Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 274/279 | < Previous Page | 270 271 272 273 274 275 276 277 278 279  | Next Page >

  • 8 Mac System Features You Can Access in Recovery Mode

    - by Chris Hoffman
    A Mac’s Recovery Mode is for more than just reinstalling Mac OS X. You’ll find many other useful troubleshooting utilities here — you can use these even if your Mac can’t boot normally. To access Recovery Mode, restart your Mac and press and hold the Command + R keys during the boot-up process. This is one of several hidden startup options on a Mac. Reinstall Mac OS X Most people know Recovery Mode as the place you go to reinstall OS X on your Mac. Recovery Mode will download the OS X installer files from teh Intenret if you don’t have them locally, so they don’t take up space on your disk and you’ll never have to hunt for an opearign system disc. Better yet, it will download up-to-date installation files so you don’t have to spend hours installing operating system updates later. Microsoft could learn a lot from Apple here. Restore From a Time Machine Backup Instead of reinstalling OS X, you can choose to restore your Mac from a time machine backup. This is like restoring a system image on another operating system. You’ll need an external disk containing a backup image created on the current computer to do this. Browse the Web The Get Help Online link opens the Safari web browser to Apple’s documentation site. It’s not limited to Apple’s website, though — you can navigate to any website you like. This feature allows you to access and use a browser on your Mac even if it isn’t booting properly. It’s ideal for looking up troubleshooting information. Manage Your Disks The Disk Utility option opens the same Disk Utility you can access from within Mac OS X. It allows you to partition disks, format them, scan disks for problems, wipe drives, and set up drives in a RAID configuration. If you need to edit partitions from outside your operating system, you can just boot into the recovery environment — you don’t have to download a special partitioning tool and boot into it. Choose the Default Startup Disk Click the Apple menu on the bar at the top of your screen and select Startup Disk to access the Choose Startup Disk tool. Use this tool to choose your computer’s default startup disk and reboot into another operating system. For example, it’s useful if you have Windows installed alongside Mac OS X with Boot Camp. Add or Remove an EFI Firmware Password You can also add a firmware password to your Mac. This works like a BIOS password or UEFI password on a Windows or Linux PC. Click the Utilities menu on the bar at the top of your screen and select Firmware Password Utility to open this tool. Use the tool to turn on a firmware password, which will prevent your computer from starting up from a different hard disk, CD, DVD, or USB drive without the password you provide. This prevents people form booting up your Mac with an unauthorized operating system. If you’ve already enabled a firmware password, you can remove it from here. Use Network Tools to Troubleshoot Your Connection Select Utilities > Network Utility to open a network diagnostic tool. This utility provides a graphical way to view your network connection information. You can also use the netstat, ping, lookup, traceroute, whois, finger, and port scan utilities from here. These can be helpful to troubleshoot Internet connection problems. For example, the ping command can demonstrate whether you can communicate with a remote host and show you if you’re experiencing packet loss, while the traceroute command can show you where a connection is failing if you can’t connect to a remote server. Open a Terminal If you’d like to get your hands dirty, you can select Utilities > Terminal to open a terminal from here. This terminal allows you to do more advanced troubleshooting. Mac OS X uses the bash shell, just as typical Linux distributions do. Most people will just need to use the Reinstall Mac OS X option here, but there are many other tools you can benefit from. If the Recovery Mode files on your Mac are damaged or unavailable, your Mac will automatically download them from Apple so you can use the full recovery environment.

    Read the article

  • Bluetooth DUN Tethering fails

    - by tacone
    I have an HTC Desire HD, with Android Froyo (2.2) and PDANet installed. I am using Ubuntu 10.10. I cannot tether it over Bluetooth either with Network Manager or BlueMan. (note, I installed Blueman only after failing with NetWork manager, and I even tried the last version from the PPA). With both my device is discovered, paired, setup. But connecting always fail. Network manager says it cannot get the details of my device Blueman says Connection Refused (111) Here are some relevant entries from syslog. Mar 11 22:13:00 tacone-macbook bluetoothd[2242]: Bluetooth deamon 4.69 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting SDP server Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting experimental netlink support Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to find Bluetooth netlink family Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to init netlink plugin Mar 11 22:13:00 tacone-macbook kernel: [ 158.284357] Bluetooth: L2CAP ver 2.14 Mar 11 22:13:00 tacone-macbook kernel: [ 158.284361] Bluetooth: L2CAP socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.446781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Mar 11 22:13:00 tacone-macbook kernel: [ 158.446784] Bluetooth: BNEP filters: protocol multicast Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 registered Mar 11 22:13:00 tacone-macbook kernel: [ 158.569481] Bluetooth: SCO (Voice Link) ver 0.6 Mar 11 22:13:00 tacone-macbook kernel: [ 158.569484] Bluetooth: SCO socket layer initialized Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 up Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting security manager 0 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: ioctl(HCIUNBLOCKADDR): Invalid argument (22) Mar 11 22:13:00 tacone-macbook kernel: [ 158.818600] Bluetooth: RFCOMM TTY layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818607] Bluetooth: RFCOMM socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818610] Bluetooth: RFCOMM ver 1.11 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Adapter /org/bluez/2242/hci0 has been enabled Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from ListDevices reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:13:00 tacone-macbook NetworkManager[1247]: <warn> bluez error getting adapter properties: Rejected send message, 1 matched rules; type="method_call", sender=":1.4" (uid=0 pid=1247 comm="NetworkManager) interface="org.bluez.Adapter" member="GetProperties" error name="(unset)" requested_reply=0 destination="org.bluez" (uid=0 pid=2242 comm="/usr/sbin/bluetoothd)) Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: return_link_keys (sba=00:23:6C:B5:03:6F, dba=00:23:6C:C0:F1:B0) Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:02 tacone-macbook bluetoothd[2243]: Discovery session 0x2262d7c0 with :1.45 activated Mar 11 22:15:15 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:15 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: io_capa_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:17 tacone-macbook bluetoothd[2243]: io_capa_response (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:18 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_notify (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE, type=5) Mar 11 22:15:28 tacone-macbook kernel: [ 306.585725] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.630757] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: Authentication requested Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:28 tacone-macbook kernel: [ 306.784829] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.857861] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: last message repeated 8 times Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:30 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0): probe requested by plugin 'Generic' Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:49 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:16:15 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:16:19 tacone-macbook kernel: [ 357.375108] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.169506] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.215529] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.281559] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.330588] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Any help ? PS: tethering via USB or WiFi is not an option, I need to do it over Bluetooth.

    Read the article

  • Lubuntu 13.10 unable to connect to cups localhost:631

    - by user142139
    I am using Lubuntu 13.10 (recently upgraded) and am trying to print to a network printer (HP photosmart 7960) through my router (US Robotics 5461). My printer is connected to the router via USB cable. Normally, I would use the cups configuration interface to set up the wireless connection to the printer. I was able to use the printer through the router wirelessly, using Ubuntu 12.04. Now, with my recently upgraded Lubuntu 13.10, I am unable to get the Cups config webpage (http://localhost:631) to come up. In Chromium, I get: This web page is not available. In Firefox, I get: Unable to connect. Firefox can't establish a connection to the server at localhost:631. The CUPS config file details are below. I have this website to help with the router connections for Linux: http://www.usr.com/support/5461/5461-files/printer_installation_linux/index.html My printer's address through the router is: http://192.168.2.1:1631/printers/My_Printer Can you tell me how to fix this? Or, what to add to the cups configuration file to make this work? Please help. Thanks psychicnut CUPS CONFIG FILE DETAILS: # Show general information in error_log. LogLevel warn MaxLogSize 0 SystemGroup lpadmin Listen /var/run/cups/cups.sock Listen /var/run/cups/cups.sock Listen 192.168.2.1:1631 Browsing Off BrowseLocalProtocols dnssd DefaultAuthType Basic WebInterface Yes <Location /> Order allow,deny </Location> <Location /admin> Order allow,deny </Location> <Location /admin/conf> AuthType Default Require user @SYSTEM Order allow,deny </Location> <Policy default> JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default <Limit Create-Job Print-Job Print-URI Validate-Job> Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> <Policy authenticated> JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default <Limit Create-Job Print-Job Print-URI Validate-Job> AuthType Default Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Cancel-Job CUPS-Authenticate-Job> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default

    Read the article

  • CodePlex Daily Summary for Sunday, March 07, 2010

    CodePlex Daily Summary for Sunday, March 07, 2010New ProjectsAlgorithminator: Universal .NET algorithm visualizer, which helps you to illustrate any algorithm, written in any .NET language. Still in development.ALToolkit: Contains a set of handy .NET components/classes. Currently it contains: * A Numeric Text Box (an Extended NumericUpDown) * A Splash Screen base fo...Automaton Home: Automaton is a home automation software built with a n-Tier, MVVM pattern utilzing WCF, EF, WPF, Silverlight and XBAP.Developer Controls: Developer Controls contains various controls to help build applications that can script/write code.Dynamic Reference Manager: Dynamic Reference Manager is a set (more like a small group) of classes and attributes written in C# that allows any .NET program to reference othe...indiologic: Utilities of an IndioNeural Cryptography in F#: This project is my magistracy resulting work. It is intended to be an example of using neural networks in cryptography. Hashing functions are chose...Particle Filter Visualization: Particle Filter Visualization Program for the Intel Science and Engineering FairPólya: Efficient, immutable, polymorphic collections. .Net lacks them, we provide them*. * By we, we mean I; and by efficient, I mean hopefully so.project euler solutions from mhinze: mhinze project euler solutionsSilverlight 4 and WCF multi layer: Silverlight 4 and WCF multi layersqwarea: Project for a browser-based, minimalistic, massively multiplayer strategy game. Part of the "Génie logiciel et Cloud Computing" course of the ENS (...SuperSocket: SuperSocket, a socket application framework can build FTP/SMTP/POP server easilyToast (for ASP.NET MVC): Dynamic, developer & designer friendly content injection, compression and optimization for ASP.NET MVCNew ReleasesALToolkit: ALToolkit 1.0: Binary release of the libraries containing: NumericTextBox SplashScreen Based on the VB.NET code, but that doesn't really matter.Blacklist of Providers: 1.0-Milestone 1: Blacklist of Providers.Milestone 1In this development release implemented - Main interface (Work Item #5453) - Database (Work Item #5523)C# Linear Hash Table: Linear Hash Table b2: Now includes a default constructor, and will throw an exception if capacity is not set to a power of 2 or loadToMaintain is below 1.Composure: CassiniDev-Trunk-40745-VS2010.rc1.NET4: A simple port of the CassiniDev portable web server project for Visual Studio 2010 RC1 built against .NET 4.0. The WCF tests currently fail unless...Developer Controls: DevControls: These are the version 1.0 releases of these controls. Download the individually or all together (in a .zip file). More releases coming soon!Dynamic Reference Manager: DRM Alpha1: This is the first release. I'm calling it Alpha because I intend implementing other functions, but I do not intend changing the way current functio...ESB Toolkit Extensions: Tellago SOA ESB Extenstions v0.3: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...GKO Libraries: GKO Libraries 0.1 Alpha: 0.1 AlphaHome Access Plus+: v3.0.3.0: Version 3.0.3.0 Release Change Log: Added Announcement Box Removed script files that aren't needed Fixed & issue in directory path Stylesheet...Icarus Scene Engine: Icarus Scene Engine 1.10.306.840: Icarus Professional, Icarus Player, the supporting software for Icarus Scene Engine, with some included samples, and the start of a tutorial (with ...mavjuz WndLpt: wndlpt-0.2.5: New: Response to 5 LPT inputs "test i 1" New: Reaction to 12 LPT outputs "test q 8" New: Reaction to all LPT pins "test pin 15" New: Syntax: ...Neural Cryptography in F#: Neural Cryptography 0.0.1: The most simple version of this project. It has a neural network that works just like logical AND and a possibility to recreate neural network from...Password Provider: 1.0.3: This release fixes a bug which caused the program to crash when double clicking on a generic item.RoTwee: RoTwee 6.2.0.0: New feature is as next. 16649 Add hashtag for tweet of tune.Now you can tweet your playing tune with hashtag.Visual Studio DSite: Picture Viewer (Visual C++ 2008): This example source code allows you to view any picture you want in the click of a button. All you got to do is click the button and browser via th...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.8.00: Whats New File Browser: Folders & Files View reworked File Browser: Folders & Files View reworked File Browser: Folders are displayed as TreeVi...WSDLGenerator: WSDLGenerator 0.0.0.4: - replaced CommonLibrary.dll by CommandLineParser.dll - added better support for custom complex typesMost Popular ProjectsMetaSharpSilverlight ToolkitASP.NET Ajax LibraryAll-In-One Code FrameworkWindows 7 USB/DVD Download Toolニコ生アラートWindows Double ExplorerVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Caliburn: An Application Framework for WPF and SilverlightArkSwitchMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFasterflect - A Fast and Simple Reflection APIFluent Assertions

    Read the article

  • Cant correctly install Lazarus

    - by user206316
    I have a little problem with installing and running Lazarus. I just upgrade ubuntu from 13.04 to 13.10. When i had 13.04, i could install lazarus without any problems, but in 13.10 lazarus magicaly dissapeared, and when i tried install it from ubuntu software center, it said something like in my software resources lazarus-ide-0.9.30.4 doesnt exist. After some research on net i tried delete all files from earlier installations, download deb packages from sourceforge and install them, but when i want to instal fpc-src, error shows up with output: (Reading database ... 100% (Reading database ... 239063 files and directories currently installed.) Unpacking fpc-src (from .../Stiahnut/Lazarus/fpc-src.deb) ... dpkg: error processing /home/richi/Stiahnut/Lazarus/fpc-src.deb (--install): trying to overwrite '/usr/share/fpcsrc/2.6.2/rtl/nativent/tthread.inc', which is also in package fpc-source-2.6.2 2.6.2-5 dpkg-deb (subprocess): decompressing archive member: internal gzip write error: Broken pipe dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg-deb (subprocess): cannot copy archive member from '/home/richi/Stiahnut/Lazarus/fpc-src.deb' to decompressor pipe: failed to write (Broken pipe) when i started lazarus, it of course tell me that it cant find fpc compier and fpc sources. So, please, i really need program for school and i dont wanna reinstall os anymore or something like that :( (Ubuntu 13.10 64bit) P.S: im not skilled in linux so if u know some commands to fix it just write them for copy and paste :) P.P.S:Sorry for bad English, im Slovak xD P.P.P.S: Thank so much for any answers update: output from sudo dpkg -l | grep "^rc" richi@Richi-Ubuntu:~/lazarus1.0.12$ sudo dpkg -l | grep "^rc" rc account-plugin-generic-oauth 0.10bzr13.03.26-0ubuntu1.1 amd64 GNOME Control Center account plugin for single signon - generic OAuth rc appmenu-gtk:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc appmenu-gtk3:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc fp-compiler-2.6.0 2.6.0-9 amd64 Free Pascal - compiler rc fp-utils-2.6.0 2.6.0-9 amd64 Free Pascal - utilities rc lazarus-ide-0.9.30.4 0.9.30.4-4 amd64 IDE for Free Pascal - common IDE files rc lazarus-ide-1.0.10 1.0.10+dfsg-1 amd64 IDE for Free Pascal - common IDE files rc lcl-utils-0.9.30.4 0.9.30.4-4 amd64 Lazarus Components Library - command line build tools rc lcl-utils-1.0.10 1.0.10+dfsg-1 amd64 Lazarus Components Library - command line build tools rc libbamf3-1:amd64 0.4.0daily13.06.19~13.04-0ubuntu1 amd64 Window matching library - shared library rc libboost-filesystem1.49.0 1.49.0-4 amd64 filesystem operations (portable paths, iteration over directories, etc) in C++ rc libboost-signals1.49.0 1.49.0-4 amd64 managed signals and slots library for C++ rc libboost-system1.49.0 1.49.0-4 amd64 Operating system (e.g. diagnostics support) library rc libboost-thread1.49.0 1.49.0-4 amd64 portable C++ multi-threading rc libbrlapi0.5:amd64 4.4-8ubuntu4 amd64 braille display access via BRLTTY - shared library rc libcamel-1.2-40 3.6.4-0ubuntu1.1 amd64 Evolution MIME message handling library rc libcolumbus0-0 0.4.0daily13.04.16~13.04-0ubuntu1 amd64 error tolerant matching engine - shared library rc libdns95 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 DNS Shared Library used by BIND rc libdvbpsi7 0.2.2-1 amd64 library for MPEG TS and DVB PSI tables decoding and generating rc libebackend-1.2-5 3.6.4-0ubuntu1.1 amd64 Utility library for evolution data servers rc libedata-book-1.2-15 3.6.4-0ubuntu1.1 amd64 Backend library for evolution address books rc libedata-cal-1.2-18 3.6.4-0ubuntu1.1 amd64 Backend library for evolution calendars rc libgc1c3:amd64 1:7.2d-0ubuntu5 amd64 conservative garbage collector for C and C++ rc libgd2-xpm:amd64 2.0.36~rc1~dfsg-6.1ubuntu1 amd64 GD Graphics Library version 2 rc libgd2-xpm:i386 2.0.36~rc1~dfsg-6.1ubuntu1 i386 GD Graphics Library version 2 rc libgnome-desktop-3-4 3.6.3-0ubuntu1 amd64 Utility library for loading .desktop files - runtime files rc libgphoto2-2:amd64 2.4.14-2 amd64 gphoto2 digital camera library rc libgphoto2-2:i386 2.4.14-2 i386 gphoto2 digital camera library rc libgphoto2-port0:amd64 2.4.14-2 amd64 gphoto2 digital camera port library rc libgphoto2-port0:i386 2.4.14-2 i386 gphoto2 digital camera port library rc libgtksourceview-3.0-0:amd64 3.6.3-0ubuntu1 amd64 shared libraries for the GTK+ syntax highlighting widget rc libgweather-3-1 3.6.2-0ubuntu1 amd64 GWeather shared library rc libharfbuzz0:amd64 0.9.13-1 amd64 OpenType text shaping engine rc libibus-1.0-0:amd64 1.4.2-0ubuntu2 amd64 Intelligent Input Bus - shared library rc libical0 0.48-2 amd64 iCalendar library implementation in C (runtime) rc libimobiledevice3 1.1.4-1ubuntu6.2 amd64 Library for communicating with the iPhone and iPod Touch rc libisc92 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 ISC Shared Library used by BIND rc libkms1:amd64 2.4.46-1 amd64 Userspace interface to kernel DRM buffer management rc libllvm3.2:i386 1:3.2repack-7ubuntu1 i386 Low-Level Virtual Machine (LLVM), runtime library rc libmikmod2:amd64 3.1.12-5 amd64 Portable sound library rc libpackagekit-glib2-14:amd64 0.7.6-3ubuntu1 amd64 Library for accessing PackageKit using GLib rc libpoppler28:amd64 0.20.5-1ubuntu3 amd64 PDF rendering library rc libraw5:amd64 0.14.7-0ubuntu1.13.04.2 amd64 raw image decoder library rc librhythmbox-core6 2.98-0ubuntu5 amd64 support library for the rhythmbox music player rc libsdl-mixer1.2:amd64 1.2.12-7ubuntu1 amd64 Mixer library for Simple DirectMedia Layer 1.2, libraries rc libsnmp15 5.4.3~dfsg-2.7ubuntu1 amd64 SNMP (Simple Network Management Protocol) library rc libsyncdaemon-1.0-1 4.2.0-0ubuntu1 amd64 Ubuntu One synchronization daemon library rc libunity-core-6.0-5 7.0.0daily13.06.19~13.04-0ubuntu1 amd64 Core library for the Unity interface. rc libusb-0.1-4:i386 2:0.1.12-23.2ubuntu1 i386 userspace USB programming library rc libwayland0:amd64 1.0.5-0ubuntu1 amd64 wayland compositor infrastructure - shared libraries rc linux-image-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc screen-resolution-extra 0.15ubuntu1 all Extension for the GNOME screen resolution applet rc unity-common 7.0.0daily13.06.19~13.04-0ubuntu1 all Common files for the Unity interface.

    Read the article

  • Can't install wine (or ia32-libs) in Ubuntu 12.10 64 bit

    - by carestad
    As already pointed out here, people seems to have issues with installing wine in the latest version of Ubuntu. I'm suspecting this only happens with 64 bit users. For example, when trying to install wine, wine1.4, wine1.4:i386, wine1.5, wine1.5:i386, ia32-libs or ia32-libs:i386 with apt-get, I get a lot of dependency errors. Doing a sudo apt-get -f install doesn't seem to do the trick, neither does using aptitude. The errors I get is normally that the packages depend on some :i386 package, but installing those manually doesn't work either because they also have dependency issues (isn't APT supposed to do this automatically?!). I also downloaded CrossOver today and tried installing the .deb manually, but the dependency issues show up there as well. When running sudo apt-get -f install after trying to install the CrossOver .deb, apt-get wants to purge the following packages: ia32-crossover intel-gpu-tools libdrm-nouveau2 libgl1-mesa-dri libva-x11-1 ubuntu-desktop vlc xorg xserver-xorg-video-ati xserver-xorg-video-intel xserver-xorg-video-modesetting xserver-xorg-video-openchrome xserver-xorg-video-radeon xserver-xorg-video-vmware What I've tried so far (and didn't work): Installing synaptic, reloading my repositories, searching for ia32 and installing ia32-libs. Using Ubuntu Software Center to install Wine and ia32-libs. Using apt-get and aptitude to install all the differend varieties of the wine packages, both with and without the :i386 and -amd64 suffixes in package names. Disabling the universe and multiverse repos, run a sudo apt-get update and then re-enable them again. Boot a newly downloaded Ubuntu 12.10 x64 live USB and try to install all the different packages there. What I haven't tried (yet): Boot a newly downloaded Ubuntu 12.10 x32 image and try to install wine there (I'm just guessing that will work). Reinstall Ubuntu. Throw my computer out a window. wine alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine : Depends: wine1.5 but it is not going to be installed E: Unable to correct problems, you have held broken packages. wine-1.4 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4 (...) The following packages have unmet dependencies: wine1.4 : Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.4:i386 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.4:i386 : Depends: wine1.4-i386:i386 (= 1.4.1-0ubuntu1) Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. wine-1.5 alexander@cosmo:~$ sudo apt-get install wine1.5 (...) The following packages have unmet dependencies: wine1.5 : Depends: wine1.5-i386 (= 1.5.16-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.5:i386 alexander@cosmo:~$ sudo apt-get install wine1.5:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.5:i386 : Depends: wine1.5-i386:i386 (= 1.5.16-0ubuntu1) but it is not going to be installed Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. ia32-libs alexander@cosmo:~$ sudo apt-get install ia32-libs (...) The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. ia32-libs:i386 alexander@cosmo:~$ sudo apt-get install ia32-libs:i386 (...) Package ia32-libs:i386 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: lib32z1 lib32ncurses5 lib32bz2-1.0 lib32asound2 E: Package 'ia32-libs:i386' has no installation candidate

    Read the article

  • Make a Drive Image Using an Ubuntu Live CD

    - by Trevor Bekolay
    Cloning a hard drive is useful, but what if you have to make several copies, or you just want to make a complete backup of a hard drive? Drive images let you put everything, and we mean everything, from your hard drive in one big file. With an Ubuntu Live CD, this is a simple process – the versatile tool dd can do this for us right out of the box. We’ve used dd to clone a hard drive before. Making a drive image is very similar, except instead of copying data from one hard drive to another, we copy from a hard drive to a file. Drive images are more flexible, as you can do what you please with the data once you’ve pulled it off the source drive. Your drive image is going to be a big file, depending on the size of your source drive – dd will copy every bit of it, even if there’s only one tiny file stored on the whole hard drive. So, to start, make sure you have a device connected to your computer that will be large enough to hold the drive image. Some ideas for places to store the drive image, and how to connect to them in an Ubuntu Live CD, can be found at this previous Live CD article. In this article, we’re going to make an image of a 1GB drive, and store it on another hard drive in the same PC. Note: always be cautious when using dd, as it’s very easy to completely wipe out a drive, as we will show later in this article. Creating a Drive Image Boot up into the Ubuntu Live CD environment. Since we’re going to store the drive image on a local hard drive, we first have to mount it. Click on Places and then the location that you want to store the image on – in our case, a 136GB internal drive. Open a terminal window (Applications > Accessories > Terminal) and navigate to the newly mounted drive. All mounted drives should be in /media, so we’ll use the command cd /media and then type the first few letters of our difficult-to-type drive, press tab to auto-complete the name, and switch to that directory. If you wish to place the drive image in a specific folder, then navigate to it now. We’ll just place our drive image in the root of our mounted drive. The next step is to determine the identifier for the drive you want to make an image of. In the terminal window, type in the command sudo fdisk -l Our 1GB drive is /dev/sda, so we make a note of that. Now we’ll use dd to make the image. The invocation is sudo dd if=/dev/sda of=./OldHD.img This means that we want to copy from the input file (“if”) /dev/sda (our source drive) to the output file (“of”) OldHD.img, which is located in the current working directory (that’s the “.” portion of the “of” string). It takes some time, but our image has been created…Let’s test to make sure it works. Drive Image Testing: Wiping the Drive Another interesting thing that dd can do is totally wipe out the data on a drive (a process we’ve covered before). The command for that is sudo dd if=/dev/urandom of=/dev/sda This takes some random data as input, and outputs it to our drive, /dev/sda. If we examine the drive now using sudo fdisk –l, we can see that the drive is, indeed, wiped. Drive Image Testing: Restoring the Drive Image We can restore our drive image with a call to dd that’s very similar to how we created the image. The only difference is that the image is going to be out input file, and the drive now our output file. The exact invocation is sudo dd if=./OldHD.img of=/dev/sda It takes a while, but when it’s finished, we can confirm with sudo fdisk –l that our drive is back to the way it used to be! Conclusion There are a lots of reasons to create a drive image, with backup being the most obvious. Fortunately, with dd creating a drive image only takes one line in a terminal window – if you’ve got an Ubuntu Live CD handy! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayHow to Browse Without a Trace with an Ubuntu Live CDWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy WayClone a Hard Drive Using an Ubuntu Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

    Read the article

  • doubleTwist is an iTunes Alternative that Supports Several Devices

    - by Mysticgeek
    There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

    Read the article

  • How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

    - by Chris Hoffman
    Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

    Read the article

  • Searching for the Perfect Developer&rsquo;s Laptop.

    - by mbcrump
    I have been in the market for a new computer for several months. I set out with a budget of around $1200. I knew up front that the machine would be used for developing applications and maybe some light gaming. I kept switching between buying a laptop or a desktop but the laptop won because: With a Laptop, I can carry it everywhere and with a desktop I can’t. I searched for about 2 weeks and narrowed it down to a list of must-have’s : i7 Processor (I wasn’t going to settle for an i5 or AMD. I wanted a true Quad-core machine, not 2 dual-core fused together). 15.6” monitor SSD 128GB or Larger. – It’s almost 2011 and I don’t want an old standard HDD in this machine. 8GB of DDR3 Ram. – The more the better, right? 1GB Video Card (Prefer NVidia) – I might want to play games with this. HDMI Port – Almost a standard on new Machines. This would be used when I am on the road and want to stream Netflix to the HDTV in the Hotel room. Webcam Built-in – This would be to video chat with the wife and kids if I am on the road. 6-Cell Battery. – I’ve read that an i7 in a laptop really kills the battery. A 6-cell or 9-cell is even better. That is a pretty long list for a budget of around $1200. I searched around the internet and could not buy this machine prebuilt for under $1200. That was even with coupons and my company’s 10% Dell discount. The only way that I would get a machine like this was to buy a prebuilt and replace parts. I chose the  Lenovo Y560 on Newegg to start as my base. Below is a top-down picture of it.   Part 1: The Hardware The Specs for this machine: Color :  GrayOperating System : Windows 7 Home Premium 64-bitCPU Type : Intel Core i7-740QM(1.73GHz)Screen : 15.6" WXGAMemory Size : 4GB DDR3Hard Disk : 500GBOptical Drive : DVD±R/RWGraphics Card : ATI Mobility Radeon HD 5730Video Memory : 1GBCommunication : Gigabit LAN and WLANCard slot : 1 x Express Card/34Battery Life : Up to 3.5 hoursDimensions : 15.20" x 10.00" x 0.80" - 1.30"Weight : 5.95 lbs. This computer met most of the requirements above except that it didn’t come with an SSD or have 8GB of DDR3 Memory. So, I needed to start shopping except this time for an SSD. I asked around on twitter and other hardware forums and everyone pointed me to the Crucial C300 SSD. After checking prices of the drive, it was going to cost an extra $275 bucks and I was going from a spacious 500GB drive to 128GB. After watching some of the SSD videos on YouTube I started feeling better. Below is a pic of the Crucial C300 SSD. The second thing that I needed to upgrade was the RAM. It came with 4GB of DDR3 RAM, but it was slow. I decided to buy the Crucial 8GB (4GB x 2) Kit from Newegg. This RAM cost an extra $120 and had a CAS Latency of 7. In the end this machine delivered everything that I wanted and it cost around $1300. You are probably saying, well your budget was $1200. I have spare parts that I’m planning on selling on eBay or Anandtech.  =) If you are interested then shoot me an email and I will give you a great deal mbcrump[at]gmail[dot]com. 500GB Laptop 7200RPM HDD 4GB of DDR3 RAM (2GB x 2) faceVision HD 720p Camera – Unopened In the end my Windows Experience Rating of the SSD was 7.7 and the CPU 7.1. The max that you can get is a 7.9. Part 2: The Software I’m very lucky that I get a lot of software for free. When choosing a laptop, the OS really doesn’t matter because I would never keep the bloatware pre-installed or Windows 7 Home Premium on my main development machine. Matter of fact, as soon as I got the laptop, I immediately took out the old HDD without booting into it. After I got the SSD into the machine, I installed Windows 7 Ultimate 64-Bit. The BIOS was out of date, so I updated that to the latest version and started downloading drivers off of Lenovo’s site. I had to download the Wireless Networking Drivers to a USB-Key before I could get my machine on my wireless network. I also discovered that if the date on your computer is off then you cannot join the Windows 7 Homegroup until you fix it. I’m aware that most people like peeking into what programs other software developers use and I went ahead and listed my “essentials” of a fresh build. I am a big Silverlight guy, so naturally some of the software listed below is specific to Silverlight. You should also check out my master list of Tools and Utilities for the .NET Developer. See a killer app that I’m missing? Feel free to leave it in the comments below. My Software Essential List. CPU-Z Dropbox Everything Search Tool Expression Encoder Update Expression Studio 4 Ultimate Foxit Reader Google Chrome Infragistics NetAdvantage Ultimate Edition Keepass Microsoft Office Professional Plus 2010 Microsoft Security Essentials 2  Mindscape Silverlight Elements Notepad 2 (with shell extension) Precode Code Snippet Manager RealVNC Reflector ReSharper v5.1.1753.4 Silverlight 4 Toolkit Silverlight Spy Snagit 10 SyncFusion Reporting Controls for Silverlight Telerik Silverlight RadControls TweetDeck Virtual Clone Drive Visual Studio 2010 Feature Pack 2 Visual Studio 2010 Ultimate VS KB2403277 Update to get Feature Pack 2 to work. Windows 7 Ultimate 64-Bit Windows Live Essentials 2011 Windows Live Writer Backup. Windows Phone Development Tools That is pretty much it, I have a new laptop and am happy with the purchase. If you have any questions then feel free to leave a comment below.  Subscribe to my feed

    Read the article

  • using isight camera in macbookpro(8,2) on ubuntu 12.04 virtualbox VM

    - by Kurt Spindler
    I'm having a lot of trouble using the built-in isight camera on my macbookpro8,2 (early 2011) from an ubuntu 12.04 virtual machine, run inside VirtualBox. The following is the log I get when I try to run guvcview ubuntu@ubuntu:~$ guvcview guvcview 1.5.3 ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71 ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. FaceTime HD Camera (Built-in) (location: usb-0000:00:0b.0-1) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/10, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, vid:05ac pid:8509 driver:uvcvideo checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls no codec detected for H264 no codec detected for MP3 - (lavc) Checking video mode 960x540@32bpp : OK Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable write /home/ubuntu/.guvcviewrc OK free controls cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK ubuntu@ubuntu:~$ Any help would be greatly appreciated. Only clue I have is that I initially was having problems, tried using the old method of fixing isights (involving installing isight-firmware-tools) before realizing that I just hadn't turned on the VM setting to allow the VM to access the webcam. :) Anyway, I wonder if installing that messed something up. However, I think this is a red herring because I've: shut down and turned back on the Mac, restarted the VM, tried a different VM (for which I never installed isight-firmware-tools, and created an entirely new ubuntu vm. All instances have had this problem. Similarly, other viewers, such as cheese, avplay, avconv have had all various kinds of errors.

    Read the article

  • How to Play PC Games on Your TV

    - by Chris Hoffman
    No need to wait for Valve’s Steam Machines — connect your Windows gaming PC to your TV and use powerful PC graphics in the living room today. It’s easy — you don’t need any unusual hardware or special software. This is ideal if you’re already a PC gamer who wants to play your games on a larger screen. It’s also convenient if you want to play multiplayer PC games with controllers in your living rom. HDMI Cables and Controllers You’ll need an HDMI cable to connect your PC to your television. This requires a TV with HDMI-in, a PC with HDMI-out, and an HDMI cable. Modern TVs and PCs have had HDMI built in for years, so you should already be good to go. If you don’t have a spare HDMI cable lying around, you may have to buy one or repurpose one of your existing HDMI cables. Just don’t buy the expensive HDMI cables — even a cheap HDMI cable will work just as well as a more expensive one. Plug one end of the HDMI cable into the HDMI-out port on your PC and one end into the HDMI-In port on your TV. Switch your TV’s input to the appropriate HDMI port and you’ll see your PC’s desktop appear on your TV.  Your TV becomes just another external monitor. If you have your TV and PC far away from each other in different rooms, this won’t work. If you have a reasonably powerful laptop, you can just plug that into your TV — or you can unplug your desktop PC and hook it up next to your TV. Now you’ll just need an input device. You probably don’t want to sit directly in front of your TV with a wired keyboard and mouse! A wireless keyboard and wireless mouse can be convenient and may be ideal for some games. However, you’ll probably want a game controller like console players use. Better yet, get multiple game controllers so you can play local-multiplayer PC games with other people. The Xbox 360 controller is the ideal controller for PC gaming. Windows supports these controllers natively, and many PC games are designed specifically for these controllers. Note that Xbox One controllers aren’t yet supported on Windows because Microsoft hasn’t released drivers for them. Yes, you could use a third-party controller or go through the process of pairing a PlayStation controller with your PC using unofficial tools, but it’s better to get an Xbox 360 controller. Just plug one or more Xbox controllers into your PC’s USB ports and they’ll work without any setup required. While many PC games to support controllers, bear in mind that some games require a keyboard and mouse. A TV-Optimized Interface Use Steam’s Big Picture interface to more easily browse and launch games. This interface was designed for using on a television with controllers and even has an integrated web browser you can use with your controller. It will be used on the Valve’s Steam Machine consoles as the default TV interface. You can use a mouse with it too, of course. There’s also nothing stopping you from just using your Windows desktop with a mouse and keyboard — aside from how inconvenient it will be. To launch Big Picture Mode, open Steam and click the Big Picture button at the top-right corner of your screen. You can also press the glowing Xbox logo button in the middle of an Xbox 360 Controller to launch the Big Picture interface if Steam is open. Another Option: In-Home Streaming If you want to leave your PC in one room of your home and play PC games on a TV in a different room, you can consider using local streaming to stream games over your home network from your gaming PC to your television. Bear in mind that the game won’t be as smooth and responsive as it would if you were sitting in front of your PC. You’ll also need a modern router with fast wireless network speeds to keep up with the game streaming. Steam’s built-in In-Home Streaming feature is now available to everyone. You could plug a laptop with less-powerful graphics hardware into your TV and use it to stream games from your powerful desktop gaming rig. You could also use an older desktop PC you have lying around. To stream a game, log into Steam on your gaming PC and log into Steam with the same account on another computer on your home network. You’ll be able to view the library of installed games on your other PC and start streaming them. NVIDIA also has their own GameStream solution that allows you to stream games from a PC with powerful NVIDIA graphics hardware. However, you’ll need an NVIDIA Shield handheld gaming console to do this. At the moment, NVIDIA’s game streaming solution can only stream to the NVIDIA Shield. However, the NVIDIA Shield device can be connected to your TV so you can play that streaming game on your TV. Valve’s Steam Machines are supposed to bring PC gaming to the living room and they’ll do it using HDMI cables, a custom Steam controller, the Big Picture interface, and in-home streaming for compatibility with Windows games. You can do all of this yourself today — you’ll just need an Xbox 360 controller instead of the not-yet-released Steam controller. Image Credit: Marco Arment on Flickr, William Hook on Flickr, Lewis Dowling on Flickr

    Read the article

  • JavaOne 2012 Sunday Strategy Keynote

    - by Janice J. Heiss
    At the Sunday Strategy Keynote, held at the Masonic Auditorium, Hasan Rizvi, EVP, Middleware and Java Development, stated that the theme for this year's JavaOne is: “Make the future Java”-- meaning that Java continues in its role as the most popular, complete, productive, secure, and innovative development platform. But it also means, he qualified, the process by which we make the future Java -- an open, transparent, collaborative, and community-driven evolution. "Many of you have bet your businesses and your careers on Java, and we have bet our business on Java," he said.Rizvi detailed the three factors they consider critical to the success of Java--technology innovation, community participation, and Oracle's leadership/stewardship. He offered a scorecard in these three realms over the past year--with OS X and Linux ARM support on Java SE, open sourcing of JavaFX by the end of the year, the release of Java Embedded Suite 7.0 middleware platform, and multiple releases on the Java EE side. The JCP process continues, with new JSR activity, and JUGs show a 25% increase in participation since last year. Oracle, meanwhile, continues its commitment to both technology and community development/outreach--with four regional JavaOne conferences last year in various part of the world, as well as the release of Java Magazine, with over 120,000 current subscribers. Georges Saab, VP Development, Java SE, next reviewed features of Java SE 7--the first major revision to the platform under Oracle's stewardship, which has included near-monthly update releases offering hundreds of fixes, performance enhancements, and new features. Saab indicated that developers, ISVs, and hosting providers have all been rapid adopters of the platform. He also noted that Oracle's entire Fusion middleware stack is supported on SE 7. The supported platforms for SE 7 has also increased--from Windows, Linux, and Solaris, to OS X, Linux ARM, and the emerging ARM micro-server market. "In the last year, we've added as many new platforms for Java, as were added in the previous decade," said Saab.Saab also explored the upcoming JDK 8 release--including Project Lambda, Project Nashorn (a modern implementation of JavaScript running on the JVM), and others. He noted that Nashorn functionality had already been used internally in NetBeans 7.3, and announced that they were planning to contribute the implementation to OpenJDK. Nandini Ramani, VP Development, Java Client, ME and Card, discussed the latest news pertaining to JavaFX 2.0--releases on Windows, OS X, and Linux, release of the FX Scene Builder tool, the JavaFX WebView component in NetBeans 7.3, and an OpenJFX project in OpenJDK. Nandini announced, as of Sunday, the availability for download of JavaFX on Linux ARM (developer preview), as well as Scene Builder on Linux. She noted that for next year's JDK 8 release, JavaFX will offer 3D, as well as third-party component integration. Avinder Brar, Senior Software Engineer, Navis, and Dierk König, Canoo Fellow, next took the stage and demonstrated all that JavaFX offers, with a feature-rich, animation-rich, real-time cargo management application that employs Canoo's just open-sourced Dolphin technology.Saab also explored Java SE 9 and beyond--Jigsaw modularity, Penrose Project for interoperability with OSGi, improved multi-tenancy for Java in the cloud, and Project Sumatra. Phil Rogers, HSA Foundation President and AMD Corporate Fellow, explored heterogeneous computing platforms that combine the CPU and the parallel processor of the GPU into a single piece of silicon and shared memory—a hardware technology driven by such advanced functionalities as HD video, face recognition, and cloud workloads. Project Sumatra is an OpenJDK project targeted at bringing Java to such heterogeneous platforms--with hardware and software experts working together to modify the JVM for these advanced applications and platforms.Ramani next discussed the latest with Java in the embedded space--"the Internet of things" and M2M--declaring this to be "the next IT revolution," with Java as the ideal technology for the ecosystem. Last week, Oracle released Java ME Embedded 3.2 (for micro-contollers and low-power devices), and Java Embedded Suite 7.0 (a middleware stack based on Java SE 7). Axel Hansmann, VP Strategy and Marketing, Cinterion, explored his company's use of Java in M2M, and their new release of EHS5, the world's smallest 3G-capable M2M module, running Java ME Embedded. Hansmaan explained that Java offers them the ability to create a "simple to use, scalable, coherent, end-to-end layer" for such diverse edge devices.Marc Brule, Chief Financial Office, Royal Canadian Mint, also explored the fascinating use-case of JavaCard in his country's MintChip e-cash technology--deployable on smartphones, USB device, computer, tablet, or cloud. In parting, Ramani encouraged developers to download the latest releases of Java Embedded, and try them out.Cameron Purdy, VP, Fusion Middleware Development and Java EE, summarized the latest developments and announcements in the Enterprise space--greater developer productivity in Java EE6 (with more on the way in EE 7), portability between platforms, vendors, and even cloud-to-cloud portability. The earliest version of the Java EE 7 SDK is now available for download--in GlassFish 4--with WebSocket support, better JSON support, and more. The final release is scheduled for April of 2013. Nicole Otto, Senior Director, Consumer Digital Technology, Nike, explored her company's Java technology driven enterprise ecosystem for all things sports, including the NikeFuel accelerometer wrist band. Looking beyond Java EE 7, Purdy mentioned NoSQL database functionality for EE 8, the concurrency utilities (possibly in EE 7), some of the Avatar projects in EE 7, some in EE 8, multi-tenancy for the cloud, supporting SaaS applications, and more.Rizvi ended by introducing Dr. Robert Ballard, oceanographer and National Geographic Explorer in Residence--part of Oracle's philanthropic relationship with the National Geographic Society to fund K-12 education around ocean science and conservation. Ballard is best known for having discovered the wreckage of the Titanic. He offered a fascinating video and overview of the cutting edge technology used in such deep-sea explorations, noting that in his early days, high-bandwidth exploration meant that you’d go down in a submarine and "stick your face up against the window." Now, it's a remotely operated, technology telepresence--"I think of my Hercules vehicle as my equivalent of a Na'vi. When I go beneath the sea, I actually send my spirit." Using high bandwidth satellite links, such amazing explorations can now occur via smartphone, laptop, or whatever platform. Ballard’s team regularly offers live feeds and programming out to schools and the world, spanning 188 countries--with embedding educators as part of the expeditions. It's technology at its finest, inspiring the next-generation of scientists and explorers!

    Read the article

  • The Linux powered LAN Gaming House

    - by sachinghalot
    LAN parties offer the enjoyment of head to head gaming in a real-life social environment. In general, they are experiencing decline thanks to the convenience of Internet gaming, but Kenton Varda is a man who takes his LAN gaming very seriously. His LAN gaming house is a fascinating project, and best of all, Linux plays a part in making it all work.Varda has done his own write ups (short, long), so I'm only going to give an overview here. The setup is a large house with 12 gaming stations and a single server computer.The client computers themselves are rack mounted in a server room, and they are linked to the gaming stations on the floor above via extension cables (HDMI for video and audio and USB for mouse and keyboard). Each client computer, built into a 3U rack mount case, is a well specced gaming rig in its own right, sporting an Intel Core i5 processor, 4GB of RAM and an Nvidia GeForce 560 along with a 60GB SSD drive.Originally, the client computers ran Ubuntu Linux rather than Windows and the games executed under WINE, but Varda had to abandon this scheme. As he explains on his site:"Amazingly, a majority of games worked fine, although many had minor bugs (e.g. flickering mouse cursor, minor rendering artifacts, etc.). Some games, however, did not work, or had bad bugs that made them annoying to play."Subsequently, the gaming computers have been moved onto a more conventional gaming choice, Windows 7. It's a shame that WINE couldn't be made to work, but I can sympathize as it's rare to find modern games that work perfectly and at full native speed. Another problem with WINE is that it tends to suffer from regressions, which is hardly surprising when considering the difficulty of constantly improving the emulation of the Windows API. Varda points out that he preferred working with Linux clients as they were easier to modify and came with less licensing baggage.Linux still runs the server and all of the tools used are open source software. The hardware here is a Intel Xeon E3-1230 with 4GB of RAM. The storage hanging off this machine is a bit more complex than the clients. In addition to the 60GB SSD, it also has 2x1TB drives and a 240GB SDD.When the clients were running Linux, they booted over PXE using a toolchain that will be familiar to anyone who has setup Linux network booting. DHCP pointed the clients to the server which then supplied PXELINUX using TFTP. When booted, file access was accomplished through network block device (NBD). This is a very easy to use system that allows you to serve the contents of a file as a block device over the network. The client computer runs a user mode device driver and the device can be mounted within the file system using the mount command.One snag with offering file access via NBD is that it's difficult to impose any security restrictions on different areas of the file system as the server only sees a single file. The advantage is perfomance as the client operating system simply sees a block device, and besides, these security issues aren't relevant in this setup.Unfortunately, Windows 7 can't use NBD, so, Varda had to switch to iSCSI (which works in both server and client mode under Linux). His network cards are not compliant with this standard when doing a netboot, but fortunately, gPXE came to the rescue, and he boostraps it over PXE. gPXE is also available as an ISO image and is worth knowing about if you encounter an awkward machine that can't manage a network boot. It can also optionally boot from a HTTP server rather than the more traditional TFTP server.According to Varda, booting all 12 machines over the Gigabit Ethernet network is surprisingly fast, and once booted, the machines don't seem noticeably slower than if they were using local storage. Once loaded, most games attempt to load in as much data as possible, filling the RAM, and the the disk and network bandwidth required is small. It's worth noting that these are aspects of this project that might differ from some other thin client scenarios.At time of writing, it doesn't seem as though the local storage of the client machines is being utilized. Instead, the clients boot into Windows from an image on the server that contains the operating system and the games themselves. It uses the copy on write feature of LVM so that any writes from a client are added to a differencing image allocated to that client. As the administrator, Varda can log into the Linux server and authorize changes to the master image for updates etc.SummaryOverall, Varda estimates the total cost of the project at about $40,000, and of course, he needed a property that offered a large physical space in order to house the computers and the gaming workstations. Obviously, this project has stark differences to most thin client projects. The balance between storage, network usage, GPU power and security would not be typical of an office installation, for example. The only letdown is that WINE proved to be insufficiently compatible to run a wide variety of modern games, but that is, perhaps, asking too much of it, and hats off to Varda for trying to make it work.

    Read the article

  • Session Report - Modern Software Development Anti-Patterns

    - by Janice J. Heiss
    In this standing-room-only session, building upon his 2011 JavaOne Rock Star “Diabolical Developer” session, Martijn Verburg, this time along with Ben Evans, identified and explored common “anti-patterns” – ways of doing things that keep developers from doing their best work. They emphasized the importance of social interaction and team communication, along with identifying certain psychological pitfalls that lead developers astray. Their emphasis was less on technical coding errors and more how to function well and to keep one’s focus on what really matters. They are the authors of the highly regarded The Well-Grounded Java Developer and are both movers and shakers in the London JUG community and on the Java Community Process. The large room was packed as they gave a fast-moving, witty presentation with lots of laughs and personal anecdotes. Below are a few of the anti-patterns they discussed.Anti-Pattern One: Conference-Driven DeliveryThe theme here is the belief that “Real pros hack code and write their slides minutes before their talks.” Their response to this anti-pattern is an expression popular in the military – PPPPPP, which stands for, “Proper preparation prevents piss-poor performance.”“Communication is very important – probably more important than the code you write,” claimed Verburg. “The more you speak in front of large groups of people the easier it gets, but it’s always important to do dry runs, to present to smaller groups. And important to be members of user groups where you can give presentations. It’s a great place to practice speaking skills; to gain new skills; get new contacts, to network.”They encouraged attendees to record themselves and listen to themselves giving a presentation. They advised them to start with a spouse or friends if need be. Learning to communicate to a group, they argued, is essential to being a successful developer. The emphasis here is that software development is a team activity and good, clear, accessible communication is essential to the functioning of software teams. Anti-Pattern Two: Mortgage-Driven Development The main theme here was that, in a period of worldwide recession and economic stagnation, people are concerned about keeping their jobs. So there is a tendency for developers to treat knowledge as power and not share what they know about their systems with their colleagues, so when it comes time to fix a problem in production, they will be the only one who knows how to fix it – and will have made themselves an indispensable cog in a machine so you cannot be fired. So developers avoid documentation at all costs, or if documentation is required, put it on a USB chip and lock it in a lock box. As in the first anti-pattern, the idea here is that communicating well with your colleagues is essential and documentation is a key part of this. Social interactions are essential. Both Verburg and Evans insisted that increasingly, year by year, successful software development is more about communication than the technical aspects of the craft. Developers who understand this are the ones who will have the most success. Anti-Pattern Three: Distracted by Shiny – Always Use the Latest Technology to Stay AheadThe temptation here is to pick out some obscure framework, try a bit of Scala, HTML5, and Clojure, and always use the latest technology and upgrade to the latest point release of everything. Don’t worry if something works poorly because you are ahead of the curve. Verburg and Evans insisted that there need to be sound reasons for everything a developer does. Developers should not bring in something simply because for some reason they just feel like it or because it’s new. They recommended a site run by a developer named Matt Raible with excellent comparison spread sheets regarding Web frameworks and other apps. They praised it as a useful tool to help developers in their decision-making processes. They pointed out that good developers sometimes make bad choices out of boredom, to add shiny things to their CV, out of frustration with existing processes, or just from a lack of understanding. They pointed out that some code may stay in a business system for 15 or 20 years, but not all code is created equal and some may change after 3 or 6 months. Developers need to know where the code they are contributing fits in. What is its likely lifespan? Anti-Pattern Four: Design-Driven Design The anti-pattern: If you want to impress your colleagues and bosses, use design patents left, right, and center – MVC, Session Facades, SOA, etc. Or the UML modeling suite from IBM, back in the day… Generate super fast code. And the more jargon you can talk when in the vicinity of the manager the better.Verburg shared a true story about a time when he was interviewing a guy for a job and asked him what his previous work was. The interviewee said that he essentially took patterns and uses an approved book of Enterprise Architecture Patterns and applied them. Verburg was dumbstruck that someone could have a job in which they took patterns from a book and applied them. He pointed out that the idea that design is a separate activity is simply wrong. He repeated a saying that he uses, “You should pay your junior developers for the lines of code they write and the things they add; you should pay your senior developers for what they take away.”He explained that by encouraging people to take things away, the code base gets simpler and reflects the actual business use cases developers are trying to solve, as opposed to the framework that is being imposed. He told another true story about a project to decommission a very long system. 98% of the code was decommissioned and people got a nice bonus. But the 2% remained on the mainframe so the 98% reduction in code resulted in zero reduction in costs, because the entire mainframe was needed to run the 2% that was left. There is an incentive to get rid of source code and subsystems when they are no longer needed. The session continued with several more anti-patterns that were equally insightful.

    Read the article

  • Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?

    - by zewone
    I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686 ![Schizophrenic Ubuntu](http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000

    Read the article

  • My error with upgrading 4.0 to 4.2- What NOT to do...

    - by Steve Tunstall
    Last week, I was helping a client upgrade from the 2011.1.4.0 code to the newest 2011.1.4.2 code. We downloaded the 4.2 update from MOS, upload and unpacked it on both controllers, and upgraded one of the controllers in the cluster with no issues at all. As this was a brand-new system with no networking or pools made on it yet, there were not any resources to fail back and forth between the controllers. Each controller had it's own, private, management interface (igb0 and igb1) and that's it. So we took controller 1 as the passive controller and upgraded it first. The first controller came back up with no issues and was now on the 4.2 code. Great. We then did a takeover on controller 1, making it the active head (although there were no resources for it to take), and then proceeded to upgrade controller 2. Upon upgrading the second controller, we ran the health check with no issues. We then ran the update and it ran and rebooted normally. However, something strange then happened. It took longer than normal to come back up, and when it did, we got the "cluster controllers on different code" error message that one gets when the two controllers of a cluster are running different code. But we just upgraded the second controller to 4.2, so they should have been the same, right??? Going into the Maintenance-->System screen of controller 2, we saw something very strange. The "current version" was still on 4.0, and the 4.2 code was there but was in the "previous" state with the rollback icon, as if it was the OLDER code and not the newer code. I have never seen this happen before. I would have thought it was a bad 4.2 code file, but it worked just fine with controller 1, so I don't think that was it. Other than the fact the code did not update, there was nothing else going on with this system. It had no yellow lights, no errors in the Problems section, and no errors in any of the logs. It was just out of the box a few hours ago, and didn't even have a storage pool yet. So.... We deleted the 4.2 code, uploaded it from scratch, ran the health check, and ran the upgrade again. once again, it seemed to go great, rebooted, and came back up to the same issue, where it came to 4.0 instead of 4.2. See the picture below.... HERE IS WHERE I MADE A BIG MISTAKE.... I SHOULD have instantly called support and opened a Sev 2 ticket. They could have done a shared shell and gotten the correct Fishwork engineer to look at the files and the code and determine what file was messed up and fixed it. The system was up and working just fine, it was just on an older code version, not really a huge problem at all. Instead, I went ahead and clicked the "Rollback" icon, thinking that the system would rollback to the 4.2 code.   Ouch... What happened was that the system said, "Fine, I will delete the 4.0 code and boot to your 4.2 code"... Which was stupid on my part because something was wrong with the 4.2 code file here and the 4.0 was just fine.  So now the system could not boot at all, and the 4.0 code was completely missing from the system, and even a high-level Fishworks engineer could not help us. I had messed it up good. We could only get to the ILOM, and I had to re-image the system from scratch using a hard-to-get-and-use FishStick USB drive. These are tightly controlled and difficult to get, almost always handcuffed to an engineer who will drive out to re-image a system. This took another day of my client's time.  So.... If you see a "previous version" of your system code which is actually a version higher than the current version... DO NOT ROLL IT BACK.... It did not upgrade for a very good reason. In my case, after the system was re-imaged to a code level just 3 back, we once again tried the same 4.2 code update and it worked perfectly the first time and is now great and stable.  Lesson learned.  By the way, our buddy Ryan Matthews wanted to point out the best practice and supported way of performing an upgrade of an active/active ZFSSA, where both controllers are doing some of the work. These steps would not have helpped me for the above issue, but it's important to follow the correct proceedure when doing an upgrade. 1) Upload software to both controllers and wait for it to unpack 2) On controller "A" navigate to configuration/cluster and click "takeover" 3) Wait for controller "B" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 4) Wait for controller "B" to apply the update and finish rebooting 5) Login to controller "B", navigate to configuration/cluster and click "takeover" 6) Wait for controller "A" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 7) Wait for controller "A" to apply the update and finish rebooting 8) Login to controller "B", navigate to configuration/cluster and click "failback"

    Read the article

  • My Feelings About Microsoft Surface

    - by Valter Minute
    Advice: read the title carefully, I’m talking about “feelings” and not about advanced technical points proved in a scientific and objective way I still haven’t had a chance to play with a MS Surface tablet (I would love to, of course) and so my ideas just came from reading different articles on the net and MS official statements. Remember also that the MVP motto begins with “Independent” (“Independent Experts. Real World Answers.”) and this is just my humble opinion about a product and a technology. I know that, being an MS MVP you can be called an “MS-fanboy”, I don’t care, I hope that people can appreciate my opinion, even if it doesn’t match theirs. The “Surface” brand can be confusing for techies that knew the “original” surface concept but I think that will be a fresh new brand name for most of the people out there. But marketing department are here to confuse people… so I can understand this “recycle” of an existing name. So Microsoft is entering the hardware arena… for me this is good news. Microsoft developed some nice hardware in the past: the xbox, zune (even if the commercial success was quite limited) and, last but not least, the two arc mices (old and new model) that I use and appreciate. In the past Microsoft worked with OEMs and that model lead to good and bad things. Good thing (for microsoft, at least) is market domination by windows-based PCs that only in the last years has been reduced by the return of the Mac and tablets. Google is also moving in the hardware business with its acquisition of Motorola, and Apple leveraged his control of both the hardware and software sides to develop innovative products. Microsoft can scare OEMs and make them fly away from windows (but where?) or just lead the pack, showing how devices should be designed to compete in the market and bring back some of the innovation that disappeared from recent PC products (look at the shelves of your favorite electronics store and try to distinguish a laptop between the huge mass of anonymous PCs on displays… only Macs shine out there…). Having to compete with MS “official” hardware will force OEMs to develop better product and bring back some real competition in a market that was ruled only by prices (the lower the better even when that means low quality) and no innovative features at all (when it was the last time that a new PC surprised you?). Moving into a new market is a big and risky move, but with Windows 8 Microsoft is playing a crucial move for its future, trying to be back in the innovation run against apple and google. MS can’t afford to fail this time. I saw the new devices (the WinRT and Pro) and the specifications are scarce, misleading and confusing. The first impression is that the device looks like an iPad with a nice keyboard cover… Using “HD” and “full HD” to define display resolution instead of using the real figures and reviving the “ClearType” brand (now dead on Win8 as reported here and missed by people who hate to read text on displays, like myself) without providing clear figures (couldn’t you count those damned pixels?) seems to imply that MS was caught by surprise by apple recent “retina” displays that brought very high definition screens on tablets.Also there are no specifications about the processors used (even if some sources report NVidia Tegra for the ARM tablet and i5 for the x86 one) and expected battery life (a critical point for tablets and the point that killed Windows7 x86 based tablets). Also nothing about the price, and this will be another critical point because other platform out there already provide lots of applications and have a good user base, if MS want to enter this market tablets pricing must be competitive. There are some expansion ports (SD and USB), so no fixed storage model (even if the specs talks about 32-64GB for RT and 128-256GB for pro). I like this and don’t like the apple model where flash memory (that it’s dirt cheap used in thumdrives or SD cards) is as expensive as gold (or cocaine to have a more accurate per gram measurement) when mounted inside a tablet/phone. For big files you’ll be able to use external media and an SD card could be used to store files that don’t require super-fast SSD-like access times, I hope. To be honest I really don’t like the marketplace model and the limitation of Windows RT APIs (no local database? from a company that based a good share of its success on VB6+Access!) and lack of desktop support on the ARM (even if the support is here and has been used to port office). It’s a step toward the consumer market (where competitors are making big money), but may impact enterprise (and embedded) users that may not appreciate Windows 8 new UI or the limitations of the new app model (if you aren’t connected you are dead ). Not having compatibility with the desktop will require brand new applications and honestly made all the CPU cycles spent to convert .NET IL into real machine code in the past like a huge waste of time… as soon as a new processor architecture is supported by Windows you still have to rewrite part of your application (and MS is pushing HTML5+JS and native code more than .NET in my perception). On the other side I believe that the development experience provided by Visual Studio is still miles (or kilometres) ahead of the competition and even the all-uppercase menu of VS2012 hasn’t changed this situation. The new metro UI got mixed reviews. On my side I should say that is very pleasant to use on a touch screen, I like the minimalist design (even if sometimes is too minimal and hides stuff that, in my opinion, should be visible) but I should also say that using it with mouse and keyboard is like trying to pick your nose with boxing gloves… Metro is also very interesting for embedded devices where touch screen usage is quite common and where having an application taking all the screen is the norm. For devices like kiosks, vending machines etc. this kind of UI can be a great selling point. I don’t need a new tablet (to be honest I’m pretty happy with my wife’s iPad and with my PC), but I may change my opinion after having a chance to play a little bit with those new devices and understand what’s hidden under all this mysterious and generic announcements and specifications!

    Read the article

  • Mounting ddrescue image after recovery (in over my head)

    - by BorgDomination
    I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

    Read the article

  • Windows 8/Surface Lunch Event Summary

    - by Tim Murphy
    Today was a big day for Microsoft with two separate launch event.  The first for Windows 8 and all of it’s hardware partners.  The second was specifically to introduce the Microsoft Windows 8 Surface tablet.  Below are some of the take-aways I got from the webcasts. Windows 8 Launch The three general area that Microsoft focused on were the release of the OS itself, the public unveiling of the Windows Store and the new devices available from its hardware partners. The release of the OS focused on the fact that it will be available at mid-night tonight for both new PCs and for upgrades.  I can’t say that this interested me that much since it was already known to most people.  I think what they did show well was how easy the OS really is to use. The Windows Store is also not a new feature to those of us who have been running the pre-release versions of Windows 8 or have owned Windows Phone 7 for the past 2 years.  What was interesting is that the Windows Store launches with more apps available than any other platforms store at their respective launch.  I think this says a lot about how Microsoft focuses on the ability of developers to create software and make it available.  The of course were sure to emphasize that the Windows Store has better monetary terms for developers than its competitors. The also showed off the fact that XBox Music streaming is available for to all Windows 8 user for free.  Couple this with the Bing suite of apps that give you news, weather, sports and finance right out of the box and I think most people will find the environment a joy to use. I think the hardware demo, while quick and furious, really show where Windows shine: CHOICE!  They made a statement that over 1000 devices have been certified for Windows 8.  They showed tablets, laptops, desktops, all-in-ones and convertibles.  Since these devices have industry standard connectors they give a much wider variety of accessories and devices that you can use with them. Steve Balmer then came on stage and tried to see how many times he could use the “magical”.  He focused on how the Windows 8 OS is designed to integrate with SkyDrive, Skype and Outlook.com.  He also enforced that they think Windows 8 is the best choice for the Enterprise when it comes to protecting data and integrating across devices including Windows Phone 8. With that we were left to wait for the second event of the day. Surface Launch The second event of the day started with kids with magnets.  Ok, they were adults, but who doesn’t like playing with magnets.  Steven Sinofsky detached and reattached the Surface keyboard repeatedly, clearly enjoying himself.  It turns out that there are 4 magnets in the cover, 2 for alignment and 2 as connectors. They then went to giving us the details on the display.  The 10.6” display is optically bonded to the case and is optimized to reduce glare.  I think this came through very well in the demonstrations. The properties of the case were also a great selling point.  The VaporMg allowed them to drop the device on stage, on purpose, and continue working.  Of course they had to bring out the skate boards made from Surface devices. “It just has to feel right” was the reason they gave for many of their design decisions from the weight and size of the device to the way the kickstand and camera work together.  While this gave you the feeling that the whole process was trial and error you could tell that a lot of science went into the specs.  This included making sure that the magnets were strong enough to hold the cover on and still have a 3 year old remove the cover without effort. I am glad that they also decided the a USB port would be part of the spec since it give so many options.  They made the point that this allows Surface to leverage over 420 million existing devices.  That works for me. The last feature that I really thought was important was the microSD port.  Begin stuck with the onboard memory has been an aggravation of mine with many of the devices in the market today. I think they did job of really getting the audience to understand why you want this platform and this particular device.  Using personal examples like creating a video of a birthday party and being in it or the fact that the device was being used to live blog the event and control the lights and presentation.  They showed very well that it was not only fun but very capable of getting real work done.  Handing out tablets to the crowd didn’t hurt either.  In the end I really wanted a Surface even though I really have no need for one on a daily basis.  Great job Microsoft! del.icio.us Tags: Windows 8,Win8,Windows 8 Luanch

    Read the article

  • Can ping device from one computer and not the other

    - by Sean Duggan
    I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

    Read the article

  • CLSF & CLK 2013 Trip Report by Jeff Liu

    - by jamesmorris
    This is a contributed post from Jeff Liu, lead XFS developer for the Oracle mainline Linux kernel team. Recently, I attended both the China Linux Storage and Filesystem workshop (CLSF), and the China Linux Kernel conference (CLK), which were held in Shanghai. Here are the highlights for both events. CLSF - 17th October XFS update (led by Jeff Liu) XFS keeps rapid progress with a lot of changes, especially focused on the infrastructure/performance improvements as well as  new feature development.  This can be reflected with a sample statistics among XFS/Ext4+JBD2/Btrfs via: # git diff --stat --minimal -C -M v3.7..v3.12-rc4 -- fs/xfs|fs/ext4+fs/jbd2|fs/btrfs XFS: 141 files changed, 27598 insertions(+), 19113 deletions(-) Ext4+JBD2: 39 files changed, 10487 insertions(+), 5454 deletions(-) Btrfs: 70 files changed, 19875 insertions(+), 8130 deletions(-) What made up those changes in XFS? Self-describing metadata(CRC32c). This is a new feature and it contributed about 70% code changes, it can be enabled via `mkfs.xfs -m crc=1 /dev/xxx` for v5 superblock. Transaction log space reservation improvements. With this change, we can calculate the log space reservation at mount time rather than runtime to reduce the the CPU overhead. User namespace support. So both XFS and USERNS can be enabled on kernel configuration begin from Linux 3.10. Thanks Dwight Engen's efforts for this thing. Split project/group quota inodes. Originally, project quota can not be enabled with group quota at the same time because they were share the same quota file inode, now it works but only for v5 super block. i.e, CRC enabled. CONFIG_XFS_WARN, an new lightweight runtime debugger which can be deployed in production environment. Readahead log object recovery, this change can speed up the log replay progress significantly. Speculative preallocation inode tracking, clearing and throttling. The main purpose is to deal with inodes with post-EOF space due to speculative preallocation, support improved quota management to free up a significant amount of unwritten space when at or near EDQUOT. It support backgroup scanning which occurs on a longish interval(5 mins by default, tunable), and on-demand scanning/trimming via ioctl(2). Bitter arguments ensued from this session, especially for the comparison between Ext4 and Btrfs in different areas, I have to spent a whole morning of the 1st day answering those questions. We basically agreed on XFS is the best choice in Linux nowadays because: Stable, XFS has a good record in stability in the past 10 years. Fengguang Wu who lead the 0-day kernel test project also said that he has observed less error than other filesystems in the past 1+ years, I own it to the XFS upstream code reviewer, they always performing serious code review as well as testing. Good performance for large/small files, XFS does not works very well for small files has already been an old story for years. Best choice (maybe) for distributed PB filesystems. e.g, Ceph recommends delopy OSD daemon on XFS because Ext4 has limited xattr size. Best choice for large storage (>16TB). Ext4 does not support a single file more than around 15.95TB. Scalability, any objection to XFS is best in this point? :) XFS is better to deal with transaction concurrency than Ext4, why? The maximum size of the log in XFS is 2038MB compare to 128MB in Ext4. Misc. Ext4 is widely used and it has been proved fast/stable in various loads and scenarios, XFS just need more customers, and Btrfs is still on the road to be a manhood. Ceph Introduction (Led by Li Wang) This a hot topic.  Li gave us a nice introduction about the design as well as their current works. Actually, Ceph client has been included in Linux kernel since 2.6.34 and supported by Openstack since Folsom but it seems that it has not yet been widely deployment in production environment. Their major work is focus on the inline data support to separate the metadata and data storage, reduce the file access time, i.e, a file access need communication twice, fetch the metadata from MDS and then get data from OSD, and also, the small file access is limited by the network latency. The solution is, for the small files they would like to store the data at metadata so that when accessing a small file, the metadata server can push both metadata and data to the client at the same time. In this way, they can reduce the overhead of calculating the data offset and save the communication to OSD. For this feature, they have only run some small scale testing but really saw noticeable improvements. Test environment: Intel 2 CPU 12 Core, 64GB RAM, Ubuntu 12.04, Ceph 0.56.6 with 200GB SATA disk, 15 OSD, 1 MDS, 1 MON. The sequence read performance for 1K size files improved about 50%. I have asked Li and Zheng Yan (the core developer of Ceph, who also worked on Btrfs) whether Ceph is really stable and can be deployed at production environment for large scale PB level storage, but they can not give a positive answer, looks Ceph even does not spread over Dreamhost (subject to confirmation). From Li, they only deployed Ceph for a small scale storage(32 nodes) although they'd like to try 6000 nodes in the future. Improve Linux swap for Flash storage (led by Shaohua Li) Because of high density, low power and low price, flash storage (SSD) is a good candidate to partially replace DRAM. A quick answer for this is using SSD as swap. But Linux swap is designed for slow hard disk storage, so there are a lot of challenges to efficiently use SSD for swap. SWAPOUT swap_map scan swap_map is the in-memory data structure to track swap disk usage, but it is a slow linear scan. It will become a bottleneck while finding many adjacent pages in the use of SSD. Shaohua Li have changed it to a cluster(128K) list, resulting in O(1) algorithm. However, this apporoach needs restrictive cluster alignment and only enabled for SSD. IO pattern In most cases, the swap io is in interleaved pattern because of mutiple reclaimers or a free cluster is shared by all reclaimers. Even though block layer can merge interleaved IO to some extent, but we cannot count on it completely. Hence the per-cpu cluster is added base on the previous change, it can help reclaimer do sequential IO and the block layer will be easier to merge IO. TLB flush: If we're reclaiming one active page, we should first move the page from active lru list to inactive lru list, and then reclaim the page from inactive lru to swap it out. During the process, we need to clear PTE twice: first is 'A'(ACCESS) bit, second is 'P'(PRESENT) bit. Processors need to send lots of ipi which make the TLB flush really expensive. Some works have been done to improve this, including rework smp_call_functiom_many() or remove the first TLB flush in x86, but there still have some arguments here and only parts of works have been pushed to mainline. SWAPIN: Page fault does iodepth=1 sync io, but it's a little waste if only issue a page size's IO. The obvious solution is doing swap readahead. But the current in-kernel swap readahead is arbitary(always 8 pages), and it always doesn't perform well for both random and sequential access workload. Shaohua introduced a new flag for madvise(MADV_WILLNEED) to do swap prefetch, so the changes happen in userspace API and leave the in-kernel readahead unchanged(but I think some improvement can also be done here). SWAP discard As we know, discard is important for SSD write throughout, but the current swap discard implementation is synchronous. He changed it to async discard which allow discard and write run in the same time. Meanwhile, the unit of discard is also optimized to cluster. Misc: lock contention For many concurrent swapout and swapin , the lock contention such as anon_vma or swap_lock is high, so he changed the swap_lock to a per-swap lock. But there still have some lock contention in very high speed SSD because of swapcache address_space lock. Zproject (led by Bob Liu) Bob gave us a very nice introduction about the current memory compression status. Now there are 3 projects(zswap/zram/zcache) which all aim at smooth swap IO storm and promote performance, but they all have their own pros and cons. ZSWAP It is implemented based on frontswap API and it uses a dynamic allocater named Zbud to allocate free pages. Zbud means pairs of zpages are "buddied" and it can only store at most two compressed pages in one page frame, so the max compress ratio is 50%. Each page frame is lru-linked and can do shink in memory pressure. If the compressed memory pool reach its limitation, shink or reclaim happens. It decompress the page frame into two new allocated pages and then write them to real swap device, but it can fail when allocating the two pages. ZRAM Acts as a compressed ramdisk and used as swap device, and it use zsmalloc as its allocator which has high density but may have fragmentation issues. Besides, page reclaim is hard since it will need more pages to uncompress and free just one page. ZRAM is preferred by embedded system which may not have any real swap device. Now both ZRAM and ZSWAP are in driver/staging tree, and in the mm community there are some disscussions of merging ZRAM into ZSWAP or viceversa, but no agreement yet. ZCACHE Handles file page compression but it is removed out of staging recently. From industry (led by Tang Jie, LSI) An LSI engineer introduced several new produces to us. The first is raid5/6 cards that it use full stripe writes to improve performance. The 2nd one he introduced is SandForce flash controller, who can understand data file types (data entropy) to reduce write amplification (WA) for nearly all writes. It's called DuraWrite and typical WA is 0.5. What's more, if enable its Dynamic Logical Capacity function module, the controller can do data compression which is transparent to upper layer. LSI testing shows that with this virtual capacity enables 1x TB drive can support up to 2x TB capacity, but the application must monitor free flash space to maintain optimal performance and to guard against free flash space exhaustion. He said the most useful application is for datebase. Another thing I think it's worth to mention is that a NV-DRAM memory in NMR/Raptor which is directly exposed to host system. Applications can directly access the NV-DRAM via a memory address - using standard system call mmap(). He said that it is very useful for database logging now. This kind of NVM produces are beginning to appear in recent years, and it is said that Samsung is building a research center in China for related produces. IMHO, NVM will bring an effect to current os layer especially on file system, e.g. its journaling may need to redesign to fully utilize these nonvolatile memory. OCFS2 (led by Canquan Shen) Without a doubt, HuaWei is the biggest contributor to OCFS2 in the past two years. They have posted 46 upstream patches and 39 patches have been merged. Their current project is based on 32/64 nodes cluster, but they also tried 128 nodes at the experimental stage. The major work they are working is to support ATS (atomic test and set), it can be works with DLM at the same time. Looks this idea is inspired by the vmware VMFS locking, i.e, http://blogs.vmware.com/vsphere/2012/05/vmfs-locking-uncovered.html CLK - 18th October 2013 Improving Linux Development with Better Tools (Andi Kleen) This talk focused on how to find/solve bugs along with the Linux complexity growing. Generally, we can do this with the following kind of tools: Static code checkers tools. e.g, sparse, smatch, coccinelle, clang checker, checkpatch, gcc -W/LTO, stanse. This can help check a lot of things, simple mistakes, complex problems, but the challenges are: some are very slow, false positives, may need a concentrated effort to get false positives down. Especially, no static checker I found can follow indirect calls (“OO in C”, common in kernel): struct foo_ops { int (*do_foo)(struct foo *obj); } foo->do_foo(foo); Dynamic runtime checkers, e.g, thread checkers, kmemcheck, lockdep. Ideally all kernel code would come with a test suite, then someone could run all the dynamic checkers. Fuzzers/test suites. e.g, Trinity is a great tool, it finds many bugs, but needs manual model for each syscall. Modern fuzzers around using automatic feedback, but notfor kernel yet: http://taviso.decsystem.org/making_software_dumber.pdf Debuggers/Tracers to understand code, e.g, ftrace, can dump on events/oops/custom triggers, but still too much overhead in many cases to run always during debug. Tools to read/understand source, e.g, grep/cscope work great for many cases, but do not understand indirect pointers (OO in C model used in kernel), give us all “do_foo” instances: struct foo_ops { int (*do_foo)(struct foo *obj); } = { .do_foo = my_foo }; foo>do_foo(foo); That would be great to have a cscope like tool that understands this based on types/initializers XFS: The High Performance Enterprise File System (Jeff Liu) [slides] I gave a talk for introducing the disk layout, unique features, as well as the recent changes.   The slides include some charts to reflect the performances between XFS/Btrfs/Ext4 for small files. About a dozen users raised their hands when I asking who has experienced with XFS. I remembered that when I asked the same question in LinuxCon/Japan, only 3 people raised their hands, but they are Chris Mason, Ric Wheeler, and another attendee. The attendee questions were mainly focused on stability, and comparison with other file systems. Linux Containers (Feng Gao) The speaker introduced us that the purpose for those kind of namespaces, include mount/UTS/IPC/Network/Pid/User, as well as the system API/ABI. For the userspace tools, He mainly focus on the Libvirt LXC rather than us(LXC). Libvirt LXC is another userspace container management tool, implemented as one type of libvirt driver, it can manage containers, create namespace, create private filesystem layout for container, Create devices for container and setup resources controller via cgroup. In this talk, Feng also mentioned another two possible new namespaces in the future, the 1st is the audit, but not sure if it should be assigned to user namespace or not. Another is about syslog, but the question is do we really need it? In-memory Compression (Bob Liu) Same as CLSF, a nice introduction that I have already mentioned above. Misc There were some other talks related to ACPI based memory hotplug, smart wake-affinity in scheduler etc., but my head is not big enough to record all those things. -- Jeff Liu

    Read the article

  • Partitioned Repository for WebCenter Content using Oracle Database 11g

    - by Adao Junior
    One of the biggest challenges for content management solutions is related to the storage management due the high volumes of the unstoppable growing of information. Even if you have storage appliances and a lot of terabytes, thinks like backup, compression, deduplication, storage relocation, encryption, availability could be a nightmare. One standard option that you have with the Oracle WebCenter Content is to store data to the database. And the Oracle Database allows you leverage features like compression, deduplication, encryption and seamless backup. But with a huge volume, the challenge is passed to the DBA to keep the WebCenter Content Database up and running. One solution is the use of DB partitions for your content repository, but what are the implications of this? Can I fit this with my business requirements? Well, yes. It’s up to you how you will manage that, you just need a good plan. During you “storage brainstorm plan” take in your mind what you need, such as storage petabytes of documents? You need everything on-line? There’s a way to logically separate the “good content” from the “legacy content”? The first thing that comes to my mind is to use the creation date of the document, but you need to remember that this document could receive a lot of revisions and maybe you can consider the revision creation date. Your plan can have also complex rules like per Document Type or per a custom metadata like department or an hybrid per date, per DocType and an specific virtual folder. Extrapolation the use, you can have your repository distributed in different servers, different disks, different disk types (Such as ssds, sas, sata, tape,…), separated accordingly your business requirements, separating the “hot” content from the legacy and easily matching your compliance requirements. If you think to use by revision, the simple way is to consider the dId, that is the sequential unique id for every content created using the WebCenter Content or the dLastModified that is the date field of the FileStorage table that contains the date of inclusion of the content to the DB Table using SecureFiles. Using the scenario of partitioned repository using an hierarchical separation by date, we will transform the FileStorage table in an partitioned table using  “Partition by Range” of the dLastModified column (You can use the dId or a join with other tables for other metadata such as dDocType, Security, etc…). The test scenario bellow covers: Previous existent data on the JDBC Storage to be migrated to the new partitioned JDBC Storage Partition by Date Automatically generation of new partitions based on a pre-defined interval (Available only with Oracle Database 11g+) Deduplication and Compression for legacy data Oracle WebCenter Content 11g PS5 (Could present some customizations that do not affect the test scenario) For the test case you need some data stored using JDBC Storage to be the “legacy” data. If you do not have done before, just create an Storage rule pointed to the JDBC Storage: Enable the metadata StorageRule in the UI and upload some documents using this rule. For this test case you can run using the schema owner or an dba user. We will use the schema owner TESTS_OCS. I can’t forgot to tell that this is just a test and you should do a proper backup of your environment. When you use the schema owner, you need some privileges, using the dba user grant the privileges needed: REM Grant privileges required for online redefinition. GRANT EXECUTE ON DBMS_REDEFINITION TO TESTS_OCS; GRANT ALTER ANY TABLE TO TESTS_OCS; GRANT DROP ANY TABLE TO TESTS_OCS; GRANT LOCK ANY TABLE TO TESTS_OCS; GRANT CREATE ANY TABLE TO TESTS_OCS; GRANT SELECT ANY TABLE TO TESTS_OCS; REM Privileges required to perform cloning of dependent objects. GRANT CREATE ANY TRIGGER TO TESTS_OCS; GRANT CREATE ANY INDEX TO TESTS_OCS; In our test scenario we will separate the content as Legacy, Day1, Day2, Day3 and Future. This last one will partitioned automatically using 3 tablespaces in a round robin mode. In a real scenario the partition rule could be per month, per year or any rule that you choose. Table spaces for the test scenario: CREATE TABLESPACE TESTS_OCS_PART_LEGACY DATAFILE 'tests_ocs_part_legacy.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY1 DATAFILE 'tests_ocs_part_day1.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY2 DATAFILE 'tests_ocs_part_day2.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY3 DATAFILE 'tests_ocs_part_day3.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_A 'tests_ocs_part_round_robin_a.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_B 'tests_ocs_part_round_robin_b.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_C 'tests_ocs_part_round_robin_c.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; Before start, gather optimizer statistics on the actual FileStorage table: EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'FileStorage', cascade => TRUE); Now check if is possible execute the redefinition process: EXEC DBMS_REDEFINITION.CAN_REDEF_TABLE('TESTS_OCS', 'FileStorage',DBMS_REDEFINITION.CONS_USE_PK); If no errors messages, you are good to go. Create a Partitioned Interim FileStorage table. You need to create a new table with the partition information to act as an interim table: CREATE TABLE FILESTORAGE_Part ( DID NUMBER(*,0) NOT NULL ENABLE, DRENDITIONID VARCHAR2(30 CHAR) NOT NULL ENABLE, DLASTMODIFIED TIMESTAMP (6), DFILESIZE NUMBER(*,0), DISDELETED VARCHAR2(1 CHAR), BFILEDATA BLOB ) LOB (BFILEDATA) STORE AS SECUREFILE ( ENABLE STORAGE IN ROW NOCACHE LOGGING KEEP_DUPLICATES NOCOMPRESS ) PARTITION BY RANGE (DLASTMODIFIED) INTERVAL (NUMTODSINTERVAL(1,'DAY')) STORE IN (TESTS_OCS_PART_ROUND_ROBIN_A, TESTS_OCS_PART_ROUND_ROBIN_B, TESTS_OCS_PART_ROUND_ROBIN_C) ( PARTITION FILESTORAGE_PART_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_LEGACY LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_LEGACY RETENTION NONE DEDUPLICATE COMPRESS HIGH ), PARTITION FILESTORAGE_PART_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY1 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY1 RETENTION AUTO KEEP_DUPLICATES COMPRESS ), PARTITION FILESTORAGE_PART_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY2 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY2 RETENTION AUTO KEEP_DUPLICATES NOCOMPRESS ), PARTITION FILESTORAGE_PART_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY3 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY3 RETENTION AUTO KEEP_DUPLICATES NOCOMPRESS ) ); After the creation you should see your partitions defined. Note that only the fixed range partitions have been created, none of the interval partition have been created. Start the redefinition process: BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'TESTS_OCS' ,orig_table => 'FileStorage' ,int_table => 'FileStorage_PART' ,col_mapping => NULL ,options_flag => DBMS_REDEFINITION.CONS_USE_PK ); END; This operation can take some time to complete, depending how many contents that you have and on the size of the table. Using the DBA user you can check the progress with this command: SELECT * FROM v$sesstat WHERE sid = 1; Copy dependent objects: DECLARE redefinition_errors PLS_INTEGER := 0; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'TESTS_OCS' ,orig_table => 'FileStorage' ,int_table => 'FileStorage_PART' ,copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS ,copy_triggers => TRUE ,copy_constraints => TRUE ,copy_privileges => TRUE ,ignore_errors => TRUE ,num_errors => redefinition_errors ,copy_statistics => FALSE ,copy_mvlog => FALSE ); IF (redefinition_errors > 0) THEN DBMS_OUTPUT.PUT_LINE('>>> FileStorage to FileStorage_PART temp copy Errors: ' || TO_CHAR(redefinition_errors)); END IF; END; With the DBA user, verify that there's no errors: SELECT object_name, base_table_name, ddl_txt FROM DBA_REDEFINITION_ERRORS; *Note that will show 2 lines related to the constrains, this is expected. Synchronize the interim table FileStorage_PART: BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'TESTS_OCS', orig_table => 'FileStorage', int_table => 'FileStorage_PART'); END; Gather statistics on the new table: EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'FileStorage_PART', cascade => TRUE); Complete the redefinition: BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'TESTS_OCS', orig_table => 'FileStorage', int_table => 'FileStorage_PART'); END; During the execution the FileStorage table is locked in exclusive mode until finish the operation. After the last command the FileStorage table is partitioned. If you have contents out of the range partition, you should see the new partitions created automatically, not generating an error if you “forgot” to create all the future ranges. You will see something like: You now can drop the FileStorage_PART table: border-bottom-width: 1px; border-bottom-style: solid; text-align: left; border-left-color: silver; border-left-width: 1px; border-left-style: solid; padding-bottom: 4px; line-height: 12pt; background-color: #f4f4f4; margin-top: 20px; margin-right: 0px; margin-bottom: 10px; margin-left: 0px; padding-left: 4px; width: 97.5%; padding-right: 4px; font-family: 'Courier New', Courier, monospace; direction: ltr; max-height: 200px; font-size: 8pt; overflow-x: auto; overflow-y: auto; border-top-color: silver; border-top-width: 1px; border-top-style: solid; cursor: text; border-right-color: silver; border-right-width: 1px; border-right-style: solid; padding-top: 4px; " id="codeSnippetWrapper"> DROP TABLE FileStorage_PART PURGE; To check the FileStorage table is valid and is partitioned, use the command: SELECT num_rows,partitioned FROM user_tables WHERE table_name = 'FILESTORAGE'; You can list the contents of the FileStorage table in a specific partition, per example: SELECT * FROM FileStorage PARTITION (FILESTORAGE_PART_LEGACY) Some useful commands that you can use to check the partitions, note that you need to run using a DBA user: SELECT * FROM DBA_TAB_PARTITIONS WHERE table_name = 'FILESTORAGE';   SELECT * FROM DBA_TABLESPACES WHERE tablespace_name like 'TESTS_OCS%'; After the redefinition process complete you have a new FileStorage table storing all content that has the Storage rule pointed to the JDBC Storage and partitioned using the rule set during the creation of the temporary interim FileStorage_PART table. At this point you can test the WebCenter Content downloading the documents (Original and Renditions). Note that the content could be already in the cache area, take a look in the weblayout directory to see if a file with the same id is there, then click on the web rendition of your test file and see if have created the file and you can open, this means that is all working. The redefinition process can be repeated many times, this allow you test what the better layout, over and over again. Now some interesting maintenance actions related to the partitions: Make an tablespace read only. No issues viewing, the WebCenter Content do not alter the revisions When try to delete an content that is part of an read only tablespace, an error will occurs and the document will not be deleted The only way to prevent errors today is creating an custom component that checks the partitions and if you have an document in an “Read Only” repository, execute the deletion process of the metadata and mark the document to be deleted on the next db maintenance, like a new redefinition. Take an tablespace off-line for archiving purposes or any other reason. When you try open an document that is included in this tablespace will receive an error that was unable to retrieve the content, but the others online tablespaces are not affected. Same behavior when deleting documents. Again, an custom component is the solution. If you have an document “out of range”, the component can show an message that the repository for that document is offline. This can be extended to a option to the user to request to put online again. Moving some legacy content to an offline repository (table) using the Exchange option to move the content from one partition to a empty nonpartitioned table like FileStorage_LEGACY. Note that this option will remove the registers from the FileStorage and will not be able to open the stored content. You always need to keep in mind the indexes and constrains. An redefinition separating the original content (vault) from the renditions and separate by date ate the same time. This could be an option for DAM environments that want to have an special place for the renditions and put the original files in a storage with less performance. The process will be the same, you just need to change the script of the interim table to use composite partitioning. Will be something like: CREATE TABLE FILESTORAGE_RenditionPart ( DID NUMBER(*,0) NOT NULL ENABLE, DRENDITIONID VARCHAR2(30 CHAR) NOT NULL ENABLE, DLASTMODIFIED TIMESTAMP (6), DFILESIZE NUMBER(*,0), DISDELETED VARCHAR2(1 CHAR), BFILEDATA BLOB ) LOB (BFILEDATA) STORE AS SECUREFILE ( ENABLE STORAGE IN ROW NOCACHE LOGGING KEEP_DUPLICATES NOCOMPRESS ) PARTITION BY LIST (DRENDITIONID) SUBPARTITION BY RANGE (DLASTMODIFIED) ( PARTITION Vault VALUES ('primaryFile') ( SUBPARTITION FILESTORAGE_VAULT_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_FUTURE VALUES LESS THAN (MAXVALUE) ) ,PARTITION WebLayout VALUES ('webViewableFile') ( SUBPARTITION FILESTORAGE_WEBLAYOUT_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_FUTURE VALUES LESS THAN (MAXVALUE) ) ,PARTITION Special VALUES ('Special') ( SUBPARTITION FILESTORAGE_SPECIAL_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_FUTURE VALUES LESS THAN (MAXVALUE) ) )ENABLE ROW MOVEMENT; The next post related to partitioned repository will come with an sample component to handle the possible exceptions when you need to take off line an tablespace/partition or move to another place. Also, we can include some integration to the Retention Management and Records Management. Another subject related to partitioning is the ability to create an FileStore Provider pointed to a different database, raising the level of the distributed storage vs. performance. Let us know if this is important to you or you have an use case not listed, leave a comment. Cross-posted on the blog.ContentrA.com

    Read the article

  • Oracle Solaris: Zones on Shared Storage

    - by Jeff Victor
    Oracle Solaris 11.1 has several new features. At oracle.com you can find a detailed list. One of the significant new features, and the most significant new feature releated to Oracle Solaris Zones, is casually called "Zones on Shared Storage" or simply ZOSS (rhymes with "moss"). ZOSS offers much more flexibility because you can store Solaris Zones on shared storage (surprise!) so that you can perform quick and easy migration of a zone from one system to another. This blog entry describes and demonstrates the use of ZOSS. ZOSS provides complete support for a Solaris Zone that is stored on "shared storage." In this case, "shared storage" refers to fiber channel (FC) or iSCSI devices, although there is one lone exception that I will demonstrate soon. The primary intent is to enable you to store a zone on FC or iSCSI storage so that it can be migrated from one host computer to another much more easily and safely than in the past. With this blog entry, I wanted to make it easy for you to try this yourself. I couldn't assume that you have a SAN available - which is a good thing, because neither do I! What could I use, instead? [There he goes, foreshadowing again... -Ed.] Developing this entry reinforced the lesson that the solution to every lab problem is VirtualBox. Oracle VM VirtualBox (its formal name) helps here in a couple of important ways. It offers the ability to easily install multiple copies of Solaris as guests on top of any popular system (Microsoft Windows, MacOS, Solaris, Oracle Linux (and other Linuxes) etc.). It also offers the ability to create a separate virtual disk drive (VDI) that appears as a local hard disk to a guest. This virtual disk can be moved very easily from one guest to another. In other words, you can follow the steps below on a laptop or larger x86 system. Please note that the ability to use ZOSS to store a zone on a local disk is very useful for a lab environment, but not so useful for production. I do not suggest regularly moving disk drives among computers. In the method I describe below, that virtual hard disk will contain the zone that will be migrated among the (virtual) hosts. In production, you would use FC or iSCSI LUNs instead. The zonecfg(1M) man page details the syntax for each of the three types of devices. Why Migrate? Why is the migration of virtual servers important? Some of the most common reasons are: Moving a workload to a different computer so that the original computer can be turned off for extensive maintenance. Moving a workload to a larger system because the workload has outgrown its original system. If the workload runs in an environment (such as a Solaris Zone) that is stored on shared storage, you can restore the service of the workload on an alternate computer if the original computer has failed and will not reboot. You can simplify lifecycle management of a workload by developing it on a laptop, migrating it to a test platform when it's ready, and finally moving it to a production system. Concepts For ZOSS, the important new concept is named "rootzpool". You can read about it in the zonecfg(1M) man page, but here's the short version: it's the backing store (hard disk(s), or LUN(s)) that will be used to make a ZFS zpool - the zpool that will hold the zone. This zpool: contains the zone's Solaris content, i.e. the root file system does not contain any content not related to the zone can only be mounted by one Solaris instance at a time Method Overview Here is a brief list of the steps to create a zone on shared storage and migrate it. The next section shows the commands and output. You will need a host system with an x86 CPU (hopefully at least a couple of CPU cores), at least 2GB of RAM, and at least 25GB of free disk space. (The steps below will not actually use 25GB of disk space, but I don't want to lead you down a path that ends in a big sign that says "Your HDD is full. Good luck!") Configure the zone on both systems, specifying the rootzpool that both will use. The best way is to configure it on one system and then copy the output of "zonecfg export" to the other system to be used as input to zonecfg. This method reduces the chances of pilot error. (It is not necessary to configure the zone on both systems before creating it. You can configure this zone in multiple places, whenever you want, and migrate it to one of those places at any time - as long as those systems all have access to the shared storage.) Install the zone on one system, onto shared storage. Boot the zone. Provide system configuration information to the zone. (In the Real World(tm) you will usually automate this step.) Shutdown the zone. Detach the zone from the original system. Attach the zone to its new "home" system. Boot the zone. The zone can be used normally, and even migrated back, or to a different system. Details The rest of this shows the commands and output. The two hostnames are "sysA" and "sysB". Note that each Solaris guest might use a different device name for the VDI that they share. I used the device names shown below, but you must discover the device name(s) after booting each guest. In a production environment you would also discover the device name first and then configure the zone with that name. Fortunately, you can use the command "zpool import" or "format" to discover the device on the "new" host for the zone. The first steps create the VirtualBox guests and the shared disk drive. I describe the steps here without demonstrating them. Download VirtualBox and install it using a method normal for your host OS. You can read the complete instructions. Create two VirtualBox guests, each to run Solaris 11.1. Each will use its own VDI as its root disk. Install Solaris 11.1 in each guest.Install Solaris 11.1 in each guest. To install a Solaris 11.1 guest, you can either download a pre-built VirtualBox guest, and import it, or install Solaris 11.1 from the "text install" media. If you use the latter method, after booting you will not see a windowing system. To install the GUI and other important things, login and run "pkg install solaris-desktop" and take a break while it installs those important things. Life is usually easier if you install the VirtualBox Guest Additions because then you can copy and paste between the host and guests, etc. You can find the guest additions in the folder matching the version of VirtualBox you are using. You can also read the instructions for installing the guest additions. To create the zone's shared VDI in VirtualBox, you can open the storage configuration for one of the two guests, select the SATA controller, and click on the "Add Hard Disk" icon nearby. Choose "Create New Disk" and specify an appropriate path name for the file that will contain the VDI. The shared VDI must be at least 1.5 GB. Note that the guest must be stopped to do this. Add that VDI to the other guest - using its Storage configuration - so that each can access it while running. The steps start out the same, except that you choose "Choose Existing Disk" instead of "Create New Disk." Because the disk is configured on both of them, VirtualBox prevents you from running both guests at the same time. Identify device names of that VDI, in each of the guests. Solaris chooses the name based on existing devices. The names may be the same, or may be different from each other. This step is shown below as "Step 1." Assumptions In the example shown below, I make these assumptions. The guest that will own the zone at the beginning is named sysA. The guest that will own the zone after the first migration is named sysB. On sysA, the shared disk is named /dev/dsk/c7t2d0 On sysB, the shared disk is named /dev/dsk/c7t3d0 (Finally!) The Steps Step 1) Determine the name of the disk that will move back and forth between the systems. root@sysA:~# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,2829@d/disk@0,0 1. c7t2d0 /pci@0,0/pci8086,2829@d/disk@2,0 Specify disk (enter its number): ^D Step 2) The first thing to do is partition and label the disk. The magic needed to write an EFI label is not overly complicated. root@sysA:~# format -e c7t2d0 selecting c7t2d0 [disk formatted] FORMAT MENU: ... format fdisk No fdisk table exists. The default partition for the disk is: a 100% "SOLARIS System" partition Type "y" to accept the default partition, otherwise type "n" to edit the partition table. n SELECT ONE OF THE FOLLOWING: ... Enter Selection: 1 ... G=EFI_SYS 0=Exit? f SELECT ONE... ... 6 format label ... Specify Label type[1]: 1 Ready to label disk, continue? y format quit root@sysA:~# ls /dev/dsk/c7t2d0 /dev/dsk/c7t2d0 Step 3) Configure zone1 on sysA. root@sysA:~# zonecfg -z zone1 Use 'create' to begin configuring a new zone. zonecfg:zone1 create create: Using system default template 'SYSdefault' zonecfg:zone1 set zonename=zone1 zonecfg:zone1 set zonepath=/zones/zone1 zonecfg:zone1 add rootzpool zonecfg:zone1:rootzpool add storage dev:dsk/c7t2d0 zonecfg:zone1:rootzpool end zonecfg:zone1 exit root@sysA:~# oot@sysA:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: ... rootzpool: storage: dev:dsk/c7t2d0 Step 4) Install the zone. This step takes the most time, but you can wander off for a snack or a few laps around the gym - or both! (Just not at the same time...) root@sysA:~# zoneadm -z zone1 install Created zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T163634Z.zone1.install Image: Preparing at /zones/zone1/root. AI Manifest: /tmp/manifest.xml.RXaycg SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: zone1 Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/support/ DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 183/183 33556/33556 222.2/222.2 2.8M/s PHASE ITEMS Installing new actions 46825/46825 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 1696.847 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T163634Z.zone1.install Step 5) Boot the Zone. root@sysA:~# zoneadm -z zone1 boot Step 6) Login to zone's console to complete the specification of system information. root@sysA:~# zlogin -C zone1 Answer the usual questions and wait for a login prompt. Then you can end the console session with the usual "~." incantation. Step 7) Shutdown the zone so it can be "moved." root@sysA:~# zoneadm -z zone1 shutdown Step 8) Detach the zone so that the original global zone can't use it. root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 installed /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 484M 1.51G 23% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool Step 9) Review the result and shutdown sysA so that sysB can use the shared disk. root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# init 0 Step 10) Now boot sysB and configure a zone with the parameters shown above in Step 1. (Again, the safest method is to use "zonecfg ... export" on sysA as described in section "Method Overview" above.) The one difference is the name of the rootzpool storage device, which was shown in the list of assumptions, and which you must determine by booting sysB and using the "format" or "zpool import" command. When that is done, you should see the output shown next. (I used the same zonename - "zone1" - in this example, but you can choose any valid zonename you want.) root@sysB:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysB:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: linkname: net0 ... rootzpool: storage: dev:dsk/c7t3d0 Step 11) Attaching the zone automatically imports the zpool. root@sysB:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T184034Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T184034Z.zone1.attach root@sysB:~# zoneadm -z zone1 boot root@sysB:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 Step 12) Now let's migrate the zone back to sysA. Create a file in zone1 so we can verify it exists after we migrate the zone back, then begin migrating it back. root@zone1:~# ls /opt root@zone1:~# touch /opt/fileA root@zone1:~# ls -l /opt/fileA -rw-r--r-- 1 root root 0 Oct 22 14:47 /opt/fileA root@zone1:~# exit logout [Connection to zone 'zone1' pts/2 closed] root@sysB:~# zoneadm -z zone1 shutdown root@sysB:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool root@sysB:~# init 0 Step 13) Back on sysA, check the status. Oracle Corporation SunOS 5.11 11.1 September 2012 root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - Step 14) Re-attach the zone back to sysA. root@sysA:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T190441Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T190441Z.zone1.attach root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 491M 1.51G 24% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 boot root@sysA:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 root@zone1:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 1.98G 538M 1.46G 26% 1.00x ONLINE - Step 15) Check for the file created on sysB, earlier. root@zone1:~# ls -l /opt total 1 -rw-r--r-- 1 root root 0 Oct 22 14:47 fileA Next Steps Here is a brief list of some of the fun things you can try next. Add space to the zone by adding a second storage device to the rootzpool. Make sure that you add it to the configurations of both zones! Create a new zone, specifying two disks in the rootzpool when you first configure the zone. When you install that zone, or clone it from another zone, zoneadm uses those two disks to create a mirrored pool. (Three disks will result in a three-way mirror, etc.) Conclusion Hopefully you have seen the ease with which you can now move Solaris Zones from one system to another.

    Read the article

  • iproute2 not functioning ("RTNETLINK answers: Operation not supported")

    - by James Watt
    The command and error message: gtwy ~ # ip rule add from 64.251.23.186 table t1 RTNETLINK answers: Operation not supported Older article of the same problem, but it did not help me: http://forums.gentoo.org/viewtopic-t-696982-start-0-postdays-0-postorder-asc-highlight-.html I have looked on google at great lengths to try to find a solution. It seems that my kernel configuration is missing something? Any help or ideas would be appreciated. My system/kernel is: 2.6.36-gentoo-r5 #3 SMP Thu Jan 13 10:49:06 EST 2011 x86_64 Intel(R) Xeon(R) CPU X3220 @ 2.40GHz GenuineIntel GNU/Linux. I am posting this on SuperUser since this system is used as a workstation and this problem is unrelated to specific tasks that are handled exclusively by servers. iproute2 is installed: gtwy etc # emerge --search iproute2 Searching... [ Results for search key : iproute2 ] [ Applications found : 1 ] * sys-apps/iproute2 Latest version available: 2.6.35-r2 Latest version installed: 2.6.35-r2 Size of files: 378 kB Homepage: http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2 Description: kernel routing and traffic control utilities License: GPL-2 A small snippet of my kernel .config (view entire .config): gtwy linux # cat .config | grep NETLINK CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CT_NETLINK=y CONFIG_SCSI_NETLINK=y gtwy linux # cat .config | grep IP_ADVANCED_ROUTER CONFIG_IP_ADVANCED_ROUTER=y gtwy linux # cat .config | grep INGRESS CONFIG_NET_SCH_INGRESS=y gtwy linux # cat .config | grep NET_SCHED CONFIG_NET_SCHED=y emerge --info Portage 2.1.9.25 (default/linux/amd64/10.0, gcc-4.1.2, glibc-2.10.1-r1, 2.6.36-gentoo-r5 x86_64) ================================================================= System uname: Linux-2.6.36-gentoo-r5-x86_64-Intel-R-_Xeon-R-_CPU_X3220_@_2.40GHz-with-gentoo-1.12.13 Timestamp of tree: Thu, 13 Jan 2011 01:15:01 +0000 app-shells/bash: 4.0_p37 dev-java/java-config: 1.3.7-r1, 2.1.10 dev-lang/python: 2.4.6, 2.5.4-r4, 2.6.5-r2, 3.1.2-r3 sys-apps/baselayout: 1.12.13 sys-apps/sandbox: 1.6-r2 sys-devel/autoconf: 2.13, 2.65 sys-devel/automake: 1.9.6-r2::<unknown repository>, 1.10.2, 1.11.1 sys-devel/binutils: 2.20.1-r1 sys-devel/gcc: 4.1.2, 4.3.4, 4.4.3-r2 sys-devel/gcc-config: 1.4.1 sys-devel/libtool: 2.2.6b sys-devel/make: 3.81 virtual/os-headers: 2.6.30-r1 (sys-kernel/linux-headers) ACCEPT_KEYWORDS="amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=nocona -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /var/bind" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=nocona -O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch" GENTOO_MIRRORS="http://gentoo.chem.wisc.edu/gentoo" LC_ALL="en_US.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" LINGUAS="en" MAKEOPTS="-j5" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage" USE="acl amd64 apache2 berkdb bzip2 cli cracklib crypt ctype cups curl cxx dri fortran gdbm gpm iconv jpeg jpeg2k libwww mmx modules mudflap multilib mysql ncurses nls nptl nptlonly openmp pam pcre perl php png pppd python readline session sockets sse sse2 ssl symlink sysfs tcpd threads unicode vhosts xml xorg xsl zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

    Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279  | Next Page >