Search Results

Search found 884 results on 36 pages for 'fred hh'.

Page 27/36 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• jquery Fullcalendar : dynamic events function asp.net mvc

  - by Eran

  Hi, I'm integrating Fullcalendar into my app. Consider a manager interface where he can select an employee and then view this employee's calendar. Now basically I'm using the following jquery code in my view: <script type="text/javascript"> $(document).ready(function() { $("#calendar").fullCalendar({ defaultView: 'agendaWeek', isRTL: true, axisFormat: 'HH:mm', editable: true, events: "/Scheduler/CalendarData" }); }); </script> Now I would like to have the controller function assigned to the events to retrieve the specific user selected by the manager: events: "/Scheduler/CalendarData/<current_user_name> Is there any way to retrieve the selected employee user name from the view (or rather pass it to the view from the controler) and then pass it onto the bound events function? I hope I was clear enough... Thanks in Advance, Eran

  Read the article

• log4j category

  - by Nuno Furtado

  I have the following on my log4j.properties log4j.rootLogger = debug, stdout, fileLog log4j.appender.stdout = org.apache.log4j.ConsoleAppender log4j.appender.fileLog = org.apache.log4j.RollingFileAppender log4j.appender.fileLog.File = C:/logs/services.log log4j.appender.fileLog.MaxFileSize = 256MB log4j.appender.fileLog.MaxBackupIndex = 32 #Category: ConsultaDados log4j.category.ConsultaDados=ConsultaDados log4j.appender.ConsultaDados=org.apache.log4j.DailyRollingFileAppender log4j.appender.ConsultaDados.layout=org.apache.log4j.PatternLayout log4j.appender.ConsultaDados.layout.ConversionPattern={%t} %d - [%p] %c: %m %n log4j.appender.ConsultaDados.file=C:/logs/consulta.log log4j.appender.ConsultaDados.DatePattern='.' yyyy-MM-dd-HH-mm And im creating my logger with : myLogger = Logger.getLogger("ConsultaDados"); But this doesnt log my calls to the file. they get thrown into the rootLogger Any ideas?

  Read the article

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• Javascript DateFormat for different timezones

  - by Elie

  I'm a Java developer and I'm used to the SimpleDateFormat class that allows me to format any date to any format by settings a timezone. Date date = new Date(); SimpleDateFormat sdf = new SimpleDateFormat("dd-MM-yyyy hh:mm:ss"); sdf.setTimeZone(TimeZone.getTimeZone("America/Los_Angeles")); System.out.println(sdf.format(date)); // Prints date in Los Angeles sdf.setTimeZone(TimeZone.getTimeZone("America/Chicago")); System.out.println(sdf.format(date)); // Prints same date in Chicago SimpleDateFormat is a pretty neat solution in Java but unfortunately I can't find any similar alternative in Javascript. I'm extending the Date prototype in Javascript to do exactly the same. I have dates in Unix format but I want to format them in different timezones. Date.prototype.format = function(format, timezone) { // Now what? return formattedDate; } I'm looking for a neat way to do this rather than a hack. Thanks

  Read the article

• Daubechies-4 Transform in MATLAB

  - by Myx

  Hello: I have a 4x4 matrix which I wish to decompose into 4 frequency bands (LL, HL, LH, HH where L=low, H=high) by using a one-level Daubechies-4 wavelet transform. As a result of the transform, each band should contain 2x2 coefficients. How can I do this in MATLAB? I know that MATLAB has dbaux and dbwavf functions. However, I'm not sure how to use them and I also don't have the wavelet toolbox. Any help is greatly appreciated. Thanks.

  Read the article

• C# and T-SQL command-line Utility

  - by Chad Sellers

  Group, Part 1: I'm currently working on a command line utility that can take args and update a local database. The only issue I have is once i established a "Data connection"..how can I use those args for queries and searches. For example: ~//arrInput.exe "parm1" "pram2" "pram3" Part 2: I would like to take in command line args and use them as input parms for a "stored proc". Once finished execution....used the same inputs crate a log file. For example output file: mm-dd-yyyy hh:mm:ss - pram1,pram2,... pram1: updated/failed pram2: update/failed Thanks, Chad

  Read the article

• Adding 90000 XElement to XDocument

  - by Jon

  I have a Dictionary<int, MyClass> It contains 100,000 items 10,000 items value is populated whilst 90,000 are null. I have this code: var nullitems = MyInfoCollection.Where(x => x.Value == null).ToList(); nullitems.ForEach(x => LogMissedSequenceError(x.Key + 1)); private void LogMissedSequenceError(long SequenceNumber) { DateTime recordTime = DateTime.Now; var errors = MyXDocument.Descendants("ERRORS").FirstOrDefault(); if (errors != null) { errors.Add( new XElement("ERROR", new XElement("DATETIME", DateTime.Now.ToString("dd/MM/yyyy HH:mm:ss:fff")), new XElement("DETAIL", "No information was read for expected sequence number " + SequenceNumber), new XAttribute("TYPE", "MISSED"), new XElement("PAGEID", SequenceNumber) ) ); } } This seems to take about 2 minutes to complete. I can't seem to find where the bottleneck might be or if this timing sounds about right? Can anyone see anything to why its taking so long?

  Read the article

• Converting time to Military

  - by Chris

  Maybe I'm seeing things.. In an attempt to turn a date with a format of "mm/dd/yyyy hh:mm:ss PM" into military time, the following replacement of a row value does not seem to take. Even though I am sure I have done this before (with column values other than dates). Is there some reason that row["adate"] would not accept a value assigned to it in this case? DateTime oos = DateTime.Parse(row["adate"].ToString()); row["adate"] = oos.Month.ToString() + "/" + oos.Day.ToString() + "/" + oos.Year.ToString() + " " + oos.Hour.ToString() + ":" + oos.Minute.ToString();

  Read the article

• Log4j Dynamic Parameter

  - by cedric

  Hi. i have a j2ee web application running on spring framework and using log4j for logging. I have this line in my log4j.properties file. this will insert the logs in my database. How do I set a dynamic value in the message part so that I can somehow append the currently logged in user. The bean object containing info for the current user is in the application context. log4j.appender.dbLog.sql = INSERT INTO LOGGING (log_date, log_level, location, message) VALUES ('%d{yyyy/MM/dd HH:mm:ss}', '%-5p', '%C-%L', '%m')

  Read the article

• python search replace using wildcards

  - by tom smith

  hi somewhat confused.. but trying to do a search/repace using wildcards if i have something like: <blah.... ssf ff> <bl.... ssf dfggg ff> <b.... ssf ghhjj fhf> and i want to replace all of the above strings with say, <hh >t any thoughts/comments on how this can be accomplished? thanks update (thanks for the comments!) i'm missing something... my initial sample text are: Soo Choi</span>LONGEDITBOX">Apryl Berney Soo Choi</span>LONGEDITBOX">Joel Franks Joel Franks</span>GEDITBOX">Alexander Yamato and i'm trying to get Soo Choi foo Apryl Berney Soo Choi foo Joel Franks Joel Franks foo Alexander Yamato i've tried derivations of name=re.sub("</s[^>]*\">"," foo ",name) but i'm missing something... thoughts... thanks

  Read the article

• SimpleDateFormat give inconsistent results

  - by Julien Gagnet

  I am trying to parse a date and I am getting different results when I run the code locally/BST compare to a server in Paris/CEST. I've reproduced the issue in a the following sample. This is trying to parse the start date for the Australian Grand Prix. TimeZone tz = TimeZone.getTimeZone("AET"); DateFormat dateFormat = new SimpleDateFormat("dd/MM/yyyy HH mm"); dateFormat.setTimeZone(tz); long time = dateFormat.parse("28/03/2010 17 00").getTime(); System.out.println("Time "+time); It seems like I am setting the timezone correctly on the date format and the current timezone shouldn't be affecting the code. But locally it prints 1269756000000 and in Paris 1269759600000. Any idea?

  Read the article

• Why Java SimpleDateFormat().parse() is printing weird formate?

  - by MAK

  My input is String formated as the following: 3/4/2010 10:40:01 AM 3/4/2010 10:38:31 AM My code is: DateFormat dateFormat = new SimpleDateFormat("dd/mm/yyyy hh:mm:ss aa"); try { Date today = dateFormat.parse(time); System.out.println("Date Time : " + today); } catch (ParseException e) { e.printStackTrace(); } the output is: Sun Jan 03 10:38:31 AST 2010 Sun Jan 03 10:40:01 AST 2010 I'm not sure from where the day (Sun) came from? or (AST)? and why the date is wrong? I just wanted to keep the same format of the original String date and make it into a Date object. I'm using Netbeans 6.8 Mac version.

  Read the article

• Python: convert buffer type of SQLITE column into string

  - by Volatil3

  I am new to Python 2.6. I have been trying to fetch date datetime value which is in yyyy-mm-dd hh:m:ss format back in my Python program. On checking the column type in Python I get the error: 'buffer' object has no attribute 'decode'. I want to use the strptime() function to split the date data and use it but I can't find how to convert a buffer to string. The following is a sample of my code (also available here): conn = sqlite3.connect("mrp.db.db", detect_types=sqlite3.PARSE_DECLTYPES) cursor = conn.cursor() qryT = """ SELECT dateDefinitionTest FROM t WHERE IDproject = 4 AND IDstatus = 5 ORDER BY priority, setDate DESC """ rec = (4,4) cursor.execute(qryT,rec) resultsetTasks = cursor.fetchall() cursor.close() # closing the resultset for item in resultsetTasks: taskDetails = {} _f = item[10].decode("utf-8") The exception I get is: 'buffer' object has no attribute 'decode'

  Read the article

• Why Java SimpleDateFormat().parse() is giving weird formate?

  - by MAK

  My input is String formated as the following: 3/4/2010 10:40:01 AM 3/4/2010 10:38:31 AM My code is: DateFormat dateFormat = new SimpleDateFormat("dd/mm/yyyy hh:mm:ss aa"); try { Date today = dateFormat.parse(time); System.out.println("Date Time : " + today); } catch (ParseException e) { e.printStackTrace(); } the output is: Sun Jan 03 10:38:31 AST 2010 Sun Jan 03 10:40:01 AST 2010 I'm not sure from where the day (Sun) came from? or (AST)? and why the date is wrong? I just wanted to keep the same format of the original String date and make it into a Date object. I'm using Netbeans 6.8 Mac version.

  Read the article

• rails date field format on error

  - by ash34

  Hi, I have an input field that captures a date in my form <%= f.text_field :from_date, :style => 'width:80px;' %> The user enters the date in the following format MM/DD/YYYY. However, when there is a validation error in the model and the form is displayed back to the user with the entered values, the date format is converted to YYYY-MM-DD HH:MM:SS UTC. Where do I format this to show MM/DD/YYYY, when the form is displayed to the user. thanks.

  Read the article

• [PHP] missing keys in $_POST

  - by KPL

  Hello there, I am trying to get some form data from POST method. Here's the code of form - <form action="" method="post" name="form1" id="form1"> <input type="hidden" value="15" name="ad_id"> <table width="100%" cellspacing="0" cellpadding="0" border="0" class="block"> <tbody><tr> <td valign="top">&nbsp;</td> <td align="right">all fields are required</td> </tr> <tr> <td valign="top">&nbsp;</td> <td align="center"></td> </tr> <tr> <td valign="top" width="150"><label for="name">Advertisement Name</label> *</td> <td><input type="text" size="45" value="Banner" id="name" name="name"> e.g Home Banner</td> </tr> <tr> <td valign="top"><label for="placement">Advertisement Placement</label></td> <td><select id="placement" name="placement"> Wide Skyscrapper 160 x 600 </tr> <tr> <td valign="top"><label for="code">Advertisement Code</label></td> <td><textarea rows="5" cols="45" id="code" name="code"></textarea></td> </tr> <tr> <td>Status</td> <td><label> <input type="radio" checked="checked" value="1" name="status"> Active</label> <label> <input type="radio" value="0" name="status"> Inactive</label></td> </tr> <input type="hidden" value="1" name="banner_uploaded" id="banner_uploaded"> <tr> <td>For Country - </td> <td> <select id="country" name="country"> <option>Not posting all the names of country</option> </select> </td> </tr> <tr> <td><label for="Scheduling">Valid From </label></td> <td><input type="text" value="" id="date-from" name="date-from"> Format : dd/mm/yyyy:hh/mm</td> </tr> <tr> <td><label for="Scheduling">Valid Till </label></td> <td><input type="text" value="" id="date-to" name="date-to"> Format : dd/mm/yyyy:hh/mm</td> </tr> <tr> <td>&nbsp;</td> <td align="right"><input type="submit" onclick="return validate_ad_form(add_adv)" value="Update Advertisement" class="button" name="update"></td> </tr> </tbody></table> </form> But I am getting $_POST['code'] empty when I am passing HTML code through it. When I pass plain text, it works fine. When I printed $_POST [i.e. used - print_r($_POST) ], I got the following output - Array ( [ad_id] = 15 [name] = Banner [placement] = ad_468x60 [code] = [status] = 1 [banner_uploaded] = 1 [country] = IN [date-from] = [date-to] = [update] = Update Advertisement ) Please be known, I haven't entered the 'date-from','date-to' fields. I have entered on purpose as StackOverflow don't allow me to post images! People,any help will be highly appreciated.

  Read the article

• C++ linking issue on Visual Studio 2008 when crosslinking different projects on same solution

  - by Luís Guilherme

  I'm using Google Test Framework to set some unit tests. I have got three projects in my solution: FN (my project) FN_test (my tests) gtest (Google Test Framework) I set FN_test to have FN and gtest as references (dependencies), and then I think I'm ready to set up my tests (I've already set everyone to /MTd (not doing this was leading me to linking errors before)). Particularly, I define a class called Embark in FN I would like to test using FN_test. So far, so good. Thus I write a classe called EmbarkTest using googletest, declare a member Embark* and write inside the constructor: EmbarkTest() { e = new Embark(900,2010); } Then , F7 pressed, I get the following: 1>FN_test.obj : error LNK2019: unresolved external symbol "public: __thiscall Embark::Embark(int,int)" (??0Embark@@QAE@HH@Z) referenced in function "protected: __thiscall EmbarkTest::EmbarkTest(void)" (??0EmbarkTest@@IAE@XZ) 1>D:\Users\lg\Product\code\FN\Debug\FN_test.exe : fatal error LNK1120: 1 unresolved externals Does someone know what have I done wrong and/or what can I do to settle this?

  Read the article

• set date error on uidatepicker

  - by Matt Facer

  Hi guys, I've been stumped by the code below. I pass a string date to a UIDatePicker which seems to work on most devices, yet on some, it crashes the app. here's the code NSDateFormatter *dateFormat = [[NSDateFormatter alloc] init]; [dateFormat setDateFormat:@"HH:mm"]; NSDate *date = [dateFormat dateFromString:dateStr]; [timePicker setDate:date]; [dateFormat release]; I have a function which passes the "dateStr" variable, as follows, dateStr = @"0:0"; I cannot see what's wrong - as it works for me! (iphone 3.1.3) but it doesnt work for my tester (ipod touch 3.1.3) Can anyone see anything wrong with the code? Thanks v much. any ideas?

  Read the article

• How do I keep existing values from shifting to the right when entering keypresses into a jQuery Mask

  - by Andrew

  I have a text box I'm using as a timer display "hh:mm:ss" When I select the box and press a number, it inserts the number at the cursor location, but instead of replacing the value at that position, it shifts all existing values over. For example, the timer text box reads "01:00:35" and I replace the first minute position with 1, the timer text box will then read "01:10:03." Anybody know how to force the text box to replace, instead of insert, at the cursor position? I've tried intercepting onKeyPress, doing the replace manually, rewriting the entire timer text, and then returning false. But, that doesn't worked with a jQuery masked input, because my function runs first.

  Read the article

• Parsing a DateTime String into Custom Date and Time Format String

  - by AMissico

  With .NET, I have "Thursday, April 10, 2008 1:30:00 PM" and I want "dddd, dd MMMM, yyyy h:m:s t", "6:09:01 PM" and want ""hh:mm:ss tt", "Fri 29 Aug" and want "ddd d MMM", and so on. It seems I should be able to use DateTimeFormatInfo in some way. I figured I can format the date with each pattern returned by GetAllDateTimePatterns, and when the original date string and the formated date string match then I have the format. Yet, I want to generate custom formats, not the standard formats. I want the format string. I do not want the date. I have both the DateTime value and the formatted string value for the date. I need <formatString> as in ToString(<formatString>).

  Read the article

• Difference between dates

  - by Ben C

  I want to calculate the difference between two times, one of which is the current time, and the other is just in the format HH:MM, always in the future. If I just subtract $futuretime from $now, it should, of course, be a positive number. This works fine until... If $now is in the afternoon or evening and $futuretime is, say, 7AM next morning, how can I force it to understand the the time is always going to be in the future? (It's for working out the time of something that occurs about every half an hour during working hours, and then stops until the following morning) Thanks in advance!

  Read the article

• MYSQL query to get all entries with specific time, from PHP?

  - by meds

  I'm trying to query a mysql table which places its date in the following format: yyyy-mm-dd hh:mm:ss So it's date and time, and that's all in a single field. Now from php I want to get the time and query the table to only return entries where the date field is less than 24 hours old. I'm having issues with the system because PHPs get time seems to return the values seperately and I'm struggling to figure out how to make it work with mysql queries. This seems fairly simple but I'm quite new to php so sorry if I'm completely missing something..

  Read the article

• PHP + Code Igniter Timecode Calculation Logic Error

  - by Tim

  Hello everyone, I have what I suspect to be a logic problem with an algorithm I am using to work with Video timecode in PHP. All help is appreciated. The Objective Well basically I want to work with timecode and perform calculations For those not familiar with timecode it looks like this 01:10:58:12 or HH:MM:SS:FF 'AKA' HOURS:MINUTES:SECONDS:FRAMES I have used the script from HERE to help me with working with this format. The Problem Now can i just say that this script works!!! Timecode calculations (in this case additions) are being performed correctly. However this script continually throws the following errors, yet still produces the correct output when I try and do the following calculation 00:01:26:00 + 00:02:00:12 The errors from this calculation are shown below A PHP Error was encountered Severity: Notice Message: Undefined index: key Filename: staff/tools.php Line Number: 169 A PHP Error was encountered Severity: Notice Message: Undefined index: key Filename: staff/tools.php Line Number: 169 Line Number 169 is in the parseInput() function // feed it into the tc array $i=0; foreach ($tc AS $key=>$value) { if ( is_numeric($array["$i"]) ) { $tc["$key"]= $array["$i"]; if ($tc["$key"] < 10 && $tc["$key"] > 0 && strlen($tc['key'])==1 ) $tc["$key"]= "0".$tc["$key"]; } $i++; } return $tc; Now I should also mention that the number of times the above error is thrown depends on what I am calculating 00:00:00:00 + 00:00:00:00 returns no errors. 01:01:01:01 + 02:02:02:02 produces 8 of the above errors. For your reference, here is the code in it's entirety function add_cue_sheet_clips_process() { $sheetID = $_POST['sheet_id']; $clipName = $_POST['clip_name']; $tcIn = $_POST['tc_in']; $tcOut = $_POST['tc_out']; // string $input // returns an associative array of hours, minutes, seconds, and frames // function parseInput ($input) { // timecode should look something like hh:mm:ss;ff // allowed separators are : ; . , // values may be single or double digits // hours are least-significant -- 5.4 == 00:00:05;04 $tc= array("frames"=>"00", "seconds"=>"00", "minutes"=>"00", "hours"=>"00"); $punct= array(":", ";", ".", ","); // too big? too small? $input= trim($input); if (strlen($input)>11 || $input=="") { // invalid input, too long -- bzzt return $tc; } // normalize punctuation $input= str_replace( $punct, ":", $input); // blow it up and reverse it so frames come first $array= explode(":", $input); $array= array_reverse($array); // feed it into the tc array $i=0; foreach ($tc AS $key=>$value) { if ( is_numeric($array["$i"]) ) { $tc["$key"]= $array["$i"]; if ($tc["$key"] < 10 && $tc["$key"] > 0 && strlen($tc['key'])==1 ) $tc["$key"]= "0".$tc["$key"]; } $i++; } return $tc; } // array $tc // returns a float number of seconds // function tcToSec($tc) { $wholeseconds= ($tc['hours']*3600) + ($tc['minutes'] * 60) + ($tc['seconds']); $partseconds= ( $tc['frames'] / 25 ); $seconds= $wholeseconds + $partseconds; return $seconds; } // float $seconds // bool $subtract // returns a timecode array // function secToTc ($seconds=0, $subtract=0) { $tc= array("frames"=>"00", "seconds"=>"00", "minutes"=>"00", "hours"=>"00"); $partseconds= fmod($seconds, 1); $wholeseconds= $seconds - $partseconds; // frames if ($subtract==1) $tc['frames']= floor( $partseconds * 25 ); else $tc['frames']= floor( $partseconds * 25 ); // hours $tc['hours']= floor( $wholeseconds / 3600 ); $minsec= ($wholeseconds - ($tc['hours'] * 3600)); // minutes $tc['minutes']= floor( $minsec / 60 ); // seconds $tc['seconds']= ( $minsec - ($tc['minutes'] * 60) ); // padding foreach ( $tc AS $key=>$value ) { if ($value > 0 && $value < 10) $tc["$key"]= "0".$value; if ($value=="0") $tc["$key"]= "00"; } return $tc; } // array $tc // returns string of well-formed timecode // function tcToString (&$tc) { return $tc['hours'].":".$tc['minutes'].":".$tc['seconds'].";".$tc['frames']; } $timecodeIN = parseInput($tcIn); $timecodeOUT = parseInput($tcOut); // normalized inputs... $tc1 = tcToString($timecodeIN); $tc2 = tcToString($timecodeOUT); // get seconds $seconds1 = tcToSec($timecodeIN); $seconds2 = tcToSec($timecodeOUT); $result = $seconds1 + $seconds2; $timecode3 = secToTc($result, 0); $timecodeDUR = tcToString($timecode3); $clipArray = array('clip_name' => $clipName, 'tc_in' => $tcIn, 'tc_out' => $tcOut, 'tc_duration' => $timecodeDUR); $this->db->insert('tools_cue_sheets_clips', $clipArray); redirect('staff/tools/add_cue_sheet_clips/'.$sheetID); } I hope this is enough information for someone to help me get on top of this, I would be extremely greatful. Thanks, Tim

  Read the article

• Extracting text from a file where date -time is the index

  - by Soham

  I have got around 800 files of maximum 55KB-100KB each where the data is in this format Date/Time/Float1/Float2/Float3/Float4/Integer Date is in DD/MM/YYYY format and Time is in the format of HH:MM Here the date ranges from say 1st May to 1June and each day, the Time varies from 09:00 to 15:30. I want to run a program so that, for each file, it extracts the data pertaining to a particular given date and writes to a file. I will not face any problem in writing into directory operations. I am trying to get around, to form a to do a search and extract operation. I dont know, how to do it, would like to have some idea. Thanks Soham

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >