Search Results

Search found 694 results on 28 pages for 'lenovo'.

Page 27/28 | < Previous Page | 23 24 25 26 27 28  | Next Page >

  • Weirdly high ping on direct ethernet connection?

    - by Antriel
    I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

    Read the article

  • XP/Intel wirelss only showing 'hpsetup' ad-hoc network that isn't there

    - by ewall
    Trying to help my friend with her work XP laptop, which recently stopped seeing any wireless SSIDs except the SSID 'hpsetup' (presumably from a wireless-enabled HP printer). Relevant information: The laptop is a Lenovo T500 (Centrino 2 chipset) with XP SP3. The network adapter is Intel WiFi Link 5300 AGN (built-in). The latest version (13.5) of the Intel drivers only are installed, not the Intel config software, so XP is using the Wireless Zero-Config manager. The wireless router is a NetGear WGR614 v7 with 802.11b/g. The SSID is broadcasting, and all the other laptops in the house can see and connect to it. On the laptop, I have tried repairing the network connection, disabling power management, turning off 802.11a & n radio, and more... but it didn't help. Some of the wireless settings are managed by Group Policy from her office (I get the "At least one of your changes was not applied successfully to your wireless configuration" message). It is enforced to connect to "Access point (infrastructure) networks only". The real kicker is that my laptop does not an SSID named 'hpsetup' here, but it can see several broadcasted SSIDs including the one we want, while my friend's laptop doesn't see any SSID except 'hpsetup'. Any suggestions?

    Read the article

  • Internet Problem: Wireless connected but no connection to internet

    - by Josh K
    Hey i have a interesting network setup on a laptop here and for some reason the internet isnt working. I am connected to a secure network via wireless router and taskbar says i am connected and with good signal strength but in my internet browser i cant connect to any websites, the error is: This webpage is not available. (Chrome) I am using Chrome, but websites dont work on IE either. Heres a little background on the setup i have. I have a Ethernet connected to the laptop with a static ip, and then i have the wireless setup with DHCP enabled. I am using the ethernet to connect to the network (for remote desktop) but the wireless for internet (to avoid the network firewalls). this set up has worked fine for a few months, but i cant figure out what is going on now. Might be worth it to note it is a Lenovo Thinkpad and i just uninstalled ThinkVantage Access Connections (as it was giving me ample problems prior to this one, which i consider a step up) Tried repairing connection as well, let me know if you guys have any ideas please! EDIT: Solved-Dead Modem in the server room.... Sorry guys didn't have access to that myself

    Read the article

  • Make UEFI, GPT, Bootloader, SSD, USB, Linux and Windows work together

    - by user129552
    I like to use the latest hardware and the latest software; thus I have a Laptop (Lenovo X220) with UEFI instead of BIOS an SSD instead of an HDD GPT partitioning scheme instead of MBR USB to boot from instead of optical disks. I need to use both Windows and Linux. I tried to make them work alongside, but I didn't succeed. Most Linux distribution isos don't even really work on UEFI systems booted from USB. (Not even the self-claimed cutting-edge Fedora. I also tried Linux Mint Debian Edition and Sabayon Linux (according to this guide) which did not work. Only Ubuntu worked for me. I first installed Windows 8 which created sda1: Recovery, sda2: EFI system, sda3: msftres, sda4: NTFS Windows. Windows worked without a problem. I then created sda5: linux-swap and installed Ubuntu into sda6: btrfs. After rebooting, I was not presented GRUB2 as expected, but instead my system just booted into Ubuntu. I could no longer access Windows. After fixing dpkg in btrfs Ubuntu, I followed the Ubuntu documentation on UEFI booting. The result left me with a broken GRUB2, but interestingly, when I wanted to select the device to boot from, I was not only presented the internal SSD, an attached USB device, or LAN, but also Grub2 (broken), Ubuntu and Windows. The result is not very satisfying to me. What would I have to do to fix everything? Or differently asked, what operating system should I install at what point given my possibilities and requirements, so that I have a working bootloader in my UEFI GPT system which presents me a working Linux and Windows.

    Read the article

  • Broken Vista. Can't open Windows settings.

    - by serena
    My neighbor has a Lenovo laptop with Windows Vista Home Basic. She's a noob and just uses the laptop for internet purposes. She said she had to close down Windows improperly (sometime ago, maybe 6 months) because of system freeze. She realized there's something wrong with her Windows when she tried to open Windows update settings. I took a look at the system and determined the following errors: When I click on Windows Updates, a bare white window opens for a sec. and closes immediately. When I try to open Computer Properties, the same thing happens. (Windows+Break doesn't work either.) When I try to open Bluetooth settings, the same thing happens. So Vista won't let me open any Windows settings, but installed programs work correctly (games, applications etc.). She has no Windows Vista discs since the laptop came with preinstalled genuine Vista. She also has no recovery discs. I don't think there is a system restore point for the time the system was stable. Now what can we do to solve this big problem?

    Read the article

  • What to do about old MacBook

    - by John
    I have a White MacBook version 10.5.8. I accidentally dropped it and about an inch of the most right side of the screen is blacked out. I can't see the clock and Trash Can because of this. I checked how much it would cost to repair, and the cost of repairing is a flat rate of $300. I thought that was kind of expensive, like a third of the cost of the MacBook itself. accidentally dropping a notebook is something that would happen sooner or later, so I think getting a Lenovo is the best. I ended up getting a MacBook pro 15 inch, but do you think it's worth the money to fix my old MacBook? I even saw some used MacBooks available on Ebay for about $400. Anyways I don't know what to do with it. I do like its screen and keyboard better than the MacBook Pro ones, because the screen is less glare-y and the keyboard is more crisp and fun to type on, and its more wieldy when I'm using it while lying down.

    Read the article

  • Second CPU missing of Dual Core

    - by Zardoz
    My Lenovo T61 has a dual core CPU. I just noticed that under Ubuntu 10.10 only one CPU is recognized. I know that once both CPUs worked. Not sure since when the second CPU is missing. Maybe since the last kernel update. Currently I am using linux-image-2.6.35-23-generic (for x86_64). What can I do to enable the second CPU again? Here the ouput of /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping : 6 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 4189.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: Any help is welcome. I really need that CPU power for my work here.

    Read the article

  • Lost Windows 7 boot after EasyBCD with EFI

    - by drent
    I've got a Lenovo Y580 with a 64GB SSD and a 1TB HDD setup using GPT and setup to boot from (U?)EFI. I was trying to get my Linux Mint installation on the Windows boot manager using EasyBCD (I didn't realise EFI but it wiped my boot partition/loader and I cannot seem to get Windows back (and I still can't get a bootable Linux Mint). Using the System Recovery utility, Startup Repair can't "see" windows (it might be because I'm using a 7 Pro disk to recover Home Premium?). In command prompt, Bootrec tools don't do anything and bootsect can't run because it says that it's for BIOS only and I've booted with EFI. I can see the EFI data on the 200mb SSD partition using diskpart but I don't know how to add Windows back onto whatever bootloader I have/need. At the moment the only options I can see are: Do a fresh install of Windows and hope that the setup remains as fast as the default one (the SSD is some kind of cache for Windows but I can't quite see how it works given that the rest of the SSD is unpartitioned space). This seems like overkill given that Windows was working fine til EasyBCD deleted it. Try forcing BIOS mode and see if that somehow magically fixes things Try converting from GPT to MBR to try and use the bootrec/bootsect tools (and maybe back again) which seems like a really bad idea. Anyone have any ideas?

    Read the article

  • Can I clone my hard drive to an external and boot from the clone?

    - by willbuntu
    First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

    Read the article

  • Fedora 19 no longer bootable

    - by Parisa
    I had fedora dual-booted with windows on my laptop for a while but with windows refresh grub was gone and my system directly booted windows. I booted fedora with my systems boot options and with this tutorial: https://fedoraproject.org/wiki/GRUB_2 I reinstalled grub2 but then had my system booted into an empty grub prompt: grub So I found the drive containing vmlinuz and initramfs (completely sure about thair location and versions) and tried to manually boot it but after the boot command it said: no suitable video mode found booting in blind mode and nothing happened. Such a tragedy... I have already tried to use live disks rescue system. Funny but troubleshooting options don't apear on my laptop while they do on my desktop pc. I cant even go to boot prompt on my lenovo idepad z400 laptop. I also tried EasyBCD so maybe I could boot it with windows but it comes up with this error: missing AutoNeoGrub().mbr Now I have removed the grub prompt (don't know why) and its really hard for me to reinstall my dearly customized fedora. If anyone knows a way to help boot it again or reinstall it keeping my files and installations I really need it. Thanks PS:I have already tried Boot-repair Disk but it asks me to enable the repo containing grub-efi on my fedora to reinstall the grub2 and fix the boot for me (how could i?).

    Read the article

  • Hibernation fails; The system cannot find the file specified

    - by GMMan
    Recently I installed Ubuntu 12.04.1 LTS on my Lenovo Y480. Hibernation was working properly after the Ubuntu install, but I was making sure all of the operating systems on my system worked, including OneKey Recovery (recovery partition). It is of note that I installed Windows 7 from scratch with a disk image I downloaded off of my university's DreamSpark program, and further to that I had to image the partition with Paragon Backup & Recovery, repartition to convert the Windows partition to extended, install Ubuntu, and then restore the image. During that process I also used the Windows disc to edit the BCD as to reuse the existing entry for the restored partition. I also used the automated "repair your computer" option. With verification, I noticed that the "repair your computer" option actually wrote to the wrong BCD (the recovery partition), and I mounted the partition and restored the original BCD (from a copy I made earlier), and rebooted. At this point my GRUB broke, and I was able to restore it. At this point hibernation broke. I tried powercfg /h off and powercfg /h on, rebooted, and nothing. Also tried increasing the hibernation file size as directed on this post, but it still doesn't work. Executing shutdown /h yields The system cannot find the file specified.(2). What file? It seems that mounting the system partition sometimes works, but I don't want to keep it mounted in case it gets written to accidentally. How do I permanently fix this?

    Read the article

  • Windows 7 not booting up and stuck at startup repair

    - by mikimr
    I've been having issues with Windows 7 Home Premium on a Lenovo laptop. At first, it would not start up normally at all. I started it in Safe Mode, where I disabled all non-MS services and tried again to no avail. It then goes into Startup repair where it failed several times. I tried copying the original registry settings, still the same. I resorted to booting with an Ubuntu DVD, where I ran the boot-repair, where it is supposed to correct the Windows boot. No luck. I used Win7 DVD to start up from there, where I had the option to install or repair. I chose the repair, got into command prompt, ran chkdsk /i /r, where it found 3 unreadable segments, went through the 2nd step without issues, and the 3rd step completed with some errors (can't recall the exact errors). When I restarted the machine, it went to straight to the Stratup Repair, indicating "Attempting repairs... Repairing dis errors. This might take over an hour to complete." It's been like this for nearly 15 hours. When I try to cancel or close the Startup Repair window, I get a message "The current repair operation cannot be cancelled." Should I let it run or force shut the machine? If force shut, how can I resolve this problem? Thanks.

    Read the article

  • Laptop CPU fan not working properly

    - by Smith
    My laptop's CPU fan is suddenly acting very bizarre, and I am at a loss for what to do so I am asking for some help. Specifically, the fan is not even starting to spin until the CPU reaches 60 degrees Celsius (checked through HWmonitor). Once it is on, however, it properly stays on even when the CPU gets back to idle temps around 38 Celsius. Before, the fan was simply starting with the computer and staying on like normal. I've checked this for consistency both by allowing cold boots to ramp up temperature to 60 Celsius (the slow climb also causing the laptop to become unreasonably warm near the heatsink), and also running Prime95 immediately to kickstart the fan (this works every time). The fan seems to be stationary when turning the computer on from either sleep or shutdown. The fan will start at POST very briefly, and then stop completely. I've checked the BIOS for a SmartFan setting but haven't found any. I've opened the case to check for dust or debris and have not found anything (I applied some canned air to the area just in case). The laptop is a Lenovo ThinkPad Edge E430 and the CPU is an Intel Core i5 3210m @ 2.5 GHz. Any advice would really be appreciated.

    Read the article

  • How to use non-free drivers during debian install

    - by blokeley
    I'm trying to install debian stable using unetbootin. The install process fails with "network autoconfiguration failed", probably due to the ethernet driver not working. My Lenovo U350 has a Broadcom BCM57780 which does not seem to be supported out-of-the-box: there are various bug reports here, here and here, but I don't know if the fix has made it into debian (6) stable. One discussion says that you have to use an ethernet driver from the firmware-linux-nonfree package. I'm not sure that this is correct because the BCM57780 is not in the list of drivers in firmware-linux-nonfree. The specific question tree is: Is BCM57780 supported in debian stable? If so, what could be wrong? Should I install debian unstable instead? If not, do I need to use firmware-linux-nonfree during installation and, if so, how do I do this? Please note: I've used ubuntu and debian loads in the past but please post line-by-line guidance rather than some cryptic abbreviation of any instructions. Thanks in advance for any help. Updates: Debian stable with non-free drivers did not work. Debian unstable (free drivers only) did not work. Tried loading firmware-iwlwifi_0.28_all.deb from another USB stick to get wireless working rather than BCM57780. The .deb file was found but the network configuration still failed! That's it, I'm giving up. Unfortunately I'll use ubuntu even though the Unity user interface will be very unstable for the next couple of years :(

    Read the article

  • How to change font size on display

    - by Tim
    My laptop is Lenovo T400, whose screen size is 14.1 inches and default resolution is 1440 x 900. My main OS is Ubuntu 10.10. The default font size on the display is somehow small, which might contribute to the fatigue of my eyes. My previous laptop is Acer 5000, whose screen size is 15.4 inches and the default resolution is 1024 x 768. I like reading on my old laptop better than on my new one. Is it possible to change the setting of my new one to look like reading my old one? What are the parameters that control the font size? Are screen size, resolution part of them? In Windows, there are choices for font size, while in Ubuntu I haven't find out where I can change the setting and would like know if someone here knows about it. I also wonder if I can use a separate bigger display (perhaps just like a desktop display) as the display of my laptop, in case I don't want to enlarge font size at the cost of sacrificing the amount of the content to display, and how I shall do it? Thanks and regards!

    Read the article

  • Running Windows 7 physical disk virtualized under Linux

    - by CajunLuke
    I have an existing Windows 7 installation that I'd like to virtualize under Linux. Windows boots fine on Disk A, Linux boots fine on Disk B. (Both disks are SATA.) I can mount the Windows disk when in Linux. I've tried VirtualBox and VMWare Player and neither will allow me to boot from the other disk. VirtualBox doesn't seem to have the option to do so. VMWare Player has the option to have an IDE drive exposed to the virtual environment as a SCSI disk. I've tried that, but it throws the error "Cannot connect virtual device ide1:0 because no corresponding device is available on the host." I've verified that it's pointing to the correct hard drive. I'm willing to try other virtualization products, and I'm not averse to spending a little money to get this to work. I've seen this other question, and it's not a duplicate, as I haven't gotten that far yet. I'm also interested in solutions going the other way (Linux on Windows), but that'd be lagniappe. Gory Hardware Details: Lenovo T410, 2.4 GHz Core i5 (has virtualization extensions), 4GiB RAM, 2x 320 GiB SATA HDD, one in optical bay. Fedora 14 2.6.35.10-74.fc14.x86_64, Windows 7 32-bit.

    Read the article

  • Older monitor not working with HDMI to DVI cable (from ultrabook)

    - by ShellfishGene
    I have a Lenovo Yoga ultrabook which only has a HDMI port. I bought an HDMI to DVI cable, and it works as expected with a LG monitor in my office. As soon as I plug it in the screen is cloned. At home I have an older Dell UltraSharp 2005fp, and for that one it does not work. When I plug the cable in "something" happens, the monitor goes from the "no signal" screen to black. On the laptop however nothing happens. In the Windows 8 display setup I don't have another monitor, clicking "detect" does not find one either. I can manually set a second display for cloning or extending, but never get a picture on the Dell. Connecting my media player thing with the cable to the Dell monitor works for when the player displays it's logo at a low resolution, but when it goes into 750p mode after booting the picture also goes away. Mabye that's due to HDCP though. Any ideas? Something to do with Windows 8, or DVI versions?

    Read the article

  • Windows 7 host with Ubuntu Guest and a performance hit, memory locks?

    - by Cyrylski
    I have a brand new Lenovo T510 with Core i5 and 4GB of RAM with Windows 7 on it. I Installed Ubuntu 10.10 in a Virtualbox. For some reason system gets really slow on this setup which makes me really angry. There's a video card shared with full 3D support enabled and 1GB of RAM allocated for the Ubuntu machine. It may sound stupid, but WHY is the whole memory consumed in an instant when I run Virtualbox? I struggled for like 10 minutes restraining myself from a brutal reset, and now everything runs smooth but memory "in use" in Resource Monitor is 3GB flat with only Chrome running. I'm new to Windows 7, but I'm really disappointed with performance at this point... I used to work in a different environment with much slower hardware and there was no such problem (WinXP over Ubuntu, 1GB out of 2GB allocated for WinXP guest on intel GMA). This is, until I clogged RAM totally there. But I was capable of running Chrome, Firefox and Apache server on a 1GB RAM in Ubuntu there and Photoshop CS4 on Windows XP and it worked. In this case I can't go beyond setting up Ubuntu properly. I bet I'm doing something wrong.

    Read the article

  • Strange network issue (ZIP file fails CRC test over VPN)

    - by Joe Schmoe
    We have a server in the office running Windows Server 2003 Our office is connected to our datacenter via hardware VPN (Linksys RV082 router in the office to CISCO router in the datacenter). There is a job that runs on the server in the office that does following: ZIP certain files from the server using 7Zip, copy ZIP file to a network share in the office and verify ZIP integrity, copy ZIP file to a network share in the data center and verify ZIP integrity. Problem is - verifying ZIP integrity for the file in the data center always fails. However, if I run 7Zip on the server in data center that exposes that share ZIP file verifies just fine, so it is not actually corrupted during copy operation. Additionally, I tried running ZIP on other computers in the office to verify ZIP file on datacenter file share and it verifies OK. I tried plugging server to the same network port where my workstation is connected using different cable (my workstation doesn't exhibit this problem) and ZIP verification still fails. So the problem is local to that specific server. On network adapter properties for the server in question there is no "Advanced" tab where one can usually configure a lot of network settings. Network card driver is up to date (Windows Update doesn't find anything newer and Lenovo website doesn't have any drivers for Windows 2003 for this computer model). Is there any other way to configure network setting via command line? What settings could be relevant to this problem?

    Read the article

  • How to access files on a USB-connected NTFS disk removed from a Win7 notebook?

    - by yosh m
    My daughter seems to have fried her motherboard in her Lenovo Notebook. The disk seems to be fine. I removed the disk and used a universal disk-to-USB kit to attach it to another computer. The disk is recognized fine and I can peruse it in Windows Explorer. The problem is that the files she would like to recover from it are located in places that Windows refuses to let me access. When I try, for example, to enter the directory "Documents and Settings" it gives me an "Access is denied" error. Same thing when I try to go into the various User directories and other locations. I thought to try creating a Ghost image & retrieve the files from that, but Ghost seems to croak when I try to run it - apparently it doesn't like accessing the disk via a USB connection (even though I've told it to install the drivers for USB). Any other ideas about how to get to the files I need, either through Windows or perhaps some other OS that I could boot from a CD that can read an NTFS disk? Thanks, Yosh

    Read the article

  • System requirements for running windows 8 (basic office use) in virtualbox (ubuntu as host os)

    - by Tor Thommesen
    I want to run windows 8 as a guest os with virtualbox on some thinkpad (haven't bought one yet) running Ubuntu 12.04. Apart from virtualizing windows 8 (mostly just for use with the office suite app) my needs are very modest, I don't need much more than emacs and a browser. What I'd like to know is what kind of specs will be necessary to run windows 8 well as a vm, using the office apps. It would be a shame to waste money on overpowered hardware. Are there any official guidelines from oracle or windows on this? Would this lenovo x220, for example, be sufficiently strong? The specs below were taken from this review. Intel Core i5-2520M dual-core processor (2.5GHz, 3MB cache, 3.2GHz Turbo frequency) Windows 7 Professional (64-bit) 12.5-inch Premium HD (1366 x 768) LED Backlit Display (IPS) Intel Integrated HD Graphics 4GB DDR3 (1333MHz) 320GB Hitachi Travelstar hard drive (Z7K320) Intel Centrino Advanced-N 6205 (Taylor Peak) 2x2 AGN wireless card Intel 82579LM Gigabit Ethernet 720p High Definition webcam Fingerprint reader 6-cell battery (63Wh) and optional slice battery (65Wh) Dimensions: 12 (L) x 8.2 (W) x 0.5-1.5 (H) inches with 6-cell battery Weight: 3.5 pounds with 6-cell battery 4.875 pounds with 6-cell battery and optional external battery slice Price as configured: $1,299.00 (starting at $979.00)

    Read the article

  • Can't install flash on Firefox or Chrome (but works fine on IE...)

    - by WP
    I'm using a work computer (Lenovo) that I recently got from my IT department to replace an old machine. When I installed Firefox and Chrome, I needed to install Adobe Flash. However, the installation has failed on several occasions. I've taken all the usual steps: closing all programs and windows, installing updates and restarting machine, etc, but still the installation does not work. The download manager and status bars say that installation is complete, but I still can't view flash sites on FF or Chrome. Flash is working fine on IE though. Last thing: when I reboot the first dialog box that comes up is from Adobe Download Manager, and it says "Please shut down Internet Explorer before uninstall can complete". I'm confused since a) I've just rebooted so have yet to start IE and b) why UNinstall? My company does not support non-IE browsers so I'm not getting much help from our IT department. If necessary I can post screenshots of error messages and stuff if it comes to that, but hopefully someone will be able to diagnose the problem before that's necessary as I'm not the most tech savvy (despite being a huge fan of reddit...)

    Read the article

  • Ultra-Portable Laptop or Tablet PC for Development and Sketching

    - by Nelson LaQuet
    I am a software developer that primarily writes in PHP, [X]HTML, CSS, Javascript, C# and C++. I use Eclipse for web development, Visual Studio 2008 for C++ and C# work, TortoiseSVN, Subversion server for local repositories, SQL Server Express, Apache and MYSQL. I also use Office 2007 for word processing and spreadsheets and use Vista Ultimate 64 as my primary operating system. The only other things I do on my laptop are watch movies, surf the internet and listen to music. I currently have a Acer Aspire 5100 (1.4 GHz AMD Turion X2, 2 GB of RAM and a 15.4" screen). This thing does not cut it in performance or portability, and in addition, my DVD drive failed. And before anybody posts about vista: I have had XP Professional 32 on it for the last two years, and recently upgraded to Vista 64. It is actually faster (with areo disabled) then XP; so it is not the OS that is causing the laptop to be slow. I usually sketch a lot, for explaining things, developing user interfaces and software architecture. Because of my requirements, I was thinking about a Lenovo X61 Tablet PC. It outperforms my current laptop, is significantly more portable, and... is a tablet. My question is: do any other software developers use this (or other tablets) for programming? Does it help to be able to sketch on the computer itself? And is it capable of being a good development machine? Will it handle the above software listed? If not, what is the best ultra-portable laptop that is good for programming? Or are ultra-portable laptops even good for programming? I could manage with my 15.4" screen, but am spoiled by my two 19" at my home desktop and my job's workstation.

    Read the article

  • How to check for mip-map availability in OpenGL?

    - by Xavier Ho
    Recently I bumped into a problem where my OpenGL program would not render textures correctly on a 2-year-old Lenovo laptop with an nVidia Quadro 140 card. It runs OpenGL 2.1.2, and GLSL 1.20, but when I turned on mip-mapping, the whole screen is black, with no warnings or errors. This is my texture filter code: glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_GENERATE_MIPMAP, GL_TRUE); After 40 minutes of fiddling around, I found out mip-mapping was the problem. Turning it off fixed it: // glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); // glTexParameteri(GL_TEXTURE_2D, GL_GENERATE_MIPMAP, GL_TRUE); I get a lot of aliasing, but at least the program is visible and runs fine. Finally, two questions: What's the best or standard way to check if mip-mapping is available on a machine, aside from checking OpenGL versions? If mip-mapping is not available, what's the best work-around to avoid aliasing?

    Read the article

  • Unable to Connect to Management Studio Server

    - by Phil Hilliard
    I have a nasty situation. I am using Microsoft SQL Server Management Studio Express edition locally on my pc for testing, and once tested I upload database changes to a remote server. I have a situation where I deleted the Default Database on my local machine, and instead of searching hard enough to find an answer to that problem, I uninstalled and reinstalled Management Studio. Since then Management Studio has not been able to connect to the server. Is there any help (or hope for me for that matter), out there????? The following is the detailed error message: =================================== Cannot connect to LENOVO-E7A54767\SQLEXPRESS. =================================== A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 ------------------------------ Error Number: -1 Severity: 20 State: 0 ------------------------------ Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

    Read the article

< Previous Page | 23 24 25 26 27 28  | Next Page >