Search Results

Search found 940 results on 38 pages for 'st'.

Page 27/38 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • Why doesn't my texture display with this GLSL shader?

    - by Chewy Gumball
    I am trying to display a DXT1 compressed texture on a quad using a VBO and shaders, but I have been unable to get it working. All I get is a black square. I know my texture is uploaded properly because when I use immediate mode without shaders the texture displays fine but I will include that part just in case. Also, when I change the gl_FragColor to something like vec4 (0.0, 1.0, 1.0, 1.0) then I get a nice blue quad so I know that my shader is able to set the colour. It appears to be either the texture is not being bound correctly in the shader or the texture coordinates are not being picked up. However, I can't find the error! What am I doing wrong? I am using OpenTK in C# (not xna). Vertex Shader: void main() { gl_TexCoord[0] = gl_MultiTexCoord0; // Set the position of the current vertex gl_Position = gl_ModelViewProjectionMatrix * gl_Vertex; } Fragment Shader: uniform sampler2D diffuseTexture; void main() { // Set the output color of our current pixel gl_FragColor = texture2D(diffuseTexture, gl_TexCoord[0].st); //gl_FragColor = vec4 (0.0,1.0,1.0,1.0); } Drawing Code: int vb, eb; GL.GenBuffers(1, out vb); GL.GenBuffers(1, out eb); // Position Texture float[] verts = { 0.1f, 0.1f, 0.0f, 0.0f, 0.0f, 1.9f, 0.1f, 0.0f, 1.0f, 0.0f, 1.9f, 1.9f, 0.0f, 1.0f, 1.0f, 0.1f, 1.9f, 0.0f, 0.0f, 1.0f }; uint[] indices = { 0, 1, 2, 0, 2, 3 }; //upload data to the VBO GL.BindBuffer(BufferTarget.ArrayBuffer, vb); GL.BindBuffer(BufferTarget.ElementArrayBuffer, eb); GL.BufferData(BufferTarget.ArrayBuffer, (IntPtr)(verts.Length * sizeof(float)), verts, BufferUsageHint.StaticDraw); GL.BufferData(BufferTarget.ElementArrayBuffer, (IntPtr)(indices.Length * sizeof(uint)), indices, BufferUsageHint.StaticDraw); //Upload texture int buffer = GL.GenTexture(); GL.BindTexture(TextureTarget.Texture2D, buffer); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureWrapS, (float)TextureWrapMode.Repeat); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureWrapT, (float)TextureWrapMode.Repeat); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMagFilter, (float)TextureMagFilter.Linear); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMinFilter, (float)TextureMinFilter.Linear); GL.TexEnv(TextureEnvTarget.TextureEnv, TextureEnvParameter.TextureEnvMode, (float)TextureEnvMode.Modulate); GL.CompressedTexImage2D(TextureTarget.Texture2D, 0, texture.format, texture.width, texture.height, 0, texture.data.Length, texture.data); //Draw GL.UseProgram(shaderProgram); GL.EnableClientState(ArrayCap.VertexArray); GL.EnableClientState(ArrayCap.TextureCoordArray); GL.VertexPointer(3, VertexPointerType.Float, 5 * sizeof(float), 0); GL.TexCoordPointer(2, TexCoordPointerType.Float, 5 * sizeof(float), 3); GL.ActiveTexture(TextureUnit.Texture0); GL.Uniform1(GL.GetUniformLocation(shaderProgram, "diffuseTexture"), 0); GL.DrawElements(BeginMode.Triangles, indices.Length, DrawElementsType.UnsignedInt, 0);

    Read the article

  • MOSSLover Lives On&hellip;

    - by MOSSLover
    A while back, maybe 6 months, I got some bad news about 2010.  Microsoft was removing Office from the MOSS equivalent of 2010, so basically my alias would be obsolete the second 2010 caught on in the community.  I thought about it for some time.  I had some discussions with friends in the community.  I even noticed that the MOSSMan changed his twitter id.  I started my blog around a WSS 3.0 project when I worked for LRS in there St. Louis Office in February/March 2007.  So I think it’s fitting to keep the name, because my community involvement centers around 2007.  My first ever speaking ordeal was at the Kansas City Office Geeks meeting in November of 2007 on Disaster Recovery where about three people attended.  The first user group meeting I ever attended was around the month of June 2007 at the KC .Net User Group about two weeks after my braces were installed.  It’s definitely fitting to say that 2007 paved the way for everything that happened in the past 2/2 1/2 years.  If anyone asks what MOSSLover means I added a description on twitter and I also added my name.  I added my name for other reasons, because I’m sick of people thinking I am the guy in the photo.  Also, I’d like people to recognize me for who I am.  Everyone should expect less of the hat in the upcoming year and more of my hair.  I’ve taken a vow to wear the hat less and less this year.  I am sick of buying hats, plus I want to move forward to gain more self confidence.  The hat does not really help.  I will still wear a t-shirt and jeans in most of my presentations.  That is who I am and it will not change any time soon.  If you expect to see me in a skirt good luck with that as it won’t be happening unless I am forced at gun point.  I hope you guys have a good weekend.  Later all… Technorati Tags: MOSSLover,Cardinal's Hat,Becky Isserman

    Read the article

  • Handling bugs, quirks, or annoyances in vendor-supplied headers

    - by supercat
    If the header file supplied by a vendor of something with whom one's code must interact is deficient in some way, in what cases is it better to: Work around the header's deficiencies in the main code Copy the header file to the local project and fix it Fix the header file in the spot where it's stored as a vendor-supplied tool Fix the header file in the central spot, but also make a local copy and try to always have the two match Do something else As an example, the header file supplied by ST Micro for the STM320LF series contains the lines: typedef struct { __IO uint32_t MODER; __IO uint16_t OTYPER; uint16_t RESERVED0; .... __IO uint16_t BSRRL; /* BSRR register is split to 2 * 16-bit fields BSRRL */ __IO uint16_t BSRRH; /* BSRR register is split to 2 * 16-bit fields BSRRH */ .... } GPIO_TypeDef; In the hardware, and in the hardware documentation, BSRR is described as a single 32-bit register. About 98% of the time one wants to write to BSRR, one will only be interested in writing the upper half or the lower half; it is thus convenient to be able to use BSSRH and BSSRL as a means of writing half the register. On the other hand, there are occasions when it is necessary that the entire 32-bit register be written as a single atomic operation. The "optimal" way to write it (setting aside white-spacing issues) would be: typedef struct { __IO uint32_t MODER; __IO uint16_t OTYPER; uint16_t RESERVED0; .... union // Allow BSRR access as 32-bit register or two 16-bit registers { __IO uint32_t BSRR; // 32-bit BSSR register as a whole struct { __IO uint16_t BSRRL, BSRRH; };// Two 16-bit parts }; .... } GPIO_TypeDef; If the struct were defined that way, code could use BSRR when necessary to write all 32 bits, or BSRRH/BSRRL when writing 16 bits. Given that the header isn't that way, would better practice be to use the header as-is, but apply an icky typecast in the main code writing what would be idiomatically written as thePort->BSRR = 0x12345678; as *((uint32_t)&(thePort->BSSRH)) = 0x12345678;, or would be be better to use a patched header file? If the latter, where should the patched file me stored and how should it be managed?

    Read the article

  • GLSL per pixel lighting with custom light type

    - by Justin
    Ok, I am having a big problem here. I just got into GLSL yesterday, so the code will be terrible, I'm sure. Basically, I am attempting to make a light that can be passed into the fragment shader (for learning purposes). I have four input values: one for the position of the light, one for the color, one for the distance it can travel, and one for the intensity. I want to find the distance between the light and the fragment, then calculate the color from there. The code I have gives me a simply gorgeous ring of light that get's twisted and widened as the matrix is modified. I love the results, but it is not even close to what I am after. I want the light to be moved with all of the vertices, so it is always in the same place in relation to the objects. I can easily take it from there, but getting that to work seems to be impossible with my current structure. Can somebody give me a few pointers (pun not intended)? Vertex shader: attribute vec4 position; attribute vec4 color; attribute vec2 textureCoordinates; varying vec4 colorVarying; varying vec2 texturePosition; varying vec4 fposition; varying vec4 lightPosition; varying float lightDistance; varying float lightIntensity; varying vec4 lightColor; void main() { vec4 ECposition = gl_ModelViewMatrix * gl_Vertex; vec3 tnorm = normalize(vec3 (gl_NormalMatrix * gl_Normal)); fposition = ftransform(); gl_Position = fposition; gl_TexCoord[0] = gl_MultiTexCoord0; fposition = ECposition; lightPosition = vec4(0.0, 0.0, 5.0, 0.0) * gl_ModelViewMatrix * gl_Vertex; lightDistance = 5.0; lightIntensity = 1.0; lightColor = vec4(0.2, 0.2, 0.2, 1.0); } Fragment shader: varying vec4 colorVarying; varying vec2 texturePosition; varying vec4 fposition; varying vec4 lightPosition; varying float lightDistance; varying float lightIntensity; varying vec4 lightColor; uniform sampler2D texture; void main() { float l_distance = sqrt((gl_FragCoord.x * lightPosition.x) + (gl_FragCoord.y * lightPosition.y) + (gl_FragCoord.z * lightPosition.z)); float l_value = lightIntensity / (l_distance / lightDistance); vec4 l_color = vec4(l_value * lightColor.r, l_value * lightColor.g, l_value * lightColor.b, l_value * lightColor.a); vec4 color; color = texture2D(texture, gl_TexCoord[0].st); gl_FragColor = l_color * color; //gl_FragColor = fposition; }

    Read the article

  • Increase Availability for Data Center Virtual Environments

    - by Antoinette O'Sullivan
    With Oracle VM, you can increase availability and add flexibility for data center virtual environments. To get started, take training on Oracle VM Server for x86 and Oracle VM Server for SPARC as appropriate for your systems. You can take these live instructor-led courses from your own desk as a live-virtual event or travel to an education center for an in-class event. The Oracle VM Administration: Oracle VM Server for x86 course, in 3 days, teaches you about creating NFS and iSCI repositories, migration, cloning and exercising high availabillity. In-class events already on the schedule include:  Location  Date  Delivery Language  Zagreb, Croatia  11 November 2013  Croatian  Prague, Czech Republic  21 October 2013  Czech  Ballerup, Denmark  26 August 2013  English  Bordeaux, France  18 September 2013  French  Paris, France  9 October 2013  French  Strasbourg, France  11 September 2013  French  Hamburg, Germany  30 Septemeber 2013  German  Munich, Germany  28 October 2013  German  Budapest, Hungary  9 September 2013  Hungarian  Riga, Latvia  30 September 2013  Latvian  Oslo, Norway  16 September 2013  English  Warsaw, Poland  28 October 2013  Polish  Bucharest, Romania  14 October 2013  English  Istanbul, Turkey  23 December 2013  Turkish  Indonesia, Jakarta  19 August 2013  English  Canberra, Australia  4 November 2013  English  Melbourne, Australia  6 November 2013  English  Sydney, Australia  25 November 2013  English  San Francisco, CA, United States  16 September 2013  English  Roseville, MN, United States  21 October 2013  English  St Louis, MO, United States  11 November 2013  English  Reston, VA, United States  31 July 2013  English  Buenos Aires, Argentina  21 August 2013  Spanish The Oracle VM Server for SPARC: Installation and Configuration course, in 2 days, teaches you about configuring control and service domains, creating guest domains, using virtual disks and networks, and migration. In-class events already on the schedule include:  Location  Date  Delivery Language  Budapest, Hungary  12 September 2013  Hungarian  Prague, Czech Republic  9 September 2013  Czech  Colombes, France  7 October 2013  French  Stuttgart, Germany  28 October 2013  German  Madrid, Spain  5 September 2013  Spanish  Istanbul, Turkey 30 September 2013  Turkish   Petaling Jaya, Malaysia 15 August 2013  English   Singapore 5 August 2013  English   Cnaberra, Australia  12 August 2013 English  Melbourne, Australia  30 October 2013 English  Sydney, Australia  26 August 2013 English To register for a course or to learn more about Oracle's virtualization curriculum, go to http://education.oracle.com/virtualization.

    Read the article

  • Hudson authentication via wget is return http error 302

    - by Rafael
    Hello, I'm trying to make a script to authenticate in hudson using wget and store the authentication cookie. The contents of the script is this: wget \ --no-check-certificate \ --save-cookies /home/hudson/hudson-authentication-cookie \ --output-document "-" \ 'https://myhudsonserver:8443/hudson/j_acegi_security_check?j_username=my_username&j_password=my_password&remember_me=true' Unfortunately, when I run this script, I get: --2011-02-03 13:39:29-- https://myhudsonserver:8443/hudson/j_acegi_security_check? j_username=my_username&j_password=my_password&remember_me=true Resolving myhudsonserver... 127.0.0.1 Connecting to myhudsonserver|127.0.0.1|:8443... connected. WARNING: cannot verify myhudsonserver's certificate, issued by `/C=Unknown/ST=Unknown/L=Unknown/O=Unknown/OU=Unknown/CN=myhudsonserver': Self-signed certificate encountered. HTTP request sent, awaiting response... 302 Moved Temporarily Location: https://myhudson:8443/hudson/;jsessionid=087BD0B52C7A711E0AD7B8BD4B47585F [following] --2011-02-03 13:39:29-- https://myhudsonserver:8443/hudson/;jsessionid=087BD0B52C7A711E0AD7B8BD4B47585F Reusing existing connection to myhudsonserver:8443. HTTP request sent, awaiting response... 404 Not Found 2011-02-03 13:39:29 ERROR 404: Not Found. There's no error log in any of hudson's tomcat log files. Does anyone has any idea about what might be happening? Thanks.

    Read the article

  • Unable to initialize gitosis-init

    - by aunghn
    I was tried to setup git and gitosis for our projects. For the gitosis setup, I'm following this article http://scie.nti.st/2007/11/14/hosting-git-repositories-the-easy-and-secure-way as this is first time using git. I got an issue when I run the gitosis-init. I don't know what happen or how to check. Please help me on what I need to check or do. In fact, I don't even know whether this is a problem as I just started using Linux, git and etc. Reinitialized existing Git repository in /home/git/repositories/gitosis-admin.git/ Reinitialized existing Git repository in /home/git/repositories/gitosis-admin.git/ Traceback (most recent call last): File "/usr/bin/gitosis-init", line 8, in <module> load_entry_point('gitosis==0.2', 'console_scripts', 'gitosis-init')() File "/usr/lib/python2.5/site-packages/gitosis-0.2-py2.5.egg/gitosis/app.py", line 24, in run return app.main() File "/usr/lib/python2.5/site-packages/gitosis-0.2-py2.5.egg/gitosis/app.py", line 38, in main self.handle_args(parser, cfg, options, args) File "/usr/lib/python2.5/site-packages/gitosis-0.2-py2.5.egg/gitosis/init.py", line 140, in handle_args run_hook.post_update(cfg=cfg, git_dir=admin_repository) File "/usr/lib/python2.5/site-packages/gitosis-0.2-py2.5.egg/gitosis/run_hook.py", line 40, in post_update path=os.path.join(generated, 'projects.list'), File "/usr/lib/python2.5/site-packages/gitosis-0.2-py2.5.egg/gitosis/gitweb.py", line 109, in generate_project_list f = file(tmp, 'w') IOError: [Errno 13] Permission denied: '/home/git/gitosis/projects.list.30470.tmp' Thanks in advance.

    Read the article

  • emacs, colors in term-mode

    - by valya
    Hello, I use Emacs and I run bash with M-x term command. There is a problem: colors in the *terminal* buffer aren't the same as in Gnome Terminal, and they are worse (do you need a screen shot?). How can I fix this? This is pretty annoying :-) Thank you! Linux Mint 9 Emacs 23.1.1 x86_64 __________________ /home/valentin/Work/buzzoola/buzzoola/test/vagrant [.../vagrant]$ echo $TERM eterm-color __________________ /home/valentin/Work/buzzoola/buzzoola/test/vagrant [.../vagrant]$ echo $LS_COLORS rs=0:di=01;34:ln=01;36:hl=44;37:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31 ;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31: *.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31 :*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01 ;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jp eg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;3 5:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.p cx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01; 35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm =01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:* .xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00 ;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*. ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:

    Read the article

  • MySQL remote access not working - Port Close?

    - by dave.zap
    I am not able to get a remote connection established to MySQL. From my pc I am able to telnet to 3306 on the existing server, but when I try the same with the new server it hangs for few minutes then returns # mysql -utest3 -h [server ip] -p Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '[server ip]' (110) Here is some output from the server. # nmap -sT -O localhost -p 3306 ... PORT STATE SERVICE 3306/tcp closed mysql ... # netstat -anp | grep mysql tcp 0 0 [server ip]:3306 0.0.0.0:* LISTEN 6349/mysqld unix 2 [ ACC ] STREAM LISTENING 12286 6349/mysqld /DATA/mysql/mysql.sock # netstat -anp | grep 3306 tcp 0 0 [server ip]:3306 0.0.0.0:* LISTEN 6349/mysqld unix 3 [ ] STREAM CONNECTED 3306 1411/audispd # lsof -i TCP:3306 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME mysqld 6349 mysql 10u IPv4 12285 0t0 TCP [domain]:mysql (LISTEN) I am running... OS CentOS release 5.8 (Final) mysql 5.5.28 (Remi) Note: Internal connections to mysql work fine. I have disabled IPtables, the box has no other firewall, it runs Apache on port 80 and ssh no problem. Had followed this tutorial - http://www.cyberciti.biz/tips/how-do-i-enable-remote-access-to-mysql-database-server.html I have bound the IP address in my.cnf user=mysql bind-address = [sever ip] port=3306 I even started over by deleting the mysql folder in my datastore and running mysql_install_db --datadir=/DATA/mysql --force Then recreated all the users as per the manual... http://dev.mysql.com/doc/refman/5.5/en/adding-users.html I have created one test user CREATE USER 'test'@'%' IDENTIFIED BY '[password]'; GRANT ALL PRIVILEGES ON *.* TO 'test'@'%' WITH GRANT OPTION; FLUSH PRIVILEGES; So all I can see is that the port is not really open. Where else might I look? thanks

    Read the article

  • Perl TDS character sets

    - by skiphoppy
    I'm using the FreeTDS driver with DBD::Sybase, connecting to an MS SQL Server. When I query certain values of certain records, I get this error: DBD::Sybase::st fetchrow_arrayref failed: OpenClient message: LAYER = (0) ORIGIN = (0) SEVERITY = (9) NUMBER = (99) Server , database Message String: WARNING! Some character(s) could not be converted into client's character set. Unconverted bytes were changed to question marks ('?'). This seems to happen for records that contain special Windows character-set characters, such as curly quotes, copied and pasted from people's Outlook and Word messages. Unfortunately, I do not have any control of this database; sanitizing the input on the way in is obviously the way to go, but is not available to me. What FreeTDS settings do I need to change to be able to successfully query these records? Additional information: The query works fine from tsql. I only get this error through Perl's DBD::Sybase interface. (Should I test through something else? I don't have the expertise yet to install PHP or Python. I've got jTDS and can use it, but I think that's a completely different implementation, not an interface to FreeTDS.) Adding client charset = UTF-8 to my freetds.conf file results in "Out of memory!" printed to STDERR.

    Read the article

  • Adding tables to a herd in bucardo

    - by Joseph the Dreamer
    Forgive my ignorance, I am a JS programmer given the task to do DB replication using bucardo. I understand the concept of how bucardo works, but setting it up is a bit confusing. The set-up is: Lubuntu Linux Two databases test_master and test_slave, using PostgreSQL Each DB has a table named test, containing 2 columns: id (PK) and test (int) I use pgAdmin3 I have already added them to bucardo's list of databases and added all tables. Table: public.test DB: test_slave PK: id (int4) Table: public.test DB: test_master PK: id (int4) As you see, due to the fact that the DBs are identical, even the schema names are identical. So when I do: bucardo_ctl add herd sample_herd public.test Ok, so it got added to the herd. But this command gets confused which database public.test comes from. So when I add a sync: $ bucardo_ctl add sync sample_sync source=sample_herd targetdb=test_slave type=fullcopy Failed to add sync: DBD::Pg::st execute failed: ERROR: Source and target databases cannot be the same: test_slave at line 118. at line 30. CONTEXT: PL/Perl function "validate_sync" at /usr/bin/bucardo_ctl line 3362. What does it mean that source and target cannot be the same? If it got confused as to which public.test to use as source, how do I differentiate?

    Read the article

  • How to get the permissions right for /dev/raw1394

    - by Mark0978
    I recently upgraded one of my ubuntu machines to Karmic and I'm having trouble getting the permissions of /dev/raw1394 set to 0666. They only thing this machine is used for is recording audio from a firepod which uses /dev/raw1394 via jackd and there are no other FireWire devices connected, so security around this device is not really an issue. If I run as root, everything works as expected, but I have some folks that run the recorder that I don't want to have root access. However, I can't figure out which lines setup the perms I've tied this: /etc/udev/permissions.d/raw1394.rules:raw1394:root:root:0666 And I have this setup (default install) /lib/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEMS=="ieee1394", ENV{COMMENT}="Firewire device $attr{host_id})" /lib/udev/rules.d/75-cd-aliases-generator.rules:# the "path" of usb/ieee1394 devices changes frequently, use "id" /lib/udev/rules.d/75-cd-aliases-generator.rules:ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", \ /lib/udev/rules.d/60-persistent-storage-tape.rules:KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" /lib/udev/rules.d/50-udev-default.rules:# FireWire (deprecated dv1394 and video1394 drivers) /lib/udev/rules.d/50-udev-default.rules:KERNEL=="dv1394-[0-9]*", NAME="dv1394/%n", GROUP="video" /lib/udev/rules.d/50-udev-default.rules:KERNEL=="video1394-[0-9]*", NAME="video1394/%n", GROUP="video" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" And I find these lines in /var/log/syslog Apr 30 09:11:30 record kernel: [ 3.284010] ieee1394: Node added: ID:BUS[0-00:1023] GUID[000a9200c7062266] Apr 30 09:11:30 record kernel: [ 3.284195] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00d0035600a97b9f] Apr 30 09:11:30 record kernel: [ 18.372791] ieee1394: raw1394: /dev/raw1394 device initialized What I can't figure out, is which line actually creates that raw1394 device in the first place. How do you get /dev/raw1394 to have permissions 0666?

    Read the article

  • ISCSI Target Ubuntu

    - by erai
    I'm trying to setup iscsitarget on Ubuntu 12.04 but I can't connect to it. On the windows machine it says Target Error. with no other output. My ietd.conf is Target iqn.2012-06.com.org:virtual_machines.lun Lun 0 Type=fileio,Path=/media/volume0/storlun0.bin When I run iscsiadm -m discovery -t st -p localhost The output is iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 closed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: connection login retries (reopen_max) 5 exceeded iscsiadm: Could not perform SendTargets discovery. dmesg output: [ 3324.804665] iscsi_trgt: Removing all connections, sessions and targets [ 3325.875343] iSCSI Enterprise Target Software - version 1.4.20.3 [ 3325.875415] iscsi_trgt: Registered io type fileio [ 3325.875420] iscsi_trgt: Registered io type blockio [ 3325.875425] iscsi_trgt: Registered io type nullio

    Read the article

  • Openconnect for Cisco VPN doesn't recognize private key file - asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag

    - by Alexander Skwar
    I'm trying to use my Synology DS212 NAS box also act as VPN gateway to my companies VPN. Sadly, they only use Cisco ASA and to complicate stuff even further, we've got to use personal certificates (which is of course more secure, but more complicate to get going…). So I compiled OpenConnect v4.06 from http://www.infradead.org/openconnect/. As a very basic test, I tried to build a connection by manually invoking openconnect, passing along the key and cert files, like so: /lib/ld-linux.so.3 --library-path /opt/lib \ /opt/openconnect/sbin/openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 It fails :( Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Using client certificate '/[email protected]/OU=Company VPN' 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Loading private key failed (see above errors) Loading certificate failed. Aborting. Failed to open HTTPS connection to <ip> Failed to obtain WebVPN cookie When I run the same command with the same cert/key files on a Ubuntu 12.04 box, it works: openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Extra cert from cafile: '/CN=Company AG VPN CA/O=Company AG/L=Zurich/ST=ZH/C=CH' SSL negotiation with <ip> Server certificate verify failed: self signed certificate Certificate from VPN server "<ip>" failed verification. Reason: self signed certificate Enter 'yes' to accept, 'no' to abort; anything else to view: yes Connected to HTTPS on <ip> GET https://<ip>/ […] Well… The error on the NAS is this: 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Any ideas, what's causing this? On Syno, I use OpenConnect 4.06. On Ubuntu, I just compiled and installed to a custom location OpenConnect 4.06 as well. Thanks, Alexander

    Read the article

  • HP Storageworks 448 tape drive input/output error with Ubuntu

    - by Dan D
    I'm trying to set a backup to tape of a machine using flexbackup. However any attempt to write to the tape drive (via either flexbackup or just tar) results in "/dev/st0: Input/output error" The machine seems to recognise the drive (HP Storageworks Ultrium 448) and that there's a tape in it and "mt status" seems to work... "mt -f /dev/st0 rewind" or "erase" throw no errors... root@stor001:/# mt status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x42 (LTO-2). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN root@stor001:/# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVDRAM GSA-4084N Rev: KS02 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 03 Lun: 00 Vendor: HP Model: Ultrium 2-SCSI Rev: S65D Type: Sequential-Access ANSI SCSI revision: 03 "tell" does however root@stor001:/# mt -f /dev/st0 tell /dev/st0: Input/output error Based on a forum post I found, I tried: root@stor001:/# dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 10+0 records in 10+0 records out 10240 bytes (10 kB) copied, 5.0815 s, 2.0 kB/s which gave the person on the forum an error but seems to work for me. If anyone has any suggestions, I'm all ears...

    Read the article

  • mysqld causes high CPU load

    - by Radu
    My mysqld goes to use 99.9% of CPU for variable time (between 2 - 20 minutes), and then goes back to normal 0.1% - 5%. Checked processlist: all is normal, 1 to 20 inserts or updates that last 2 to 5 sec, and about 20 process that are in Sleep Mode (maybe because the scripts don't close the mysql connection, but are they are closed in about 5 - 10 secs, I didn't make the scripts :P but the server was running fine the last 2 years, since is was made): | 15375 | root | localhost | stoc | Query | 0 | NULL | show processlist | | 79480 | pppoe | localhost | pppoe | Sleep | 4 | NULL | NULL | | 79481 | pppoe | localhost | pppoe | Sleep | 4 | NULL | NULL | | 79482 | pppoe | localhost | pppoe | Sleep | 4 | NULL | NULL | | 79483 | pppoe | localhost | pppoe | Query | 0 | init | UPDATE acc SET InputOctets="0", OutputOctets="0", InputPackets="unknown", OutputPackets="User | | 79484 | pppoe | localhost | pppoe | Sleep | 5 | NULL | NULL | | 79485 | pppoe | localhost | pppoe | Sleep | 5 | NULL | NULL | | 79486 | pppoe | localhost | pppoe | Sleep | 5 | NULL | NULL Checked raid, seemns OK: [root@db2]# cat /proc/mdstat Personalities : [raid5] [raid4] [raid1] md0 : active raid1 sdd1[3] sdc1[2] sdb1[0] sda1[1] 136448 blocks [4/4] [UUUU] md1 : active raid5 sdd2[3] sdc2[2] sdb2[0] sda2[1] 12023808 blocks level 5, 256k chunk, algorithm 2 [4/4] [UUUU] md3 : active raid5 sda4[1] sdd4[3] sdc4[2] sdb4[0] 203647488 blocks level 5, 256k chunk, algorithm 2 [4/4] [UUUU] md2 : active raid5 sda3[1] sdd3[3] sdc3[2] sdb3[0] 24024576 blocks level 5, 256k chunk, algorithm 2 [4/4] [UUUU] unused devices: <none> [root@db2]# top sees my mysqld cpu load, but nothing else seems to be wrong: [root@db2]# top top - 17:56:05 up 7 days, 3:55, 3 users, load average: 32.93, 24.72, 22.70 Tasks: 75 total, 4 running, 71 sleeping, 0 stopped, 0 zombie Cpu(s): 63.4% us, 36.6% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.0% hi, 0.0% si, 0.0% st Mem: 1988824k total, 1304776k used, 684048k free, 99588k buffers Swap: 12023800k total, 0k used, 12023800k free, 951028k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 5754 mysql 19 0 236m 57m 5108 R 99.9 2.9 21:58.76 mysqld 1 root 16 0 7216 700 580 S 0.0 0.0 0:00.39 init 2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 Repaired all mysql databases, reindexed raid ... I'm running out of ideeas ... Anyone has an ideea what can go wrong with this server ? Thank you

    Read the article

  • Backing up VMs to a tape drive

    - by Aljoscha Vollmerhaus
    I've got myself one of these fancy tape drives, HP LTO2 with 200/400 GB cartridges. The st driver reports it like this: scsi 1:0:0:0: Sequential-Access HP Ultrium 2-SCSI T65D I can store and retrieve files like a charm using tar, both tar cf /dev/st0 somedirectory and tar xf /dev/st0 work flawless. However, what I really would like to backup are LVM LVs. They contain entire virtual machines with varying partition layouts, so using mount and tar is not an option. I've tried using something like dd if=/dev/VG/LV bs=64k of=/dev/st0 to achieve this, but there seem to be various problems associated with this approach. Firstly, I would like to be able to store more than 1 LV on a single tape. Now I guess I could seek to concatenate the data on the tape, but I think this would not work very well in an automated scenario with many different LVs of various sizes. Secondly, I would like to store a small XML file along with the raw data that contains some information about the VM contained in the LV. I could dump everything to a directory and tar it up - not very desirable, I would have to set aside huge amounts of scratch space. Is there an easier way to achieve this? Thirdly, from googling around it seems like it would be wise to use something like mbuffer when writing to the tape, to prevent what wikipedia calls "shoe-shining" the tape. However, I can't get anything useful done with mbuffer. The mbuffer man page suggests this for writing to a tape device: mbuffer -t -m 10M -p 80 -f -o $TAPE So I've tried this: dd if=/dev/VG/LV | mbuffer -t -m 10M -p 80 -f -d 64k -o /dev/st0 Note the added "-d 64k" to account for the 64k block size of the tape. However, reading data back from a tape written in this way never seems to yield any useful results - dd has been running for ages now, and managed to transfer only 361M of data from the tape. What's wrong here?

    Read the article

  • PHP running too slow, always showing "504 Gateway Time-out"

    - by komase
    PHP running too slow, always showing "504 Gateway Time-out" My server spec: Dual core ATOM 330 CPU 2GB RAM Use nginx with PHP in fastcgi use eaccelerator CPU 74.3%id RAM used: 350MB of 2GB I have lots of sites in my server, with cron running every minutes all time, even on some minutes, double or triple cron running at same time. All my sites cron is heavy, usually the cron running more than one minutes. my nginx.conf has become too big until nginx refuse to start because too many sites in it. it has been solved by increasing server_names_hash_max_size. Im planning to add more sites in my server Now, opening my website always showing 504 Gateway Time-out. I have tested many eaccelerator and PHP setting, but this 504 Gateway Time-out still happen. the 504 Gateway Time-out will dissappeared when cron is disabled I have no idea: is this because not enough processor power? And what should I do? upgrade my processor? --------added this is top for my CPU just now: Cpu(s): 17.5%us, 3.8%sy, 0.1%ni, 71.6%id, 6.9%wa, 0.1%hi, 0.1%si, 0.0%st

    Read the article

  • I keep losing wireless connection

    - by posfan12
    I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

    Read the article

  • Apache Consuming Resources

    - by Chris Edwards
    Our web server suddenly has been giving us load issues. After I restart Apache the load stays low for a few hours up to a day or so then its back up to around 3.0 until I restart Apache again. Any suggestions on tracking down what is causing this? Thanks! Chris Edwards top - 20:15:05 up 19 days, 10:59, 1 user, load average: 2.11, 2.17, 2.47 Tasks: 532 total, 6 running, 525 sleeping, 0 stopped, 1 zombie Cpu(s): 11.5%us, 0.4%sy, 0.0%ni, 88.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32842656k total, 13185872k used, 19656784k free, 6143740k buffers Swap: 1048568k total, 0k used, 1048568k free, 3515252k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19089 apache 20 0 1912m 1.5g 6584 R 99.6 4.9 71:01.53 /usr/sbin/httpd 21136 apache 20 0 392m 55m 5736 R 95.0 0.2 0:03.45 /usr/sbin/httpd 21139 apache 20 0 374m 38m 5808 S 40.5 0.1 0:04.91 /usr/sbin/httpd 21124 apache 20 0 389m 51m 5948 R 38.9 0.2 0:03.15 /usr/sbin/httpd 21111 apache 20 0 371m 35m 5964 S 18.8 0.1 0:01.22 /usr/sbin/httpd 21127 apache 20 0 375m 39m 5832 S 17.8 0.1 0:01.66 /usr/sbin/httpd 21128 apache 20 0 374m 38m 5792 S 16.2 0.1 0:01.56 /usr/sbin/httpd 21110 apache 20 0 374m 38m 5848 S 15.9 0.1 0:01.02 /usr/sbin/httpd 21113 apache 20 0 374m 38m 5836 S 15.9 0.1 0:02.16 /usr/sbin/httpd 21077 apache 20 0 379m 43m 6408 S 11.0 0.1 0:07.22 /usr/sbin/httpd 21101 apache 20 0 384m 49m 6988 R 5.8 0.2 0:04.47 /usr/sbin/httpd 21112 apache 20 0 374m 38m 5956 R 2.6 0.1 0:01.61 /usr/sbin/httpd

    Read the article

  • saslauthd using too much memory

    - by Brian Armstrong
    Woke up today to see my site slow/unresponsive. Pulled up top and it looks like a ton of saslauthd processes have spun up using about 64m of RAM each, causing the machine to enter swap space. I've never seen this many used on there. top - 16:54:13 up 85 days, 11:48, 1 user, load average: 0.32, 0.50, 0.38 Tasks: 143 total, 1 running, 142 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.3%sy, 0.0%ni, 97.3%id, 0.2%wa, 0.0%hi, 0.0%si, 1.4%st Mem: 1048796k total, 1025904k used, 22892k free, 14032k buffers Swap: 2097144k total, 332460k used, 1764684k free, 194348k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 848 admin 20 0 263m 115m 4840 S 0 11.3 5:02.91 ruby 906 admin 20 0 265m 113m 4828 S 0 11.1 5:37.24 ruby 30484 admin 20 0 248m 91m 4256 S 6 9.0 219:02.30 delayed_job 4075 root 20 0 160m 65m 952 S 0 6.4 0:24.22 saslauthd 4080 root 20 0 162m 64m 936 S 0 6.3 0:24.48 saslauthd 4079 root 20 0 162m 64m 936 S 0 6.3 0:24.70 saslauthd 4078 root 20 0 164m 63m 936 S 0 6.2 0:24.66 saslauthd 4077 root 20 0 163m 62m 936 S 0 6.1 0:24.66 saslauthd 3718 mysql 20 0 312m 52m 3588 S 1 5.1 3499:40 mysqld 699 root 20 0 72744 7640 2164 S 0 0.7 0:00.50 ruby 15701 postfix 20 0 106m 5712 4164 S 1 0.5 0:00.50 smtpd 15702 postfix 20 0 52444 3252 2452 S 1 0.3 0:00.06 cleanup 4062 postfix 20 0 41884 3104 1788 S 0 0.3 125:26.01 qmgr 15683 root 20 0 51504 2780 2180 S 0 0.3 0:00.04 sshd 14595 postfix 20 0 52308 2548 2304 S 1 0.2 0:24.60 proxymap 15483 postfix 20 0 43380 2544 1992 S 0 0.2 0:00.38 smtp 15486 postfix 20 0 43380 2544 1992 S 0 0.2 0:00.36 smtp 15488 postfix 20 0 43380 2540 1992 S 0 0.2 0:00.38 smtp 15485 postfix 20 0 43380 2532 1984 S 0 0.2 0:00.36 smtp 15489 postfix 20 0 43380 2532 1984 S 0 0.2 0:00.40 smtp Wasn't sure what Saslauthd is, Google says it handles plantext authentication. The machine has been sending a lot of email through postfix, so this could be related. Anyone know why so many may have spun up? Are they safe to kill? Thanks!

    Read the article

  • 1GB cached memory - Do I need more RAM?

    - by Martin
    The server runs well but I wonder if I should get more RAM. I only have a few MB of "free" memory and 1.2GB of "cached" memory: free: total used free shared buffers cached Mem: 3945 3893 51 0 28 1216 -/+ buffers/cache: 2648 1296 Swap: 3895 857 3038 I learned that cached memory is used while it's free and not. Is the cached value an indicator for the need of more RAM? cat /proc/meminfo 1 day after flushing the cache: MemTotal: 4040048 kB MemFree: 32844 kB Buffers: 18956 kB Cached: 1249092 kB SwapCached: 161576 kB Active: 3611328 kB Inactive: 189104 kB SwapTotal: 3989496 kB SwapFree: 2894200 kB Dirty: 20520 kB Writeback: 0 kB AnonPages: 2523496 kB Mapped: 217744 kB Slab: 70940 kB SReclaimable: 36756 kB SUnreclaim: 34184 kB PageTables: 99648 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 6009520 kB Committed_AS: 6401716 kB VmallocTotal: 34359738367 kB VmallocUsed: 18852 kB VmallocChunk: 34359719439 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB top: top - 17:20:10 up 112 days, 3:06, 1 user, load average: 1.01, 1.62, 1.48 Tasks: 208 total, 1 running, 207 sleeping, 0 stopped, 0 zombie Cpu(s): 0.6%us, 0.6%sy, 0.0%ni, 97.5%id, 1.3%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 4040048k total, 3953108k used, 86940k free, 16348k buffers Swap: 3989496k total, 1095712k used, 2893784k free, 1235436k cached

    Read the article

  • Terminating multi-mode fiber

    - by murisonc
    I'm looking at the feasibility of terminating multi-mode fiber connections ourselves. We would be using LC connectors. I've done some research and found two different methods. One requires polishing the ends and using epoxy while the other doesn't. I like the idea of not having to polish the ends but there doesn't seem to be much information on quality or ease of use. I've found two vendors (3M and Corning) that offer kits for terminating fiber without polishing or using epoxy. Does anyone have any experience with both methods that can offer some advice? Copper is easy but fiber seems to be a whole different animal. EDIT: After looking into fusion splicing suggested in the answer I've determined it's not for us. It's my understanding that is primarily used for outside plant and is better suited for single mode fiber. It's a good answer but doesn't address the question directly. Some more information about our situation. We will only be terminating multi-mode fiber inside a building and only doing between 4 and 20 pair a year. Hiring an outside person won't work due to our location. There are currently a couple people on-site that can terminate fiber (working for another company and charging large fees) but they can only do ST and SC connectors and we only use LC. So once again does anyone have experience with terminating using both epoxy type connectors and the other type (similar to Corning Unicam)?

    Read the article

  • exim4 redirect mail sent to *@domain1.example.com to *@domain2.example.com

    - by nightcoder
    Current situation: We have a VPS that hosts a website example.org. Exim is configured to work as a smarthost. All emails sent through exim are successfully relayed to another mail server (that is working on example.com). Goal: To forward mail sent to *@example.org to *@example.com, i.e. change the recipient's address from *@example.org to *@example.com. Problem: If I send email to address *@example.org, then it seems exim doesn't change the address, it still relays the message to another mail server but recipient is still *@example.org. Maybe the redirect is not applied for some reason. Configuration and logs: /etc/exim4/update-exim4.conf.conf: dc_eximconfig_configtype='smarthost' dc_other_hostnames='' dc_local_interfaces='' dc_readhost='example.org' dc_relay_domains='example.org' dc_minimaldns='false' dc_relay_nets='0.0.0.0/32' dc_smarthost='example.com::26' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='true' dc_mailname_in_oh='true' dc_localdelivery='maildir_home' /etc/exim4/conf.d/router/999_exim4-config_redirect (created by me): domain_redirect: debug_print = "R: forward for $local_part@$domain" driver = redirect domains = example.org data = [email protected] (for now data is set to a specific address for simplicity and testing) exim log when sending email to [email protected] (should be redirected to [email protected]): 2012-03-20 19:40:07 1SA4ud-0005Dw-7k <= [email protected] U=www-data P=local S=657 2012-03-20 19:40:08 1SA4ud-0005Dw-7k => [email protected] R=smarthost T=remote_smtp_smarthost H=domain2.com [184.172.146.66] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,2.5.4.17=#13053737303932,ST=TX,L=Houston,STREET=Suite 400,STREET=11251 Northwest Freeway,O=HostGator.com,OU=HostGator.com,OU=Comodo PremiumSSL Wildcard,CN=*.hostgator.com" 2012-03-20 19:40:08 1SA4ud-0005Dw-7k Completed So, the address is not changed :( Please help! I'm trying to make it work for half a day already :(

    Read the article

  • High load without explanation

    - by Sebastian
    I have a very high load on my machine and don't know what is responsible or how to find out. On the machine runs a jboss appserver and mysql. Here is a top from the user at peak time: top - 16:23:01 up 101 days, 6:50, 1 user, load average: 23.42, 21.53, 24.73 Tasks: 9 total, 1 running, 8 sleeping, 0 stopped, 0 zombie Cpu(s): 17.2%us, 1.6%sy, 0.0%ni, 80.4%id, 0.1%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 16440784k total, 16263720k used, 177064k free, 151916k buffers Swap: 16780872k total, 30428k used, 16750444k free, 8963648k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 27344 b 40 0 16.0g 6.5g 14m S 169 41.7 1184:09 java 6047 b 40 0 11484 1232 1228 S 0 0.0 0:00.01 mysqld_safe 6192 b 40 0 604m 182m 4696 S 0 1.1 93:30.40 mysqld 7948 b 40 0 84036 1968 1176 S 0 0.0 0:00.07 sshd 7949 b 40 0 14004 2900 1608 S 0 0.0 0:00.03 bash 7975 b 40 0 8604 1044 840 S 0 0.0 0:00.44 top The CPU usage of the java process is normal. The peaks only show up when i deployed a certain web application. Could the resulting network traffic boost the load in such way that i don't see it in top?

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >