Search Results

Search found 12726 results on 510 pages for 'compatibility mode'.

Page 27/510 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

  - by keepitsimpleengineer

  After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

  Read the article

• 12.04 How to go back to command line only ubuntu

  - by Ne0

  I was attempting to install a command line only version of Ubuntu and followed the instructions here. I downloaded the alternate CD and went through the installation, but never got an "Install a command-line system." option. 12.04 is now up and running, though i don't need the desktop GUI. From what i have read i can set it back into text mode using grub, but what packages should i remove that i don't need any more?

  Read the article

• How can I export emacs documents in 13.04?

  - by Whippy

  When I try to export a document from org-mode in emacs, c-X, c-E now results in 'Can't find library org' whereas in 10.04 it opened the export dialog allowing me to produce html, pdf etc. from the source org file. Searching with Google, I found this bug for redhat which looks closely related. The trouble is I don't know how to get hold of the emacs-el package it talks about in ubuntu in order to try its workaround so I'm currently stuck.

  Read the article

• What to do when a device has no driver for Windows 7 but it has Vista, XP drivers

  - by Mehper C. Palavuzlar

  This has always been a bothersome matter for me. Some devices (printers, scanners, etc.) have drivers for older versions of Windows (Vista, XP, 2000, NT) but no driver for Windows 7. What are my chances to install such devices on Windows 7? Example case: I have a Sharp printer & scanner (Sharp AR-122E N) which I have used for my old Windows XP based PC. Now I want to install it on a Windows 7 x64 based PC. Windows 7 cannot load its driver. I used the original driver CD but when I run the setup.exe (which is included in AR122EN111.exe, 6713KB), it says Cannot install driver on this operating system. Supported operating systems are: Windows 2000, XP, Vista. I tried to install the driver using compatibility settings. I tried Windows Vista and Windows XP SP3, but to no avail. The setup gave the same error. I also googled for Windows 7 driver for "Sharp AR-122E N" but it only listed the original driver that I tried. The official site of Sharp does not even list the driver for this product. In the past, the compatibility setting workaround did work for some devices, but this time it failed. What else can I do to overcome this problem?

  Read the article

• Is there a way to hide the Primefaces fileUpload progress bar and buttons in advanced mode and auto mode?

  - by Joe Roberts

  Is there a way to hide the Primefaces fileUpload progress bar and buttons in advanced mode and auto mode? Here is the code that I am using: <p:fileUpload id="scriptUpload" widgetVar="importDevicesWidget" fileUploadListener="#{scriptUploadBean.handleFileUpload}" auto="true" label="Choose.." mode="advanced" update=":infoMessages" sizeLimit="8192" allowTypes="/(\.|\/)(txt)$/" onstart="clearInvalidFileMsg();$('#progress').show();" oncomplete="clearInvalidFileMsg();$('#progress').hide();importDevicesDialogWidget.hide()"/> The problem is that it makes no sense for the buttons that appear next to the progress bar for each file to be there as the mode is auto so the upload already started! Here is a screen shot:

  Read the article

• HAProxy not passing SSL traffic in TCP mode (unknown protocol)

  - by David

  Hi, I've got a HAProxy LB solution setup and working correctly. All HTTP traffic on port 80 is being passed through succesfully. I'm now trying to get SSL traffic to work (in TCP mode and on just one server for now) however I keep getting the following error when testing via openssl: 26396:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:588: However, when I try the same test (openssl s_client -connect) on the web servers IP address and hostname, everything seems to look OK. I can setup a hosts record locally and confirm that the browsers are picking up the SSL certificate succesfully for the domain. I guess this has led me to the conclusion that there is a problem at the HAProxy setup I have, so would really appreciate some advice here. frontend https-c-in bind 178.79.xxx.xxx:443 mode tcp default_backend c-https backend c-https balance source option ssl-hello-chk option httpclose server c-web-01 192.168.xxx.xxx:443 check inter 2000 rise 2 fall 5

  Read the article

• Optional parameters with PHP SoapClient class on wsdl mode

  - by Maraino

  With the SoapClient class on PHP5.x and working against a SOAP web service that has optional parameters in its methods, you won't have any problem if you use the non-wsdl mode. But, at least by default, with the wsdl mode, if you don't fill all the parameters you will get an error like: SOAP-ERROR: Encoding: object hasn't 'xxx' property Is there any way to avoid that error without working with the non-wsdl mode and without filling all the parameters?

  Read the article

• Debuging CUDA kernels called from .NET code in VS2008, emulation mode

  - by Danny Varod

  CUDA has an option to compile code in emulation mode, which is supported in the .rules file they provide. I have C# .NET 3.5 SP1 code that calls a native dll, using DllImport, the native dll is compiled via VS2008 using nvcc and its function is to transfer memory from and to CUDA and to invoke CUDA kernels. When the CUDA kernels are correct, everything runs fine, but when there is a bug, I can only step in to the code until the title of the kernels and see the parameters they receive. (I enabled debugging native code in the startup-project's debug options.) I have tried compiling with emulation mode, however I get the CUDA error "mixed device execution" when calling the CUDA memcopy host--device. I tried switching the alloc+dealloc+memcopy with their equivalent non-CUDA versions, but then the same error occurs when invoking the kernels. What did I do wrong in my attempt to using the debug-emulation mode? P.S. I tried this on Vista x64 SP1 + VS2008, with the same solution complied in both x86 and x64, neither worked in emulation mode, both worked in non-emulation mode.

  Read the article

• Unable to run openoffice in headless mode

  - by uswaretech

  I want to automoate some PPT - PDF conversions, so I want to run openoffice in headless mode for scripting. On my machine with X running I can start opemoffice in headless mode via soffice -accept="socket,port=8100;urp;" -headless This doesn't seem to work on a server with X not running. $ soffice -accept="socket,port=8100;urp;" -headless /usr/lib/openoffice/program/soffice.bin X11 error: Can't open display: Set DISPLAY environment variable, use -display option or check permissions of your X-Server (See "man X" resp. "man xhost" for details) $ The error doesnt seem to make sense as well, as the point of specifying -headless was so that I do not need X, while this command seems to look for X.

  Read the article

• Pre-built UI components for displaying SSRS Local Mode Parameters

  - by namenlos

  BACKGROUND Am writing a WinForm app that uses the SSRS Report Viewer control to render reports in local mode - there is no SSRS server involved at all I can successully create and execute reports in local mode What I want to do is add Parameters to the report THE PROBLEM When the Report Viewer control executes a report in local mode it does not provide any UI that allows the user to enter values for parameters defined in the report This is in contrast to to when the Report Viewer control is running a server report - parameters are shown. MY QUESTION Are there pre-built components or even sample code I can use that would provide a reasonble parameter user experience for this scenario (scenario = SSRS + Report Viewer Control + Local Mode)? Yes, I could write this UI code myself - what I am looking for is existing code to avoid having to implement this UI because I'd rather spend my time making the content of the report work well NOTES Switching to another reporting engine besides SSRS is not an option. Switching to server side reports is not an option.

  Read the article

• Configure IIS 7.0 to enable webservices in classic mode

  - by intermension

  What are the configuration file settings to enable webservices on IIS 7.0 in classic mode? The site has to be in a classic mode application pool because the Report Viewer controls crash when running in Integrated Mode. However in a classic mode application pool, webservices produce the following error message: The requested content appears to be script and will not be served by the static file handler. •If you want to serve this content as a static file, add an explicit MIME map EDIT - Additional Error Message Info: HTTP Error 404.17 - Not Found Module: StaticFileModule Notification: ExecuteRequestHandler Handler: StaticFile Error Code: 0x80070032 Note: This particular instance of the application will be running in a customers account on a shared hosting enviroment so access to IIS UI is not/will not be available. Specifically seeking configuration file adjustments.

  Read the article

• Windows 7 + Deep Freeze - I'm stuck in an endless reboot loop

  - by myermian

  I have the following setup: Windows 7 Ultimate Deep Freeze I "thawed" my machine last night and performed a Windows Update. The update is having issues (it gets stuck at 32%, fails, and restarts my machine). When it reboots it attempts it again, and again, and again, etc. (Endless loop). I looked online and found some solutions, but none of them seem to be working: When I run Safe Mode, Safe Mode w/ Network, or Safe Mode w/ Command Prompt it attempts to revert the Windows Update changes. However, the problem is with Deep Freeze on (and now in "Frozen" mode) the reverted changes don't stay, and I'm back into the loop of death. Oh, and side note: "Safe Mode w/ Command Prompt" does not actually take me to a command prompt window? Perhaps because it is attempting to complete the Windows Update changes first? I have tried to select the option to NOT restart when an windows error occurs, but it still does. I tried the remainder of all the other options in the F8 screen. The only other option left is to find my Windows 7 Media Disc (I can't find it right now) and use it to repair windows (because for some reason the repair option does not show up in the F8 screen). Is there a way to disable Deep Freeze from loading? When I selected "Safe Mode w/ Command Prompt" I noticed that it loads the DpFrz.sys file. I know that when I'm in the Windows Boot Manager if I press F10 instead of F8 (while highlighting Windows 7) it takes me to an "Edit Boot Options" screen: Edit Windows boot options for: Windows 7 Path: \Windows\system32\winload.exe Partition: 2 Hard Disk: 8e90e329 [ /NOEXECUTE=OPTIN (I CAN EDIT THIS LINE) ] Update: I found my Windows 7 Media Disk and it did not help out. The laptop had the "System Restore" as a partition on the HDD. I later received (in the mail) a Windows 7 Upgrade Disc from Sony to upgrade my system from Windows Vista to Windows 7 Ultimate. I placed the disc into the DVD drive and it does not come up as a "bootable" disc. I'm going to try to find an alternative disc to see if I can get into Command Prompt. Update 2: I got a Windows Repair disc and got into a command prompt window. I got into the registry and disabled Deep Freeze. Also: I renamed the Pending.xml file to Pending.old I cleared out the Windows Temp directory I still am stuck in the loop (though, it isn't an issue with DeepFreeze anymore because I can make changes to the hard drive and they persist). Not sure what to do at this point? Update 3: I ran the repair option and it couldn't repair, but it did point me to something. It says the error was due to a driver that was failing. I have a feeling it is my UPEK Fingerprint scanner.

  Read the article

• DOS/Command Prompt Power Mode

  - by King

  from where can i get a Bootable or Executable Power Mode DOS/Command Prompt.

  Read the article

• VM can’t connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have. My virtual network editor shows that my ethernet adapter(the one my host uses) is used for bridging. It is connected. I don't understand how I can get an IP address from DHCP server. I can't ping any of the DNS servers in generated /etc/resolv.conf which are the same as that of my host

  Read the article

• Intellij + GWT 2: Development Mode ignores changes to static content

  - by Kaffeine Coma

  The new Development Mode in GWT 2 is awesome, but unfortunately as launched from Intellij IDEA 9, it does not seem to notice changes made to static files such as html, css, etc. It immediately see changes in *.java files, but not the static ones. If I make a change in a static file I need to quite the Development Mode tool and re-launch it. This is painfully slow, and negates much of the point of using dev mode in the first place I assume this is some artifact resulting from the way the Intellij runner launches it- it creates an out/artifacts/project_war_exploded directory with the static content and class files. How can I get Intellij Dev Mode tool to follow changes made to the original static source files?

  Read the article

• IE9 Kiosk Mode scheduled task opens behind taskbar

  - by greg27

  I've set up a scheduled task in Windows 7 Pro to open up Internet Explorer 9 (x86 version) in kiosk mode. The scheduled task executes when a certain user logs in, and this user is logged in automatically when Windows starts. This is the command I'm using to start IE: "C:\Program Files (x86)\Internet Explorer\iexplore.exe" -k http://example.com So far so good - the computer boots up, the user gets logged in, and IE opens up in kiosk mode. The problem is that IE seems to open behind the taskbar - so the taskbar (start menu, pinned programs, etc.) appears at the bottom of the window, and the bottom of the IE window is visible through the taskbar (since the taskbar is translucent). Is there anything I can do, preferably without installing any third party programs (although I will go for that option if none other is available), to ensure that the IE9 kiosk window always opens in front of the taskbar?

  Read the article

• VM can't connect to outside in bridged mode

  - by Kamal

  I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

  Read the article

• Vim Stuck In Insert Mode

  - by Levi Hackwith

  I've been using Vim for several months now via my web host (they allow putty access). All of a sudden, the escape key has become unresponsive. I cannot exist insert or any other mode by simply hitting escape. I have to hit F1 which brings up the help in vim and kicks me into command mode. I'm most certain that my escape key on my keyboard is functioning fine since all of my windows shortcuts that use the escape key operate normally. I know this is a ridiculous question and I'm certain there's a lot more to look into regarding a solution. What I really need is a solid lead as to where to start looking. Things that might help: I'm using vim via putty I'm logging in using jailshell I'm not root

  Read the article

• Problems using xcode in debug mode with Core Plot

  - by Splash6

  I'm having a problem compiling an application which uses Core-Plot in debug mode. It works absolutely fine compiling in release mode, but when I compile in debug mode I get an error that the header file for Core-Plot can't be found. Any idea which of the many settings in x-cide might be causing this problem?

  Read the article

• ClickOnce in Release mode doesn't publish

  - by Kave

  Just doing some testing/prototyping with ClickOnce. Does anyone know why I can publish with CLickOnce when its set to 'debug' mode but not when its set to 'release' mode? I dont even get an error message for the latter. The output folder remains empty as nothing has happened. Once I switch to Debug mode and do the publishing everything is fine. Any idea? Thanks

  Read the article

• Wake network adapter from deep sleep mode

  - by BeatMe

  I recently buyed a new Mainboard (Asrock ALiveXFire) and got some trouble with the network adapter. After switching my Windows 7 x64 in energey saving mode and returning from it, my network adapter couldn't be found. After some googling I found out, that apparently my network adapter has been put in a deep sleep mode and didn't reactivate. Their solution was to switch the PC off, take out the RAM and the CMOS battery for some time. After that, the adapter should be powered on again, but that didn't happen for me. I waited several hours before turning my PC on again, but that didn't help. Formatting and reinstalling didn't help either. The network adapter is not found in the hardware manager and reinstalling the drivers didn't help. I have the newest BIOS installed on the mainboard. I literally don't know what to try next. I'm thinking of returning my board, but I would like to avoid the hassle.

  Read the article

• Quickly open Windows Mobility Center in Windows 8 "tablet" mode

  - by piyo

  I am using a Surface Pro (2013). I would like to know if there is a quick way to open the Windows Mobility Center desktop program. I like to use this program because it is easy to manipulate during the "tablet" (non-keyboard, no-mouse) mode. This program has multiple ways to be started, according to From How to Open and Use Mobility Center in Windows 7 and Windows 8: (Windows 8) Press Windows key + X and select Mobility Center Open the Control Panel and select "Windows Mobility Center" Open the Run dialog and type "mblctr.exe" and press Enter key. None of these are quick and easy when in "tablet" mode. I would ideally like to swipe from right screen edge into to open the Settings pop up and select one icon that opens the Mobility Center. Alternatively, another way I would like to have implemented would be to touch the Windows icon on the tablet screen outside of the viewing area and touch an "app" to launch the Mobility Center. Alternatively, it would be nice to have a Live Tile App that duplicates this functionality.

  Read the article

• Custom background for UINavigationBar in landcape mode

  - by lostInTransit

  Hi I am adding a custom background for my UINavigationBar. It works fine as long as the phone is in portrait mode. As soon as I switch to landscape mode, half the bar appears blue (the default navbar color) and half of it has my image How can I stretch the image for landscape mode and make it small again for portrait mode? Thanks Solution Incase anyone is looking for an answer to how to add an image to navigation bar - here goes UIImageView *imgView = [[UIImageView alloc] initWithFrame:CGRectMake(0.0, 0.0, 480.0, 44.0)]; [imgView setImage:[UIImage imageWithContentsOfFile:[[NSBundle mainBundle] pathForResource:@"navbar_landscape" ofType:@"png"]]]; [navigationController.navigationBar addSubview:imgView]; [imgView release];

  Read the article

• IKE Phase 1 Aggressive Mode exchange does not complete

  - by Isaac Sutherland

  I've configured a 3G IP Gateway of mine to connect using IKE Phase 1 Aggressive Mode with PSK to my openswan installation running on Ubuntu server 12.04. I've configured openswan as follows: /etc/ipsec.conf: version 2.0 config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn net-to-net authby=secret left=192.168.0.11 [email protected] leftsubnet=10.1.0.0/16 leftsourceip=10.1.0.1 right=%any [email protected] rightsubnet=192.168.127.0/24 rightsourceip=192.168.127.254 aggrmode=yes ike=aes128-md5;modp1536 auto=add /etc/ipsec.secrets: @left.paxcoda.com @right.paxcoda.com: PSK "testpassword" Note that both left and right are NAT'd, with dynamic public IP's. My left ISP gives my router a public IP, but my right ISP gives me a shared dynamic public IP and dynamic private IP. I have dynamic dns for the public ip on the left side. Here is what I see when I sniff the ISAKMP protocol: 21:17:31.228715 IP (tos 0x0, ttl 235, id 43639, offset 0, flags [none], proto UDP (17), length 437) 74.198.87.93.49604 > 192.168.0.11.isakmp: [udp sum ok] isakmp 1.0 msgid 00000000 cookie da31a7896e2a1958->0000000000000000: phase 1 I agg: (sa: doi=ipsec situation=identity (p: #1 protoid=isakmp transform=1 (t: #1 id=ike (type=enc value=aes)(type=keylen value=0080)(type=hash value=md5)(type=auth value=preshared)(type=group desc value=modp1536)(type=lifetype value=sec)(type=lifeduration len=4 value=00015180)))) (ke: key len=192) (nonce: n len=16 data=(da31a7896e2a19582b33...0000001462b01880674b3739630ca7558cec8a89)) (id: idtype=FQDN protoid=0 port=0 len=17 right.paxcoda.com) (vid: len=16) (vid: len=16) (vid: len=16) (vid: len=16) 21:17:31.236720 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 456) 192.168.0.11.isakmp > 74.198.87.93.49604: [bad udp cksum 0x649c -> 0xcd2f!] isakmp 1.0 msgid 00000000 cookie da31a7896e2a1958->5b9776d4ea8b61b7: phase 1 R agg: (sa: doi=ipsec situation=identity (p: #1 protoid=isakmp transform=1 (t: #1 id=ike (type=enc value=aes)(type=keylen value=0080)(type=hash value=md5)(type=auth value=preshared)(type=group desc value=modp1536)(type=lifetype value=sec)(type=lifeduration len=4 value=00015180)))) (ke: key len=192) (nonce: n len=16 data=(32ccefcb793afb368975...000000144a131c81070358455c5728f20e95452f)) (id: idtype=FQDN protoid=0 port=0 len=16 left.paxcoda.com) (hash: len=16) (vid: len=16) (pay20) (pay20) (vid: len=16) However, my 3G Gateway (on the right) doesn't respond, and I don't know why. I think left's response is indeed getting through to my gateway, because in another question, I was trying to set up a similar scenario with Main Mode IKE, and in that case it looks as though at least one of the three 2-way main mode exchanges succeeded. What other explanation for the failure is there? (The 3G Gateway I'm using on the right is a Moxa G3150, by the way.)

  Read the article

• XPath does not pass brower compatibility checks in InfoPath 2007

  - by drivendevelopment

  Why do the targetField attributes below fail the browser compatibility checker in InfoPath 2007. Is there another way to write the statement so that it will work on Browser Enabled forms? <xsf:ruleSets> <xsf:ruleSet name="ruleSet_1"> <xsf:rule caption="Rule 1" isEnabled="yes"> <xsf:assignmentAction targetField="my:group1/my:group2[1]/my:field3" expression="my:field1"></xsf:assignmentAction> </xsf:rule> <xsf:rule caption="Rule 2" isEnabled="yes"> <xsf:assignmentAction targetField="my:group1/my:group2[2]/my:field3" expression="my:field2"></xsf:assignmentAction> </xsf:rule> </xsf:ruleSet> </xsf:ruleSets>

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >