Search Results

Search found 2018 results on 81 pages for 'bayesian networks'.

Page 27/81 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Windows 7, network connection with no default gateway: any way to change the "Unknown network" statu

  - by e-t172

  Hi, I have a computer running Windows 7 Pro RTM. This computer has two network connections: A Wi-fi connection to the Internet (through a home router) which works just fine. An OpenVPN virtual network connection. More precisely, this is a virtual Ethernet connection which behaves exactly like a physical Ethernet wired connection. My problem is that the "Network and sharing center" shows "Unknown network" for the OpenVPN connection. After some research I found that logical networks (outside a domain) are identified by the MAC address of the default gateway of the connection. Problem is, the OpenVPN connection has no default gateway: it is a private network, so I don't need one... Consequently, the "Unknown network" is always considered public, so the firewall is always in "public mode", which I don't want. Plus, I can't rename "Unknown connection" or anything (which makes sense), so it is kinda ugly. My goal is to define a proper logical network for the OpenVPN connection with the private profile. I know of some workarounds (disable the firewall, modify security policy to make all unknown networks "private") but they're still workarounds. I just want my clients to connect to the VPN without having to disable their firewall settings, without changing global configuration with potential side-effects (the "security policy" solution) and without having to look at an ugly "Unknown connection" in the Network and sharing center. Is there any way I can do this? I tried to check what was going on in the registry (HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList is interesting), but I still didn't find a way to "force" the OpenVPN connection to be assigned to a logical network. Any help would be very appreciated. A related question showed up at Superuser: http://superuser.com/questions/37355/windows-7-cant-identify-network/37422

  Read the article

• Persistent static route stops working after VPN drops and reconnects

  - by user76157

  I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can only do dial-out VPN. So I've got a Windows 2008 server on Network B acting as a VPN server (ServerB). Network A's router (RouterA) passes through Network B's router and connects via PPTP to ServerB. RouterA is assigned the static IP 192.168.0.40 on Network B. There's a persistent static route on ServerB telling it to use 0.40 for all requests to Network A's subnet, 192.168.1.0. (route -p add 192.168.1.0 mask 255.255.255.0 192.168.0.40). This enables ServerB to ping all machines on A (and those machines to ping ServerB). The VPN connection occasionally drops (I'm not sure why - it's set to remain always on and seems to drop randomly). This wouldn't be too much of a problem, as it reconnects automatically and quickly, except that when it does reconnect, the static route on ServerB no longer works. Route print (on ServerB) shows that the persistent static route still exists. However a tracert to a machine on Network A doesn't use the static route; it tries instead to use ServerB's default gateway (which is RouterB), and fails to find the machine. Deleting and re-adding the static route fixes the problem - a tracert uses the static route. At the moment, a batch file to delete and re-add the static route is scheduled to run every day. But this is clearly far from an ideal solution! I hope that's not too confusing. Any help would be very much appreciated.

  Read the article

• What is the correct iptables rule when NATing multiple private subnets?

  - by Jose Mendez

  I have a Centos minimal 6.5 acting as a router. eth0 is connected to a Cisco switch trunk port, allowing VLANs 200-213. I have several VLAN interfaces just as this link suggests: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-networkscripts-interfaces_802.1q-vlan-tagging.html And have IPv4 forwarding, so all my network devices from any of the networks 200-213 can communicate with each other using this linux box as their router. Problem is, I need them to access the Internet, so I added the following rule: iptables -t nat -A POSTROUTING -s 192.168.0.0/16 -j SNAT --to 1.1.1.56 1.1.1.56 is the "outside" address. This works fine, devices connected to the internal networks can ping Intertnet addresses BUT, they stop being able to talk to each other across subnets, so 192.168.211.55 can ping 8.8.8.8, but can't talk to 192.168.213.5. As soon as I do a service iptables restart to remove the rule, I can start talking across internal subnets again. What would be the correct way to set up NAT for multiple private subnets? Or maybe the correct way to set up forwarding?

  Read the article

• Handheld Linux device can't see one wireless network

  - by Nathan

  I'm using a Nokia N810 running OS 2008 (version 5.2008.43-7; should be the latest). It can see networks up and down the street in my neighborhood and can connect to mine using WEP. I can also connect to free networks at restaurants and the like. When I bring it into work, it can't see a wireless network ("No connections available"). When I use netstumbler on my laptop I can see a list of several essids showing green connectivity for the network. I know that the network has its essid broadcast, and I know that it's unsecured. When I run iwlist wlan0 scan, I see several APs with no essid, but I don't see anything with an essid set. I have verified using iwlist that my hardware supports the correct channels and speeds. I know this isn't a Nokia/mobile forum, but it's running what's basically a Debian kernel. Any suggestions on what to do in this case? I'm really frustrated by this. Thanks, Nathan

  Read the article

• Datacenter IP Addressing and DNS Management

  - by user65248

  Hello everyone Basically we are setting up a small Datacenter, about 300 amps power and max 50 racks, Im saying these coz I wanna u imagine the size and requirements, I have studied networking mostly Microsoft and Windows based systems , but I cant get how the IP addressing and DNS management and configuration works in a Datacenter , and unfortunately I have to setup everything by myself but defe we will have some staff to do some job. Now my questions Datacenter IP Addressing Suppose we have got a block of 200 IP addresses from our ISP, How can I manage these block of IP addresses, is there any software out there to simplify this I heard that using DHCP server in a datacenter is not recommended, otherwise what would u say about MS DHCL server ofc considering we need to have backup serversin case of failur How can I assign a block of IPs to a specific rack, I know with different software and management its different but Im asking how it is done normally IP addresses are exposed to the whole network, what if a customer try to use an IP address and is not assigned to their server or rack , how can I prevent this or how can I track the IP usage DNS Management Im goin to setup at least two servers for our DNS servers, I know nothing about Datacenter DNS system, but I have configured DNS server in normal networks and also for webservers, Now I wanna know What exactly needs to be done for a DNS in a datacenter that is not done for normal networks. How can I configure PTR records why cant I configure PTR records on my webserver side DNS server and it should be done on datacenter DNS server , I mean what is the difference in DC DNS servers that allow us to to so , I know the question is very silly and simple but Im confused Is there any software outthere to allow doing the whole thing, I mean automatically add records to the DNS and also managin IP addresses !? Thanks in advance

  Read the article

• ISA Server dropping packets as it believes they are spoofed

  - by RB

  We have ISA Server 2004 running on Windows Server 2003 SP2. It has 2 NICs - one internal called LAN on 192.168.16.2, with a subnet of 255.255.255.0, and one external called WAN on 93.x.x.2. The default gateway is 93.x.x.1 (our modem). This machine also accepts VPN connections. We are having a problem with a scanner, which is trying to save a scan into a network share. Every time we try to scan, ISA Server logs the following Denied Connection Log type: Firewall service Status: A packet was dropped because ISA Server determined that the source IP address is spoofed. Rule: Source: Internal ( 192.168.16.54:1024) Destination: Internal ( 192.168.16.255:137) Protocol: NetBios Name Service Pinging 192.168.16.54 from the ISA Server works fine. In ISA Server, going into Configuration → Networks, there are 5 Networks : - External (inbuilt) - Internal (defined as 192.168.16.0 → 192.168.16.255) - Local Host (inbuilt) - Quarantined VPN Clients (inbuilt) - VPN Clients (inbuilt) Finally, under Network Connections → Advanced → Advanced Settings..., the connections are in the following order : - LAN - WAN - [Remote Access Connections] If we try to scan onto a workstation it works fine. Please let me know if you need any more info - many thanks. RB.

  Read the article

• I can't connect to my network, except in safe mode

  - by eidylon

  My laptop cannot connect to my network all of a sudden except in safe mode. When it boots, it will show the networks available in the tray popup, but if I click connect on any, it says "Unable to connect" and the troubleshooter is useless. Shortly thereafter all the networks disappear. I have tried removing IPv6 support as I have seen that cause problems. No joy. I've also tried removing the wireless network adapter in Device Manager and reinstalling it, also no joy. I've also tried attaching a USB wireless adapter, and it has the same problem. If I boot in safe mode, then it has no problems at all. Three other devices in the house connect fine, so I am pretty sure it is nothing to do with the router. Any ideas what to check next? I am running Win7 Ultimate on a 2GHz Quadcore with 8GB RAM with a Broadcom 802.11n wireless card. EDIT: RE wired connections: What is very weird is that if i plug in a wired connection, then not only does it connect via the wired connection, but the wireLESS also starts working perfectly. And a soon as I unplug the wire, then the wireLESS stops working again! So it seems the wireless is right now working only in safe-mode, or when a wired connection is also plugged in.

  Read the article

• Windows XP can't connect to wireless network

  - by mikez302

  I have a desktop computer with a wireless card, running Windows XP SP3. For a little while, I had a remote network connection set up for my job, but I didn't need the remote connection so I deleted it. Now, I am unable to connect to the internet at all from that computer through my wireless router. I can connect through my router using my laptop, and I can connect through my neighbor's router using my desktop, but for some reason I can't connect through my own router using my desktop. I see the "Wireless Network Connection 5" icon in my system tray, but it tells me it is not connected. When I click on the icon, I see a list of wireless networks, including my own, which is set up to automatically connect, although it doesn't. When I try to connect to my network on my own (by clicking on it, then clicking "Connect"), it asks me for my network password like it usually does. I see a box come up saying "Waiting for network to be ready..." and it hangs there. On the list of wireless networks, my network says "Acquiring network address" but it doesn't actually connect. How can I fix this? I tried rebooting my computer, repairing my connection, and restarting my router, and I am still having this problem.

  Read the article

• Private staff network within public network

  - by pianohacker

  I'm the sysadmin at a small public library. Since I got here a few years ago, I've been trying to set up the network in a secure and simple way. Security is a little tricky; the staff and patron networks need to be separated, for security reasons. Even if I further isolated the public wireless, I'd still rather not trust the security of our public computers. However, the two networks also need to communicate; even if I set up enough VMs so they didn't share any servers, they need to use the same two printers at the very least. Currently, I'm solving this with some jerry-rigged commodity equipment. The patron network, linked together by switches, has a Windows server connected to it for DNS and DHCP and a DSL modem for a gateway. Also on the patron network is the WAN side of a Linksys router. This router is the "top" of the staff network, and has the same Windows server connected on a different port, providing DNS and DHCP, and another, faster DSL modem (separate connections are very useful, especially as we heavily depend on some cloud-hosted software). tl;dr: We have a public network, and a NATed staff network within it. My question is; is this really the best way to do this? The right equipment would likely make my job easier, but anything with more than four ports and even rudimentary management quickly becomes a heavy hit on our budget. (My original question was about an ungodly frustrating DHCP routing issue, but I thought I'd ask whether my network was broken rather than asking about the DHCP problem and being told my network was broken.)

  Read the article

• OpenWRT + OpenVPN client forwarding from lan to vpn not working

  - by Dariusz Górecki

  I've OpenWRT router with Backfire 10.03.1-rc3 (arch:brcm 2.6 kernel) I've set up an OpenVPN client connecting my router with workplace lan, and it works nicely, I can connect from router to networks (several) in workplace. My OpenVPN client uci-config looks like: config 'openvpn' 'stream_client' option 'nobind' '1' option 'float' '1' option 'client' '1' option 'reneg_sec' '0' option 'management' '127.0.0.1 31194' option 'explicit_exit_notify' '1' option 'verb' '3' option 'persist_tun' '1' option 'persist_key' '1' list 'remote' 'remote.address.cutted' option 'ca' '/lib/uci/upload/cbid.openvpn.stream_client.ca' option 'key' '/lib/uci/upload/cbid.openvpn.stream_client.key' option 'cert' '/lib/uci/upload/cbid.openvpn.stream_client.cert' option 'enable' '1' option 'dev' 'tun1' I've set the 'STREAM_VPN' Zone to allow in/out traffic, and I've added rules for zone-to-zone lan<-vpn and vpn<-lan config 'zone' option 'name' 'stream_vpn' option 'network' 'stream_vpn' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'forwarding' option 'src' 'lan' option 'dest' 'stream_vpn' config 'forwarding' option 'src' 'stream_vpn' option 'dest' 'lan' And interface config: config 'interface' 'stream_vpn' option 'proto' 'none' option 'ifname' 'tun1' option 'defaultroute' '0' option 'peerdns' '0' Now, from my router everything works nicely, the problem is that I cannot connect from computer inside a lan to hosts in networks provided by vpn connection :/ What I've missed, or what I'm doing wrong? And how can I force using specified DNS when connected to vpn? (I know that sever should use PUSH DNS option, but is PUSHes only routes)

  Read the article

• Outlook won't re-connect to exchange after network is re-connected

  - by stan503

  I have a setup at my desk where I connect my computer to a an RJ45 switch that switches between two networks. One network is the corporate network, which is maintained by my company's IT, and the other is my own private network where I do testing (the two networks have to be separated). The corporate network hosts the exchange server where I get e-mail. When I switch from the private network to the corporate network, I expect Outlook to re-connect to the exchange server. However, I have found that sometimes when I come back, Outlook take an extremely long time to re-connect. Send/Receive will give me back the error 'The server is not available' (0x8004011D). It will sit there for 10 minutes to a few hours before it finally re-connects. The only other option is to reboot my computer, which is a huge pain for me since I run multiple VMs on it. This usually happens when I'm connected to the private network for a significant amount of time, so I'm thinking it's because Outlook has cached the network status. Is there a way to force Outlook to do a 'hard' re-connect to the exchange server? I'm using Windows XP SP 3 with Outlook 2007.

  Read the article

• EMC VNX iSCSI setup - unsure about SP/port assignment

  - by pauska

  We have a new VNX5300 waiting to get configured, and I need to plan out the network infrastructure before the EMC tech arrives. It has 4x1gbit iSCSI per SP (8 ports in total), and I'd like to get the most out of the performance until we jump over to 10gig iSCSI. From what I can read from the docs - the recommendation is to use only two ports per SP, with 1 active and 1 passive. Why is this? It seems kind of pointless to have quad-port i/o-modules and then recommend to not use more than two of them? Also - I'm a bit unsure about the zoning. The best practices guide state that you should separate each port on each SP from each other on different logical networks. Does this mean that I have to create 4 logical networks to be able to use all 8 ports? It also gives the following example: Does this mean that A0 and B0 should sit on the same physical switch aswell? Won't this make all traffic go on one switch (if both A1 and B1 are passive)? Edit: Another brainpuzzle I don't get it - each host (as in server) should not have more iSCSI bandwidth available than the storage processor. What on earth does this matter? If serverA have 1gbit and serverB have 100mbit, then the resulting bandwith between them is 100mbit. How can this result in some kind of oversubscription? Edit4: Wait, what. Active and passive ports? The VNX runs in a ALUA configuration with asymmetrical active/active.. there shouldn't be any passive ports, only preferred ones..

  Read the article

• Switch to IPv6 and get rid of NAT? Are you kidding?

  - by Ernie

  So our ISP has set up IPv6 recently, and I've been studying what the transition should entail before jumping into the fray. I've noticed three very important issues: Our office NAT router (an old Linksys BEFSR41) does not support IPv6. Nor does any newer router, AFAICT. The book I'm reading about IPv6 tells me that it makes NAT "unnecessary" anyway. If we're supposed to just get rid of this router and plug everything directly to the Internet, I start to panic. There's no way in hell I'll put our billing database (With lots of credit card information!) on the internet for everyone to see. Even if I were to propose setting up Windows' firewall on it to allow only 6 addresses to have any access to it at all, I still break out in a cold sweat. I don't trust Windows, Windows' firewall, or the network at large enough to even be remotely comfortable with that. There's a few old hardware devices (ie, printers) that have absolutely no IPv6 capability at all. And likely a laundry list of security issues that date back to around 1998. And likely no way to actually patch them in any way. And no funding for new printers. I hear that IPv6 and IPSEC are supposed to make all this secure somehow, but without physically separated networks that make these devices invisible to the Internet, I really can't see how. I can likewise really see how any defences I create will be overrun in short order. I've been running servers on the Internet for years now and I'm quite familiar with the sort of things necessary to secure those, but putting something Private on the network like our billing database has always been completely out of the question. What should I be replacing NAT with, if we don't have physically separate networks?

  Read the article

• Wireless card overheating?

  - by Sidney

  Ok, so I've had my laptop for several years (I wanna say 4, but possibly more), it's a Toshiba Satellite. I'm running Linux mint 15, and am having a strange new issue, after several hours of running my wireless stops. It can SEE wireless networks, but refuses to connect to any of them. (On a sidenote, connecting to a router with a cable at this point works fine) The fact that it can SEE the networks make me think the card is in good condition, and it's software related The fact that it works for several hours before booting me makes me think perhaps the transmitter is getting too hot. I don't use my laptop in dusty environments, and keep it on an elevated surface (alternatively, I actively try not to let it sit on soft surfaces where the vents get covered). I spray out the cpu fan about once a year with compressed air about once a year, so I really don't think the insides should be too dirty. Finally, unfortunately, sensors only gives me CPU temps, but they run about 40-50 degrees C, which from my understanding is perfectly normal for an I3. Does anyone have any suggestions on what I can do to determine the root cause of this?

  Read the article

• Slow RDP after server joins domain

  - by Chris Grove

  We're having RDP issues with Amazon cloud servers that we recently joined to an Active Directory domain. The setup is: A local office network A virtual private cloud in Amazon An IPSec tunnel between the two networks A number of Windows 2008 R2 servers on both networks An AD domain (call it abc.net), with one domain controller in each network. The domain controllers are both new, fresh installs. Before we had the domain set up we had local accounts for the cloud computers which were used for RDP access. Our idea was to get all of the servers on to the domain so we could use domain logins instead of per-server local logins. Before the cloud servers were in the domain, RDP (from the office network or through a VPN to the cloud) worked great. After we joined the cloud servers to the domain, RDP from the office became very slow - a few minutes to log in, long frequent pauses when the interface is unresponsive, generally just a slow and frustrating experience. This is a problem regardless of whether a domain or local login is used for RDP. Oddly, when outside of the office network and connecting to the cloud directly with the VPN, RDP is still very responsive. Any idea why RDP from office to cloud is suddenly very slow after the cloud servers join the domain? What can I look at in our configuration to address this? Any help is greatly appreciated.

  Read the article

• VPN into multiple LAN Subnets

  - by Rain

  I need to figure out a way to allow access to two LAN subnets on a SonicWall NSA 220 through the built-in SonicWall GlobalVPN server. I've Googled and tried everything I can think of, but nothing has worked. The SonicWall NSA management web interface is also very unorganized; I'm probably missing something simple/obvious. There are two networks, called Network A and Network B for simplicity, with two different subnets. A SonicWall NSA 220 is the router/firewall/DHCP Server for Network A, which is plugged into the X2 port. Some other router is the router/firewall/DHCP server for Network B. Both of these networks need to be managed through a VPN connection. I setup the X3 interface on the SonicWall to have a static IP in the Network B subnet and plugged it in. Network A and Network B should not be able to access each other, which appears the be the default configuration. I then configured and enabled VPN. The SonicWall currently has the X1 interface setup with a subnet of 192.168.1.0/24 with a DHCP Server enabled, although it is not plugged in. When I VPN into the SonicWall, I get an IP address supplied by the DHCP Server on the X1 interface and I can access Network A remotely although I do not have access to Network B. How can I allow access to both Network A and Network B to VPN clients although keep devices on Network B from accessing Network A and vice-versa. Is there some way to create a VPN-only subnet (something like 10.100.0.0/24) on the SonicWall that can access Network A and Network B without changing the current network configuration or allowing devices on both netorks "see" each other? How would I go about setting this up? Diagram of the network: (Hopefully this kind of helps) WAN1 WAN2 | | [ SonicWall NSA 220 ]-(X3)-----------------[ Router 2 ] | | (X2) 192.168.2.0/24 10.1.1.0/24 Any help would be greatly appriciated!

  Read the article

• Configuring two nearby WLANs: should I use the same ssid?

  - by Rory

  I'm configuring a home network for basic internet use (ie don't really need connectivity between workstations on the network). My brick walls mean a single wireless router doesn't provide good coverage throughout the house, so I have purchased two powerline adapters and now have the incoming modem/wireless router at one end of the house plugged into a powerline adapter, and at the other end of the house the other powerline adapter plugged into another wireless router. Currently the two wireless networks have different ssids. (The powerline adapters only do power-Ethernet; they're not wireless access points themselves.) This works well, except when I move between rooms and would ideally like my devices (iPad, phones, laptops) to switch from the weak to the strong signal. Sometimes there's enough signal that they hold on to the weak connects instead of switching to the strong one. Should I name the two networks the same ssid, and if so what is the actual effect? Do the signals get confused, is the bandwidth affected, will this help my devices seamlessly move from one to the other, or is the ssid just a cosmetic thing that actually doesn't have any impact on this situation? Are there any other settings that I should configure to make my setup optimal?

  Read the article

• Wi-Fi won't automatically connect (box in Windows configuration gets unchecked)

  - by greg88

  The checkbox that says "Use windows to configure my wireless network settings" keeps getting unchecked (Wirless Network Connection - Change advanced settings - Wireless networks tab.) How do I stop that from happening? (So the wi-fi will reconnect.) When I manually re-check the box, it automatically connects.) I have a D-Link AirPremier DWL-G550 PCI adapter. I installed the newest driver, 5.3.0.46, and that didn't solve the problem. I took the "Atheros Client Utility" (the program window says "D-Link AirPremier Client Utility" when you run it) out of the start menu, rebooted, and that didn't solve the problem. (That utility puts a signal bar similiar to the one MS Windows puts there, and it's gone now.) The D-Link client utility has an option to automatically connect to preferred networks, but it is greyed out. It is also greyed out if I install the driver and utility right off the D-Link installation CD, so the problem isn't that the utility and driver are incompatible versions. I want to use Windows to handle the connection anyway, as the D-Link utility is garbage. Windows XP SP3 w/all current updates.

  Read the article

• Randomly unusable wireless connection. Oddest issue ever...

  - by Hallucynogenyc

  I have two desktop computers a laptop and a smartphone. All of them connect perfectly to my router (WRT54GL with Tomato firmware), but randomly (once a week maybe) something odd happens: For over an hour or so one of the desktop computers (Windows 7 Pro x64) will just refuse to connect properly to the router. Only that computer and only to that network. I can connect all the other machines to the router perfectly and I can connect properly to other networks with that machine. What I mean by "not being able to connect properly" I mean that the OS will just tell me "not able to connect to.." or that it will connect but then say that it has no Internet access or it connects but will then take minutes to load any website, even the router web interface. I've tried to change from WPA2 to WEP and back to WPA2, I've tried different network adapters (one internal PCI card and one USB external card), removing networks from Windows and adding again... without making any difference. It works for some days but at the end, it ends happening at some time. I just have no clue on what the hell could be going on here. I first thought it was the network adapter, then the router, then Windows... Thanks in advance

  Read the article

• CodePlex Daily Summary for Monday, November 07, 2011

  CodePlex Daily Summary for Monday, November 07, 2011Popular ReleasesGoogleMap Control: GoogleMap Control 6.0: Major design changes to the control in order to achieve better scalability and extensibility for the new features comming with GoogleMaps API. GoogleMap control switched to GoogleMaps API v3 and .NET 4.0. GoogleMap control is 100% ScriptControl now, it requires ScriptManager to be registered on the pages where and before it is used. Markers, polylines, polygons and directions were implemented as ExtenderControl, instead of being inner properties of GoogleMap control. Better perfomance. Better...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: V2.1: Version 2.1 (click on the right) this uses V4.0 of .net Version 2.1 adds the following features: (apologize if I forget some, added a lot of little things) Manual Lookup with TV or Movie (finally huh!), you can look up a movie or TV episode directly, you can right click on anythign, and choose manual lookup, then will allow you to type anything you want to look up and it will assign it to the file you right clicked. No Rename: a very popular request, this is an option you can set so that t...Bulk Copy Test Cases Tool for Microsoft Test Manager & TFS: Bulk Copy Test Cases Tool: A while ago I had written a blog post Microsoft Test Manager Test Case Versioning on how to manage Test Cases over multiple releases which required you to manually copy test cases individually. Now there is a tool to help with the bulk copying of Test Cases that updates the Iteration field at the same time.Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 0.9.9 Update 2: Self-Tracking Entity Generator v 0.9.9 for Entity Framework 4.0. No change to the self-tracking entity generator v 0.9.9. WPF sample (SchoolSample) is updated with unit testing for both ViewModel and Model classes.SubExtractor: Release 1020: Feature: added "baseline double quotes" character to selector box Feature: added option to save SRT files as ANSI (instead of previous UTF-8 only) Feature: made "Save Sup files to Source directory" apply to both Sup and Idx source files. Fix: removed SDH text (...) or [...] that is split over 2 lines Fix: better decision-making in when to prefix a line with a '-' because SDH was removedAcDown????? - Anime&Comic Downloader: AcDown????? v3.6.1: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6.1?? ??.hlv...Track Folder Changes: Track Folder Changes 1.1: Fixed exception when right-clicking the root nodeKinect Toolbox: Kinect Toolbox v1.1.0.2: This version adds support for the Kinect for Windows SDK beta 2.MapWindow 4: MapWindow GIS v4.8.6 - Final release - 32Bit: This is the final release of MapWindow v4.8. It has 4.8.6 as version number. This version has been thoroughly tested. If you do get an exception send the exception to us. Don't forget to include your e-mail address. Use the forums at http://www.mapwindow.org/phorum/ for questions. Please consider donating a small portion of the money you have saved by having free GIS tools: http://www.mapwindow.org/pages/donate.php What’s New in 4.8.6 (Final release) · A few minor issues have been fixed Wha...Kinect Mouse Cursor: Kinect Mouse Cursor 1.1: Updated for Kinect for Windows SDK v1.0 Beta 2!Coding4Fun Kinect Toolkit: Coding4Fun Kinect Toolkit 1.1: Updated for Kinect for Windows SDK v1.0 Beta 2!Async Executor: 1.0: Source code of the AsyncExecutorMedia Companion: MC 3.421b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) TV Show Resolutions... Fix to show the season-specials.tbn when selecting an episode from season 00. Before, MC would try & load season00.tbn Fix for issue #197 - new show added by 'Manually Add Path' not being picked up. Also made non-visible the same thing in Root Folders...Nearforums - ASP.NET MVC forum engine: Nearforums v7.0: Version 7.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: UI: Flexible layout to handle both list and table-like template layouts. Theming - Visual choice of themes: Deliver some templates on installation, export/import functionality, preview. Allow site owners to choose default list sort order for the forums. Forum latest activity. Visit the project Roadmap for more details. Webdeploy packages sha1 checksum: e6bb913e591543ab292a753d1a16cdb779488c10?????????? - ????????: All-In-One Code Framework ??? 2011-11-02: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??????，11??，?????20????Microsoft OneCode Sample，????6?Program Language Sample，2?Windows Base Sample，2?GDI+ Sample，4?Internet Explorer Sample?6?ASP.NET Sample。?????????????。 ????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 Program Language CSImageFullScreenSlideShow VBImageFullScreenSlideShow CSDynamicallyBuildLambdaExpressionWithFie...Python Tools for Visual Studio: 1.1 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.1 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python programming language. This release includes new core IDE features, a couple of new sample libraries for interacting with Kinect and Excel, and many bug fixes for issues reported since the release of 1.0. For the core IDE features we’ve added many new features which improve the basic edit...BExplorer (Better Explorer): Better Explorer 2.0.0.631 Alpha: Changelog: Added: Some new functions in ribbon Added: Possibility to choose displayed columns Added: Basic Search Fixed: Some bugs after navigation Fixed: Attempt to fix slow navigation and slow start Known issues: - BreadcrumbBar fails on some situations - Basic search not work quite well in some situations Please if anyone find bugs be kind and report them at the Issue Tracker! Thanks!DotNetNuke® Community Edition: 05.06.04: Major Highlights Fixed issue with upgrades on systems that had upgraded the Telerik library to 6.0.0 Fixed issue with Razor Host upgrade to 5.6.3 The logic for module administration checks contains incorrect logic in 1 place, opening the possibility of a user with edit permissions gaining access to functionality they should not have through a particularly crafted url Security FixesBrowsers support the ability to remember common strings such as usernames/addresses etc. Code was adde...Terminals: Version 2.0 - Beta 3 Release: Beta 3 Refresh Dont forget to backup your config files BEFORE upgrading! The team has finally put the nail into the official release date for version 2.0. As bugs are winding down on the 2.0 Roadmap we decided to push out another build - the first 2.0 Beta build. Please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Check the source code page on the site, th...iTuner - The iTunes Companion: iTuner 1.4.4322: Added German (unverified, apologies if incorrect) Properly source invariant resources with correct resIDs Replaced obsolete lyric providers with working providers Fix Pseudolater to correctly morph every third char Fix null reference in CatalogBaseNew ProjectsA Blog: This is a blog plus personal web page frameworkAccess 1-D Intersection: This is an Access VBA Module containing functions that allow make it easy to determine overlaps in 1-D intervals. For instance if table A contains a range of 0-7 and Table B contains a range of 5-10, the intersection is 5-7.AkismetPC: A C# implementation of the popular anti-spam plugin Akismet. There aren't many .NET versions of Akismet so I decided to write one and that can be used with .NET blog engines such as Subtext, etc.AlertMonkey: A multicast chat client that enables users to send html, images, sounds, and files to connected users. Provides specialized alert types such as lunch and happy hour, as well as channel support.Azzeton: azzetonBKWork: private project.Blue: Blue is a web application for italian baseball and softball umpires.Build Javascript Models from .Net Classes: Build JavaScript Data Models from .Net Classes automaticallycmpp: cmppCRM 2011 TreeView for Dependent Picklist: This utility will allow CRM Customizer to configure Dependent Picklist items which will be shown as TreeView control on CRM form.DirSign: DirSign is a console exe that evaluates or checks directory signature. DirSign is used to check if something in a directory tree has changed (a file date or a file size or a new or missing file). You can use DirSign in scenario where you need to check if something changed since last time but where you can't install a file system watcher.epictactics: Game for WP7Export SharePoint 2010 External List to Excel: Export SharePoint 2010 external list to Excel with custom ribbon plugin. Export current external list with selected view to office 97 - 2003 or office 2007 - 2010.Floridum: Project for a XML Database.GNU ISO8583: GISO (GNU ISO) is a tool that makes it easier to analyze ISO 8583 financial transactions and also provides a platform to create a host simulator, capable of receiving requests and sending back the responses. It’s a WinForms application and it’s developed using C#.G's Syndication Pocket: G's Syndication Pocket is simple RSS Aggregate application. This is suitable for .NET Compact Framework. I checked it on Sharp's W-ZERO3.Hatena Netfx Library: .NET Library for Hatena Services.inohigo: a programming language that was developed by inohiro.Internet Cache Examiner: Internet Cache Examiner allows Internet Explorer INDEX.DAT files to be read directly, allowing the extraction of more information than is displayed in Internet Explorer, and without being limited to viewing only the activity of the current user. It's developed in C#.Javascript to IQueryable: javascript to IQueryable is an implementation that allows to write a simple query in javascript and then execute it on the server with EntityFramework or a linq provider that implement IQueryable.kisd: Just my code, wanted to keep it safe.LUCA UI for Silverlight 4: LUCA UI is a collection of flexible layout controls for Silverlight 4. Basically, using these controls you can create the same type of user-definable UI that Visual Studio and Expression Blend have.Messenger Game - Starter Kit: Kom godt i gang med at lave spil til Messenger med dette komplette Starter Kit. Indeholder et komplet netværksspil lavet med Messenger Activity API og Silverlight.Music Keys: Music KeysMyNote: MyNoteOpen Source Data System: DataSystem is a file based database system that is thread safe. It is a dynamically generated database meaning developers can either structure it outside the application prior or development. PhotoDesktop: Create background images for your desktop using hundreds of your photos off your local computer. (coming soon - use flickr [or other RSS] feeds)SharePoint Backup Augmentation Cmdlets: The SharePoint Backup Augmentation Cmdlets (SharePointBAC) provide administrators with additional PowerShell cmdlets to complement and extend SharePoint 2010's native backup and restore capabilities. SharePointBAC makes it possible to groom backup sets, archive backups, and more.SharpClassifier: C "Classifier" is an AI software component that tries to classify instances from given evidence (if shiny then diamond). A famous example is classifying email spam, separating it from ham. SharpClassifier currently only contains a single classifier - A Bayesian Naive Classifier. Most Bayesian Naive Classifiers for C# you'll find out there only handles two classes (spam/ham), but this implementation supports any number of classses.Shell Sort Web service and Application: this is a webservice of Sorting methode. use Shell sort methode to sorthing a unsorted number, and it can give a boundary as you input this project is made by Information System students, Ma Chung University , Malang - East Java - Indonesia [url:www.Machung.ac.id] Anna Letizia & SetiawanEka Prayuda Barbiezztissa@gmail.com & setya_09@hotmail.comSistema UELS: adsfasdfSorting Number use Insertion Sort on Web Service: This program can simulate the insertion sort easily.TA_Sorted_App01: First implementation of TA_Sorted Algorithm ThinkDeeper MVC framework: ThinkDeeper MVC is a WPF MVC for .NET 3.5. Typing Game: The Nottingham Game Developer's first game.xBlog: xBlog is a project to build a simple and extensible Blog Engine based on xml and linqXNA DebugDrawer Using Spritebatch: This project serves to show how to draw lines and rectangles using XNA's Spritebatch. This project uses XNA 4.0 and C# programming languageYet another Scedule Planner: YASP - Yet another Scedule Planner

  Read the article

• DataMining / Analyzing responses to Multiple Choice Questions in a survey

  - by Shailesh Tainwala

  Hi, I have a set of training data consisting of 20 multiple choice questions (A/B/C/D) answered by a hundred respondents. The answers are purely categorical and cannot be scaled to numerical values. 50 of these respondents were selected for free product trial. The selection process is not known. What interesting knowledge can be mined from this information? The following is a list of what I have come up with so far- A study of percentages (Example - Percentage of people who answered B on Qs.5 and got selected for free product trial) Conditional probabilities (Example - What is the probability that a person will get selected for free product trial given that he answered B on Qs.5) Naive Bayesian classifier (This can be used to predict whether a person will be selected or not for a given set of values for any subset of questions). Can you think of any other interesting analysis or data-mining activities that can be performed? The usual suspects like correlation can be eliminated as the response is not quantifiable/scoreable. Is my approach correct?

  Read the article

• Java Spam Filter

  - by JackSparrow

  I'm trying to create a spam filter in Java using the Bayesian algorithm. I use a text file that contains email messages and split the tokens using regex, storing these values into a hashmap. My problem is, with regex, the email addresses are split so instead of: [email protected] regex causes the token to be: john smith example The same holds true for ip addresses, so for example, instead of: 192.55.34.322 regex splits the tokens to be: 192 55 34 322 So does anybody know of a way that I could read the email messages and store their contents as is?

  Read the article

• Static Evaluation Function for Checkers

  - by Kamikaze

  Hi all! I'm trying to write an evaluation function for a game of checkers that I'm developing but I can't find the right documentation. I've read several documents on the web witch describe different techniques for either writing one or letting the computer find it(using genetic algorithms or Bayesian learning) but they're too complicated for a novice like me. All documents pointed a reference to "Some studies in machine learning using the game of checkers" by A.L.Samuel but I couldn't get my hands on it yet :(. I've only read the follow up "Some studies in machine learning using the game of checkers -II" and found some good info there, but it doesn't explain what the eval parameters mean (I think I don't have the whole article). Thanks for your help!

  Read the article

• Detecting syllables in a word

  - by user50705

  I need to find a fairly efficient way to detect syllables in a word. E.g., invisible - in-vi-sib-le There are some syllabification rules that could be used: V CV VC CVC CCV CCCV CVCC *where V is a vowel and C is a consonant. e.g., pronunciation (5 Pro-nun-ci-a-tion; CV-CVC-CV-V-CVC) I've tried few methods, among which were using regex (which helps only if you want to count syllables) or hard coded rule definition (a brute force approach which proves to be very inefficient) and finally using a finite state automata (which did not result with anything useful). The purpose of my application is to create a dictionary of all syllables in a given language. This dictionary will later be used for spell checking applications (using Bayesian classifiers) and text to speech synthesis. I would appreciate if one could give me tips on an alternate way to solve this problem besides my previous approaches. I work in Java, but any tip in C/C++, C#, Python, Perl... would work for me.

  Read the article

• Beginner's resources/introductions to classification algorithms.

  - by Dirk

  Hi, everybody. I am entirely new to the topic of classification algorithms, and need a few good pointers about where to start some "serious reading". I am right now in the process of finding out, whether machine learning and automated classification algorithms could be a worthwhile thing to add to some application of mine. I already scanned through "How to Solve It: Modern heuristics" by Z. Michalewicz and D. Fogel (in particular, the chapters about linear classifiers using neuronal networks), and on the practical side, I am currently looking through the WEKA toolkit source code. My next (planned) step would be to dive into the realm of Bayesian classification algorithms. Unfortunately, I am lacking a serious theoretical foundation in this area (let alone, having used it in any way as of yet), so any hints at where to look next would be appreciated; in particular, a good introduction of available classification algorithms would be helpful. Being more a craftsman and less a theoretician, the more practical, the better... Hints, anyone?

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >