Search Results

Search found 898 results on 36 pages for '2014'.

Page 27/36 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Root certificate authority works windows/linux but not mac osx - (malformed)

  - by AKwhat

  I have created a self-signed root certificate authority which if I install onto windows, linux, or even using the certificate store in firefox (windows/linux/macosx) will work perfectly with my terminating proxy. I have installed it into the system keychain and I have set the certificate to always trust. Within the chrome browser details it says "The certificate that Chrome received during this connection attempt is not formatted correctly, so Chrome cannot use it to protect your information. Error type: Malformed certificate" I used this code to create the certificate: openssl genrsa -des3 -passout pass:***** -out private/server.key 4096 openssl req -batch -passin pass:***** -new -x509 -nodes -sha1 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf If the issue is NOT that it is malformed (because it works everywhere else) then what else could it be? Am I installing it incorrectly? To be clear: Within the windows/linux OS, all browsers work perfectly. Within mac only firefox works if it uses its internal certificate store and not the keychain. It's the keychain method of importing a certificate that causes the issue. Thus, all browsers using the keychain will not work. Root CA Cert: -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE----- Intermediate CA Cert: Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) Signature Algorithm: sha1WithRSAEncryption Issuer: C=*****, ST=*******, L=******, O=*******, CN=******/emailAddress=****** Validity Not Before: May 21 13:57:32 2014 GMT Not After : Jun 20 13:57:32 2014 GMT Subject: C=*****, ST=********, O=*******, CN=*******/emailAddress=******* Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (4096 bit) Modulus (4096 bit): 00:e7:2d:75:38:23:02:8e:b9:8d:2f:33:4c:2a:11: 6d:d4:f8:29:ab:f3:fc:12:00:0f:bb:34:ec:35:ed: a5:38:10:1e:f3:54:c2:69:ae:3b:22:c0:0d:00:97: 08:da:b9:c9:32:c0:c6:b1:8b:22:7e:53:ea:69:e2: 6d:0f:bd:f5:96:b2:d0:0d:b2:db:07:ba:f1:ce:53: 8a:5e:e0:22:ce:3e:36:ed:51:63:21:e7:45:ad:f9: 4d:9b:8f:7f:33:4c:ed:fc:a6:ac:16:70:f5:96:36: 37:c8:65:47:d1:d3:12:70:3e:8d:2f:fb:9f:94:e0: c9:5f:d0:8c:30:e0:04:23:38:22:e5:d9:84:15:b8: 31:e7:a7:28:51:b8:7f:01:49:fb:88:e9:6c:93:0e: 63:eb:66:2b:b4:a0:f0:31:33:8b:b4:04:84:1f:9e: d5:ed:23:cc:bf:9b:8e:be:9a:5c:03:d6:4f:1a:6f: 2d:8f:47:60:6c:89:c5:f0:06:df:ac:cb:26:f8:1a: 48:52:5e:51:a0:47:6a:30:e8:bc:88:8b:fd:bb:6b: c9:03:db:c2:46:86:c0:c5:a5:45:5b:a9:a3:61:35: 37:e9:fc:a1:7b:ae:71:3a:5c:9c:52:84:dd:b2:86: b3:2e:2e:7a:5b:e1:40:34:4a:46:f0:f8:43:26:58: 30:87:f9:c6:c9:bc:b4:73:8b:fc:08:13:33:cc:d0: b7:8a:31:e9:38:a3:a9:cc:01:e2:d4:c2:a5:c1:55: 52:72:52:2b:06:a3:36:30:0c:5c:29:1a:dd:14:93: 2b:9d:bf:ac:c1:2d:cd:3f:89:1f:bc:ad:a4:f2:bd: 81:77:a9:f4:f0:b9:50:9e:fb:f5:da:ee:4e:b7:66: e5:ab:d1:00:74:29:6f:01:28:32:ea:7d:3f:b3:d7: 97:f2:60:63:41:0f:30:6a:aa:74:f4:63:4f:26:7b: 71:ed:57:f1:d4:99:72:61:f4:69:ad:31:82:76:67: 21:e1:32:2f:e8:46:d3:28:61:b1:10:df:4c:02:e5: d3:cc:22:30:a4:bb:81:10:dc:7d:49:94:b2:02:2d: 96:7f:e5:61:fa:6b:bd:22:21:55:97:82:18:4e:b5: a0:67:2b:57:93:1c:ef:e5:d2:fb:52:79:95:13:11: 20:06:8c:fb:e7:0b:fd:96:08:eb:17:e6:5b:b5:a0: 8d:dd:22:63:99:af:ad:ce:8c:76:14:9a:31:55:d7: 95:ea:ff:10:6f:7c:9c:21:00:5e:be:df:b0:87:75: 5d:a6:87:ca:18:94:e7:6a:15:fe:27:dd:28:5e:c0: ad:d2:91:d3:2d:8e:c3:c0:9f:fb:ff:c0:36:7e:e2: d7:bc:41 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Subject Alternative Name: DNS:localhost, DNS:dropbox.com, DNS:*.dropbox.com, DNS:filedropper.com, DNS:*.filedropper.com X509v3 Subject Key Identifier: F3:E5:38:5B:3C:AF:1C:73:C1:4C:7D:8B:C8:A1:03:82:65:0D:FF:45 X509v3 Authority Key Identifier: keyid:2B:37:39:7B:9F:45:14:FE:F8:BC:CA:E0:6E:B4:5F:D6:1A:2B:D7:B0 DirName:/C=****/ST=******/L=*******/O=*******/CN=******/emailAddress=******* serial:EE:8C:A3:B4:40:90:B0:62 X509v3 Basic Constraints: CA:TRUE Signature Algorithm: sha1WithRSAEncryption 46:2a:2c:e0:66:e3:fa:c6:80:b6:81:e7:db:c3:29:ab:e7:1c: f0:d9:a0:b7:a9:57:8c:81:3e:30:8f:7d:ef:f7:ed:3c:5f:1e: a5:f6:ae:09:ab:5e:63:b4:f6:d6:b6:ac:1c:a0:ec:10:19:ce: dd:5a:62:06:b4:88:5a:57:26:81:8e:38:b9:0f:26:cd:d9:36: 83:52:ec:df:f4:63:ce:a1:ba:d4:1c:ec:b6:66:ed:f0:32:0e: 25:87:79:fa:95:ee:0f:a0:c6:2d:8f:e9:fb:11:de:cf:26:fa: 59:fa:bd:0b:74:76:a6:5d:41:0d:cd:35:4e:ca:80:58:2a:a8: 5d:e4:d8:cf:ef:92:8d:52:f9:f2:bf:65:50:da:a8:10:1b:5e: 50:a7:7e:57:7b:94:7f:5c:74:2e:80:ae:1e:24:5f:0b:7b:7e: 19:b6:b5:bd:9d:46:5a:e8:47:43:aa:51:b3:4b:3f:12:df:7f: ef:65:21:85:c2:f6:83:84:d0:8d:8b:d9:6d:a8:f9:11:d4:65: 7d:8f:28:22:3c:34:bb:99:4e:14:89:45:a4:62:ed:52:b1:64: 9a:fd:08:cd:ff:ca:9e:3b:51:81:33:e6:37:aa:cb:76:01:90: d1:39:6f:6a:8b:2d:f5:07:f8:f4:2a:ce:01:37:ba:4b:7f:d4: 62:d7:d6:66:b8:78:ad:0b:23:b6:2e:b0:9a:fc:0f:8c:4c:29: 86:a0:bc:33:71:e5:7f:aa:3e:0e:ca:02:e1:f6:88:f0:ff:a2: 04:5a:f5:d7:fe:7d:49:0a:d2:63:9c:24:ed:02:c7:4d:63:e6: 0c:e1:04:cd:a4:bf:a8:31:d3:10:db:b4:71:48:f7:1a:1b:d9: eb:a7:2e:26:00:38:bd:a8:96:b4:83:09:c9:3d:79:90:e1:61: 2c:fc:a0:2c:6b:7d:46:a8:d7:17:7f:ae:60:79:c1:b6:5c:f9: 3c:84:64:7b:7f:db:e9:f1:55:04:6e:b5:d3:5e:d3:e3:13:29: 3f:0b:03:f2:d7:a8:30:02:e1:12:f4:ae:61:6f:f5:4b:e9:ed: 1d:33:af:cd:9b:43:42:35:1a:d4:f6:b9:fb:bf:c9:8d:6c:30: 25:33:43:49:32:43:a5:a8:d8:82:ef:b0:a6:bd:8b:fb:b6:ed: 72:fd:9a:8f:00:3b:97:a3:35:a4:ad:26:2f:a9:7d:74:08:82: 26:71:40:f9:9b:01:14:2e:82:fb:2f:c0:11:51:00:51:07:f9: e1:f6:1f:13:6e:03:ee:d7:85:c2:64:ce:54:3f:15:d4:d7:92: 5f:87:aa:1e:b4:df:51:77:12:04:d2:a5:59:b3:26:87:79:ce: ee:be:60:4e:87:20:5c:7f -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE-----

  Read the article

• How to invoke ajax, so that it should refresh the table and update the column

  - by Radhika

  Hi, In my application,i have four columns in my datatable.Initially, except second column all the other columns displays the value. The second column values should be displayed by automatic refresh. like Initially table looks like ID type Name Color 1 Benz White 2 Maruti Grey 3 Renault orange 4 VW pink After automatic refresh(Using AJAX) it should display like ID type Name Color 1 2012 Benz White 2 2013 Maruti Grey 3 2014 Renault orange 4 2015 VW pink I have implement this in jsf using ajax. can any one help me out in this.

  Read the article

• Convert regular date and time to Julian date and vice versa

  - by zbz.lvlv

  I am currently working on a program that will calculate sunrise and sunset times. How do I convert yyyymmddhhmmss to Julian date? I need the date to be very precise. It'll great if there can be an example for such conversions. Calendar cNow = Calendar.getInstance(); Calendar cJan1 = Calendar.getInstance(); double julianJan1_2014_12_00_00 = 2456659; cJan1.set(2014, 0, 0, 12, 0); Date dJan1 = cJan1.getTime(); Date dNow = cNow.getTime(); long lJan1 = dJan1.getTime(); long lNow = dNow.getTime(); double diffDay = (lNow - lJan1) / 1000 / 60 / 60 / 24; double julianDate = diffDay + julianJan1_2014_12_00_00; The code I currently have.

  Read the article

• IE 8 Errors for Group Permissions for access

  - by Jeff P.

  Hello, The company I work for is about to begin testing for a transition from IE6 to IE8. One of our main concerns is about using permissions to control intranet access to internal sites,etc. This was a problem we encountered during testing for IE7 and scrapped it all together. However, IE6 has more than its foot in the grave, its head is peeking out. Microsoft is only supporting IE6 until 2014 when they also abandon support for Windows XP. IE7 just came up with a box asking for you to enter your credentials. It didn't matter if you had permissions, it always said access denied. We have yet to begin testing but I was hoping someone has encountered this issue as well and may be able to shed some light on the subject.

  Read the article

• R webscraping: interrogating for date and importance

  - by adam.888

  I am able to webscrape a table from a webpage containing news library(XML) webpage <- "http://www.tradingeconomics.com/calendar" tables <- readHTMLTable(webpage ) n.rows <- unlist(lapply(tables, function(t) dim(t)[1])) dfcal <- as.data.frame(tables$calendar) However I do not know how to interrogate for date or for importance. For example how could I webscrape news from Jan 2014? I am able to do this on the webpage by altering button settings, but how can I do it from within R? I was also not able to collect the importance column data. Also are there better ways for collecting economic news from within R? I have looked on http://www.rseek.org/ but could not find anything. Thank you for your help.

  Read the article

• when text changed inputbox automatically updates next text boxes?

  - by James123

  Extension to my previous question http://bit.ly/c5yiVM I have 7 textboxes. If Top 1 textbox(Volume All Years) text changed, text need to be updated in next 6 inputboxes(Latest 2009 Volume to Latest 2014 Volume). I need javascript or Jquery for this. I will write Js textchanged() or focuschange() for top 1 textbox. So what should I write in focuschage() or textchanged methods(). I changed little bit in code. Now Html will like below. These textboxes have common CssClass. volumetextbox. Can we use this class and change text in all textboxes those have same CssClass. <tr id="row12_136" class="RegText"> <td style="width:420px;Padding-right:20px;">Volume All Years</td> <td style="width:420px;Padding-left:0px;"> <input name="12_136" type="text" maxlength="255" id="12_136" tabindex="61" title="Volume All Years" class="volumetextbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> </td> <tr id="row12_60" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2009 Volume</td> <td style="width:420px;Padding-left:0px;"> <input name="12_136" type="text" maxlength="255" id="12_60" tabindex="56" title="Volume All Years" class="volumetextbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> </td> <tr id="row12_61" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2010 Volume</td> <td style="width:420px;Padding-left:0px;"> <input name="12_136" type="text" maxlength="255" id="12_61" tabindex="57" title="Volume All Years" class="volumetextbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> </td> <tr id="row12_62" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2011 Volume</td> <td style="width:420px;Padding-left:0px;"> <input name="12_136" type="text" maxlength="255" id="12_62" tabindex="58" title="Volume All Years" class="volumetextbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> </td> <tr id="row12_63" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2012 Volume</td> <td style="width:420px;Padding-left:0px;"> <input name="12_136" type="text" maxlength="255" id="12_63" tabindex="59" title="Volume All Years" class="volumetextbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> </td> <tr id="row12_64" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2013 Volume</td> <td style="width:420px;Padding-left:0px;"> <input name="12_136" type="text" maxlength="255" id="12_64" tabindex="60" title="Volume All Years" class="volumetextbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> </td> <tr id="row12_65" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2014 Volume</td> <td style="width:420px;Padding-left:0px;"> <input name="12_136" type="text" maxlength="255" id="12_65" tabindex="61" title="Volume All Years" class="volumetextbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> </td>

  Read the article

• Redirecting part of URL in Nginx

  - by Maca

  Trying to move my blog to a new site and I want to redirect some urls. I use nginx. https://blogurl.com/news/2014-08-19/post-3451/mt-preview-33e2742af1eb.php The /news/2014-08-19/post-3451/mt-preview-33e2742af1eb.php part would be always moving. Redirect to below: https://blogurl.com/content/news/2014-08-19/post-3451/mt-preview-33e2742af1eb.php I basically want to insert /content/ after https://blogurl.com and so far I have rewrite ^(.*)$ /content/ break; But my issue is my CMS sits on the same directory level https://blogurl.com/mt/admin and if I simply apply the rewrite above my CMS address would move too. How could I prevent this.

  Read the article

• Breaking change October: Status waiting when create custom audience with add user data file?

  - by THACH LN

  In my system, I create a custom audience - data file - mobile advertiser ids with 10k user. After I created it, I refreshed API link to get information about the audience which I've just created: https://graph.facebook.com/act_xxx/customaudiences?fields=id,account_id,name,lookalike_spec,retention_days,subtype,approximate_count,rule,delivery_status,operation_status,data_source,permission_for_actions&limit=500&access_token=xxx. (After breaking change in October 2014, status field not return. So I see operation_status) I see that: "operation_status": { "code": 410, "description": "No file has been uploaded for this audience, or the previous upload has failed due to system error. Please try uploading the file again." } But after about 10s, I refresh again, and operation_status change to: "operation_status": { "code": 200, "description": "Normal" } My quetions is: how to check this audience's status is waiting ( uploading file) , like when I create on facebook not my our system. Thanks for all anwser.

  Read the article

• how to split this label to get the specific value(free gold)

  - by Wolf

  Hello all i am having a fun filled irritating little problem which i am sure can be resolved in less than 5 seconds with the enlightened and combined minds of stack overflow users ok first off it seems i am having trouble communicating what my trouble is with the gentlemen and ladies who are trying to help me in earlier posts so i am going to make it very simple i need to get 337 and 229 out of this son of satan string that is constantly updating every 2 seconds now i dont know how to go about doing this i know i should probably use split but i dont know how to do it on this because i have very little experience with it Last login: Thu Jun 5 08:20:35 2014 from .** /*/*-..****.**///*-****.**.*/****/*/***status Virtual server [...] is UP. *: 337 bananas left ****(s)******: 229 bananas eaten(s) ** *. [* ] – i am tired and would like to finish this before i am gray or sentanced to prison for raving naked down my street please help and thanks in advance p.s dont really care if this gets down voted a bit tired and more than a little angry so enjoy

  Read the article

• for TimeWithZone object, how to change the zone part only?

  - by leomayleomay

  I have a table Coupon with a field expired_at, which is of datetime type, and before I save the record, I want to change the zone part of the field according to the user's choice. Say, c = Coupon.new c.expired_at = DateTime.now c.expired_at_timezone = "Arizona" c.save! and in the coupon.rb class Coupon << ActiveRecord::Base def before_save # change the zone part here, leave the date and time part alone end end What I'm saying is if the admin want the coupon expired at 2014-07-01 10:00 am, Arizona time, the expired_at stored in the db should be like this: Tue, 01 Jul 2014 10:00:00 MST -07:00 is there any way I can modify the zone part only and leave the date and time part alone? Thanks

  Read the article

• I am requesting ideas on manipulating output from an array and parse to something useful

  - by Cyber Demon

  First I am new to PS scripting. Please be gentle. This simple script I have written is ok. $Iplist = Get-Content ips.txt foreach ($ip in $Iplist) { .\psping -h -n 3 -w 0 $ip >> results.csv } Move-Item "C:\ping\results.csv" ("C:\ping\aftermath\{0:yyyyMMddhhmm}.csv" -f (get-date)) The Output is as follows, as an example (I used www.google.com): Pinging 74.125.225.48 with 32 bytes of data: 3 iterations (warmup 0) ping test: Reply from 74.125.225.48: 54.14ms Reply from 74.125.225.48: 54.85ms Reply from 74.125.225.48: 54.48ms Ping statistics for 74.125.225.48: Sent = 3, Received = 3, Lost = 0 (0% loss), Minimum = 54.14ms, Maximum = 54.85ms, Average = 54.49ms Latency Count 54.14 1 54.17 0 54.21 0 54.25 0 54.29 0 54.32 0 54.36 0 54.4 0 54.44 0 54.47 1 54.51 0 54.55 0 54.59 0 54.62 0 54.66 0 54.7 0 54.74 0 54.77 0 54.81 0 54.85 1 What I'm looking for is something to show me the following as an output. ServerIP Name TimeStamp Results AverageResponseTime in milli-seconds www.google.com 2014-08-14T16:09:59 Up 53 Can you guide me?

  Read the article

• WebBrowserDocumentCompletedEventArgs Not Reached inside While Loop

  - by user3715962

  I am trying to use the WebBrowserDocumentCompletedEventHandler inside of a while loop but when the code executes the WebBrowserDocumentCompletedEventArgs is never reached. Can somebody tell me what I am doing wrong? int year = 1900; int currentYear = 2014; private void button1_Click(object sender, EventArgs e) { while (year < currentYear) { WebBrowser wb = new WebBrowser(); wb.Navigate("http://myurl.com/list/" + year.ToString()); year++; wb.DocumentCompleted += new WebBrowserDocumentCompletedEventHandler(wb_DocumentCompleted); } } void wb_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { //Code is not reaching here MessageBox.Show("Test"); }

  Read the article

• &lsquo;Responsive Web Design with Macaw&rsquo;&ndash; free book updated

  - by ihaynes

  Originally posted on: http://geekswithblogs.net/ihaynes/archive/2014/08/12/lsquoresponsive-web-design-with-macawrsquondash-free-book-updated.aspxThe free book on Macaw by Schonne Eldridge that I mentioned before has been updated. If you’re already subscribed you’ll get alerts for updates. If not the book is well worth getting to start you off with Macaw. If you haven’t tried Macaw yet, heck, you’re missing something big. The book is available from http://schonne.com/macaw Macaw itself is at http://macaw.co

  Read the article

• Oracle SQL Developer is for Oracle Database

  - by thatjeffsmith

  What is Oracle SQL Developer? Well, according to this document on OTN… What is SQL Developer? Date: May 2014 Oracle SQL Developer is the Oracle Database IDE. A free graphical user interface, Oracle SQL Developer allows database users and administrators to do their database tasks in fewer clicks and keystrokes. A productivity tool, SQL Developer’s main objective is to help the end user save time and maximize the return on investment in the Oracle Database technology stack. Ok, sounds pretty straightforward. Where does the confusion lie then? Some People Use SQL Developer to Connect to 3rd Party Databases SQL Developer allows you to register 3rd party database JDBC drivers. The 3rd party being a company OTHER than Oracle that makes a database product. You know who they are (SAP, MSFT, IBM, etc.) Registering 3rd party JDBC drivers in SQL Developer But maybe you don’t understand why we support these types of connections? It’s for one driving reason. To Help You Migrate to Oracle Database Yes, you get a worksheet and a tree to query and browse those systems. But, the real meat and bones there are around our migration projects and our translation scratch editor. At the end of the day, it’s there so you can move your data from say Sybase ASE to Oracle Database. On a side note, the migration technology was previously available in a separate application, the Migration Workbench. The technology and the awesome people behind it were folded into SQL Developer. So when asked what SQL Developer is, I say it’s the Database IDE and the official 3rd party database migration to Oracle platform. So anyways, when you ask for better support for another 3rd party provider, we deliver that support based on that business driver. If another 3rd party database jdbc driver is introduced, it’s because we have a lot of customers migrating from that platform. We’re not adding it to make it easier for you to work with SQL Server on your Mac. But, if you find that useful – that is cool. It’s just not why we’ve got the support for SQL Server connections in SQL Developer.

  Read the article

• Diving into OpenStack Network Architecture - Part 1

  - by Ronen Kofman

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} rkofman Normal rkofman 83 3045 2014-05-23T21:11:00Z 2014-05-27T06:58:00Z 3 1883 10739 Oracle Corporation 89 25 12597 12.00 140 Clean Clean false false false false EN-US X-NONE HE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-bidi-language:AR-SA;} Before we begin OpenStack networking has very powerful capabilities but at the same time it is quite complicated. In this blog series we will review an existing OpenStack setup using the Oracle OpenStack Tech Preview and explain the different network components through use cases and examples. The goal is to show how the different pieces come together and provide a bigger picture view of the network architecture in OpenStack. This can be very helpful to users making their first steps in OpenStack or anyone wishes to understand how networking works in this environment.  We will go through the basics first and build the examples as we go. According to the recent Icehouse user survey and the one before it, Neutron with Open vSwitch plug-in is the most widely used network setup both in production and in POCs (in terms of number of customers) and so in this blog series we will analyze this specific OpenStack networking setup. As we know there are many options to setup OpenStack networking and while Neturon + Open vSwitch is the most popular setup there is no claim that it is either best or the most efficient option. Neutron + Open vSwitch is an example, one which provides a good starting point for anyone interested in understanding OpenStack networking. Even if you are using different kind of network setup such as different Neutron plug-in or even not using Neutron at all this will still be a good starting point to understand the network architecture in OpenStack. The setup we are using for the examples is the one used in the Oracle OpenStack Tech Preview. Installing it is simple and it would be helpful to have it as reference. In this setup we use eth2 on all servers for VM network, all VM traffic will be flowing through this interface.The Oracle OpenStack Tech Preview is using VLANs for L2 isolation to provide tenant and network isolation. The following diagram shows how we have configured our deployment: This first post is a bit long and will focus on some basic concepts in OpenStack networking. The components we will be discussing are Open vSwitch, network namespaces, Linux bridge and veth pairs. Note that this is not meant to be a comprehensive review of these components, it is meant to describe the component as much as needed to understand OpenStack network architecture. All the components described here can be further explored using other resources. Open vSwitch (OVS) In the Oracle OpenStack Tech Preview OVS is used to connect virtual machines to the physical port (in our case eth2) as shown in the deployment diagram. OVS contains bridges and ports, the OVS bridges are different from the Linux bridge (controlled by the brctl command) which are also used in this setup. To get started let’s view the OVS structure, use the following command: # ovs-vsctl show 7ec51567-ab42-49e8-906d-b854309c9edf     Bridge br-int         Port br-int             Interface br-int type: internal         Port "int-br-eth2"             Interface "int-br-eth2"     Bridge "br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2" ovs_version: "1.11.0" We see a standard post deployment OVS on a compute node with two bridges and several ports hanging off of each of them. The example above is a compute node without any VMs, we can see that the physical port eth2 is connected to a bridge called “br-eth2”. We also see two ports "int-br-eth2" and "phy-br-eth2" which are actually a veth pair and form virtual wire between the two bridges, veth pairs are discussed later in this post. When a virtual machine is created a port is created on one the br-int bridge and this port is eventually connected to the virtual machine (we will discuss the exact connectivity later in the series). Here is how OVS looks after a VM was launched: # ovs-vsctl show efd98c87-dc62-422d-8f73-a68c2a14e73d     Bridge br-int         Port "int-br-eth2"             Interface "int-br-eth2"         Port br-int             Interface br-int type: internal         Port "qvocb64ea96-9f" tag: 1             Interface "qvocb64ea96-9f"     Bridge "br-eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2" ovs_version: "1.11.0" Bridge "br-int" now has a new port "qvocb64ea96-9f" which connects to the VM and tagged with VLAN 1. Every VM which will be launched will add a port on the “br-int” bridge for every network interface the VM has. Another useful command on OVS is dump-flows for example: # ovs-ofctl dump-flows br-int NXST_FLOW reply (xid=0x4): cookie=0x0, duration=735.544s, table=0, n_packets=70, n_bytes=9976, idle_age=17, priority=3,in_port=1,dl_vlan=1000 actions=mod_vlan_vid:1,NORMAL cookie=0x0, duration=76679.786s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=1 actions=drop cookie=0x0, duration=76681.36s, table=0, n_packets=68, n_bytes=7950, idle_age=17, hard_age=65534, priority=1 actions=NORMAL As we see the port which is connected to the VM has the VLAN tag 1. However the port on the VM network (eth2) will be using tag 1000. OVS is modifying the vlan as the packet flow from the VM to the physical interface. In OpenStack the Open vSwitch agent takes care of programming the flows in Open vSwitch so the users do not have to deal with this at all. If you wish to learn more about how to program the Open vSwitch you can read more about it at http://openvswitch.org looking at the documentation describing the ovs-ofctl command. Network Namespaces (netns) Network namespaces is a very cool Linux feature can be used for many purposes and is heavily used in OpenStack networking. Network namespaces are isolated containers which can hold a network configuration and is not seen from outside of the namespace. A network namespace can be used to encapsulate specific network functionality or provide a network service in isolation as well as simply help to organize a complicated network setup. Using the Oracle OpenStack Tech Preview we are using the latest Unbreakable Enterprise Kernel R3 (UEK3), this kernel provides a complete support for netns. Let's see how namespaces work through couple of examples to control network namespaces we use the ip netns command: Defining a new namespace: # ip netns add my-ns # ip netns list my-ns As mentioned the namespace is an isolated container, we can perform all the normal actions in the namespace context using the exec command for example running the ifconfig command: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:16436 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) We can run every command in the namespace context, this is especially useful for debug using tcpdump command, we can ping or ssh or define iptables all within the namespace. Connecting the namespace to the outside world: There are various ways to connect into a namespaces and between namespaces we will focus on how this is done in OpenStack. OpenStack uses a combination of Open vSwitch and network namespaces. OVS defines the interfaces and then we can add those interfaces to namespace. So first let's add a bridge to OVS: # ovs-vsctl add-br my-bridge Now let's add a port on the OVS and make it internal: # ovs-vsctl add-port my-bridge my-port # ovs-vsctl set Interface my-port type=internal And let's connect it into the namespace: # ip link set my-port netns my-ns Looking inside the namespace: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:65536 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) my-port   Link encap:Ethernet HWaddr 22:04:45:E2:85:21           BROADCAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) Now we can add more ports to the OVS bridge and connect it to other namespaces or other device like physical interfaces. Neutron is using network namespaces to implement network services such as DCHP, routing, gateway, firewall, load balance and more. In the next post we will go into this in further details. Linux Bridge and veth pairs Linux bridge is used to connect the port from OVS to the VM. Every port goes from the OVS bridge to a Linux bridge and from there to the VM. The reason for using regular Linux bridges is for security groups’ enforcement. Security groups are implemented using iptables and iptables can only be applied to Linux bridges and not to OVS bridges. Veth pairs are used extensively throughout the network setup in OpenStack and are also a good tool to debug a network problem. Veth pairs are simply a virtual wire and so veths always come in pairs. Typically one side of the veth pair will connect to a bridge and the other side to another bridge or simply left as a usable interface. In this example we will create some veth pairs, connect them to bridges and test connectivity. This example is using regular Linux server and not an OpenStack node: Creating a veth pair, note that we define names for both ends: # ip link add veth0 type veth peer name veth1 # ifconfig -a . . veth0     Link encap:Ethernet HWaddr 5E:2C:E6:03:D0:17           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) veth1     Link encap:Ethernet HWaddr E6:B6:E2:6D:42:B8           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) . . To make the example more meaningful this we will create the following setup: veth0 => veth1 => br-eth3 => eth3 ======> eth2 on another Linux server br-eth3 – a regular Linux bridge which will be connected to veth1 and eth3 eth3 – a physical interface with no IP on it, connected to a private network eth2 – a physical interface on the remote Linux box connected to the private network and configured with the IP of 50.50.50.1 Once we create the setup we will ping 50.50.50.1 (the remote IP) through veth0 to test that the connection is up: # brctl addbr br-eth3 # brctl addif br-eth3 eth3 # brctl addif br-eth3 veth1 # brctl show bridge name     bridge id               STP enabled     interfaces br-eth3         8000.00505682e7f6       no              eth3                                                         veth1 # ifconfig veth0 50.50.50.50 # ping -I veth0 50.50.50.51 PING 50.50.50.51 (50.50.50.51) from 50.50.50.50 veth0: 56(84) bytes of data. 64 bytes from 50.50.50.51: icmp_seq=1 ttl=64 time=0.454 ms 64 bytes from 50.50.50.51: icmp_seq=2 ttl=64 time=0.298 ms When the naming is not as obvious as the previous example and we don't know who are the paired veth interfaces we can use the ethtool command to figure this out. The ethtool command returns an index we can look up using ip link command, for example: # ethtool -S veth1 NIC statistics: peer_ifindex: 12 # ip link . . 12: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 Summary That’s all for now, we quickly reviewed OVS, network namespaces, Linux bridges and veth pairs. These components are heavily used in the OpenStack network architecture we are exploring and understanding them well will be very useful when reviewing the different use cases. In the next post we will look at how the OpenStack network is laid out connecting the virtual machines to each other and to the external world. @RonenKofman

  Read the article

• [SQLServer JDBC Driver][SQLServer]Could not find stored procedure 'master..xp_jdbc_open2'.

  - by Vijaya Moderator -Oracle

  When connecting to MS SQL Server Database via Weblogic Datasource and using XA jdbc driver, the following error is thrown. <Jun 3, 2014 5:16:49 AM PDT> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Could not find stored procedure 'master..xp_jdbc_open2'. at weblogic.jdbc.sqlserverbase.ddb_.b(Unknown Source)at weblogic.jdbc.sqlserverbase.ddb_.a(Unknown Source)at weblogic.jdbc.sqlserverbase.ddb9.b(Unknown Source)at weblogic.jdbc.sqlserverbase.ddb9.a(Unknown Source)at weblogic.jdbc.sqlserver.tds.ddr.v(Unknown Source)at weblogic.jdbc.sqlserver.tds.ddr.a(Unknown Source)at weblogic.jdbc.sqlserver.tds.ddq.a(Unknown Source)at weblogic.jdbc.sqlserver.tds.ddr.a(Unknown Source)at weblogic.jdbc.sqlserver.ddj.m(Unknown Source)at weblogic.jdbc.sqlserverbase.ddel.e(Unknown Source)at weblogic.jdbc.sqlserverbase.ddel.a(Unknown Source)  The cause behind the issue is that  the MS SQL Server was not installed with the Stored procedures to enable JTA/XA Solution To connect to SQL Server via XA Driver from WLS Datasource you need to install Stored Procedures for JTATo use JDBC distributed transactions through JTA, your system administrator should use the following procedure to install Microsoft SQL Server JDBC XA procedures. This procedure must be repeated for each MS SQL Server installation that will be involved in a distributed transaction.To install stored procedures for JTA:1. Copy the appropriate sqljdbc.dll and instjdbc.sql files from the WL_HOME\server\lib directory to the SQL_Server_Root/bin directory of the MS SQL Server database server, where WL_HOME is the directory in which WebLogic server is installed, typically c:\Oracle\Middleware\wlserver_10.x.  Note:  If you are installing stored procedures on a database server with multiple Microsoft SQL Server instances, each running SQL Server instance must be able to locate the sqljdbc.dll file.Therefore the sqljdbc.dll file needs to be anywhere on the global PATH or on the application-specific path. For the application-specific path, place the sqljdbc.dll file into the :\Program Files\Microsoft SQL Server\MSSQL$\Binn directory for each instance. 2. From the database server, use the ISQL utility to run the instjdbc.sql script. As a precaution, have your system administrator back up the master database before running instjdbc.sql. At a command prompt, use the following syntax to run instjdbc.sql:  ISQL -Usa -Psa_password -Sserver_name -ilocation\instjdbc.sql  where:  sa_password is the password of the system administrator.  server_name is the name of the server on which SQL Server resides.  location is the full path to instjdbc.sql. (You copied this script to the SQL_Server_Root/bin directory in step 1.)  The instjdbc.sql script generates many messages. In general, these messages can be ignored; however, the system administrator should scan the output for any messages that may indicate an execution error. The last message should indicate that instjdbc.sql ran successfully. The script fails when there is insufficient space available in the master database to store the JDBC XA procedures or to log changes to existing procedures.

  Read the article

• A Few Words from Oracle’s Channel Chief

  - by Meghan Fritz-Oracle

  As Oracle enters a new fiscal year, I want to take a moment and reflect on my time at Oracle thus far. The technology industry is currently at an inflection point trying to figure out where growth will come from. When you look at Oracle’s portfolio of products, it's a complete stack from applications to disc, offering differentiation in the marketplace. I was initially drawn to Oracle’s leadership, strategy, and world-class technology. Since joining the Oracle team in October 2013, I’ve had the privilege of traveling around the globe visiting our partners and customers, and wanted to share several common themes that came up during these meetings. Cloud: Many partners are trying to figure out how to build a business around the cloud. Oracle partners can currently resell or refer our cloud services. We saw over 300 percent growth from cloud resale last quarter. Engineered Systems: Hardware and software integrated together to simplify IT allows our joint customers to focus on the innovation they need to compete in a complex marketplace. We're seeing great success in a several areas, with more partners saying, “Let’s start with Oracle on Oracle.” The Internet of Things: This is the next big opportunity for device manufacturers and ISV‘s to capture market share in what is projected to be a mulit-trillion-dollar opportunity, according to Gartner.  Competition: We've got a tremendous middleware platform and a tremendous database install base. We’re not just a database company; we are a complete provider. So looking ahead, what are my priorities for fiscal 2015? Oracle PartnerNetwork has some very exciting plans on the horizon. There’s a lot more leadership and announcements to unfold, especially at this year’s Global Partner Kickoff taking place on June 25 + 26 depending on your region and time zone. I along with several other Oracle executives will be shedding light on Oracle’s strategy for the upcoming year, the latest opportunities within the OPN Specialized Program and sales strategies that will help you to continue to grow and profit with Oracle. Stay tuned for registration information next week.We also have Oracle OpenWorld and JavaOne to look forward to. These conferences are taking place in San Francisco from September 28 – October 2. We’ll have a variety of partner-specific activities for you at OPN Central @ OpenWorld including the OPN keynote, the famed AfterDark networking reception, access to the OPN Lounge and more.In the meantime, I hope that everyone has a great end to fiscal 2014.Best regards,Rich Geraffo Senior Vice President, Worldwide Alliances and Channels

  Read the article

• Compare those hard-to-reach servers with SQL Snapper

  - by Michelle Taylor

  If you’ve got an environment which is at the end of an unreliable or slow network connection, or isn’t connected to your network at all, and you want to do a deployment to that environment – then pointing SQL Compare at it directly is difficult or impossible. While you could run SQL Compare locally on that environment, if it’s a server – especially if it’s a locked-down server – you probably don’t want to go through the hassle of using another activation on it. Or possibly you’re not allowed to install software at all, because you don’t have admin rights – but you can run user-mode software. SQL Snapper is a standalone, licensing-free program which takes SQL Compare snapshots of a database. It can create a snapshot within the context of that environment which can then be moved to your working environment to run SQL Compare against, allowing you to create a deployment script for environments you can’t get SQL Compare into. Where can I find it? You can find RedGate.SQLSnapper.exe in your SQL Compare installation directory – if you haven’t changed it, that will be something like C:\Program Files (x86)\Red Gate\SQL Compare 10 (or 11 if you’re using our SQL Server 2014 support beta). As well as copying the executable, you’ll also currently need to copy the System.Threading.dll and RedGate.SOCCompareInterface.dll files from the same directory alongside it. How do I use it? SQL Snapper’s UI is just a cut-down version of the snapshot creation UI in SQL Compare – just fill in the boxes and create your snapshot, then bring it back to the place you use SQL Compare to compare against your difficult-to-reach environment. SQL Snapper also has a command-line mode if you can’t run the UI in your target environment – just specify the server, database and output location with the /server, /database and /mksnap arguments, and optionally the username and password if you’re using SQL security, e.g.: RedGate.SQLSnapper.exe /database:yourdatabase /server:yourservername /username:youruser /password:yourpassword /mksnap:filename.snp What’s the catch? There are a few limitations of SQL Snapper in its current form – notably, it can’t read encrypted objects, and you’ll also currently need to copy the System.Threading.dll and RedGate.SOCCompareInterface.dll files alongside it, which we recognise is a little awkward in some environments. If you use SQL Snapper and want to share your experiences, or help us work on improving the experience in future, please comment here or leave a request on the SQL Compare UserVoice at https://redgate.uservoice.com/forums/141379-sql-compare.

  Read the article

• La nueva version de Enterprise Manager 12c, Release 4!

  - by grantunez-Oracle

  El día 3 de Junio del 2014 se anuncio la nueva versión de Enterprise Manager, y en esta versión hay nuevas funcionalidades que realmente hace que uno se apasione por este producto. Aquí no voy a platicar de todas las nuevas características, pero si de unas cuantas que son las de mas interés para la Base de Datos. Gestión Avanzada de Umbrales (Advanced Threshold Management) Esta funcionalidad  lo que permite es tener una mayor flexibilidad en los umbrales de todos tus objetivos (Targets) Umbrales basados en tiempo: Auto ajusta los umbrales estáticos, basados ??en los cambios de carga de trabajo de tu ambiente de trabajo. Por ejemplo, no son las mismas cargas de trabajo que tiene tu ambiente los fines de semana a comparación en un cierre de mes. Umbrales adaptativos: Umbrales que se calculan automáticamente para alertar si tu objetivo, ya sea una BD o un Exadata  se desvía del comportamiento esperado de su ambiente normal de trabajo. Interfaz para el seguimiento de tus tareas programadas Anteriormente si tenias varias tareas programadas, tenias que entrar a cada uno de tus targets para verificar como iba progresando, ahora en esta nueva versión, existe una nueva interfaz en la que te podrá permitir ver todas las tareas programadas que tienes en tu ambiente, reduciendo el numero de clicks para poder llegar a esta. De igual manera, se introduce la capacidad de poder exportar e importar tus tareas programadas a través de emcli emcli export_jobs  emcli import_jobs   Almacén de AWR (AWR Warehouse) En esta nueva versión se introdujo un almacén de los snapshots de AWR, este almacén o repositorio por default tiene una retención infinita, significando, que nunca va a borrar los snapshots de AWR.  Este repositorio puede ser una BD en  11.2.0.4 + el ultimo PSU o una version mas nueva. Las siguientes caracteristicas de AWR van a encontrarse en este repositorio Pagina de Performance Reporte AWR ASH Analytics Comparar un periodo de ADDM Comparar un un periodo de tiempo  In-Memory Store Central  Enterprise Manager 12.1.0.4 viene listo para la nueva version de la base de datos 12c, en donde vamos a poder ver un heat-map de los objetos que se encuentran en el "memory-store". Aquí, vamos a poder ver la compresión que se efectúa sobre los segmentos "en-memoria". De la misma manera vamos a tener un tutor o advisor, que nos va a poder guiar en nuestro proceso de decisión para ver que segmentos podemos definir en nuestra "in-memory store" . Mas Información Enterprise Manager  Enterprise Manager Cloud Control Documentation

  Read the article

• PowerShell – Sexy PoSH console

  - by Waclaw Chrabaszcz

  Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2014/08/15/powershell--sexy-posh-console.aspxPowerShell don't has to be boring. Download this module: http://www.powertheshell.com/download/modules/PTSAeroConsole.zip Extract it into C:\Windows\System32\WindowsPowerShell\v1.0\Modules(you may need to enable both module files by right clicking | Prosperities |Unlock) Now you can start PowerShell window:  Import-Module PTSAeroConsoleEnable-AeroGlassThemeDisable-AeroGlassTheme   Enjoy!

  Read the article

• OrbitFX: JavaFX 8 3D & NetBeans Platform in Space!

  - by Geertjan

  Here is a collection of screenshots from a proof of concept tool being developed by Nickolas Sabey and Sean Phillips from a.i. solutions. Before going further, read a great new article here written on java.net by Kevin Farnham, in light of the Duke's Choice Award (DCA) recently received at JavaOne 2013 by the a.i. solutions team. Here's Sean receiving the award on behalf of the a.i. solutions team, surrounded by the DCA selection committee and other officials: They won the DCA for helping facilitate and deploy the 2014 launch of NASA's Magnetospheric Multiscale mission, using JDK 7, the NetBeans Platform, and JavaFX to create the GEONS Ground Support System, helping reduce software development time by approximately 35%. The prototype tool that Nicklas and Sean are now working on uses JavaFX 3D with the NetBeans Platform and is nicknamed OrbitFX. Much of the early development is being done to experiment with different patterns, so that accuracy is currently not the goal. For example, you'll notice in the screenshots that the Earth is really close to the Sun, which is obviously not correct. The screenshots are generated using Java 8 build 111, together with NetBeans Platform 7.4. Inspired by various JavaOne demos using JavaFX 3D, Nick began development integrating them into their existing NetBeans Platform infrastructure. The 3D scene showing the Sun and Earth objects is all JavaFX 8 3D, demonstrating the use of Phong Material support, along with multiple light and camera objects. Each JavaFX component extends a JFXPanel type, so that each can easily be added to NetBeans Platform TopComponents. Right-clicking an item in the explorer view offers a context menu that animates and centers the 3D scene on the selected celestial body.  With each JavaFX scene component wrapped in a JFXPanel, they can easily be integrated into a NetBeans Platform Visual Library scene.  In this case, Nick and Sean are using an instance of their custom Slipstream PinGraphScene, which is an extension of the NetBeans Platform VMDGraphScene. Now, via the NetBeans Platform Visual Library, the OrbitFX celestial body viewer can be used in the same space as a WorldWind viewer, which is provided by a previously developed plugin. "This is a clear demonstration of the power of the NetBeans Platform as an application development framework," says Sean Phillips. "How else could you have so much rich application support placed literally side by side so easily?"

  Read the article

• ERP in a Flash! Latest News on JD Edwards and Oracle VM Templates

  - by Kem Butller-Oracle

  Oracle Announces the Availability of Oracle VM Templates for JD Edwards EnterpriseOne 9.1 Update 2 and Tools 9.1 Update 4.4 Continuing the commitment to rapid and predictable deployments of JD Edwards EnterpriseOne, Oracle announces the general availability of Oracle VM templates for JD Edwards EnterpriseOne Application release 9.1 Update 2 and Tools release 9.1 Update 4.4. These templates can be used with Oracle VM for x86, on the Oracle Exalogic Elastic Cloud, and on the Oracle Database Machine. Oracle VM Templates for JD Edwards EnterpriseOne accelerate the process of setting up a working environment compared to the traditional installation process. The templates can be a key component to a well-managed cloud infrastructure, allowing system administrators to quickly provision fully functional JD Edwards EnterpriseOne environments for evaluation, development, or production use. The templates contain preconfigured images of the major JD Edwards EnterpriseOne server components, including: • Enterprise server • HTML server • Database server • BI Publisher (for use with One View Reporting) • Business Services Server and ADF Runtime (for use with Mobile Smartphone Applications) • Application Interface Services (new with this release, for use with Mobile Enterprise Applications) • Server Manager (new with this release) The virtual server images are built on a complete Oracle technology stack, including Oracle VM for x86, Oracle Linux, Oracle WebLogic Server, Oracle Database, and Oracle Business Intelligence Publisher. The templates can be installed into an Oracle VM for x86 system running on standard x86 servers, the Oracle Exalogic Elastic Cloud, and the Oracle Database Appliance as a composite “all-in-one” system. The database can be deployed as a fully preconfigured VM template, or it can be deployed to a preexisting database server, for example, the Oracle Exadata Database Machine or the Oracle Database Appliance. This latest set of templates includes the following applications and technology components: • JD Edwards EnterpriseOne Applications Release 9.1 Update 2 with ESUs as of April 8, 2014 • JD Edwards EnterpriseOne Tools 9.1 Update 4, maintenance pack 4 (9.1.4.4) • Oracle Database 12c (12.1.0.1) • Oracle WebLogic Server 12c (12.1.2) • Oracle Linux 5 Update 8, 64-bit • Oracle Business Intelligence Publisher 11.1.1.7.1, for use with JD Edwards EnterpriseOne One View Reporting • JD Edwards EnterpriseOne Business Services Server and Oracle Application Development Framework (ADF) 11.1.1.5, for use with the JD Edwards EnterpriseOne Mobile Applications. The delivery also includes a JD Edwards EnterpriseOne deployment server preconfigured to match the content of the templates. This edition of the templates also includes enhanced configuration utilities that greatly simplify the process of configuring the templates for deployment into a running system. The templates are immediately available for download from the Oracle Software Delivery Cloud. For more information see: • My Oracle Support article 884592.1 • Oracle Technology Network

  Read the article

• Data Modeling Resources

  - by Dejan Sarka

  You can find many different data modeling resources. It is impossible to list all of them. I selected only the most valuable ones for me, and, of course, the ones I contributed to. Books Chris J. Date: An Introduction to Database Systems – IMO a “must” to understand the relational model correctly. Terry Halpin, Tony Morgan: Information Modeling and Relational Databases – meet the object-role modeling leaders. Chris J. Date, Nikos Lorentzos and Hugh Darwen: Time and Relational Theory, Second Edition: Temporal Databases in the Relational Model and SQL – all theory needed to manage temporal data. Louis Davidson, Jessica M. Moss: Pro SQL Server 2012 Relational Database Design and Implementation – the best SQL Server focused data modeling book I know by two of my friends. Dejan Sarka, et al.: MCITP Self-Paced Training Kit (Exam 70-441): Designing Database Solutions by Using Microsoft® SQL Server™ 2005 – SQL Server 2005 data modeling training kit. Most of the text is still valid for SQL Server 2008, 2008 R2, 2012 and 2014. Itzik Ben-Gan, Lubor Kollar, Dejan Sarka, Steve Kass: Inside Microsoft SQL Server 2008 T-SQL Querying – Steve wrote a chapter with mathematical background, and I added a chapter with theoretical introduction to the relational model. Itzik Ben-Gan, Dejan Sarka, Roger Wolter, Greg Low, Ed Katibah, Isaac Kunen: Inside Microsoft SQL Server 2008 T-SQL Programming – I added three chapters with theoretical introduction and practical solutions for the user-defined data types, dynamic schema and temporal data. Dejan Sarka, Matija Lah, Grega Jerkic: Training Kit (Exam 70-463): Implementing a Data Warehouse with Microsoft SQL Server 2012 – my first two chapters are about data warehouse design and implementation. Courses Data Modeling Essentials – I wrote a 3-day course for SolidQ. If you are interested in this course, which I could also deliver in a shorter seminar way, you can contact your closes SolidQ subsidiary, or, of course, me directly on addresses [email protected] or [email protected]. This course could also complement the existing courseware portfolio of training providers, which are welcome to contact me as well. Logical and Physical Modeling for Analytical Applications – online course I wrote for Pluralsight. Working with Temporal data in SQL Server – my latest Pluralsight course, where besides theory and implementation I introduce many original ways how to optimize temporal queries. Forthcoming presentations SQL Bits 12, July 17th – 19th, Telford, UK – I have a full-day pre-conference seminar Advanced Data Modeling Topics there.

  Read the article

• Free eBook: 45 Database Performance Tips for Developers

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/05/25/free-ebook-45-database-performance-tips-for-developers.aspxAt http://www.red-gate.com/products/sql-development/sql-prompt/entrypage/sql-performance-tips-ebook, RedGate are offering a free E-Book, “45 Database Performance Tips for Developers” They also offer on the same page, a 14-day trial of SQL Prompt, an intellisence-style add-on for SSMS (SQL Server Management Studio).

  Read the article

• Free E-book on NHibernate from Syncfusion

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/08/07/free-e-book-on-nhibernate-from-syncfusion.aspxSyncfusion are providing a free E-Book on NHibernate at http://www.syncfusion.com/resources/techportal/ebooks/nhibernate?utm_medium=edm “Master the intricacies of NHibernate, an established and powerful Object/Relational Mapper (ORM) in NHibernate Succinctly. Let author Ricardo Peres guide you toward a fuller understanding of one of the oldest and most flexible ORMs available”

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >