Search Results

Search found 18363 results on 735 pages for 'external ip'.

Page 27/735 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • Access Home Network Server via External Address

    - by Dominic Barnes
    For the last few months, I've been using a server on my home network for basic backups and hosting some small websites. Up until this past week, I've been using Comcast (cable) as an ISP and now that I've moved into an apartment, I'm using AT&T. (DSL) I've set up dynamic DNS and I can verify it works externally. However, I can't seem to access the public address from within the local network. Is there something DSL does differently from Cable that makes this frustration possible?

    Read the article

  • Network attached external harddrive from another computer.

    - by Paul Knopf
    I have a server that is setup in raid. It is on the same network as my main computer. I would like to have some of the memory on my server to act as a network attached drive on my main computer. Basically, I want it to be a new data drive (similar two C:\, but 2nd drives are mostly E:). That way, I can reformat my main computer without loosing any important data. And the data that is saved (on server E:\ drive) is secured via raid mirroring.

    Read the article

  • My EliteBook is not auto picking 1080p for external monitor, poor display on forcing

    - by Griever
    I'm connecting my Samsung LED S22A300B to my HP EliteBook 6930p through VGA out. Laptop has Intel 4500MHD video card. I have latest drivers installed for both card and monitor. Only 800x600 and 1024x768 are shown. A lot of other people get this problem when they use it with docking station as discussed here. But I am not using any docking station. The monitor works great with my desktop though. As advised on the aforementioned page, one of the things I tried was to force the resolution using Intel's "custom resolution" feature. I installed PowerStrip on my desktop and copied advanced timing values(front/back porch,sync width, etc.) from there and then used the same values while defining a custom resolution in my laptop's Intel graphics utility. As a result, I got the 1080p resolution but the display is poor. Text has some weird colored shadow and sometimes on images too. What should I do?

    Read the article

  • 59 vs 60 hertz on external display via DisplayPort

    - by Shiki
    Don't know if this is a really specific question or you'll help me out. Please do. I just bought a DeLock DisplayPort cable for my Lenovo T500. Tried to use it with the in-built Intel MHD4500, no use. With the ATI HD3650 (you can switch between the two vga on this machine) I get a normal picture, but only on 59hz. On 60 I get a smaller desktop size (strange). Any idea what can cause this? Will I have any problem if I use the 59hz? (Was using the display with a VGA cable but I get a blurry picture with that (dont matter what device I attach, VGA is like this on this display) and thats why I wanted to change.)

    Read the article

  • Powershell and long-running external tools?

    - by leeand00
    I'm trying to compact a MS-Access database using JetComp.exe using a powershell script. Here is the operative lines: # 4. Run JetComp LogWrite("Begin: Running JetComp") .\JETCOMP.EXE -src: $srcDB -dest: $dstDB | Out-Null #Run this command and wait for it to finish... IfErrorExit("Error Compacting Database") LogWrite("End: Running JetComp") The JETCOMP.EXE program seems to complete long before it is actually finished and the $dstDB ends up being smaller than the compact should even make it. Initially ($srcDB) it's about 1.8 GB and by the time the command finishes it's about 300,000 kb (about 0.29 gb) that's a pretty long way off from 1.8 gb which when compacted manually ends up being about 1.6 gb. Is there some sort of timeout I don't know about in powershell scripts? P.S. I know that when running JETCOMP.EXE manually, that the system often detects it as "not responding" even though it's actually getting the job done, and waiting long enough will allow it to complete.

    Read the article

  • External Hardrive Not Reconized on Windows 7 at all

    - by Bella
    I Have a NextStar 2/5" from Vantec and its an 80G HD. I have used it many times on windows xp and it works fine. We just recently upgraded to windows 7 home premium and when I plug it in it beeps many times. I've tried all the USB plugs in my computer and its not those plugs. Haven't tried eSata because it uses a weird cable to plug into. People told me that when it beeps everything is corrupted, but works fine on xp. I tried installing the drivers online from their website and when I try it asks me to put in a cd which makes no sense because they are online drivers. When I go into device manager nothing comes up, it just acts like the HD is invisible. The beeping will stop eventually as it is plugged in, but with no result.

    Read the article

  • Homework with allocate subnet IP address

    - by Don Lun
    I'm having difficulty solving a subnet allocation homework problem. Assume that a university has an address block 128.205.224.0/19. It has to allocate addresses for 2 departments' networks, each of size 1800, and for 4 offices, of sizes 550, 600, 650, and 750 nodes respectively. Assuming that the university network allocates addresses sequentially from the beginning of the allocated allocated address space, what are the prefix allocations for these subnetworks? I first thought in this way: There should be 6 subnets in the network. So I need 3 bits for the subnets. So 3 + 19 = 22 bits should be the network bits. Then there are only 10 bits left. 2^10 = 1024 < 1800, so this cannot work. Could you guys give me a hint or some thoughts for solving this problem?

    Read the article

  • Ping to IP address returned Destination Unreachable for a different IP address... huh?

    - by Hafthor
    This was totally an isolated incident, but I performed this command: ping 192.168.1.134 and got this result [image]: Pinging 192.168.1.134 with 32 bytes of data: Reply from 192.168.1.133: Destination host unreachable. Reply from 192.168.1.134: bytes=32 time=75ms TTL=128 Reply from 192.168.1.134: bytes=32 time=83ms TTL=128 Reply from 192.168.1.134: bytes=32 time=96ms TTL=128 note the .133 in the first 'unreachable' reply. I guess I don't understand how this is possible - even given a totally crazy coincidence.

    Read the article

  • Set Display Refresh Rate in OSX w/o External Utilities

    - by codedonut
    I have an iMac and an LG Flatron connected as a secondary monitor. The recommended resolution for the flatron is 1680x1050 @ 65.290 Hz (horiz), 59.954 Hz (vert). For some reason, OSX is choosing a slightly different set of scan rates and this is currently my best guess of why the monitor goes into power saving mode when connected to the iMac (but works fine on a PC). Now, I resolved this by installing switchResX and fudging the scan rates according to the specs in the manual. But how does one change these rates w/o 3rd party tools? Which config files need editing? Thanks

    Read the article

  • How to enable an external USD harddrive with ubuntu

    - by LarsOn
    Hello I'm trying to install a new LaCie Hard Disk design by Neil Poulton 1TB USB 2.0 GParted reports /dev/sda1 (with exclamation mark and key sign) ntfs 1 KiB unallocated 320 MiB /dev/sda2 hfs+ 2.84 MiB unallocated 931.2 GiB When trying to create a partition with Disk Utility it says Daemon is inhibited It seems I can't create the partition that way. Can you recommend how I can proceed? Thank you

    Read the article

  • External USB HD with -optional- mains?

    - by Stephen
    Hi, I'm Christmas-present-buying, and I'd appreciate recommendations for a USB HD with an optional mains power input. I've hunted, but can't find all the information I want (partially due to sketchy product specifications). Background: This is for a digital TV which I do not own, and so I'd like to get it correct first time. The TV has a USB port to allow recording straight to disk, but the manuals don't say how much power can be drawn through the USB port. The manual's instructions state, possibly generically, to plug the drive in before connecting to the TV. Ideally I'd like a small (2.5"?) drive which can draw power over USB, with an mains power input if it turns out the USB port on the TV doesn't offer enough juice. The ideal is to use one cable, two max. A powered USB hub would introduce too much clutter. I've spotted that the LaCie Petit drives have what appears to be an additional power input, but I'm not even sure from the specs what that is. And the device doesn't ship with a mains adapter. Suggestions?

    Read the article

  • Using an ATA-100 Hard Drive with a Thermaltake BlacX External Hard Drive Dock

    - by Joe
    Is it possible for a Thermaltake BlacX HDD Dock to connect to and recognize an ATA-100 Hard Drive? I know that the specifications for the BlacX say that it only supports SATA & SATAII, but I was hoping for one of three things: 1) for it to still work even though it isn't supported 2) for there to be some sort of workaround to make this possible 3) for there to be another part of some sort that I could purchase to make this work

    Read the article

  • Tips and Suggestions IP Address Re-Addressing?

    - by RSXAdmin
    Hello serverfault Universe, My ever evolving and expanding local area network is currently using a class-C address. My network consists of multiple subnets depending on site/location. 192.168.1.x is site HQ 192.168.5.x is secondary site 192.168.10.x is so on and so forth. Long story short - I have inherited this network design from the previous admin who has left the company which started off with a dozen people and now has just over 300 full time/part time employees. We do not yet have client VPN access; but we do have site to site VPN setup. My question is, in preparation for outside client access to my network via Cisco ASA, I would like to re-address the HQ site because I understand a 192.168.1.x or 192.168.0.x are not very good choices for a company subnet - it may conflict with a home user's LAN when connecting to my LAN, I believe? Through your experience, does anyone out there have any suggestions and tips on how I can proceed with re-addressing my subnets. If I designed this network I would have gone with a 10.0.0.0 (mask 255.255.255.0) so I am leaning towards changing it to fit. Thank you.

    Read the article

  • How to Enable an External USB Hard Drive with Ubuntu

    - by LarsOn
    I'm trying to install a new LaCie Hard Disk design by Neil Poulton 1TB USB 2.0. GParted reports /dev/sda1 (with exclamation mark and key sign) ntfs 1 KiB unallocated 320 MiB /dev/sda2 hfs+ 2.84 MiB unallocated 931.2 GiB When trying to create a partition with Disk Utility it says Daemon is inhibited It seems I can't create the partition that way. Can you recommend how I can proceed? Thank you

    Read the article

  • mac external-hard-disk "software update"

    - by Pietro
    When I make a software update, the files are downloaded on my MacBook's internal hard disk. How can I set a different hard disk as default? I suppose the files related to the software update are compressed packages that have to be saved, opened and decompressed. I would like to use the internal HD just to update MacOS, without storing any temporary files. Thank you! Pietro MacBook Pro 2009, 256 GB SSD, MacOSX 10.6.4

    Read the article

  • How to use Btrfs with compression on external USB hard drive?

    - by Andre
    I would like to make use of Btrfs' transparent compression on an external drive. Which tool is best for formatting the drive? Disk Utility or GParted? How do I activate the compression? During formatting or when I mount the drive? I guess at mount time. I'm using usbmount to automatically mount newly attached devices, because nobody is logged in on the desktop. Would I have to set general default options somewhere in a system configuration file to get Btrfs mounted with compression, or would I specify this via FS_MOUNTOPTIONS in /etc/usbmount/usbmount.conf and how? Thanks!

    Read the article

  • how to set static IP address in opensolaris

    - by pm100
    in closed solaris i knew how to do this. Edit /etc/inet/ipnodes, change /etc/defaultrouter, reboot in opensolaris there is not defaultrouter file. first thing I tried was System-admin-network switch to manual enter static address and netmask and gateway. press 'activate' "this interface cannot be activated". No error messages given. Close widget, open again. Now hangs for a minute and then closes try edit /etc/inet/ipnodes, reboot eth card not up. Network widget hangs then closes Works perfectly on DHCP

    Read the article

  • server host name and server ip address redirect (Debian, Apache)

    - by Matthias Reisner
    I have the following folder structure on my apache! .../var/www/www.x.tt/htdocs .../var/www/www.y.tt/htdocs I have defined a virtual host for each. So if I type in www.x.tt in my browser I get to the www.x.tt site. And the same for www.y.tt. But now my question! If I type in the server address or the server host name I get to the ../var/www directory but I want that the user will be redirected to the www.x.tt site! Do I have to create a new virtual host for this problem or is it also possible only to add a .htaccess Rule?! Thanks!

    Read the article

  • How to get LAN ip to a variable in a Windows batch file

    - by Ville Koskinen
    I'm streaming audio from my Windows 7 laptop to a sound card attached to a router. I have a little batch script to start streaming. REM Kill any instances of vlc taskkill /im vlc.exe "c:\Program Files\VideoLAN\VLC\vlc.exe" <parameters to start http streaming> REM Wait for vlc TIMEOUT /T 10 REM start playback on router plink -ssh [email protected] -pw password killall -9 madplay plink -ssh [email protected] -pw password wget -q -O - http://192.1.159:8080/audio | madplay -Q --no-tty-control - & As you see the http stream is hard coded. It would be nice to get the address dynamically to reuse the script on other machines. Any ideas?

    Read the article

  • Why Is Another Domain Resolving To My IP Address?

    - by Andrew
    I'm not really sure if this is something that I should worry about... I'm currently renting a dedicated server which is hosting a website I've created. The domain of the website was registered with GoDaddy. After submitting a sitemap to Google several months ago, I've noticed that another domain name is resolving to my IP address. This means that every page on my website is actually accessible from another domain. As far as I can tell, the other domain name is meaningless to me, so I'm not sure if this is something I should worry about or not. Is this a residual DNS record from another site that is probably no longer in use? Is it important from the standpoint of either security or SEO? My website is a .com which will later serve e-commerce purposes. The other domain has a top-level domain of st. It's the first one of those that I've encountered. Many thanks in advance!

    Read the article

  • What regular expression can I use to match an IP address?

    - by jennifer
    With the following grep syntax I want to match all IP address in a file (from a ksh script) grep '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}' file The problem: It also matches words (IP) that have more then 4 octets: 1.1.1.1.1 or 192.1.1.1.160 How can I match a valid IP and only IP addresses with 4 octets? I can also use Perl – a one line syntax solution, if grep doesn't work.

    Read the article

  • How to set the IP address in a customized OpenWRT compilation

    - by Berdus
    I have been struggling today customizing OpenWRT. I checkout the stable using SVN, "make menuconfig" to customize the image, "make" it and run it on a router. Almost all my modifications work, except for the (Seemingly trivial) task of changing the default 192.168.1.1 address. I tried numerous files (scripts as well as config files) but I can't seem to change it (I can change it for a brief moment after boot using the "preinit" file, but after a few seconds it reverts to default). I suspect I should be setting it in the /etc/network file, but modifications there seem to be overwritten during boot. Maybe it has something to do with the br-lan interface? Does anybody have some thoughts on the subject? Thanks!

    Read the article

  • Files turned into folders on external hard drive

    - by Kashif
    I have a networked hard drive where I like to store audio/video/software and all sorts of other files for my house. While the software files are all intact and working, many of my video and audio files have been turned into folders! Can anyone explain why this is happening, how I can prevent it, and if it is possible to revert these "folders" back into files. Thanks much! An example of what the folders are named: "Highschool Graduation.avi", "Birthday party.avi", "Somesong.mp3" The HDD is connected to a Linksys E4200 router (Firmware Version: 2.0.37). This is how the HDD is networked.

    Read the article

  • Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

    - by jgottula
    I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >