Search Results

Search found 14745 results on 590 pages for 'language switching'.

Page 274/590 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Dock with dual external DVI monitors with Intel + Nvidia Optimus?

  - by Ryan

  I have a Dell Latitude E6420 laptop plugged into a docking station, and the dock has 2 monitors (connected with DVI). Also note that I've installed Ubuntu alongside (dual-boot) Windows 7. I can't get the dual monitors to work both on Ubuntu (either 11.10 or 12.04) and Windows 7. When I run lspci | grep VGA, I get: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF108 [Quadro NVS 4200M] (rev a1) If I then reboot and uncheck Optimus setting in the BIOS during reboot, I'm able to get the dual monitors to work in Ubuntu 12.04 (but I need to configure them every boot in Nvidia Settings). When I run lspci | grep VGA, I get: 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) But then if I reboot into Windows (leaving the Optimus unchecked), Windows can't detect external monitors, and the resolution is unacceptably low. I've seen on many forum posts that this particular graphics card setup causes lots of headaches. I haven't been able to resolve my problem yet. How can I use my external display on my laptop with intel and nvidia video cards? How to use external displays with Intel driver on a NVidia/Intel hybrid system nVidia Optimus , Unity 3D and Dual Monitors "Just use VGA instead of DVI" isn't an option because my dock has only 1 VGA port (and 2 DVI). Switching the BIOS setting on every reboot and then reconfiguring the display settings every time is tedious, time-consuming, and impractical. Do you know how to make this work smoothly? Thanks for your help! P.S. see also: http://superuser.com/questions/434358/dell-latitude-e6420-dual-boot-ubuntu-windows-7-optimus-graphics-problems

  Read the article

• 12.10 visual performance using nvidia driver

  - by user100485

  My fresh ubuntu 12.10 install is slow, not something extreme but dragging windows, switching workspaces and things like that are just slow and look horrible. it feels like the fps is dropping in a game. Doing some photoshop work in windows was even a relief! This effect gets worse if I connect my external monitor. My system is an intel pentium dual core T4500 with 4gb memory and a GeForce 8200M G/integrated/SSE2 graphics chip. Nothing fancy but should be able to run ok. My "experience" in ubuntu is set to standard. (MSI cr500 laptop) I've installed the nvidia drivers, tried current and experimental and the experimental drivers seem to perform a bit better but overall bad anyway. I set the mode to adaptive in the nvidia-settings tool and it goes to maximum setting directly and doesn't come back. Using htop I found out that compiz or the X server always use a few percent of my cpu, more than I think it should and the time consumed is 5:18 for compiz, 4:33 for /usr/bin/X and 2:41 for google chrome(about 30 tabs open so not too strange I think.) What can I do to increase the visual performance cause this makes me not want to use ubuntu in public!

  Read the article

• Come integrare in modo smart processi di vendita e produzione?

  - by Claudia Caramelli-Oracle

  L’innovazione tecnologica ha trasformato il modo in cui i clienti interagiscono con le aziende. Inoltre, gli attuali scenari di mercato richiedono attenzione ed efficacia nella vendita per mantenere massima competitività. Per ottenere le migliori performance di vendita è necessario accelerare e automatizzare i processi di scambio informazioni tra i dipartimenti commerciali e produttivi, minimizzando tempi di attesa per ottenere dati tecnici e autorizzazioni alla fattibilità, riducendo i colli di bottiglia e i possibili errori umani attraverso un processo di controllo e omologazione dell’offerta.Gli sponsor dell’evento ti attendono l'11 giugno presso la prestigiosa sede dell’Unione Industriale di Torino per scoprire come: Ridurre il ciclo di vendita, facendo efficienza sull’intero processo di vendita Minimizzare gli impatti da turnover del personale di vendita Migliorare il value to promise Ottenere una migliore fidelizzazione e soddisfazione dei propri clienti, riducendone lo switching Assistere dal vivo ad una dimostrazione pratica di Oracle, leader mondiale nell’ambito delle soluzioni di CPQ (Configure, Price and Quoting) nell’utilizzo di uno strumento veloce, facile da utilizzare, che permetta una gestione smart della configurazione commerciale dell’offerta B2B anche con l’ausilio di accesso mobile e cruscotti direzionali. Scoprire come altre aziende abbiano adottato con successo queste soluzioni di business. La partecipazione all'evento è gratuita ma con capienza limitata, iscriviti subito per assicurarti la partecipazione: CLICCA QUI per registrarti. Se hai bisogno di maggiori informazioni scrivi a Silvia Valgoi.

  Read the article

• Blank screen after Switch User or Resume

  - by matt wilkie

  About half the time when I switch users or resume from standby or resume the screen goes blank (black). If I work the cursor keys I can hear the system bell when it gets to the end of the user list. I can also successfully login, going from memory, but screen stays black. Sometimes closing and re-opening the lid will light up the screen again. Pressing the special Function key to enable/disable external monitor connection has no effect [Fn]-[F5],[Fn]-[F6]. If none of the previous work I need to put the computer into hibernation or full power off to restore screen function. If I watch closely when switching users I think I can see the screen initially start to light up and then quickly fade to black. The computer is an Acer Aspire 3500, model ZL6, running Ubuntu 10.10 installed 2 days ago. No proprietary drivers are in use. I'll provide a list of hardware details as soon as I can figure out how to generate that (didn't there used to be an entry for hardware details under the System menu?). Possibly related questions: No resume after Hibernate or Standby When I resume from suspension - the screen is blank Switch user fails to complete successfully For what it's worth, blank after resume also used to happen occasionally when the laptop was running XP-Home, but nowhere near as often, perhaps 6 or 8 times a year. UPDATE: I found System Administration System Testing and ran the Monitor test. It went very very dark, but the window elements could be discerned, and the whole screen flashed (from very very dark to black). On the third repeat of that same test the screen went to full blaupck and stayed there. Moving the mouse, via touchpad, or touch keys did not wake it up again. I had to close the lid and put the computer into hibernate, and press the power button to restore it. UPDATE2: output of lshw: http://pastebin.com/q7n8676r, lspci: http://pastebin.com/6ujzVK4r UPDATE3: sometimes I can restore the screen by flipping to console 1 with ctrl-alt-F1 and then back to graphical with ctrl-alt-F7.

  Read the article

• Linux to Solaris @ Morgan Stanley

  - by mgerdts

  I came across this blog entry and the accompanying presentation by Robert Milkoski about his experience switching from Linux to Oracle Solaris 11 for a distributed OpenAFS file serving environment at Morgan Stanley. If you are an IT manager, the presentation will show you: Running Solaris with a support contract can cost less than running Linux (even without a support contract) because of technical advantages of Solaris. IT departments can benefit from hiring computer scientists into Systems Programmer or similar roles.  Their computer science background should be nurtured so that they can continue to deliver value (savings and opportunity) to the business as technology advances. If you are a sysadmin, developer, or somewhere in between, the presentation will show you: A presentation that explains your technical analysis can be very influential. Learning and using the non-default options of an OS can make all the difference as to whether one OS is better suited than another.  For example, see the graphs on slides 3 - 5.  The ZFS default is to not use compression. When trying to convince those that hold the purse strings that your technical direction should be taken, the financial impact can be the part that closes the deal.  See slides 6, 9, and 10.  Sometimes reducing rack space requirements can be the biggest impact because it may stave off or completely eliminate the need for facilities growth. DTrace can be used to shine light on performance problems that may be suspected but not diagnosed.  It is quite likely that these problems have existed in OpenAFS for a decade or more.  DTrace made diagnosis possible. DTrace can be used to create performance analysis tools without modifying the source of software that is under analysis.  See slides 29 - 32. Microstate accounting, visible in the prstat output on slide 37 can be used to quickly draw focus to problem areas that affect CPU saturation.  Note that prstat without -m gives a time-decayed moving average that is not nearly as useful. Instruction level probes (slides 33 - 34) are a super-easy way to identify which part of a function is hot.

  Read the article

• When does a Project Manager start in a project?

  - by johndoucette

  From a colleague of mine… “As a project manager, when do you typically like to get initially involved in the project? Is it better for the PM to be rolled on during the project kick-off, the first week, or is it better to roll-on the second week when things settle down?” My textbook answer is “the Project Manager is responsible for the successful completion and delivery of the expected outcome of the project through the following major tasks;” 1.    Identifying requirements 2.    Establishing clear and achievable objectives 3.    Balancing the competing demands for quality, scope, time, and cost 4.    Adapting the specifications, plans, and approach to the different concerns and expectations of the various stakeholders However; My colleague is often a lead technical consultant coming into a project alone to help a client solve a complex problem. As Magenic consultants, we all possess many of the “project managing” skills I talked about above and tend to be responsible for item #1 and #2 as well as the actual architecture/design tasks early in a project. When the real development begins and there is no PM involved, the project will quickly get harder to execute unless items #3 & #4 are assigned to a Project Manager. In software development, the concept of context switching between coding and other administrative activities is the hardest skill perfect. In my experience, I have rarely been introduced to someone who has mastered this skill. This is the limbo I was in when I was asked to become a PM -- while still developing. “Put down the code” was not only a profound statement, but looking back – a necessary one. Unless you are lucky to have found that one developer who is a superman, asking your developers (internal corporate or consultant) to perform #3 and #4 tasks, will surely take more time, allow opportunity for more scope, and eventually cost more. Project Managers are crucial to the overall success of a project, and I prefer them to start by taking ownership of delivery on day one.

  Read the article

• Mailbox move issue from Exchange 2003 to Exchange 2010

  - by Ryan Roussel

  Today while moving mailboxes between Exchange 2003 and Exchange 2010, I hit an issue with a couple of mailboxes.  These mailboxes all popped access denied errors or more exactly: Insufficient Access Rights to perform the operation.   The cause was similar to the mail flow issue in that inheritable permissions were not turned on for the user object in Active Directory.  This also presented it’s own unique problem in that since the initial move request failed because of permissions, it had to be cleared before a new move request could be created. On top of that, the request did not show up in the EMC.  I used the following process to clear the request, assign permission, then create a new request:   1. First you need to know the ExchangeGUID of the mailbox for the remove-moverequest command.  To quickly get the GUID for a mailbox simply run:         2. Next we need to clear out the move request using PowerShell by running: [PS] c:\>Remove-moverequest -moverequestqueue "mailbox database 1030639620" -mailboxguid 8525686f-d4d3-42b7-92f1-46d77ea841a3   3. Then to re-establish inheritable permissions. This can be done by using AD Users and Computers, switching to View Advanced Features, then under the Security tab of the object.  Click Advanced, then check “allow inheritable permissions of parent to propagate to this object”   4. Once the Inheritable permissions are restored, we need to create a new move request: NOTE:  The EMC can also be used to initiate the Move Request once the permissions are corrected. [PS] c:\>New-moverequest –identity jyoung  -baditemlimit 100 -targetdatabase "mailbox database 1030639620"   And that’s it.  The mailbox should move over smoothly with no access denied error.

  Read the article

• Hybrid Graphics on Windows 7/Ubuntu 12.04 Dual Boot

  - by Noob.

  Alright, so here's the situation: I am using an ASUS UL80VT with two graphics cards: Integrated intel graphics and NVIDIA G210M I was running an Ubuntu 12.04 - Windows 7 dual boot (on separate partitions).The machine worked perfectly (including the display drivers) without me needing to install anything special or change any settings. However, my hard drive was corrupted and I lost all my data yesterday, so after it was replaced, I installed Ubuntu 12.04 64x again after installing Windows 7. I booted up Ubuntu after installation, and noticed it was by default using Unity 2D... Gnome 3.4 wasn't working properly either, so I guessed that the NVIDIA G210M driver wasn't installed/working and the OS was instead using the integrated graphics. I checked the "Additional Drivers" thing, but there were no proprietary drivers listed there, so I went to the NVIDIA website, downloaded the driver directly and installed it. I restarted, but there was no change. After this, I read somewhere that I should change my SATA in the BIOS to "Compatible" rather than "Enhanced". This worked fine and fixed the problem (both Unity and Gnome were working perfectly) but then when I tried booting up Windows 7, I recieved the BSOD. So I changed it back to Enhanced, and once again, the NVIDIA 210M graphics isn't working on Ubuntu, but on Windows 7 it is. I do not want to keep changing from Enhanced to Compatible every time I reboot to Ubuntu and neither do I want to simply just use one OS. Note that NVIDIA 210M and integrated graphics work perfectly on Windows 7. Also, I don't care about switching between them, I just want to be able to use the NVIDIA one. What can I do so that both Windows 7 and Ubuntu work and NVIDIA G210M works on Ubuntu?

  Read the article

• Disable alt + tab moving windows by itself

  - by Lie Ryan

  Whenever I press Alt + Tab , Unity moves the window I'm switching to so that the whole window is inside the screen. This behavior is excruciatingly annoying because I often move a window (usually text editors) partially outside the current screen so I can view another window below it (usually a browser). Every time I Alt + Tab back to the text editor, I'm getting an unnecessary virtual screen switch, and Unity is rearranging the windows behind my back. For instance, here is a browser and text editor on Virtual Screen 1 (top left), note that the text editor is partially outside the current screen: Then I Alt-Tab to the browser (or clicked on it): Next, I Alt + Tab again to get back to the text editor, but Alt-Tab switched me to Virtual Screen 4 (bottom right) because a larger percentage of the text editor window is on virtual screen 4 than in virtual screen 1; and the browser is no longer in the screen. Also note that the text editor window moves from being on the bottom-right to the top-left, which is very disorienting as I can no longer keep track of where any of my windows are since they all keep moving around by themselves.. How do I disable this behavior? I don't want to have any virtual screen switch when Alt + Tab , especially since Alt + Tab does not list windows that is completely not in the current virtual screen anyway.

  Read the article

• Real world pitfalls of introducing F# into a large codebase and engineering team

  - by nganju

  I'm CTO of a software firm with a large existing codebase (all C#) and a sizable engineering team. I can see how certain parts of the code would be far easier to write in F#, resulting in faster development time, fewer bugs, easier parallel implementations, etc., basically overall productivity gains for my team. However, I can also see several productivity pitfalls of introducing F#, namely: 1) Everyone has to learn F#, and it's not as trivial as switching from, say, Java to C#. Team members that have not learned F# will be unable to work on F# parts of the codebase. 2) The pool of hireable F# programmers, as of now (Dec 2010) is non-existent. Search various software engineer resume databases for "F#", way less than 1% of resumes contain the keyword. 3) Community support as of now (Dec 2010) is less available. You can google almost any problem in C# and find someone that has already dealt with it, not so with F#. Third party tool support (NUnit, Resharper etc) is also sketchy. I realize that this is a bit Catch-22, i.e. if people like me don't use F# then the community and tools will never materialize, etc. But, I've got a company to run, and I can be cutting edge but not bleeding edge. Any other pitfalls I'm not considering? Or anyone care to rebut the pitfalls I've mentioned? I think this is an important discussion and would love to hear your counter-arguments in this public forum that may do a lot to increase F# adoption by industry. Thanks.

  Read the article

• excel vba to CRUD drupal nodes

  - by Kirk Hings

  We need to periodically migrate Excel reports data into Drupal nodes. We looked at replicating some Excel functionality in Drupal with slickgrid, but it wasn't up to snuff. The Excel reports people don't want to double-enter their data, but their data is important to be in this Drupal site. They have hundreds of Excel reports, and update a row in each weekly. We want a button at the row end to fire a VBA macro that submits the data to Drupal, where a new node is created from the info submitted. (Yes, we are experienced with both Drupal and VBA; all users and the site are behind our firewall.) We need the new node's nid or URL returned so we can then create a link in Excel directly to that node Site is D6, using Services 3.x module. I tried the REST server module, but we can't get it to retrieve data without session authentication on, which we can't do from Excel. (unless you can?) I also noticed the 'data' it was returning via browser url was 14 or 20 nodes' info, not the one nid requested (Example: http://mysite.com/services/rest/report/node/30161) When I attempt to create a simple node like this from VBA: Dim MyURL as String MyURL = "http://mysite.com/services/rest/report/node?node[type]=test&node[title]=testing123&node[field_test_one][0][value]=123" Set objHTTP = CreateObject("MSXML2.ServerXMLHTTP") With objHTTP .Open "POST", MyURL, False .setRequestHeader "Content-Type", "application/x-www-form-urlencoded" .send (MyURL) End With I get HTTP Status: Unauthorized: Access denied for user 0 "anonymous" and HTTP Response: null Everything I search for has examples in php or java, nothing in VBA. Also tried switching to using an XMLRPC server but that's even more confusing. We would like json (used application/json, set formatter accordingly in REST server settings), but will use anything that works. Ideas? Thanks in advance!

  Read the article

• 12.04 kernel panic

  - by jesus

  Hello I'm having trouble with Ubuntu 12.04. I downloaded the ISO and burned it into a CD and tried to install Ubuntu, but during the installation process, I got this message Kernel panic-not syncing Attempted to kill init! pid:1,comm:init not tainted 3.2.0-23-generic-pae#36-ubunru then it says switching to console text, and it just hangs in there and nothing happens. I burned another CD with Ubuntu 10.04, but I get a different problem: Ubuntu just gets stuck at the splash screen with the 5 dots which move from red to white, and nothing happens. I was able to boot before with 10.04 but I recently upgraded my computer graphics card and power supply. please see my system specs. Gigabyte GA-M68M-S2P (rev. 2.3) GeForce 7025 Chipset Athalon II x4 640 QuadCore Radeon HD 6870 sapphire OCZ ModXStream Pro 600W Modular High Performance Power Supply 3 hard drives one is IDE and the other two SATA IDE DVD Drive If any one could help me, I'd be most appreciative. If it helps I tried the F6 option like acpi=off noapic nolapic nomodset but i still get kernel panic

  Read the article

• What are the possible options for AI path-finding etc when the world is "partitionned"?

  - by Sebastien Diot

  If you anticipate a large persistent game world, and you don't want to end up with some game server crashing due to overload, then you have to design from the ground up a game world that is partitioned in chunks. This is in particular true if you want to run your game servers in the cloud, where each individual VM is relatively week, and memory and CPU are at a premium. I think the biggest challenge here is that the player receives all the parts around the location of the avatar, but mobs/monsters are normally located in the server itself, and can only directly access the data about the part of the world that the server own. So how can we make the AI behave realistically in that context? It can send queries to the other servers that own the neighboring parts, but that sounds rather network intensive and latency prone. It would probably be more performant for each mob AI to be spread over the neighboring parts, and proactively send the relevant info to the part that contains the actual mob atm. That would also reduce the stress in a mob crossing a border between two parts, and therefore "switching server". Have you heard of any AI design that solves those issues? Some kind of distributed AI brain? Maybe some kind of "agent" community working together through message passing?

  Read the article

• Migrating Forms to Java or ADF, the truth and no FUD

  - by Grant Ronald

  The question about migrating Forms to Java (or ADF or APEX) comes up time and time again.  I wanted to pull some core information together in a single blog post to address this question. The first question I always ask is "WHY" - Forms may still be a viable option for you so "if it ain't broke don't fix it".  Bottom line is whatever anyone tells you, its going to be a considerable effort and cost to migrate from Forms to something else so the business is going to want to know WHY you spend all those hard earned dollars switching from something that might have been serving you quite adequately. Second point, if you are going to switch, I would encourage you NOT to look at building a Forms clone.  So many times I see people trying to build an ADF application and EXACTLY mimic the Forms model - ADF is NOT a Forms clone.  You should be building to the sweet spot of your target technology, not your 20 year old client/server technology.  This is also the chance for the business to embrace change, so maybe look at new processes, channels and technology options that weren't available when you first developed your Forms applications. To help you understand what is involved, I've put together a number of resources. Thinking about migration of Forms to Java, ADF or APEX, read this to prepare yourself Oracle Forms to ADF: When, Why and How - this gives you an overview of our vision, directly from Oracle Product Management Redeveloping a Forms Application with Oracle JDeveloper and Oracle ADF.  This is a conference session from myself and Lynn Munsinger on how ADF can be used in a Forms migration/rewrite As someone who manages both Forms and ADF Product Management teams, I've a foot in either camp and am happy to see you use either tool.  However, I want you to be able to make an informed decision.  My hope is that there information sources will help you do that.

  Read the article

• SQL SERVER – Get Schema Name from Object ID using OBJECT_SCHEMA_NAME

  - by pinaldave

  Sometime a simple solution have even simpler solutions but we often do not practice it as we do not see value in it or find it useful. Well, today’s blog post is also about something which I have seen not practiced much in codes. We are so much comfortable with alternative usage that we do not feel like switching how we query the data. I was going over forums and I noticed that at one place user has used following code to get Schema Name from ObjectID. USE AdventureWorks2012 GO SELECT s.name AS SchemaName, t.name AS TableName, s.schema_id, t.OBJECT_ID FROM sys.Tables t INNER JOIN sys.schemas s ON s.schema_id = t.schema_id WHERE t.name = OBJECT_NAME(46623209) GO Before I continue let me say I do not see anything wrong with this script. It is just fine and one of the way to get SchemaName from Object ID. However, I have been using function OBJECT_SCHEMA_NAME to get the schema name. If I have to write the same code from the beginning I would have written the same code as following. SELECT OBJECT_SCHEMA_NAME(46623209) AS SchemaName, t.name AS TableName, t.schema_id, t.OBJECT_ID FROM sys.tables t WHERE t.name = OBJECT_NAME(46623209) GO Now, both of the above code give you exact same result. If you remove the WHERE condition it will give you information of all the tables of the database. Now the question is which one is better – honestly – it is not about one is better than other. Use the one which you prefer to use. I prefer to use second one as it requires less typing. Let me ask you the same question to you – which method to get schema name do yo use? and Why? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL System Table, SQL Tips and Tricks, T SQL, Technology

  Read the article

• ASP.NET Session Management

  - by geekrutherford

  Great article (a little old but still relevant) about the inner workings of session management in ASP.NET: Underpinnings of the Session State Management Implementation in ASP.NET.   Using StateServer and the BinaryFormatter serialization occuring caused me quite the headache over the last few days. Curiously, it appears the w3wp.exe process actually consumes more memory when utilizing StateServer and storing somewhat large and complex data types in session.   Users began experiencing Out Of Memory exceptions in the production environment. Looking at the stack trace it related to serialization using the BinaryFormatter. Using remote debugging against our QA server I noted that the code in the application functioned without issue. The exception occured outside the context of the application itself when the request had completed and the web server was trying to serialize session state into the StateServer.   The short term solution is switching back to the InProc method. Thus far this has proven to consume considerably less memory and has caused no issues. Long term the complex object stored in session will be off-loaded into a web service used to access the information directly from the database outside the context of the object used to encapsulate it.

  Read the article

• Monitor not detected after booting without monitor attached (12.04)

  - by cawkie

  I had a stable 12.04 machine running perfectly. The machine was booted without the monitor connected - since then the system always boots to low graphics mode. Onboard graphics (from lspci): VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Monitor: AOC e2450Swh Display widget shows monitor as laptop(!?) and system details shows graphics as Gallium 0.4 on llvmpipe (LLVM 0x300) X-server log appears to show correct monitor detected. When I boot from a live CD I get full 3d graphics I've tried the monitor on a different machine - all OK. I've tried a different monitor on this machine - same problem. Between having a working system and a broken one there have been no updates and I have made no configuration changes... EDIT: I have come to the conclusion that the problem is caused by a known issue with lightDM hanging on battery check. I've managed to get 3D graphic working by switching to using GDM - not a solution but acceptable workaround. I would still like to know what is causing the problem and how I managed to get my system into this state!

  Read the article

• Ubuntu 11.10 power management does not recognize removal of power supply!

  - by sema

  I have a Lenovo Ideapad Z370 with Ubuntu 11.10 and the battery status indicator shows wrong information. Problem: The indicator always shows that the power supply is connected, even if it's not connected. The battery charges and discharges normally. However, the status information is wrong. When charging, the "time to charge" decreases, and when discharging the "time to charge" increases. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My trials: I tried reinstalling the indicator applet, but that doesn't help. Searching for solutions or similar problems didn't point out any help. Background: The problem occured after I switched the battery mode in Windows. (I use a dual boot system.) Lenovo drivers allow a "battery runtime mode" for maximum runtime and a "battery health mode" for maximum battery lifetime. I initially used the runtime mode, tried the health mode for some time, but switched back to the runtime mode. The problem occured after switching to health mode. Does anyone have an idea what is wrong? The problem is relevant for me as I get no information when battery status low and the computer runs out of energy without shutdown or hibernation. This is really a problem for me!

  Read the article

• Unity does not load when selecting Xorg open source radeon driver

  - by Teddy Thorpe

  When I select the X.org Radeon open source driver, Unity does not load. However, when I select the Proprietary AMD Driver from the official Ubuntu repository, Unity does load. Why is Unity doing this? I had no problems with switching between these drivers in Ubuntu 12.04 LTS. This started happening when I upgraded to Ubuntu 12.10. Before I ever installed the propriatery AMD driver, the X.org driver loaded Unity fine, but very sluggishly. I downloaded the AMD driver from their official website and installed that first and that is what started this problem. I removed that driver and went back to X.org and X.org didn't load Unity either. Then using Synaptic, I installed the AMD driver from the Ubuntu repositories and thats what I'm using now. I'm very confused why that downloaded AMD driver would effect X.org. I have a AMD Radeon HD 6620G. It's integrated graphics on my AMD A8-3500M APU (Accelerated Processing Unit as AMD advertises it).

  Read the article

• Shared to Dedicated or Amazon CloudFront to improve performances and keep secured?

  - by user978548

  I have a Wordpress which currently takes about 1.8s to 2.5s for the home page to completely load in my country. The page weight is about 700Ko (static content included). In order to increase performances, I'm considering two solutions: Switching to a dedicated host. Using amazon s3 cloudfront to serve static contents. My current shared hosting have servers in a neighboring country but not exactly in mine, and both amazon and the dedicated hosting have some, so that's already an advantage. So considering all that, I still have three questions remaining: Currently having a low traffic (100 unique visitors/days, but growing) will it make a huge difference between my shared hosting and a dedicated server ? Knowing that I already use a cookie-less domain to deliver static contents (but using a redirection to the same server), would using amazon s3 make a real difference ? Talking about the cons of dedicated vs amazon s3, if I choose for the dedicated server something like Ubuntu server and do daily package updates and have only port 80 open, would it be sufficient in terms of security (in comparison with my current shared hosting which manage everything for me) ?

  Read the article

• WizMouse Enables Mouse Over Scrolling on Any Window

  - by ETC

  WizMouse is a free and lightweight Windows application that enables a simple but effective trick: the ability to scroll the contents of a window that is under your mouse cursor without shifting the focus to that window. It may not seem like much, at first glance, but the ability to scroll a window without having to click on it and shift the focus of your current window is a huge time saver. Once WizMouse is installed simply mousing over any open window and engage your scroll wheel for instant scroll with no additional click or shift in focus necessary. You’ll get so used to it you’ll forget that it wasn’t built into Windows from the start. Hit up the link below to grab a copy of WizMouse, a free and Windows only application. WizMouse [Antibody Software] Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) WizMouse Enables Mouse Over Scrolling on Any Window Enhance GIMP’s Image Editing Power with Gimp Paint Studio Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox Wind and Water: Puzzle Battles – An Awesome Game for Linux and Windows How Star Wars Changed the World [Infographic] Tabs Visual Manager Adds Thumbnailed Tab Switching to Chrome

  Read the article

• Installing nvidia drivers causes computer to boot to command prompt.

  - by levesque

  Hi, I have an Asus u30jc laptop, which comes with the Optimus prime graphics card switching technology that is now supported under 2.6.35, so I decided to give it a try. First I made sure the discrete graphics card was activated and then I installed the drivers proposed by the ubuntu software repository (nvidia-current). However, after rebooting all I got was a command prompt. My graphics card is a nvidia 310M. This is on Ubuntu 10.10 64 bits. What can I do to diagnose/identify the source of this problem? UPDATE: The messsages in my syslog tell me to check the xorg log: Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmDisplay: display lasted 0.053144 seconds Oct 11 12:42:59 u30jc-test gdm-simple-slave[1450]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmDisplay: display lasted 0.038176 seconds Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors Which I did. I found this message in my /var/log/Xorg.0.log : Fatal server error: [ 113.540] no screens found [ 113.540] What does that mean?

  Read the article

• JDK bug migration: bugs.sun.com now backed by JIRA

  - by darcy

  The JDK bug migration from a Sun legacy system to JIRA has reached another planned milestone: the data displayed on bugs.sun.com is now backed by JIRA rather than by the legacy system. Besides maintaining the URLs to old bugs, bugs filed since the migration to JIRA are now visible too. The basic information presented about a bug is the same as before, but reformatted and using JIRA terminology: Instead of a "category", a bug now has a "component / subcomponent" classification. As outlined previously, part of the migration effort was reclassifying bugs according to a new classification scheme; I'll write more about the new scheme in a subsequent blog post. Instead of a list of JDK versions a bug is "reported against," there is a list of "affected versions." The names of the JDK versions have largely been regularized; code names like "tiger" and "mantis" have been replaced by the release numbers like "5.0" and "1.4.2". Instead of "release fixed," there are now "Fixed Versions." The legacy system had many fields that could hold a sequence of text entries, including "Description," "Workaround", and "Evaluation." JIRA instead only has two analogous fields labeled as "Description" and a unified stream of "Comments." Nearly coincident with switching to JIRA, we also enabled an agent which automatically updates a JIRA issue in response to pushes into JDK-related Hg repositories. These comments include the changeset URL, the user making the push, and a time stamp. These comments are first added when a fix is pushed to a team integration repository and then added again when the fix is pushed into the master repository for a release. We're still in early days of production usage of JIRA for JDK bug tracking, but the transition to production went smoothly and over 1,000 new issues have already been filed. Many other facets of the migration are still in the works, including hosting new incidents filed at bugs.sun.com in a tailored incidents project in JIRA.

  Read the article

• What is the difference between Callback<T> and Java 8's Supplier<T>?

  - by Dan Pantry

  I've been switching over to Java from C# after some recommendations from some over at CodeReview. So, when I was looking into LWJGL, one thing I remembered was that every call to Display must be executed on the same thread that the Display.create() method was invoked on. Remembering this, I whipped up a class that looks a bit like this. public class LwjglDisplayWindow implements DisplayWindow { private final static int TargetFramesPerSecond = 60; private final Scheduler _scheduler; public LwjglDisplayWindow(Scheduler displayScheduler, DisplayMode displayMode) throws LWJGLException { _scheduler = displayScheduler; Display.setDisplayMode(displayMode); Display.create(); } public void dispose() { Display.destroy(); } @Override public int getTargetFramesPerSecond() { return TargetFramesPerSecond; } @Override public Future<Boolean> isClosed() { return _scheduler.schedule(() -> Display.isCloseRequested()); } } While writing this class you'll notice that I created a method called isClosed() that returns a Future<Boolean>. This dispatches a function to my Scheduler interface (which is nothing more than a wrapper around an ScheduledExecutorService. While writing the schedule method on the Scheduler I noticed that I could either use a Supplier<T> argument or a Callable<T> argument to represent the function that is passed in. ScheduledExecutorService didn't contain an override for Supplier<T> but I noticed that the lambda expression () -> Display.isCloseRequested() is actually type compatible with both Callable<bool> and Supplier<bool>. My question is, is there a difference between those two, semantically or otherwise - and if so, what is it, so I can adhere to it?

  Read the article

• What partition to use to keep data files in Ubuntu?

  - by Martin Lee

  I have been using Ubuntu for a few years and usually my partition set up was the following: Ext3 or Ext4 partition for the system itself (20 GB); A 10 GB swap partition; a big FAT32 partition to store movies, photos, work stuff, etc. (depends on the capacity of the disk, but usually it is what is left from Ext3+Swap, currently it is more than 200 GB). Does this setup sound right? I am considering to switching to one big Ext3 partition now, because the problem with Fat32 in Ubuntu has not gone anywhere: for example, right now I can access my 'big' partition with a 'Data' label only through /media/_themes?END. Pretty strange name for a partition, isn't it? some Linux software fail to read/write on this partition. For example, if I want to play around with rebar and build/make/compile things on this FAT32 partition, it will always complain about permissions and won't work (the same goes for many other kinds of software); it is not stable, I can not refer to some files on this FAT32 partition, because after the next reboot it will be called not '_themes?END', but something else. On the other side I usually begin to run out of space on the Ext3 partition after a few months of usage. So, the question is - what is the best setup of partitions for an Ubuntu system? Should a FAT32 partition be used at all?

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >