Search Results

Search found 25718 results on 1029 pages for 'external hard drive'.

Page 270/1029 | < Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >

  • Vantec NexStar NAS Encloser - Writing large files

    - by peter
    Hi, I have one of these 'Vantec NexStar LX - NST-475LX-BK' drive enclosures. It is a NAS drive. When I write a file to the device using eSata, or a SMB share I cannot write files over 2GB. I think this is because the drive is formatted with FAT32. But when I access the device using FTP it doesn't matter. I can write files of any size. E.g. I wrote one on there last night which was 30GB. Does this make any sense? Why? I guess the most important thing for me is data integrity.

    Read the article

  • How do you passthrough native SATA drives to a guest on ESXi?

    - by John
    I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

    Read the article

  • Mac OS x 10.4 Tiger Will Not Boot

    - by keithbrown38
    My G5 Tower all of a sudden is ONLY booting to the Registration page, the where after you installed the software you are suppose to Register. I cant get it to boot in safe mode, so I am using my usb 2.0 SATA cable to connect my drive to a my macbook pro and I am using (CCC) Disc to Disc Clone and it is copying to my external WD passport drive and that makes a startup disc along with all my info from my drive. My question is was there anything easier and less time consuming than that? Does anyone know why this would happen all of a sudden? Thank You All in Advance for your help and support! Keith B

    Read the article

  • install grub on pendrive containing linux installation, making it system independent

    - by arpit
    i have a win7 system and i want to install debian 6 on usb flash drive. the problem is grub loader. i want to install the grub loader on usb itself, so i can just plug in the pendrive in any computer and boot to deb6. so in effect making the flash drive an independent system. i tried it earlier, but ended up with grub loader needing me to insert the pendrive every time to give me boot options to even boot the win7 system, even though it was on primary hdd. so is there a way to turn the pendrive into full linux system with own boot loader, which can automatically detect os in the system i plug it in and be able to boot any of them. totally, self sufficient and system independent; making the pen drive so that it only needs a host system to run the os it carries. thank you, waiting for replies.

    Read the article

  • prevent OS X from prompting disk initialization/formatting

    - by Just-A-User.A-Superuser
    i have TrueCrypt partition, when i insert it in OS X, it always prompt me to initialize the hard disk. is there a way to prevent os x from detecting uninitialize hard disk? [UPDATE] by the way, as Truecrypt suggested while i'm in Windows, i must make partitions so the os won't detect the hard drive as uninitialized. Windows respected that the drive already have contents by the mere fact that it has partitions, while OS X thinks that it is still uninitialized. i think OS X is trying to be smart by detecting if each partition has a valid filesystem id/marker

    Read the article

  • Losing partitions after every reboot

    - by Winston Smith
    I have an Acer laptop with one hard disk, which up until yesterday had 4 partitions: Recovery Partition (13GB) C: (140GB) D: (130GB) OEM Partition (10GB) I read that the OEM partition has all the stuff needed to restore the laptop to the factory settings, but since I'd already created restore disks and I needed the space, I wanted to get rid of it. Yesterday, I used diskpart to do that. In diskpart, I selected the OEM partition and issued the delete partition override command which removed it. Then I extended the D: partition into the unused space using windows disk management. Everything worked fine, until I rebooted my laptop, at which point the D: drive vanished. Looking in windows disk management again, I can see that there's an OEM partition of 140GB, which is obviously my D: drive. So I used EASEUS Partition Master and assigned a drive letter to the 'OEM' partition and I was able to access my files again. However, every time I reboot, it reverts back. How do I fix this permanently?

    Read the article

  • Resizing mysterious partition written by DDing an ISO file

    - by Jon
    I downloaded clonezilla and then wrote it to a USB flash drive with this: dd if=clonezilla.iso of=/dev/sdb I've confirmed that the system boots and clonezilla runs from the flash drive. I want to store a clonezilla backup on the same flash drive clonezilla is running on, but I tried it and ran out of space, so I started looking at how to resize the mysterious partition type that was generated from the ISO. fdisk -l /dev/sdb .... Device Boot Start End Blocks Id System /dev/sdb1 * 1 111 113664 17 Hidden HPFS/NTFS .... I've tried using ntfsresize from the Debian ntfsprogs package. I'm trying gparted next, but thought I'd ask here if anyone knows a neat way to resize a partition created on flash from a liveCD image. Thanks in advance Jon ps. Assume Debian 6 please.

    Read the article

  • broken partition possible for recovery?

    - by claw
    I was using copywipe on hirens boot cd to copy a Windows installation to a new drive. unfortunately for me, I was rushing, I set the source drive as the USB drive running hiren/copywipe to the Windows partition, I think it has destroyed the partition tables and replaced with hiren boot USB ones. disk: was NTFS 40 / 250 partitions disk: now FAT32 145 / 145 partition I have used several partition recovery tools, diskdigger to name one, they all show a recovered partition, but its the hiren stuff. any advice would be a fantastic help To all that have similar issues I recommend using TestDisk (undelete partition) software. you can get this software as part of hirens boot cd. see answer

    Read the article

  • Justifying a memory upgrade, take 2

    - by AngryHacker
    Previously I asked a question on what metrics I should measure (e.g. before and after) to justify a memory upgrade. Perfmon was suggested. I'd like to know which specific perfmon counters I should be measuring. So far I got: PhysicalDisk/Avg. Disk Queue Length (for each drive) PhysicalDisk/Avg. Disk Write Queue Length (for each drive) PhysicalDisk/Avg. Disk Read Queue Length (for each drive) Processor/Processor Time% SQLServer:BufferManager/Buffer cache hit ratio What other ones should I use?

    Read the article

  • HP DL370 G6 expansion

    - by user72185
    Hi, we are running a HP DL370 server with 6 x 300 gb disks on RAID 5. Due to a Windows update causing our server to fail recently, we couldn't access the data. I now want to separate the data from the OS (Windows server 2008 r2) so that if anything like that happens again, we can route everyone through a separate server. I have seen these HP storageworks enclosures (msa70) and have a couple of questions: Can I just take out our 2.5 inch 10k SAS drives, install them in the new Storageworks NAS and hey presto we would be up and running? If I wanted to then add another drive (I think there are 25 bays), can I just insert a blank but identical drive and the RAID 5 would dynamically expand to incorporate the new drive. Many thanks Adrian

    Read the article

  • Viewing and deleting partitions using the BIOS?

    - by cluelesscoder
    I have an M4A785TD-M EVO Asus motherboard which uses Asus Express Gate for its motherboard (says American Megatrends, Inc at the bottom). I activate it by pressing Del; also says Tab activates BIOS Post but that doesn't seem to do anything. I went into this expecting to see a breakdown of the partitions. I have a 300GB hard-drive separated into 3 partitions. While it does show SATA for my main hard-drive and my disk drive, it doesn't show the partitions. Is this typical? Do I have to us an OS-based tool to delete the partitions or can I delete using my BIOS? I tried updating the BIOS through Asus's Update utility but it appears to be broken (connects/disconnects repeatedly). I used HWiNFO32 to get some information: BIOS Date: 06/30/10 BIOS Version: 2103 EFI BIOS: Not Capable Tried to update but it directs me to biosagentsplus.com which wants $30 for the download (another question would be how to avoid them).

    Read the article

  • How can I make Windows XP bootable again?

    - by Scott Severance
    Some time ago, I replaced my hard drive. Foolishly, I imaged the individual partitions, not the entire drive. That meant that my system was unbootable. For my primary OS (Linux), that was no problem as I could simply re-run GRUB. However Windows XP remains unbootable. The machine in question is a netbook which doesn't have a CD drive or a restore partition, so I can't boot from a Windows CD and run fixmbr. How can I fix Windows? Here's a picture of what I see when I try to boot Windows from the GRUB menu: I don't actually have an XP CD, since of my two machines, the netbook in question has neither a restore partition nor a CD, and my other XP machine only came with a restore partition. So I'll also need a way to get hold of the necessary files.

    Read the article

  • Parity Initialization after putting in two new disks

    - by lbanz
    All my firmware is up to date on the server and the controllers. Storage crashed over the weekend. I rebooted it and it detected that I put in two new disks last week (I did check that both disk completed the rebuilding process last week). After it booted into the OS I see that it gave me an information message. After 18 hours it is at 54% so it is looking healthy. But I need to replace 5 more disk in the msa. Should I wait for this message to finish before replacing more disks? 785 Background parity initialization is currently queued or in progress on Logical Drive 1 (15.0 TB, RAID 5). If background parity initialization is queued, it will start when I/O is performed on the drive. When background parity initialization completes, the performance of the logical drive will improve.

    Read the article

  • CentOS - Disk Quota X% warning

    - by jfreak53
    I currently have disk quotas working perfectly for Hard Limit Quotas on a CentOS 5 box. Quotas are working fine, but I am looking for a way to alert users either in a Cron or Automatically as Quotas is already running, when they are within X% of their Hard Limit Quota? I would like this email to go out to an email address I configure somehow for each user. I've looked all over the place but can't find it. All I can find is warnquota which only works when a user goes over Quota. The problem is I use Hard Limits, so my users will never go over quota. It needs to warn them when they are within X% of their limits.

    Read the article

  • Network backup for Macs and PCs - formatting question

    - by neilfein
    I'm trying to use a LaCie 2TB drive as an AirPort drive, for backup on a home network. We have one mac and two PC laptops. My plan is to create a Mac partition and a Windows partition. However, Disk Utility won't let me set the windows partition to Windows format; there's no option in the menu for it in the partition tab. Am I doing something wrong? Alternatively, is there a way to partition the drive with one partition that all three machines can see? We have a Mac G5 with 10.4 and two laptops with Windows 7. Thanks!

    Read the article

  • DDNS Not Creating Journal (Dhcpd and Named)

    - by user130094
    * EDIT 1 * After monkeying with additional debug logging I see some log entries of interest. 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: journal rollforward failed: no more 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: not loaded due to errors. ^^^ If I can remedy the above messages I think I'll be good to go ^^^ * EDIT 2 * Grasping at straws I touched a forward and a reverse zone journal file and restarted named. Boom! Works. Despite documentation stating the files are created automatically and what I have seen before... dunno why but that did the trick. Also re-checked perms on the dir the files live in. As certain as I was, they were correct with named having rw. CentOS 6 (final) dhcpd 4.1.1-P1 named BIND 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6 Basic DHCP and DNS functionality are in place on 192.168.111.2. Clients are assigned addresses as intended and can resolve local DNS names as well as Internet names. My problem is that named's zone journal files are not created. chroot: /var/named/chroot I tried placing the zone files in various directories (/var/named/data, /var/named, /var/named/dynamic - no matter which dir with named owning and wide open perms I now get nowhere). Along the way I, at one point, got a permission denied when named tried to create the journal. Resolved the issue by: chown --recursive named:named /var/named chmod --recursive 777 /var/named The journal was then created and here's where things fell apart. I attempted to tame permissions to something more sane and broke it. Once changed and having restarted named it threw an error indicating the journal was out of sync (or something to that affect)... didn't matter since this is a new setup so I deleted it and now it is not recreated. Now though I see no errors in /var/log/messages, my chrooted /var/log/named.log, or chrooted /var/log/named.debug. I increased the debug level with 'rndc trace' - no love. Increased trace to 10, still nothing. SELinux is disabled... [root@server temp]# sestatus SELinux status: disabled dhcpd.conf... allow client-updates; ddns-update-style interim; subnet 192.168.111.0 netmask 255.255.255.224 { ... key dhcpudpate { algorithm hmac-md5; secret LDJMdPdEZED+/nN/AGO9ZA==; } zone example.lan. { primary 192.168.111.2; key dhcpudpate; } } named.conf... key dhcpudpate { algorithm hmac-md5; secret "LDJMdPdEZED+/nN/AGO9ZA=="; }; zone "example.lan" { type master; file "/var/named/dynamic/example.lan.db"; allow-transfer { none; }; allow-update { key dhcpudpate; }; notify false; check-names ignore; }; The following shows /var/log/named.log output of named starting up - no errors. 27-Jul-2012 21:33:39.349 general: info: zone 111.168.192.in-addr.arpa/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.349 general: info: zone example.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example2.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example3.lan/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.350 general: info: zone example4.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: zone example5.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: managed-keys-zone ./IN/internal: loaded serial 0 27-Jul-2012 21:33:39.351 general: info: zone example.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example1.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example2.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example3.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.353 general: info: managed-keys-zone ./IN/external: loaded serial 0 27-Jul-2012 21:33:39.353 general: notice: running 27-Jul-2012 21:34:03.825 general: info: received control channel command 'trace 10' 27-Jul-2012 21:34:03.825 general: info: debug level is now 10 ...and /var/log/messages for a named start... Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: BIND 9 is maintained by Internet Systems Consortium, Jul 27 23:02:04 server named[9124]: Inc. (ISC), a non-profit 501(c)(3) public-benefit Jul 27 23:02:04 server named[9124]: corporation. Support and training for BIND 9 are Jul 27 23:02:04 server named[9124]: available at https://www.isc.org/support Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: adjusted limit on open files from 4096 to 1048576 Jul 27 23:02:04 server named[9124]: found 2 CPUs, using 2 worker threads Jul 27 23:02:04 server named[9124]: using up to 4096 sockets Jul 27 23:02:04 server named[9124]: loading configuration from '/etc/named.conf' Jul 27 23:02:04 server named[9124]: using default UDP/IPv4 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: using default UDP/IPv6 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: listening on IPv4 interface eth0, 192.168.111.2#53 Jul 27 23:02:04 server named[9124]: generating session key for dynamic DNS Jul 27 23:02:04 server named[9124]: sizing zone task pool based on 12 zones Jul 27 23:02:04 server named[9124]: set up managed keys zone for view internal, file 'dynamic/3bed2cb3a3acf7b6a8ef408420cc682d5520e26976d354254f528c965612054f.mkeys' Jul 27 23:02:04 server named[9124]: set up managed keys zone for view external, file 'dynamic/3c4623849a49a53911c4a3e48d8cead8a1858960bccdea7a1b978d73ec2f06d7.mkeys' Jul 27 23:02:04 server named[9124]: command channel listening on 127.0.0.1#953 What can I do to troubleshoot this further? It almost seems as though dhcpd is not triggering the update. Maybe I should troubleshoot here and, if so, how? Many thanks.

    Read the article

  • Dual boot Windows 8 and Ubuntu?

    - by askvictor
    I've installed Windows 8 on a machine (lenovo x220 laptop) with Ubuntu 12.10 already installed on another disk. I am guessing that Windows 8 has convinced the laptop to switch to UEFI boot (rather than the BIOS boot that was there previously) as the Lenovo splash screen on startup now no longer has the options to interrupt the boot process (e.g. to choose the boot drive). Previously I had Windows 8 on one drive and Ubuntu on the other drive, so could choose my OS through the BIOS rather than through grub or other bootloader but now no longer have that option. How can I get back the option to boot Ubuntu? I would sort of prefer UEFI boot as it seems much faster than BIOS.

    Read the article

  • RAID 1 not performing as expected

    - by Faken
    I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

    Read the article

  • How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

    - by vdavidovski
    I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

    Read the article

  • ubuntu fails to start

    - by miccaman
    I have a laptop with ubuntu 9.10 which fails to start, and I want to copy the data from it to an external hard disk. I can login in recovery mode command line, but then I cannot mount the external hard drive. (in recovery mode I cannot write to the laptops hard drive) If I boot from an portable USB with mintlinux, I can mount the external harddrive, and copy most of the data from the laptop, however there is a dir which I have no rights to access under /home/user/Documents then I get a permission denied error. Are there any other options?

    Read the article

  • Subversion for web designer: repository on a network share and ftp to the live server?

    - by ceatus
    My configuration: htdocs on a windows network share (z:) web developers check out with dreamweaver modify and check in back to the drive z LAMP running on a Ubuntu server virtualized on Hyper-V with apache that point on the z drive for dev in order to test the websites Upload by FTP on the live server Now: I need multiple access to the repository, keep them on a network shares and we manage about 200 websites. All the web developers, administrators and IT need to access to the share. I found out that creating a svn server is the best way for me, so I created it on a Ubuntu Server which is virtualized on Hyper-V. Right now I have the repos local on the Ubuntu Server but I'd like them on my network drive and I'd like to have a post-commit, if possible, in order to ftp directly on my live server. Do you guys think that a WebDav solution would be better? Thanks in advance Angelo

    Read the article

  • Where can I find ready to use windows scripts that used robocopy?

    - by Geo
    We are installing the Windows Resource Kit, and that installs RoboCopy. We want to have access to a few windows scripts that uses RoboCopy so we can start from those to build something else. Any ideas on where I can find a few samples? NOTE 1: A bit of information. Every time we try to copy D drive to E drive (new drive) we get an error that says: ERROR 32 (0x000000020) Copying File d:\pagefile.sys The process cannot access the file because it is being used by another process. Waiting 30 seconds. Just to help figure it out.

    Read the article

  • Missing disk space in Windows XP

    - by Jørn Schou-Rode
    On my mother's Lenovo laptop, Windows XP claims that the hard drive is almost full. According to the properties window, 52.7 out of 55.2 GB is in use: By deleting temp files from Internet Explorer, System Restore, Recycle bin, Windows Update, System Cleanup, I managed to free up about one GB. That's still 50 GB in use, which still is a lot more than I expected. Hence, I gave good old WinDirStat a spin, and here's the output: It might be hard to read here, but the first line says that the total amount of disk space in use on drive C is 24.3 GB. So Windows claims usage of 52.7 GB and WinDirStat can only account for 24.3 GB. Where is the other half of that disk space being used? I hope someone has an answer, or some tricks or tips to do further research. UPDATE: The laptop in question has an SSD hard drive. I am aware that these disk (at least the earlier ones) have a limited life-time. Could the symptoms described be caused by wear and tear on the SSD?

    Read the article

  • How can I guess if a USB cable will power my devices?

    - by rsanchez
    I've had problems with one long (4 meter) USB Mini-B to USB Type-A cable not being able to boot a 2.5'' external hard disc due to not supplying enough current. On top of that, the cable used a Type-A to Mini-B adapter for the Mini-B part, which probably made things worse. Three different shorter cables I got around made the hard disk work without extra current, so it was definitively the cable's fault. However, if I plugged the hard disk to the power, and used the long cable just for data it worked. Here is some related information on powering through USB cables: http://www.girr.org/mac_stuff/usb_stuff.html I have not any long cables that don't have an intermediary Type-A to Mini-B adapter to try them out. My question is: is there a way to guess if a cable will provide enough power for charge/disk drive power? Is it related to the length of the cable, to the build quality of the cable, or the fact that uses intermediary adapters?

    Read the article

  • Mac OS X app window is too large - how can I resize?

    - by Kyle Cronin
    I'm a MacBook user, and when I'm home I plug into a large external monitor to get additional screen space. When I'm on the go I disconnect and use my laptop's built-in display. For the most part this arrangement works very well; however, I occasionally run into an issue where I'll resize an app on the external, causing it to be too large to fit on the built-in screen when I disconnect. Most apps don't have a problem decreasing their height automatically or resizing to fit when I click the green orb, but some (like iTunes) don't want to cooperate. How can I resize apps like iTunes without reconnecting to my external? Here's a screenshot:

    Read the article

< Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >