Search Results

Search found 2442 results on 98 pages for 'dan ryan'.

Page 27/98 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• why is iometer performance slower after first run?

  - by Dan

  I'm doing some benchmarking with IOMeter, and I'm seeing a consistent and susbtantial drop-off in performance after running the first test. These drop-offs are about the same on the three systems I've tested on, which makes me think it's a configuration setting, or just a fact of life about using IOMeter. For example, one system (local RAID 10) went from 388 I/Os per second the first run, to about 211 I/Os per second on every run after that. Everything else about the test was identical, and I also bounced the machine in between runs. So, is this expected behavior, or am I missing something?

  Read the article

• Why are my httpd mpm_prefork processes being reaped so quickly?

  - by Dan Pritts

  We've got a system running RHEL6, x64. We are using a local installation of apache 2.2.22 from source. we serve primarily: mod_perl applications (with a local installation of perl 5.16.0) tomcat applications proxied with mod_jk Here is some context; the main question is below. All of this talks to an Oracle backend. We are having issues with Oracle becoming unresponsive. We think this is because we're hitting the maximum process limit in oracle. We've upped the process limit, but now we are hitting memory pressure on the oracle server. We have tons of oracle sessions sitting idle. I can trace a bunch of them back to the httpd processes. We have mod_perl's Apache::DBI start up a new connection to the database with each httpd child that's spawned. We are concerned that these are not always getting closed out properly when the httpd's exit...and the httpd's are exiting very frequently. I know that it would be good to modify the mod_perl applications to use some better form of db connection pooling; we plan to pursue that but would like to solve our immediate problem sooner. So here's the main question. We are using the prefork MPM. The apache child processes are lasting at most a few minutes. Log analysis shows that each one is serving fewer than 50 clients before exiting; the last request each child serves is OPTIONS * HTTP/1.0 on some sort of internal connection; I'm under the impression that this is a "ping" from the master process. I've adjusted the MPM config as follows. I didn't want to raise MinSpareServers too high, because, after all, i'm trying to minimize the number of sessions to oracle. MinSpareServers 5 MaxSpareServers 30 MaxClients 150 MaxRequestsPerChild 10000 Right now we're serving 250-300 requests per minute. We've got 21 httpd's running, the eldest (other than the master, owned by root) being 3 minutes old. This rate of reaping of the apache children really seems excessive. What could be causing it? Apache was built with: $ ./configure --prefix=/opt/apache --with-ssl=/usr/lib --enable-expires --enable-ext-filter --enable-info --enable-mime-magic --enable-rewrite --enable-so --enable-speling --enable-ssl --enable-usertrack --enable-proxy --enable-headers --enable-log-forensic Apache config info: % /opt/apache/bin/httpd -V Server version: Apache/2.2.22 (Unix) Server built: Jul 23 2012 22:30:13 Server's Module Magic Number: 20051115:30 Server loaded: APR 1.4.5, APR-Util 1.4.1 Compiled using: APR 1.4.5, APR-Util 1.4.1 Architecture: 64-bit Server MPM: Prefork threaded: no forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="/opt/apache" -D SUEXEC_BIN="/opt/apache/bin/suexec" -D DEFAULT_PIDLOG="logs/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="logs/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="conf/mime.types" -D SERVER_CONFIG_FILE="conf/httpd.conf" modules are compiled into apache rather than shared libs: % /opt/apache/bin/httpd -l Compiled in modules: core.c mod_authn_file.c mod_authn_default.c mod_authz_host.c mod_authz_groupfile.c mod_authz_user.c mod_authz_default.c mod_auth_basic.c mod_ext_filter.c mod_include.c mod_filter.c mod_log_config.c mod_log_forensic.c mod_env.c mod_mime_magic.c mod_expires.c mod_headers.c mod_usertrack.c mod_setenvif.c mod_version.c mod_proxy.c mod_proxy_connect.c mod_proxy_ftp.c mod_proxy_http.c mod_proxy_scgi.c mod_proxy_ajp.c mod_proxy_balancer.c mod_ssl.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_info.c mod_cgi.c mod_negotiation.c mod_dir.c mod_actions.c mod_speling.c mod_userdir.c mod_alias.c mod_rewrite.c mod_so.c One final note - the red hat httpd, apr, and perl packages are all installed, but ldd shows that none of those libraries are linked with the running httpd.

  Read the article

• Exchange 2007 Email Address Policies

  - by Ryan Migita

  We have recently upgraded to Exchange 2007 (from 2003) and have noticed the change from recipient policies to email address policies. We have two separate domains (let's call them domaina.com and domainb.com) we receive email for, have email address policies and both email address policies are not applied. In our Exchange 2003 environment, domaina.com was the default email address when we created new mailboxes and due to the migration, domainb is the default (and its email address policy is a higher priority). Now, when we create a new mailbox (or edit existing ones), the primary email address becomes domainb.com. Now the question is, is this as simple as putting the email address policies in the correct order? Do I have to apply both policies? What effect will the above changes make to existing mailboxes? Since we do not have any conditions set on the policies, I assume prior to making these changes, I should force all domainb mailboxes to not automatically update email address based on policy? Thanks in advance!

  Read the article

• Using Bazaar (BZR) on AFP or SMB mounted server not wroking

  - by Dan Berlyoung

  Has anyone been able to get BZR working on a mounted AFT or SMB mounted share? I've tried both (The AFP volume is actually coming off an Xserver.) and neither work. I have BZR 2.0.0 and am running it on a Mac with 10.5. I keep getting an error like this bzr: ERROR: Could not acquire lock "/Volumes/joeserver/Documents/bzr/remote_test/.bzr/checkout/dirstate": [Errno 45] Operation not supported I googled around a bit but only found a fairly stale (2007) bug report on launchad.com (Bug #313625 to be specific.) Any ideas?

  Read the article

• Why does waking a PC up with a timer act differently than with the power button?

  - by Dan Rasmussen

  I have a Windows 7 machine set up as a server. It has no monitor and is only accessed through remote desktop. I set up two scheduled tasks, one to put the computer to sleep at night and another to wake it up in the morning. When it's woken up from sleep via a timer, it stays awake for only a couple minutes before going back to sleep. When woken up by pushing the power button, however, it stays awake all the way until the sleep timer. Why does my PC behave differently in these two scenarios? I have set the PC not to prompt for a user's password on wake, since I worried that the login screen might follow different power rules. I tried SmartPower Configuration but had the same problems. I can provide more details if questions are asked in the comments, but I'm not sure what's relevant.

  Read the article

• Why won't my Western Digital My Book Home 500GB drive mount on my Macbook Pro via Firewire?

  - by Ryan O

  I can connect the drive via USB and it mounts correctly. However, when I connect via FireWire, the drive powers down. The drive realizes that it is plugged in. When I plug in via FireWire, the lights on the front of the drive flash the same as when it it mounting via USB, but then the drive powers down. I've upgraded the firmware on the drive, but it still won't mount via FireWire.

  Read the article

• Ubuntu login takes 15 seconds, "I/O error dev fd0 sector 0"

  - by Dan

  After upgrading to Ubuntu 10.04, when I first login it takes 10+ seconds where it just sits at the gdm backgroup before taking me to gnome. By switching to a terminal window during this 10 seconds I saw the error message "I/O error /dev/fd0 sector 0" being outputted. I assume this has to do with the floppy drive... but I don't even have a floppy drive! How do I disable this device and make this error message go away (and hopefully fix the long wait)? Thanks.

  Read the article

• Is there a command line two-factor authentication verification code generator?

  - by dan

  I manage a server with two-factor authentication. I have to use the Google Authenticator iPhone app to get the 6-digit verification code to enter after entering the normal server password. The setup is described here: http://www.mnxsolutions.com/security/two-factor-ssh-with-google-authenticator.html I would like a way to get the verification code using just my laptop and not from my iphone. There must be a way to seed a command line app that generates these verification codes and gives you the code for the current 30-second window. Is there a program that can do this?

  Read the article

• Can't connect to EC2 instance in VPC (Amazon AWS)

  - by Ryan Lynch

  I've taken the following steps: Created a VPC (with a single public subnet) Added an EC2 instance to the VPC Allocated an elastic IP Associated the elastic IP with the instance Created a security group and assigned it to the instance Modified the security rules to allow inbound ICMP echo and TCP on port 22 I've done all this and I still can't ping or ssh into the instance. If I follow the same steps minus the VPC bits I am able to set this up without issue. What step am I missing?

  Read the article

• Is there a way to execute a program on power events?

  - by Ryan Emerle

  I'm basically looking for a way to execute an application when my laptop transitions to battery power and, similarly, when it returns to AC. Is there a built-in hook in Windows or a third-party application that will allow me to respond to such events?

  Read the article

• How to get back to an active minibuffer prompt in emacs without the mouse

  - by Ryan Thompson

  In emacs, sometimes I will be in the middle of finding a file or switching buffers or doing something in the minibuffer, and I will click somewhere else for some reason. When I go back, the only way to make the minibuffer prompt active again is to click inside the minibuffer, which is annoying because it is a thin area. Is there any way to switch back to an active minibuffer prompt without using the mouse?

  Read the article

• SSH works in putty but not terminal

  - by Ryan Naddy

  When I try to ssh this in a terminal: ssh [email protected] I get the following error: Connection closed by 69.163.227.82 When I use putty, I am able to connect to the server. Why is this happening, and how can I get this to work in a terminal? ssh -v [email protected] OpenSSH_6.0p1 (CentrifyDC build 5.1.0-472) (CentrifyDC build 5.1.0-472), OpenSSL 0.9.8w 23 Apr 2012 debug1: Reading configuration data /etc/centrifydc/ssh/ssh_config debug1: /etc/centrifydc/ssh/ssh_config line 52: Applying options for * debug1: Connecting to sub.domain.com [69.163.227.82] port 22. debug1: Connection established. debug1: identity file /home/ryannaddy/.ssh/id_rsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_rsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.0 debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP Connection closed by 69.163.227.82

  Read the article

• Create netbook recovery image without DVD burner (virtual burner?)

  - by Dan

  I have a new Acer Aspire One which is asking to create a recovery DVD. It doesn't have a built in burner, and I don't have a USB burner. However I do have a large USB hard drive. Is there some way to get the recovery software to "burn" an image file instead of a real DVD? I know you can download a Linux recovery image, but the netbook comes with XP. I plan to install Linux on it but I'd like an XP recovery image just in case.

  Read the article

• Set up DPM to use hardware VSS Provider with EMC Clariion SAN

  - by Ryan

  We recently purchased an EMC Clariion AX4 SAN and we're using it to provide storage for our Hyper-V virtual machines. I've already got the servers registered with it and configured the failover cluster CSV's, etc. I'm wanting to figure out what I have to do to set up the VSS Provider for the SAN, so that Microsoft Data Protection Manager can use it to backup the virtual machines. I'm new when it comes to Clariion SAN's, so I have no idea how to set up the VSS provider. I downloaded something from Powerlink that was labeled VSS Provider and installed it on one of the machines connected to the SAN. It had something to do with a Solutions Enabler (I don't know what that is), but it doesn't really seem like it did anything. I read something that suggested I'd need to have Navisphere Manager to use the VSS Provider on the AX4, but we didn't purchase that - we're just using Navisphere Express. Can anyone help me figure out how to get the VSS Provider up and running?

  Read the article

• Location directive in nginx configuration

  - by ryan

  I have an nginx server setup to act as a fileserver. I want to set the expires directive on images. This is how a part of my config file looks like. http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; location ~* \.(ico|jpg|jpeg|png)$ { expires 1y; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } I get the following error when I reload config - "Location directive not allowed here". Can someone tell me what the right syntax for this is? Thanks in advance. EDIT : Found the answer myself. Added it in a comment. Closing this.

  Read the article

• How to force-restart a PC with vPro technology?

  - by Dan Nissenbaum

  I would like to know how to force-restart a PC that has crashed/hung and become completely non-responsive, using 2nd-generation vPro technology. Assume there is a second, fully responsive PC on the same LAN that can be accessed remotely to assist. Specifically, I am considering purchasing a PC with an i7-2860QM CPU, which is vPro-enabled (according to Intel). Here are two links that indicate it should be possible to force-restart a hung system with a 2nd-generation vPro-enabled CPU: Seconds 24-39 of What Is Intel vPro™ Technology? Page 17 (21 of the PDF) of Intel® vPro™ Technology: Reference Guide However, after extensive research, I cannot find a straightforward and trustworthy source of confirmation that this will actually work as I describe, or any documentation about how to set it up. I would appreciate both a reliable confirmation, and a source of documentation. This question is a follow-up to: Wake-on-LAN (WOL) fails after computer crashes (Windows 7 64-bit).

  Read the article

• Static route works on one computer, not the other

  - by Dan

  I have been struggling with this for a couple days now, maybe I just need some people with a fresh perspective to figure out what the issue is. Basically I have a bunch of computers that are being routed through a specific gateway in order to access a web page that is hosted internally on a separate subnet. I set up static routes on all of the computers, and they all work... except one. Here's what a route print -4 looks like for a working computer (Windows 7): =========================================================================== Interface List 14...xx xx xx xx xx xx ......Broadcom 802.11n Network Adapter 11...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 17...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.94 20 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.94 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.94 276 10.xxx.xxx.94 255.255.255.255 On-link 10.xxx.xxx.94 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.94 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.94 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.94 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== And here's a route print -4 from the station that doesn't work (also Windows 7): =========================================================================== Interface List 10...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.132 276 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.132 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.132 276 10.xxx.xxx.132 255.255.255.255 On-link 10.xxx.xxx.132 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.132 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.132 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.132 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== Both of these stations are running Windows 7. So essentially what I am trying to do here is route all traffic to the 10.zzz.zzz.0 subnet through the 10.xxx.xxx.147 gateway. Everything else should go through the 10.xxx.xxx.230 gateway. This is the intended behavior, and again it is working everywhere but that one station. I noticed that the Active Route metric costs differ between the two stations, but I am new to the routing table and I am not sure how that is impacting the behavior. I hope I have been able to explain the situation clearly. Any help would be much appreciated. I can provide any additional information if needed!

  Read the article

• Recommend a free/cheap CRM system [closed]

  - by Dan Hedley

  I am part of a 4 person volunteer team who manage a small housing development in London. We need a low-cost/no-cost contact management and issue tracking system. Specifically, it needs to be: -Web-based, or easily shared between 4 people working out of their homes -Easy to backup and restore -Decently secure Does anyone have any recommendations? I am reasonably technically literate, so a PHP-based solution running on a cheap hosting package would definitely be a viable option. Many thanks.

  Read the article

• Can I find the session ID for a user logged on to another machine?

  - by Dan Tao

  I want to open an application on another computer on the same network via the command line. The scenario here is that the user is in a room surrounded by about 20 computers and wants to be able to launch the same app on every computer without walking from screen to screen opening it up on each individual machine. I've discovered that I can get the basic functionality for this using PsExec as follows: psexec \\[computer] -u [username] -p [password] -d -i [SessionID] [program] For computer, username, password, and program, I'm good. Does anyone know of a way I can figure out which SessionID is assigned to a particular user logged on to a particular machine on the network? Alternately, is there a better way to go about what I'm trying to accomplish?

  Read the article

• Apache NameVirtualHost on port 443 ignores ServerAlias

  - by Ryan

  I've got a name-based virtual host setup on port 443 such that requests on host 'apple.fruitdomain' are proxied to the apple-app and requests on host 'orange.fruitdomain' are proxied to orange-app. This is working, but I'd like to add a ServerAlias for each such that requests on host 'apple' are proxied to apple-app and requests on host 'orange' are proxied to the orange-app. If I simply add a ServerAlias directive to the virtual host it doesn't work. ssl.conf below: Listen 443 NameVirtualHost *:443 <VirtualHost *:443> ServerName apple.fruitdomain ServerAlias apple SSLProxyEngine on ProxyPass /apple-app https://localhost:8181/apple-app ProxyPassReverse /apple-app https://localhost:8181/apple-app ... </VirtualHost> <VirtualHost *:443> ServerName orange.fruitdomain ServerAlias orange SSLProxyEngine on ProxyPass /orange-app https://localhost:8181/orange-app ProxyPassReverse /orange-app https://localhost:8181/orange-app ... </VirtualHost> Interestingly if I do a similar setup but with port 80 then the ServerAlias works...

  Read the article

• Recommended Setup

  - by Chris Ryan

  I have been running into issue with my MSSQL Database setup with speed. Here is my scenario. About 100M Rows Average: 1k Updates Per Second Hard Drives: RAID 10 SSD MDF --Active Time: 0 Log Drives: 1 SSD LDF - Simple Recovery --Active Time 99.9 --Queue: 8 I do not need a back up of the log so it is set to simple recovery but my bottleneck is still at my log. I get high WAITLOG times and thus it can not update any faster. I can't do bulk updates/transactions and each update needs to be one at a time. Is my only option to increase write performance of the log drives, add a RAID drives? Any suggestions on increasing the performance?

  Read the article

• Internal Website links only working for some users

  - by Ryan

  We are having a very hard time trying to figure out this problem or the root cause. Our website www. countrymusicislove .com is only correctly displaying the homepage for some users. Anytime they click on a post, about me, etc, a 404 error page is displayed. Everything worked fine before we moved over to a new hosting company 2 weeks ago. I am looking for any ideas and even willing to pay someone to troubleshoot and fix this issue as no one seems to have an answer. The entire website is done in the latest version of wordpress. The old website address for the website is http://siteground243.com/~countr10/ And the domain name was registered through google for enom.com Everything is now going through Arvixe.com On my work computer, I am able to get the 404 error to appear on other pages by turning on friendly error messages. When I turn off friendly error messages, everything seems to work. I have tried this several times and it doesn't seem like a coincidence.

  Read the article

• how can i import acm.program in eclipse ?

  - by ryan

  i watched the Stanford online video lecture about java programming which imported acm.program every class ,but when i type it in ,it became an error .how should i deal with it?

  Read the article

• Windows 7 Locks Up or Blue Screens after installing additional hard drive

  - by Ryan

  I've had my home theater pc for over a year now and it's been running with no problems what so ever. I got myself a new Seagate 2 TB hard drive for the holidays and ever since installing it the pc now randomly locks up or blue screens either upon putting it to sleep or waking it from sleep. The only thing I've tried so far is updating the firmware on the hard drive. The hard drive in question is this one (http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4846365). I do have my minidump file saved off on my home theater pc however right now I'm at work and don't have access to it. Please help! Thank you!

  Read the article

• How to add a web folder via command line (Windows)

  - by Ryan

  I am trying to add a web folder via command line in windows. At first I though I should use the "net use" command, but when I tried I kept getting System error 67: C:net use * http://dev.subdomain.domain.tdl/dav/ the user name for 'dev.subdomain.domain.tdl': correctusername the password for dev.subdomain.domain.tdl: System error 67 has occurred. The network name cannot be found. The url I used works in a browser. It's an Apache dav on basic auth LDAP authentication method being used. Here's the thing... I CAN create a web folder when I use the "Add a network place" wizard. When I do net use, I don't see it listed in the prompt that follows. What utility do I need to use to mount a web folder in command line?

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >