Search Results

Search found 920 results on 37 pages for 'sp2'.

Page 27/37 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• Is 30 calls / second a lot for one IIS server?

  - by Lieven Cardoen

  We have a RIA application that 300 clients concurrently use in an intranet environment. Together they make 30 calls / second to IIS (asp.net) (actually it's 60 but calls are loadbalanced over two IIS servers). Half of the calls is getting an asset (Caching Profile is used so most of the time cache is hit), the other half is saving data to a sql server. Retrieving an asset is done with a aspx page. Saving the data happens via WebORB, asp.net and Sql Server. So some processing is needed by WebORB (amf decoding, GZIP, ...). We also use Spring.NET, and some of the container objects have a request scope (not a lot). IIS servers -- Virtual machines, 4 CPU, 2 gb RAM. They are based on Windows 2008 x64 SP2 Enterprise Edition. Sql Server 2008 is used. Apparently CPU of both IIS serers is constantly around 60-70%. Now, my question, is the load of 60-70% acceptable and how could we possible bring that down to less % (maybe using only one IIS server)? + Is 2 gb RAM enough? Assets can be up to 20mb, but on average, they are about 30kb. (the load of 60-70% is achieved with assets around 30kb). The data that gets saved with weborb is very small (2kb) and is just one object.

  Read the article

• Make router forward HTTP and HTTPS traffic to external App

  - by cOsticla

  I use a Linksys WRT54GL router with DD-WRT v24-sp2 (10/10/09) std (SVN revision 13064) which I am trying to make forward all HTTP and HTTPS traffic to an external app called Fiddler (used as proxy) on port 8888. After a lot of digging on this site, dd-wrt forum, dd-wrt.com and WWW, I am stacked with the following piece of code that works (thanks to the guys from dd-wrt support for this info), but only for forwarding HTTP traffic (port 80): #!/bin/sh PROXY_IP=1234567890 PROXY_PORT=8888 LAN_IP=`nvram get lan_ipaddr` LAN_NET=$LAN_IP/`nvram get lan_netmask` iptables -t nat -A PREROUTING -i br0 -s $LAN_NET -d $LAN_NET -p tcp --dport 80 -j ACCEPT iptables -t nat -A PREROUTING -i br0 -s ! $PROXY_IP -p tcp --dport 80 -j DNAT --to $PROXY_IP:$PROXY_PORT iptables -t nat -I POSTROUTING -o br0 -s $LAN_NET -d $PROXY_IP -p tcp -j SNAT --to $LAN_IP iptables -I FORWARD -i br0 -o br0 -s $LAN_NET -d $PROXY_IP -p tcp --dport $PROXY_PORT -j ACCEPT I tried to edit the code from above and I came up with the following but it's still not forwarding HTTPS but just HTTP traffic: #!/bin/sh PROXY_IP=1234567890 PROXY_PORT=8888 LAN_IP=`nvram get lan_ipaddr` LAN_NET=$LAN_IP/`nvram get lan_netmask` iptables -t nat -A PREROUTING -i br0 -s $LAN_NET -d $LAN_NET -p tcp -m multiport --dports 80,443 -j ACCEPT iptables -t nat -A PREROUTING -i br0 -s ! $PROXY_IP -p tcp -m multiport --dports 80,443 -j DNAT --to $PROXY_IP:$PROXY_PORT iptables -t nat -I POSTROUTING -o br0 -s $LAN_NET -d $PROXY_IP -p tcp -j SNAT --to $LAN_IP iptables -I FORWARD -i br0 -o br0 -s $LAN_NET -d $PROXY_IP -p tcp --dport $PROXY_PORT -j ACCEPT I am not sure if is possible to forward HTTPS traffic anymore by just using a router so I'd appreciate if somebody will share his thoughts and/or examples regarding this subject here. Thanks!

  Read the article

• IIS FTP error: 426 Connection closed; transfer aborted.

  - by Jiaoziren

  Hi, I have an IIS FTP set up on Windows 2003 SP2 (S1). Everyday in the early morning, a script on another server (S2) will run and initiate FTP transfer of pulling log files from S1 to S2. The FTP client we're using is built-in FTP.exe in Windows 2000 on S2. Recently we replaced S1 with a new server however we kept the IP address. There are multiple IP addresses on new S1. Ever since the new S1 was in place, the '426 Connection closed; transfer aborted.' errors haven been occuring randomly. The log indicated that the transfer started ok however the file cannot be transferred completely, as per log below: mget access*.log 200 Type set to A. 200 PORT command successful. 150 Opening ASCII mode data connection for access02232010.log(205777167 bytes). 426 Connection closed; transfer aborted. ftp: 20454832 bytes received in 283.95Seconds 72.04Kbytes/sec. The firewall monitor suggested that the connection was setup in passive mode however I've been told that MS FTP.exe doesn't support passive mode. Though I can see the response of 'entering passive mode' from server when typing in 'quote pasv'. My network admin has told me to try the transfer in active mode however I don't know how to open active mode on client side. It's getting really frustrating. Wish someone here has the right knowledge/experience could shed me a light. Cheers.

  Read the article

• Windows AD DNS: Event ID 5504

  - by Chris_K

  Two of my AD controllers (both running DNS service) appear to be having a similar issue. Both are throwing lots of events in the DNS events that look like this: Event Type: Information Event Source: DNS Event Category: None Event ID: 5504 Date: 5/24/2010 Time: 11:51:38 AM User: N/A Computer: ALPHA Description: The DNS server encountered an invalid domain name in a packet from 76.74.137.6. The packet will be rejected. The event data contains the DNS packet. That will come with the same event, same time, with a packet from 76.74.137.7 as well. I know this is "Information" not an error, but since it is new and different it bothers me (yes, I fear unexplained change!) Both machines are running Windows 2003 R2 SP2. The DNS servers are not exposed to the internet. Both DNS servers are configured to use OpenDNS for Forwarders. For both servers, this started about a week ago. Any thoughts on: 1) should I be concerned? 2) how can I stop/fix this? To keep it interesting, I have a 3rd AD / DNS box. Same domain, different Active Directory site. Same forwarders, yet doesn't have this issue.

  Read the article

• PDFs and Networked Printers

  - by Bart Silverstrim

  Weird issue. We have users printing to networked windows-shared printers (print server Win2003 sp2). Some users have been reporting recently that they can't print PDF documents to particular printers (two example printers are HP 2430 PCL 6 driver and 4250 PCL 6 driver). At first, we found that on many of these systems the "Everyone" object was added to the permissions for the root of the C: volume but had no permissions checked. We added modify privileges to it (these are Deep-Freeze systems, so modifications to these systems that we don't add as administrators won't matter) and they seemed to be able to print. Perhaps Acrobat Reader was writing a temp file for printing where users didn't have permission, we surmised, and made the change and moved on. Yesterday the user called in saying it's not working still. Looked at it; bring up a PDF, click Print and the reader app says that you have to install a printer. Look at the printers folder (Windows XP workstation), and it has printers installed. Print a test page, return to AcroReader, and it will print fine to that printer. The whole time web pages, MS Office documents, etc. print without issue to the same printers. Has anyone seen this issue with Acro Reader 9 and certain network printer drivers or shares involving HP printers? I'd post this to SuperUser but it seems to be associated with a networked printer issue, seems to affect subsets of users but may be more widespread and our users aren't reporting it to us assuming we just know about it, and I've not found rhyme or reason as to why it's affecting just PDF printing and particular printers. The print spoolers are all running on the workstations and print server without errors being logged so far, but I'm going through the logs now to see if I can find anything out of place.

  Read the article

• Two large, linked Excel files take 30 minutes to save, except in VMWare environment

  - by Gerald L

  I support some tax consultants who love to use Excel when they should probably be using Access. Anyway, they have created two Excel files, A and B. File B has cells linked to file A. File A is 27 MB and file B is 16 MB. One worksheet has roughly 1 million rows and there is another worksheet doing a whole bunch of SUMIF on the 1 million rows. Not the best idea, but whatever. Both Excel files open and recalculate within a reasonable amount of time (1-2 minutes). For a files that large, this is acceptable. Here is the problem: Once you change a cell, and save the file B, it takes a solid 30 minutes to save the file, and the processors are going full speed. I've tried this on 6 different machines, all running Windows XP SP3 with Office 2007 SP2 and all patches. The specs vary from one machine with 512 MB or RAM to a machine with 4 GB of RAM and quad processors. Same result every time. Here is the clincher: If I do this same save operation on a VMWare virtual machine, the file gets saved in 1 minute. I've tried this with my ESX servers at the office, my Mac Fusion at home, and VMWare workstation at the office. It does not matter how much RAM the virtual machine has... it saves in about 1 minute every time. Does anybody have any idea why this is happening and how to fix?

  Read the article

• New router messed up server 2003 setup...

  - by Aceth

  Hey, We were sent a new 2wire router today configured it as best we can to match the old bt voyager. We've also got X static IP's. We've manage to get our webserver on one of the new IP's public facing. then we use a hardware firewall which is in a DMZ again with a different static IP. This firewall then is our gateway for our internal LAN. with a few servers etc. The problem we're having is only our PDC (primary Domain controller which has exchange 2003 on) can't ping externally even an external IP. We've connected laptops to the 2wire router and obtain a private ip 192.168.1.X and it works fine can ping etc. our other servers with an internal ip behind the firewall can ping out fine. We've connected to the firewalls logging console and the pings from the server are allowed through so its fine there. The server in question is a Windows server 2003 R2 Enterprise SP2 + Exchange 2003 Server doesn't have firewall turned on. it has static private IP .. gateway is pointing to the right one External Static IP is routing fine inwards We've ran out of ideas .. help??

  Read the article

• New AD-DC in a new Site is refusing cross-site IPv4 connections

  - by sysadmin1138

  We just added a new Server 2008 (sp2) Domain Controller in a new Site, our first such config. It's over a VPN gateway WAN (10Mbit). Unfortunately it is displaying a strange network symptom. Connections to the SMB ports (TCP/139 and TCP/445) are being actively refused... if the connection is coming in on pure IPv4. If the incoming connection is coming by way of the 6to4 tunnel those connections establish and work just fine. It isn't the Firewall, since this behavior can be replicated with the firewall turned off. Also, it's actually issuing RST packets to connection attempts; something that only happens with a Windows Firewall if there is a service behind a port and the service itself denies access. I doubt it's some firewall device on the wire, since the server this one replaced was running Samba and access to it from our main network functioned just fine. I'm thinking it might have something to do with the Subnet lists in AD Sites & Services, but I'm not sure. We haven't put any IPv6 addresses in there, just v4, and it's the v4 connections that are being denied. Unfortunately, I can't figure this out. We need to be able to talk to this DC from the main campus. Is there some kind of site-based SMB-level filtering going on? I can talk to the DC's on campus just fine, but that's over that v6 tunnel. I don't have access to a regular machine on that remote subnet, which limits my ability to test.

  Read the article

• MsMpEng.exe (Windows Defender?) uses a lot of CPU at startup and runs two instances on a single core

  - by dlamblin

  I'm using Windows XP Professional SP2 on a single core AMD64 processor, and I've got two instances of MsMpEng.exe starting up when I start up and log in. They use 64MB and 32MB of ram and 140MB and 80MB of virtual memory, and fluctuate around 80% CPU usage for about 5 minutes at start up. They are (I read) associated with Windows Defender, but I'm concerned about: There's two of them, everything I read generally has only one reported. They might be scanning each other, and I want that to stop. They might be getting scanned by avgrsx.exe (AVG Free 8) (uses about 16Mb v ram) They might also be scanning moe.exe (assosciated with ms live mesh, which I'm considering getting rid of) Lastly I have Microsoft Security Essentials. I don't know the process name associated there. The main concern of mine (apart from the double instances) is that these are all trying to prioritize scanning each other at once except maybe moe.exe. This might seem legitimate but is likely a useless drain on resources. Have I made a mistake in having all of these installed, or is there a way to inform them not to do whatever they're doing that's taking about 5+ minutes at start up? [I also have Google Desktop, but I'm keeping that.] Comment if none of this makes sense to you.

  Read the article

• DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

  - by Kev

  I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

  Read the article

• Are applications optimized for XenApp?

  - by damitamit

  Our IT dept are about to deploy virtualized apps using Citrix XenApp. One of these apps will be Dynamics AX 4.0 SP2, a ERP client (which I develop on). They have supposedly reached a roadblock because an external 'Dynamics AX Consultant' has told our IT Dept that Dynamics 4 will not work optimally on Citrix and will run very slow because it is not optimized for Citrix. We have it running in a Test environment now and seems ok. They have been told that the only 'solution' is to upgrade to Dynamics AX 2009 where supposedly this problem as been fixed. (not a small task for my team!) When I heard about this, I was quite surprised. From my brief knowledge of Citrix, I thought it would be application independent. How does the citrix app virtualization work, in that a particular app would work better than others on citrix? Would the speed of the virtualized app not just depend on the resources/network connection the citrix server has? FYI, Dynamics AX is a 3-tier client/server system, so the client will be accessing a AOS application server, which then accesses the database. Please enlighten me :)

  Read the article

• Only one domains not resolving via Windows DNS server at multiple locations, but is at others

  - by Brett G

  I'm having quite a weird issue. Had mail delivery issues to a specific domain. After looking closer, I realized that the DNS for that domain isn't resolving via the in-house Windows 2003 SP2 DNS server. C:\>nslookup foodmix.net Server: DC.DOMAIN.com Address: 10.1.1.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to DC.DOMAIN.com timed-out (DC.DOMAIN.com and 10.1.1.1 are generic values to replace the actual ones) Even if I run this nslookup from the DC.DOMAIN.com server, I get the same result. However, all other requests are working as they should. I tried it on severs at completely separate organizations on different networks(Windows 2003 AD servers). The weird thing is some of these were having the same exact issue. However using public DNS servers work. I have tried clearing the DNS cache, restarting the server, restarting the services, etc. Nothing has worked. One weird event I noticed in the DNS Server Event Logs that might be related is an event ID of 5504 with the following description: The DNS server encountered an invalid domain name in a packet from 192.33.4.12. The packet will be rejected. The event data contains the DNS packet. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. In the data section below, I can see the following mentioned: ns2.webhostingstar.com Which happens to be the nameserver for the domain in question. Several discussion threads and a MS KB have pointed to disabling EDNS. I have done this via "dnscmd /config /enableednsprobes 0" and it has not fixed the issue.

  Read the article

• error creating MS Exchange distribution list: Active directory response: 00000005: SecErr: DSID-031521D0

  - by BabakBani

  We've migrated a client from google apps to an MS Exchange 2010 SP2 on-premise setup. The setup /prepareAD went well, and the software was installed with the Administrator account. We've used the Exchange Management Console to setup mailboxes and had to google up the appropriate workarounds such as going into each users Advanced Security Settings and selecting "include inheritable permissions from this object's parents", and changing their logon-to from specific machines to "all computers" so that they can connect to Outlook Web Access, and in turn so their Outlook 2007-2010 clients can connect to Exchange. Sending and receiving emails are working well. Now that all this is in place, we can create Dynamic Distrubution Lists with no problem, but as soon as we try and create a DISTRIBUTION LIST, either in the EMC or the Exchange PowerShell, we get an error. As the error message in the powershell is more verbose, I include this if anyone can suggest how we remedy this: [PS] C:\Windows\system32new-DistributionGroup -Name 'projects' -SamAccountName 'projects' -Alias 'projects' Active Directory operation failed on DC.cppe.local. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-DistributionGroup], ADOperationException + FullyQualifiedErrorId : 1EA5CD3E,Microsoft.Exchange.Management.RecipientTasks.NewDistributionGroup

  Read the article

• windows 2003 under Hyper-V - can't send/receive ping

  - by glaucon

  I've installed Windows 2003 x64 R2 SP2 under Hyper-V (the Windows Pro 8 edition). I have a NIC configured but I can't move any traffic on it. In particular I can't send or receive Pings. Scoreboard There is a second VM running Ubuntu under the Windows 8 host which is able to send and receive pings from the host O/S . When I try to ping from Windows 2003 guest to Windows 8 host I get 'Request Timed Out'. When I try to ping from Windows 8 host to Windows 2003 guest I get 'Reply from 192.168.10.107 Destination Host Unreachable'. There's no problem pinging from the Ubuntu guest to the Windows 8 host and no problem pinging from the Windows 8 host to the Unbuntu guest. Environment Integration services are installed on Windows 2003. The windows 2003 needs a static IP address of 192.168.10.15. The Windows 2003 ipconfig output looks like this : While the host o/s ipconfig output looks like this : Event Logs The only things I can see in the event logs which is (a) looks signifcant and (b) is not related to the lack of networking is this : I'm not sure if that's significant or not. Hyper-V and NICs When the Windows 2003 guest was first booted it had no NIC; I subsequently added a 'Legacy Network Connector' which I couldn't get Windows 2003 to recognise; I subsequently removed that and added a 'Standard Network Connector' and at least on the surface this works ... only it doesn't. 'Virtual Network Type' is external. Although I've only mentioned ping there's no other evidence of network activity. 'Allow incoming echo request' is enabled on the Windows 2003 guest. HELP ? What else should I look at or do to resolve this problem ? EDIT 1: I should have said that I turned off the firewall on the W2003 server for a while and retested the pings; same result.

  Read the article

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  Hi there, I have had some troubles with this: I received a compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. It was given to me on condition i give her the files back. My plan was to turn this into an Ubuntu Server. It booted up no problems even with the ubuntu live disc. After a normal shutdown(not unpluggin the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks etc. Thus i checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower now boots. It booted into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which i assure work perfectly but not with this tower(i recall it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since i am not using an external Video Card, this is onboard VGA. Thanks!

  Read the article

• SQL 2005 Install completly broken on laptop.

  - by ProfKaos

  My problems started when I set up an exploratory domain controller at home. During that process, I changed the name of my laptop, from 'erisia' to 'erisia-laptop', and this resulted in me losing my admin account on SQL Server 2005 on my laptop. SQL Server seems to store the machine name as part of the user name, so now my local admin account is 'erisia-laptop\brady', which SQL server didn't recognise. I thought I'd cut my losses and just re-install SQL 2005, but the first install was aborted, so I tried a complete uninstall, followed by the new install. The latter didn't work while the former worked way too well. Now every attempt at installing SQL Server 2005 SP2 on my laptop running XP SP3 ends in sadness, with MSXML6 being the cause, because it won't install on this OS version. WTF? Does anyone know what I can do to get SQL 2005 installed? It's the only full admin DB tool I have. SQL 2008 Express that installed with VS 2010 Beta 2 doesn't allow much server admin.

  Read the article

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• Hard drive not correctly recognized on a new Windows 7 installation, but works correctly on Windows XP

  - by david

  I'm having problems configuring a hard disk in a brand new, clean Windows 7 installation. System specs: Hard disk: WD VelociRaptor WD6000HLHX (600 GB, 10000 RPM) Motherboard: Gigabyte Z77X-UD3H BIOS SATA mode set to AHCI (not RAID), with disk connected to SATA0 (6 Gb/s port). Windows 7 Enterprise SP1 64-bit The disk is recognized by the BIOS and is correctly identified, with the name and size correctly reported. Windows recognizes the disk itself and reports the device is functioning correctly, but it doesn't appear in Explorer. Disk Management shows the drive, but incorrectly states that it is uninitialized and has no partitions. If I try to initialize the drive, I get an error saying that "the system cannot find the file specified" (what file?). Before connecting the drive to the new machine, I partitioned and formatted it under Windows XP SP2, creating 2 partitions (MBR, not GPT) and copying over a boatload of data. However, none of this data appears under Windows 7. If I put the disk back into the Windows XP machine, I can access the disk and all of its data. Is it possible to get Windows 7 to correctly recognize the disk without having to erase it and start over? If so, how do I do so? I checked this question, which seems to cover the same issue, but it didn't help.

  Read the article

• Primary zone will not transfer to secondary zone

  - by Matt Beckman

  Using DNS on Windows Server 2008, there is a constant struggle with adding primary and secondary zones. I will add a primary zone to NS1 for a new domain, edit it as needed, and when it's ready add the secondary zone to NS2. However, MOST of the time, the secondary zone remains in an error state, and will never acquire the primary zone data. I have gone back to domains a few weeks after adding them to find out that Windows never propagated the change. Annoying. Anyway, I recently updated SP1 to SP2 thinking this would help, but it hasn't. I added two new domains today, and spent an hour after the secondary zone would just not sync. During that time, the only error in the logs I had seen was for one of them where DNS complained about not being authoritative. In order to eventually resolve the issue, I ended up deleting the primary zone, creating a new primary zone, and hitting "Apply" after each and every field change. For example, after modifying the serial number from "1" to a date appropriate "2010093001", I hit apply, and then the Primary Server (apply), Responsible Person (apply), and finally Name Servers (apply). After I did this, the secondary zone didn't waste any time getting the data. Ideas?

  Read the article

• Mustek 1200 CP driver SFC4.SYS bluescreens with BAD_POOL_HEADER

  - by Slink84

  I have Windows XP SP2. Recently it started bluescreening right after starting up with 'BAD_POOL_HEADER', 0x00000019 error caused by SFC4.SYS driver. After googling for a while I've found out that this is my Mustek's 1200 CP scanner driver. Booting in safe mode and uninstalling it solved the problem... And created another one: now I can't use my scanner. The weird thing is, that it has been working for a while on this PC without any problems. It all started suddenly, and I can't remember installing anything that might have affected it. Reverting to several earlier system restore points didn't help. I've tried re-installing it from the Mustek website, just in case if my copy got corrupted or infected by a virus, but it did not help - it still bluescreens. Also, I've installed Avast and scanned my PC - there were no viruses found. If anyone had such a problem before or has an idea what might have caused it, please help. ED: @Michael Todd: ...try installing on another PC... I've installed it on my friends PC. He has the same OS version, with the latest updates just like mine (he wasn't too happy, even after I've assured him that it is easy to fix by uninstalling that driver :] ). It worked fine - no bluescreens or whatsoever. So I think I've narrowed it down to either BIOS settings, or some wicked driver conflict. Next thing I'm going to try is to re-install XP, or install windows 7. I'm not too happy with a prospect of mucking about with BIOS settings...

  Read the article

• Database problem with MS JET

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  I am migrating a bunch of sites which each use an Access database (or whatever an MDB file is). If I try to load the site, I get the following error: Microsoft OLE DB Provider for SQL Server error '80004005' [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied If I rename the MDB file, I get a complaint that the file does not exist, which makes sense. If the file is named correctly, the site tries to load for about 30 seconds or so, and then just fails with the above message. During this waiting period, I can see a lock file being created (and then at some point removed). The MDB file and it's parent dir have full permissions granted to all users. Given that the lock file is successfully created and removed, I don't think that this is a "real" permission issue. The OS is Windows Server 2003 SP2. I am not sure about much more detail on it's config wrt Access databases. I also don't know what version it is expected to be. VB code in question: set oConn=server.createobject("adodb.connection") DSNtemp="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:\fullPathGoesHere\db\sitedb.mdb" oConn.Open DSNtemp

  Read the article

• Sharepoint/WSS Reporting Services Integration woes

  - by mhollers

  after a number of failed attempts i seem to have successfully installed the Reporting services add-in to my WSS farm. However, I seem to be missing most of the enhanced functionality eg no report library template, no report center site template. the only additional functionality available is the report viewer web part. background: 2 server WSS 3.0 farm with CA (Central admin) WFE (web front end) and reporting services addin installed on 1, and SQL05 SP2 with Reporting services (RS) and all databases installed on other. I have a VM environment set up and have rolled this back and repeated a number of times. I have configured RS within CA and activated 'Report Server INtegration Feature'. Within the 'site settings' I have a 'Reporting Services' heading with a 'manage shared schedules' item/link, not sure if there should be other options? I was of the understanding that to view reports within sharepoint i could either create a new site using the 'report center' template or add a report library to an existing site, neither of which seems available I am at a loss as to what to do, as all online information seems to do with dealing with installation issues/errors, which i seem to have eventually got past

  Read the article

• MSSQLSERVER Will Not Start - Event ID 913 and 1814

  - by ThaKidd

  Hello ServerFault! I need some serious help. I have a major database server down and am scratching my head at how to fix it. The server was hit by rolling black outs last week in Dallas and sense then, Microsoft SQL 2005 SP2 will not start up. I am getting the following errors (both when starting the service and while trying to execute mssqlsrv.exe -c -f -m: Event Type: Error Event Source: MSSQLSERVER Event ID: 913 Could not find database ID 3. Database may not be activated yet or may be in transition. Reissue the query once the database is available. If you do not think this error is due to a database that is transitioning its state and this error continues to occur, contact your primary support provider. Please have available for review the Microsoft SQL Server error log and any additional information relevant to the circumstances when the error occurred. and... Event Type: Information Event Source: MSSQLSERVER Event ID: 1814 Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized. I have tried to rename the tempdb.mdf to tempdb.old with no success. I have checked and have 193 GB of free hard drive space. What else might cause this problem? Could the server need a chkdsk ran on it or do I need to be looking at some area of the database server? Any help is greatly appreciated. Thank you in advance.

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >