Search Results

Search found 4435 results on 178 pages for 'matt dell'.

Page 27/178 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• "HDA audio bus driver is required and not found" on Dell Optiplex

  - by user1666698

  I have Dell Optiplex 745 with Windows 7 installed on it. I'm trying to use the Windows XP audio driver as Windows 7 drivers aren't available for Optiplex 745 and Windows Vista driver is displaying that it's not compatible with my hardware. When I try to install the Windows XP audio driver, it's displaying an error HDA audio bus driver is required and not found The installation fails then. I have researched thourghly and used many drivers but my audio is not working at all. I was also told that it might be a problem with my hardware – that is, a problem with the board.

  Read the article

• Dell XT on Windows 7 never recovers from sleep

  - by user39408

  My Dell XT, after upgrade to windows 7 ultimate seems to never recover from a sleep i.e. opening the lid shows a flicker, and then all lights go off. When I press the power button long enough it reboots and says that Windows had a serious error, blah blah (but no BSOD). Hibernate doesnt cause any problem, and that is what I am doing as default. Any idea how to debug more and fix it. Looked around (on web) for answer, tried related solutions (hotfixes for similar but not same problems) etc, but noting fixes this.

  Read the article

• Dell Inspiron 530 - SSD Worth it?

  - by DrFredEdison

  I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

  Read the article

• DELL U2410 Monitor(Display Port) & Graphic card

  - by Anj

  I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

  Read the article

• Dell monitors keep blank after initial start

  - by offler

  We have Dell T1650 PCs with 2 nVidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectedly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• dell E6500 laptop will not hibernate/standby

  - by Mark Schultheiss

  I am using a Dell E6500 laptop with windows XP on it, it was originally tagged/installed with Windows Vista. My issue is, when I close the lid, it will not either Hibernate or Standby. If I close the lid with either of these options, I then have to startup from scratch, and anything I had open is not open. I just want to close the lid, have it keep what I have running, not use power util I open the lid again and start it up (with the stuff still open I had open of course). Suggestions?

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• Xenserver 5.5 doesn't see RAID volume

  - by Roy Chan

  Hi Gurus, I am trying to install Xenserver on a Dell precision 490 workstation. After booting into the install wizard and next-ed a few times, On the disk step, it only shows physical harddrive but not the RAID (RAID-10) volume that I set up on the Dell RAID. Is there a special option that I have to set on the boot? or do I need a special driver for this? Please Advise Thanks

  Read the article

• configuring a Fibre Channel switch

  - by lindenb

  Hi all, (I'm asking this for a friend and I'm don't know most of this technical stuff, so I'm sorry in advance if I'm not clear enough to describe the problem) Where can i find any information about how to configure a Fibre Channel switch ( QLocic , Mini GBic, QME2572 ) to make it communicate with a Dell R905 and a Dell M905 Blade Server ? Many thanks in advance Pierre

  Read the article

• RAM upgrade, what options are suitable?

  - by user55150

  I have a Dell GX520 optiplex model (mini tower), and I want to upgrade its RAM. I currently have 1GB RAM and I want to upgrade to 2GB. All I know about RAM is its capacity, and I've heard about speeds lately like 400mhz, 533mhz, 800mhz, 1333mhz. I want to know what are the differences among them and can my PC support all those types of speeds or not? And what is the most suitable one for my Dell PC, to avoid any problems or limitations.

  Read the article

• Problem with switch dell 6224

  - by Matias

  Hello, we just have upgraded the firmware of a dell 6224 power connect switch and it won't reload. These are the symptons: - I power up the switch having the serial cable connected to it and the switch outputs nothing. The configuration of the serial console is fine: 9600 bds, etc... In fact, before the upgrade, I was connected to the switch through the very same cable. - Reseting the switch with its reset pinhole does not reset the switch: the power and fan lights powers off while I keep pressed the pinhole, but the switch itself does not resets. - When I connect an UTP cable to one of the switches port, the green lights don't flash, but ''mii-tool eth0'' in my laptop shows there is link!! The only thing I see in the output, different from other upgrades I've done, is this line at the end: Erasing Boot Flash.....^^^^Done. Any help or idea will be more than welcome!! Thanks!! console#show version Image Descriptions image1 : image2 : Images currently available on Flash -------------------------------------------------------------------- unit image1 image2 current-active next-active 1 <none> 3.0.0.8 image2 image2 console#boot system image2 Activating image image2 .. console#update bootcode Update bootcode and reset (Y/N)? Updating boot code ... Extracting boot code from image... Erasing Boot Flash.....^^^^Done.

  Read the article

• Rebinding Keys on a Dell Keyboard

  - by Maarx

  I have a Dell Multimedia Keyboard, similar to this one: It has many non-standard keys, like the small circular ones across the top, and the "Multimedia" keys above INSERT/HOME/PAGE_UP. They can be rebound through simple registry entries. Some sample ones are included below: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\15] "ShellExecute"="C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe http://mail.google.com/mail/#inbox" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\16] "Association"=".cda" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17] "ShellExecute"="C:\\Windows\\System32\\SnippingTool.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18] "ShellExecute"="calc.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7] "Association"="http" I've rebound the "MAIL" key to, instead of booting Outlook, to booting Firefox directed at my G-Mail account. I've rebound the button that would normally open "MY COMPUTER" to instead boot the Windows 7 "Snipping Tool", something I find very useful. Now, I'm looking to do some other things that I don't already know how to do. Note that answering this question doesn't necessarily require any knowledge about the keyboard or rebinding the keys: I can add, for any given key, a "ShellExecute" entry, and it will simply execute the following command as if it was typed at a Command Prompt. (I'm aware I dumbed that down rather significantly, but bear with me. I'm not really a Windows guy myself.) I use the volume knob for it's intended purpose, to change volume. I would like to change, however, a different key, to "reset" the Windows volume level back to exactly 50%, or, as it refers to it, "50", on it's 0-100 scale. I'm looking for the "program" (what I would type at a command prompt? these are still just Sys32 programs in the PATH, aren't they?) that, I imagine, would take arguments, to change Sound/Volume settings under Windows 7. Perhaps, for clarification, something that might take the form "C: SetVolume -slevel 50" or something.

  Read the article

• Firefox crash on first load on Ubuntu Linux on older Dell Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

  Read the article

• Ruckus wireless AP and Dell PowerConnect configuration problems

  - by DanielJay

  We are working on trying to get some Ruckus Access Points to work correctly on our network. Currently our network is as follows: VLAN 10 - Servers VLAN 11 – Computers/DHCP VLAN 12 – Voice VLAN 13 – Guest We use Dell PowerConnect 6248P switches for our switches. Port settings are as follows: ZoneDirector 1100 is plugged into this port. Should be accessing the server VLAN and then allowing all other traffic. interface ethernet 1/g2 classofservice trust ip-dscp description 'Ruckus ZoneDirector 1100' switchport mode general switchport general pvid 10 switchport general allowed vlan add 10 switchport general allowed vlan add 11-13 tagged exit Access point is plugged into this port. The port has to be on VLAN 11 in order to get DHCP. interface ethernet 1/g16 classofservice trust ip-dscp description 'Ruckus - IT' switchport mode general switchport general pvid 11 switchport general allowed vlan add 10-12 switchport general allowed vlan add 13 tagged exit If we tag the traffic from the SSID as VLAN 11 data fails. If we leave the SSID tagged as 1 the data flows correctly. Are there problems with passing tagged traffic to untagged ports? We are looking to see what we can do to get the SSID tagged as 11 instead of 1. Any suggestions?

  Read the article

• Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

  - by MadBoy

  I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

  Read the article

• Dell PS/2 Keyboard Stops Working Randomly After Power Disturbance

  - by Kenneth Murphy

  I have a Dell PS/2 keyboard connected to a desktop PC running Slackware 12.2 & Windows XP. After a recent, brief power outage/disturbance at my home, the keyboard has begun to quit working at random times. It has stopped at POST, but not by keyboard error -- I have to press the F1 key to continue booting, and at times the keyboard has already stopped working. Other times, the keyboard will work perfectly for a long time (a day or more) before it finally quits. It has stopped at boot, in Windows XP, and in Slackware. The led lights continue to work regardless. I have tried another PS/2 keyboard and it seems to be immune to this problem. The USB mouse always works. Does anyone have any ideas about how this might have happened? If this is related to the power disturbance that killed the power to the running PC, is it feasible that it would have only fried the keyboard itself (which still works sometimes) and not the PS/2 port nor anything else? I have experienced no other problems since the event.

  Read the article

• Application (was Firefox) crash on first load on Ubuntu Linux on older Dell Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then (WAS: everything stops: icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. EDIT : on further investigation, spinning icon, mouse operated by touchpad freeze. There's apparantly a little disk activity occuring about every 5 seconds. I wait 5-10 minutes, behavior doesn't change) A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in). EDIT: I tried to run the Disk manager tool, not that I cared what it was, just a menu-available application. It started up like Firefox, I get a little tag in the lower left saying Disk P*** something had started, and then the same behavior as Firefox. At this point, I don't think its the Ethernet. Is it possible that the Ubuntu disk driver can't handle the disk controller in this older laptop? The install seemed to go fine.

  Read the article

• What are the most important aspects to consider when choosing a SAN for a small office virtualizatio

  - by Prof. Moriarty

  I am in the process of consolidating 6 physical servers running 6 different operating system flavors (don't ask) into two identical physical servers (Dell PowerEdge 2900), using the free VMware ESXi 4.0 platform. We will install an iSCSI SAN over a 1GbE network, and store all virtual machine images on the SAN. Each physical server would run 3 VMs, and in the case of a physical server failure, we would manually switch over the other 3. These are all internal servers, while important, they can tolerate some amount of downtime (say <1h) to keep cost and complexity associated with HA down. I now need to choose the SAN to be used for the setup, on a low budget. We currently have about 2TB of data, but of course I want to able to grow, do backups of VM snapshots on other drives and remove them to a different location, etc. So what I would like to know is: Which are the must have features for this setup, without which using a SAN is not worth it? We are mostly a Dell shop, so I have been looking at the EqualLogic PS4000E High Availability model. Any opinions, anecdotes, bad experiences with this model? (This is one of the few models which could accomodate our existing disks from the physical servers.) If you can recommend something that is not Dell, but it has better value, I would most definitely consider it. Caveats, things to look out for?

  Read the article

• Is this DVD drive broken? Brand new, i need help convincing

  - by acidzombie24

  I am asking bc i know dell is going to give me a problem. How do i know if my DVD is broken on my laptop? i burnt 4 DL disc and they ALL failed, i called and dell suggested roxio. I used it and burnt 1 disc without error and the 2nd disc with an error. With both apps there were no 'problems' during the burning process only failed on the verification process. Some of these bad disc dont work on other PCs and one locks up windows when i click a specific file. Does that sound like a broken burner to you guys? when i called dell they told me since it can read disc properly 100% of the time and software doesnt fail in the burning process its not a broken drive _. They forward me to software support who demand a fee (i think $100) to help me fix my software. I am annoyed bc i dont want to be on the phone for them to watch me burn a dvd and since i burned it once correctly i dont want to happen to burn correctly again to have them say they solved my problem (doing nothing) and charge me refusing to refund. -edit- The errors i got were 1) the request could not be performed because of an I/O device error 2) Windows locking up when opening 1 specific file 3) Cannot copy : Data error (crc) NOTE: the file that causes the problems are random every disc

  Read the article

• ESX3.5 Cluster & MD3000i -- Both servers see iSCSI Targets, Only one server can use partition.

  - by GruffTech

  Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've tried. I've included several images of our setup and the problem it is having.. TLDR Version: So I've followed the guides located here: ESX Deployment Guide V1 this is the guide Dell has sent me to setup two ESX3.5 servers mounting a Dell MD3000i. It doesn't work. Both servers can't use the same storage partition on the MD3000. Both servers see it, but only one server can actually use it. (that server being whatever server created the partition on the target.) Both ESX servers are members of the Host Group. Full Version I have 2 ESX3.5 Servers (10.0.7.102, also called EPI2, and 10.0.7.103, also called EPI3.) connected to a iSCSI SAN Device (Dell MD3000i). Both ESX servers can "scan" the SAN and see the LUNS. Part One: MD3000i Storage On the MD3000i, Both servers are in my host group. I have two partitions, VM1 and VM2, both 1.6TB (vmware doesn't like anything past 2tb.) And you can even see that the ESX servers are targetting the MD3000 just fine. Part Two: The ESX Servers Figure 1. So as you can see above, Both ESX Servers (10.0.7.102 and 10.0.7.103) are able to see and scan the MD3000i SAN. Figure 2. Above is the storage both servers see. I created the storage partition on EPI2 (102). I then Extended the partition to include the second LUN for a grand total of 3.27 TB of storage. When i "rescan" on 103 (the server not mounting the partition), I get the below log in log/messages. Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). being the only line that grabs my attentions. (EPI3 is the server name) Mar 11 10:41:04 epi3 vmkiscsid[5436]: Connected to Discovery Address 192.168.130.101 Mar 11 10:41:04 epi3 vmkiscsid[5437]: Connected to Discovery Address 192.168.130.102 Mar 11 10:41:04 epi3 vmkiscsid[5438]: Connected to Discovery Address 192.168.131.101 Mar 11 10:41:04 epi3 vmkiscsid[5439]: Connected to Discovery Address 192.168.131.102 Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 0 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Device id info for sdb: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0xa2 0x0 0x0 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Id for sdb 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0xa2 0x00 0x00 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:17 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: scan_scsis starting finish Mar 11 10:41:17 epi3 kernel: SCSI device sdb: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:17 epi3 kernel: sdb: sdb1 Mar 11 10:41:17 epi3 kernel: scan_scsis done with finish Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 1 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdc : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Device id info for sdc: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0x86 0x0 0x0 0xd 0xb7 0x4d 0x75 0xf2 0x77 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Id for sdc 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0x86 0x00 0x00 0x0d 0xb7 0x4d 0x75 0xf2 0x77 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:18 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: scan_scsis starting finish Mar 11 10:41:18 epi3 kernel: SCSI device sdc: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:18 epi3 kernel: sdc: sdc1 Mar 11 10:41:18 epi3 kernel: scan_scsis done with finish Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). Mar 11 10:41:18 epi3 kernel: scsi singledevice 1 0 0 0 Things I've Tried: Removing iSCSI targets from only 103, disabling iSCSI, rebooting, enabled iSCSI, re-adding targets, rescan. Same result. Removing partition on 102, Formatted partition on 103 instead. Same result, except flipped. 103 can use storage, 102 can not. Starting Over. Removing all iSCSI Targets on both ESX Boxes, disabling iSCSI, turning off the firewall for iSCSI, rebooting ESX. Then on the MD3000, Removed the Host Group, Removed the Host-to-Virtual Mappings, Restarted the SAN. Followed the Documentation again, same result. Both servers see the storage, but only one server can use it. Disabling and Re-enabling VMware DRS and HA. Same result. Flat-out turning off VMware DRS and HA, and doing the "start over" step to see if maybe that borked it. Same Result. I'm kinda loosing my mind here, Everything i read online says "just partition it and if the ESX boxes can see the targets, it just works".... well crap. Any ideas, any other things to try? Can anyone atleast point me in the right direction? I'm really tired of working from 1am til 4am (our maintenance hours)

  Read the article

• Why does Ubuntu reset brightness settings at the loading screen?

  - by leugim

  Since I first installed Ubuntu 11.10, I noticed that volume and screen brightness get reset every time Ubuntu starts. Why is this so? And what ways are there to keep brightness and volume levels after rebooting? I have found some scripts that change the screen-brightness at login. But this is not a good solution since login is slower because it seems to wait until the screen brightness is at the level specified by the script. After entering the password I see the screen brightness go down gradually. Only after this is complete (~1 or 2 seconds) does the background disappear and Unity come up. The screenbrightness is not remembered but instead redefined at login. So it gets remembered for the first part of the boot, then set to MAX and then again re-set to normal value by the script. My boot process is as follows: desired brightness: 2 (13,33%) / Max brightness: 15 (100%) Bios / brightness: OK GRUB (violet background color, white text) / brightness: OK Ubuntu loading screen with the dots / brightness: MAX (win7 loads with OK-brightness) User Login / brightness: MAX Unity starts / brightness: OK It seems to be more like a temporary patch than a actual solution. I'm looking for solutions that set the desired brightness permanently and consistently throughout the whole boot-process After updating to 12.04 the behavior is the same. I tried setpci -s 02:00.0 F4.B=XX The value of F4.B is always '0' regardless of what value I try to set it to (tried 0, ff, f, 5, etc) The solution in this answer does not have any noticeable effect: Desktop doesn't remember brightness settings after a reboot The variables at /sys/class/backlight/acpi_video0/ get changed if I use Fn+UP and Fn+DOWN Any help is appreciated. Thanks!

  Read the article

• how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

  - by Ayesha Ahmad

  i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

  Read the article

• How to fix v4l2 Input/output error, vostro 1510 ubuntu 13.04 64bits?

  - by Fabio C. Barrionuevo da Luz

  I clean install upgrade to ubuntu 13.04 64btis, but the cheese and simplecv are no longer functioning properly. In previous versions of Ubuntu, everything worked normally. By running the two programs, I get the following message: libv4l2: error turning on stream: Input/output error ps: sorry, my English is very ugly. full hardware description of my notebook on this link: https://gist.github.com/luzfcb/5873728

  Read the article

• Touchpad two finger sensivity problem

  - by sagarchalise

  Having asked about touchpad not only once but twice. I have again come back to same topic :D. Basically I have a working two finger scrolling after adding the following line in /etc/profile after I enabled two finger scrolling in touchpad section of mouse. xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Pressure" 32 40 But my touchpad sensitivity quite irritates me as it jumps around sometimes and also behaves scrolling as well as right click on single finger sometimes. Anyone can suggest me any tips to minimize this if not avoid ? Anyone know if I could use pinch zoom(Finally got the right term:)) as my touchpad says it supports such activity as well? Thanks in advance.

  Read the article

• Can't get Broadcom 43142 drivers to work after installation on 5420 Inspiron

  - by beckett

  I'm a complete newbie to ubuntu, I've already installed and reinstalled the Broadcom driver required done a numerous amount of steps on terminal but I can't seem to get wireless working. However, my wired connection seems to work just fine. also I have tried to follow the instructions but get stuck at step number 2 when i get told "No package dpkg is available": 1) Download the file from the link 2) sudo yum install dpkg 3) mkdir BCM43142 4) dpkg-deb -x Downloads/wireless-bcm43142-dkms-6.20.55.19_amd64.deb BCM43142 5) cd BCM43142/usr/src/wireless-bcm43142-oneiric-dkms-6.20.55.19~bdcom0602.0400.1000.0400/src/wl/sys 6) sudo yum install kernel-devel kernel-headers 7) vi wl_linux.c 8) around line 43, remove the line include 9) save the file (:wq) 10) cd ../../.. 11) make Things should work, and you'll have a file called "wl.ko" in the current directory. 12) sudo yum remove broadcom-wl 13) sudo mkdir -p /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 14) sudo cp wl.ko /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 15) sudo depmod -a 16) sudo modprobe wl I really need help :/

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >