Search Results

Search found 5643 results on 226 pages for 'machines'.

Page 27/226 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • How to control admission policy in vmware HA?

    - by John
    Simple question, I have 3 hosts running 4.1 Essentials Plus with vmware HA. I tried to create several virtual machines that filled 90% of each server's memory capacity. I know that vmware has really sophisticated memory management within virtual machines, but I do not understand how the vCenter can allow me even to power on the virtual machines that exceed the critical memory level, when the host failover can be still handled. Is it due to the fact that virtual machines does not use the memory, so that it is still considered as free, so virtual machines can be powered on ? But what would happen if all VMs would be really using the RAM before the host failure - they could not be migrated to other hosts after the failure. The default behaviour in XenServer is that, it automatically calculates the maximum memory level that can be used within the cluster so that the host failure is still protected. Vmware does the same thing ? The admission policy is enabled. Vmware HA enabled.

    Read the article

  • scritp to create automatically ext4 and swap in unallocated diskspace

    - by user285589
    i've to install a number of machines. Some machines have windows 7 installed. Some machines not. The machines have 0 or 2 or 3 partitions. Every machine has enough free diskspace (20 to 250 GB) I installed an "golden client" and build an tar archiv of this client. Now, every client boots up a small linux via pxe, and run a script. This script should create a ext4 and a swap partition using the whole free space. After this, mount the ext4-partition, copy tar, chroot, and so on. The problem still is: I can create partitions using fdisk. But how can i figure out the partion number of the new partition. Do i have to mount /dev/sda3 or /dev/sda1? Someone an idea? Further question: How can i figure out, if the is unallocated space, and how much it is? Thanks

    Read the article

  • Migrating a Windows Server to Ubuntu Server to provide Samba, AFP and Roaming Profiles

    - by Dan
    I'm replacing our old Windows XP Pro office server with a HP Microserver running Ubuntu Server 12.04 LTS. I'm not a Linux expert but I can find my way around a terminal prompt, I'm a Mac user by choice. The office use a mix of Windows XP Pro machines and OSX Lion laptops. I included Samba during installation, and I'm planning on using Netatalk for the AFP and Bonjour sharing. I'd quite like to have samba make the server appear in 'My network places' on the Windows machines the way Bonjour makes it appear in finder on the Macs, if this is possible? I want to get to a point so that a user logging into Windows, gets connected to the Ubuntu server (do they need an Ubuntu user account?) which get them their shares and their Windows user profile (though a standard profile across users would do). The upshot is to make centralised control of user accounts (e.g. If a person leaves, killing their account on the server stops their Windows logon and ability to access Samba shares) and to ensure files aren't stored on the individual machines for backup/security purposes. I want to make this as simple as possible, so don't want to have loads of stuff I don't need, I just can't figure out: What I need at the server end: - will Samba be enough (already installed as part of initial installation), or will I need to cock around with LDAP (and how does this interact with Samba) - For someone of moderate Linux competence like me, is there a package that offers easy admin of user accounts, e.g. a GUI like phpLDAPadmin (if LDAP is necessary) How to configure the XP machines: - do I need to have the XP machines set up as a domain controller (I've no idea, really) - roaming profiles looks to offer the feature of putting the user's files on the server rather than the machine itself along with a profile that follows the user from machine to machine. Syncing Mac user's home folders with the server This is less of a concern because I can set up Time Machine if it comes to it, but I'd appreciate any recommendations of what approach I should take having the Mac home folders synced to the server.

    Read the article

  • Disable "Windows Firewall with Advanced Security" for all profiles(Domain,Public,Standard) in local GP using script help! Windows 7 Clients

    - by JoBo
    We need Windows7 with windows firewall to be turned off , so the GOLD image has windows firewall turned off for all profiles(Domain,Public,Standard) and Windows Service disabled No the same GOLD image deployed with MDT (Apply local GPO) has enabled Windows Firewall under "Windows Firewall with Advanced Security" as part of task sequence Now we need to remove it. "These machines are now on Domain where in we have no rights/control on the domain level GPO", we have local admi rights on these machines We have a requirement do set the "Windows Firewall with Advanced Security" to "NOT Configured" or "OFF "on these machines In gpedit.msc if we manually go to "Windows Firewall with Advanced Security" after enabling Windows Firewall Services then can Clear the settings Do do the same manually on all machines is extra effort Changing values in registry will get reverted on machine restart as its getting applied from local GPO Also using GPMC can connect to remote computer and can manually or using wfw file we can make it not configured but we are looking for a script or a less effort method to accomplish this Please suggest NB: CIA has already reported similar issue//How do I turn off Windows 7 Firewall via script or through automation?// , but doing netsh advfirewall set allprofiles state off on already deployed machines did not make change (FW service on all machine is disabled in GOLd image)// Thanks and Regards Jose

    Read the article

  • Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c

    - by Richard Rotter
    Cloud Computing? Everyone is talking about Cloud these days. Everyone is explaining how the cloud will help you to bring your service up and running very fast, secure and with little effort. You can find these kinds of presentations at almost every event around the globe. But what is really behind all this stuff? Is it really so simple? And the answer is: Yes it is! With the Oracle SW Stack it is! In this post, I will try to bring this down to earth, demonstrating how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing.But let me cover some basics first: How fast can you build a cloud?How elastic is your cloud so you can provide new services on demand? How much effort does it take to monitor and operate your Cloud Infrastructure in order to meet your SLAs?How easy is it to chargeback for your services provided? These are the critical success factors of Cloud Computing. And Oracle has an answer to all those questions. By using Oracle VM for X86 in combination with Enterprise Manager 12c you can build and control your cloud environment very fast and easy. What are the fundamental building blocks for your cloud? Oracle Cloud Building Blocks #1 Hardware Surprise, surprise. Even the cloud needs to run somewhere, hence you will need hardware. This HW normally consists of servers, storage and networking. But Oracles goes beyond that. There are Optimized Solutions available for your cloud infrastructure. This is a cookbook to build your HW cloud platform. For example, building your cloud infrastructure with blades and our network infrastructure will reduce complexity in your datacenter (Blades with switch network modules, splitter cables to reduce the amount of cables, TOR (Top Of the Rack) switches which are building the interface to your infrastructure environment. Reducing complexity even in the cabling will help you to manage your environment more efficient and with less risk. Of course, our engineered systems fit into the cloud perfectly too. Although they are considered as a PaaS themselves, having the database SW (for Exadata) and the application development environment (for Exalogic) already deployed on them, in general they are ideal systems to enable you building your own cloud and PaaS infrastructure. #2 Virtualization The next missing link in the cloud setup is virtualization. For me personally, it's one of the most hidden "secret", that oracle can provide you with a complete virtualization stack in terms of a hypervisor on both architectures: X86 and Sparc CPUs. There is Oracle VM for X86 and Oracle VM for Sparc available at no additional  license costs if your are running this virtualization stack on top of Oracle HW (and with Oracle Premier Support for HW). This completes the virtualization portfolio together with Solaris Zones introduced already with Solaris 10 a few years ago. Let me explain how Oracle VM for X86 works: Oracle VM for x86 consists of two main parts: - The Oracle VM Server: Oracle VM Server is installed on bare metal and it is the hypervisor which is able to run virtual machines. It has a very small footprint. The ISO-Image of Oracle VM Server is only 200MB large. It is very small but efficient. You can install a OVM-Server in less than 5 mins by booting the Server with the ISO-Image assigned and providing the necessary configuration parameters (like installing an Linux distribution). After the installation, the OVM-Server is ready to use. That's all. - The Oracle VM-Manager: OVM-Manager is the central management tool where you can control your OVM-Servers. OVM-Manager provides the graphical user interface, which is an Application Development Framework (ADF) application, with a familiar web-browser based interface, to manage Oracle VM Servers, virtual machines, and resources. The Oracle VM Manager has the following capabilities: Create virtual machines Create server pools Power on and off virtual machines Manage networks and storage Import virtual machines, ISO files, and templates Manage high availability of Oracle VM Servers, server pools, and virtual machines Perform live migration of virtual machines I want to highlight one of the goodies which you can use if you are running Oracle VM for X86: Preconfigured, downloadable Virtual Machine Templates form edelivery With these templates, you can download completely preconfigured Virtual Machines in your environment, boot them up, configure them at first time boot and use it. There are templates for almost all Oracle SW and Applications (like Fusion Middleware, Database, Siebel, etc.) available. #3) Cloud Management The management of your cloud infrastructure is key. This is a day-to-day job. Acquiring HW, installing a virtualization layer on top of it is done just at the beginning and if you want to expand your infrastructure. But managing your cloud, keeping it up and running, deploying new services, changing your chargeback model, etc, these are the daily jobs. These jobs must be simple, secure and easy to manage. The Enterprise Manager 12c Cloud provides this functionality from one management cockpit. Enterprise Manager 12c uses Oracle VM Manager to control OVM Serverpools. Once you registered your OVM-Managers in Enterprise Manager, then you are able to setup your cloud infrastructure and manage everything from Enterprise Manager. What you need to do in EM12c is: ">Register your OVM Manager in Enterprise ManagerAfter Registering your OVM Manager, all the functionality of Oracle VM for X86 is also available in Enterprise Manager. Enterprise Manager works as a "Manger" of the Manager. You can register as many OVM-Managers you want and control your complete virtualization environment Create Roles and Users for your Self Service Portal in Enterprise ManagerWith this step you allow users to logon on the Enterprise Manager Self Service Portal. Users can request Virtual Machines in this portal. Setup the Cloud InfrastructureSetup the Quotas for your self service users. How many VMs can they request? How much of your resources ( cpu, memory, storage, network, etc. etc.)? Which SW components (templates, assemblys) can your self service users request? In this step, you basically set up the complete cloud infrastructure. Setup ChargebackOnce your cloud is set up, you need to configure your chargeback mechanism. The Enterprise Manager collects the resources metrics, which are used in a very deep level. Almost all collected Metrics could be used in the chargeback module. You can define chargeback plans based on configurations (charge for the amount of cpu, memory, storage is assigned to a machine, or for a specific OS which is installed) or chargeback on resource consumption (% of cpu used, storage used, etc). Or you can also define a combination of configuration and consumption chargeback plans. The chargeback module is very flexible. Here is a overview of the workflow how to handle infrastructure cloud in EM: Summary As you can see, setting up an Infrastructure Cloud Service with Oracle VM for X86 and Enterprise Manager 12c is really simple. I personally configured a complete cloud environment with three X86 servers and a small JBOD san box in less than 3 hours. There is no magic in it, it is all straightforward. Of course, you have to have some experience with Oracle VM and Enterprise Manager. Experience in setting up Linux environments helps as well. I plan to publish a technical cookbook in the next few weeks. I hope you found this post useful and will see you again here on our blog. Any hints, comments are welcome!

    Read the article

  • Oracle Solaris Remote Lab (OSRL) Fact Sheet

    - by user13333379
    The Oracle Solaris Remote Lab allows independent software vendors (ISVs) to test and qualify their applications in a self service Solaris cloud. ISVs who are Oracle Partner Network Gold members with a specialization in the Solaris knowledge zone can apply for free access in OPN. The lab offers the following features to it's users: Lifetime of project: 45 days (extensions granted on demand)  Up to 5 virtual machines in a private network  Virtual Machine technology: Solaris zones  Resources per VM processor support: SPARC or x86  OS version: OracleSolaris 11.0 4GB physical memory  4GB swap space  10GB local filesystem storage  10GB network filesystem (NFS) mounted on all virtual machines Networking configuration The only external network routes are to Partner's other Virtual Machines  No network routing to the Internet  The SMB (CIFS) sharing protocol is not available between Virtual Machines  Device Access  Applications that assume the existence of /devices will not run in a Virtual Machine  Applications that use eeprom to modify SPARC eeprom setting will not run in a Virtual Machine The following utilities do not work properly in Virtual Machines:  add_drv, disks, prtconf, prtdiag, rem_dev Access technology: Secure Global Desktop, file up and download root access within VM Available VM templates (both processor architectures) Oracle Database 11g Release 2 (11.2.0.3) for Solaris with Oracle Enterprise Manager 11g Weblogic 12c  SAMP: Apache http server, PHP, MySQL, phpadmin on all templates and images: Oracle Solaris Studio 12.3 for application development  More resources: Online application for Oracle Solaris remote Lab Developer Webinar about the Oracle Solaris Remote Lab Everything an Oracle Solaris Developer needs...

    Read the article

  • Oracle Solaris Remote Lab (OSRL) Fact Sheet

    - by user13333379
    The Oracle Solaris Remote Lab allows independent software vendors (ISVs) to test and qualify their applications in a self service Solaris cloud. ISVs who are Oracle Partner Network Gold members with a specialization in the Solaris knowledge zone can apply for free access in OPN. The lab offers the following features to it's users: Lifetime of project: 45 days (extensions granted on demand)  Up to 5 virtual machines in a private network  Virtual Machine technology: Solaris zones  Resources per VM processor support: SPARC or x86  OS version: OracleSolaris 11.0 4GB physical memory  4GB swap space  10GB local filesystem storage  10GB network filesystem (NFS) mounted on all virtual machines Networking configuration The only external network routes are to Partner's other Virtual Machines  No network routing to the Internet  The SMB (CIFS) sharing protocol is not available between Virtual Machines  Device Access  Applications that assume the existence of /devices will not run in a Virtual Machine  Applications that use eeprom to modify SPARC eeprom setting will not run in a Virtual Machine The following utilities do not work properly in Virtual Machines:  add_drv, disks, prtconf, prtdiag, rem_dev Access technology: Secure Global Desktop, file up and download root access within VM Available VM templates (both processor architectures) Oracle Database 11g Release 2 (11.2.0.3) for Solaris with Oracle Enterprise Manager 11g Weblogic 12c  SAMP: Apache http server, PHP, MySQL, phpadmin on all templates and images: Oracle Solaris Studio 12.3 for application development  More resources: Online application for Oracle Solaris remote Lab Developer Webinar about the Oracle Solaris Remote Lab Everything an Oracle Solaris Developer needs...

    Read the article

  • Synergy - easy share of keyboard and mouse between multiple computers

    Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

    Read the article

  • I loose some directories when i upgrade from Ubuntu 11.10 to 12.04

    - by maythux
    last day i upgraded my ubunut 11.10 desktop to ubuntu 12.04. I was running a KVM virtual about 7 machines and managed by virt-manage software.... anyway when i finished upgrading i found that virt-manager is not working so i have to reconfigure it again and install some other missing packages that was deleted!!!! anyway i solve this issue...then i started to restore my virtual machines i restore 2 machines without any problems the third and fourth ones (windows) make a check disk that takes more that 6 hours but finally it works... other machines i cant find their attached hard disks i don't know what happens but i cant found that files. 1- upgrading delete files!?!! 2- Is there anyway to restore those files? thanks in advance

    Read the article

  • Block a machine from accessing the internet

    - by Simon Rigby
    After some confirmation that I have thinking right in this scenario. We have a number of wired and wireless machines which presently have direct internet access. I also have a Linux (Ubuntu) server which is used as a file server for the network. Essentially I would like to be able to turn internet access on and off for machines. My plan is to block these machines by MAC address at the router. I would then set up a proxy server on the Linux box (ie Squid) so that the machines I wish to restrict can access the internet via the proxy. As I can adjust access via ACLs in squid, I would be able to switch on or off a machines access to the internet without having to further adjust the router's MAC rules. And of course I could go further and create a few scripts to assist with this admin task. Does this seem sound and have I over looked anything? Any help greatly appreciated. Simon.

    Read the article

  • Is it possible to lose some directories when upgrading from 11.10 to 12.04?

    - by maythux
    Last day I upgraded my Ubuntu 11.10 desktop to Ubuntu 12.04. I was running a KVM virtual about 7 machines and managed by virt-manage software. Anyway when I finished upgrading I found that virt-manager is not working. So I had to reconfigure it again and install some other missing packages that was deleted! Eventually, I managed to solve this issue. Then I started to restore my virtual machines. I restored 2 machines without any problems. The third and fourth ones (Windows) made a check disk that lasted more that 6 hours but finally it worked. Other machines I can't find their attached hard disks. I don't know what happened but I can't find those files. Does upgrading delete files? Is there anyway to restore those files?

    Read the article

  • How to connect the virtual networks of vmware guests running on different hosts?

    - by gyrolf
    In a test setup, we are running several virtual machines on a single vmware workstation host. All virtual machines are connected via a "host only" network. This runs fine up to 2 or 3 virtual machines (depending on the host hardware). To allow more virtual machines, we want to use more host machines. Details about the environment and applications: Host PCs are running Windows XP in a corporate intranet. VMware used is Workstation 6.5 Guests are running Windows Server 2003 All guests act as Web Servers One of the guests additionally acts as Windows File server, offering shared folders for the other guests to connect to. Restrictions: VMware guests shall not be visible from the intranet. Changes to the host PC are restricted by corporate policy. In the virtual network, no domain controller exists. All virtual machines are member of the same workgroup. Running the virtual network as NAT is possible. Port forwarding might be used if it does not conflict with ports used by the host PC. Looking for a solution, I found hints about using router or vpn software on the hosts, but without any details how to setup. (I found a similar question Sharing the network between 2 VMware hosts, but the answer was not sufficient for me.)

    Read the article

  • Windows xp mapped drives disconnect from Windows 7 on Peer to Peer network

    - by Kathryn Codo
    I have a 5 user peer to peer network. 2-XP machines, 3- Windows 7 machines and a Windows 7 machine acting as the file server. I have NO issues with the Windows 7 machines staying connected via the mapped drives to the "server". However, once a day the 2 XP machines will not connect to the Windows 7 machine "server" via the mapped drives. I must restart the "server" in order to see the server and access the files via the mapped drives or Explorer. I have tried the persistent : yes command in NET USE, on the XP machines and also setting a static IP address on the "server". I've turned the firewall off on the "server:, no difference so I turned the firewall back on. No interruption occurs with the internet when this happens, just can't see the server. Again, the Windows 7 users are unaffected. I have gone into the advanced network settings on the "server" and added read/write permissions for Everyone as well as the users of the XP machines. I have double checked that we are all on the same WORKGROUP. I'm at a loss. It seems to happen around mid-day and I've not been able to find any activity that is happening at this time (Like someone plugging in a thumbdrive). Any suggestions would be greatly appreciated as my client is running old XP software he no longer has the disks for and needs for his engineering firm.

    Read the article

  • Fast distributed filesystem for a large amounts of data with metadata in database

    - by undefined hero
    My project uses several processing machines and one storage machine. Currently storage organized with a MSSQL filetable shared folder. Every file in storage have some metadata in database. Processing machines executes tasks for which they needed files from storage and their metadata. After completing task, processing machine puts resulting data back in storage. From there its taken by another processing machine, which also generates some file and put it back in storage. And etc. Everything was fine, but as number of processing machines increases, I found myself bottlenecked myself with storage machines hard drive performance. So I want processing machines to put files in distributed FS. to lift load from storage machines, from which they can take data from each other, not only storage machine. Can You suggest a particular distributed FS which meets my needs? Or there is another way to solve this problem, without it? Amounts of data in FS in one time are like several terabytes. (storage can handle this, but processors cannot). Data consistence is critical. Read write policy is: once file is written - its constant and may be only removed, but not modified. My current platform is Windows, but I'm ready to switch it, if there is a substantially more convenient solution on another one.

    Read the article

  • How to place a virtual machine in DMZ?

    - by Giordano
    I have an Ubuntu 12.04 server running few virtual machines with KVM. I would like to expose some of these virtual machines on the internet, to make it possible for customers to test the products we're developing and make available other products for demo purposes. One of the server NICs is configured with a public IP. However before exposing anything on the web I would like to be sure that if one of the virtual machines get compromised, the attacker doesn't reach the rest of the hosts. What I would like to do is to put these virtual machines into a DMZ. These are the steps I'm planning to do: Create a tap interface in the virtualization host (let's say tap1) Create a bridge using tap1 and give it an IP in a subnet separate from the other hosts. Let's say 10.0.0.1 Attach the DMZ virtual machines to the bridge and configure their IP statically (10.0.0.2, 10.0.0.3, etc...) Using UFW, forbid any traffic from 10.0.0.0/24 to any of the internal hosts, allow the traffic from the internal hosts towards 10.0.0.0/24 and expose the virtual machines on the web using port forwarding. Do you think this setup is safe? Can you suggest any improvement or a better/safer approach? Thanks in advance!

    Read the article

  • How to connect the virtual networks of vmware guests running on different hosts?

    - by gyrolf
    In a test setup, we are running several virtual machines on a single vmware workstation host. All virtual machines are connected via a "host only" network. This runs fine up to 2 or 3 virtual machines (depending on the host hardware). To allow more virtual machines, we want to use more host machines. Details about the environment and applications: Host PCs are running Windows XP in a corporate intranet. VMware used is Workstation 6.5 Guests are running Windows Server 2003 All guests act as Web Servers One of the guests additionally acts as Windows File server, offering shared folders for the other guests to connect to. Restrictions: VMware guests shall not be visible from the intranet. Changes to the host PC are restricted by corporate policy. In the virtual network, no domain controller exists. All virtual machines are member of the same workgroup. Running the virtual network as NAT is possible. Port forwarding might be used if it does not conflict with ports used by the host PC. Looking for a solution, I found hints about using router or vpn software on the hosts, but without any details how to setup. (I found a similar question Sharing the network between 2 VMware hosts, but the answer was not sufficient for me.)

    Read the article

  • Windows 7 Sharing issue on RAID 5 Array(s)

    - by K.A.I.N
    Greetings all, I'm having a very odd error with a windows 7 ultimate x64 system. The network system setup is as follows: 2x XP Pro 32 Bit machines 1x Vista ultimate x64 machine 2x Windows 7 x64 Ultimate machines all chained into 1x 16 port netgear prosafe gigabit switch, the windows 7 & vista machines are duplexed. Also there is a router (netgear Rangemax) chained off the switch I am basically using one of the windows 7 machines to host storage & stream media to other machines. To this end i have put 2x 3tb hardware RAID 5 arrays in it and assorted other spare disks which i have shared the roots of. The unusual problems start when i am getting Access denied, Please contact administrator for permission blah blah blah when trying to access both of the RAID 5 arrays but not the other stand alones. I have checked the permission settings, i have added everyone to the read permission for the root, i have tried moving things into sub directories then sharing them. I have tried various setting combinations in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa and always the same. I have tried flushing caches all round, disabling and re-enabling shares & sharing after restart as well as several other things & the result is always the same... No problem on individual drives but access denied on both the RAID arrays from both XP & Vista & Windows 7 machines. One interesting quirk that may lead to an answer is that there is no "offline status" information regarding the folders when you select the RAID 5s from a windows 7 machine yet there is on the normal drives which say they are online. It is as if the raid is present but turned off or spun down but as far as i was aware windows will spin an array back up on network request and on the machine itself the drives seem to be online and can be accessed. Have to admit this has me stumped. Any suggestions anyone? Thanks in advance for any fellow geek assistance. K.A.I.N

    Read the article

  • ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

    - by xyious
    I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

    Read the article

  • Network error during uninstallation

    - by varunp88
    Hi, We are using WiX to create a setup. The installation works fine, but during uninstallation an error says that the [FileName].msi is missing in C:\Windows\Installer and the setup starts rolling back. It is not reproduced in all the machines. It happens only in few machines. Could someone please give a solution to this ? What may be the reason that this happens only in 5 machines out of some 100 machines ? Thanks and Regards, Varun

    Read the article

  • Outlook Anywhere inconsistencies with authentication methods

    - by gravyface
    So I've read this question and attempted just about every other workaround I've found online. Problem seems completely illogical to me, anyways: SBS 2011, vanilla install; haven't touched anything in IIS or Exchange outside of what's been done through the checklist (brand new domain, completely new customer) except to import an existing wildcard certificate for *.example.com (which is valid, Remote Web Workplace and Outlook Web Access work fine). On the two test machines and one production machine running a mixture of Windows XP Pro, Windows 7 and Outlook 2003 through to 2010, I've had no problem saving the password after configuring Outlook Anywhere using the wrong authentication method. I repeat, I have had no issues using the wrong authentication method on these test machines; password saves the first time, no problem, can verify it exists in the credentials manager (Start Run control userpasswords2), close Outlook, reboot, go make a sammie, come back, credentials are still saved. When I say wrong, it's because I was choosing NTLM and Exchange (under Exchange Console Server Configuration Client Access) was set by default to use Basic. On two completely different machines setup by a co-worker, they had (under my guidance) used NTLM as well... except that frustratingly, Outlook would always ask for a password. One machine was Windows XP with Outlook 2010, the other was Windows 7 with Outlook 2003. When these two machines were set to use Basic -- the correct settings -- the option to save was there and now works without issue. Puzzled by how my machines could possibly work with the wrong authentication, I then went into one of them and changed the authentication method to Basic. Now here's where it gets a little crazy: if I go under Outlook and change the authentication to use the correct setting (Basic) it fails to save the password and Outlook prompts every time (without a "remember me" checkbox). I have not had a chance to change it to Basic on the other two machines to see if this is just a fluke or not, but something just isn't right here. My two hunches are either a missing/installed KB Update or perhaps a local security policy. I should add that none of the 5 test machines in the equation here have ever been joined to the domain.

    Read the article

  • VirtualBox 3.2 is released! A Red Letter Day?

    - by Fat Bloke
    Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

    Read the article

  • Hyper-V for Developers Part 1 Internal Networks

    Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Sync video play over network

    - by Nemesis
    Hi, I have made a media player that plays basically anything that's scheduled to it via a text file. The player can also play the exact same clip on multiple machines(PC's). The problem is the syncing. The same video starts playing on each of the machines, but they are out by about 400ms, which looks crap and if there's sound it's even worse. What I do at the moment is: One machine is set up as the master and all other machines are set up as slaves. The master decides what item will be played. It waits for a message from each of the slaves, once all slaves are connected (or after the timeout), it broadcasts the item id of the file that needs to be played. All machines then start playing that file. What I also tried: I thought that the file loading time might be the major driving factor in the sync mismatch, so I chankged the code to do the following. The master still decides what file to play. It waits for the connect message from each slave (or timeout) and transmits the item id of the file to play. All machines start playing that file but pauses it immediately. The master then again waits for a ready message from each of the slaves. As soon as all slaves responded the master sends a play message to all slaves. All machines then continue the file. This unfortunately did not improve the problem. I am now pretty sure the sync mismatch is due to network delay. How can I compensate for this? Or maybe determine the delay to each slave? All network comms are done with winsock. Any thoughts or ideas is much appreciated.

    Read the article

  • Zenoss Setup for Windows Servers

    - by Jay Fox
    Recently I was saddled with standing up Zenoss for our enterprise.  We're running about 1200 servers, so manually touching each box was not an option.  We use LANDesk for a lot of automated installs and patching - more about that later.The steps below may not necessarily have to be completed in this order - it's just the way I did it.STEP ONE:Setup a standard AD user.  We want to do this so there's minimal security exposure.  Call the account what ever you want "domain/zenoss" for our examples.***********************************************************STEP TWO:Make the following local groups accessible by your zenoss account.Distributed COM UsersPerformance Monitor UsersEvent Log Readers (which doesn't exist on pre-2008 machines)Here's the Powershell script I used to setup access to these local groups:# Created to add Active Directory account to local groups# Must be run from elevated prompt, with permissions on the remote machine(s).# Create txt file should contain the names of the machines that need the account added, one per line.# Script will process machines line by line.foreach($i in (gc c:\tmp\computers.txt)){# Add the user to the first group$objUser=[ADSI]("WinNT://domain/zenoss")$objGroup=[ADSI]("WinNT://$i/Distributed COM Users")$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)# Add the user to the second group$objUser=[ADSI]("WinNT://domain/zenoss")$objGroup=[ADSI]("WinNT://$i/Performance Monitor Users")$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)# Add the user to the third group - Group doesn't exist on < Server 2008#$objUser=[ADSI]("WinNT://domain/zenoss")#$objGroup=[ADSI]("WinNT://$i/Event Log Readers")#$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)}**********************************************************STEP THREE:Setup security on the machines namespace so our domain/zenoss account can access itThe default namespace for zenoss is:  root/cimv2Here's the Powershell script:#Grant account defined below (line 11) access to WMI Namespace#Has to be run as account with permissions on remote machinefunction get-sid{Param ($DSIdentity)$ID = new-object System.Security.Principal.NTAccount($DSIdentity)return $ID.Translate( [System.Security.Principal.SecurityIdentifier] ).toString()}$sid = get-sid "domain\zenoss"$SDDL = "A;;CCWP;;;$sid" $DCOMSDDL = "A;;CCDCRP;;;$sid"$computers = Get-Content "c:\tmp\computers.txt"foreach ($strcomputer in $computers){    $Reg = [WMIClass]"\\$strcomputer\root\default:StdRegProv"    $DCOM = $Reg.GetBinaryValue(2147483650,"software\microsoft\ole","MachineLaunchRestriction").uValue    $security = Get-WmiObject -ComputerName $strcomputer -Namespace root/cimv2 -Class __SystemSecurity    $converter = new-object system.management.ManagementClass Win32_SecurityDescriptorHelper    $binarySD = @($null)    $result = $security.PsBase.InvokeMethod("GetSD",$binarySD)    $outsddl = $converter.BinarySDToSDDL($binarySD[0])    $outDCOMSDDL = $converter.BinarySDToSDDL($DCOM)    $newSDDL = $outsddl.SDDL += "(" + $SDDL + ")"    $newDCOMSDDL = $outDCOMSDDL.SDDL += "(" + $DCOMSDDL + ")"    $WMIbinarySD = $converter.SDDLToBinarySD($newSDDL)    $WMIconvertedPermissions = ,$WMIbinarySD.BinarySD    $DCOMbinarySD = $converter.SDDLToBinarySD($newDCOMSDDL)    $DCOMconvertedPermissions = ,$DCOMbinarySD.BinarySD    $result = $security.PsBase.InvokeMethod("SetSD",$WMIconvertedPermissions)     $result = $Reg.SetBinaryValue(2147483650,"software\microsoft\ole","MachineLaunchRestriction", $DCOMbinarySD.binarySD)}***********************************************************STEP FOUR:Get the SID for our zenoss account.Powershell#Provide AD User get SID$objUser = New-Object System.Security.Principal.NTAccount("domain", "zenoss") $strSID = $objUser.Translate([System.Security.Principal.SecurityIdentifier]) $strSID.Value******************************************************************STEP FIVE:Modify the Service Control Manager to allow access to the zenoss AD account.This command can be run from an elevated command line, or through Powershellsc sdset scmanager "D:(A;;CC;;;AU)(A;;CCLCRPRC;;;IU)(A;;CCLCRPRC;;;SU)(A;;CCLCRPWPRC;;;SY)(A;;KA;;;BA)(A;;CCLCRPRC;;;PUT_YOUR_SID_HERE_FROM STEP_FOUR)S:(AU;FA;KA;;;WD)(AU;OIIOFA;GA;;;WD)"******************************************************************In step two the script plows through a txt file that processes each computer listed on each line.  For the other scripts I ran them on each machine using LANDesk.  You can probably edit those scripts to process a text file as well.That's what got me off the ground monitoring the machines using Zenoss.  Hopefully this is helpful for you.  Watch the line breaks when copy the scripts.

    Read the article

  • I have to shard a mysql database. I want to start with 12 shards on 2 machines. What is the best w

    - by Tim
    All tables are InnoDb. I would rather not use mysqldump, because the shard sizes will be about 200 GB (about 700 million rows), and that will take too long. I was hoping to just stop mysql for an hour, copy the data files to a new machine, and start back up. But you can't do this with InnoDb, as some data is in the shared tablespace. Even if I have the innodb_file_per_table option set. This is not a website, but a custom application, used by tens of thousands right now, so uptime and performance are important. I suppose I could add logic into my server application to allow for gradual rebalancing / moving of a shard. Does anyone have a better idea?

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >