Search Results

Search found 8611 results on 345 pages for 'apt fast'.

Page 274/345 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Block-level deduplicating filesystem

  - by James Haigh

  I'm looking for a deduplicating copy-on-write filesystem solution for general user data such as /home and backups of it. It should use online/inline/synchronous deduplication at the block-level using secure hashing (for negligible chance of collisions) such as SHA256 or TTH. Duplicate blocks need not even touch the disk. The idea is that I should be able to just copy /home/<user> to an external HDD with the same such filesystem to do a backup. Simple. No messing around with incremental backups where corruption to any of the snapshots will nearly always break all later snapshots, and no need to use a specific tool to delete or 'checkout' a snapshot. Everything should simply be done from the file browser without worry. Can you imagine how easy this would be? I'd never have to think twice about backing-up again! I don't mind a performance hit, reliability is the main concern. Although, with specific implementations of cp, mv and scp, and a file browser plugin, these operations would be very fast, especially when there is a lot of duplication as they would only need to transfer the absent blocks. Accidentally using conventional copy tools that do not integrate with the FS would merely take longer, waste some bandwidth when copying remotely and waste some CPU, as the duplicate data would be re-read, re-transferred and re-hashed (although nothing would be re-written), but would absolutely not corrupt anything. (Some filesharing software may also be able to benefit by integrating with the FS.) So what's the best way of doing this? I've looked at some options: lessfs - Looks unmaintained. Any good? [Opendedup/SDFS][3] - Java? Could I use this on Android?! What does [SDFS][4] stand for? [Btrfs][5] - Some patches floating around on mailing list archives, but no real support. [ZFS][6] - Hopefully they'll one day relicense under a true Free/Opensource GPL-compatible licence. Also, 2 years ago I had a go at an attempt in Python using Fuse at the file-level to be used over the top of a typical solid FS such as EXT4, but I found Fuse for Python underdocumented and didn't manage to implement all of the system calls. My first post here, so I can't post more than 2 links until I get over 10 rep: [3]: http://www.opendedup.org/ [4]: https://en.wikipedia.org/w/index.php?title=SDFS&action=edit&redlink=1 [5]: https://en.wikipedia.org/wiki/Btrfs#Features [6]: https://en.wikipedia.org/wiki/ZFS#Linux

  Read the article

• Loose Coupling and UX Patterns for Applications Integrations

  - by ultan o'broin

  I love that software architecture phrase loose coupling. There’s even a whole book about it. And, if you’re involved in enterprise methodology you’ll know just know important loose coupling is to the smart development of applications integrations too. Whether you are integrating offerings from the Oracle partner ecosystem with Fusion apps or applications coexistence scenarios, loose coupling enables the development of scalable, reliable, flexible solutions, with no second-guessing of technology. Another great book Enterprise Integration Patterns: Designing, Building, and Deploying Messaging Solutions tells us about loose coupling benefits of reducing the assumptions that integration parties (components, applications, services, programs, users) make about each other when they exchange information. Eliminating assumptions applies to UI development too. The days of assuming it’s enough to hard code a UI with linking libraries called code on a desktop PC for an office worker are over. The book predates PaaS development and SaaS deployments, and was written when web services and APIs were emerging. Yet it calls out how using middleware as an assumptions-dissolving technology “glue" is central to applications integration. Realizing integration design through a set of middleware messaging patterns (messaging in the sense of asynchronously communicating data) that enable developers to meet the typical business requirements of enterprises requiring integrated functionality is very Fusion-like. User experience developers can benefit from the loose coupling approach too. User expectations and work styles change all the time, and development is now about integrating SaaS through PaaS. Cloud computing offers a virtual pivot where a single source of truth (customer or employee data, for example) can be experienced through different UIs (desktop, simplified, or mobile), each optimized for the context of the user’s world of work and task completion. Smart enterprise applications developers, partners, and customers use design patterns for user experience integration benefits too. The Oracle Applications UX design patterns (and supporting guidelines) enable loose coupling of the optimized UI requirements from code. Developers can get on with the job of creating integrations through web services, APIs and SOA without having to figure out design problems about how UIs should work. Adding the already user proven UX design patterns (and supporting guidelines to your toolkit means ADF and other developers can easily offer much more than just functionality and be super productive too. Great looking application integration touchpoints can be built with our design patterns and guidelines too for a seamless applications UX. One of Oracle’s partners, Innowave Technologies used loose coupling architecture and our UX design patterns to create an integration for a customer that was scalable, cost effective, fast to develop and kept users productive while paving a roadmap for customers to keep pace with the latest UX designs over time. Innowave CEO Basheer Khan, a Fusion User Experience Advocate explains how to do it on the Usable Apps blog.

  Read the article

• Moms on Mobile: Are They Way Ahead of You?

  - by Mike Stiles

  You may have no idea how much and how fast moms are embracing mobile. Of all the demographics that can be targeted by marketers, moms have always been at or near the top of the list. And why not? They’re running households, they’re all over town, they’re making buying decisions, and they’re influencing family and friends. They, out of necessity, become masters of efficiency and time management. So when a technology tool, like mobile, comes along that assists with that efficiency and time management, we would obviously expect them to take advantage of it. So if it’s obvious, why are so many big, sophisticated brands left choking on the dust of moms who have zoomed past them in the adoption of mobile, and social on mobile? Let’s break down some hard truths as presented by a Mojiava report: -Moms spend 6.1 hours per day on average on their smartphones – more than magazines, TV or radio. -46% took action after seeing a mobile ad. -51% self-identify as “addicted” to their smartphone. -Households with an income of $25K-$50K have about the same mobile penetration among moms as those with incomes of $50K-$75K. So mobile is regarded as a necessity for middle-class moms. -Even moms without smartphones spend 2.5 hours on average per day on some connected mobile device. -Of moms with such devices, 9.8% have an iPad, 9.5% a Kindle and 5.7% an iPod Touch. -Of tablet-owning moms, 97% bought something using their tablet in the last month. -31% spend over 10 hours per week on their tablet, but less than 2 hours per week on their PCs. -62% of connected moms use shopping apps. -46% want to get info on their mobile while in a store. -Half of connected moms use social on their mobile. And they’re engaged. 81% are brand fans, 86% post updates, and 84% comment. If women and moms are one of your primary targets and you find yourself with no strong social channels where content is driving engagement and relationship-building, with sites not optimized for mobile, or with no tablet or smartphone apps, you have been solidly left behind by your customers and prospects. And their adoption of mobile and social on mobile is only exponentially speeding up, not slowing down. How much sense does it make when your customer is ready to act on your mobile ad, wants to user your iPad app to buy something from you, wants to be your fan on Facebook, wants to get messages and deals from you while they’re in your store…but you’re completely absent? I’ll help you cheat on the test by giving you the answer…no sense at all. Catch up to momma.

  Read the article

• Evolution laggy due to IMAP -profile or due to some odd Sync -issue?

  - by Izzy

  I'm fighting with Evolution. Basically it's working fine -- but it is very slow to react in certain situations. Helper questions Could it be that changing away from Bonobo has to do with slowing-down? There might be some trouble with the new engine and "asynchronous actions". What to do about it? Are there e.g. any configuration files? I want to get the previous "working mood" back. How can I speed this thing up? Different scenarios when sending a mail, the composer window hangs there inactive for a couple of seconds, everything grayed out. Though there is a green check mark saying it's sent, I'm not sure a) why it's still blocking everything and b) whether I could simply close it without "breaking"/"losing" anything. In earlier versions, the composer window was closing pretty fast, and one could see the message being stored into the local "outbox" until it was sent, and one could immediately continue with the next task. I prefer that behaviour over the current, where I cannot do anything in the application until the window closes. switching between modules. Coming from mail and switching to the address book takes a couple of seconds. Same for switching to the calendar. I read about different "possible causes" and tried a few things: I only have 3 local address books, so no networking should be involved here. To make sure, I switched to offline mode and then tried to access the address book. No noticeable difference. I use 3 Google Calendars. Switching to offline mode made a minor difference, but so minor that it also could be "imagination" since one might have expected this in this case according to some reports, disabling the tasks should help. Well, it didn't in my case, as I don't use them regularly (just two local items stored here) Maybe I should also mention that I'm using the KDE4 desktop (so no Unity or Gnome, though both is installed on the computer). And I did not have this issue before I updated to 12.04.

  Read the article

• Innovation for Retailers

  - by David Dorf

  One of my main objectives for this blog is to point out emerging technologies and how they might apply to the retail industry.  But ideas are just the beginning; retailers either have to rely on vendors or have their own lab to explore these ideas and see which ones work.  (A healthy dose of both is probably the best solution.)  The Nordstrom Innovation Lab is a fine example of dedicating resources to cultivate ideas and test prototypes. The video below, from 2011, is a case study in which the team builds an iPad app that helps customers purchase sunglasses in the store.  Customers take pictures of themselves wearing different sunglasses, then can do side-by-side comparisons. There are a few interesting take-aways from their process.  First, they are working in the store alongside employees and customers.  There's no concept of documenting all the requirements then building the product.  Instead, they work closely with those that will be using the app in order to fully understand what's needed.  When they find an issue, they change the software onsite and try again.  This iterative prototyping ensures their product hits the mark.  Feels like Extreme Programming if you recall that movement. Second, they have time-boxed the project to one week.  Either it works or it doesn't, and either way they've only expended a week's worth of resources.  Innovation always entails failure, and those that succeed are often good at detecting failure quickly then adjusting.  Fail fast and fail often. Third, its not always about technology.  I was impressed they used paper designs to walk through user stories and help understand the needs of the customer.  Pen and paper is the innovator's most powerful tool. Our Retail Applied Research (RAR) team uses some of these concepts in our development process.  (Calling it a process is probably overkill.)  We try to give life to concepts quickly so the rest of organization can help us decide if we're heading the right direction.  It takes many failures before finding a successful product.

  Read the article

• Gnome-shell fails to load on 12.10

  - by Githlar

  I'm usually the one answering questions, but in this I'm throughly stumped! My Setup: Ubuntu 12.10 (Dist upgrade form 12.04) ATI M96 [Mobility Radeon HD 4650] Upon the first installation of 12.10 I had all kinds of issues getting the Legacy ATI drivers to install (I guess the source for the drivers isn't kosher with kernel 3.5). So, I added the repository ppa:makson96/fglrx - which has a version of the ATI source patched to work with kernel 3.5. After installation of fglrx-legacy from that PPA, gnome-shell and all my graphics work fine... until today. The Problem I unsuspended my computer today and the screen was black (not off, the black from the gnome lock screen). I'd move my mouse/hit a key and the background would flash and then it'd go back to black. Restarted via VT1 Logged into Gnome (gnome-shell) session, but no gnome-shell! Investigation: First, I went to VT1 and tried export DISPLAY=:0;gnome-shell --replace. It appeared to work fine, switch back to X and nothing. Went back to VT1 and saw this error message: JS ERROR: !!! Exception was: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO JS ERROR: !!! message = '"Object 0x7fc748129c30 is not a subclass of (null), it's a xO"' JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/tweener.js"' JS ERROR: !!! lineNumber = '218' JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/tweener.js:218 wrapper()@/usr/share/gjs-1.0/lang.js:204 ()@/usr/share/gjs-1.0/lang.js:145 ()@/usr/share/gjs-1.0/lang.js:239 init()@/usr/share/gnome-shell/js/ui/tweener.js:49 init()@/usr/share/gnome-shell/js/ui/environment.js:96 @<main>:1 "' Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO Note: Everywhere it says "it's a xO", xO is actually garbled and changes every time (I'm thinking memory corruption?) This error is thrown by line 96 of /usr/share/gnome-shell/js/ui/environment.js: tweener.Init() Did a purge of fglrx-legacy, reboot, reinstall fglrx-legacy, reboot... same thing. Did a ppa-purge of ppa:gnome3-team/gnome3, and reinstalled gnome-shell and ubuntu-desktop from the standard repositores... same thing. I'm really at a loss here. I love gnome-shell and after using it for nearly a year now gnome classic just seems so archaic. Additional Information Apt log from the day I first suspended my machine (these are upgrades from the gnome3-team/gnome3 ppa and ubuntu-wine/ppa ppa): Start-Date: 2012-11-24 17:30:28 Commandline: aptdaemon role='role-commit-packages' sender=':1.618' Install: gkbd-capplet:amd64 (3.6.0-0ubuntu1), gnome-control-center-unity:amd64 (1.0-0ubuntu1~ubuntu12.10.1) Upgrade: nautilus:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), libgnome-control-center1:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), wine1.5-i386:i386 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), wine1.5:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), gnome-settings-daemon:amd64 (3.4.2-0ubuntu14, 3.6.3-0ubuntu1~ubuntu12.10.1), gnome-control-center-data:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), gnome-accessibility-themes:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), gnome-themes-standard:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), wine1.5-amd64:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), nautilus-data:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), gnome-control-center:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), libnautilus-extension1a:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1) End-Date: 2012-11-24 17:31:32 fglrxinfo (driver appears to be working): display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 4650 OpenGL version string: 3.3.11653 Compatibility Profile Context Does anybody have any further ideas?

  Read the article

• Wireless connection works but the internet is too slow to use in Ubuntu 11.04

  - by Garrin

  The internet is so slow as to be unusable. And I'm not being picky. Even after minutes I can't get my Google home page to load. I tried installing a package through apt-get and was getting rates between 0 and a few hundred bytes/s. That's bytes, not kilobytes! Mostly 0 however (no exaggeration, it spends large amounts of time stalled). And I would go to a speed test web site of some kind but I can't since nothing will load. Briefly put, the laptop I am using was connected to two wireless networks while using Ubuntu 11.04 without any issues before this. It was also connected to a wired network without any issues. It dual boats Windows 7 which has never had any issues, not even with the current wireless network. Just to be clear, on the current wi-fi network, Windows 7 encounters no issues (speedtest.net puts the network speed at 1mb/s) but my network connection in Ubuntu 11.04 is so slow as to literally be unusable. I am unfamiliar with the router except for the fact that it boasts a Rogers logo (that's a large ISP/cable provider in Canada for those not familiar with the land of igloos and polar bears). I am far from the router and some desktop widget I use tells me the signal strength is at 58% (it seems fairly reliable and this would appear to match up with the filled bars in the network icon). I should also mention I'm just renting a room in this house so I'm not the network administrator and while I can access the 192.168.0.1 router page, the password wasn't set to 'password' so it's not much use to me. Here are a bunch of commands I ran which don't tell me a whole lot but I thought might be more instructive to the wise around here: lspci (just showing my network card): 05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) This one is self explanatory. PING www.googele.com (216.65.41.185) 56(84) bytes of data. 64 bytes from nnw.net (216.65.41.185): icmp_req=1 ttl=51 time=267 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=2 ttl=51 time=190 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=3 ttl=51 time=212 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=4 ttl=51 time=207 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=5 ttl=51 time=220 ms --- www.googele.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 190.079/219.699/267.963/26.121 ms ifconfig eth0 Link encap:Ethernet HWaddr 20:6a:8a:02:20:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:960 (960.0 B) TX bytes:960 (960.0 B) wlan0 Link encap:Ethernet HWaddr 20:7c:8f:05:c6:bf inet addr:192.168.0.16 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::227c:8fff:fe05:c6bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:982 errors:0 dropped:0 overruns:0 frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:497250 (497.2 KB) TX bytes:95076 (95.0 KB) Thank you

  Read the article

• PBCS Hyperion Planning in the Cloud Implementation Workshop

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Oracle Planning and Budgeting Cloud Service (PBCS) opens up opportunities for organizations of all sizes to streamline planning and forecasting, accelerate deployment, and reduce costs. This one-day in-person workshop is delivered by Oracle Development (free to OPN member partners), and will cover the handoff from selling-to-implementing of PBCS. Although the basic building blocks are the same as with on-premises Planning, there is a paradigm shift when it comes to selling and implementing a Cloud Service solution. The value proposition behind Oracle Planning and Budgeting Cloud Service is all about the deployment model, how it’s sold and how it gets implemented – simplicity, fast adoption and flexible deployment, without sacrificing first-class functionality. To be successful, the entire cycle from sales to implementation should consistently support this value proposition to your clients. This training event is for OPN member partners whose business roles involve presales, implementation consulting, and support. This workshop briefly reviews the sales approach, as background, with emphasis on partner sales support. The main objective is to learn what is needed to successfully implement Oracle Planning and Budgeting Cloud Service once the sales hand off is made – how to leverage your current Hyperion Planning knowledge and use the features designed specifically to build out a Cloud Service solution. This Workshop is being offered at three locations for partners from all countries in EMEA: June 24, 2014: Kista, Sweden June 26, 2014: Reading, United Kingdom June 29-30, 2014 (split days): Dubaï, United Arab Emirates To get more information, to check pre-requisites, and to register, click here. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Top 10 Reasons to Attend the 7th Annual Maintenance Summit

  - by Stephen Slade

  Some of you may be sitting the fence before registering for the Oracle Maintenance Summit 2013. Here are 10 solid reasons to register in the next 3 weeks: 1. It's the 'IN' red carpet maintenance event for 2013. The summit will have one of the greatest concentrations of maintenance best practices, case studies and success stories that can catapult your organization. 2.  Return a Hero! Hear how you can drive reliability and operational excellence back home at the plant!  3. Learn the Roadmap! Hear form product experts who will discuss the vision, strategy and roadmap for Oracle products 4. See Product Demos! All the SCM/EAM rich products will be exhibited by both sales consultants and developers. Ask the hardest question you can think of and be ready for a great response. 5. Meet our Partners! There will be a good number of supporting partners exhibiting at the summit. Hear and learn of what ingredients make for success. 6. Join a panel or discussion group! Raise your hand and be heard – have your questions answered. Contribute to the discussion. 7. Network with your peers. Rub elbows with your fellow maintenance managers and operations supervisors. Talk shop here! 8. 6 Summits under one roof. Hear and share supply chain information at one of the other summits taking place concurrently. Bring other team members and secure the group discount. 9. Save $100, register by Dec 31 for the early bird rate. Hotel will fill fast.  www.oracle.com/goto/vcs 10. Have a great time! The Summit is both informational and enjoyable. Set at the waterfront in downtown San Francisco at the Embarcadero, the summit will be a fun-filled and enjoyable experience.

  Read the article

• How to cleanly add after-the-fact commits from the same feature into git tree

  - by Dennis

  I am one of two developers on a system. I make most of the commits at this time period. My current git workflow is as such: there is master branch only (no develop/release) I make a new branch when I want to do a feature, do lots of commits, and then when I'm done, I merge that branch back into master, and usually push it to remote. ...except, I am usually not done. I often come back to alter one thing or another and every time I think it is done, but it can be 3-4 commits before I am really done and move onto something else. Problem The problem I have now is that .. my feature branch tree is merged and pushed into master and remote master, and then I realize that I am not really done with that feature, as in I have finishing touches I want to add, where finishing touches may be cosmetic only, or may be significant, but they still belong to that one feature I just worked on. What I do now Currently, when I have extra after-the-fact commits like this, I solve this problem by rolling back my merge, and re-merging my feature branch into master with my new commits, and I do that so that git tree looks clean. One clean feature branch branched out of master and merged back into it. I then push --force my changes to origin, since my origin doesn't see much traffic at the moment, so I can almost count that things will be safe, or I can even talk to other dev if I have to coordinate. But I know it is not a good way to do this in general, as it rewrites what others may have already pulled, causing potential issues. And it did happen even with my dev, where git had to do an extra weird merge when our trees diverged. Other ways to solve this which I deem to be not so great Next best way is to just make those extra commits to the master branch directly, be it fast-forward merge, or not. It doesn't make the tree look as pretty as in my current way I'm solving this, but then it's not rewriting history. Yet another way is to wait. Maybe wait 24 hours and not push things to origin. That way I can rewrite things as I see fit. The con of this approach is time wasted waiting, when people may be waiting for a fix now. Yet another way is to make a "new" feature branch every time I realize I need to fix something extra. I may end up with things like feature-branch feature-branch-html-fix, feature-branch-checkbox-fix, and so on, kind of polluting the git tree somewhat. Is there a way to manage what I am trying to do without the drawbacks I described? I'm going for clean-looking history here, but maybe I need to drop this goal, if technically it is not a possibility.

  Read the article

• Gnome Install Error (1)

  - by Guy1984

  I'm trying to install Gnome on my Ubuntu 12.04 P.Pangolin and getting the following errors: root@***:~# sudo apt-get install gnome-core gnome-session-fallback Reading package lists... Done Building dependency tree Reading state information... Done gnome-core is already the newest version. gnome-session-fallback is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded. 5 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up bluez (4.98-2ubuntu7) ... start: Job failed to start invoke-rc.d: initscript bluetooth, action "start" failed. dpkg: error processing bluez (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of gnome-bluetooth: gnome-bluetooth depends on bluez (>= 4.36); however: Package bluez is not configured yet. dpkg: error processing gnome-bluetooth (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gnome-shell: gnome-shell depends on gnome-bluetooth (>= 3.0.0); however: Package gnome-bluetooth is not configured yet. dpkg: error processing gnome-shell (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gnome-user-share: gnome-user-share depends on gnome-bluetooth; however: Package gnome-bluetooth is not configured yet. dpkg: error processing gnome-user-share (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gnome-core: gnome-core depends on gNo apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already nome-bluetooth (>= 3.0); however: Package gnome-bluetooth is not configured yet. gnome-core depends on gnome-shell (>= 3.0); however: Package gnome-shell is not configured yet. gnome-core depends on gnome-user-share (>= 3.0); however: Package gnome-user-share is not configured yet. dpkg: error processing gnome-core (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: bluez gnome-bluetooth gnome-shell gnome-user-share gnome-core E: Sub-process /usr/bin/dpkg returned an error code (1) Syslog: Oct 5 16:04:17 ks34900 bluetoothd[5176]: Bluetooth daemon 4.98 Oct 5 16:04:17 ks34900 bluetoothd[5176]: Starting SDP server Oct 5 16:04:17 ks34900 bluetoothd[5176]: opening L2CAP socket: Address family not supported by protocol Oct 5 16:04:17 ks34900 bluetoothd[5176]: Server initialization failed Oct 5 16:04:17 ks34900 bluetoothd[5176]: Failed to init alert plugin Oct 5 16:04:17 ks34900 bluetoothd[5176]: Failed to init time plugin Oct 5 16:04:17 ks34900 bluetoothd[5176]: Failed to init proximity plugin Oct 5 16:04:17 ks34900 bluetoothd[5176]: Failed to open control socket: Address family not supported by protocol (97) Oct 5 16:04:17 ks34900 bluetoothd[5176]: Can't init bnep module Oct 5 16:04:17 ks34900 bluetoothd[5176]: Failed to init network plugin Oct 5 16:04:17 ks34900 bluetoothd[5176]: Unable to start SCO server socket Oct 5 16:04:17 ks34900 bluetoothd[5176]: Failed to init audio plugin Oct 5 16:04:17 ks34900 bluetoothd[5176]: Failed to init gatt_example plugin Oct 5 16:04:17 ks34900 bluetoothd[5176]: Can't open HCI socket: Address family not supported by protocol (97) Oct 5 16:04:17 ks34900 bluetoothd[5176]: adapter_ops_setup failed Oct 5 16:04:17 ks34900 kernel: init: bluetooth main process (5176) terminated with status 1 Oct 5 16:04:17 ks34900 kernel: init: bluetooth main process ended, respawning Oct 5 16:04:17 ks34900 bluez: Stopping uarts Oct 5 16:04:17 ks34900 bluez: Stopping rfcomm Any thoughts?

  Read the article

• How can we unify business goals and technical goals?

  - by BAM

  Some background I work at a small startup: 4 devs, 1 designer, and 2 non-technical co-founders, one who provides funding, and the other who handles day-to-day management and sales. Our company produces mobile apps for target industries, and we've gotten a lot of lucky breaks lately. The outlook is good, and we're confident we can make this thing work. One reason is our product development team. Everyone on the team is passionate, driven, and has a great sense of what makes an awesome product. As a result, we've built some beautiful applications that we're all proud of. The other reason is the co-founders. Both have a brilliant business sense (one actually founded a multi-million dollar company already), and they have close ties in many of the industries we're trying to penetrate. Consequently, they've brought in some great business and continue to keep jobs in the pipeline. The problem The problem we can't seem to shake is how to bring these two awesome advantages together. On the business side, there is a huge pressure to deliver as fast as possible as much as possible, whereas on the development side there is pressure to take your time, come up with the right solution, and pay attention to all the details. Lately these two sides have been butting heads a lot. Developers are demanding quality while managers are demanding quantity. How can we handle this? Both sides are correct. We can't survive as a company if we build terrible applications, but we also can't survive if we don't sell enough. So how should we go about making compromises? Things we've done with little or no success: Work more (well, it did result in better quality and faster delivery, but the dev team has never been more stressed out before) Charge more (as a startup, we don't yet have the credibility to justify higher prices, so no one is willing to pay) Extend deadlines (if we charge the same, but take longer, we'll end up losing money) Things we've done with some success: Sacrifice pay to cut costs (everyone, from devs to management, is paid less than they could be making elsewhere. In return, however, we all have creative input and more flexibility and freedom, a typical startup trade off) Standardize project management (we recently started adhering to agile/scrum principles so we can base deadlines on actual velocity, not just arbitrary guesses) Hire more people (we used to have 2 developers and no designers, which really limited our bandwidth. However, as a startup we can only afford to hire a few extra people.) Is there anything we're missing or doing wrong? How is this handled at successful companies? Thanks in advance for any feedback :)

  Read the article

• "The connection has timed out" - Please help!

  - by gon

  I recently installed a fresh Ubuntu 12.04 LTS on a desktop, and the installation itself was successful (other than 'grub rescue' issue that I encountered but fixed) but this connection problem is really giving me a headache. Symptoms: 1. When I open the FireFox browser and try to connect to a website, it just hangs for a while saying "Connecting..." but eventually loads an error page "The connection has timed out". 2. It's not a browser problem (and I tried setting ipv6 thing to "true" at about:config) because running "sudo apt-get install [some-random-package]" at terminal fails ("E: Unable to locate package [package]") too. All other operations that need internet access are not working. 3. I certainly see a wired network (called "eth1") at the Network Manager, and it says "Connection Established" after disconnecting and then connecting again. I have tried almost everything that could be found from google search results still no luck. Their problems slightly differ from mine or the solutions just don't work. By the way it didn't have internet access when installing Ubuntu 12.04. (I ignored the message that I need internet to install Ubuntu) Could this be a problem? I'm sorry I don't remember if internet worked or not on the previous version of Ubuntu. :( I would really appreciate your help... I don't even know what more to do if this fails too.. Thanks!! Thanks for your comment. Here is the result of ifconfig: eth0 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b9 inet addr:10.10.65.185 Bcast:10.10.65.255 Mask:255.255.255.0 inet6 addr: fe80::7aac:c0ff:fe3d:b2b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3907 errors:0 dropped:0 overruns:0 frame:0 TX packets:771 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:393118 (393.1 KB) TX bytes:73472 (73.4 KB) Interrupt:16 eth1 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204 (204.0 B) TX bytes:204 (204.0 B) route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.10.65.1 0.0.0.0 UG 0 0 0 eth0 10.10.65.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 /etc/resolv.conf: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 8.8.4.4 nameserver 10.81.1.8 nameserver 10.1.2.10 nameserver 127.0.0.1 search yamatake.local /etc/network/interfaces: auto lo iface lo inet loopback #auto eth0 #iface eth0 inet dhcp #auto eth1 #iface eth1 inet dhcp And I'll also include the result of 'sudo lshw -C network' in case it might help: *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 78:ac:c0:3d:b2:b9 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 ip=10.10.65.185 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:93 memory:fc000000-fc00ffff *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth1 version: 10 serial: 78:ac:c0:3d:b2:b8 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:94 memory:fb000000-fb00ffff

  Read the article

• After startup, display reverts to one desktop duplicated on both screens

  - by Skilldrick

  I have a Samsung R530 laptop. I'm actually running Linux Mint, which is based on Ubuntu (which is why I thought it would be OK to post this here). I'm now getting exactly the same problem on Ubuntu 10.10. I've got it setup with a secondary LCD monitor, and I've changed the display settings so the laptop screen and monitor are at optimal resolution, with the desktop shared between them. After startup though (typically around 10-30 seconds) the display reverts to 1024 x 768 on both screens, and the display is duplicated (i.e. both screens show the same thing). I think this is something to do with my video card, as I had the same problem when I was running Arch Linux. Any ideas? Edit: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller It seems it's Intel, not Nvidia. I have a current work around, which is to have a launcher to a script containing xrandr --output LVDS1 --mode 1366x768 --output HDMI1 --mode 1280x1024 --left-of LVDS1 on my desktop, and to run it after the displays revert, but it's not ideal.

  Read the article

• Asynchronously returning a hierarchal data using .NET TPL... what should my return object "look" like?

  - by makerofthings7

  I want to use the .NET TPL to asynchronously do a DIR /S and search each subdirectory on a hard drive, and want to search for a word in each file... what should my API look like? In this scenario I know that each sub directory will have 0..10000 files or 0...10000 directories. I know the tree is unbalanced and want to return data (in relation to its position in the hierarchy) as soon as it's available. I am interested in getting data as quickly as possible, but also want to update that result if "better" data is found (better means closer to the root of c:) I may also be interested in finding all matches in relation to its position in the hierarchy. (akin to a report) Question: How should I return data to my caller? My first guess is that I think I need a shared object that will maintain the current "status" of the traversal (started | notstarted | complete ) , and might base it on the System.Collections.Concurrent. Another idea that I'm considering is the consumer/producer pattern (which ConcurrentCollections can handle) however I'm not sure what the objects "look" like. Optional Logical Constraint: The API doesn't have to address this, but in my "real world" design, if a directory has files, then only one file will ever contain the word I'm looking for.  If someone were to literally do a DIR /S as described above then they would need to account for more than one matching file per subdirectory. More information : I'm using Azure Tables to store a hierarchy of data using these TPL extension methods. A "node" is a table. Not only does each node in the hierarchy have a relation to any number of nodes, but it's possible for each node to have a reciprocal link back to any other node. This may have issues with recursion but I'm addressing that with a shared object in my recursion loop. Note that each "node" also has the ability to store local data unique to that node. It is this information that I'm searching for. In other words, I'm searching for a specific fixed RowKey in a hierarchy of nodes. When I search for the fixed RowKey in the hierarchy I'm interested in getting the results FAST (first node found) but prefer data that is "closer" to the starting point of the hierarchy. Since many nodes may have the particular RowKey I'm interested in, sometimes I may want to get a report of ALL the nodes that contain this RowKey.

  Read the article

• What's Happening in Business Analytics at OpenWorld 2012?

  - by jmorourke

  Oracle OpenWorld 2012 is rapidly approaching on September 30th when we take over the city of San Francisco for five days.  The Business Analytics this year is our strongest ever with over 150 EPM, BI, Analytics and Data Warehousing sessions delivered by Oracle, our customers and partners.  We’ll also have Hands-On Labs, 20 demo pods dedicated to Business Analytics products, and over 30 partners exhibiting their solutions.  So what’s hot in the Business Analytics program at OpenWorld?  Here are some of the “can’t miss” sessions at this year’s conference: The EPM and BI general sessions, led by SVP of Product Development Balaji Yelamanchili will highlight what’s new provide a view into Oracle’s EPM, BI and Analytics strategies.  Both sessions are scheduled on Monday, October 1st. Thursday Keynote:  See More, Act Faster:  Oracle Business Analytics, led by Oracle President Mark Hurd, will provide a view into Oracle’s strategy for Business Analytics, especially engineered systems designed to provide extreme performance for the most rigorous analytic tasks. Superfast Business Intelligence with Oracle Exalytics.  Hear about various business intelligence scenarios in which Oracle Exalytics provides exemplary value—from operational reporting and prepackaged applications to analytics on unstructured data. Turn Insights into Real-Time Actions with Oracle Business Intelligence Mobile.  Learn how Oracle Business Intelligence Mobile enables organizations to deliver relevant information and turn insight into real-time action, no matter where employees are located. Empowering the Business User: Introduction to Oracle Endeca Information Discovery.  Find out how you can find fast answers to the new questions that confront your business every day, while avoiding the confusion and inconsistencies brought about by spreadsheets and desktop tools. Big Data:  The Big Story.  Learn how to harness big data, your existing data, and predictive analytics to make better decisions in an environment of rapid shifts in behavior and instant feedback.  Learn about the technologies that constitute a big data architecture, how to leverage and implement advanced analytics for real-time decisions, and the tools needed to know the unknown. Planning at the Speed of Business with Oracle Exalytics.  Learn how Oracle Hyperion Planning leverages the power of Oracle Exalytics to do planning faster, with more detail and more users than ever. For more details on these and other Business Analytics sessions at OpenWorld, download the Focus On Business Analytics program guide at:  http://www.oracle.com/openworld/focus-on/index.html We look forward to seeing you in San Francisco!

  Read the article

• Using all Ten IO slots on a 7420

  - by user12620172

  So I had the opportunity recently to actually use up all ten slots in a clustered 7420 system. This actually uses 20 slots, or 22 if you count the clusteron card. I thought it was interesting enough to share here. This is at one of my clients here in southern California. You can see the picture below. We have four SAS HBAs instead of the usual two. This is becuase we wanted to split up the back-end taffic for different workloads. We have a set of disk trays coming from two SAS cards for nothing but Exadata backups. Then, we have a different set of disk trays coming off of the other two SAS cards for non-Exadata workloads, such as regular user file storage. We have 2 Infiniband cards which allow us to do a full mesh directly into the back of the nearby, production Exadata, specifically for fast backups and restores over IB. You can see a 3rd IB card here, which is going to be connected to a non-production Exadata for slower backups and restores from it.The 10Gig card is for client connectivity, allowing other, non-Exadata Oracle databases to make use of the many snapshots and clones that can now be created using the RMAN copies from the original production database coming off the Exadata. This allows for a good number of test and development Oracle databases to use these clones without effecting performance of the Exadata at all.We also have a couple FC HBAs, both for NDMP backups to an Oracle/StorageTek tape library and also for FC clients to come in and use some storage on the 7420.  Now, if you are adding more cards to your 7420, be aware of which cards you can place in which slots. See the bottom graphic just below the photo.  Note that the slots are numbered 0-4 for the first 5 cards, then the "C" slots which is the dedicated Cluster card (called the Clustron), and then another 5 slots numbered 5-9. Some rules for the slots: Slots 1 & 8 are automatically populated with the two default SAS cards. The only other slots you can add SAS cards to are 2 & 7. Slots 0 and 9 can only hold FC cards. Nothing else. So if you have four SAS cards, you are now down to only four more slots for your 10Gig and IB cards. Be sure not to waste one of these slots on a FC card, which can go into 0 or 9, instead.  If at all possible, slots should be populated in this order: 9, 0, 7, 2, 6, 3, 5, 4

  Read the article

• WebLogic Partner Community Newsletter September 2012

  - by JuergenKress

  Dear WebLogic partner community member Happy Birthday to our WebLogic partner Community! We launched the community a year ago, it is growing fast with almost 1,000 members and with a significant impact in our business. The WebLogic partner revenue grew significant last fiscal year. I would like to thank you for your contribution. It is indeed a great opportunity for your WebLogic service revenue, like consulting, implementation or training. There will be thousands of opportunities at our joint customer base, like iAs to WebLogic migration, J2EE platform consolidation or private clouds. We will continue to highlight these opportunities in our newsletter and offer you campaign kits. Please feel free to let us know if you are interested. I would also recommend you to give us your feedback in our WebLogic Partner Community Survey 2012! Your feedback is very important for us. We continue to offer free WebLogic 12c Bootcamps across Europe. Please make sure you register asap for your local training! In addition to this we plan to offer Exalogic 2.01 Bootcamp. If you are interested to attend it then please add your details to our wiki. Our ExaLogic kit is updated with ExaLogic 2.01 ppt & training & Installation check-list & tips & Web tier roadmap. In case you want to learn more about ExaLogic, please visit Qualogy virtual demo center. We have not only released the latest version of Tuxedo 12c but Andrejus also made a Performance Audit Tool - Runtime Diagnosis for ADF Applications which is available now. We uploaded the latest WebLogic 12c and Glassfish ppt presentation for your customer meetings to the WebLogic Community Workspace (WebLogic Community membership required). Are you ready and prepared for Oracle Open World 2012? Make sure you read our tips and enjoy the conference! WebLogic Server 11gR1 Interactive Quick Reference is a wonderful online overview. Make sure you do not miss it! If you want to try WebLogic why not in the Oracle Cloud - Java Cloud Service. Our Java Guru Adam Bien published a new book Real World Java EE Patterns. If you use Java on your machine, Please make sure that you update your Java SE. Jürgen Kress Oracle WebLogic Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/WebLogicnewsSeptember2012 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• High-Powered Sites for low Cost

  - by HighAltitudeCoder

  Ahh, I am experiencing the intimidation of my very first post - visible by the whole world. Ok, here goes.   This first post is nothing exceptional.  It is simply a recommendation based (fittingly, I suppose) upon the job search you may be gearing up for.  I find myself in this very situation right now.  And, I will take my own recommendation after posting this entry. Job-Seekers: To the left you will notice two links under "Recommended Learning".  I have found these links to be invaluable when it comes to re-tooling, re-familiarizing, or otherwise resharping my skills when looking for that next job. Often, you will find job-postings with the text, usually posted after a laborious list of qualifications indicating the company's desire to hire candidates who know what they are doing: "...Looking for a candidate who can hit the ground running...".  The interesting thing about this post to me is I've encountered many individuals who, after speaking and working with them for some time, I've realized are perfectly capable of hitting the ground running - and FAST.  But what if they speed off in the wrong direction? The next time you spearhead a major task in your job, ask yourself: Am I headed in the wrong direction?  There are many ways to do this.  In fact, I've found in this new field there are more tempting ways to steer your project in the wrong direction than there are good ones.  I don't want to suggest that every one of my posts will fall into the "right direction" category, however I do think a healthy dose of introspection of the pros and cons will always be beneficial before you set off. That said, allow me to expound on the previously mentioned links. These web sites are invaluable.  They demonstrate the capabilities of existing as well as new and upcoming tools available in several IDE's.  I've viewed many tutorials in LearnVisualStudio.NET, and only one or two so far in TrainingSpot, however I've been delighted in their simplicity and straightforward approach to proper usage of the particular tool or concept being discussed.  They have not (so far in my experience) demonstrated ways in which to use the tools that become cumbersome, impractical, or error-prone. Each website has step-by-step videos that can be paused, replayed, and most importantly, they are done in real time.  As the author is typing, the viewer gets to experience the coding experience from a first-person perspective, including syntax errors, unexpected behaviors, IDE setup idiosyncracies, everything.  A subtle value I've gained from these videos is that a certain degree of confusion and introspection is normal when working with new tools and exploring new paths.  They (as well as your own experience) are not to be feared, but enjoyed.  I highly recommend them. Good work, guys!

  Read the article

• Weird Ubuntu Desktop Boot Partition On External Hard Drive

  - by Magnitus

  I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

  Read the article

• Finding "Stuff" In OUM

  - by Dave Burke

  One of the first questions people asked when they start using the Oracle Unified Method (OUM) is “how do I find X ?” Well of course no one is really looking for “X”!! but typically an OUM user might know the Task ID, or part of the Task Name, or maybe they just want to find out if there is any content within OUM that is related to a couple of keys words they have in their mind. Here are three quick tips I give people: 1. Open up one of the OUM Views, then click “Expand All”, and then use your Browser’s search function to locate a key Word. For example, Google Chrome or Internet Explorer: <CTRL> F, then type in a key Word, i.e. Architecture This is fast and easy option to use, but it only searches the current OUM page 2. Use the PDF view of OUM Open up one of the OUM Views, and then click the PDF View button located at the top of the View. Depending on your Browser’s settings, the PDF file will either open up in a new Window, or be saved to your local machine. In either case, once the PDF file is open, you can use the built in PDF search commands to search for key words across a large portion of the OUM Method Pack. This is great option for searching the entire Full Method View of OUM, including linked HTML pages, however the search will not included linked Documents, i.e. Word, Excel. 3. Use your operating systems file index to search for key words This is my favorite option, and one I use virtually every day. I happen to use Windows Search, but you could also use Google Desktop Search, of Finder on a MAC. All you need to do (on a Windows machine) is to make sure your local OUM folder structure is included in the Windows Index. Go to Control Panel, select Indexing Options, and ensure your OUM folder is included in the Index, i.e. C:/METHOD/OM40/OUM_5.6 Once your OUM folders are indexed, just open up Windows Search (or Google Desktop Search) and type in your key worlds, i.e. Unit Testing The reason I use this option the most is because the Search will take place across the entire content of the Indexed folders, included linked files. Happy searching!

  Read the article

• New laptop, Windows 8.1, attempting dual install. Ubuntu installer doesn't 'see' existing OS

  - by Flaminica

  Though I've used Ubuntu for a few years, I'm new to installation. Previously I had help and now I'm doing it alone (moved across the world). Windows 8.1 came preinstalled on my new laptop (Toshiba Satellite C70-A-17C - Core i5, 8 GB RAM, 750 GB HDD). I have already followed a few steps I found online to prepare for a dual install (with Ubuntu 14.04). I backed up Windows, created a bootable Ubuntu USB and DVD (just in case one didn't work), turned off fast boot and secure boot, and shrunk C:/. The new unallocated drive portion is 292.97 GB. After shrinking C:/, I restarted Windows a couple of times to make sure everything was working fine (it is). I then attempted to install with the Ubuntu live USB. However, the Ubuntu installer doesn't see that Windows 8.1 is already installed. I don't understand, and don't want to mess with Ubuntu partitioning when I don't know where the partitions will be created. My concern is that, if I go further with the installation process, Windows might be overwritten or compromised in some way. I then tried to reboot using the Ubuntu live DVD, thinking I might get a different result. However, I can't figure out how to make the laptop boot from the CD drive. I went into the BIOS and found no option there, either. Any help is very appreciated! EDIT: Looks like I can't link directly to each photo. Here is my album of screenshots: http://imgur.com/a/zChCo Here you can see that there's no option to boot from CD drive, only USB. Everything looks okay so far. I don't understand this. Ubuntu has not yet been installed. Unmounting partitions? (I chose 'no'.) Even though the laptop came pre-installed with Windows 8.1, the Ubuntu USB installer can't see it. I chose 'something else'. I need to pick and format partitions. I scrolled down and took a second shot to include all information. Completely lost and cancelled installation.

  Read the article

• Wifi problems with Ubuntu 13.10

  - by Sparrowhawk4

  I should probably say straight off that I am brand new to Ubuntu. I installed 13.10 alongside Windows 7 a couple of days ago and I've managed to clear up all the little problems, apart from with the wifi. My internet is fine using an ethernet cable. I can connect to the wifi, and it tells me that the signal is good, but for the vast majority of the time I can't load anything, and system monitor tells me that I am sending and receiving nothing. The problem is somewhere in Ubuntu. It works fine on Windows 7, my Android phone and all of my flatmates laptops. I know I'm not the only one with this problem, but the fixes I've seen either don't work or I don't understand them enough to carry them out. Help? EDIT: from lspci command as requested 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

  Read the article

• Introduction to Agile Development

  - by Grant Fritchey

  Even though my current job is a little weird, I still consider myself to be a DBA. I didn’t start that way in IT. I came through support and into development. I loved development. There was a constant struggle to attempt to improve your code, your understanding, and, most importantly, the process of development itself. Development can be slow and tedious. Left alone, developers can simply disappear to build a project and not come back for two years, at which time they deliver it. But, maybe that software isn’t what you wanted, or it’s no longer needed, or who knows what. So developers are constantly attempting to improve their processes in order to deliver more relavent software quicker (something DBAs could learn about). I really admire it. One of the many processes that has come out of that constant striving is known as Agile. As the name implies, Agile development attempts to come up with a quick, fast turning, business aware, well, for want of a word, agile, process that is more responsive to the needs of the business. There are tons and tons of books and blogs and videos on the subject that can get you going. But, Agile isn’t easy (note, Easy is not part of the name). Agile processes can be hard. I’ve worked on multiple agile teams, some successful, some not. The two principal differences between the teams were their discipline and their knowledge of the process. Discipline, that comes from within. But knowledge, ah, well there I can help. Red Gate is bringing a series of free instructional events to the United States in a few weeks time focused primarily on SQL Server (click here right now to register while there’s still space). We’re also offering some .NET instruction too. That’s a full day, free, with top experts in the business. But, the next day, there’s a full day session introducing Agile. You can go to this and learn how to do Agile. Develop that knowledge that will enable you to successfully use the Agile process. Go to this web site to check it out. No, this event is not free, but not everything can be. And it’s not just for developers. DBAs, you need to learn this stuff too. Management could also benefit from understanding these processes (because you guys can help to enforce discipline). It’s really for everyone involved in the development process.

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >