Search Results

Search found 55517 results on 2221 pages for 'set intersection'.

Page 27/2221 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Can't set-up Wifi Adhoc on my Raspberry Pi with an USB dongle

  - by Wouter

  I am trying to set-up an access point (ad-hoc) for my Raspberry Pi. That means I'm trying to "share" the ethernet connection over Wi-Fi. I am doing this using my Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter. When following a tutorial (or actually every tutorial), it immediately goes wrong. root@pinkypi:/home/pi# iwconfig wlan0 mode ad-hoc Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Device or resource busy. I already tried ifdown and not having it in the USB port at the startup. If it helps, every action with the thing fail (or at least setting the mode). I am using Debian. I'm sure I'm overseeing something, but I can't find out what. What is wrong?

  Read the article

• rsync set group owner, group permission

  - by ChrisInEdmonton

  I want to use rsync to transfer files from my computer to a remote Linux system. Regardless of the local file's group ownership, I want to set these values on the remote side. If I was on the remote Linux system, I could create the directory and set the ownership and permissions as: mkdir my_directory chown :my_group my_directory chmod 775 my_directory If I create the directory locally and then use rsync (remember, I don't have my_group locally), I do: rsync -ae ssh --chmod=ug+rw,Dug+rwx my_directory remoteserver:dest That works, but I cannot figure out how to set the group owner through rsync. If I do a chmod g+s dest, my_directory has the correct group owner but all of the files inside have the incorrect group owner.

  Read the article

• Setting up Linux VPN Client on Mint: Never sends "Set-Link-Info" packet

  - by cabanaboy

  I have tried to set up a VPN Connection on the Linux Mint disto, but could not get it working. When I use a Windows 7 VPN client it works fine. I brought up Wireshark on both Windows and Linux machine and noticed that on the Windows machine, the client never attempted to send the "Set-Link-Info" packet whereas the Windows (working) VPN client did. Why isn't the Linux Mint client sending the "Set-Link-Info" packet. I think if it did that, then my connection would work. What am I missing?

  Read the article

• Logging Apparently Not Working - Can't Set Configure Replication

  - by square_eyes

  I'm using a tutorial to set up a master (single) slave setup. When I run the command show master status; I get Empty set (0.00 sec). I have done a lot of research and believe that the log file I have set up isn't being used properly. The master is a Windows server, and I am administering it through workbench. The log file (log-bin.log) I have configured in the options exists, and is accessible by 'System'. But when I open it as a text file it doesn't have any data. So I'm assuming it's not getting used properly. How can I get the logging happening so I can finish setting up this replication? Edit: Purely for reference here is the tutorial. I followed all the steps and double checked everything up until show master status.

  Read the article

• Set certain WSUS updates to auto-install

  - by Nicolas

  We're running a WSUS server for the simple purpose of caching updates. Since we are a very small network of all "power users", we've got the domain group policy for WSUS updates on the clients set to prompt for download/install. i.e. We don't want updates to install without our knowledge. But there are a few cases where it would be nice to be able to set a certain update to auto-install. e.g. Windows Defender updates, Malicious Software Removal Tool, Outlook Junk Email Filter, etc. Basically all the silly little updates that you would always install anyway and don't require a restart. Is there a way to set the general policy to prompt for download/install, but auto-install certain regular updates? P.S. WSUS itself does have the facility to auto-approve certain updates. That part works. Facts & Figures: SBS 2003 domain Windows 7 Pro clients Windows XP Pro clients

  Read the article

• Suggestion for auditd set-up

  - by JVerstry

  Hi, I am trying to learn about securing a Linux box (I am using Ubuntu). Auditd is recommended for monitoring activities on the node. I have managed to install it, but I can't find much information about proper set-up to secure my node. How should I set-up auditd to make my node more secure? What should I monitor? Why? I am looking for set-up examples and recommendation from experienced administrators. Thanks!

  Read the article

• How to set up Dell OMSA tools on Debian 6 (Squeeze) (PE2950)

  - by javano

  I assume I have set up them up incorrectly or am missing a library or dependency. When I log into the OMSA web interface I can't see anything Also, omreport tells me nothing; root@box:~# omreport storage controller No controllers found I assume these two will use the same source of information so what ever is wrong will fix them both. I set up OMSA as per these instructions. Also I have compiled MegaCLI (as this is a PowerEdge 2950 with a Perc 6/i controller) and I have used that to update the RAID firmware, so that works, but the Dell tools aren't. What have I missed during set up? root@kvm1:~# cat /etc/issue Debian GNU/Linux 6.0 \n \l root@kvm1:~# uname -a Linux kvm1.mivoice.cust.vostron.net 3.4.9 #1 SMP Wed Aug 22 19:08:46 BST 2012 x86_64 GNU/Linux

  Read the article

• 'Object variable or With block variable not set' error when setting a range in VBA

  - by David Gard

  I have a function that creates a Pivot Table, but I am getting an error when I try to set a range that will be merged and have a title added to it. In the below code, pivot_title_range is a 'String' variable, and is optional when calling the funtion. title_range is a 'Range' variable. Both lines that set the range (whether or not the users declares pivot_title_range) cause the same error. If pivot_title_range = "" Then title_range = ActiveSheet.Range("B3:E4") Else title_range = ActiveSheet.Range(pivot_title_range) End If Here is the error that I am getting - Run-time error '91': Object variable or With block variable not set If required, here is a Pastebin of the full function - http://pastebin.com/L711jayc. The offending code starts on line 160. Is anybody able to tell me what I am doing wrong? Thanks.

  Read the article

• Page File - Why set one for each drive?

  - by Magic

  Hello, I have Windows Vista Business Edition running on my laptop (brand is HCL). I have 4 HDD which are as follows - C - 29.2 GB (of which only 3.68 GB is free) D - 39 GB (of which 37.8 GB is free) E - 39 GB (of which 37.3 GB is free) F - 41.6 (of which 41.4 GB is free) However, my page file settings are as below. Automatically manage paging file for all drives. Question - Why should I set one for each drive? Should I set my page file on the OS Root Drive. I happen to talk to a System Administrator in an IT company and he advised that we should never set the page file on the OS drive but on an alternate drive wherever possible. It would be really helpful, if you can guide me here or at least point me to the right resources so that I can read about paging and best practices of paging. Cheers,

  Read the article

• How to set up Google Apps (mail) MX Records on DNSMadeEasy (screen shot included)

  - by user41847

  I am attempting to complete google's mail MX setup. I would link, but new users can't have two links, and I think the following img is more important. This is what my input options are for DNS Made Easy, which manages my domain: http://img94.imageshack.us/img94/5662/dnsmadeeasy.gif I would like to confirm that I understand the fields correctly. It is my understanding that I am supposed to: Leave Name (Host) Blank Set Data to ASPMX.L.GOOGLE.COM. (and repeat for each of the server addresses provided by google) Set the MX level to what Google has in "Priority" column Set TTL as high as possible Did I get it right? The nightmare scenario is that I screw up, and bring everyone's mail down :P Thanks in advance for your time.

  Read the article

• How can I set Out-Of-Office in a shared mailbox

  - by balexandre

  I would want to set the out-of-office automatic response to all emails that arrive to our [email protected]. currently in the Outlook, I only have one mailbox (the user mailbox) but it has 2 shared mailboxes setup. I have tried to create a Rule that says: for all email received on account [email protected] forward to user [email protected] and make that user to set up the Out-of-office message, but it simply did not work, and I suspect that the rules only apply to the user account and not the shared account... How can I set Out-Of-Office in this shared mailbox ?

  Read the article

• What has the most efficient intersection test against an AABB tree - OBB, Cylinder or Capsule?

  - by identitycrisisuk

  I'm currently trying to find collisions in 3D between a tighter volume than an AABB and a tree of AABB volumes. I just need to know whether they are intersecting, no closest distance or collision response. An OBB, Cylinder or Capsule would all roughly fit these purposes but Cylinder and Capsule were the first thing I thought of, which I have found little information about detecting intersections online. Am I right in thinking that they would always be more complex to perform Separating Axis Tests on even though they might seem like simpler shapes? I figure by the time I get my head around SAT for curved shapes I could have done the thing with OBBs but I wanted to find out for sure.

  Read the article

• How can I solve this SAT direct corner intersection edge case?

  - by ssb

  I have a working SAT implementation, but I am running into a problem where direct collisions at a corner do not work for tiled surfaces. That is, it clips on the surface when going in a certain direction because it gets hung up on one of the tiles, and so, for example, if I walk across a floor while holding both down and left, the player will stop when meeting the next shape because the player will be colliding with the right side rather than with the top of the floor tile. This illustration shows what I mean: The top block will translate right first and then up. I have checked here and here which are helpful, but this does not address what I should do in a situation where I don't have a tile-based world. My usage of the term "tile" before isn't really accurate since what I'm doing here is manually placing square obstacles next to each other, not assigning them spots on a grid. What can I do to fix this?

  Read the article

• Aquamacs overrides my custom-set-faces options

  - by Roberto Aloi

  I've just installed Aquamacs on my Mac. I have a .emacs file in my home, which contains all my customizations. Among these, I have a: (custom-set-faces ... ) set of lines, which seems not to be applied automatically. If I select the lines from the .emacs and manually evaluate them, everything works fine. My guess is that these options are overridden in some other place. How can I debug this? Where should I set my custom faces? Thanks guys.

  Read the article

• Powershell Set-Acl fails

  - by Ulrich

  While working on a little backup script I try to change the ACL of a file using Set-Acl in Powershell 1 on Vista and always get the following error message: Set-Acl : The security identifier is not allowed to be the owner of this object. This error persists even if I go a minimal script: $acl = Get-Acl $sourcepath$file $acl |format-list Set-Acl -path $sourcepath$file -AclObject $acl Does anyone know the reason for this error? Obviously I'm not changing the ownership of the file... BTW: What I ultimately want to achieve is to reduce all access rights to ReadAndExecute. Is there maybe an easier way of doing this in Powershell? Thanks for your help! Ulrich

  Read the article

• How to set the laptop screen brightness programatically?

  - by zls

  I'm currently migrating to openbox without gnome session. In unity i can use the vendor keys to set the screen brightness, but in openbox I'm on my own. /sys/class/backlight/acpi_video0/brightness works fine, the problem is that I need sudo to set the brightness and that wouldn't work with keyboard mappings. xbacklight -get/set doesn't do or output anything. I don't really want to use xrandr --brightness. Are there any other options or a way to fix the problems with xbacklight or acpi_video0 ?

  Read the article

• Create setenv.sh to set system property

  - by user3475398

  I have to use setenv.sh to set system properties. I am using Linux OS and Tomcat Server 6. As described here Linux Environment- setenv.sh , I have created a setenv.sh in tomcat/bin, and the only think I added is the export JAVA_OPTS =”-Dmyprojectvar.subname=value -Danothervariable=value -Danother.variable=value” I dont know, is this enough to set the properties. I just want to add three properties to tomcat as system property using setenv.sh. What should I do to complete it successfully? What are the steps for it?I saw this question setenv.sh is not working in http://stackoverflow.com/. No is answer given there and ,even ,I don't understand the question. ie, Do we need to set CATALINA_HOME and other properties somewhere in setenv.sh?.

  Read the article

• Batch script crashing

  - by TamirGali

  My Batch script keeps crashing with the note: "set was unexpected at this time" which I could only see via video recording and checking frame by frame. here is the script: @echo off color 6f set min=0 set max=25 goto REDIR :REDIR set var=0 goto TOP :TOP cls set /a var=%var%+1 set /a rand%var%=%random% %% (max - min + 1)+ min if %rand2%==%rand1% set var=0&goto TOP if %rand3%==%rand2% set var=1&goto TOP if %rand4%==%rand3% set var=2&goto TOP if %rand5%==%rand4% set var=3&oto TOP if %rand6%==%rand5% set var=4&goto TOP if %rand7%==%rand6% set var=5&goto TOP if %rand8%==%rand7% set var=6&goto TOP if %rand9%==%rand8% set var=7&goto TOP if %rand10%==%rand9% set var=8&goto TOP if %rand11%==%rand10% set var=9&goto TOP if %rand12%==%rand11% set var=10&goto TOP if %rand13%==%rand12% set var=11&goto TOP if %rand14%==%rand13% set var=12&goto TOP if %rand15%==%rand14% set var=13&goto TOP if %rand16%==%rand15% set var=14&goto TOP if %rand17%==%rand16% set var=15&goto TOP if %rand18%==%rand17% set var=16&goto TOP if %rand19%==%rand18% set var=17&goto TOP if %rand20%==%rand19% set var=18&goto TOP if %rand21%==%rand20% set var=19&goto TOP if %rand22%==%rand21% set var=20&goto TOP if %rand23%==%rand22% set var=21&goto TOP if %rand24%==%rand23% set var=22&goto TOP if %rand25%==%rand24% set var=23&goto TOP if %rand26%==%rand25% set var=24&goto TOP if %var%==26 goto SHOW goto TOP :SHOW cls echo A=%rand1% echo B=%rand2% echo C=%rand3% echo D=%rand4% echo E=%rand5% echo F=%rand6% echo G=%rand7% echo H=%rand8% echo I=%rand9% echo J=%rand10% echo K=%rand11% echo L=%rand12% echo M=%rand13% echo N=%rand14% echo O=%rand15% echo P=%rand16% echo Q=%rand17% echo R=%rand18% echo S=%rand19% echo T=%rand20% echo U=%rand21% echo V=%rand22% echo W=%rand23% echo X=%rand24% echo Y=%rand25% echo Z=%rand26% pause goto REDIR

  Read the article

• Tkinter Spinbox Widget

  - by anteater7171

  How do I do a command that will set the default value on a Tkinter spinbox widget? For some reason they didn't give it the attribute .set()

  Read the article

• What is the better approach to find if a given set is a perfect subset of a set - If given subset is

  - by Microkernel

  Hi guys, What is the best approach to find if a given set(unsorted) is a perfect subset of a main set. I got to do some validation in my program where I got to compare the clients request set with the registered internal capability set. I thought of doing by having internal capability set sorted(will not change once registered) and do Binary search for each element in the client's request set. Is it the best I could get? I suspected that there might be better approach. Any idea? Regards, Microkernel

  Read the article

• How to find control points for a BezierSegment given Start, End, and 2 Intersection Pts in C# - AKA

  - by softwarequestioneer

  Hi, I've been struggling looking for an understandable way to do this. I have four points, a StartPt, EndPoint, and Intersection points to represent the peak and valley in the bezier. The BezierSegment in C# requires start, controlPoint 1, controlPoint 2, endpoint - however I don't have any control points I only have these two points that lie along the bezier curves (i'm calling them intersection points above)... how can I calculate the two control points? Thanks in advance, this has been driving me crazy. There's some kind of explanation here: http://www.tinaja.com/glib/nubz4pts1.pdf but it's written in postscript and that language makes no sense to me at all - it's over my head.

  Read the article

• Remove from a std::set<shared_ptr<T>> by T*

  - by Autopulated

  I have a set of shared pointers: std::set<boost::shared_ptr<T>> set; And a pointer: T* p; I would like to efficiently remove the element of set equal to p, but I can't do this with any of the members of set, or any of the standard algorithms, since T* is a completely different type to boost::shared_ptr<T>. A few approaches I can think of are: somehow constructing a new shared_ptr from the pointer that won't take ownership of the pointed to memory (ideal solution, but I can't see how to do this) wrapping / re-implementing shared_ptr so that I can do the above just doing my own binary search over the set Help!

  Read the article

• MySQL: difference of two result sets

  - by Zombies

  How can I get the set difference of two result sets? Say I have a result set (just one column in each): result1: 'a' 'b' 'c' result2: 'b' 'c' I want to minus what is in result1 by result2: result1 - result2 such that it equals: difference of result1 - result2: 'a'

  Read the article

• How to override a related sets "add" method?

  - by MB_

  I am working on a django project and i want to send a signal when something get's added to some models related set, e.g. we have an owner wo has a set of collectables and each time the method owner.collectable_set.add(something) is getting called i want signal like "collectable_added" or something. signals are clear to me, but in which manager(?) the "add" method sits that i want to override is unclear to me.

  Read the article

• Is there a sorted_vector class, which supports insert() etc.?

  - by Frank

  Often, it is more efficient to use a sorted std::vector instead of a std::set. Does anyone know a library class sorted_vector, which basically has a similar interface to std::set, but inserts elements into the sorted vector (so that there are no duplicates), uses binary search to find elements, etc.? I know it's not hard to write, but probably better not to waste time and use an existing implementation anyway.

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >