Search Results

Search found 1192 results on 48 pages for 'raviraj peerbits ii'.

Page 27/48 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • Mulit-tenant ASP.NET MVC – Controllers

    - by zowens
    Part I – Introduction Part II – Foundation   The time has come to talk about controllers in a multi-tenant ASP.NET MVC architecture. This is actually the most critical design decision you will make when dealing with multi-tenancy with MVC. In my design, I took into account the design goals I mentioned in the introduction about inversion of control and what a tenant is to my design. Be aware that this is only one way to achieve multi-tenant controllers.   The Premise MvcEx (which is a sample written by Rob Ashton) utilizes dynamic controllers. Essentially a controller is “dynamic” in that multiple action results can be placed in different “controllers” with the same name. This approach is a bit too complicated for my design. I wanted to stick with plain old inheritance when dealing with controllers. The basic premise of my controller design is that my main host defines a set of universal controllers. It is the responsibility of the tenant to decide if the tenant would like to utilize these core controllers. This can be done either by straight usage of the controller or inheritance for extension of the functionality defined by the controller. The controller is resolved by a StructureMap container that is attached to the tenant, as discussed in Part II.   Controller Resolution I have been thinking about two different ways to resolve controllers with StructureMap. One way is to use named instances. This is a really easy way to simply pull the controller right out of the container without a lot of fuss. I ultimately chose not to use this approach. The reason for this decision is to ensure that the controllers are named properly. If a controller has a different named instance that the controller type, then the resolution has a significant disconnect and there are no guarantees. The final approach, the one utilized by the sample, is to simply pull all controller types and correlate the type with a controller name. This has a bit of a application start performance disadvantage, but is significantly more approachable for maintainability. For example, if I wanted to go back and add a “ControllerName” attribute, I would just have to change the ControllerFactory to suit my needs.   The Code The container factory that I have built is actually pretty simple. That’s really all we need. The most significant method is the GetControllersFor method. This method makes the model from the Container and determines all the concrete types for IController.  The thing you might notice is that this doesn’t depend on tenants, but rather containers. You could easily use this controller factory for an application that doesn’t utilize multi-tenancy. public class ContainerControllerFactory : IControllerFactory { private readonly ThreadSafeDictionary<IContainer, IDictionary<string, Type>> typeCache; public ContainerControllerFactory(IContainerResolver resolver) { Ensure.Argument.NotNull(resolver, "resolver"); this.ContainerResolver = resolver; this.typeCache = new ThreadSafeDictionary<IContainer, IDictionary<string, Type>>(); } public IContainerResolver ContainerResolver { get; private set; } public virtual IController CreateController(RequestContext requestContext, string controllerName) { var controllerType = this.GetControllerType(requestContext, controllerName); if (controllerType == null) return null; var controller = this.ContainerResolver.Resolve(requestContext).GetInstance(controllerType) as IController; // ensure the action invoker is a ContainerControllerActionInvoker if (controller != null && controller is Controller && !((controller as Controller).ActionInvoker is ContainerControllerActionInvoker)) (controller as Controller).ActionInvoker = new ContainerControllerActionInvoker(this.ContainerResolver); return controller; } public void ReleaseController(IController controller) { if (controller != null && controller is IDisposable) ((IDisposable)controller).Dispose(); } internal static IEnumerable<Type> GetControllersFor(IContainer container) { Ensure.Argument.NotNull(container); return container.Model.InstancesOf<IController>().Select(x => x.ConcreteType).Distinct(); } protected virtual Type GetControllerType(RequestContext requestContext, string controllerName) { Ensure.Argument.NotNull(requestContext, "requestContext"); Ensure.Argument.NotNullOrEmpty(controllerName, "controllerName"); var container = this.ContainerResolver.Resolve(requestContext); var typeDictionary = this.typeCache.GetOrAdd(container, () => GetControllersFor(container).ToDictionary(x => ControllerFriendlyName(x.Name))); Type found = null; if (typeDictionary.TryGetValue(ControllerFriendlyName(controllerName), out found)) return found; return null; } private static string ControllerFriendlyName(string value) { return (value ?? string.Empty).ToLowerInvariant().Without("controller"); } } One thing to note about my implementation is that we do not use namespaces that can be utilized in the default ASP.NET MVC controller factory. This is something that I don’t use and have no desire to implement and test. The reason I am not using namespaces in this situation is because each tenant has its own namespaces and the routing would not make sense in this case.   Because we are using IoC, dependencies are automatically injected into the constructor. For example, a tenant container could implement it’s own IRepository and a controller could be defined in the “main” project. The IRepository from the tenant would be injected into the main project’s controller. This is quite a useful feature.   Again, the source code is on GitHub here.   Up Next Up next is the view resolution. This is a complicated issue, so be prepared. I hope that you have found this series useful. If you have any questions about my implementation so far, send me an email or DM me on Twitter. I have had a lot of great conversations about multi-tenancy so far and I greatly appreciate the feedback!

    Read the article

  • I&rsquo;m sorry RPGs, it&rsquo;s not you, it&rsquo;s me: The birth of my game idea

    - by George Clingerman
    One of the things I’ve had to give up in order to have some development time at night is gaming. It’s something I refused to admit for years but I’ve just had to face the facts. I’m no longer a gamer. I just don’t have hours and hours of free time to pour into gaming and when I do have hours and hours of free time I want to pour them into game development. That doesn’t mean I don’t game at all! I play games pretty much every day. It just means I’ve moved more into the casual game realm. It’s all I have time for when juggling priorities in my life. That means that games like Gears of War 2 sit shrink wrapped on my shelf and although I popped Dragon Age into my Xbox 360 one time, I barely made it through the opening sequence and haven’t had time to sit down and play again. Instead I’m playing short games like Jamestown, Atom Zombie Smasher, Fortix or if I have time to jump in and play a few rounds maybe some Monday Night Combat or Team Fortress 2. These are games I can instantly get into and play for just a short period of time and then walk away. Breath of Death VII saved my life: Back in the day (way, way back in the day) I used to be a pretty big RPG fan. Not big by a lot of RPG gamers' standards (most of the RPGs RPG fans about I’ve never heard of) but I used to LOVE to play them on the NES, SNES and Genesis and considered that my genre. Final Fantasy, Shining in the Darkness, Bard’s Tale, Faxanadu, Shadowrun, Ultima, Dragon Warrior, Chrono Trigger, Phantasy Star, Shining Force and well the list could go on but those are the ones I remember off the top of my head. I loved playing RPGs and they were my games of choice. After my first son was born (this was just about 12 years ago), I tried to continue playing RPGs and purchased games like Baldur’s Gate I & II, Neverwinter Nights, Fable, then a few of the Final Fantasy’s then Kingdom Hearts. I kept buying these games and then only playing for about fifteen minutes and never getting back to them. I still loved RPGs but they just no longer fit into my life (I still haven’t accepted that since I still purchased Dragon Age II for some reason and convinced myself I’d find the time). Adding three more sons to the mix (that’s 4 total) didn’t help much to finding more RPG time (except for Breath of Death VII and other XBLIG RPG titles, thanks guys!) All work and no RPG: A few months ago as I was sitting thinking about the lack of RPGs in my life and talking to my wife about why I wish RPGs were different and easier for a dad like me to get into. She seemed like she was listening, so I started listing all the things that made them impossible for me to play. Here’s a short list I came up with. They take 15 billion hours to complete I have a few minutes at a time I can grab to play them if I want to have time to code. At that rate it would take me 9 trillion years to beat just one RPG. There’s such long spans of times between when I can play them I forget what I was even doing so I have to spend most of the playtime I have just figuring that out and then my play time is over. Repeat. I’ll never finish one and since it takes so long to get to the fun part in an RPG, I’m never having fun. RPGs aren’t fun if you don’t have hours to play them at a time. As you can see based on my science and math, RPGs aren’t fun for me any more. From there my brain started toying around with ideas of RPGs that would work for me. They would have to be a short RPG, you know one you could beat in a single play session. A dad sized play session. I started thinking, wouldn’t it be awesome if there was a fifteen minute RPG? That got me laughing and I took that as a good sign that it sounded fun and so I thought about it a little more. I immediately discarded the idea of doing a real RPG. I’m sure a short RPG like that could be done but it wasn’t the vibe that I had in my head. No this was going to be something that just had the core essence of an RPG. In reality what I’d be making would be more of an arcade style game. One with high scores and lots of crazy action on the screen. And that’s when it hit me. It would be a speed run RPG. That’s the basics of the game I’m working on.   The Elevator Pitch: It’s a 2D top down RPG themed arcade game focused on speed. It sounds like an RPG, smells like an RPG but it’s merely emulating an RPG. The game is focused on fun and mayhem in RPG form with players leveling up in seconds instead of hours and rushing to finish quests as quickly as possible because they’ve only got fifteen minutes before EVIL overtakes the world. If the player takes longer than fifteen minutes, it’s game over man. One to four player co-operative play to really see just how fast players can level up and beat the game. Gamers will compete on leaderboards for bragging rights for fastest 1, 2, 3, and 4 player speed runs, lowest leveled characters to beat the game, highest leveled characters to beat the game and so on. Times will be tracked for everything from how long a player sat distributing stats, equipping items, talking to NPCs to running around the level. These stats will be shown at the end of each quest/level so the players can work on improving their speed run for that part of the game next time around. It’s the perfect RPG for those of us who only have fifteen minutes of game time! Where I’m at: I’m still at the prototyping stage attempting to but all the basic framework pieces in place that will at minimum give me one level to rush through. I’ve been working on this prototype for about a month now though so I’m going to have to step it up a bit or I’m not going to get finished in time (remember I’ve only got 85 days left!) Lots of the game code is in place (although pretty sloppy) but I still can’t play through that first quest/level just yet. That’s my goal to finish up by the end of next Sunday (3/25/2012). You can all hold me to that and cheer me on or heckle me throughout the week. Either way that should help me stay a bit more motivated and focused. In my head this feels like it’s going to be a fun game so I’m looking forward to seeing how it actually plays!

    Read the article

  • 15 Kasim 2012 Oracle Day

    - by TUFEKCIOGLU,FATIH
       15.Kasim'da Harbiye Istanbul Kongre Merkezi'nde düzenlenecek Oracle Day'e ait etkinlik bilgileri : Oracle Day etkinlik bilgileri için tiklayiniz    En Son Teknolojiden Faydalanin: Inovasyona ve Rekabete Zaman Birakin 15 Kasim 2012 Bulut Bilisim, Mobilite, Sosyal Medya ve Büyük Veri, bildigimiz dünyayi yeniden tanimliyor. Bu teknolojileri kurumuna ilk getirenlerden biri olun; daha hizli yeni ürün ve hizmet gelistirme, müsteri deneyimini iyilestirme ve yeni inovatif is modellerini hayata geçirme firsati yakalayarak rekabetteki konumunuzu güçlendirin. Oracle ve is ortaklari bu noktada size, teknolojik yenilikleri kurumunuza uyarlamanizda yardim ederken, sizin de piyasadaki degisimlerden rakiplerinizden önce avantaj elde etmenizi saglar. Oracle'in, birlikte çalismak için tasarlanmis olan yazilim ve donanimlarda en yeni teknolojileri kullanarak, bilgi teknolojilerini nasil sadelestirdigini ögrenmek için Oracle Day'de bize katilin. Oracle Day'de: Oracle'in Bulut Bilisim, Büyük Veri, Sosyal Medya, is uygulamalari çözümleri hakkinda bilgi edinme, Basarili is dönüsümleri hakkinda örnek basari hikayelerini dinleme, Sizinle ayni zorluklari tecrübe eden sektör çalisanlariyla biraraya gelme, Oracle uzmanlari ve is ortaklari ile tanisma ve yeni ürün tanitimlarini izleme, Oracle OpenWorld'den en yeni ürün bilgilerini edinme firsatini kaçirmayin... Saygilarimizla, Oracle Türkiye Hemen Kaydolun! Platin Sponsor Istanbul Kongre Merkezi Taskisla Caddesi Harbiye 34367 Istanbul / Türkiye 15 Kasim 2012, Persembe 08:30 - 18:30 LCV: [email protected] oracle.com/oracleday Bizi takip edin: #oracleday   Oracle Is Ortagi Müsteri Basari Hikayesi TROUG Sunum Ingilizce'dir  Günün Ajandasi 08:45-09:30 Kayit 09:30-10:00 Hos Geldiniz Filiz Dogan, Genel Müdür, Oracle Türkiye 10:00-10:30 Navigating Complexity by Simplifying I.T. Andrew Mendelsohn, Kidemli Baskan Yardimcisi, Oracle Veritabani Sunucu Teknolojileri, Oracle           10:30-11:00 Dönüsümsel Bulut Yolculugu Ilker Kuruöz, CIO, Turkcell 11:00-11:20 Yeni Dönemde Veri Merkezlerinin Olmazsa Olmazlari Yalim Eristiren, Genel Müdür Yardimcisi, Intel 11:20-11:30 Slimfit Feyza Narli, Is Çözümleri Direktörü, Innova 11:30-12:00 Java ile Inovasyon Cuma Yigit, Teknik Mimar, Etiya Yusuf Tok, Java Grup Yöneticisi, OBSS Ersun Engel, Satis Müdürü, Oracle 12:00-12:10  Kahve Molasi       1. SALON 2. SALON 3. SALON 4. SALON 5. SALON 6. SALON 7. SALON 8. SALON 9. SALON 10. SALON   Müsteri Deneyimi: Çalisaninizi Yetkinlestirin. Markanizi Güçlendirin. Is Süreçlerinde Degisim Daha Fazla Veri, Daha Hizli Sonuç: Isinizi Analitik Çözümlerle Güçlendirin Peki Ama Nasil? Bulut Uygulayicilari için Çözüm Haritasi Is Uygulamalarinizda Inovasyonun Gücünü Kullanin Yeni Nesil Veri Merkezi ile BT'nin Gücünü Ortaya Çikartin Oracle & Is Ortaklari Çözümleri - Basari Hikayeleri I Oracle & Is Ortaklari Çözümleri - Basari Hikayeleri II Oracle Finansal Hizmetler - Core Banking and Analytical Solutions Oracle User Group (TROUG) 12:10-12:40 Müsteri Deneyimi: Çalisaninizi Yetkinlestirin. Markanizi Güçlendirin. Tekfen Ceyhan Çelik Fabrikasi Maliyet Yönetimi ve Üretim Takibi Daha Fazla Veriyle, Daha Hizli Hareket: Yaraticiligi Aksiyonla Güçlendirme Architect Your Cloud: A Blueprint for Cloud Builders Technology Strategies that Drive Business Excellence: Get Social. Be Mobile. Run Cloud. Yeni Nesil Veri Merkezi ile BT'nin Gücünü Ortaya Çikartin Innovate with Oracle - Virtual Banking and Self Service Channels What's Next for Oracle Database?   Oracle Innova Oracle Oracle Oracle Oracle Oracle Oracle 12:40-13:40 Ögle Yemegi 13:40-14:10 Uygulamalariniz Artik Bulutta 21. Yüzyilda Finans: Potansiyeli Kullanin - Sonuçlara Ulasin! "Düsünce Hizinda" Intel Islemcili Oracle Büyük Veri ve Is Analitigi Çözümleri Deniz Seviyesinden Bulutlara I CRM'inizi Sosyallestirin: Telaura Sosyal CRM Yeni Nesil Veri Merkezinde Trend: Sadelik Abone Bilgi Yönetim Sistemi (ABYS) Yüksek Oracle Veri Tabani Performansi - Oracle Veri Tabani Oracle Veri Depolama Sistemi ile Entegre Oldugunda Sigortacilikta Finansal Transformasyon ve Entegre Veri Ambari Çözümleri SQL/PLSQL Yeni Özellikler   Oracle Oracle Intel Oracle Etiya Oracle Inspirit Oracle Oraturk TROUG 14:10-14:20  Kahve Molasi 14:20-14:50 Satis ve Pazarlamada Sosyal Mecralar Müsteri Basari Hikayeleri Paneli: Degisim Yolculugu ve Sonuçlari Tukas'in Analitik Yolculugu Deniz Seviyesinden Bulutlara II Loupe: IP Tabanli Servisler için Proaktif Izleme Veri Merkezinizdeki Riskleri Ortadan Kaldirin Oracle iAS to WebLogic Migrasyonu Oracle ZFS Storage Appliance - Turkcell Deneyimleri Analytical Transformation - Risk and Finance Together to Address the Regulatory Changes Today and Tomorrow Veri Madenciligi Veritabaninda Yapilir: Uygulamalariyla Oracle R Enterprise ve Oracle Data Mining Opsiyonu   Oracle Akbank, Teknosa, Dogus Holding, Ceynak Gtech Oracle Netas Oracle OBSS Turkcell&Gantek Oracle TROUG 14:50-15:00  Kahve Molasi 15:00-15:30 Yetenek Yönetiminde Entegre Çözümler: Taleo ile Ise Alim Artik Daha Kolay Müsteri Basari Hikayeleri Paneli: Degisim Yolculugu ve Sonuçlari Büyük Veri & Exalytics - Exadata'nin Gelecek Rotasi - Bütünlesik (Engineered) Sistemler'de Ücretsiz Platin Hizmetleri Aksigorta Oracle ATS (Application Testing Suite) ile Uygulamalarini Nasil Test Ediyor? Üstün Performans ve Esneklik ile Servis Seviyenizi Arttirin Akilli Belediyecilik Uygulamalarinda Oracle BPM ile Süreç Yönetimi Teyp ile Uçtan Uca Yedekleme Çözümleri Connecting with Customers to Enhance Revenue Generation: Unleashing the Power of an Enterprise Revenue Management and Billing Solution Günümüzün Uygulama Mimarisi Sorunlari ve Çözüm Önerileri   Oracle Akbank, Teknosa, Dogus Holding, Ceynak Oracle Oracle Aksigorta Oracle Sampas Remivac Oracle TROUG 15:30-15:40  Kahve Molasi 15:40-16:10 JD Edwards Yeni Sürüm ile Satis Agi Yönetimi Oracle Policy Automation ile Türkçe Merkezi Is Kurallari Yönetimi Oracle BI ile Kurumsal Karne Çözümleri Turkcell Süperbulut ile Yazilim Artik Hizmetinizde Bütünlesik (Engineered) Sistemler Artik SAP Müsterilerinde de Fark Yaratiyor Yeni Nesil Veri Merkezi Olusturma: Denenmis ve Ispatlanmis Yöntemler Türk Telekom SOA Projesi Basari Hikayesi Yapi Kredi Sigorta Uygulamalarinda Son Kullanici Deneyimini Nasil Izliyor? 2013 NFC Trendleri Karagöz ile Hacivat Veri Tabaninda   TupperWare & Akademi Danismanlik Oracle Oracle Turkcell Oracle Oracle Türk Telekom Yapi Kredi Sigorta Smartsoft TROUG 16:10-16:20  Kahve Molasi 16:20-16:50 Tutarli, Tekil Veriye Yolculuk: Oracle Ana Veri Yönetimi Turkcell/Superonline'da Varlik Yönetimi Her Tür Verinin Endeca ile Rahat Analizi Bulut Bilisim'de Güvenlik Nasil Saglanir? Rekabette Kazanmak: GoldenGate ile Dogru Kararlari Rakiplerinizden Önce Verin. Veri Merkeziniz için Bulut Altyapi Stratejileri Oracle Orkestrasi: Çok Sesli Yönetime Kulak Verin Lojistik Zekasi / Horoz Lojistik Basari Hikayesi Bütünlesik Sistemler (Engineered Systems) ile Yüksek Performansli Java Uygulamalari International Growth - Helping the Banks Standardize Overseas Operations Oracle Big Data   Oracle Turkcell Oracle Oracle Oracle Oracle Kora & Horoz Lojistik Oracle Oracle TROUG 16:50-18:30  Kokteyl     Eger bir kamu kurumunun/kurulusunun çalisani veya görevlisi iseniz, bu etkinlige iliskin önemli etik kurallara iliskin bilgi için lütfen buraya tiklayiniz Copyright 2012, Oracle and/or its affiliates. All rights reserved. Bize Ulasin | Yasal Uyarilar | Gizlilik Beyani

    Read the article

  • 13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

    - by user1898041
    Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

    Read the article

  • CodePlex Daily Summary for Tuesday, March 23, 2010

    CodePlex Daily Summary for Tuesday, March 23, 2010New Projects.NET StarCraft II Replay Parser: A .NET 3.5 Library used to parse StarCraft II replays. Developed in C# 3.5.BackToBasics "B2B" Chat: With technology and software getting more and more complicated, why not get back to basics with BackToBasicsChat. B2B allows you to chat over a ser...Dark Neuron Game Engine: Dark Neuron allows you to easily create fun and interesting games with no need of developing basic game components. This engine is developed for C#...DeepZoom Pivot Constructor: Library to make building DeepZoom images and Pivot displays simpler.ePaper reader: The project is aimed at creating a tool which helps in reading electronic editions of news papers(pdf/flash)FSharpPageProvider for EPiServer CMS 6: This project starts as the port of EPiServer XmlPageProvider to F# programming language. Hammock for REST: Hammock is a REST library for .NET that greatly simplifies consuming and wrapping RESTful services.Kirill Osenkov: Various small projects, tools, utilities and samples by Kirill OsenkovliveDB: liveDB - web client for sql serverLucilla Framework: lucilla frameworkMVC Foolproof Validation: MVC Foolproof Validation aims to extend the Data Annotation validation provided in ASP.NET MVC. Initial efforts are focused on adding contingent va...MVC2Forums: MVC2Forums is simply a forum system based upon MVC2.Mvvm Foundation Silverlight: Mvvm Foundation Silverlight is a library of classes that are helpful when building Silverlight applications based in the MVVM pattern. This librar...MyPersonalWebsite: This is my personal web site developed using ASP.NET MVC 2Planner: Planner makes it easier for all peoples to plan your tasks. It's developed in Delphi.Prose: Prose is an playground for an experimental JavaScript like language compiler. Eventually it will implement 0-CFA, CFA2, and a Tracing JITQuestTracker: QuestTracker is a todo list presented in the format of a quest tracking list such as the one in World of Warcraft.SevenZipLib: SevenZipLib is a C# interface to the 7-zip library.SimpleGeo .Net: .Net Client library for the SimpleGeo.com serviceNew ReleasesAutenticar no OpenLDAP utilizando pGIna: DLL LDAPAuth Plus: New Group: No LoginBMap.NET: BMap.NET 2: This is the 2nd version of BMap.NET. It has included these tags: Bing Maps, and "About BMap.NET".Cronos: Version 2.04: This is primarily a bug-fix release. Several numerical issues have been resolved, and a resource leak (of MS Windows graphics objects) has been fi...EV Dashboard: v1.0: This release includes support for an App.config file and Auto Connect, which will connect to the specified BMS at startup. Note: You still have to ...GKO Libraries: GKO Libraries 0.1 Beta: 0.1 Beta Added More utilities and functions RefactoringsGLB Virtual Player Builder: 0.4.2 Beta: Beta build that includes a new player creator.HKGolden Express: HKGoldenExpress (Build 201003222215): New features: (None) Bug fix: Fixed bugs of unable to parse XML file stream returned from HKGolden API, as the encoding of XML file stream chang...jQuery Web Controls ASP.Net: jQueryWebControls 1.1.1.2: En esta versión se han corregido problemas existentes en la ejecución de los scripts de jquery cuando se utilizaban MasterPage y/o Ajax Control Too...LightKit: Version 0.2.2: Fixed: fixed bug when CollectionItemsEditor ditermines IsChanged property incorrectly fixed ObjectEditor`a thisstring propertyName method wrong l...LINQ to Twitter: LINQ to Twitter Beta v2.0.8: New items added since v1.1 include: Support for OAuth (via DotNetOpenAuth), secure communication via https, VB language support, serialization of ...MapWindow6: MapWindow 6.0 msi (March 22): This version fixes the icons for the desktop installer and changes the install directory to Program Files\MapWindow instead of Program Files\ISU.Math.NET Numerics: 2010.3.22.1334 Build: Latest alpha buildMiniCalendar Web Part: MiniCalendar Web Part 1.8: A small web part to display links to events stored in a list (or document library) in a mini calendar (in month view mode). It shows tooltips for t...OCInject: Release Two: This release brings some missing features such as Singleton support, Func<T> factories and child containers. It, also, has an updated constructor ...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (March 2010): Installer of the latest binaries of Phalanger 2.0 (March 2010) and its integration into Visual Studio 2008. Easy installer with automatic IIS int...Planner: Planner: firstQuestTracker: QuestTracker 0.1: This is the preliminary release of QuestTracker. There's not much documentation or many features yet, but it is functional. Any feedback would be a...QuestTracker: QuestTracker 0.1.1: Bugfix for QuestTracker 0.1QuestTracker: QuestTracker 0.1.2: Fixes an issue with saving the quest list.Rawr: Rawr 2.3.13: We're pleased to announce that, after long last, Rawr3 has entered public beta. You're still welcome to continue using Rawr2 (that's what you're re...Single Web Session: Alpha Model Plugin: !How to use Single Web Session add following line into your web config <httpModules> <add name="SingleSession" type="SingleWebSession.Model.W...SMIL - SharePoint Map Integration Layer: SMIL 1.0: Custom data field Extracts Lat/Lon from EXIF from images being uploaded. Map Web Part Filter with SharePoint views Filter by connecting to...sTASKedit: sTASKedit 42532 (Developer Alpha): This release is only to verify the currently decoded task structure... Supported files: tasks.data (v1.3.6 client)VCC: Latest build, v2.1.30322.0: Automatic drop of latest buildVisual Studio DSite: Advanced Notepad (Visual C++ 2008): An notepad written in c that can save in a rich text file format.Wallpaper Rotator: Wallpaper Rotator 0.5: Wallpaper Rotator 0.5 This version includes the following improvements: Saving the choice of "Random Order (Shuffle Mode)" Updating the configu...Most Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBlogEngine.NETLINQ to TwitterPHPExcelFarseer Physics EngineFacebook Developer ToolkitNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices: Composite WPF and SilverlightN2 CMS

    Read the article

  • Why Does Adding a UDF or Code Truncates the # of Resources in List?

    - by Jeffrey McDaniel
    Go to the Primavera - Resource Assignment History subject area.  Go under Resources, General and add fields Resource Id, Resource Name and Current Flag. Because this is using a historical subject area with Type II slowly changing dimensions for Resources you may get multiple rows for each resource if there have been any changes on the resource.  You may see a few records with current flags = 0, and you will see a row with current flag = 1 for all resources. Current flag = 1 represents this is the most up to date row for this resource.  In this query the OBI server is only querying the W_RESOURCE_HD dimension.  (Query from nqquery log) select distinct 0 as c1,      D1.c1 as c2,      D1.c2 as c3,      D1.c3 as c4 from       (select distinct T10745.CURRENT_FLAG as c1,                T10745.RESOURCE_ID as c2,                T10745.RESOURCE_NAME as c3           from                 W_RESOURCE_HD T10745 /* Dim_W_RESOURCE_HD_Resource */            where  ( T10745.LAST_RUN_PER_DAY_FLAG = 1 )       ) D1 If you add a resource code to the query now it is forcing the OBI server to include data from W_RESOURCE_HD, W_CODES_RESOURCE_HD, as well as W_ASSIGNMENT_SPREAD_HF. Because the Resource and Resource Codes are in different dimensions they must be joined through a common fact table. So if at anytime you are pulling data from different dimensions it will ALWAYS pass through the fact table in that subject areas. One rule is if there is no fact value related to that dimensional data then nothing will show. In this case if you have a list of 100 resources when you query just Resource Id, Resource Name and Current Flag but when you add a Resource Code the list drops to 60 it could be because those resources exist at a dictionary level but are not assigned to any activities and therefore have no facts. As discussed in a previous blog, its all about the facts.   Here is a look at the query returned from the OBI server when trying to query Resource Id, Resource Name, Current Flag and a Resource Code.  You'll see in the query there is an actual fact included (AT_COMPLETION_UNITS) even though it is never returned when viewing the data through the Analysis. select distinct 0 as c1,      D1.c2 as c2,      D1.c3 as c3,      D1.c4 as c4,      D1.c5 as c5,      D1.c1 as c6 from       (select sum(T10754.AT_COMPLETION_UNITS) as c1,                T10706.CODE_VALUE_02 as c2,                T10745.CURRENT_FLAG as c3,                T10745.RESOURCE_ID as c4,                T10745.RESOURCE_NAME as c5           from                 W_RESOURCE_HD T10745 /* Dim_W_RESOURCE_HD_Resource */ ,                W_CODES_RESOURCE_HD T10706 /* Dim_W_CODES_RESOURCE_HD_Resource_Codes_HD */ ,                W_ASSIGNMENT_SPREAD_HF T10754 /* Fact_W_ASSIGNMENT_SPREAD_HF_Assignment_Spread */            where  ( T10706.RESOURCE_OBJECT_ID = T10754.RESOURCE_OBJECT_ID and T10706.LAST_RUN_PER_DAY_FLAG = 1 and T10745.ROW_WID = T10754.RESOURCE_WID and T10745.LAST_RUN_PER_DAY_FLAG = 1 and T10754.LAST_RUN_PER_DAY_FLAG = 1 )            group by T10706.CODE_VALUE_02, T10745.RESOURCE_ID, T10745.RESOURCE_NAME, T10745.CURRENT_FLAG      ) D1 order by c4, c5, c3, c2 When querying in any subject area and you cross different dimensions, especially Type II slowly changing dimensions, if the result set appears to be short the first place to look is to see if that object has associated facts.

    Read the article

  • HyperV on Domain Controller or DC on HyperV?

    - by Michael Stum
    I want to setup a little fileserver/domain controller/sharepoint server. SharePoint shouldn't run on the DC directly, so I want to use HyperV. But I never used it before, so I wonder: Should I install the Domain Controller and HyperV Role and run 1 VM for SharePoint? Or should I run HyperV server and then 2 servers, one for SharePoint and 1 for DC? Usage is minimal with only 1 user. Hardware will be an Athlon II X3 with 3x2.9 GHz and 4 GB RAM. Operating System will be Server 2008 R2 Standard in all cases.

    Read the article

  • Toshiba Satellite L655D-S5050 Processor Upgrade

    - by C-dizzle
    I have been searching for hours to see what kind of upgrade I can do with my processor. I just ordered replacement memory so I can go to 8GB instead of 3GB and now want to see what is available for my CPU. Currently this is what is on my laptop: (in case some of you don't know what comes with this model) Windows 7 Home Pro - 64 Bit AMD M880G Chipset AMD Athlon II Dual Core P320 - 2.1 GHz, 1MB L2 Cache The memory I ordered was Crucial 2 x 4GB DDR3 1333 PC3-10600 I'm sure someone out there can help me, because google hasn't been to friendly with me today.

    Read the article

  • New build won't POST, no video, no beeps

    - by Nate Koppenhaver
    Specs: Motherboard: MSI 760GM-P23 FX Integrated graphics (on MoBo) CPU: AMD Athlon II x4 640 RAM: GeIL Pristine 4GB DDR3 Case/PSU: TOPOWER TP-4107BB-400 Is not POSTing, no video output, no beeps. When RAM is removed, 3 beeps. I have tried removing and replacing the CPU and all the power cables with no change. Resetting the BIOS (by removing and replacing the battery) did nothing as well. Is there something I'm forgetting (1st time building from components), or could one of the components be bad? EDIT: New development: with CPU and RAM installed correctly, it will turn on lights and fans (still no POST) and after running for a minute or so it will turn off and the PSU will make a buzzing noise that ceases only when unplugged.

    Read the article

  • Videoediting slow on windows with HD footage in .MOV format

    - by Joakim
    My camera is a Canon 5D mark II that serves me .mov files in HD. But these are a pain in the neck to edit on my pc. I have tried Premier, Vegas, Pinnacle, etc, but it is almost impossible to edit and do a movie. I do have a good computer with Windows7 but that doesn't help me, and I don't want to buy a new monster pc just for that task. Question: I could convert the files, but what would be the best format? I don't want to lose much quality. Anyone have any ideas?

    Read the article

  • Windows 7 64 Bit Can't Get Past Format

    - by Soren
    favorite Just assembled a new machine: MSI 880GM-E41 motherboard 500GB Samsung hard drive AMD Athlon II X4 640 processor 4GB RAM Windows 7 64 Bit LITE-ON Black 4X Blu-ray reader I boot up, start the install. When it gets to the screen to select what partition, the motherboard loses power. It doesnt make sense, I can leave it in the bios settings for a very long time and it doesnt lose power. When it does lose power, the monitor shuts down and the mouse loses power, but the power light stays on. I cannot tell if it is a harware or software problem.

    Read the article

  • Windows 7 Can't Get Past Format

    - by Soren
    Just assembled a new machine: MSI 880GM-E41 motherboard 500GB Samsung hard drive AMD Athlon II X4 640 processor 4GB RAM Windows 7 64 Bit LITE-ON Black 4X Blu-ray reader I boot up, start the install. When it gets to the screen to select what partition, the motherboard loses power. It doesnt make sense, I can leave it in the bios settings for a very long time and it doesnt lose power. When it does lose power, the monitor shuts down and the mouse loses power, but the power light stays on. I cannot tell if it is a harware or software problem.

    Read the article

  • Videoediting slow on windows with HD footage in fileformat .MOV

    - by Joakim
    Hi, My camera a Canon 5D mark II serves me .mov files in HD - but these are a pain in the neck to edit on my pc. I have tried Premier, Vegas, Pinnacle etc - but it is almost impossible to edit and do a movie. I do have a good computer with windows7 but that doesnt help me, and I dont want to buy a new monster pc just for that task. Question: I could manage to convert the files, but what would be the best format? I dont want to loose to much quality. Anyone have any ideas? Best regards, Joakim

    Read the article

  • IIS will not install on Windows 7 Pro 64 bit

    - by Paul
    I have a new PC running Windows 7 Professional 64 bit. I have an issue installing IIS - it goes through the install process, but at the end tells me "not all components could be installed", with no additional information given. There is no sign of an error in the install log or in event viewer. However, at this point, IIS is installed and working! I can run IIS manager, browse to localhost and see the default page, but at the next reboot the system rolls back and th einstall vanishes. I have tried installing II using the Windows Components section in Add/Remove Programs, I have also tried the Web Platform Installer and using the command line, all with the same end result.

    Read the article

  • Selection between two laptops for casual gaming [closed]

    - by Prabhpreet
    I have selected two laptops that meet my budget. Here are the differences: Laptop #1: 4GB Ram, Intel Core i5 2450M 2nd Gen processor w/ 2.5 Ghz clockspeed NVIDIA GeForce GT 520MX DDR3 1 GB Dedicated Graphics 750 GB SATA II Hard disk USB 2.0 Ports 6 hrs battery life Laptop #2: 4 GB Ram, Intel Core i5 3210M 3rd Gen processor w/ 2.5 Ghz clockspeed Integrated Intel HD Graphics 4000 500 GB SATA Hard disk USB 3.0 Ports 3 hrs battery life (This concerns me) First and foremost, does dedicated graphics matter for a casual gamer like me? Secondly, does the generation of the processors make a difference despite the same clockspeed. Thirdly, do usb 3.0 ports make a difference? And lastly, which laptop is more future proof? Please help me out. Thanks!

    Read the article

  • xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

    - by mazgalici
    root@mazgalici:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server i686 Ubuntu Current Operating System: Linux mazgalici 2.6.18-194.26.1.el5.028stab079.2PAE #1 SMP Fri Dec 17 19:34:22 MSK 2010 i686 Kernel command line: quiet Build Date: 10 November 2010 11:25:26AM xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see ) Current version of pixman: 0.16.4 Before reporting problems, check to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 01:28:48 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log

    Read the article

  • PC reboots automatically in the begining

    - by user233508
    I have a AMD Phenom II 3GHz. 2 GB RAM system running on Windows 7. Off late my PC does not start properly I have to start it at least 7-8 times before it starts. It starts and then shuts down. Every time the time for which the system is up increases. After 7-8 attempts it starts an works fine. I have to give it a min between restarts (USB mouse light goes off). If I try restarting before this time the PC does not start. I am suspecting humidity playing some factor as this issue has started creeping up ever since the rains have started.

    Read the article

  • ASUS P6X58D and 12 GB of RAM

    - by Hunter
    I just assembled my new PC and it screams, BUT it's only recognizing 8 GB of RAM in BIOS and OS rather than the installed 12 GB. In the BIOS the RAM was registering at 1066 MHz so I set it to 1600 MHz. I updated the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS: Windows 7 Ultimate 64-bit Motherboard: ASUS P6X58D Premium CPU: Intel Core i7 920 RAM: CORSAIR XMS3 12 GB (6 x 2 GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD: Intel 80 GB SSD SATA II Power supply: Kingwin 1000 W Modular I've installed the Beta BIOS 0808 but no luck!

    Read the article

  • Dual boot Windows XP 32 bit and Windows 7 64-bit

    - by Santanu Roy
    My system config is AMD phenom-II x2 550 processor, 2x2gb(800fsb)ddr2 zion ram, gigabyte ga-m61pme-s2 motherboard, 160gb sata hdd. Now I am planning to install Windows XP sp3 (32-bit) and Windows 7 (64bit). My first questions are: Is my system enough for the above mentioned two OSes? Which OS one should be installed first on local disk c: drive? I have both XP and vista drivers on separate disks as provided with my motherboard but don't have drivers for win-7, so can I use my vista driver for win-7?

    Read the article

  • How do I disable other monitors while running games in Wine?

    - by Michael Cheng
    My current setup is: * Dual GTS 250 video cards * 3 Monitors * Used nvidia-settings to run each monitor as a separate x session * This is all running on Linux Mint Debian Edition When running games (Starcraft II) in Wine via PlayOnLinux, I've found that the mouse does not get locked. I already tried various solutions littered across the web and none work so I'd rather just disable my other two monitors while playing. Does anyone know of a method where I can turn off my other two monitors (not my primary monitor) while running Wine and then turn then back on afterwards? I don't mind having to manually run a script before and after gaming. Thanks.

    Read the article

  • Computer won't recognize second WD internal HD

    - by music man
    I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

    Read the article

  • How to set up RAID 1 on Dell PERC S300 With Existing OS Install

    - by Daniel Dugger
    We have a server that is being used in production, but it was not originally meant to. The main thing I want to add to it is a Dell PERC S300 RAID Card to have the main hard drive (Windows Server 2008 R2) mirrored on another hard drive. I can not initialize the disk and wipe the the OS to create the array and then re-install. Is there a way to create the array with a current hard drive, without affecting it, and just mirroring the drive? If that card is not an option, is there a card that would allow that? The server is a Dell PowerEdge T110 II.

    Read the article

  • Enabling Surround sound on a Realtek ALC892 via SPDIF, on Windows 7

    - by Alex
    I have a problem with my ALC892, on an ASRock mainboard (ASRock 890FX Deluxe4). I get only stereo sounds if I use SPDIF connection, in general. My amp shows that is getting surround sound only when I use the Test feature of Windows 7. This test feature allows to know which formats are supported by the audio chip. The tests render correctly both Dolby Digital and DTS. You can find this test under Sounds, Playback Devices, Select Digital Audio, then "Properties". I am using Windows 7 x64, with the latest drivers from the official Realtek website. I also tested other driver versions, both from the Realtek website and from the ASRock one, but had no luck. Thanks for the help. Some specs: CPU: AMD Phenom II X4 965 MOBO: ASRock 890FX Deluxe4 (with onboard Realtek ALC892) Audio amp: Onkyo R-380 (works fine with other sources like PS3 and Xbox 360)

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >