Search Results

Search found 19795 results on 792 pages for '8 bit'.

Page 27/792 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • Unable to install Nvidia drivers

    - by Tazzer
    a few days ago I installed ubuntu 11.10 on my friends computer. Despite all of our efforts we are unable to open the default unity and it will only open the 2d interface. I have been told in the IRC chat room that we need to install the graphics card drivers(nvidia geforce 420.) When I check the additional drivers app it doesn't show any to install. I tried installing the ones from the nvidia website but no luck, I also forgot to mention. I don't know if it means anything but he has a 64 bit computer and it is ubuntu 11.10 64bit.

    Read the article

  • Ubuntu 12.10 over Ubuntu 11.10 seems to hang

    - by Angela Trapp
    My installation of Ubuntu 12.10 over Ubuntu 11.10 seems to hang on "saving installed packages". How long should I wait before knowing for sure that something is wrong? I stopped it once and tried re-installing but am getting the same results. I'm installing from a USB stick. I'm connected to the internet using a wired connection but I'm reading here to connect to a wi-fi network while installing. Could this possibly be the issue? I can't install using wi-fi at the moment as my router was fried in a brownout yesterday. I've ordered another router online so as soon as it gets in, I'll try again. Any suggestions are appreciated! Please let me know if you need more information. It's a 32-bit installation and I have 1 GB of memory. Thanks!

    Read the article

  • Lenovo G580 Brightness Error caused by unsupported updates. How to revert?

    - by Arjun Bajaj
    I just installed the 64-Bit version of Ubuntu 12.04 on my newly bought Lenovo G580. The brightness control was working properly using the Live CD and when I first started the installed version. Then I updated Ubuntu and restarted my laptop, and suddenly now, I can't change the brightness. I think its caused by some update. And then I went and checked my update settings, and saw that Unsupported Updates were enabled by default. So now I need to fix this brightness issue somehow. What should I do to locate the wrong update and remove it? I don't even mind removing all the updates right now. Thanks for the help. :)

    Read the article

  • DrRacket icon doesnt work?

    - by Laurie
    I installed DrRacket from the Ubuntu Software Center. All went well and an icon appeared however nothing happened when I clicked the icon so I removed it. Then went to the Developer website and downloaded full-5.3.0.21-bin-x86_64-linux-debian-squeeze.sh. I installed this via Terminal with sudo apt-get install racket. The DrRacket icon came back in Dash Home but again clicking it nothing appears to happen. How do I start DrRacket? I am running Ubuntu 12.04 LTS dual boot on a 64 bit Dell

    Read the article

  • video/audio output via HDMI Ubuntu 12.04

    - by lostNfound
    I've been out of the Ubuntu loop for quite a while now and have a completely new laptop now. Just installed Ubuntu 12.04 64-bit and would like to output my video and my audio via HDMI to my television. the following is the lspci | grep VGA for my computer. please tell me if there is any additional information needed and preferably how to obtain it and i will be more than happy to oblige. thank you in advance for your time and assistance in this matter. 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) Edit: every time i restart my computer, after a short moment, i get an error message stating something along the lines "sorry, jockey needed to close unexpectedly." after researching, i discovered jockey is the name of the "additional drivers," which after initial installation, ubuntu informed me of proprietary drivers available. those are no longer available, and this error continues to occur.

    Read the article

  • Mouse Problem on Ubuntu 12.10

    - by KashmirHackers
    I had a strange mouse problem on Ubuntu 12.10(64-Bit), the problem is that when I turnoff power supply/power goes off, the red laser light of my mouse also goes off and my mouse stops working but it works fine when A/C power supply is on. First I thought my mouse or my laptop's USB ports had problem but since I am using Dual Boot with windows 7, I checked my mouse on windows 7 and it works fine, even I turn off power supply. Today,I thought that I should give a try to Linux Mint 14-RC (which is based on same Ubuntu 12.10) and after installing linux mint when I plugged in my mouse it worked fine even though power is off. Don't know what is really going on, and I am afraid if I reinstall my Ubuntu 12.10 the problem will remain.

    Read the article

  • The error indicates that IIS is in 32 bit mode, while this application is a 64 b it application and thus not compatible.

    - by Patrick Olurotimi Ige
    I was trying to install a new WSS v3 Sharepoint on a 64 bit Windows 2003 server today but the installation was giving some error saying i would need to allow ASP.NET 2.0 in the web server extension in IIS.  Looking at the IIS there was a ASP.NET 2.0 32 bit allowed but not for a 64 bit. I tried registering the aspnet_regiis but no luck by doing so: For the 32 bit verison %SYSTEMROOT%\Microsoft.NET\Framework\v2.0.50727\aspnet_regiis.exe -i For the 64bit version %SYSTEMROOT%\Microsoft.NET\Framework64\v2.0.50727\aspnet_regiis.exe -i I get the error "The error indicates that IIS is in 32 bit mode, while this application is a 64 b it application and thus not compatible." The difference is the \Framework64 folders So my next guess was to find a way to disable the 32 bit and then allow the 64 bit version. And luckily enough i found this link    MS to the rescue So just ran : cscript %SYSTEMDRIVE%\inetpub\adminscripts\adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 0 and the registered the %SYSTEMROOT%\Microsoft.NET\Framework64\v2.0.50727\aspnet_regiis.exe -i and that was it

    Read the article

  • Windows 7 and 11.10 side by side from scratch what am I doing wrong?

    - by Bill.Caffery
    I have tried everything I can think of at this point and I'm at a total loss. I have a 2TB drive I want to install Windows 7 and 11.10 (both are 64 bit) side by side, but once I install Windows it must need gpt to work or something because no matter how many times I've removed it, it always returns. If I use gdisk and set the disk as mbr, Windows won't load. Now this last time I ran gdisk and tried to boot into Windows before I installed Ubuntu all the way and ended up at a grub rescue prompt. Any help please? Also let me say I have been searching and reading for days and have tried everything I can find to make this work so this isn't a one time event, it's continual.

    Read the article

  • Java installation for Solaris Studio 12.2

    - by DemiSheep
    I have Solaris Studio almost working. My only issue seems to be Java. Here is what I get: ============================ aflory@aflory-laptop:~$ solstudio & [1] 1723 aflory@aflory-laptop:~$ Solaris Studio is unable to find a supported version of Java. Solaris Studio supports Java version 1.6.0_13 and newer and looks for a valid Java installation in the following order: 1) Location specified with --jdkhome command line option 2) In PATH environment variable 3) At /usr/jdk/latest location, if exists 4) At /usr/java location, if exists 5) At /usr location, if exists ============================ I try typing --jdkhome in the console but I get an command not found error. I have added the following to my /home/aflory/.bashrc file: PATH=$PATH:/usr/java/jdk1.6.0_24/bin:/home/aflory/solstudio12.2/bin export PATH I am running Ubuntu 10.04 64bit. I tried installing the 64 bit version of Java JDK, then I tried installing the 32bit version of Java JDK. I don't believe there is a 64bit version of Solaris Studio.

    Read the article

  • Ubuntu slows down even after cpu-intensive process is ended

    - by Matt2
    After a Skype video call, or the use of virtualbox, Ubuntu slows down to a crawl, even after the process is ended. Running htop reveals that processes that used little CPU before are now all using about 30% cpu (namely Compiz, Firefox, Python, and Skype, but I'm sure there are others), to the point where all my cores are at 99%. All I can do from here is restart. Any idea why this is happpening? I'm running Ubuntu 12.04 64-bit on 3.7 GiB of memory, Intel® Core™ i3 CPU M 330 @ 2.13GHz × 4, VESA: M92 graphics driver. Not sure why I'm running VESA, I installed fglrx, but I suppose that's a different question. Thanks in advance!

    Read the article

  • Software Center crashes and terminal errors

    - by user97521
    *note*I'm a new user to Ask Ubuntu and I've only recently switched to Ubuntu 12.04. When I try to open the software center (Ubuntu 12.04 32-bit) it will flash open, load for maybe 1-2 seconds, and then close. When i try using: sudo apt-get purge software center sudo apt-get install sudo apt-get update sudo apt-get upgrade I get this within the terminal: Reading package lists... Error! E: Problem parsing dependency Depends E: Error occurred while processing printer-driver-hpcups (NewVersion2) E: Problem with MergeList /var/lib/dpkg/status E: The package lists or status file could not be parsed or opened. *The problem fixed itself after I shut down my laptop for the night and turned it back on to check my e-mail this afternoon. If anyone could tell me how to fix this problem in the future please do, I would like to learn about these kind of things because i don't plan on putting windows on my laptop again :P *

    Read the article

  • Python proper use of __str__ and __repr__

    - by Peter
    Hey, My current project requires extensive use of bit fields. I found a simple, functional recipe for bit a field class but it was lacking a few features I needed, so I decided to extend it. I've just got to implementing __str__ and __repr__ and I want to make sure I'm following convention. __str__ is supposed to be informal and concice, so I've made it return the bit field's decimal value (i.e. str(bit field 11) would be "3". __repr__ is supposed to be a official representation of the object, so I've made it return the actual bit string (i.e. repr(bit field 11) would be "11"). In your opinion would this implementation meet the conventions for str and repr? Additionally, I have used the bin() function to get the bit string of the value stored in the class. This isn't compatible with Python < 2.6, is there an alternative method? Cheers, Pete

    Read the article

  • Iframe pages on Facebook does not show in Internet Explorer 9 - Windows 7 64-bit

    - by Morten
    Have this very irritating problem with Internet Explorer 9 and Facebook. If I go to Facebook and watch a page with iframes (like IFBML pages) it will not show up in Internet Explorer 9. It shows up in Firefox 4 and Chrome 10, but not in Internet Explorer 9. I run Windows 7 64-bit SP1 (danish). The strange thing is that I own three different PC´s and they all run Windows 64-bit SP1 and all of them has this issue. Can´t figure out what causes this issue. I have tried the following: Uninstalled AVG antivirus and installed Microsoft Antivirus - no change Updated Windows with SP1 - no change Updated from Internet Explorer 9 beta to Internet Explorer 9 final Ed. - no change Emptied cache and temp files in Internet Explorer 9 - no change Made www.facebook.com a trusted site in Internet Explorer 9 - no change And a lot of other things I can not remember I guess....but nothing seems to work. As I´m using quite a lot of my working time developing Facebook Fanpages it is frustrating not to be able to test them in Internet Explorer 9. BTW - it is Internet Explorer 9 32-bit - not 64-bit. Any clues?

    Read the article

  • PowerShell 3.0 x64 bit broken after installing KB2506143

    - by Dave Parker
    I have searched using all kinds of variations on relevant terms and I cannot find a single other instance of someone else having this excact same problem, so I am hoping someone here may have a clue. Problem I installed Windows Management Framework 3.0 (KB2506143) by downloading and running Windows6.1-KB2506143-x64.msu from Microsoft.com. Once completed I rebooted my machine as requested. After rebooting and logging in, I try to run the 64-bit PowerShell command shell and it comes up for a second then goes away. The 32-bit shell seems to work fine, it is just the 64-bit one that fails. Looking in the Fusion logs, I found: *** Assembly Binder Log Entry (10/4/2012 @ 1:51:48 PM) *** The operation failed. Bind result: hr = 0x80070002. The system cannot find the file specified. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll Running under executable C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = ********\***** LOG: DisplayName = Microsoft.PowerShell.ConsoleHost, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL <remainder omitted> GacUtil reveals that there is a Microsoft.PowerShell.ConsoleHost, Version=1.0.0.0, but not 3.0.0.0. I tried uninstalling KB2506143 (which removed MSVCRT90.dll and caused Windows Live Messenger to fail on load after rebooting again, so I ran a repair in stall on Windows Live Essentials and that fixed the Messenger problem) and then re-installing it, but nothing changed. If it helps, here are what I think may be the relevant parts of my hardware/software environment. Environment Dell Latitude E6510, 8GB RAM Windows 7 Professional 64-bit with SP1 Visual Studio 2010 Professional installed (includes .NET 4.0) Visual Studio 2012 Professional installed Microsoft Forefront Client Security Any clues out there? Thanks, Dave

    Read the article

  • Installing 64-bit Ubuntu Server 12.04 LTS, on a VM with VMWare Player, on a 64-bit Windows 7 PC

    - by WannaBeAGeek
    I'm trying to create a VM, using VMWare Player, with an ISO image of Ubuntu Server 12.04 (LTS). The machine I'm doing the installation on has an Intel(R) Core(TM) i5 CPU, and runs 64-bit Windows 7 I managed to create the VM (gave username, password, configured network etc), but I can't install Ubuntu Server. First I get this alert : Binary translation is incompatible with long mode on this platform. Disabling long mode. Without long mode support, the virtual machine will not be able to run 64-bit code. For more details see http://vmware.com/info?id=152. When I click OK, I get another alert : This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host supports Intel VT-x, but Intel VT-x is disabled. Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. (1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.' (2) Power-cycle the host if either of these BIOS/firmware settings have been changed. (3) Power-cycle the host if you have not done so since installing VMware Player. (4) Update the host's BIOS/firmware to the latest version. For more detailed information, see http://vmware.com/info?id=152. Then, when I click OK, my VM exists, and I get back to the VMWare Player home screen. I don't know much about hardware and virtualisation, so there might be some necessary info I'm not giving. Please don't hesitate to let me know what is missing in my post, for finding solutions. Thanks :)

    Read the article

  • Help me solve my problem with NPR Media Player

    - by Calcipher
    First of, let me apologize for this getting a bit technical. Several weeks ago, I found that while using NPR's media player (e.g. click on 'Listen to the Show' - this is what I've been using as a test) the stream would suddenly halt after a minute or three. I could not get the stream to restart without reloading the page. Now, I assumed this was an issue with NPR's player and Linux (or just a bug in their stuff in general) so I began to dig, the following is what I have tried to date (please note, the tldr; option is to skip to the latest thing as I think I know what is causing the problem). Note: All testing has been done, for consistency purposes, on a clean install of Chromium with no pluggins running. My machine is Ubuntu 10.10x64. First thing I always try, I disabled all firewall stuff on the system (UFW, default deny all, allow ssh). No change, firewall back up for all additional tests unless otherwise noted. In any case, UFW is stateful, so connections it started on a non-specified on different ports will continue to work. I deleted my ~/.macromeda and ~/.adobe folders, restarted (just to be sure) and tried. Program still froze. I decided the problem might be with my install of flash, so I purged the version I had (and the home folders again). I installed the x64 version of flash from a PPA. This had no effect. I decided that the problem might be with the version of flash, so I purged the x64 version and installed the standard x32 version that comes with Ubuntu. No luck. Back to the x64 version for consistency, I decided to set up a 64-bit mini 'clone' of my system in VirtualBox. I was able to run the media player with no problem. I rsynced (in archive mode) my home directory from my real machine to the virtual machine (with bridged networking, so it was fully visible on the network). I also used a few tricks to install ALL of the same software (and repositories) from the real machine to the virtual machine. I was still able to listen to the player. I decided that the problem was with my install (after all, it had gone through two major version upgrades). As I have /home/ on a separate partition it was easy to reinstall and use the same trick from #6 to have my system up and running again within about an hour. I continue to have issues with the NPR Media Player. By this point the weekend had come. At work, I use a wired connection while at home I use a wireless connection. For some reason I forgot that I was having problems and used the NPR Media Player over the weekend. Low and behold it worked just fine at home on wireless (note: for various reasons, I could not test this on wired at home). Following from #6, I decided that the problem was either something with the network at work or still something with my account. As the latter was easier to test, I created a new account on my system and used that at work. The Media Player worked. At a loss, I decided to watch the traffic with tshark (the text based brother of wireshark) - X's to protect the innocent, I am the XXX.24.200.XXX: sudo tshark -i eth0 -p -t a -R "ip.addr == XXX.24.200.XXX && ip.addr == XXX.166.98.XXX" As you would expect, there were tons and tons of packets, but each and every time the player froze, this is what I got 08:42:20.679200 XXX.166.98.XXX - XXX.24.200.XXX TCP macromedia-fcs 56371 [PSH, ACK] Seq=817686 Ack=6 Win=65535 Len=1448 TSV=495713325 TSER=396467 08:42:20.718602 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396475 TSER=495713325 08:42:21.050183 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713362 TSER=396475 08:42:21.050221 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396508 TSER=495713362 08:42:21.680548 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713425 TSER=396508 08:42:21.680605 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396571 TSER=495713425 08:42:22.910354 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713548 TSER=396571 08:42:22.910400 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396694 TSER=495713548 08:42:25.340458 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713791 TSER=396694 08:42:25.340517 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396937 TSER=495713791 08:42:30.170698 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495714274 TSER=396937 08:42:30.170746 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=397420 TSER=495714274 08:42:39.801738 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495715237 TSER=397420 08:42:39.801784 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=398383 TSER=495715237 08:42:59.032648 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495717160 TSER=398383 08:42:59.032696 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=400306 TSER=495717160 08:43:00.267721 XXX.24.200.XXX - XXX.166.98.XXX TCP 56371 macromedia-fcs [FIN, ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=400430 TSER=495717160 08:43:00.267827 XXX.24.200.XXX - XXX.166.98.XXX TCP 56371 macromedia-fcs [RST, ACK] Seq=7 Ack=819134 Win=65535 Len=0 TSV=400430 TSER=495717160 So, as you can see, my machine is sending out a ZeroWindow packet (which I think means some buffer or another filled up) which causes the Media Player to halt (unfortunately, terminally - no controls on it really do anything anymore). Any ideas, at all, what would cause this? Why only on eth0 under my main account?

    Read the article

  • How do I get this Cisco VPN client to connect?

    - by WebWeasel
    I've got Ubuntu 10.10 64 bit and installed network-manager-vpnc and configured the connection but I keep getting this: NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4420 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 NetworkManager[1217]: <info> VPN connection 'CSI' (Connect) reply received. modem-manager: (net/tun0): could not get port's parent device NetworkManager[1217]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tun0, iface: tun0): no ifupdown configuration found. kernel: [ 2281.723506] tun0: Disabled Privacy Extensions avahi-daemon[1109]: Withdrawing workstation service for tun0. NetworkManager[1217]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: <warn> VPN plugin failed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 6 NetworkManager[1217]: <info> VPN plugin state change reason: 0 NetworkManager[1217]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. NetworkManager[1217]: <info> Policy set 'Auto eth0' (eth0) as default for IPv4 routing and DNS. NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4547 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 I've seen a couple of bugs on Launchpad that could be the same thing or have I done something wrong?

    Read the article

  • How do I make the 32-bit Perl read the 64-bit Windows registry?

    - by Santhosh
    I have a 32-bit perl installer. Using this I need to be able to install and uninstall both 32- and 64-bit applications. Installing 32- and 64-bit is fine. Uninstalling 32-bit is also ok. However, I have a problem while uninstalling 64-bit applications. The application just knows the name of the application as seen in Add Remove programs in control panel. For instance it could be "Winzip 14.0" which is the display name for Winzip. I use the following approach for uninstallation : I traverse to HKLM/Software/Microsoft/Windows/CurrentVersion/Uninstall and parse the keys present there to see if Winzip is matching. If so i get the uninstall string from there. my $register = "SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall"; $HKEY_LOCAL_MACHINE->Open($register,$hKey)|| die $!; #Then parse all the nodes and fetch the uninstall string If the application is a 64-bit installation, then the uninstallation information will reside in HKLM/Software/Microsoft/Windows/CurrentVersion/Uninstall. However the above given perl installer code is trying to read from HKLM/Software/WOW6432Node/Microsoft/Windows/CurrentVersion/Uninstall and it does not find the installation there. So how do I make the Perl code running in a 32_bit process to read the registry value found in 64-bit hive? I am aware of the RegOpenKey() API that takes KEY_WOW64_64KEY parameter. But since it is a Windows API, I dont know if that will help. Even then, is there any other alternative?

    Read the article

  • Installation taking a very long time, hangs at "Configuring bcmwl-kernel-source"

    - by user290522
    I am installing Ubuntu 14.04(32-bit) on my laptop (Compaq Presario V2000), and after about 7 hours, it is still in Configuring bcmwl-kernel-source (i386) mode. The messages I read are as follows: ubuntu kernel: [22814.858163] ACPI: \_SB_.PCI0.LPC0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported with the numbers in the square brackets increasing. I have had Windows XP professional on this laptop, and I am erasing it. I am not sure if I should turn off the laptop, and start all over again. About 4 years ago I installed Ubuntu on this laptop, and that was very fast. The only problem I encountered was my wireless, and could not make it to work, and switched back to Windows. I appreciate any comments regarding this installation taking such a long time. After 40 hours the installation was still in configuring mode with the following messages: ubuntu CRON[29329]: (root) CMD ( cd/ && run-part .. report /etc/cron-hourly) I did the following to check for errors: pressed ctrl-alt-f2. This time the system froze. I had no other choice but to turn off the laptop, and start all over again. The exact model of the laptop is "Compaq Presario V2069CL Notebook PC" with AMD processor.

    Read the article

  • Where is the Flash in Chrome?

    - by Daniel
    I installed Google Chrome. This is the first thing I did after installing Ubuntu. I went into firefox, and went to chrome.google.com, and hit the button. I don't like package managers, and avoid the command line like the pox. Then, I started using Google Chrome. I went to Kongregate, and clicked on a game. It told me I didn't have flash. A few different websites told me the same. I assumed that they must have been wrong. I hit the link to Adobe, to install Flash, and it reassured me; of course, Google Chrome includes Flash. I checked my version - Chrome 5.0.375.126. Of course, I just downloaded it. I scoured the internet for solutions. None worked. Many seemed to involve re-enabling Flash, or something like that. But insofar as I can tell, there is no Flash anywhere in my Chrome. I feel like I bought a Reese's cup, and found solid chocolate. I checked in the Chrome plugin manager, and everything. A few solutions told me to copy some garbage into my command line and hit enter (as almost all solutions to problems on linux entail). I did it, reluctantly, and it did nothing. I thought Flash was supposed to come with Chrome. But it didn't. Sooooo... What gives? Google Chrome version: Google Chrome 5.0.375.126 (Official Build 53802) WebKit 533.4 V8 2.1.10.15 User Agent Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.126 Safari/533.4 Command Line /opt/google/chrome/google-chrome Operating System: Ubuntu 10.4 64 bit.

    Read the article

  • Migration of .NET COM object to 64 bit.

    - by Victor Ronin
    Hi, We have C++ application which uses several COM object. COM object are .NET based (using COM Interop). I need to migrate application to 64 bit. I specifically need C++ application to be 64 bit. I don't want to recompile all of .NET com object to 64 bit and deliver two sets of DLL's (32 bit and 64 bit). I was investigating and found that I can load 32 bit COM Dll's in 32 bit surrogate process using (DllSurrogate in registry). I know how to do that, but it means that all COM objects will become out of process. In the C++ I had the code: CoCreateInstance(CLSID_SomeClass, NULL, CLSCTX_INPROC_SERVER, IID_SomeInterface, (void**)&pobj); It worked fine, but as soon as I switch to CLSCTX_LOCAL_SERVER (and add registry keys for DllSurrogate), it can't find interfaces (error 0x80004002). I checked registry and found out that when .NET COM DLL is registered, it adds ClsID registry keys, but doesn't add Interface and TypeLib registry key. The question is, how to create these registry keys for .NET COM? Regards, Victor

    Read the article

  • Java error on bilinear interpolation of 16 bit data

    - by Jon
    I'm having an issue using bilinear interpolation for 16 bit data. I have two images, origImage and displayImage. I want to use AffineTransformOp to filter origImage through an AffineTransform into displayImage which is the size of the display area. origImage is of type BufferedImage.TYPE_USHORT_GRAY and has a raster of type sun.awt.image.ShortInterleavedRaster. Here is the code I have right now displayImage = new BufferedImage(getWidth(), getHeight(), origImage.getType()); try { op = new AffineTransformOp(atx, AffineTransformOp.TYPE_BILINEAR); op.filter(origImage, displayImage); } catch (Exception e) { e.printStackTrace(); } In order to show the error I have created 2 gradient images. One has values in the 15 bit range (max of 32767) and one in the 16 bit range (max of 65535). Below are the two images 15 bit image 16 bit image These two images were created in identical fashions and should look identical, but notice the line across the middle of the 16 bit image. At first I thought that this was an overflow problem however, it is weird that it's manifesting itself in the center of the gradient instead of at the end where the pixel values are higher. Also, if it was an overflow issue than I would suspect that the 15 bit image would have been affected as well. Any help on this would be greatly appreciated.

    Read the article

  • Copying files to zfs mountpoint doesn't work - the files aren't actually copied to the other filesystem,

    - by user113904
    I have 3 x 4 TB disks in a NAS that I want to group together and access as if they were one whole 'unit' of some kind. I also have a 250GB disk containing the OS - this is full of films and tv shows currently. I thought zfs sounded good so I created a raidz zpool, after installing the ppa sudo zpool create store raidz /dev/sdb /dev/sdc /dev/sdd and set the mountpoint to /mnt/store sudo zfs set mountpoint=/mnt/store /store checked it was successful - I think it was sudo zfs list NAME USED AVAIL REFER MOUNTPOINT store 266K 7.16T 170K /mnt/store Then I wanted to move over a whole load of files from my home directory. I went to where the to-be-copied folder was (called media) and entered sudo cp -R * /mnt/store cp: cannot create directory `/mnt/store/media': No space left on device It seems like it's not copying over to the new filesystem I made (or thought I did). I've never really done this type of thing until a few days ago so may be running before I can walk... is this not the right way to copy files across? I've only used windows before so the idea of mountpoints is a bit mind boggling. I'm using XBMCbuntu 12 beta 2.0 which is based on 12.04. Will retry with normal Ubuntu 12.04 desktop to see if that's the problem. thanks for the help!

    Read the article

  • Installing LBP 2900 printer -> libs folders wrong?

    - by Peter Smit
    I am trying to get my Canon LBP2900 printer to work on Ubuntu 11.10 64 bit. What I have done is try to follow the steps on https://help.ubuntu.com/community/CanonCaptDrv190 So I downloaded the version 2.3 driver and tried to convert the rpm files to debian and installed them sudo alien cndrvcups-capt-2.30-1.x86_64.rpm cndrvcups-common-2.30-1.x86_64.rpm sudo dpkg -i cndrvcups-capt-2.30-1.x86_64.deb cndrvcups-common-2.30-1.x86_64.deb restarted cups and try to install the printer with lpadmin: sudo service cups restart sudo /usr/sbin/lpadmin -p LBP2900 -m /usr/share/cups/model/CNCUPSLBP2900CAPTK.ppd -v ccp://localhost:59787 -E What I noticed however that on the step with lpadmin it goes wrong with the error: lpadmin: Bad device-uri scheme "ccp" After trying to trace what has gone wrong, I think I nailed it to the fact that dpkg installed a file /usr/lib64/cups/backend/ccp instead of /usr/lib/cups/backend/ccp Checking the original rpm with archive manager shows indeed that /usr/lib and /usr/lib64 are used, with the backend/cpp file only installed in lib64. As I understand correctly, Ubuntu 11.10 uses /usr/lib32 and /usr/lib instead so the files are installed in the wrong place. Is there an automated method of converting the rpm/deb files with the wrong lib structure to one with the right lib structure for ubuntu 11.10? Or am I completely on the wrong track for getting my printer installed?

    Read the article

  • SmartView 11.1.2.2.103 - Support for MS Office 64 added

    - by THE
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 (thanks to Nancy, who shared this with me)  New for Smart View v11.1.2.2.103, Patch 14362638,   Microsoft Office 64-bit is now supported:  Information for 64-Bit Microsoft Office Installations: In this release, Smart View supports the 64-bit version on Microsoft Office. If you use 64-bit Office, please note the following: Oracle provides separate Smart View installation files for 64-bit and 32-bit Office systems. . smartview-x64.exe is the file for 64-bit Office installations. smartview.exe is the file for 32-bit Office installations. The 64-bit version of Smart View pertains only to the 64-bit version of Microsoft Office and not to the version of the operating system. Customers with 64-bit operating systems and the 32-bit version of Microsoft Office should install the 32-bit version of Smart View. You cannot install the 64-bit version of Smart View from EPM Workspace (13530466). Although Planning Offline is supported for 64-bit operating systems, it is not supported for 64-bit Smart View installations. If you use Planning Offline with Smart View, you must use the 32-bit version of Smart View and the 32-bit version of Microsoft Office. In 64-bit versions of Excel 2010 SP1, the presence of Smart View functions may cause Excel to terminate abruptly and may prevent Copy Data Point and Paste Data Point functions from working. This is a Microsoft issue, and a service request has been filed with Microsoft. Workaround: Until the Microsoft fix, use the 32-bit version of Smart View. (13606492) The Smart View function migration utility is not supported on 64-bit Office. (14342207) /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >