Search Results

Search found 8162 results on 327 pages for 'module packaging'.

Page 271/327 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

  • NGINX returning 404 error on a valid url

    - by Harrison
    We have a site that runs PHP-FPM and NGINX. The application sends invitations to site members that are keyed with 40 character random strings (alphanumerics only -- example below). Today for the first time we ran into an issue with this approach. The following url: http://oursite.com/notices/response/approve/1960/OzH0pedV3rJhefFlMezDuoOQSomlUVdhJUliAhjS is returning a 404 error. This url format has been working for 6 months now without an issue, and other urls following this exact format continue to resolve properly. We have a very basic config with a simple redirect to a front controller, and everything else has been running fine for a while now. Also, if we change the last character from an "S" to anything other than a lower-case "s", no 404 error and the site handles the request properly, so I'm wondering if there's some security module that might see something wrong with this specific string... Not sure if that makes any sense. We are not sure where to look to find out what specifically is causing the issue, so any direction would be greatly appreciated. Thanks! Update: Adding a slash to the end of the url allowed it to be handled properly... Would still like to get to the bottom of the issue though. Solved: The problem was caused by part of my configuration... Realized I should have posted, but was headed out of town and didn't have a chance. Any url that ended in say "css" or "js" and not necessarily preceded by a dot (so, for example, http://site.com/response/somerandomestringcss ) was interpreted as a request for a file and the request was not routed through the front controller. The problem was my regex for disabling logging and setting expiration headers on jpgs, gifs, icos, etc. I replaced this: location ~* ^.+(jpg|jpeg|gif|css|png|js|ico)$ { with this: location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { And now urls ending in css, js, png, etc, are properly routed through the front controller. Hopefully that helps someone else out.

    Read the article

  • Error authenticating git repository with Redmine

    - by woni
    I've setup Redmine 2.1 on my Debian Squeeze server following this Tutorial HowTo configure Redmine for advanced git integration (I tried to use the grack path). Redmine server is running properly, but I have a problem granting users access to git repositories. When I try to clone a repository it says: error: The requested URL returned error: 500 while accessing The apache error.log shows this entry: [Fri Sep 28 15:50:56 2012] [crit] [client xx.xx.xx.xx] configuration error: couldn't check user. Check your authn provider!: /repo.git/info/refs It also asks me for user and password when cloning, but it shouldn't if I understand the tutorial right. I'm using the Redmine authentication module: <VirtualHost *:80> ServerName my.server.at DocumentRoot "/var/www/my.server.at/public" PerlLoadModule Apache::Redmine <Directory "/var/www/my.server.at/public"> Options None AllowOverride None Order allow,deny Allow from all </Directory> SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER" SetEnv GIT_PROJECT_ROOT /var/git/my.server.at/ SetEnv GIT_HTTP_EXPORT_ALL ScriptAlias /git/ /usr/lib/git-core/git-http-backend <Location /> Order allow,deny Allow from all AuthType Basic AuthName Git Require valid-user AuthBasicAuthoritative Off AuthUserFile /dev/null AuthGroupFile /dev/null PerlAccessHandler Apache::Authn::Redmine::access_handler PerlAuthenHandler Apache::Authn::Redmine::authen_handler RedmineDSN "DBI:mysql:database=redmine;host=localhost" RedmineDbUser "user" RedmineDbPass "password" RedmineGitSmartHttp yes </Location> </VirtualHost> Can someone help me please and explain the error and what I can do to solve my problem?

    Read the article

  • TCP dies on a Linux laptop

    - by Roman Cheplyaka
    Once in several days I have the following problem. My laptop (Debian GNU/Linux testing) suddenly becomes unable to work with TCP connections to the internet. The following things continue to work fine: UDP (DNS), ICMP (ping) — I get instant response TCP connections to other machines in the local network (e.g. I can ssh to a neighbour laptop) everything is ok for other machines in my LAN But when I try TCP connections from my laptop, they time out (no response to SYN packets). Here's a typical curl output: % curl -v google.com * About to connect() to google.com port 80 (#0) * Trying 173.194.39.105... * Connection timed out * Trying 173.194.39.110... * Connection timed out * Trying 173.194.39.97... * Connection timed out * Trying 173.194.39.102... * Timeout * Trying 173.194.39.98... * Timeout * Trying 173.194.39.96... * Timeout * Trying 173.194.39.103... * Timeout * Trying 173.194.39.99... * Timeout * Trying 173.194.39.101... * Timeout * Trying 173.194.39.104... * Timeout * Trying 173.194.39.100... * Timeout * Trying 2a00:1450:400d:803::1009... * Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable * Success * couldn't connect to host * Closing connection #0 curl: (7) Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable Restarting the connection and/or reloading the network card kernel module doesn't help. The only thing that helps is reboot. Clearly something is wrong with my system (everything else works fine), but I have no idea what exactly. I don't know how to reproduce this, but as I said, it happens every several days. My setup is a wireless router that is connected to the ISP via PPPoE. Any advice?

    Read the article

  • htaccess hacked - i've deleted code and file - what next?

    - by user1762595
    My website was hacked recently. I think i've found the code that was added to the htaccess file, deleted it and then added script to prevent the htaccess file being accessed again. I've also deleted the php file that the hacked code refers to (common.php). What do i need to do next? I'm not a programmer or website developer but i really wanted to see if i could fix the problem myself as i've spent quite a few hours trying and don't give up easily. Here is the hacked code that i deleted; <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_USER_AGENT} (google|yahoo) [OR] RewriteCond %{HTTP_REFERER} (google|yahoo) RewriteCond %{REQUEST_URI} /$ [OR] RewriteCond %{REQUEST_FILENAME} (shtml|html|htm|php|xml|phtml|asp|aspx)$ [NC] RewriteCond %{REQUEST_FILENAME} !common.php RewriteCond /home/httpd/vhosts/bluestardive.com/httpdocs/common.php -f RewriteRule ^.*$ /common.php [L] </IfModule> this code has to stay in the htaccess file as it redirects my url to seo friendly ones or the website errors, but has this code been hacked as well? # Apache search queries statistic module RewriteEngine On AddHandler php5-fastcgi .php .php5 # <contrexx> # <core_modules__alias> RewriteRule ^about-us$ /index.php?page=883 [L,NC] RewriteRule ^ausfluge-und-aktivitaten$ /index.php?page=800 [L,NC] RewriteRule ^bluestardive-news$ /index.php?page=919 [L,NC] RewriteRule ^bookings$ /index.php?page=911 [L,NC] RewriteRule ^diveresort$ /index.php?page=879 [L,NC] RewriteRule ^diving$ /index.php?page=880 [L,NC] RewriteRule ^excursions-and-activities$ /index.php?page=881 [L,NC] RewriteRule ^galerie$ /index.php?section=gallery [L,NC] RewriteRule ^oceannight$ http://www.bluestardive.com/index.php?page=906 [L,NC] RewriteRule ^philosophy$ /index.php?page=846 [L,NC] RewriteRule ^reservation$ /index.php?page=917 [L,NC] RewriteRule ^reservierung$ /index.php?page=918 [L,NC] RewriteRule ^resort$ /index.php?page=798 [L,NC] # </core_modules__alias> # </contrexx> many thanks for any help Claire

    Read the article

  • credit or minclass does not work well with pam_cracklib.so in common-password (opeSuSe 11.3)

    - by Mario
    I'm trying to implement password complexities on my pdc. It's a samba PDC with openLDAP backend. I tried cracklib-check but it looks like that I should have a decent and localize version of password library since the library out there usually comes in english. I also have another consideration that we will allow users to use any kind of password - even though it's dictionary based - as long as their passwords integrated with low/upper alphabet, digits, and other characters such as '$' or '_' (pam_cracklib.so calls them as classes). So here is my /etc/pam.d/common-password: #password requisite pam_pwcheck.so nullok cracklib password requisite pam_cracklib.so minclass=4 reject_username ##password requisite pam_cracklib.so \ ## dcredit=-1 ucredit=-1 lcredit=-1 ocredit=-1 reject_username password optional pam_gnome_keyring.so use_autht_ok password required pam_unix2.so use_authtok nullok The first commented line (with #) was the default configuration of openSuse 11.3. The 2nd/3rd (with leading ##) is another configuration I use when minclass=4 line is commented out. By the way, I have 'check password script' = /usr/local/sbin/crackcheck -d /usr/share/cracklib/pw_dict and passdb backend = ldapsam:ldap://127.0.0.1 parameters in smb.conf and cracklib-check works fine too. So here is the test I conduct. I logon to windows and then change my password. Sometimes it works fine that it trows error message - which what I wanted, but simple password with only lower alphabets can pass windows change password. Maybe I should make a new library which incorporates local vocabularies, but a guy out there (raise your hand please if you read this :) ) also experienced the same trouble with english word. Besides, what we really want is to let user to choose 2 or 3 format password out of 4 classes. Is there a bug or something with pam module in openSuse 11.3? Thank you in advance. Regards, Mario

    Read the article

  • How to define nodes from a Hiera file in Puppet?

    - by Pigueiras
    I am using puppet and the puppet network device management module and I am trying to build my custom type. In the built-in type for the routers configuration, you can specify a list of nodes and then the configuration inside that node: node "c2950.domain.com" { Interface { duplex => auto, speed => auto } interface { "FastEthernet 0/1": description => "--> to end-user workstation", mode => access, native_vlan => 1000 # [...] More configuration } What I am trying to do, is to move the manifest declaration of the nodes and the configuration of my custom type to a Hiera file like this one: nodes: - node1 - node2 config_device: node1: custom_parameter: "whatever1" node2: custom_parameter: "whatever2" And then in the manifest iterate over the hiera file creating the nodes with the configuration of each node with something like (I am taking as reference this question in serverfault): class my_class { $nodes = hiera_array('nodes') define hash_extract() { $conf_hash = hiera_hash("config_device") $custom_paramter = $conf_hash[$name] ## TRICK lies in $name variable node $name { my_custom_device { $name: custom_parameter => $device_conf['custom_parameter'] } } } hash_extract{$pdu_names: } } } But for this solution I have two problems, I can not define a node inside a define and I can not parameterize a node name. So, is there any way to declare nodes from a Hiera file with their configuration inside?

    Read the article

  • Install mod_perl2 on Apache 2.2.14 (Ubuntu10.04)

    - by MICADO
    Hi guys, I have installed via synaptic package ibapache2-mod-perl2. I tried this line in httpd.conf: "LoadModule perl_module modules/mod_perl.so" Apache tells me when I reload the server : "[warn] module perl_module is already loaded, skipping". Well ok, but when i try to look in the browser to a repertory i don't have access .Apache send me the error : Forbidden You don't have permission to access /cgi-bin/ on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.0.10 Port 90 But this should show modperl is installed and that's not the case... I would like my virtual host that follows run with mod_perl2 <VirtualHost v1:80> ServerAdmin webmaster@localhost ServerName v1 DocumentRoot /var/www/v1 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/v1/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www/v1/cgi-bin/ <Directory "/var/www/v1/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> I'd like to know how to configure mod_perl2. Do i have to change something in the apache configuration file to make my cgi repertory works with mod_perl2? Thanks to any help!

    Read the article

  • IIS8 Application request routing

    - by JustDanyul
    Sorry for what is most likely NOT a very intelligent question, but my non-sysadmin brain is struggling to understand what is causing my problem. Basically, I wan't to enable reverse proxying on a IIS8 box. I read though this article: http://www.iis.net/learn/extensions/url-rewrite-module/reverse-proxy-with-url-rewrite-v2-and-application-request-routing And I've installed the ARR extension from here: http://www.iis.net/downloads/microsoft/application-request-routing Now, I enabled the proxying (as explained in the MS tutorial), and I felt the other setting as they where (again, as instructed in the tutorial). My rule looks like the following <rule name="Reverse Proxy to payroll" stopProcessing="true"> <match url="^mytest/(.*)" /> <action type="Rewrite" url="http://localhost:8282/{R:1}" /> </rule> But alas, it doesn't work. If I change it to a "normal" rewrite rule, as in <rule name="Reverse Proxy to payroll" stopProcessing="true"> <match url="^mytest/(.*)" /> <action type="Rewrite" url="/{R:1}" /> </rule> Then it works. So, it must differently be something with the reverse proxy. Any idea what gives?

    Read the article

  • What may be wrong with String::ToIdentifier::EN tests?

    - by wk01
    I try to install Perl module String::ToIdentifier::EN (as depndency of DBIx::Class::Schema::Loader) but it fails on tests. I googled those errors but get no picture, where is problem: Building and testing String-ToIdentifier-EN-0.07 cp lib/String/ToIdentifier/EN.pm blib/lib/String/ToIdentifier/EN.pm cp lib/String/ToIdentifier/EN/Unicode.pm blib/lib/String/ToIdentifier/EN/Unicode.pm Manifying blib/man3/String::ToIdentifier::EN.3pm Manifying blib/man3/String::ToIdentifier::EN::Unicode.3pm PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00_basic.t t/10_ascii.t t/20_capitalization.t Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 25 tests but ran 4. # Looks like your test exited with 25 just after 4. t/00_basic.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 21/25 subtests Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 768 tests but ran 512. # Looks like your test exited with 25 just after 512. t/10_ascii.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 256/768 subtests t/20_capitalization.t .. ok Test Summary Report ------------------- t/00_basic.t (Wstat: 6400 Tests: 4 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 25 tests but ran 4. t/10_ascii.t (Wstat: 6400 Tests: 512 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 768 tests but ran 512. Files=3, Tests=528, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.42 cusr 0.04 csys = 0.55 CPU) Result: FAIL Failed 2/3 test programs. 0/528 subtests failed. make: *** [test_dynamic] Error 255 -> FAIL Installing String::ToIdentifier::EN failed. See /home/wanradt/.cpanm/build.log for details. Byte order is not compatible at... seems a key, but to where?

    Read the article

  • LighTPD and PHP not working if outside of LightTPD folder

    - by Marco83
    I need to set up a simple web server with PHP on Windows XP that a number of different people will use for local testing. I'm using LightTPD 1.4.30-4-IPv6-Win32-SSL and PHP 5.2. So far I've created this folder structure: tools/ LightTPD/ htdocs/ PHP/ I set up PHP as CGI and the document root as server_root + "/htdocs". It works fine (well, it's slow but I don't want to bother with FastCGI for now :) ). My problem is when I try to put the htdocs outside of LightTPD folder, like this: htdocs/ tools/ LightTPD/ PHP/ I update the document root to server_root + "/../../htdocs" and while static HTML pages work fine, PHP pages stop working (they return a "No input file specified"). I literally just change the document root, I didn't change anything in the php.ini or anywhere else. Please also note that I left all doc_root, user_dir and cgi.force_redirect to the default values in php.ini, and it works when htdocs is inside LightTPD, but not when I move it ouside. Any idea of why it's breaking?? Here's my lightTPD.conf: server.modules = ( "mod_access", "mod_accesslog", "mod_alias", "mod_cgi", "mod_status", ) include "variables.conf" include "mimetype.conf" # THIS WORKS server.document-root = server_root + "/htdocs" # THIS DOESN'T #server.document-root = server_root + "/../../htdocs" server.upload-dirs = ( temp_dir ) index-file.names = ( "index.php", "index.pl", "index.cgi", "index.cml", "index.html", "index.htm", "default.htm" ) server.event-handler = "libev" url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } static-file.exclude-extensions = ( ".php", ".pl", ".cgi" ) server.errorlog = server_root + "/logs/error.log" ######### Options that are good to be but not neccesary to be changed ####### dir-listing.activate = "enable" #### CGI module cgi.assign = ( ".php" => server_root + "/../PHP/php-cgi.exe" ) status.status-url = "/server-status" status.config-url = "/server-config"

    Read the article

  • Facter - custom fact, returns empty data set when invoked by Puppet agent

    - by user3684494
    According to this puppet labs article, I can create custom facts from shell scripts. I have created a bash script that returns a single fact, it is packaged in a modules facts.d directory. The module is included on the target system via an ENC class. When invoked by the puppet agent on the target it returns an empty set, when run by hand on the agent it correctly returns the fact. The script has execute permission on the master, but does not have it on the agent. I saw a bug report related to permissions and file types, but that was windows and supposed to be fixed in puppet version 3. What am I doing wrong? ENC definition: --- classes: facttest: Shell script: #!/bin/bash echo "test_fact1=$(hostname)" Permissions: master: -rwxr-xr-x 1 root root ... modules/facttest/facts.d/testfact.sh agent: -rw-r--r-- 1 root root ... /var/lib/puppet/facts.d/testfact.sh Agent message: Fact file /var/lib/puppet/facts.d/testfact.sh was parsed but returned an empty data set Version information: Puppet master: 3.5.1 (Debian) Facter master: 2.0.1 Puppet agent: 3.6.1 (OpenSUSE) Facter agent: 2.0.1

    Read the article

  • MySQL fault linked to windows shutdown failure?

    - by Roy
    As far as i understand my computer is experiencing a strange coincidence (hopefully it isn't and somebody can enlighten me). Basically i shut down my laptop (Windows 7) (at 17.20, today, to be precise) successfully (and so also did XAMPP and its included components). However upon starting my laptop up again in the last hour i noticed that the MySQL module service in my xampp control panel was not coming on (just a big red tick; incidentally everything else was working fine). Now, i had the exact same problem about two weeks ago, whereby i just reinstalled xampp and got it working again. But rather than doing this straight away i thought i would just restart my laptop first. However it won't restart (or shut down first) to be precise now. I can remember Windows wasn't shutting down properly the last time it happened (about two weeks ago). Just wondered if this coincidence pointed to any specific diagnostic as regards the problem with MYSQL? If so i would appreciate greatly any help. Otherwise sorry for wasting your time.

    Read the article

  • SSH hangs when executing command remotely

    - by Serty Oan
    Client : OpenSSH_5.1p1 Debian-5ubuntu1 (Ubuntu 9.04) Server : OpenSSH_5.1p1 Debian-5 (Proxmox 2.6.24-7-pve) I use SSH to execute commands remotely on the server (module check_by_ssh of Nagios). But SSH hangs from time to time when trying to execute commands. I can log to the server via SSH but not executing a simple 'ls'. And it seems to block from all clients from the same IP address. Authentication is not the problem, may it be made by SSH keys or password. ssh -l root -p 2222 server.domain.tld 'ls' Here the client debug info debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR *** skipping approx 40 env var ignored debug1: Sending command: ls debug2: channel 0: request exec confirm 1 It hangs there. Then after a random time, it works again (without doing anything). Killing all sshd process on the server seems to work too. It works from a Putty. I saw that some people had trouble like this due to ISP reverse DNS problem, but it does not seem to be the case here. It can work for hours and then not work for half an hour or so. What could explain this behaviour ?

    Read the article

  • 3dmark score abnormal

    - by Sean
    I just bought a new laptop. It is core i7 3610QM.(Ivy bridge, 4 core plus hyperthreading), 8G ram, nvidia GT 610M 2GB. The OS is Win7 64bit. I ran 3dmark 11, but the score is frustrating. For 1280*720, the score is P730. It is too low right? I searched online, the score should at least above 1000. Am I right? I never use this software before. I know nvidia has optimus, so I made the laptop in high performance state and white-listed the 3dmark program. But there is no help. I am guessing 3dmark is using i7's graphic module. It cannot transform to nvidia. In the running detail of 3dmark, the graphic card cannot be identified(The row remain blank). Can anybody tell me is this the normal case? If not, can I use some other software to test if my nvidia card is working fine? If this nvidia card cannot work, I will return the new laptop asap. Thanks.

    Read the article

  • vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

    - by Graphics Noob
    So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

    Read the article

  • Is there a learnable filter in Thunderbird for non-spam messages (as in Opera Mail)?

    - by Debilski
    One feature I like very much about Opera Mail is that you can have learnable filters for any purpose. So not only can you filter spam messages but also messages that your friends sent you or info mails from web platforms without having to enter each and every mail address you want to filter. It actually works quite satisfying and you can combine it with string filtering, too. It does a few mistakes in the beginning but then improves quickly after you have removed some of the false positives. However, there are a couple of drawbacks with the Opera Mail module. The filters are only ‘virtual’. So, with IMAP there is no easy way of mirroring the filtered structure back on the server and when I’m using webmail I’ll see the whole unfiltered mess in the inbox folder. Opera’s not using the OS X address book — and neither does it use ldap (which is not too important for me at the moment). So, I’m not specifically looking for a Thunderbird solution here, a way to fix things in Opera or Apple Mail should do as well. Or some other E-Mail program I don’t even know about yet. (So, to be clear, I’d like to have: OS X Address Book integration, Learnable filters for any type of filtering, Ability to push filtered folder structure to the IMAP server) But I thought like, if it is possible then most probably there would be an add-on for Thunderbird available. Any ideas?

    Read the article

  • Sound doesn't work anymore after replacing RAM

    - by thejh
    Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

    Read the article

  • RTL8188CE doesn't connect to any wifi access points

    - by Drakmail
    I'm using network manager to connect. Also, tryed iwconfig. Results are same. I even try to connect to open access point — results are same. More information: Drakmail@thinkpad-x220:~$ lspci | grep Network | grep -v Ethernet 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Drakmail@thinkpad-x220:~$ uname -a Linux thinkpad-x220 3.1.0 #1 SMP PREEMPT Wed Oct 26 02:19:49 UTC 2011 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux Drakmail@thinkpad-x220:~$ dmesg | tail -n 10 [ 846.901574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 906.812461] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 966.728810] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1026.639676] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1030.925574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin At this moment I try to connect to open wifi ap: [ 1031.252403] wlan0: direct probe to 00:24:8c:55:fa:ed (try 1/3) [ 1031.451943] wlan0: direct probe to 00:24:8c:55:fa:ed (try 2/3) [ 1031.651658] wlan0: direct probe to 00:24:8c:55:fa:ed (try 3/3) [ 1031.851354] wlan0: direct probe to 00:24:8c:55:fa:ed timed out [ 1086.544960] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin My distribution: Drakmail@thinkpad-x220:~$ cat /etc/*version AgiliaLinux release 8.0.0 (Sammy) (Something between Slackware and Archlinux). Also, I saw that wifi module to often trying to load a firmware file. Any ideas what it would be?

    Read the article

  • Restrict access to one SVN repository (overwrite default)

    - by teel
    I'm trying to set up our SVN server so that by default the group developers will have access to all repositories, but I want to override that setting on some certain repositories where I want to allow access only to single defined users (or separate groups) The current configuration is SVN + WebDAV on Apache2. All my repositories are located at /var/lib/svn/ In dav_svn.authz I currently have [/] @developers = rw @users = r Now I want to add one repository (let's call it secret_repo) that would only allow access to one user who is also a member of the developers group.¨ I tried to do [secret_repo:/] * = secret_user = rw Where secret_user is the user I'd like to give access to the repository, but it doesn't seem to work. Currently the server is using Apache's LDAP module to authenticate users from our active directory domain and I'd like to keep it that way if possible. Also I seem to be able to browse all my repos freely with any web browser, which I'd like to block. Second problem is that I have webSVN on the server, which is using Apache's LDAP authentication. Everyone who is a member of our domain can access it, so I'd like to hide this secret_repo from websvn listing. It's configured not with parentPath("/var/lib/svn");. Do I really need to remove that and add every repository separately, except the ones I want to hide?

    Read the article

  • Mercurial hook fails on Windows

    - by Nick Hodges
    I am trying to use the headcount hook (https://bitbucket.org/dgc/headcount/overview) with my main develop repository. I pulled the code and placed it in C:\Python26\Lib\site-packages. I made the following entries into my hgrc file: [hooks] pretxnchangegroup.headcount = python:headcount.headcount.hook [headcount] push_ok = * commit_ok = * warnmsg = %(headcount)d new heads detected. You may not push new heads to this repository. debug = False All this is as per the install instructions. I then cloned the repository, created a branch, committed a change to that branch, and then issued: hg push -f as a test. However, this fails with: C:\junk\htmlwriter>hg push -f pushing to c:\code\htmlwriter searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files transaction abort! rollback completed abort: pretxnchangegroup.headcount hook is invalid (import of "headcount.headcou nt" failed) I then ran this: C:\Python26>python c:\Python26\Lib\site-packages\headcount\headcount.py Traceback (most recent call last): File "c:\Python26\Lib\site-packages\headcount\headcount.py", line 2, in <modul e> import mercurial.node ImportError: No module named mercurial.node I'm far from a python expert, so can someone help me figure out how to get the headcount hook to run inside my mercurial environment? Details: Windows 7, Mercurial 1.7.2, TortoiseHg 1.1.7

    Read the article

  • RewriteRule causes POST data to get dumped before I can access it

    - by MatthewMcGovern
    I'm currently setting up my own 'webserver' (a Ubuntu Server on some old hardware) so I can have a mess around with PHP and get some experience managing a server. I'm using my own little MVC framework and I've hit a snag... In order for all requests to make it through the dispatcher, I am using: <Directory /var/www/> RewriteEngine On RewriteCond %{REQUEST_URI} !\.(png|jpg|jpeg|bmp|gif|css|js)$ [NC] RewriteRule . HomeProjects/index.php [L] </Directory> Which works great. I read on Stackoverflow to change the [L] to [P] to preserve post data. However, this causes every page to return: Not Found The requested URL <url> was not found on this server. So after some more searching, I found, "Note that you need to enable the proxy module, and the proxy_http_module in the config files for this to work." The problem is, I have no idea how to do this and everything I google has people using examples with virtual hosts and I don't know how to 'translate' that into something useful for my setup. I'm accessing my webserver via my public IP and forwarding traffic on port 80 to the web server (like I'm pretending I have a domain/server). How can I get this enabled/get post data working again? Edit: When I use the following, the server never responds and the page loads indefinately? LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so <Directory /var/www/> RewriteEngine On RewriteCond %{HTTP_REFERER} !^http://(.+\.)?82\.6\.150\.51/ [NC] RewriteRule .*\.(jpe?g|gif|bmp|png|jpg)$ /no-hotlink.png [L] RewriteCond %{REQUEST_URI} !\.(png|jpg|jpeg|bmp|gif|css|js)$ [NC] RewriteRule . HomeProjects/index.php [P] </Directory>

    Read the article

  • Getting PAM/user info into php - something like Net_Finger instead of a db?

    - by digitaltoast
    I've got a very small user group who just need to login, upload, check and then move specific files to a different area when ready. Right now, I use the nginx PAM auth module to log them in against their unix accounts. As their login is their home directory, I've already got the info to send the uploads to the right area - one line of php and no database needed. But I'm maintaining a separate DB just so PHP can welcome them, grab their email and send them an email when processed. Yes, sure I could use nosql or sqlite instead so as to not need a whole mysql install. But it occurred to me that as I've got all these blank user fields for phone numbers I could populate with any data, that I could use something like php's Net_Finger. Which failed for me with: sudo pear install Net_Finger Starting to download Net_Finger-1.0.1.tgz (1,618 bytes) ....done: 1,618 bytes could not extract the package.xml file from "/build/buildd/php5-5.5.9+dfsg/pear-build-download/Net_Finger-1.0.1.tgz" Download of "pear/Net_Finger" succeeded, but it is not a valid package archive Error: cannot download "pear/Net_Finger" At which point I thought I'd stop, and take a ServerFault reality check - is this a really bad/dangerous/stupid idea just to stop me having to maintain details in two places rather than one? It there a better way? Googling shows that it's not an oft-asked thing, so perhaps with good reason?

    Read the article

  • Hard Reset USB in Ubuntu 10.04

    - by Cory
    I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

    Read the article

  • Can't get 1440x900 resolution with GRUB2 although vbeinfo says it's available

    - by TomSW
    I'm trying to use GRUB2 in graphical mode with 1440x900 resolution, but the result is always garbled nonsense: the highest resolution I can get is 1280x800. Word is from googling that long as vbeinfo lists a resolution, GRUB2 can use it. This doesn't seem to be true: vbeinfo says that 1440x900 is available but it doesn't work. Testing it from the GRUB2 command line: set gxfmode=1440x900 terminal_output gfxterm # -> garbled nonsense # back to trusty 640x480 terminal_output console The graphics card is an Intel GM965. Once linux boots the framebuffer switches to 1440x900. Added after epheminent's reply and various experiments vbeinfo lists two sets of modes. The first set runs from 0x160 to 0x16b, with resolutions 768x480, 960x600, 1280x800 and 1440x900 Then - after a bunch of text-only modes - the second set, containing resolutions 1024x768, 800x600, and 640x480 The first set of modes aren't altered by 915resolution. They all work except 1440x900. The resolution of modes in the second set can be altered using the 915resolution module / command available in GRUB2 = 1.99. # in /boot/grub/grub.cfg insmod 915resolution # 30, 32, 34 all work for me: all that varies is which modes are altered 915resolution 30 1440 900 # setting an impossible resolution changes the mode to "text-only" # in my case 1280x1024 is not supported 915resolution 30 1280 1024 Clearly, 1440x900 should just work: adding it with 915resolution is just a workaround.

    Read the article

  • Zero downtime deployment (Tomcat), Nginx or HAProxy, behind hardware LB - how to "starve" old server?

    - by alexeypro
    Currently we have the following setup. Hardware Load Balancer (LB) Box A running Tomcat on 8080 (TA) Box B running Tomcat on 8080 (TB) TA and TB are running behind LB. For now it's pretty complicated and manual job to take Box A or Box B out of LB to do the zero downtime deployment. I am thinking to do something like this: Hardware Load Balancer (LB) Box A running Nginx on 8080 (NA) Box A running Tomcat on 8081 (TA1) Box A running Tomcat on 8082 (TA2) Box B running Nginx on 8080 (NB) Box B running Tomcat on 8081 (TB1) Box B running Tomcat on 8082 (TB2) Basically LB will be directing traffic between NA and NB now. On each of Nginx's we'll have TA1, TA2 and TB1, TB2 configured as upstream servers. Once one of the upstreams's healthcheck page is unresponsive (shutdown) the traffic goes to another one (HttpHealthcheckModule module on Nginx). So the deploy process is simple. Say, TA1 is active with version 0.1 of the app. Healthcheck on TA1 is OK. We start TA2 with Healthcheck on it as ERROR. So Nginx is not talking to it. We deploy app version 0.2 to TA2. Make sure it works. Now, we switch the Healthcheck on TA2 to OK, switch Healthcheck to TA1 to ERROR. Nginx will start serving TA2, and will remove TA1 out of rotation. Done! And now same with the other box. While it sounds all cool and nice, how do we "starve" the Nginx? Say we have pending connections, some users on TA1. If we just turn it off, sessions will break (we have cookie-based sessions). Not good. Any way to starve traffic to one of the upstream servers with Nginx? Thanks!

    Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >