Search Results

Search found 7755 results on 311 pages for 'usb cable'.

Page 27/311 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

  - by user93353

  I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

  Read the article

• "Boot Error" message when booting Ubuntu 9.10 from USB sticks (Occurs only on 1 PC)

  - by xeross

  Hey, Since today suddenly both my USB ubuntu installations (2 different USB sticks) try to boot and nothing loads but all I see is a message saying "Boot Error". When I press space it continues booting from the main hard drive. I tried reinstalling ubuntu on the USB stick but same error. This only happens on 1 computer and started happening today, before it worked just fine. Any idea what's causing this ? Regards, Xeross

  Read the article

• Performance of external USB disk with ESXi5

  - by PeterMmm

  I have a new HP DL120 G7 server with ESXi5. One VM is a Win2003 instalation and I have an external USB2.0 drive attached by USB Controller and USB Device. I copy a 4GB file from external USB to server disk. In the VM that takes up to 10 minutes. On a native Win2003 that takes aprox. 3 minutes. I have no explaination for that diference: In any case the bottleneck is the USB connection, much slower than the disks (SAS, RAID1). If the USB connection on the VM would be USB1.1 and not USB2.0 it would take much more time. (The disk performance between server partitions on the VM is correct. - see update) Could be that my native box is extremely fast and the VM is the normal case. ??? Update I try with passtrough and a first run copy the same data in aprox. 7 minutes. Still 2 times slower than the native connection. I also did another messure and the copy between partitions on the same VM takes 3 minutes.

  Read the article

• CentOS 5 installation - GRUB installed on USB drive

  - by John

  Hi. I installed CentOS via unetbootin and USB stick. Unfortunately, I can not now start my system w/o my USB usb drive. Can someone provide me with some information how to fix this? Thanks.

  Read the article

• USB 3.0 Device not detected in Windows 8

  - by Tek

  About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

  Read the article

• all USB "randomly" disconnect and reconnect

  - by teuneboon

  I'm having a weird issue currently: at seemingly random times(although it seems to happen mostly when USB is used a lot, ie downloading + uploading over my WiFi stick or viewing an HD video from my external hard-drive) all my USB devices disconnect and reconnect after a few seconds. This wouldn't be a HUGE problem if I didn't have to rely on my USB for my internet, because now every time this happens my internet, and with it stuff like remote desktop, crashes. I'm running Windows 8 Pro 64 bit with a Gigabyte 990FXA-D3 motherboard. Now the weird thing: I had the same problem with my previous pc, which had a different motherboard(I think it was an Asus M4A785TD-V EVO). I googled a bit and didn't really find anything about this, only found out I could check if something shows up in the Event Viewer, and I get this error there when the USB crashes: "A timeout occurred while waiting for the EHCI host controller Interrupt on Async Advance Doorbell response." If you require any extra information I'm happy to provide it.

  Read the article

• How can I keep a folder synchronized to an external USB hard drive in Ubuntu?

  - by Cesar

  I have a growing music collection which I manually keep in sync with an external USB drive. Sometimes I edit their ID3 tags, add or delete a file in either the hard drive or the USB drive, and I would like to keep those changes synchronized between both. Does Ubuntu has something available that would help me with this scenario? Preferably something easy to use with a UI. Update: To clarify my question, changes may happen on both the local hard drive or the USB drive, so the sync process must be on both directions.

  Read the article

• How do I get my mac to boot from an Ubuntu USB key?

  - by Vinay Gupta

  so if you select "mac" and "usb" on this download page, it gives a series of command line instructions to make a USB key which the MacBook will boot into Ubuntu from. http://www.ubuntu.com/desktop/get-ubuntu/download I've followed them to the letter two or three times on different USB keys, and it doesn't work. There's a very great deal of technical discussion about EFI etc. but this set of instructions seems to suggest it should Just Work, and it doesn't. Help? I'm increasingly unhappy with the more locked-down approach Apple is taking, and I'd quite like to start using Linux with a view to transitioning over to using it as my main operating system, but booting from the CD takes forever, runs slowly and I'm really hoping to get it moving off USB. Can anybody help me?

  Read the article

• How to associate hardware volume control to USB speakers?

  - by Wolfger

  My Xubuntu system recognizes my speakers, and I can change the mixer settings to make them the active sound device, but no matter what I do, the hardware dial will only affect the onboard sound device. generic-usb 0003:046D:0A19.0003: input,hidraw1: USB HID v1.00 Device [ Logitech Logitech Z205 ] on usb-0000:00:1d.1-1/input2 updated to reflect the fact that this was Xubuntu desktop (from Kubuntu install originally) where I had this problem. I was able to easily do this from Ubuntu Natty installation.

  Read the article

• Can I use Ubuntu to write a Windows 7 ISO to USB in Ubuntu?

  - by Salim Fadhley

  I need to create a Windows installation USB drive from an ISO file. I used unetbootin which seems to be the only tool that can write non-linux images. The USB disk boots (sort-of), but it gets stuck at the very first stage. A UNetbootin spash screen that keeps counting-down from ten to 0, and then restarts. The screen looks like this: Is there a way to make Windows boot from a USB image created on Linux?

  Read the article

• Can I use Ubuntu to write a Windows 7 ISO to USB?

  - by Salim Fadhley

  I need to create a Windows installation USB drive from an ISO file. I used UNetbootin which seems to be the only tool that can write non-Linux images. The USB disk boots (sort of), but it gets stuck at the very first stage. A UNetbootin splash screen appears that keeps counting down from 10 to 0, and then restarts. The screen looks like this: Is there a way to make Windows boot from a USB image created on Linux?

  Read the article

• Help me i can't format my usb? i have already tried with mkdosfs and gparted

  - by Mauri Olivares

  I have a MicroSD card in a USB adapter (which plugs into a USB port on my machine, and acts like a USB flash drive). I was using Unetbootin to make this a bootable USB flash drive with Kubuntu. But I needed to cancel while it was working. So I killed the Unetbootin process from the console. Since then, I can't format the MicroSD or delete the folder that Kubuntu made. I have also tried mkdosfs, with no success. I can't mount the drive anymore either? What can I do, to make this drive usable again? Trying to create a new partition table in GParted, as described in Eliah Kagan's answer, does not work. It fails with the error message "imposible crear tabla de particiones" ("unable to create a partition table").

  Read the article

• Can realtek 8192cu usb wireless card be used in ubuntu 12.04 with kernel 3.2.0?

  - by waterloo2005

  I do like the post RTL8188CUS Wireless USB Dongle doesn't work unless I disable wireless security . But when I plug my 8192cu usb wireless card, my computer screen is off. At that time I even can not use Alt SysRq k or Alt SysRq + reisub. I compile the latest driver of 8192cu on ubuntu 12.04 with kernel 3.2.0-34. In RealTek site, I download 8192cu drive which is for Linux Kernel 2.6.18~2.6.38 and Kernel 3.0.8. But now in Ubuntu12.04 my kernel is 3.2.0-34. Every time I plug the usb 8192cu wireless card my system halts. Now I try to blacklist both the system's rtl8192cu driver and the new 8192cu driver I compile, but the system still halts when I plug the usb driver. What about you ? Thanks!

  Read the article

• How do I get my Mac to boot from an Ubuntu USB key?

  - by user11621

  If you select "USB" and "Mac" on this download page, it gives a series of command line instructions to make a USB key which the MacBook will boot into Ubuntu from. I've followed them to the letter two or three times on different USB keys, and it doesn't work. There's a very great deal of technical discussion about EFI etc. but this set of instructions seems to suggest it should just work, but it doesn't. Help? I'm increasingly unhappy with the more locked-down approach Apple is taking, and I'd quite like to start using Linux with a view to transitioning over to using it as my main operating system, but booting from the CD takes forever, runs slowly and I'm really hoping to get it moving off USB. Can anybody help me?

  Read the article

• USB RAM or USB Processer possible

  - by samsol84

  Is USB RAM or USB Processer possible to develop?

  Read the article

• Results Delphi users who wish to use HID USB in windows

  - by Lex Dean

  Results Delphi users who wish to use HID USB in windows HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB Contain a list if keys containing vender ID and Producer ID numbers that co inside with the USB web sites data base. These numbers and the GUID held within the key gives important information to execute the HID.dll that is otherwise imposable to execute. The Control Panel/System/Hardware/Device manager/USB Serial Bus Controllers/Mass Storage Devices/details simply lists the registry data. The access to the programmer has been documented through the API32.dll with a number of procedures that accesses the registry. But that is not the problem yet it looks like the problem!!!!!!!!! The key is info about the registry and how to use it. These keys are viewed in RegEdit.exe it’s self. Some parts of the registry like the USB have been given a windows security system type of protection with a Aurthz.dll to give the USB read and right protection. Even the api32.dll. Now only Microsoft give out these details and we all know Microsoft hate Delphi. Now C users have enjoyed this access for over 10 years now. Now some will make out that you should never give out such information because some idiot may make a stupid virus (true), but the argument is also do Delphi users need to be denied USB access for another ten years!!!!!!!!!!!!. What I do not have is the skill in is assembly code. I’m seeking for some one that can trace how regedit.exe gets its access through Aurthz.dll to access the USB data. So I’m asking all who reads this:- to partition any friend they have that has this skill to get the Aurthz.dll info needed. I find communicating with USB.org they reply when they have a positive email reply but do not bother should their email be a slightly negative policy. For all simple reasoning, all that USB had to do was to have a secure key as they have done, and to update the same data into a unsecured key every time the data is changed for USB developer to access. And not bother developers access to Aurthz.dll. Authz.dll with these functions for USB:- AuthzFreeResourceManager AuthzFreeContext AuthzAccessCheck(Flags: DWORD; AuthzClientContext: AUTHZ_CLIENT_CONTEXT_HANDLE; pRequest: PAUTHZ_ACCESS_REQUEST; AuditInfo: AUTHZ_AUDIT_INFO_HANDLE; pSecurityDescriptor: PSECURITY_DESCRIPTOR; OptionalSecurityDescriptorArray: PSECURITY_DESCRIPTOR; OptionalSecurityDescriptorCount: DWORD; //OPTIONAL, Var pReply: AUTHZ_ACCESS_REPLY; pAuthzHandle: PAUTHZ_ACCESS_CHECK_RESULTS_HANDLE): BOOl; AuthzInitializeContextFromSid(Flags: DWORD; UserSid: PSID; AuthzResourceManager: AUTHZ_RESOURCE_MANAGER_HANDLE; pExpirationTime: int64; Identifier: LUID; DynamicGroupArgs: PVOID; pAuthzClientContext: PAUTHZ_CLIENT_CONTEXT_HANDLE): BOOL; AuthzInitializeResourceManager(flags: DWORD; pfnAccessCheck: PFN_AUTHZ_DYNAMIC_ACCESS_CHECK; pfnComputeDynamicGroups: PFN_AUTHZ_COMPUTE_DYNAMIC_GROUPS; pfnFreeDynamicGroups: PFN_AUTHZ_FREE_DYNAMIC_GROUPS; ResourceManagerName: PWideChar; pAuthzResourceManager: PAUTHZ_RESOURCE_MANAGER_HANDLE): BOOL; further in Authz.h on kolers.com J Lex Dean.

  Read the article

• How to safely remove a USB drive on Windows CE 5.0?

  - by Radu C

  Until today, I assumed that Windows CE was writing everything to disk and I wouldn't end up with a broken FAT16 when I removed the USB stick. Today, I was proven wrong. I use a USB stick to test things on a WinCE 5.0 device. I don't write anything from the app or WinCE to the stick. I just execute my app, and my app reads its settings and pictures from the stick. Today, just this order of operations broke my stick filesystem (and I have to fix it). Is there a way to tell WinCE 5.0 to unmount the stick before I remove it? It sees it as a "Hard Drive", and the tap-and-hold menu has nothing along the lines of "safely remove drive". I'm happy with both code to do this operation and some trick that I didn't find in Windows CE yet. Thank you.

  Read the article

• External SATA drive does not work without the optional USB cable *also* connected

  - by Software Monkey

  I have Vantec NST-260SU external eSATA/USB drive enclosure (which came with an optional separate power supply) connected to a relatively new Windows 7 computer. The drive should work as a SATA drive with either the separate power supply or using a USB cable solely for power. I would prefer to use the external power supply because I have used all my rear USB ports. Now, if I connect both the eSATA and USB cable, then: The drive shows in the BIOS list of AHCI drives (and not in the list of attached USB devices). Everything I can see about it in Computer Management seems to show it as a SATA driver (for example, it shows as "Location 0 (Channel 5, Target 0, Lun 0)" like my other SATA drives (and not "on USB Mass Storage Device" like my USB flash-drives). It seems very fast, very much faster than my USB flash drives. However, if I disconnect the USB cable and attach the power adapter instead, the drive does not show in the BIOS list and cannot be seen by Windows. The power LED on the enclosure is lit, and the drive enclosure becomes warm after running for a bit, so I am sure it is receiving power. Does anyone know if this device requires both the USB and eSATA cable, and if so, why? Or is there possibly something I need to do to reset the enclosure to not need the USB - the install instructions are pretty clear that you must connect the SATA cable before connecting the USB cable in order for the drive to function as SATA, which I am sure I did. PS: I have reviewed the small manual which came with it, which has not been of help.

  Read the article

• Windows 7 unload driver/disconnect usb before restart

  - by brux

  In xp, my Tascam US 122 usb audio interface works fine. On my windows 7 computer the device works, however when i restart/shutdown it hangs at the "shutting down" screen forever. If the usb cable is removed prior to initiating restart/shutdown then everything goes fine, the computer restarts as normal. This is a known problem, running any other driver in compatibility mode doesnt fix the problem. Is there a method I can use to unload the device/drivers so that I dont have to reach round physically and disconnect the cable. Somebody suggested a spdt switch on the cable itself, but I am looking for a simpler method. Surely I can automate the unloading of the device through a script or such? Any ideas are greatly welcomed thanks

  Read the article

• Can I use CAT 6a connectors with 7a cable (and get 6a performance)?

  - by Mr. Flibble

  I'm re-wiring a building and want to get the best cable possible laid - it required re-plastering to make a change to the cables and the cables will be there for the next 10 - 20 years. Currently there appears to be cat 7a cable available but not too much in the way of cat 7a connectors. Also - I won't be using 40Gig hardware in the near future. So, my question: is it possible to use cat 6a connectors / patch panels with cat 7a cable and get the same performance as I would had I used cat 6a cable? Are there any gotchas in trying to do this?

  Read the article

• Linux USB debug connection to LuminaryMicro evaluation board

  - by mikelong

  Hi, I am trying to connect a Stellaris LM3S8962 evaluation kit to a linux host machine. I am using the CodeSourcery G++ for the development toolchain. When I try to run a helloworld example the connection fails with this message: arm-stellaris-eabi-sprite: error: E104. I/O Error communicating with USB Device. arm-stellaris-eabi-sprite: waiting for GDB connection, to pass error along warning: Remote failure reply: E.fatal.E104. I/O Error communicating with USB Device. arm-stellaris-eabi-sprite: error: E002. Not initialized When I connect the evaluation board with the USB cable it seems the device is made available to the system: Mar 24 14:37:16 n6-ws2 kernel: usb 5-2: USB disconnect, address 5 Mar 24 14:37:18 n6-ws2 kernel: usb 5-2: new full speed USB device using uhci_hcd and address 6 Mar 24 14:37:19 n6-ws2 kernel: usb 5-2: configuration #1 chosen from 1 choice Also, it seems that I can connect in some way via the command line tool (but I do get some strange characters): [mlong@n6-ws2 bin]$ ./arm-stellaris-eabi-sprite -i CodeSourcery ARM Debug Sprite (Sourcery G++ 4.4-104) armusb: [speed=] ARMUSB device armusb:///?? - ?? (??) Does anyone have any suggestions I could try? Thanks a lot, Mike

  Read the article

• How do I create a LiveUSB that lets me install any Ubuntu version?

  - by Dariopnc

  What I'd like to do: have Ubuntu installed on a USB drive and from there install any ubuntu version on a hdd. This is kinda different from using usb-creator because I'd like to have a persistent ubuntu install on the USB drive and not upgrade it every 6 months. From there I'd like to be able to install the most recent ubuntu version. I think it's just a matter of configuring ubiquity, but don't know if this is the case and how exactly do this. EDIT: Let's clarify the persistent thing: suppose I have my USB with ubuntu precise on it suppose quantal is out in the wild suppose that I want to install quantal on the hdd of a computer suppose that I want/can use only the USB drive with precise on it I should erase/upgrade precise on the USB drive to quantal and then install it on the hard drive I don't want to touch my ubuntu install on the USB drive, I'd like to be able to install the newer ubuntu version (quantal) on a hdd from another one (precise) on a USB drive I'd better avoid upgrading the installation on the hdd Hope this helps

  Read the article

• Wireless USB keyboard and mouse can wake system, but then receiver is inactive

  - by BlueMonkMN

  I have a Microsoft brand USB device that acts as a receiver for a wireless Microsoft Keyboard and a wireless Mouse. When it's operating normally, there are LEDs on the device indicating Caps Lock, Num Lock and Function Lock, of which the latter 2 are usually lit. It is plugged into a Dell Isnpiron 531 with Windows 7 32-bit running on an AMD Athlon 64 X2 Dual Core processor 5000+. When the computer goes to sleep (the power indicator on the main box is flashing), I can wake it by moving the mouse. So far all is good. However, something changed in, I think, the past couple weeks (I suspect due to a Microsoft driver update problem). Before the change, after waking the computer, everything would operate normally as far as I could tell, but now after waking the computer, the receiver has no lights on, and the keyboard and mouse are completely unresponsive (which is odd, considering the mouse woke up the computer). There is a button on the receiver that's supposed to reset the wireless connection and flash the lights while it does so, but it has no effect in this state. It's like the receiver doesn't have power (but how would the system know I moved the mouse, unless the power was on until it woke up?). I have checked the BIOS/CMOS settings or whatever you call them, and did not see anything related to USB in the power management section. I have checked Windows 7 device manager and ensured that all the USB Root Hub devices have the setting unchecked for allowing the USB power to be turned off. Like I said, this was working before, and the only thing I can think of that's changed is applying Windows Updates.

  Read the article

• Windows 7 64bits installation via USB asks for drivers

  - by Shikiryu

  I just bought a new config ( ASUS p8z68-v lx, i5-2500k + ram and new graphic card ). Coming back and installing it in my old computer, I just saw that my DVD player was on IDE (yup…). So, I needed to install windows 7 64bits from my usb key. Fine, I made my usb key bootable and copy the official DVD on it (the same version that was on my old computer), set BIOS to boot on it first and started the computer up. It worked fine until it asks me for cd/dvd drivers (which is funny since, I do it via USB because I can't plug in my DVD player :D) I have 3 SATA HDD plugged in and that's it. I made a small google search and found that it could be SATA or RAID drivers. Fine, I took another USB KEY and put all my motherboard drivers on it (from the CD sold with the MB) and none of those drivers seemed to work. I tried downloading new drivers from ASUS website and same effect. Any idea but no "buy a new DVD player", I'm now broke for the month :) ?

  Read the article

• I have a password protected USB drive with hidden partition, how to convert to normal USB drive?

  - by deddebme

  I have a generic USB drive which has password protection, and I want to stop this password protection mechanism and to use it as a normal 8GB USB drive. I received this USB drive as a gift in Hong Kong, and there was no instruction menu whatsoever, not even the manufacturer name. When I plug the drive in Windows XP, the removable drive comes up as a read only 5.28MB partition with two files. When I try to add or remove any files or formatting it, it will says the drive is write protected. After launching the Login.exe and typed in the password, a 8GB read/writeable partition will be shown, and I'm free to do anything to it. But once after the drive is unplugged and replugged, the same read only partition will still comes out no matter what I did to the hidden partition. Anyone knows about this kind if USB drive? What did the manufacturer do to hide the partition? Is there a way to "low-level" formatting this drive to convert (or revert) it to a normal drive? Before typing in the password: After typing in the password:

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >