Search Results

Search found 10931 results on 438 pages for 'struts config'.

Page 271/438 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

  • Unity in 12.10 comes up behind other windows

    - by ams
    I've just upgraded from 12.04 to 12.10. For the most part, everything works fine, but I have a few small problems with Unity, or maybe Compiz. When I hit the Super key, or click on the dash launcher, the dash sometimes comes up behind the other windows on the screen. As you can imagine, this makes it somewhat tricky to use. Once it has started coming up behind, no amount of trying again will convince it to come back to the front. Possibly related, the Alt-Tab switcher doesn't show either. It maybe that there isn't one, or maybe that's behind also? Alt-Tab does switch the windows, but there's no visual indicator. When I hit Super-W, the windows do all do the zoom thing, but it's slow and juddery where it used to be smooth in 12.04. I'm using the standard "radeon" driver, same as before, with a triple-head monitor setup (and that works fine). I've not tried the proprietary drivers as I've previously found the multi-monitor support much weaker than the default driver, but maybe that's the way to go now? Video play fine. Even WebGL seems ok. Do other see this problem? Is it a bug? Or have I just got some left-over config from 12.04 in the way?

    Read the article

  • Twinview broken on upgrade to ubuntu 10.10

    - by mapkyca
    I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

    Read the article

  • Deploying my first website!

    - by test
    I have built a data driven website - an asp.net website, using the entity framework. In my solution I have 4 projects - the web application PresentationLayer, and 3 class libraries - Data Layer, Business and Common Layer. In one of these libraries, Common Layer I have my Model (MyModel.edmx). I have always tested my application on Cassini - Asp.Net Development Server. I have never touched IIS in my life. I bought a domain and hosting on go daddy. My logic tells me to grab my four folders (1 for each layer) and simply move them to the root folder. But I know I'm wrong since then the home page would be mywebsite.org/presentationlayer/default.aspx and second of all I start getting a bunch of errors where files do not load or they are not found. I also know that I need to manage the web.config but I don't have any experience where to start. I'm not sure if this is a problem but I also have a web service included in my presentation layer.

    Read the article

  • Login takes very long, annoying repaints once a minute when logged in: How to troubleshoot?

    - by user946850
    I am suffering from a strange problem with my Gnome Shell in Ubuntu 12.10. The login takes very long ( 30 sec), with a blank screen. In Google Chrome and Thunderbird (and perhaps in other applications), the main window freezes and is repainted in periodic intervals of less than one minute. The freeze takes several seconds, and it seems that font and appearance of, e.g., tabs and buttons briefly changes. Attempting to enable the second monitor show an error message related to XRANDR. Everything seems to have started three days ago, after I had to force-shutdown the machine while it was hibernating due to low power. (It was hibernating for quite a while and didn't want to stop.) Silly me. I have tried the following measures, with no avail: Checked all package file md5 hashes using debsums Reinstalled all packages using a variant of dpkg --get-selection \* | xargs apt-get install -reinstall Temporarily moved configuration directories such as .gconf, .config and .gnome2 to another location Created a new user account When I choose "Ubuntu" during login, the problems disappear. I am sort of frustrated that reinstalling all packages didn't fix the issue. How to troubleshoot this Gnome Shell (?) problem, short of reinstalling the system? (Or did anyone see this kind of behavior on their machine?)

    Read the article

  • Randomly Freezes - How Can I Diagnose the Problem?

    - by j0rd4n
    At random times, Ubuntu 10.04 freezes, and I have to do a hard shutdown. It was upgraded from 9.10 which didn't freeze. First, is this is common problem with a quick answer, and if not, what can I do to diagnose it? I've tried checking application/kernel logs, but nothing gives me a clue as to what caused the problem. My guess, is that since the OS froze, no logs could be updated. Ideas? SOLUTION: Solved it. My particular problem was my graphics card (integrated Radeon 9000 series). netconsole revealed I was getting the error: "reserve failed for wait". After trial-and-error, I manually configured my video card and disabled hardware acceleration. Completely fixed the issue. Here is what I did: Manually Created xorg.conf Ubuntu automatically configures xorg.conf and doesn't use a file. To edit this file, you have to tell Ubuntu to explicitly create one and then edit it. Here are the steps: Restart system Hold Shift as GRUB boots Select root terminal in GRUB login menu Execute: X -config xorg.conf.new Copy: cp xorg.conf.new /etc/X11/xorg.conf Disable Hardware Acceleration The following is specific to my Radeon card, but I'm sure other cards have a similar setup. Edit xorg.conf Find "Device" section for graphics card Uncomment "NoAccel" option and set to "True" Save + reboot Hope that helps.

    Read the article

  • Run Grunt task in Visual Studio Release Build with a bat file

    - by Aligned
    Originally posted on: http://geekswithblogs.net/Aligned/archive/2014/08/19/run-grunt-task-in-visual-studio-release-build-with-a.aspx 1. Add a BeforeBuild in your csproj file. Edit the xml with a text editor. <Target Name="BeforeBuild"> <Exec Condition="'$(Configuration)' == 'Release'" Command="script-optimize.bat" /> </Target> 2. Create the script-optimize.batREM "%~dp0" maps to the directory where this file exists cd %~dp0\..\YourProjectFolder call npm uninstall grunt call npm uninstall grunt call npm install --cache-min 604800 -g grunt-cli call npm install --cache-min 604800 grunt typescript requirejs copy less:compile less:mincompileThis grunt command will compile typescript, run the requireJs optimizer, complie and minimize less.3. Make it use the minified code when the Web.config compilation debug is set to false <!-- These CustomCollectFiles actions are used so that the Scripts-Release folder/files are included        when publishing even though they are not project references -->  <Target Name="CustomCollectFiles">    <ItemGroup>      <_CustomFiles Include="Scripts-Release\**\*" />  </ItemGroup>  </Target> That should be all you need to get a Grunt task to minify and combine JS (plus other tasks) in Visual Studio Release build with debug = false. This is a great video of Steve Sanderson talking about SPAs, npm, Knockout, Grunt, Gulp, ect. I highly recommend it.

    Read the article

  • How to reset the language of the package descriptions

    - by xubuntix
    I have had German as my main language about a year ago. Later I changed it to English. Most parts of the system accepted the change. The notable exceptions are the package descriptions, which remain in German for some packages. You can see in the image (apt-cache and software-center), that while some descriptions are in English, some have remained in German. So the question is: how do I reset this? I guess that there is somewhere a description cache that needs to be told that it should update all descriptions? EDIT: As asked: the output of some language related commands: $ cat /etc/default/locale LANG="en_US.UTF-8" $ apt-config dump | grep Lang Acquire::Languages ""; Acquire::Languages:: "de_DE"; Acquire::Languages:: "de"; Acquire::Languages:: "en"; Acquire::Languages:: "none"; $ locale LANG=de_DE.UTF-8 LANGUAGE=en LC_CTYPE="de_DE.UTF-8" LC_NUMERIC="de_DE.UTF-8" LC_TIME="de_DE.UTF-8" LC_COLLATE="de_DE.UTF-8" LC_MONETARY="de_DE.UTF-8" LC_MESSAGES="de_DE.UTF-8" LC_PAPER="de_DE.UTF-8" LC_NAME="de_DE.UTF-8" LC_ADDRESS="de_DE.UTF-8" LC_TELEPHONE="de_DE.UTF-8" LC_MEASUREMENT="de_DE.UTF-8" LC_IDENTIFICATION="de_DE.UTF-8" LC_ALL= As a note: I'm not sure what each entry means, but some of the de_DE.UTF-8 are probably ok, since I do want paper-sizes, monetary, time, etc. in standard German formats.

    Read the article

  • How can I define custom keyboard mappings to resize, move, and manage windows?

    - by fumon
    I just returned to ubuntu (13.04) after a year using OS X exclusively. I love the improvements that have come to ubuntu and unity, and I'm glad to be back. There's just one thing, though... Slate is a simple OS X tool that allows users to quickly create powerful keyboard macros and really take advantage of their screen space. I have to say I was spoiled by it. Even on a tiny laptop, my workflow was never interrupted by changing workspaces or leaving the keyboard to adjust a window, because perfect adjustment was a keystroke or two away. For example: bind h:ctrl;alt;cmd resize -10% +0 # this increases the window's left width by 10% bind h:shift;alt nudge -10% +0 # this moves the window left by 10% You make a big config file, and like vim, tmux, and everything else, it just becomes muscle memory. I can't seem to find a way to achieve anything close to this in linux or ubuntu. I've tried to make do with compiz window settings and the built-in stuff Ubuntu offers, but it's not even in the same realm. Although to be fair, this level of tuning isn't something most people care about. Thanks, guys. :) Any feedback would be appreciated.

    Read the article

  • How can I play 24Bit 96000Hz vinyl rips?

    - by Peter
    I am getting music through the Nvidia HDMI but it is all down-sampled to 44000Hz. I have spent at least 3 hours searching for an answer yesterday. I use Pulse Volume and I even changed the default settings in the Pulse folder to 96000 but it does not work. Though 5.1 sound works perfectly. They all work well in Windows 7, but I prefer to use Ubuntu. All the config files for all the programs are in the etc folder, then look in the pulse folder, and there are 3 three files, 2 of these I changed the permissions and I changed 16 and 44000 to 24 and 96000 as I had read in another forum, but it worked for them and not for me. Though 5.1 works as I have special mp4 file that can check each channel. I did alot of restarts and checking after these changes as nothing had happened, my amp tells me the freq of the signal, which does work which I have tested on Windows 7. I have also gone to systems to download the latest driver for mu Nvidia card. But even if it does not work, I guess I can always play Cd's. But I think my player have become more unstable since I changed the configs, so I may uninstall and install Pulse Volume Control again.

    Read the article

  • Exadata???DiskGroup

    - by Liu Maclean(???)
    Exadata???Asm Diskgroup ???????: 1.??dcli -g /home/oracle/cell_group -l root cellcli -e list griddisk ????active?griddisk [root@dm01db01 ~]# dcli -g /home/oracle/cell_group -l root cellcli -e list griddisk dm01cel01: DATA_DM01_CD_00_dm01cel01 active dm01cel01: DATA_DM01_CD_01_dm01cel01 active dm01cel01: DATA_DM01_CD_02_dm01cel01 active dm01cel01: DATA_DM01_CD_03_dm01cel01 active dm01cel01: DATA_DM01_CD_04_dm01cel01 active dm01cel01: DATA_DM01_CD_05_dm01cel01 active dm01cel01: DATA_DM01_CD_06_dm01cel01 active dm01cel01: DATA_DM01_CD_07_dm01cel01 active dm01cel01: DATA_DM01_CD_08_dm01cel01 active dm01cel01: DATA_DM01_CD_09_dm01cel01 active dm01cel01: DATA_DM01_CD_10_dm01cel01 active dm01cel01: DATA_DM01_CD_11_dm01cel01 active dm01cel01: DBFS_DG_CD_02_dm01cel01 active dm01cel01: DBFS_DG_CD_03_dm01cel01 active dm01cel01: DBFS_DG_CD_04_dm01cel01 active dm01cel01: DBFS_DG_CD_05_dm01cel01 active dm01cel01: DBFS_DG_CD_06_dm01cel01 active dm01cel01: DBFS_DG_CD_07_dm01cel01 active dm01cel01: DBFS_DG_CD_08_dm01cel01 active dm01cel01: DBFS_DG_CD_09_dm01cel01 active dm01cel01: DBFS_DG_CD_10_dm01cel01 active dm01cel01: DBFS_DG_CD_11_dm01cel01 active dm01cel01: RECO_DM01_CD_00_dm01cel01 active dm01cel01: RECO_DM01_CD_01_dm01cel01 active dm01cel01: RECO_DM01_CD_02_dm01cel01 active dm01cel01: RECO_DM01_CD_03_dm01cel01 active dm01cel01: RECO_DM01_CD_04_dm01cel01 active dm01cel01: RECO_DM01_CD_05_dm01cel01 active dm01cel01: RECO_DM01_CD_06_dm01cel01 active dm01cel01: RECO_DM01_CD_07_dm01cel01 active dm01cel01: RECO_DM01_CD_08_dm01cel01 active dm01cel01: RECO_DM01_CD_09_dm01cel01 active dm01cel01: RECO_DM01_CD_10_dm01cel01 active dm01cel01: RECO_DM01_CD_11_dm01cel01 active dm01cel02: DATA_DM01_CD_00_dm01cel02 active dm01cel02: DATA_DM01_CD_01_dm01cel02 active dm01cel02: DATA_DM01_CD_02_dm01cel02 active dm01cel02: DATA_DM01_CD_03_dm01cel02 active dm01cel02: DATA_DM01_CD_04_dm01cel02 active dm01cel02: DATA_DM01_CD_05_dm01cel02 active dm01cel02: DATA_DM01_CD_06_dm01cel02 active dm01cel02: DATA_DM01_CD_07_dm01cel02 active dm01cel02: DATA_DM01_CD_08_dm01cel02 active dm01cel02: DATA_DM01_CD_09_dm01cel02 active dm01cel02: DATA_DM01_CD_10_dm01cel02 active dm01cel02: DATA_DM01_CD_11_dm01cel02 active dm01cel02: DBFS_DG_CD_02_dm01cel02 active dm01cel02: DBFS_DG_CD_03_dm01cel02 active dm01cel02: DBFS_DG_CD_04_dm01cel02 active dm01cel02: DBFS_DG_CD_05_dm01cel02 active dm01cel02: DBFS_DG_CD_06_dm01cel02 active dm01cel02: DBFS_DG_CD_07_dm01cel02 active dm01cel02: DBFS_DG_CD_08_dm01cel02 active dm01cel02: DBFS_DG_CD_09_dm01cel02 active dm01cel02: DBFS_DG_CD_10_dm01cel02 active dm01cel02: DBFS_DG_CD_11_dm01cel02 active dm01cel02: RECO_DM01_CD_00_dm01cel02 active dm01cel02: RECO_DM01_CD_01_dm01cel02 active dm01cel02: RECO_DM01_CD_02_dm01cel02 active dm01cel02: RECO_DM01_CD_03_dm01cel02 active dm01cel02: RECO_DM01_CD_04_dm01cel02 active dm01cel02: RECO_DM01_CD_05_dm01cel02 active dm01cel02: RECO_DM01_CD_06_dm01cel02 active dm01cel02: RECO_DM01_CD_07_dm01cel02 active dm01cel02: RECO_DM01_CD_08_dm01cel02 active dm01cel02: RECO_DM01_CD_09_dm01cel02 active dm01cel02: RECO_DM01_CD_10_dm01cel02 active dm01cel02: RECO_DM01_CD_11_dm01cel02 active dm01cel03: DATA_DM01_CD_00_dm01cel03 active dm01cel03: DATA_DM01_CD_01_dm01cel03 active dm01cel03: DATA_DM01_CD_02_dm01cel03 active dm01cel03: DATA_DM01_CD_03_dm01cel03 active dm01cel03: DATA_DM01_CD_04_dm01cel03 active dm01cel03: DATA_DM01_CD_05_dm01cel03 active dm01cel03: DATA_DM01_CD_06_dm01cel03 active dm01cel03: DATA_DM01_CD_07_dm01cel03 active dm01cel03: DATA_DM01_CD_08_dm01cel03 active dm01cel03: DATA_DM01_CD_09_dm01cel03 active dm01cel03: DATA_DM01_CD_10_dm01cel03 active dm01cel03: DATA_DM01_CD_11_dm01cel03 active dm01cel03: DBFS_DG_CD_02_dm01cel03 active dm01cel03: DBFS_DG_CD_03_dm01cel03 active dm01cel03: DBFS_DG_CD_04_dm01cel03 active dm01cel03: DBFS_DG_CD_05_dm01cel03 active dm01cel03: DBFS_DG_CD_06_dm01cel03 active dm01cel03: DBFS_DG_CD_07_dm01cel03 active dm01cel03: DBFS_DG_CD_08_dm01cel03 active dm01cel03: DBFS_DG_CD_09_dm01cel03 active dm01cel03: DBFS_DG_CD_10_dm01cel03 active dm01cel03: DBFS_DG_CD_11_dm01cel03 active dm01cel03: RECO_DM01_CD_00_dm01cel03 active dm01cel03: RECO_DM01_CD_01_dm01cel03 active dm01cel03: RECO_DM01_CD_02_dm01cel03 active dm01cel03: RECO_DM01_CD_03_dm01cel03 active dm01cel03: RECO_DM01_CD_04_dm01cel03 active dm01cel03: RECO_DM01_CD_05_dm01cel03 active dm01cel03: RECO_DM01_CD_06_dm01cel03 active dm01cel03: RECO_DM01_CD_07_dm01cel03 active dm01cel03: RECO_DM01_CD_08_dm01cel03 active dm01cel03: RECO_DM01_CD_09_dm01cel03 active dm01cel03: RECO_DM01_CD_10_dm01cel03 active dm01cel03: RECO_DM01_CD_11_dm01cel03 active ??????????griddisk, ?????’cellcli -e drop griddisk’ ?’cellcli -e create griddisk’????griddisk ,??????drop DBFS_DG???griddisk 2.??ASM???create disk group ?????CELL?IP,????????????? [root@dm01db02 ~]# cat /etc/oracle/cell/network-config/cellip.ora cell="192.168.64.131" cell="192.168.64.132" cell="192.168.64.133" SQL> create diskgroup DATA_MAC normal redundancy 2 DISK 3 'o/192.168.64.131/RECO_DM01_CD_*_dm01cel01' 4 ,'o/192.168.64.132/RECO_DM01_CD_*_dm01cel02' 5 ,'o/192.168.64.133/RECO_DM01_CD_*_dm01cel03' 6 attribute 7 'AU_SIZE'='4M', 8 'CELL.SMART_SCAN_CAPABLE'='TRUE', 9 'compatible.rdbms'='11.2.0.2', 10 'compatible.asm'='11.2.0.2' 11 / 3. MOUNT ???DISKGROUP ALTER DISKGROUP DATA_MAC mount ; 4.???crsctl start/stop resource ora.DATA_MAC.dg ?????

    Read the article

  • Laptop power button not working

    - by DyP
    I have a (seemingly rather exotic) Dell Latitude XT2 notebook running Lubuntu 12.04, fresh install. Tried to get the power button to work as expected (opening lubuntu-logout, just as I think it was meant to be out-of-the box), but no success: power button does nothing but forced power-off on long press. Here some more information, please ask if something more could help: Power button is recognized as a device: xinput lists Power Button as a slave keyboard at /dev/input/event1, and I can run a tool to listen to that device and invoke some action (successfully). But using .config/openbox/lubuntu-rc.xml to assign some action to XF86ShutDown or XF86PowerOff does nothing. Works well for any key of the keyboard. xinput --test reports a keycode (key press, key release) of 124 when pressing & releasing the power button. xmodmap -pk lists 124 mapped to XF86PowerOff which seems correct to me (btw: is this the same as XF86ShutDown?) When assigning another keysymname to the 124 keycode, e.g. 'w', still nothing happens when pressing the power button (no window seems to receive a 'w'). Works well for any key on the keyboard. The outputs of xev for a press/release of the power button irritate me: MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 41, synthetic NO, window 0x2a00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 41, synthetic NO, window 0x2a00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 41, synthetic NO, window 0x0, keys: 93 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (instead of 93, I also get different values) I might have missed something very basic since I'm not very familiar with both openbox/lubuntu and the X input system. Btw.: same goes for three other special buttons on my laptop..

    Read the article

  • Fail to boot after installation onto ASUS PC 1015PX

    - by strugglingbadly
    My new ASUS 1015PX has the usual Windows on the SDA1 partition - 100Gb, followed by SDA2 - 15Gb - as the recovery partition for Windows, and SDA3 with 183Gb for drive D:\ for windows. ASUS uses SDA4 - 19Mb for it's own use. 11.10 on an USB will load Ubuntu on a try basis and it seems OK, but every time I attempt an install, Ubuntu quickly shuts down and the restart process begins. This repeats endlessly. I've tried 10.04 Netbook Remix but that will not boot at all with the machine reporting - unknown keyword in config file gfxboot vesamenu.c32: not a COM32R image. I've gone through the above about 6 times each with the same results. I have also tried the above with the partitioning unchanged, and using gparted, with SDA3 formatted to ext4, windows D:\ reduced to 8Gb providing a 175Gb unallocated space - all to no avail. Further information: During my attempt to load 11.10, I notice that on the page which offers 3 options of loading, the first in the list includes the statement 'install INSIDE windows...' whereas the on line help shows 'install ALONGSIDE windows...'. (my caps for emphasis) I have double checked that I am using the correct download - not the install within windows option.

    Read the article

  • ubuntu 11.10 can't find wireless after waking from sleep

    - by Colleen
    I've tried a lot of proposed solutions, most of them adding files to /etc/pm/config.d, as well as WiFi stops working after waking from suspend and nothing has worked. hardware info: [colleen@colleen-HP ~]$ sudo lshw -C network [sudo] password for colleen: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:b1:ea:67 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:4000(size=256) memory:c1404000-c1404fff memory:c1400000-c1403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 8c:a9:82:99:48:8c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-21-generic-pae firmware=39.31.5.1 build 35138 ip=192.168.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:c5500000-c5501fff Is anyone else still having this problem? The two solutions I haven't tried are installing wicd and upgrading because I've heard both are kind of unstable/buggy and wicd frankly scares me.

    Read the article

  • HP dv7 Beats Audio Subwoofer on while headphones plugged in

    - by msilis
    I have looked for answers to this but have not found anything. People have similar problems but mostly with getting the subwoofer to work at all. I got the subwoofer to work by editing the /etc/modprobe.d/alsa-base.conf file and adding options snd-hda-intel model=ref. When I plug in my headphones, the main speakers turn off but the subwoofer still has sound coming through it. The output is selected automatically in sound preferences and is set to headphones when they are plugged in. I also have tried muting the main speakers, which in turn mutes the subwoofer, before plugging in the headphones as they seem to have two different volume controls, but as soon as the headphones are plugged in, the subwoofer has sound coming out of it. I am running Ubuntu 11.10 64 bit on HP dv7- 4285dx. I am able to just not have the subwoofer on but since I have gotten it to work I would like to keep it around and not have to change a config file every time I want to plug in my headphones. Any ideas or suggestions would be greatly appreciated. Thanks

    Read the article

  • Change the Log Level of Node Manager.

    - by adejuanc
    This is useful to troubleshoot issues related to Node Manager, such as problems starting a Managed Server or reasons a server could be (re)started. To change the Log Level of Node Manager, you need to edit the nodemanager.properties file. This is usually located at: <MIDDLEWARE_HOME>/wlserver_10.3/common/nodemanager What you need to modify is property: ...LogLevel=INFO... Information about the appropriate values for this property is available in the Node Manager Documentation at 10.3 WebLogic Documentation (and in further releases) which states: LogLevel: Severity level of logging used for the Node Manager log. Node Manager uses the same logging levels as WebLogic Server. Default value: INFO However, this is incorrect. WLS has its own implementation of LogLevel, but Node Manager uses the standard Log Level from the java.util.logging.Level class. Therefore, the possible values for Node Manager LogLevel, in descending order are: SEVERE (highest value) WARNING INFO CONFIG FINE FINER FINEST (lowest value) The highest value provides only messages at the severe level. The warning level provides warning messages and severe messages, and so on. Besides those levels, ALL and OFF are also accepted. For example, if you only want Severe messages to be logged, select SEVERE. If you need the most detailed tracing available, select FINEST. For more information on what it will log at each level, please read the Java SE API for LoggingLevel.

    Read the article

  • Keyboard not working 100% after Ubuntu 13.10 upgrade

    - by Marky
    If this has already been asked, my apologies, I did not find it before writing this. So please do point me to the correct page. Anyway, I have this weird issue on my laptop right now. The keyboard is not functioning 100%. This means, I can type my login details to get into Ubuntu. I can type something on Dash. But other than this (on the desktop), no output from the keyboard when using all the other apps - as in I start to type and nothing comes out. The surprising thing is that when I shift to Guest session, the keyboard functions normally. When I shift to another TTY, like Alt+F5, keyboard works normally. This is the first time I've encountered this so far in my use of Linux. Keyboards normally never fail on any of the desktop environments I've used over the years. Any ideas what's happening? Could be the config files on my home is too messy already. I've upgraded this from 11.10 to 13.04, then now 13.10 without a re-install. Works fine so far, until now that I can't do much without a keyboard. Thanks in advance! P.S. Mouse and touchpad works fine.

    Read the article

  • Single CAS web application in a cluster

    - by Dolf Dijkstra
    Recently a customer wanted to set up a cluster of CAS nodes to be used together with WebCenter Sites. In the process of setting this up they realized that they needed to create a web application per managed server. They did not want to have this management burden but would like to have one web application deployed to multiple nodes. The reason that there is a need for a unique application per node is that the web-application contains information that needs to be unique per node, the postfix for the ticket id.  My customer would like to externalize the node specific configuration to either a specific classpath per managed server or to system properties set at startup.It turns out that the postfix for ticket ids is managed through a property host.name and that this property can be externalized.The host.name property is used in: /webapps/cas/WEB-INF/spring-configuration/uniqueIdGenerators.xmlIt is set in /webapps/cas/WEB-INF/spring-configuration/propertyFileConfigurer.xmlin a PropertyPlaceholderConfigurer.The documentation for PropertyPlaceholderConfigurer:http://static.springsource.org/spring/docs/2.0.x/api/org/springframework/beans/factory/config/PropertyPlaceholderConfigurer.htmlThis indicates that the properties defined through the PropertyPlaceHolderConfigurer can be externalized.To enable this externalization you would need to change host.properties so it is generic for all the managed servers and thus can be reused for all the managed servers: host.name=${cluster.node.id}Next step is to change the startup scripts for the managed servers and add a system property for -Dcluster.node.id=<something unique and stable>.Viola, the postfix is externalized and the web application can be shared amongst the cluster nodes.

    Read the article

  • 5 year old ubuntu system, always dist-upgraded => ok. however some tasks remain

    - by knb
    I have a PC with a current ubuntu distribution installed. I've upgraded many times since 5.10. It always went well, however some tools or features were kindof left behind in a unsatisfactory state: grub to grub2 - is it an really necessary to switch the boot loader some time to grub2. Upgrading this scares me abit. I still have ext3 devices - is it worth upgrading to ext4? should I wait for btrfs? hibernation and suspend- it only worked in 5.10, since 6.04 it was messed up. Should I really care? Any chance to repair this myself? Simply by cleanup or hacking config files. It is a desktop PC after all. So energy saving functionality is not really needed. I am using vmware workstation 6.5 and the latest kernel that supports it is 2.6.32. This is my default kernel now, ignoring 2.6.35. Am I missing anything important in the new kernel now?

    Read the article

  • xubutnu Nvidia Settings not remembered

    - by hozza
    I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Dynamic Monitoring Service (DMS) Configuration Dumping and CPU Utilization

    - by ShawnBailey
    There was recently a report of CPU spikes on a system that were occuring at precise 3 hour intervals. Research revealed that the spikes were the result of the Dynamic Monitoring Service generating a metrics dump and writing it under the server 'logs' folder for every WLS server in the domain. This blog provides some information on what this is for and how to control it. The Dynamic Monitoring Service is a facility in FMw (JRF to be more precise) that collects runtime data on the components deployed to WebLogic. Each component is responsible for how much or how little they use the service and SOA collects a fair amount of information. To view what is collected on any running server you can use the following URL, http://host:port/dms/Spy and login with admin credentials. DMS is essentially always running and collecting this information in the runtime and to protect against loss of this data it also runs automatic backups, by default at the 3 hour interval mentioned above. Most of the management options for DMS are exposed through WLST but these settings are not so we must open the dms_config.xml file which can be found in DOMAIN_HOME/config/fmwconfig/servers/<server_name>/dms_config.xml. The contents are fairly short and at the bottom you will find the following entry: <dumpConfiguration>     <dump intervalSeconds="10800" maxSizeMBytes="75" enabled="true"/> </dumpConfiguration> The interval of 10800 seconds corresponds to the 3 hours and the maximum size is 75MB. The file is written as an archive to DOMAIN_HOME/servers/<server_name>/logs/metrics. This archive contains the dump in XML format. You can disable the dumps all together by simply setting the 'enabled' value to 'false' or of course you could modify the other parameters to suit your needs. Disabling the dumps will NOT impact DMS collections or display at runtime. It will only eliminate these periodic backups.

    Read the article

  • &quot;The protocol 'net.msmq' is not supported.&quot;

    - by John Breakwell
    The “Lessons Learned” blog has an update covering the error message "The protocol 'net.msmq' is not supported." "The protocol 'net.msmq' is not supported." OMG, a new lesson! Will wonders never cease? So I ran into an interesting issue setting up a WCF service to consume an MSMQ queue. I won't bother you with the details of how to actually build a WCF/MSMQ service; there are plenty of tutorials on the subject. I want to share with you an interesting error that I ran into and the surprisingly simple fix. The error occurs when attempting to generate a Service Reference or even simply browsing to the WSDL of your WCF/MSMQ service in the form of a YSOD with the following error: "The protocol 'net.msmq' is not supported." After a lot of Googling on the subject turning up plenty of questions with the same error but no answers. So I went digging into some application level config files on a server that already had a WCF/MSMQ service successfully set up by the network admin, and the answer was amazingly simple: If you are hosting an MSMQ/WCF service in IIS, you have to tell IIS to allow net.msmq protocol. It's in the advanced settings for the application or site in which you are hosting the service. .... aaaand, that's it.

    Read the article

  • How to set individual NTFS partitions permissions behaviour for each user account?

    - by ryniek
    I have two NTFS partitions (DOWNLOADS for downloaded files and VM for my VirtualBox .vdi file) for which i must have full permissions for my allday use account. They should be also automounting when i login to this account. But i've also set Guest account for guests. For Guest account, i want make VM partition fully disabled and invisible (and thus it mustn't automount) but DOWNLOADS partition should be shared with limited privileges with Guest account. Editing fstab i'm able to share DOWNLOADS partition with Guest on limited privileges but VM can be only set to limited and have disabled automounting - so guest can't mount it but it still can be seen in Nautilus, plus I must always mount it manually when i login to allday account. Is there some trick to make what i want? Here's my fstab config: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda1 : UUID=35e66658-5ee9-40cf-bf56-8204959e3df0 / xfs defaults 01 #Entry for /dev/sda2 : UUID=26c714cf-4236-45e7-9c46-cfcf91a215ae /home xfs defaults 02 #Entry for /dev/sda5 : UUID=1315BCB027C44639 /media/DOWNLOADS ntfs-3g auto,uid=1000,gid=1000,umask=0022,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda6 : UUID=60FF39EB72B72264 /media/VM ntfs noauto,uid=1000,gid=1000,umask=0077,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda7 : UUID=c52411f5-105c-45d1-971f-412f962c350e none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks

    Read the article

  • Display glitches running ATI propietary driver under Ubuntu 12.10

    - by crystallero
    I have a lot of problems with the Ati propietary driver (fglrx). I have an iMac (mid 2011) with a Radeon HD 6900M [1002:6720]. I did not have any problem under Ubuntu 12.04, but since I updated to 12.10, I get some annoying graphic corruption. The worst one is that sometimes the screen does not update with the new information. It happens a lot when I change between tabs in Chrome or Sublime Text. It usually gets updated when I scroll the page. Sometimes, when I type, I have to wait a little bit to view the new characters. And I get trails when I move windows too (like a part of the window). After a while, the trail disappears. I tried to install fglrx, fglrx-updates and the new beta driver downloaded from Ati (12.11 Beta 11/16/2012), with no luck. It happens the same with all of them. I tried to mess with Compiz config, but it didn't fix anything. The open source driver does not suffer this problem, but I need the performance of the propietary driver . Do you have any clue? Thanks.

    Read the article

  • Sound not working with Ubuntu 12.10 clean install

    - by ZooRocket
    Did a clean install of Ubuntu 12.10 from 12.04 and the sound is not working now. In 12.04 it worked out of the box. I ran hwinfo --sound > hal.1: read hal dataprocess 4222: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 10: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb.ekgK5auW5RA SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01de Revision: 0x01 Memory Range: 0xfdffc000-0xfdffffff (rw,non-prefetchable) IRQ: 11 (no events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001DEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Not sure how to proceed to fix this. Has also worked prior to this version.

    Read the article

  • How to Downgrade Razor 3 and fix the issue that CSHTML not work in VS10,12 ?

    - by Anirudha
    Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/11/04/how-to-downgrade-razor-3-and-fix-the-issue-that.aspxFew days ago I migrate a project to MVC 4 and suddenly I have seen that MVC project’s cshtml file is no longer working. The problem happen because my project is now based on Razor 3 RC and VS12 doesn’t even have support it. (Remember that VS team will ship support in VS update 4). My migration update it to Razor 3 (which is not related to MVC 4, MVC 4 used old version of Razor 2).   So how to fix the problem. Since VS update 4 in development and MVC 3 support exist in both old Version of VS (10,12) then better to migrate back our Razor to old version so we can use our project in VS 10 or 12. If your project have Razor 3 and it seem that Syntax highlighting doesn’t work for you then I suggest you to try this Nuget package https://www.nuget.org/packages/UpgradeMvc3ToMvc4 Remember that this will not be succeed. What you need to do is delete package folder in your project and now open the packages.config remove all entry of package now.   Now Run this command PM> Install-Package UpgradeMvc3ToMvc4 If this is failed then see what thing make error in console. simply remove the reference and try again. Now run it and see this will work.   After run this you will see that WebGrease Dll have a version number issue. Simply update it to version 1.5.2 and now you have ready your project to run it in .net 4. If you do bin deployment then you don’t need to have installed MVC 4 on server either. Remember that MVC 5 is based on .net 4.5 which simply means you can’t run it in VS10. until VS12 update 4 MVC 5 cshtml page will be work as simple html pages (syntax highlighting and intellisense). Thanks for read my post

    Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >