potentially in the Azure cloud, or certainly as an academic excerise at home or school. Follow me on Twitter to stay up to date on the continuing progress of my Powershell MapRedux module, and thanks for reading! Daniel

  Read the article

• When building a web Application project, TFS 2008 Builds two spearate projects in the _PublishedFold

  - by Steve Johnson

  Hi all, I am trying to a perform build automation on one of web application projects built using VS 2008. The _PublishedWebSites contains two folders: Web and Deploy. I just want the TFS 2008 to generate only the Deploy Folder and Not the Web Folder. Here is my TFSBuild.proj File <Project ToolsVersion="3.5" DefaultTargets="Compile" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildExtensionsPath)\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets" /> <Import Project="$(MSBuildExtensionsPath)\Microsoft\WebDeployment\v9.0\Microsoft.WebDeployment.targets" /> <ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|AnyCPU"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>Any CPU</PlatformToBuild> </ConfigurationToBuild> </ItemGroup> <!--<ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|x64"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>x64</PlatformToBuild> </ConfigurationToBuild> </ItemGroup>--> <ItemGroup> <AdditionalReferencePath Include="C:\3PR" /> </ItemGroup> <Target Name="GetCopyToOutputDirectoryItems" Outputs="@(AllItemsFullPathWithTargetPath)" DependsOnTargets="AssignTargetPaths;_SplitProjectReferencesByFileExistence"> <!-- Get items from child projects first. --> <MSBuild Projects="@(_MSBuildProjectReferenceExistent)" Targets="GetCopyToOutputDirectoryItems" Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform)" Condition="'@(_MSBuildProjectReferenceExistent)'!=''"> <Output TaskParameter="TargetOutputs" ItemName="_AllChildProjectItemsWithTargetPathNotFiltered"/> </MSBuild> <!-- Remove duplicates. --> <RemoveDuplicates Inputs="@(_AllChildProjectItemsWithTargetPathNotFiltered)"> <Output TaskParameter="Filtered" ItemName="_AllChildProjectItemsWithTargetPath"/> </RemoveDuplicates> <!-- Target outputs must be full paths because they will be consumed by a different project. --> <CreateItem Include="@(_AllChildProjectItemsWithTargetPath->'%(FullPath)')" Exclude= "$(BuildProjectFolderPath)/../../Development/Main/Web/Bin*.pdb; *.refresh; *.vshost.exe; *.manifest; *.compiled; $(BuildProjectFolderPath)/../../Development/Main/Web/Auth/MySoftware.dll; $(BuildProjectFolderPath)/../../Development/Main/Web/BinApp_Web_*.dll;" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always' or '%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'" > <Output TaskParameter="Include" ItemName="AllItemsFullPathWithTargetPath"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectoryAlways" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always'"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectory" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'"/> </CreateItem> </Target> <!-- To modify your build process, add your task inside one of the targets below and uncomment it. Other similar extension points exist, see Microsoft.WebDeployment.targets. <Target Name="BeforeBuild"> </Target> <Target Name="BeforeMerge"> </Target> <Target Name="AfterMerge"> </Target> <Target Name="AfterBuild"> </Target> --> </Project> I want to build everything that the builtin Deploy project is doing for me. But i dont want the generated Web Project as it conatains App_Web_xxxx.dll assemblies instead of a single compiled assembly. Please help. Thanks

  Read the article

• When building a web application project, TFS 2008 builds two separate projects in _PublishedFolder.

  - by Steve Johnson

  I am trying to perform build automation on one of my web application projects built using VS 2008. The _PublishedWebSites contains two folders: Web and Deploy. I want TFS 2008 to generate only the deploy folder and not the web folder. Here is my TFSBuild.proj file: <Project ToolsVersion="3.5" DefaultTargets="Compile" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildExtensionsPath)\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets" /> <Import Project="$(MSBuildExtensionsPath)\Microsoft\WebDeployment\v9.0\Microsoft.WebDeployment.targets" /> <ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|AnyCPU"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>Any CPU</PlatformToBuild> </ConfigurationToBuild> </ItemGroup> <!--<ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|x64"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>x64</PlatformToBuild> </ConfigurationToBuild> </ItemGroup>--> <ItemGroup> <AdditionalReferencePath Include="C:\3PR" /> </ItemGroup> <Target Name="GetCopyToOutputDirectoryItems" Outputs="@(AllItemsFullPathWithTargetPath)" DependsOnTargets="AssignTargetPaths;_SplitProjectReferencesByFileExistence"> <!-- Get items from child projects first. --> <MSBuild Projects="@(_MSBuildProjectReferenceExistent)" Targets="GetCopyToOutputDirectoryItems" Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform)" Condition="'@(_MSBuildProjectReferenceExistent)'!=''"> <Output TaskParameter="TargetOutputs" ItemName="_AllChildProjectItemsWithTargetPathNotFiltered"/> </MSBuild> <!-- Remove duplicates. --> <RemoveDuplicates Inputs="@(_AllChildProjectItemsWithTargetPathNotFiltered)"> <Output TaskParameter="Filtered" ItemName="_AllChildProjectItemsWithTargetPath"/> </RemoveDuplicates> <!-- Target outputs must be full paths because they will be consumed by a different project. --> <CreateItem Include="@(_AllChildProjectItemsWithTargetPath->'%(FullPath)')" Exclude= "$(BuildProjectFolderPath)/../../Development/Main/Web/Bin*.pdb; *.refresh; *.vshost.exe; *.manifest; *.compiled; $(BuildProjectFolderPath)/../../Development/Main/Web/Auth/MySoftware.dll; $(BuildProjectFolderPath)/../../Development/Main/Web/BinApp_Web_*.dll;" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always' or '%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'" > <Output TaskParameter="Include" ItemName="AllItemsFullPathWithTargetPath"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectoryAlways" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always'"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectory" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'"/> </CreateItem> </Target> <!-- To modify your build process, add your task inside one of the targets below and uncomment it. Other similar extension points exist, see Microsoft.WebDeployment.targets. <Target Name="BeforeBuild"> </Target> <Target Name="BeforeMerge"> </Target> <Target Name="AfterMerge"> </Target> <Target Name="AfterBuild"> </Target> --> </Project> I want to build everything that the builtin Deploy project is doing for me. But I don't want the generated web project as it contains App_Web_xxxx.dll assemblies instead of a single compiled assembly. How can I do this?

  Read the article

• PHP Form checkbox question

  - by Sef

  Hello, I have a form that takes the following inputs: Name: IBM Surface(in m^2): 9 Floor: (Checkbox1) Phone: (Checkbox2) Network: (Checkbox3) Button to send to a next php page. All those values above are represented in a table when i press the submit button. The first two (name and surname) are properly displayed in the table. The problem is with the checkboxes. If i select the first checkbox the value in the table should be presented with 1. If its not selected the value in the table should be empty. echo "<td>$Name</td>"; // works properly echo "<td>$Surface</td>"; // works properly echo "<td>....no idea for the checkboxes</td>; Some part of my php code with the variables: <?php if (!empty($_POST)) { $standnaam = $_POST["name"]; $oppervlakte = $_POST["surface"]; $verdieping = $_POST["floor"]; $telefoon = $_POST["telefoon"]; $netwerk = $_POST["netwerk"]; if (is_numeric($surface)) { $_SESSION["name"]=$name; $_SESSION["surface"]=$surface; header("Location:ExpoOverzicht.php"); } else { echo "<h1>Wrong input, Pleasee fill in again</h1>"; } if(!empty($floor) && ($phone) && ($network)) { $_SESSION["floor"]=$floor; $_SESSION["phone"]=$phone; $_SESSION["network"]=$network; header("Location:ExpoOverzicht.php"); } } ?> Second page with table: <?php $name= $_SESSION["name"]; $surface= $_SESSION["surface"]; $floor= $_SESSION["floor"]; $phone= $_SESSION["phone"]; $network= $_SESSION["network"]; echo "<table class=\"tableExpo\">"; echo "<th>name</th>"; echo "<th>surface</th>"; echo "<th>floor</th>"; echo "<th>phone</th>"; echo "<th>network</th>"; echo "<th>total price</th>"; for($i=0; $i <= $_SESSION["name"]; $i++) { echo "<tr>"; echo "<td>$name</td>"; // gives right output echo "<td>$surface</td>"; // gives right output echo "<td>...</td>"; //wrong output (ment for checkbox 1) echo "<td>...</td>"; //wrong output (ment for checkbox 2) echo "<td>...</td>"; //wrong output (ment for checkbox 3) echo "<td>....</td>"; echo "</tr>;"; } echo "</table>"; <form action="<?php echo $_SERVER["PHP_SELF"]; ?>" method="post" id="form1"> <h1>Vul de gegevens in</h1> <table> <tr> <td>Name:</td> <td><input type="text" name="name" size="18"/></td> </tr> <tr> <td>Surface(in m^2):</td> <td><input type="text" name="surface" size="6"/></td> </tr> <tr> <td>Floor:</td> <td><input type="checkbox" name="floor" value="floor"/></td> </tr> <tr> <td>Phone:</td> <td><input type="checkbox" name="phone" value="phone"/></td> </tr> <tr> <td>Network:</td> <td><input type="checkbox" name="network" value="network"/></td> </tr> <tr> <td><input type="submit" name="verzenden" value="Verzenden"/></td> </tr> </table> There might be a few spelling mistakes since i had to translate it. Best regards.

  Read the article

• ??Recovery Manager (RMAN)??

  - by ??

  Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-font-kerning:1.0pt;} ????,RMAN?Oracle?????????????????????,?RMAN?????????????????,?????????????? ?????,RMAN????? RMAN???????????? RMAN???/?????????? ???????????? ????1487262.1???????????,?????RMAN??/????????4??????: ???? ???? ???? ??????? ???????????????,???????SQLPLUS???,???????????“DD-MON-RR HH24:MI:SS”???????,??????????? ??: SQL>spool monitor.out SQL>@monitor '06-aug-12 16:38:03' ?????RMAN???????????,?????????,?????? - ???????????????????,?????RMAN?????? ???????4??????????????? ???? ??DBA????????V$SESSION_LONGOPS???????????????????????,?????????????????? ??: SID CH CONTEXT SOFAR TOTALWORK % Complete --- -- ------- ------ ---------- ---------- 16 t1 1 181950 1186752 15.33 148 t2 1 249722 422400 59.12 ??: - ???????????????? - ??????????????? ???? ??????RMAN?????????????????????????????????????????????????????????Oracle???????????????????????? ??: SID CH SEQ# EVENT STATE SECONDS --- -- ---- --------------------------------- ------- ------- 16 t1 5735 RMAN backup & recovery I/O WAITING 10 143 8200 SQL*Net message from client WAITING 258.83 148 t2 7941 Backup: MML create a backup piece WAITING 196.13 ?????????T2???????????????,???????T2????????????????? ??: -?CH??????RMAN???,?Rman???????????,????????? -??SEQ#?????????,???????? -?????????,??????SEQ#???? -????????????????RMAN backup & recovery I/O'??????????????IO???? ???? ???????????????????????????????,???????backup_tape_io_slaves=TRUE,?????????????????? ??: SID CH STATUS OPEN_TIME SOFAR Mb TOTMB IO_COUNT % Complete TYPE FILENAME --- -- ----------- ------------------ -------- ------ ---------- -------- ------ ------------- 19 t1 FINISHED 02-aug-12 17:28:42 567.5 567.5 569 100.00 INPUT users01.dbf 19 t1 IN PROGRESS 02-aug-12 17:28:42 3489.99 8704 3490 40.10 INPUT sh.dbf 19 t1 IN PROGRESS 02-aug-12 17:28:42 3778 15113 OUTPUT kvnhlb22_1_1 20 t2 FINISHED 02-aug-12 17:28:38 740 740 742 100.00 INPUT system01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 880 880 882 100.00 INPUT sysaux01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 1680 1680 1682 100.00 INPUT undotbs01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 3007.25 12029 OUTPUT l0nhlb23_1_1 ??: - ???????????????,??RMAN??????IO,??????????IO??,??(Document 360443.1 RMAN Backup Performance) - ?? IO_COUNT??????????? ??????? ?????,????????, ????????????v$backup_sync_io ?????????. ??: SID CH FILENAME TYPE STATUS BSZ BFC OPEN IO_COUNT --- -- ------------ ------ ----------- ------ --- ------------------ -------- 16 t1 ksnhla1b_1_1 OUTPUT IN PROGRESS 262144 4 02-aug-12 17:12:20 1092 148 t2 ktnhla1c_1_1 OUTPUT IN PROGRESS 262144 4 02-aug-12 17:12:15 2968 ??: -?????????????????,??RMAN??????IO -?? IO_COUNT?????????? -??IO_COUNT ????, ???IO_COUNT ????????????,???????????????,????????????? ????: ??????????????? Document 1487262.1 Script to monitor RMAN Backup and Restore Operations Document 144640.1   RMAN: Monitoring Recovery Manager Jobs Document 360443.1   RMAN Backup Performance Document 740911.1   RMAN Restore Performance ??,?????My Oracle Support Database Backup and Recovery community ?Oracle?????????????/??????

  Read the article

• Creating a dynamic proxy generator – Part 1 – Creating the Assembly builder, Module builder and cach

  - by SeanMcAlinden

  I’ve recently started a project with a few mates to learn the ins and outs of Dependency Injection, AOP and a number of other pretty crucial patterns of development as we’ve all been using these patterns for a while but have relied totally on third part solutions to do the magic. We thought it would be interesting to really get into the details by rolling our own IoC container and hopefully learn a lot on the way, and you never know, we might even create an excellent framework. The open source project is called Rapid IoC and is hosted at http://rapidioc.codeplex.com/ One of the most interesting tasks for me is creating the dynamic proxy generator for enabling Aspect Orientated Programming (AOP). In this series of articles, I’m going to track each step I take for creating the dynamic proxy generator and I’ll try my best to explain what everything means - mainly as I’ll be using Reflection.Emit to emit a fair amount of intermediate language code (IL) to create the proxy types at runtime which can be a little taxing to read. It’s worth noting that building the proxy is without a doubt going to be slightly painful so I imagine there will be plenty of areas I’ll need to change along the way. Anyway lets get started…   Part 1 - Creating the Assembly builder, Module builder and caching mechanism Part 1 is going to be a really nice simple start, I’m just going to start by creating the assembly, module and type caches. The reason we need to create caches for the assembly, module and types is simply to save the overhead of recreating proxy types that have already been generated, this will be one of the important steps to ensure that the framework is fast… kind of important as we’re calling the IoC container ‘Rapid’ – will be a little bit embarrassing if we manage to create the slowest framework. The Assembly builder The assembly builder is what is used to create an assembly at runtime, we’re going to have two overloads, one will be for the actual use of the proxy generator, the other will be mainly for testing purposes as it will also save the assembly so we can use Reflector to examine the code that has been created. Here’s the code: DynamicAssemblyBuilder using System; using System.Reflection; using System.Reflection.Emit; namespace Rapid.DynamicProxy.Assembly {     /// <summary>     /// Class for creating an assembly builder.     /// </summary>     internal static class DynamicAssemblyBuilder     {         #region Create           /// <summary>         /// Creates an assembly builder.         /// </summary>         /// <param name="assemblyName">Name of the assembly.</param>         public static AssemblyBuilder Create(string assemblyName)         {             AssemblyName name = new AssemblyName(assemblyName);               AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly(                     name, AssemblyBuilderAccess.Run);               DynamicAssemblyCache.Add(assembly);               return assembly;         }           /// <summary>         /// Creates an assembly builder and saves the assembly to the passed in location.         /// </summary>         /// <param name="assemblyName">Name of the assembly.</param>         /// <param name="filePath">The file path.</param>         public static AssemblyBuilder Create(string assemblyName, string filePath)         {             AssemblyName name = new AssemblyName(assemblyName);               AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly(                     name, AssemblyBuilderAccess.RunAndSave, filePath);               DynamicAssemblyCache.Add(assembly);               return assembly;         }           #endregion     } }   So hopefully the above class is fairly explanatory, an AssemblyName is created using the passed in string for the actual name of the assembly. An AssemblyBuilder is then constructed with the current AppDomain and depending on the overload used, it is either just run in the current context or it is set up ready for saving. It is then added to the cache.   DynamicAssemblyCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions;   namespace Rapid.DynamicProxy.Assembly {     /// <summary>     /// Cache for storing the dynamic assembly builder.     /// </summary>     internal static class DynamicAssemblyCache     {         #region Declarations           private static object syncRoot = new object();         internal static AssemblyBuilder Cache = null;           #endregion           #region Adds a dynamic assembly to the cache.           /// <summary>         /// Adds a dynamic assembly builder to the cache.         /// </summary>         /// <param name="assemblyBuilder">The assembly builder.</param>         public static void Add(AssemblyBuilder assemblyBuilder)         {             lock (syncRoot)             {                 Cache = assemblyBuilder;             }         }           #endregion           #region Gets the cached assembly                  /// <summary>         /// Gets the cached assembly builder.         /// </summary>         /// <returns></returns>         public static AssemblyBuilder Get         {             get             {                 lock (syncRoot)                 {                     if (Cache != null)                     {                         return Cache;                     }                 }                   throw new RapidDynamicProxyAssertionException(AssertionResources.NoAssemblyInCache);             }         }           #endregion     } } The cache is simply a static property that will store the AssemblyBuilder (I know it’s a little weird that I’ve made it public, this is for testing purposes, I know that’s a bad excuse but hey…) There are two methods for using the cache – Add and Get, these just provide thread safe access to the cache.   The Module Builder The module builder is required as the create proxy classes will need to live inside a module within the assembly. Here’s the code: DynamicModuleBuilder using System.Reflection.Emit; using Rapid.DynamicProxy.Assembly; namespace Rapid.DynamicProxy.Module {     /// <summary>     /// Class for creating a module builder.     /// </summary>     internal static class DynamicModuleBuilder     {         /// <summary>         /// Creates a module builder using the cached assembly.         /// </summary>         public static ModuleBuilder Create()         {             string assemblyName = DynamicAssemblyCache.Get.GetName().Name;               ModuleBuilder moduleBuilder = DynamicAssemblyCache.Get.DefineDynamicModule                 (assemblyName, string.Format("{0}.dll", assemblyName));               DynamicModuleCache.Add(moduleBuilder);               return moduleBuilder;         }     } } As you can see, the module builder is created on the assembly that lives in the DynamicAssemblyCache, the module is given the assembly name and also a string representing the filename if the assembly is to be saved. It is then added to the DynamicModuleCache. DynamicModuleCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Module {     /// <summary>     /// Class for storing the module builder.     /// </summary>     internal static class DynamicModuleCache     {         #region Declarations           private static object syncRoot = new object();         internal static ModuleBuilder Cache = null;           #endregion           #region Add           /// <summary>         /// Adds a dynamic module builder to the cache.         /// </summary>         /// <param name="moduleBuilder">The module builder.</param>         public static void Add(ModuleBuilder moduleBuilder)         {             lock (syncRoot)             {                 Cache = moduleBuilder;             }         }           #endregion           #region Get           /// <summary>         /// Gets the cached module builder.         /// </summary>         /// <returns></returns>         public static ModuleBuilder Get         {             get             {                 lock (syncRoot)                 {                     if (Cache != null)                     {                         return Cache;                     }                 }                   throw new RapidDynamicProxyAssertionException(AssertionResources.NoModuleInCache);             }         }           #endregion     } }   The DynamicModuleCache is very similar to the assembly cache, it is simply a statically stored module with thread safe Add and Get methods.   The DynamicTypeCache To end off this post, I’m going to create the cache for storing the generated proxy classes. I’ve spent a fair amount of time thinking about the type of collection I should use to store the types and have finally decided that for the time being I’m going to use a generic dictionary. This may change when I can actually performance test the proxy generator but the time being I think it makes good sense in theory, mainly as it pretty much maintains it’s performance with varying numbers of items – almost constant (0)1. Plus I won’t ever need to loop through the items which is not the dictionaries strong point. Here’s the code as it currently stands: DynamicTypeCache using System; using System.Collections.Generic; using System.Security.Cryptography; using System.Text; namespace Rapid.DynamicProxy.Types {     /// <summary>     /// Cache for storing proxy types.     /// </summary>     internal static class DynamicTypeCache     {         #region Declarations           static object syncRoot = new object();         public static Dictionary<string, Type> Cache = new Dictionary<string, Type>();           #endregion           /// <summary>         /// Adds a proxy to the type cache.         /// </summary>         /// <param name="type">The type.</param>         /// <param name="proxy">The proxy.</param>         public static void AddProxyForType(Type type, Type proxy)         {             lock (syncRoot)             {                 Cache.Add(GetHashCode(type.AssemblyQualifiedName), proxy);             }         }           /// <summary>         /// Tries the type of the get proxy for.         /// </summary>         /// <param name="type">The type.</param>         /// <returns></returns>         public static Type TryGetProxyForType(Type type)         {             lock (syncRoot)             {                 Type proxyType;                 Cache.TryGetValue(GetHashCode(type.AssemblyQualifiedName), out proxyType);                 return proxyType;             }         }           #region Private Methods           private static string GetHashCode(string fullName)         {             SHA1CryptoServiceProvider provider = new SHA1CryptoServiceProvider();             Byte[] buffer = Encoding.UTF8.GetBytes(fullName);             Byte[] hash = provider.ComputeHash(buffer, 0, buffer.Length);             return Convert.ToBase64String(hash);         }           #endregion     } } As you can see, there are two public methods, one for adding to the cache and one for getting from the cache. Hopefully they should be clear enough, the Get is a TryGet as I do not want the dictionary to throw an exception if a proxy doesn’t exist within the cache. Other than that I’ve decided to create a key using the SHA1CryptoServiceProvider, this may change but my initial though is the SHA1 algorithm is pretty fast to put together using the provider and it is also very unlikely to have any hashing collisions. (there are some maths behind how unlikely this is – here’s the wiki if you’re interested http://en.wikipedia.org/wiki/SHA_hash_functions)   Anyway, that’s the end of part 1 – although I haven’t started any of the fun stuff (by fun I mean hairpulling, teeth grating Relfection.Emit style fun), I’ve got the basis of the DynamicProxy in place so all we have to worry about now is creating the types, interceptor classes, method invocation information classes and finally a really nice fluent interface that will abstract all of the hard-core craziness away and leave us with a lightning fast, easy to use AOP framework. Hope you find the series interesting. All of the source code can be viewed and/or downloaded at our codeplex site - http://rapidioc.codeplex.com/ Kind Regards, Sean.

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >