Search Results

Search found 10852 results on 435 pages for 'tool'.

Page 272/435 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Conficker keeps coming back

  - by PHLiGHT

  I hadn't run into anyone who actually got this virus until recently when dealing with a new client that didn't believe in patching their systems and consquently have been hit with this pest. I was under the impression that if you have KB958644 installed and ran the latest malicious software removal tool that conficker would be squashed. I have several systems that are fully patched, MSRT has removed the virus yet the bugger keeps coming back. This has even happened to a file server and a Domain Controller. What am I missing here? They are running AVG which I used to recommend but I have been doubting it's effectiveness over the past year or so.

  Read the article

• Windows Reformatting

  - by Shimz187

  I recently began formatting a hard drive via USB extenal drive when the power went off. When i powered it up again and connected the drive the drives dont show up under my computer. When i go to disk management, i see the drive but now it says unallocated space. The drive was initialy partitioned into 2 drives. I cant see both drives now. Tried running GetDataBack NTFS recovery tool and it only comes up with errors. There seem to be no information on the drive from the data recovery utility. I know the information is there but how do i find it. HELP!!!!

  Read the article

• windows 8 stops working after gparted

  - by Xavier T

  My laptop (windows 8.1) has a big partition so i would like to spit it into two smaller partitions. I tried hirens boot and jumped into gparted (something i have never used before) I resized windows partition (c:) and created a new partition, reboot, and my laptop cant boot I am seeing in gparted - sda1 ntfs recovery 300MB - sda2 fat32 100MB - sda3 unknown 128MB msftres - sda4 is my original C partition - sda5 is the new partition I tried with Windows 8 DVD there are options to automatically fix but it did not work. I also tried with make PC fresh or something like that and windows told me it cant fix because the drive is locked. Any help would be greatly appreciate. I stop playing with the tool now. GParted 0.7.0 of Hirens 13

  Read the article

• Amazon S3 - Storage Class and Server Side Encryption

  - by Steven

  Ahhh! I am using Amazon S3 for some low price storage to clear down out SAN. I created the bucket and created a root folder. I set the storage class to standard and server side encryption AES. I started a copy job to move the files, some files copied over and i checked the files: Reduced Redundancy Encryption set to none WTF? So i deleted all files and folders. I manuallyed created the folder structure and again set the storage class and encryption level. I coped some files and bamm, still showing (at a file level as Reduced and no encryption). So my question is this, is it really raid'd and encrypted just not showing it properly (as the root folder is, how can the file not be??) or (b) am i being a huge tool and missing something?

  Read the article

• How can we recover/restore lost/overwritten data in our MSSQL 2008 table?

  - by TeTe

  I am in serious trouble and I am seeking professional advices here. We are using MSSQL server 2008. We removed primary key, replaced exiting data with new data resulted losing our critical business data in its child tables on MSSQL Server. It was completely human mistake and we didn't have disk failure. 1) The last backup file was a month ago which means it is useless. 2) We created Maintenance Plans to backup our database at 12AM everyday but those files are nohwere to be found 3) A friend of mine said we can recover from Transaction Logs. When I go to TaskRestore Transaction log is dimmed/disabled. 4) I checked ManagementMaintenance Plans. I can't find any restored point there. It seems that our maintenance plan hasn't been working. Is there any third party tool to recover lost/overwritten data from MSSQL table? Thanks a lot.

  Read the article

• Monitoring/logging a malfunctioning internet connection

  - by Pekka

  I have a mysterious internet connection problem: Every 15-20 minutes, the connection will become very slow, and take 2-3 minutes for anything to load. I've had a technician from the ISP over here to test the hardware, and everything is in pristine condition. They have no other explanation than a configuration error on my machine, a possibility I can exclude 90% because I'm experiencing the same problems with another machine. I will have to monitor the situation now, and I would like to run a program that logs when internet connections become slow. I thought about putting something together using at and wget. Does anybody know of some other tool for this that does this out of the box - maybe something with an adjustable request frequency, logging connection speeds etc.?

  Read the article

• setreg.exe for Windows 7

  - by victoriah

  I want to use setreg.exe (http://msdn.microsoft.com/en-us/library/aa387700(VS.85).aspx) to disable the certificate revocation check. However, it's based on an older version of .NET than what I have. Microsoft says it's shipped with the older .net SDK, and when I download that, try to install, it says something like 'can't install SDK without .net 1.1'. In the article linked it says for newer versions I should use SignTool, but SignTool does not appear to have the function I need . Is it possible to either - a) find a tool that can perform the function I need that doesn't need me to install the older .NET b) get setreg.exe without downloading the SDK or do I need to install the older .NET on my machine? And if the latter is the case, what do I need to do to install an older .NET? Will it overwrite my current .NET? Thanks,

  Read the article

• What is the network address (x.x.x.0) used for?

  - by Shtééf

  It appears to be common practice to not use the first address in a subnet, that is the IP 192.168.0.0/24, or a more exotic example would be 172.20.20.64/29. The ipcalc tool I frequently use follows the same practice: $ ipcalc -n -b 172.20.20.64/29 Address: 172.20.20.64 Netmask: 255.255.255.248 = 29 Wildcard: 0.0.0.7 => Network: 172.20.20.64/29 HostMin: 172.20.20.65 HostMax: 172.20.20.70 Broadcast: 172.20.20.71 Hosts/Net: 6 Class B, Private Internet But why is that HostMin is not simply 64 in this case? The 64 address is a valid address, right? And whatever the answer, does the same apply to IPv6? Perhaps slightly related: it also appears possible to use a TCP port 0 and an UDP port 0. Are these valid or used anywhere?

  Read the article

• Tools to manage bunches of servers

  - by Stan

  Platform: most of them are Windows Server 2003, some are CentOS 5 Say if there're many game servers, is there any tools for engineers to easily manage? Below are some requirements. allow RDP (remote desktop) to servers. has group/permission setting. Classify by different functionality. So for people has permission to access certain group, they don't need further enter pwd to RDP servers, the tool will automatically log on the server. log activities: history about who has log on what server. Thanks.

  Read the article

• Is it possible to do a web search filtered for the user's comprehension level? [migrated]

  - by Tim

  Do any of the major search engines support a filter to indicate the comprehension level of the user and thus to filter out content beyond their scope? So for example, if someone wanted to find results on "astronomy", but to only show content appropriate for someone in junior-high or lower. Alternatively, if there isn't such an existing method directly, any ideas on how this might be accomplished with existing tools? I found this paper, which seems to indicate folks have looked at this, just don't know if there is a real world tool to do this.

  Read the article

• How can I avoid logging file not founds commonly caused by vulnerability scanners?

  - by agweber

  My apache logs are pretty much full of 'admin.php' not found or unable to stat and similar statements for wp-login.php, default.php, and so on that are often sought after by vulnerability scanners. Can I configure apache to avoid logging these statements for certain files? I don't want to filter out all file not founds as I'd like to fix bad links that I may have put out over the years that no longer correspond to the same files. I can use a tool like fail2ban or denyhosts, but from previous experiences it comes from so many places that those errors are still going to pile up, and the reducing those error messages are what this question is asking about.

  Read the article

• Resizing 2 partitions (NTFS and ReiserFS3)

  - by steven

  When creating a Win7 and Gentoo setup I miss allocated the space needed for Windows and Linux. I have a 320 gb drive and created a 40gb partition on Win7 and used the rest of the space on Linux. Now I need about 70gbs on the NTFS partition. Are there any tools that will shrink the ReiserFS3 partition? (It is using about 80gbs and has the reset free), while growing the NTFS partition? If I have to clone, does the tool copy freespace inside the image? I would prefer this not happen as that I'm sort on backup space. [I can handle a 100-150gb of images, but I can't copy the entire HD]

  Read the article

• Access denied for user who has full access to some files in their own folder

  - by steve02a

  I have a very similar case as this user: Access denied on some files on Win2008R2 DC share This is on a windows 2008 R2. The user has Win7 pro. The user has their own home folder on the server. Every file, except one, the user can read/write/modify at their own will. No problems - except this one file. She gets "access denied" I can open it (as domain admin). Another user can open it (because she's in the domain admin group). I did run the AccessEnum tool and the read/write permissions are all identical for all files. So, I can't explain why the user can't open this one single file. Out of all her files in sub-folders and such. No problems. This one file is causing a headache. What do you think could be wrong here?

  Read the article

• How to map a virtual desktop to a monitor in a multiple monitor setup?

  - by t3

  OS: Microsoft Windows Vista SP2, Microsoft Windows 7 My laptop is plugged to a docking station that supports dual monitors, which I use extensively. I have windows placed where I want them. All is well and predictable with this setup until I un-dock. The moment I un-dock all windows that I placed in the secondary monitor piles up in the primary monitor and it is an unholy mess. So, I am looking for a solution where if I use virtual desktops, one of them can be mapped to a monitor and when un-docked what was there in the secondary monitor stays in a virtual desktop. Do you folks know of a tool or workaround that can address my quandary?

  Read the article

• How can I monitor ports on Windows?

  - by Olav

  What is the simplest way on "local" (1*) Windows, for known ports, to: Find out if it is used. Find out as much as possible about what is behind the port. Find out as much as possible about traffic through the port. Find out if something else is interfering with the port and traffic to it. I have used Fiddler in the past, but I think that's mostly HTTP? I don't if Wire-shark does more? I think there is a tool closely integrated with Windows? Which one? (5). I am looking at NMap, but its seems to be more a suite of tools, and a high entry level. 1*: Primarily this is for what happens inside my Windows Machine, but if necessary, I can for example use a VM, or the wireless connection.

  Read the article

• Hidden Periodic Screenshots on a corporate workstation?

  - by ssxuser80

  Can anyone recommend something that allows us to take hidden periodic screenshots of a workstation? We have a user who we believe is abusing his computer privileges. We have our suspicions that he may be playing games, etc. We need to monitor his screen without him being aware of it. Currently, the IT Department here is using Dameware Mini Remote Control to view his login sessions. But there isn't an option to set up automatic periodic screenshots. I'm hoping to find a tool that has this option and can be centrally managed as well. Thank you for your time. Any help would be greatly appreciated.

  Read the article

• Can SysPrep (or anything else) be used to make a Win XP partition from another computer bootable?

  - by chris5gd

  I've used Paragon Backup and Recovery Free as recommended to me in my other question, to backup my C: (Win XP) and D: (installed apps) partitions. Before taking the rather scary step of breaking the RAID 0 array on which it's currently installed, and restoring to one of the individual drives, I'd quite like to test the restorability of the imaged partitions. I've restored them on to a spare disk in another computer, which of course won't boot from them in their current state. Is it possible to use SysPrep (or another tool) on the restored partitions, to make it bootable?

  Read the article

• Why can't I use %USERPROFILE% in %PATH%?

  - by Zano

  On my Windows 7 machine, using the System Properties Environment Variables tool, I try to add %USERPROFILE%\Bin to the system variable PATH. For some reason, that doesn't work, even though %SystemRoot%\system32 works fine. When I try to run commands from the console, files in my Bin folder are not found, even though files in the System32 folder are found. The only difference between UserProfile and SystemRoot that I can see is that the former is a user variable while the latter is a system variable. I i write echo %USERPROFILE%\Bin it yields c:\Users\zano, and if I add c:\Users\zano\Bin explicitly, everything work fine. What's the problem here?

  Read the article

• I want to "image" 40+ laptops quickly...i welcome suggestions on reliable software

  - by Joldfield101

  I often have batches of laptops/PC's to re-image and have tried various methods, but each of them has been problematic and often take more time to troubleshoot than it would have been to image them individually! For example, i have tried to use ghost - i installed ghostcast server on my laptop but the clients never seem to boot to LAN successfully, or it takes an hour to get everything sorted (drivers, LAN, DHCP etc etc). I want a reliable tool that makes imaging quick and easy - and i don't mind paying for it if it's going to work (but obviously free = always good!)

  Read the article

• Bacula configuration for clients that are turned on and off randomly

  - by Rastloser

  I'm evaluating Bacula as a centralized backup tool for a small network where users will turn machines on and off unpredictably. Some of the headless Linux boxes I need to back up are intended to be turned off by pressing the on/off-button on the case, without any way of telling the user to wait for a backup job to finish. So, we don't know when backup jobs may run (anacron might help with this, right?) and we don't know whether they'll be allowed to finish. Is Bacula a reasonable choice for such an environment?

  Read the article

• How to recover the data from the crashed (external) hard disk drive (NTFS)?

  - by shveerab

  The 300 GB harddisk has 2 partitions,90 GB and 200 GB! I can see the drives in windows(XP) but unable to access them, the file system is shown as RAW, 0 used space and 0 free space!..chkdsk returns the error "unable to determine volume version and date. chkddsk aborted." Is the MBR corrupt? How do I restore it? TestDisk tool isn't recognizing the partitions and says invalid entry for heads/cylinder, 15 and should be 255 and suggests to change it..Should I go ahead and change it? Please advise!

  Read the article

• Is it safe to sync a Firefox instance in both directions?

  - by java.is.for.desktop

  Hello, everyone! I want to use some tool (not decided yet, which one) to sync a Firefox instance (more exact: user directory) between two machines. (EDIT: I want really to sync everything in the user-directory) Would you assume, that this is safe? What would happen, if some files are newer on the one machine, and some other files are newer on the other machine? Could this lead to inconsistencies, when, let's say, there are some inter-file references? If general, I don't have good experience with syncing application in both directions. Most applications seem not to be suited for this.

  Read the article

• How can I rename files and subdirectories in a copied directory based on changes in the original?

  - by GaryF

  I have a directory structure with many hundreds of files and folders underneath it for organising files (in this case photos). I create backups of that directory structure by rsyncing it to identical copies on an external drives periodically. These drives may be offsite some of the time. I want to restructure and rename the files and directories in the original and then, later, when I have an external drive onsite, be able to run some tool that will cause these structural and naming changes to happen on the backup. If I just us rsync, it'll have to recopy much of the data to the backup drive, which I'd rather avoid due to the sizes involved. How can I get the changes I make to the original directory into the backups, as they become available, without having to recopy/rsync the data?

  Read the article

• How to convert WinXP + Apps on RAID0 to use just one of the two RAID disks?

  - by chris5gd

  I have two 150GB SATA drives in hardware RAID 0, on which I have my C: (Win XP) and D: (installed apps). I'm migrating to Windows 7, but I want to keep my XP system until I've got it all running smoothly. So I want to: break the RAID move C: and D: to one of the drives (there's enough room) use the other drive for Win 7 boot into one or the other Clearly I can't move C: and D: after breaking the RAID, so I'm assuming I need to image the two partitions first, then break the RAID and restore the images to one of the drives. So my questions are: Is this possible? If so, what would be a good (free) imaging/restore tool? How do I ensure that the drive will boot after restoring the images? What sort of gotchas should I look out for? If there's a better solution than this, I'd be grateful for suggestions. Thanks!

  Read the article

• Image annotation with Inkscape, Pointer and explanation for objects in picture

  - by None

  I need straight paths with end markers for associating text to parts of the image. For better readability, it needs to be high-contrast, i.e. a white line with black outline. Stroke to path will create a group of a box and a circle from the line with end marker. This makes placement of the markers more difficult, as with the node tool it is just a matter of dragging the end nodes of a line segment. I will try to place the markers as line for now and only finally converting them to an outline.

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >