Search Results

Search found 27979 results on 1120 pages for 'network drive'.

Page 272/1120 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Mount a network drive when windows starts up without being logged in.

  - by GLB03

  Current Scenario: I have a NAS Box, and a Windows 2003 Server that our recording software is on (Security Cameras). The software stores the data on the NAS box. Currently someone has to be logged in with valid credentials in order to keep the drive mounted (e.g. domain admin). I know you can mount the drive with a batch file, but this stores credentials in clear text and is not a good solution. I am looking for another way to get the drive to mount on startup without someone having to be logged in. I do have a generic account setup that has access to read/write to the drive but can't log-in interactively, this is the account I would like to use to mount it if any. Any suggestions?

  Read the article

• Finding Network Status of specific process name

  - by Moev4

  I am looking for the cleanest way on linux to find the port status for a port being used by a specified program name via the command line. I have seen that netstat -p lists all pids but haven't seen anything corresponding to specific process names. Any help would be appreciated.

  Read the article

• How to route broadcast packets from machine with two network interfaces on same subnet

  - by Syam

  I run RHEL 5 and have two NICs on one machine connected to the same subnet: eth0 192.168.100.10 eth1 192.168.100.11 My application needs to receive and transmit UDP packets (both unicast & broadcast) via these interfaces. I've found the way to handle the ARP problem and I've added routes to handle the routing problem: ip rule add from 192.168.100.10 lookup 10 ip route add table 10 default src 192.168.100.10 dev eth0 (and similarly, table 11 for eth1) The problem is that only unicast packets gets routed properly. Broadcast packets always go out through eth0. I tried removing the rule for 192.168.100.0 & 192.168.100.255 from table 255 and adding them to my tables. But then I see ARP requests being given out for packets to 192.168.100.255 (obviously, no nodes respond and nobody gets any data). Due to several techno-political issues, I'm stuck with this configuration and can't change subnets or try something different. I've tried SO_BINDTODEVICE and it works, but I'd prefer a solution that doesn't need my application to run as root. Is there a way to get this working? Any help is highly appreciated.

  Read the article

• Run WMIC command across network

  - by C-dizzle

  Instead of typing this in a command prompt one at a time: wmic /node:ipaddress /user:administrator /password:mypassword bios get serialnumber How can I run that against one entire subnet and output to a text document? Since I do this every couple months to verify our inventory of computers, I would assume there would be a much of easier way I could put this in a batch script instead of doing it manually.

  Read the article

• ubuntu to ubuntu backup in internal network

  - by amirash

  hey, i got my development "home" server witch is ubuntu 10, i brought today a computer in order to make a backup to this computer (the development server does also to him self backups every day but im paranoaid so i want to have two backups just in case on diffrent computers) what is the best way to backup the system core of the development server (like norton ghost) & do a full & incrmnt backup of him to the new computer that ive brought? rsync? rdiff? scp? clonezilla?

  Read the article

• Dual SMTP Server issue with Unicast Network Load Balancing

  - by Igor K

  Using two servers with NLB, each box contains IIS and a mail server. Server1 is the primary Server2 runs the backup mail server The problem is the web app sends email to ourselves. When mail is sent from Server2 (via its own SMTP server) to ourselves, it tries to contact Server1, as its the mail server IP. But under Unicast mode of NLB, it cant reach the host via the public dedicated IP address. How can we get round this?

  Read the article

• How can I use a keyfile on a removable USB drive for my encrypted root in Debian?

  - by naivem

  Recently set up root encryption with a couple of LVM volumes inside one LUKS volume, and I am just a little confused as to how I would go about getting it to automatically unlock using a keyfile stored on a USB flash drive, I presume I would have to put the drive in the fstab inside my initramfs (if there is one), and add a hook for USB device support. But I digress, essentially, I want to know what I have to do to enable my LUKS volume (containing all of my partitions sans /boot) to unlock using a keyfile stored on a USB flash drive, rather than a manually entered passphrase.

  Read the article

• hyper-v cluster behavior when losing network connectivity

  - by ChristopheD

  Setup: (rather new) Hyper-V R2 cluster with 2 nodes (in failover configuration). Fysical host OS: Windows Server 2008. About eight VM's (mixed: Windows Server 2008 and Linux) Yesterday we had a power outage of about 15 minutes. Our blades are on UPS so the fysical host machines (Windows Server 2008) never went down. Our main switches are not on UPS (yet) and we saw the behaviour similar to the following (as distilled from the event logs). The nodes in the cluster lost means of communication (because the external switches went down). The cluster wants to bring down one (the first) of the nodes (to start failover?). The previous step impacts clustered storage where the virtual machine VHD's are located. All VM's got brutally terminated and were found in a failed state in the failover manager in the host OS'es. The Linux VM's were kernel panicking and looked like they had their disk ripped out. This whole setup is rather new to us, so we are still learning about this. The question: We are putting switches on UPS soon but were wondering if the above is expected behavior (seems rather fragile) or if there are obvious improvements configuration-wise to handle such scenario's ? I can upload an evtx file concerning what exactly was going on in case that's necessary.

  Read the article

• Why doesn't Ghost 2003 offer to fill the destination drive?

  - by Neil

  Because it is dangerously low on disk space, I want to upgrade an SBS 2003 server by replacing its existing 72GB drive with a 364GB drive. When I tried to use Norton Ghost 2003 to clone the disk it didn't suggest that I use the entire new drive. I'm worried that I caused the process to fail by overriding its decision - although the cloned drive boots in Safe Mode, if I try booting it normally then none of the SQL Express instances start and something causes the server to reboot before even the Ctrl+Alt+Del screen appears. Does Ghost 2003 know something that I don't? Or should I be using some other software?

  Read the article

• Is it possible to copy recordings off of a DVR box hard drive?

  - by bdr9

  My cable TV company gives me a Cisco Explorer 8640HDC DVR box that can record shows from TV. I know that it contains a hard drive to save the shows on. What format and file system are used to store the videos on the hard drive? I have looked at the documentation for this DVR box and there is no technical information about the manner in which recordings are stored. Is it possible to connect the hard drive to a computer and extract the recordings from it?

  Read the article

• Enter network credentials as part of batch script

  - by Michael

  WinXP: I have several system services that are needed to run some machinery in my lab. The machine these services are running uses a lab login that has administrator rights. Our IS department, unfortunately, has it set up where at some point during the night the login "loses" the privilege level to start/stop these services. The account stays logged in, but the software controlling my hardware becomes unresponsive. In order to get things back up and running, I have to stop the system services and restart them. Because of the security settings, however, I have to re-enter the user password to start the service (even though the user was never logged out). That, I get the "This service cannot be started due to a logon failure" and I have to enter the password. What would be ideal is to have a batch script run before anyone gets into work that stops all of the necessary services, enters the user credentials when prompted, and then restarts them so that everything is ready for first shift to run. I assumed that using the Task Scheduler in Windows would work as it allows you to run batch files with a user's name and password, but this didn't seem to do the trick. With this setup I would arrive to find that all the services are stopped but not started again. (Presumably because the authentication failed.) The batch file is about as simple as it gets, all I have is: net stop "Service1" net stop "Serivce2" etc., then restart in reverse order based on dependency: net start "Service2" net start "Serivce1" What would it take to accomplish what I'm trying to do and restart the services?

  Read the article

• Slow and unresponssive network

  - by Jason94

  Ive have the Nokia N900 mobile phone (running Maemo linux), and my device is really slow while using the wifi and trying to get stuff online (checking mail, loading pages). The webbrowsers itself (MicroB, Firefox, Opera) starts fast. Yesterday ive tried to set the dns to googles but that did not solve the case. Is there, and how do i check/verify my connection to the internet if im connected to my home wifi in linux? (tools, other then ping :D)

  Read the article

• Can't ping static IP from internal network, only from outside

  - by Mike

  I'm running ubuntu and I have apache running, however, I can't ping internally to my static IP nor browse http://207.40.XXX.XX the web server using my static IP. I can only ping/browse localhost, 127.0.0.1, and 192.168.0.120 OR 207.40.XXX.XX only from the outside world. # cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 my-server.myhost.com my-server # hostname my-server # netstat -tapn tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:29754 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN Any ideas why this is not working?

  Read the article

• How two use 2 subnets on one network

  - by BGuy2010

  I have some servers at a colocation. They've given us an IP range,subnet,and gateway. Now we have run out of IP's and they've given us a new range of IP's but with a different subnet and gateway. We have a Juniper NetScreen firewall and a load balancer, and I am not sure how to proceed in order to be able to use these new IPS that are on a different subnet. Do I need to setup a new VLAN? on our firewall? I tried adding one of the new IP's on one of our servers, with the new subnet and gateway. I could ping the alternate gateway, but could not ping the assigned IP from outside or from inside.

  Read the article

• How do I route traffic to website using a spcified network connection on Windows 7

  - by rwetzeler

  I want to route all traffic to a website over my wireless connection while the rest of the traffic using my lan. What I tried was first finding out the IP address of the website I want to go to. For example, lets say pandora.com. I found it resolves to 208.85.40.20. I have entered that entry into my hosts file. I then added that route using route add 208.85.40.20 mask 255.255.255.255 WirelessIP. It doesn't seem to work however. Instead of using the IP address, is there a way that I can just say.. this URL to route over that connection? Does anyone know of a program that I can install that will do this.. possibly some sort of proxy or a software load balancer that can do this?

  Read the article

• What router settings to use for wireless home network

  - by Question Overflow

  While looking at the setting of my wireless router, I am bewildered by the array of options available. Despite searching on Wikipedia to try to understand the various acronyms, I am still clueless to decide what is the best setting to use although the default works fine. Rather than calling the internet service provider (ISP) to ask them the correct settings, I hope to learn more about the differences between some of the options listed below, so that I would be able to make a more informed decision from now onwards: PPPoE vs PPPoA LLC vs VC-Mux Bridge vs Routed In addition, I would also like to know the significance of the following MTU VPI VCI And whether or when I should manually specify DNS?

  Read the article

• Processing files from a Content Distribution Network problem

  - by Derek

  From what I understand that CDNs are meant to physically cache your static files in multiple regions closer to your users. However, I've noticed a few websites that when a page is requested from their server, they grab the asset files from their cdn, process them (compress, minify, etc.) cache the results on their server and then send them to the user requesting the page. This doesn't make too much sense to me. Wouldn't processing the files on your server eliminate the gains from using a cdn? Is this a normal way of doing things, or am I not understanding the whole asset management concept?

  Read the article

• Same network same switch but computers can't talk "ping"to eachother [closed]

  - by Sue

  Possible Duplicate: How does IPv4 Subnetting Work? Each computer(all 2 of them) can ping the router but can't ping each-other and firewall is off. Same default gateway, IP address very similar (just two number away at end) but the subnet mask is different between these two computers. One ends in 192 the other 224. There is a switch between them that then connects to the router. Why can't the computers ping each-other?

  Read the article

• OpenVPN bridge network from routed clients

  - by gphilip

  I have the following setup: subnet 1 - 10.0.1.0/24 with a machine used as NAT and also running an OpenVPN client subnet 2 - 192.168.1/24 with an OpenVPN server (the server in subnet 1 connect here) subnet 3 - 10.0.2.0/24 that uses the NAT machine (subnet 1) to access the internet, so all non-local traffic is routed there to the eth0 interface The OpenVPN client creates the tun0 interface and appropriate routing so that I can access machines from 192.168.1/24 [root@ip-10-0-1-208 ~]# telnet 192.168.1.186 8081 Trying 192.168.1.186... Connected to 192.168.1.186. Escape character is '^]'. [root@ip-10-0-1-208 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.1.1 0.0.0.0 UG 0 0 0 eth0 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.1 10.8.0.5 255.255.255.255 UGH 0 0 0 tun0 10.8.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 169.254.169.254 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 192.168.0.0 10.8.0.5 255.255.0.0 UG 0 0 0 tun0 However, when I try the same from subnet 3, it can't reach that machine. [root@ip-10-0-2-61 ~]# telnet 192.168.1.186 8081 Trying 192.168.1.186... I suspect that it's because subnet 3 is routed to eth0 on the NAT machine in subnet 1 and it cannot jump to tun0. What's the easiest way to resolve it? I don't want to use iptables. I can't change the routing from machines in subnet 1 because it's done in AWS and so it works only with specific interfaces. Also, the NAT machine gets its IP with DHCP and so bridging is a bit complicated. IP forwarding is set on the NAT machine [root@ip-10-0-1-208 ~]# cat /proc/sys/net/ipv4/ip_forward 1 Thank you!

  Read the article

• How to elegantly selectively exclude FreeBSD network traffic from OpenVPN interface by port

  - by Polygonica

  inexperienced sysadmin here. I'm planning on running a net daemon inside a FreeBSD jail through OpenVPN, but want to be able to SSH directly into the jail and use the daemon's web interface daemon without going through the VPN. As I understand it, an OpenVPN tunnel is normally set up as a default virtual internet interface, and so incoming traffic will go out on the OpenVPN interface by default (which is problematic, as this incurs latency). I thought "well, obviously, since all of this traffic is leaving on a handful of ports, I'll just redirect those to the non-VPN gateway." I've tried to look for solutions, but almost all of them involve iptables instead of ipfw (which is default for FreeBSD) and solve slightly different problems. And alternate solutions like using multiple default routes to ensure that incoming traffic on any interface is always sent out on the same interface seem far-reaching and require deep knowledge of all tools involved. Is there an elegant way of ensuring that traffic leaving on specific ports exits on a specified non-default interface using ipfw?

  Read the article

• Adobe software does not save to network share

  - by Bart van Heukelom

  I'm running Windows 7 inside virtualbox on a linux host. I have shared my linux filesystem so it's accesible in Windows under \vboxsvr\sharename. I've mounted this share on S:. For most software, it works fine. Adobe software like Photoshop has problems with it though. I can read from S: just fine, but if I try to save something it gives me the message "There are no more files". How can I make it able to write to the share?

  Read the article

• OSX Server - How to set environment variable on network user login

  - by tmkly3

  I have a group of users on my server, "Developers", and I would like an environment variable to be set for them whenever they login. More specifically, when anyone in this group logs in, I would like the equivalent of: setenv ANDROID_SDK_HOME /Developers/Android/User to be set at login. I can do this with a login script if necessary, but what I'm asking is: is it possible to set this type of thing in Profile Manager, Workgroup Manager, Directory Utility, etc? Thanks - I've looked everywhere but can't find anything.

  Read the article

• windows: force user to use specific network adapter

  - by Chad

  I'm looking for a configuration/hack to force a particular application or all traffic from a particular user to use a specific NIC. I have an legacy client/server app that has a "security feature" that limits connections based on IP address. I'm trying to find a way to migrate this app to a terminal server environment. The simple solution is for the development team to update the code in the application, however in this case that's not an option. I was thinking I might be able to install VMware NIC's installed for each user on the terminal server and do some type of scripting to force that user account to use a specific NIC. Anybody have any ideas on this? EDIT 1: I think I have a hack to work around my specific problem, however I'd love to hear of a more elegant solution. I got lucky in that the software reads the server IP address out of a config file. So I'm going to have to make a config file for each user and make a customer programs files for each user. Then add a VMware NIC for each user and make each server IP address reside on a different subnet. That will force the traffic for a particular user to a particular IP address, however its really messy and all the VM NIC's will slow down the terminal server. I'll setup a proof of concept Monday and let the group know how it affects performance.

  Read the article

• consulting a network admin for rails and php applications

  - by Karo Devos

  Hi I'm a web developer who writes most of the time rails applications. Next month I'm going to switch from my current VPS to linode. I'm wondering how much it would cost to properly set (or teach me how to do it) everything to get my app up and running. My requirements are probably: nginx/apache, REE/ruby, passenger, full blown php environment, system wide RVM, search engine such a sphinx, being able to perform cronjobs. I have some knowledge of unix and I was able to install everything I needed on my development system. However I had quite a few issues setting up everything on my production server.

  Read the article

• Curious enigma of a network cable / connection / quality

  - by Foo Bar

  So, the situation is like this: I'm renting an apartment in a large house and I'm sharing internet with the landlord who lives downstairs. The internet is (in my best guess) optical 20/20Mbit. I don't know how it's all wired in his flat (haven't been there / seen it). Anyway, in my flat comes a cable which seems to be connected directly to the optic to ethernet router (and the password is the default one, so I have access, he he). There was a switch connected to that and to wires that go around the flat, and the wiring is terrible. It's even mixing phone and ethernet, and from what I see some cables are even interconnected!? Anyways, this cable that comes to my flat is very short. I can barely connect my computer on it, but if I do, I seem to get decent speed / performance. Not great, but decent. If, however, I connect switch to it (tried 2 different switches and a wifi switch) it's all blinking but I can't even connect to 192.168.1.1 (the router). DHCP fails, ping is losing 80-100% of replies. So I connected this cable directly to the other cable which goes to my work room, with a connector that has two female jacks and no electronics. Now when I connect my computer in my room, again, the performance is decent. When I connect WRT54GL (with tomato, DHCP disabled) to it and I plug a cable in this WRT and to my computer... the performance is gone. Download seems okay on Speedtest, but upload is .2Mbps and it's connecting forever. So what kind cable troll am I having here? Any ideas?

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >