Search Results

Search found 19365 results on 775 pages for 'machine vision'.

Page 271/775 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

• Windows Server 2008 R2 SP1 Drivers Missing Would Not Install?

  - by bleepzter

  I am building my dev machine with WS2008R2SP1. I consider Windows Server as the best development environment for C# since I tend to focus on server-centric (integration) applications. The desktop flavor of Windows (7) doesn't play nicely with things like Commerce Server or BizTalk... so I to like stick to the environment I develop for. Previously I used to develop inside of VM's but I've found that it is super inefficient and tends to take a toll on the laptops. (I've gone through two of them in 6 months). Problem is that I multiple devices that do not want to be recognized by Windows: My machine is Dell Precision M4500: Intel Core i7-Q740, 1TB HDD, 8GB RAM, Dell re-branded Broadcom DW1501 802x11n Half-Mini Card, Dell re-branded Broadcom DW375 Bluetooh Module, Intel 82577LM Gigabit Network connection NVidia Quadro FX1800 Graphics The devices in question are the Dell rebranded broadcom network and bluetooth adapters: Broadcom USH: USB\VID_0A5C&PID_5800&REV_0101&MI_00 USB\VID_0A5C&PID_5800&MI_00 DW375 Bluetooth Module USB\VID_413C&PID_8187&REV_0517 USB\VID_413C&PID_8187 When I ran the broadcom installers I get "Operating System not supported" which I think is a big oversight on Broadcom's part. Why check for system version string? UGHGHGH Moreover if I try to manually force the driver in windows... I get an error: Driver Management concluded the process to install driver FileRepository\btwampsecfl.inf_amd64_neutral_d8fc2b85d035ed47\btwampsecfl.inf for Device Instance ID USB\VID_0A5C&PID_5800&MI_00\7&66DE6C9&0&0000 with the following status: 0xe0000217. '- or - Driver Management concluded the process to install driver FileRepository\btwampfl.inf_amd64_neutral_d4c4acf036c61299\btwampfl.inf for Device Instance ID USB\VID_413C&PID_8187\90004EEEF5A6 with the following status: 0xe0000217. I googled the 0xe0000217 error code and it says Bad service install section in the driver inf file... Any ideas on how to fix this? I also tried the post by BetaIQ on MSDN Forum, unfortunately the links to the driver package included in the post were dead :( PS. On a side note I also do mobile development for Android, iOS, and Windows Phone, and BB. Having the bluetooth is quite useful with mobile devices.

  Read the article

• HP Storageworks 448 tape drive input/output error with Ubuntu

  - by Dan D

  I'm trying to set a backup to tape of a machine using flexbackup. However any attempt to write to the tape drive (via either flexbackup or just tar) results in "/dev/st0: Input/output error" The machine seems to recognise the drive (HP Storageworks Ultrium 448) and that there's a tape in it and "mt status" seems to work... "mt -f /dev/st0 rewind" or "erase" throw no errors... root@stor001:/# mt status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x42 (LTO-2). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN root@stor001:/# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVDRAM GSA-4084N Rev: KS02 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 03 Lun: 00 Vendor: HP Model: Ultrium 2-SCSI Rev: S65D Type: Sequential-Access ANSI SCSI revision: 03 "tell" does however root@stor001:/# mt -f /dev/st0 tell /dev/st0: Input/output error Based on a forum post I found, I tried: root@stor001:/# dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 10+0 records in 10+0 records out 10240 bytes (10 kB) copied, 5.0815 s, 2.0 kB/s which gave the person on the forum an error but seems to work for me. If anyone has any suggestions, I'm all ears...

  Read the article

• Replace text with spaces in MySQL

  - by javipas

  I'm trying to do a global replace of search in my database, which has a lot of articles with a double carriage return because of this code: <p> </p> I'd like to replace this in my WordPress blog so instead of that appears... nothing, and so I can delete the CR. I've tried this on my database UPDATE wp_posts set post_content = replace (post_content,'<p> </p>',''); but didn't work. Why? Do I have to add special thinks to consider the space between the <p>and the</p>? Mmm. Good points, both Jon Angliss and Wim. Jon, as you could have guessed, the database shows no entries with that text string. So there's something going on inside the post_content field. Wim, the famous   was replaced previously, but there are still hundreds of posts that for some reason have something different between the p and the /p tags. I've done a search of one of the posts with this error: mysql> select * from wp_posts where post_title like '%3DVisionLive%'; And looking in the wp_content field, this is a little piece of the post: Phil Eisler, responsable de la divisi?n 3D Vision.?</p> <p>?</p> <p>Este portal ser? por tanto No spanish tilde (accent) shown on the terminal, and instead of an space there's a quotation mark between the p and the /p tags. I've tried to replace <p>?</p>, but again, no results. There's some character (or several) there, but I don't know how to discover that. Maybe it's the character set of my terminal, but I've accessed the database from phpmyadmin and in that case there's a space character between the p and the /p. Weird.

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• In Windows 7, why can't I use perfmon against a remote server?

  - by SomeGuy

  I am on Windows 7 and trying to run perfmon against Windows 2003 and Windows 2008 servers. I am running into the same issue with all remote machines. When creating a data collector set, I specify a domain account that is in the administrators group on the remote machines (and "Performance Log Users" and "Performance Monitor Users" to be safe). On the "Available Counters" screen, When I type in a remote computer name, PerfMon locks up for a good 2-3 minutes before I can add any counters. I can then save the collector set. However, when I save it, the go/stop buttons are disabled if I click the set in the left panel, and missing if I click the Data collector set itself in the right panel. See the screens below. I can run data collector sets against my local machine with no problem. I am opening perfmon with my local account in both scenarios. I also have Remote Registry Service started on each remote machine. What is going on?

  Read the article

• Persistent static route stops working after VPN drops and reconnects

  - by user76157

  I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can only do dial-out VPN. So I've got a Windows 2008 server on Network B acting as a VPN server (ServerB). Network A's router (RouterA) passes through Network B's router and connects via PPTP to ServerB. RouterA is assigned the static IP 192.168.0.40 on Network B. There's a persistent static route on ServerB telling it to use 0.40 for all requests to Network A's subnet, 192.168.1.0. (route -p add 192.168.1.0 mask 255.255.255.0 192.168.0.40). This enables ServerB to ping all machines on A (and those machines to ping ServerB). The VPN connection occasionally drops (I'm not sure why - it's set to remain always on and seems to drop randomly). This wouldn't be too much of a problem, as it reconnects automatically and quickly, except that when it does reconnect, the static route on ServerB no longer works. Route print (on ServerB) shows that the persistent static route still exists. However a tracert to a machine on Network A doesn't use the static route; it tries instead to use ServerB's default gateway (which is RouterB), and fails to find the machine. Deleting and re-adding the static route fixes the problem - a tracert uses the static route. At the moment, a batch file to delete and re-add the static route is scheduled to run every day. But this is clearly far from an ideal solution! I hope that's not too confusing. Any help would be very much appreciated.

  Read the article

• Routing multiple static IPs from ISP at the cable modem?

  - by Jakobud

  I'm taking over IT responsibilities for a previous IT guy. We have a 50mb cable modem connection from Comcast along with 5 static IP addresses: XXX.XXX.XXX.180 XXX.XXX.XXX.181 XXX.XXX.XXX.182 XXX.XXX.XXX.183 XXX.XXX.XXX.184 We are in the process of replacing our firewall machine. Currently the firewall box is the only thing connected to the cable modem. However the cable modem has multiple ethernet ports on it, similarly to a router. I have assembled a new firewall machine and its time to start testing and configuring it. So that means that I also need it plugged into the cable modem (remember it has multiple ethernet ports on it). So now with multiple computer plugged into the cable modem, how does the cable modem know where to route the traffic? If some request on the internet is made to XXX.XXX.XXX.181, which goes to our cable modem, how does the cable modem know which connected computer that traffic is supposed to be sent? Looking at the web interface for the cable modem, there doesn't seem to be anything special setup on it with regards to routing or NATing IP addresses. Is that because when there is only one computer connected to the modem, all traffic is sent to it by default? Now that I am going to (temporarily) have multiple computers plugged into the cable modem, do I need to specify routing or NAT rules on the modem itself? I am going to speak to Comcast about this next, but I figured I'd ask here first just so I can get a better grasp on how this type of thing generally plays out.

  Read the article

• "A disk read error occurred" when booting XP disk image in VirtualBox

  - by intuited

  I'm trying to boot an XP installation cloned into VirtualBox from a real drive. I'm getting the message A disk read error occurred Press Ctrl+Alt+Del to restart whenever* I try to boot the machine. * This is not strictly true: with AMD-V enabled, the boot process appears to not make it this far and instead hangs at a black screen with cursor. I created the VirtualBox image from the original drive using the following method: $ sudo ddrescue -n /dev/sdd sdd.img logfile # completed without errors $ VBoxManage convertfromraw sdd.img disk.vdi The original disk (and the image) contain a single NTFS partition with XP installed on it. The owner of the drive indicates that it did boot okay the last time the system made it that far. The (Pentium 4) system has a broken (enormous) heat sink, so at some point it failed to boot because it would quickly overheat and shut down. If I boot the VM from a live cd, I am able to mount its /dev/sda1 without any problems. I ran ntfsfix and didn't have any luck. I've read through the instructions on doing this. I didn't really follow them. For example, I didn't run MergeIDE before imaging because the machine was not bootable. However, the symptom of that problem seems to be quite different. The emitted message is contained in the volume boot record of the XP partition, which leads me to suspect that this is a problem with the core operating system bootstrap procedure, and not related to anything in the registry. I don't have an XP boot CD.

  Read the article

• Sending Adobe PDF attachments from Adobe Reader (in Outlook 2003) takes too long

  - by White Island

  I have a customer who is using Outlook 2003 (Microsoft Online Services) and Adobe reader 9+. When they send a PDF from Adobe reader to Outlook (via the Send as attachment to e-mail feature in Adobe), it freezes for 30 seconds to 5 minutes before the new e-mail pops up with the PDF attachment. I'm pretty sure the issue is on the Outlook side of things, as I've tried Adobe reader 8 and Foxit Reader with the same results (Windows XP/7 doesn't seem to make a difference, either). I tried Outlook in safe mode on the first (Win7) machine I was working on, and the e-mail attachment worked a lot faster, but when I tried to replicate the results on another machine, one wouldn't go into safe mode, the other didn't seem to show a difference. In an effort to fix the problem in Outlook normal mode, I tried disabling all add-ins, Com add-in (Office Communicator is the only one), reading pane, Word 2003 as e-mail editor... but none of these seemed to address the issue. Does anyone have any other ideas? I need to get this resolved as soon as possible, and it doesn't seem practical to make them run in safe mode. :P

  Read the article

• ASUS P8B WS - Endless Reboots

  - by tuxGurl

  I am running a Intel XEON 1245 with 4GBx2 Kingston Memory ECC Unbuffered DDR3 on an ASUS P8B WS motherboard. BIOS Version 0904 x64. This system is a little over a month old. It is running Ubuntu 11.10. This evening I found the machine turned off. When I tried to restart it, it would POST and stop at the GRUB screen. When I selected Ubuntu and hit enter within 2-3 seconds the would shutdown and restart. If I stayed at the GRUB screen and did nothing the system would not cut out. I tried booting off a USB stick and again 2-3 seconds after selecting 'Try Ubuntu without Installing' the machine will cut power and reboot. Things I have tried so far: Resetting the BIOS using the on board jumper Resetting the BIOS settings to default Disconnecting all external hardware - except keyboard & monitor Booting with 1 stick of RAM - I tried different single sticks Ensured that onboard EPU and GPU boost switches are in the off position. I am running a Memtest86 right now and it has been running for 38+ minutes. This is not an OS problem or an overheating issue (I have a CoolerMaster HAF Case with 3 fans besides the CPU fan) I am at a loss as to what to try next. I think the BIOS is mis-configured somehow but I don't know what to look for.

  Read the article

• Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

  - by user28930

  I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

  Read the article

• Virtualbox Headless Server on Ubuntu missing VRDP Options

  - by The Daemons Advocate

  I'm running VirtualBox headless server on an Ubuntu 64 bit host, and I want to use it remotely. However, I'm having problems connecting via RDP. The DNS names in my network show the host to be 'server', and the guest to be 'ubuntu-vm'. From the official documentation, I gather that I am to connect to server on the default RDP port in order to see the guest machine. I start the virtual machine like so: vboxheadless -startvm My_VM Then I connect on my laptop, and I get... rdesktop -a 16 server ERROR: server: unable to connect So next I consult the documentation further, and I find there are RDP flags that can be turned on (but should be on implicitly for a headless server). So I pull up information using 'vboxmanage showvminfo My_VM', and I find the VRDP property is off. VRDP Connection: not active To make things even weirder, RDP flag seems to be missing from vboxmanage. I've installed straight from the ubuntu repo's using the virutalbox-ose package, not sure how that measures up against the official docs. For instance, this command doesn't exist: VBoxManage modifyvm My_VM --vrdp on From the UI, the VM's Settings regarding Display have greyed out the 'remote Display' option. What I'm looking for is advice :). I'm open to suggestions that don't involve starting again with something like VMWare. Thanks in advance!

  Read the article

• Dual VGA monitors with Quadro FX 580?

  - by dentrasi

  I have a machine with a Quadro FX 580 card (DVI and two Displayport). Attached to it are two 19" Acer screens, which are both (annoyingly) VGA. The first one works perfectly, with a DVI-VGA adaptor. The second one doesn't work. It's got a VGA cable, which goes into a VGA-DVI converted, which then goes into a DVI-Displayport converter. Initally, I was getting 'Cable Unplugged' on the screen, and it couldn't be seen by Windows or the nVidia control panel. After swapping the VGA-DVI adaptor (which works perfectly on another machine), Windows can now see the monitor. The nVidia panel sees the model and native resolution, but I get a constant 'No Signal' error. Switching to the other Displayport makes no difference. I suspect that the card is seeing a DVI connection plugged into it (nVididaCP shows the monitor as having a DVI connection), and it only sending out a digital signal because of this. Does anyone know of a solution (other than trying to get a Displayport-VGA adaptor), or of a way to force the card to see it as VGA? Thanks, ~Dentrasi

  Read the article

• Windows 7 disk backup and clone for deployment to multiple systems

  - by gregmac

  I'm in the process of deploying some new PCs (there's only 8), all identical hardware. What I'd like to do is install Windows 7 (64bit), join to domain etc, install a bunch of other software, and then clone that drive to multiple other machines. I'd also like to be able to use it as a backup image, so the machine can be restored back to that image at some future date. I understand this involves at least sysprep, but I am confused after reading some tutorials that talk about using Windows Automated Installation Kit, or hacks with the registry and custom-build batch files. This process seems overly complex to me: I did something similar 10+ years ago, and and don't remember it being this bad. Surely things have improved in a decade? There's also some products that involve having network servers running deployment software, network boot, etc etc.. this is way more than I want to set up. My systems are all identical hardware. Is there a simplified way to clone PCs? Preferably (since I'm a lazy developer, and not an IT admin) I'd like to find some off-the-shelf product that I can run after I get the machine setup, that will spit out a bootable DVD I can run on all the other systems, which will boot up, ask for a computer name, join it to the domain, and that's it. Does such as product exist?

  Read the article

• AWS lighttpd: Sending a copy of requests to test.

  - by Martin

  I have a load balanced service on AWS. So the ELB evenly distributes the load across my servers. Each server is running lighttpd that does logging and forwards the requests to my service (on the same machine). I have written a new version of the service. It is installed and running on an EC2 machine test1 (basically a mirror of our current server but the new service running instead of the original) and I have done some preliminary tests that look good. But what I would like to do is mirror a fraction of incoming traffic to the new version of the service so I can do some comparisons between an original version and the new version based on real traffic. Thus I was thinking I could modify one box behind the ELB to duplicate its traffic to the test1. I was thinking I could modify the configuration of lighttpd so that each request is mirrored/duplicated. i.e. the original service keeps responding as before but a mirror request is sent to test1 but the reply is just dropped). Unfortunately I have not been able to work this out. Any ideas on how I could mirror the requests from one box to itself and test1. Or any other ideas for testing.

  Read the article

• Hyper-V Guests Dying

  - by Jon Rauschenberger

  I just hit my THIRD instance of a Hyper-V guest machine dying with the exact same behavior. In all three instances we are hosting WS2008 guests on a WS2008 host. AFter a config change, we reboot the guest and the guest OS comes up but in a very cripled state. Specifically, we are able to log into the guest, but can't launch any apps and the guest never comes active on the network. I opened a support ticket with MS the second time this happened and they focused in on the DCOM subsystem not coming up...best explanation they could provide was that permissions on key system files got corrupted. I eventually gave up on the ticket after close to 10 hours on the phone trying different things that were going no where. What really concerns me is that we have now seen the exact same thing happen to a guest hosted on a completly differet host machine. There is zero hardware overlap between the two. Has anyone seen this before?? It's really odd behavior, but it also seems like there's a pattern here that's concerning me. Thanks, jon

  Read the article

• No Outbound Internet on Windows Home Server

  - by Kyle B.

  Could someone provide some steps for me to check my internet connection on my Windows Home Server? It seems to have intermittent connectivity issues and I am unsure of how to diagnose the problem because it is a headless (no monitor, no keyboard) machine so the only way to get to the device is via remote desktop (which works fine). When connected to the machine, it doesn't pull up any microsoft.com sites and some other sites it does pull up (i.e. gmail.com) and some it doesn't (stackoverflow.com). To make matters more complicated, it has worked intermittently in the past for reasons unknown. Are there tools I can use to properly diagnose the reason for the connection failure? I can ping 127.0.0.1 just fine, I have internet working on my other router-connected machines, so I'm not sure why this one would fail. Any suggestions would be much appreciated and up-voted :) ** edit - thanks for suggestions guys, I'm going to try these tonight and will update my post. ** edit #2 - I hoping this is a more permanant fix, but I have both changed my port on the router as well as restarted the router at the same time. The internet (for the moment) appears to be working. I will be sure to try everything we have discussed should this problem persist. Thanks, Kyle

  Read the article

• How to render remote assistance to a person using Live Messenger?

  - by Cheeso

  There is a feature within Windows Live Messenger v9 that allows a person to ask for remote assistance. BBut as I understand it, this works only if the router is UPnP enabled on both ends. Today I tried this with a friend during an active chat session, and nothing happened. I suspect a router problem. as I am remote, I cannot configure the router for them. What's a good way to render remote assistance? Here's the scenario: it will be based on invitation only (it's not a remote desktop or "logmein" situation). It's a younger person, a computer novice, on the other end of the wire. I'll be assiting with their use of applications on the PC. I'd l ike to be able to SEE the screen, and also use the mouse and keyboard. I have used Ultra-Vnc on the target machine and vncviewer on my machine, on a LAN. It works well. But I don't think I can use that, because it's my kids' computer in my ex-wife's place, and I don't want her to accuse me of spying on her computer. That's why I need it to be invitation only. Advice please. Is there an easy way for me to set up Remote Assistance? IS there some other tool I can use?

  Read the article

• Deploying a Git server in a AWS linux instance

  - by Leroux

  I'm making a git server on my linux instance in AWS. I tried doing it using these instructions but in the end I always get stuck with a "Permission denied (publickey)" message. So here is my detailed steps, the client is my windows machine running mysysgit and the server is the AWS ubuntu instance : 1) I created user Git with a simple password. 2) Created the ssh directory in ~/.ssh 3) On the client I created ssh keys using ssh-keygen -t rsa -b 1024, they got dropped in my /Users/[Name]/.ssh directory, id_rsa and id_rsa.pub key pair was created. 4) Using notepad I copy pasted the text into newly created files on the server in the ~/.ssh directory of my Git user. ~/.ssh/id_rsa and **~/.ssh/id_rsa.pub** were copied. 5) On the server I made the authorized_hosts file using "cat id_rsa.pub authorized_hosts" (while inside the .ssh directory) 6) Now to test it, on my client machine I did ssh -v git@[ip.address] 7) Result : debug1: Host 'ip.address' is known and matches the RSA host key. debug1: Found key in /c/Users/[Name]/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/[Name]/.ssh/identity debug1: Trying private key: /c/Users/[Name]/.ssh/id_rsa debug1: Offering public key: /c/Users/[Name]/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I would appreciate any insight anyone can give me.

  Read the article

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• Ensuring a repeatable directory ordering in linux

  - by Paul Biggar

  I run a hosted continuous integration company, and we run our customers' code on Linux. Each time we run the code, we run it in a separate virtual machine. A frequent problem that arises is that a customer's tests will sometimes fail because of the directory ordering of their code checked out on the VM. Let me go into more detail. On OSX, the HFS+ file system ensures that directories are always traversed in the same order. Programmers who use OSX assume that if it works on their machine, it must work everywhere. But it often doesn't work on Linux, because linux file systems do not offer ordering guarantees when traversing directories. As an example, consider there are 2 files, a.rb, b.rb. a.rb defines MyObject, and b.rb uses MyObject. If a.rb is loaded first, everything will work. If b.rb is loaded first, it will try to access an undefined variable MyObject, and fail. But worse than this, is that it doesn't always just fail. Because the file system ordering on Linux is not ordered, it will be a different order on different machines. This is worse because sometimes the tests pass, and sometimes they fail. This is the worst possible result. So my question is, is there a way to make file system ordering repeatable. Some flag to ext4 perhaps, that says it will always traverse directories in some order? Or maybe a different file system that has this guarantee?

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• Editing a windows XP installation's registry without being able to log in.

  - by Alain

  I've got a windows XP installation that has a corrupt registry. A worm (which was removed) had hijacked the HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon entry (which should have a value of Userinit=C:\windows\system32\userinit.exe When the worm was removed, the corrupt entry was deleted entirely, and now the system automatically logs off immediately after attempting to log in. Regardless of the user and boot mode, no accounts can be logged in to. The only thing required to correct this behavior is to restore the registry key, but I cannot come up with any ways of editing the registry without logging in to an account. I tried remotely connecting to the registry but the required services aren't enabled on the machine. I tried booting on the same machine using the BartPE boot CD but I could not find any way of editing the registry on the C:\Windows installation - running regedit only modifies the X:\I386\ registry in memory. So, what can I use modify the registry of an un-login-able Windows XP instance so that I can log in again? Thanks guys. EDIT: The fix worked. The solution to the auto-logoff problem was, as hoped, to simply add the value mentioned above to the appropriate registry entry. This can be done using the BartPE Boot CD, as described in the accepted answer below, but I used the Offline NT Registry Editor software mentioned in another answer. The steps were: Boot from the NT Registry Editor CD Follow the directions until the appropriate boot sector is loaded. Instead of using one of the default options for modifying passwords or user accounts, type "software" to edit that hive. Type '9' to enter the command line based registry editor. Type "cd Microsoft" (enter) "cd Windows NT" (enter) "cd CurrentVersion" (enter) "cd Winlogon" (enter) Type "nv 1 Userinit" to create a new value under the Winlogon key Type "ev Userinit" to edit the new value, and when prompted, type "C:\windows\system32\userinit.exe" (enter) Type 'q' to quit the registry editor, and as you back out of the system, follow directions to write the hive back to disk. Restart your computer and log in - problem solved. (generic 'warning: back up your registry' disclaimer)

  Read the article

• What used the linux memory? Low cache, low buffer, not a VM

  - by Jason

  First of all, yes, I have read LinuxAteMyRAM, which doesn't explain my situation. # free -tm total used free shared buffers cached Mem: 48149 43948 4200 0 4 75 -/+ buffers/cache: 43868 4280 Swap: 38287 0 38287 Total: 86436 43948 42488 # As shown above, the -/+ buffers/cache: line shows indicates the used memory rate is very high. However, from output of top, I don't see any process used more than 100MB of memory. So, what used the memory? PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 28078 root 18 0 327m 92m 10m S 0 0.2 0:25.06 java 31416 root 16 0 250m 28m 20m S 0 0.1 25:54.59 ResourceMonitor 21598 root -98 0 26552 25m 8316 S 0 0.1 80:49.54 had 24580 root 16 0 24152 10m 760 S 0 0.0 1:25.87 rsyncd 4956 root 16 0 62588 10m 3132 S 0 0.0 12:36.54 vxconfigd 26703 root 16 0 139m 7120 2900 S 1 0.0 4359:39 hrmonitor 21873 root 15 0 18764 4684 2152 S 0 0.0 30:07.56 MountAgent 21883 root 15 0 13736 4280 2172 S 0 0.0 25:25.09 SybaseAgent 21878 root 15 0 18548 4172 2000 S 0 0.0 52:33.46 NICAgent 21887 root 15 0 12660 4056 2168 S 0 0.0 25:07.80 SybaseBkAgent 17798 root 25 0 10652 4048 1160 S 0 0.0 0:00.04 vxconfigbackupd This is an x86_64 machine (not a common-brand server) running x84_64 Linux, not a container in a virtual machine. Kernel (uname -a): Linux 2.6.16.60-0.99.1-smp #1 SMP Fri Oct 12 14:24:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Content of /proc/meminfo: MemTotal: 49304856 kB MemFree: 4066708 kB Buffers: 35688 kB Cached: 132588 kB SwapCached: 0 kB Active: 26536644 kB Inactive: 17296272 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 49304856 kB LowFree: 4066708 kB SwapTotal: 39206624 kB SwapFree: 39206528 kB Dirty: 200 kB Writeback: 0 kB AnonPages: 249592 kB Mapped: 52712 kB Slab: 1049464 kB CommitLimit: 63859052 kB Committed_AS: 659384 kB PageTables: 3412 kB VmallocTotal: 34359738367 kB VmallocUsed: 478420 kB VmallocChunk: 34359259695 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 2048 kB df reports no large consumption of memory from tmpfs filesystems.

  Read the article

• Trouble with local id / remote id configuration of VPN

  - by Lynn Owens

  I have a NetGear UTM firewall and a Windows machine running NetGear's VPN client. The Windows machine I can put on the UTM network and take off of it. When I am cabled into the local (internal) the following configuration works: UTM: Local Id: Local Wan IP: (The UTM's WAN IP address) Remote Id: User FQDN: utm_remote1.com Client: Local Id: DNS: utm_remote1.com Remote Id: (The UTM's WAN IP address) Gateway authentication: preshared key Policy remote endpoint: FQDN: utm_remote1.com But when I'm off the UTM's internal local network and simply coming in from the internet, this does not work. It simply repeats SEND phase 1 before giving up. Since I know that the UTM WAN IP is accessible from both inside and outside the network, I figured the problem was with the Client local id. So, I tried the following: UTM: Local Id: Local Wan IP: (The UTM's WAN IP address) Remote Id: (A DN of a self-signed certificate I created for the client and uploaded into the UTM certificates) Client: Local Id: (The DN of the aforementioned self signed cert) Remote Id: (The UTM's WAN IP address) Gateway authentication: (the aforementioned self signed cert) Policy remote end point: ... er, ... my choices are IP and FQDN.... Not sure what to put here No matter what I've tried, it just keeps repeating the SEND phase 1. Any ideas?

  Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >