Search Results

Search found 64639 results on 2586 pages for 'work stealing'.

Page 274/2586 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Laptop screen blank after login when external monitor is not connected

  - by Ramon Suarez

  Ubuntu does not switch back automatically to only monitor present when booting after disconnecting external monitor. Here's a video showing what happens. I get to the login window and everything looks ok, then I type my password, the desktop image shows up and... everything goes blank. It does not happen when I just login as a guest. When possible I work with my laptop connected to an external screen via the VGA port. The problem comes when I boot the computer without that secondary screen connected: The login screen comes out ok. After login the screen goes black, but I can hear the login sound. If I hit ctr + alt + backwards-delete and login again sometimes it is fixed, but not all. If I log in as a different user everything is OK. Then I log in as my user and sometimes it works. To have a screen I have to plug a monitor. Although I have turned on the laptop display with that monitor on, if I reboot it goes blank again after login, even if I turn off the external monitor before turning off the computer. I've managed to get my screen back with my username after going into recovery mode, but only sometimes. Failsafe would not load after second screen asking me what I wanted to do (no mouse to click nor keyboard working). My computer is a LDLC Aurore BB1-i5 -8 -S1. Which is the configuration file that keeps the information about the monitors using Displays under lightgdm and where is it? I guess if I could edit it I may have a chance :) One of the things I tried following a solution in another post was removing my monitors.xml file, but it does not work and I don't know how to create a good one that I could use now. When doing DISPLAY=:0 xrandrI get: Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) This is the full dmesg after activating sudo xdiagnoseas Bryce sugested. (If you tell me the relevant parts I will paste them here) When conecting the external monitor, only the external will work, although I can see using Displays that the computer thinks that both are working. I've asked the question in Launchpad but have it keeps on expiring without any feedback. In my opinion Ubuntu should be able to detect automatically that there is no external monitor present and switch to the laptop monitor. There's a similar question here, but it does not apply to my case External monitor set as primary even when disconnected from laptop Update: For clarification, the problem happens only with my user and once I log in. I even get to see the screensaver for about a second, and then it goes blank. Tried Bryce's example (see his answer below), but it did not work. This is the info I get from tty1 with Display=:0 xrandr: – Ramon Suarez Jul 9 at 16:36 Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)

  Read the article

• Thoughts on Thoughts on TDD

  Brian Harry wrote a post entitled Thoughts on TDD that I thought I was going to let lie, but I find that I need to write a response. I find myself in agreement with Brian on many points in the post, but I disagree with his conclusion. Not surprisingly, I agree with the things that he likes about TDD. Focusing on the usage rather than the implementation is really important, and this is important whether you use TDD or not. And YAGNI was a big theme in my Seven Deadly Sins of Programming series. Now, on to what he doesnt like. He says that he finds it inefficient to have tests that he has to change every time he refactors. Here is where we part company. If you are having to do a lot of test rewriting (say, more than a couple of minutes work to get back to green) *often* when you are refactoring your code, I submit that either you are testing things that you dont need to test (internal details rather than external implementation), your code perhaps isnt as decoupled as it could be, or maybe you need a visit to refactorers anonymous. I also like to refactor like crazy, but as we all know, the huge downside of refactoring is that we often break things. Important things. Subtle things. Which makes refactoring risky. *Unless* we have a set of tests that have great coverage. And TDD (or Example-based Design, which I prefer as a term) gives those to us. Now, I dont know what sort of coverage Brian gets with the unit tests that he writes, but I do know that for the majority of the developers Ive worked with and I count myself in that bucket the coverage of unit tests written afterwards is considerably inferior to the coverage of unit tests that come from TDD. For me, it all comes down to the answer to the following question: How do you ensure that your code works now and will continue to work in the future? Im willing to put up with a little efficiency on the front side to get that benefit later. Its not the writing of the code thats the expensive part, its everything else that comes after. I dont think that stepping through test cases in the debugger gets you what you want. You can verify what the current behavior is, sure, and do it fairly cheaply, but you dont help the guy in the future who doesnt know what conditions were important if he has to change your code. His second part that he doesnt like backing into an architecture (go read to see what he means). Ive certainly had to work with code that was like this before, and its a nightmare the code that nobody wants to touch. But thats not at all the kind of code that you get with TDD, because if youre doing it right youre doing the write a failing tests, make it pass, refactor approach. Now, you may miss some useful refactorings and generalizations for this, but if you do, you can refactor later because you have the tests that make it safe to do so, and your code tends to be easy to refactor because the same things that make code easy to write unit tests for make it easy to refactor. I also think Brian is missing an important point. We arent all as smart as he is. Im reminded a bit of the lesson of Intentional Programming, Charles Simonyis paradigm for making programming easier. I played around with Intentional Programming when it was young, and came to the conclusion that it was a pretty good thing if you were as smart as Simonyi is, but it was pretty much a disaster if you were an average developer. In this case, TDD gives you a way to work your way into a good, flexible, and functional architecture when you dont have somebody of Brians talents to help you out. And thats a good thing.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Bose USB audio: crackling popping sound, eventually die

  - by Richard Barrett

  I've been trying to troubleshoot this issue for a while now. Any help would be much appreciated. I'm having trouble getting my Bose "Companion 5 multimedia speakers" working with my installation of Ubuntu 12.04 (link to Bose product here: http://www.bose.com/controller?url=/shop_online/digital_music_systems/computer_speakers/companion_5/index.jsp ). The issue seems to be low level (not just Ubuntu). What happens: When I boot into Ubuntu, I can get Rhythm box to play ok. However, if I try anything else (an .avi file, a webpage, or Clementine player with mp3 files) I get crackling, popping, or choppy sounds. If I move the mouse around, especially if it seems graphic intensive, the problem gets worse (more crackling noises). The more taxing it appears to be, the more likely it is that the sound will just die altogether until I reboot. For some reason the videos at www.bloomberg.com seem especially bad for it (my sound normally goes dead in under 45 seconds and won't work until reboot). Both my desktop running Ubuntu 12.04 and my laptop (running the same) have the same crackling problem. Troubleshooting so far: A friend of mine who knows linux well tried to solve it for me without any luck. He took pulseaudio out of the equation, but still had the problem just using AlSA. Among the many things he tried was adjusting the latency, but that didn't help either. I've also tried things like adjusting the USB device settings in the config file from -2 to -1 so that it will use my USB sound and I also commented out the lines that would stop that. These don't do anything. (That really seems like it's for someone who is getting no sound at all, so it's not surprising this won't work.) My friend's laptop running his Archlinux could play my Bose USB speakers without any problems. I also tried setting my daemon.conf file to use 6 channels (based on this http://lotphelp.com/lotp/configure-ubuntu-51-surround-sound ) but that didn't work either. I recently used a DVD to boot into Ubuntu Studio 12.04 (because it uses a live audio kernel) and this happened: I got perfect sound for a minute or two When I started moving windows around while sound was playing, the sound died again. Perhaps more interesting: There is a headphone out jack on the Bose system. When I use it, the audio is perfect for all applications (even the deadly bloomberg.com videos with .avi playing at the same time and moving around windows). Also, there is an audio-in jack on the Bose system. I can use a male-to-male mini jack to go from my soundcard's output to the Bose input and then all sound works perfectly. -However, it still requires the Bose to be plugged in to USB, otherwise I lose all sound. Any thoughts? Any suggestions for trouble shooting? (Or any suggestions for somewhere else to post to solve this?) Any logs or other files I can provide to help someone help me work this out? Your help is much appreciated! Rick BTW: I sometimes get people posting responses like "My Bose USB system works great with Ubuntu 12.04," without any more details. Is there anything I should ask such people to narrow down my problem? (It's kind of annoying to hear such a response because it doesn't help solve my problem.)

  Read the article

• .Net Reflector 6.5 EAP now available

  - by CliveT

  With the release of CLR 4 being so close, we’ve been working hard on getting the new C# and VB language features implemented inside Reflector. The work isn’t complete yet, but we have some of the features working. Most importantly, there are going to be changes to the Reflector object model, and we though it would be useful for people to see the changes and have an opportunity to comment on them. Before going any further, we should tell you what the EAP contains that’s different from the released version. A number of bugs have been fixed, mainly bugs that were raised via the forum. This is slightly offset by the fact that this EAP hasn’t had a whole lot of testing and there may have been new bugs introduced during the development work we’ve been doing. The C# language writer has been changed to display in and out co- and contra-variance markers on interfaces and delegates, and to display default values for optional parameters in method definitions. We also concisely display values passed by reference into COM calls. However, we do not change callsites to display calls using named parameters; this looks like hard work to get right. The forthcoming version of the C# language introduces dynamic types and dynamic calls. The new version of Reflector should display a dynamic call rather than the generated C#: dynamic target = MyTestObject(); target.Hello("Mum"); We have a few bugs in this area where we are not casting to dynamic when necessary. These have been fixed on a branch and should make their way into the next EAP. To support the dynamic features, we’ve added the types IDynamicMethodReferenceExpression, IDynamicPropertyIndexerExpression, and IDynamicPropertyReferenceExpression to the object model. These types, based on the versions without “Dynamic” in the name, reflect the fact that we don’t have full information about the method that is going to be called, but only have its name (as a string). These interfaces are going to change – in an internal version, they have been extended to include information about which parameter positions use runtime types and which use compile time types. There’s also the interface, IDynamicVariableDeclaration, that can be used to determine if a particular variable is used at dynamic call sites as a target. A couple of these language changes have also been added to the Visual Basic language writer. The new features are exposed only when the optimization level is set to .NET 4. When the level is set this high, the other standard language writers will simply display a message to say that they do not handle such an optimization level. Reflector Pro now has 4.0 as an optional compilation target and we have done some work to get the pdb generation right for these new features. The EAP version of Reflector no longer installs the add-in on startup. The first time you run the EAP, it displays the integration options dialog. You can use the checkboxes to select the versions of Visual Studio into which you want to install the EAP version. Note that you can only have one version of Reflector Pro installed in Visual Studio; if you install into a Visual Studio that has another version installed, the previous version will be removed. Please try it out and send your feedback to the EAP forum.

  Read the article

• Taking Your Business Scorecard Golfing

  - by tobyehatch

  Our workplace world is definitely changing. Not only are we taking work home, but we are working during odd hours in some very strange places.  I had the pleasure of interviewing Jacques Vigeant, Product Strategy Manager for Oracle Business Intelligence and Enterprise Performance Management, on a Podcast, and he enlightened me about how our mobile devices and business scorecards are enabling us to be more accountable and keep a watchful eye on business – even while on the golf course.Business scorecards have been around for many years - so I asked Jacques if he felt they had changed significantly due to technology. His answer was, “Yes, and no.”  Jacques agreed that scorecard enthusiasts are still passionate about executing the company strategy and monitoring Key Performance Indicators (KPIs), but scorecards and Business Intelligence (BI) as a whole have changed.  He explained that five to six years ago, people did BI work at the office and, for the most part, disconnected from their computer and workplace when they went home – with the exception of checking email and making a phone call or two. But now, that is no longer the case. People are virtually always connected with work and, more importantly, expect their BI and scorecards to be ‘always on,’ regardless of whether they are at their desk or somewhere else.Basically, the BI paradigm has changed from a 'pull' model, where employees are at their desks querying or pulling information from the system, to a 'push' model where employees expect their BI and scorecard systems to reach out (or push information) to them when there is something of note to learn or something on which they need to take action. I found this very interesting. However mobile devices do have their limitations with respect to screen sizes – does it really make sense to look at your strategy/scorecard on tiny devices? What kind of scorecard activities can you really expect to be able to do? Jacques’ answer was very logical. “When you think of a scorecard, it is really comprised of an organization of KPIs that are aligned with the strategic objectives of your company. KPIs are the heart of how you will execute your strategy. So, if you decompose that a little more, each KPI is well defined with the thresholds that you should keep an eye on and who is responsible for them. When we talk about scorecarding on a phone, we aren’t talking about surfing the strategy and exploring the strategy map like we do on the desktop. In a scorecarding context, we use the phone more as an alerting mechanism or simple monitoring device for your KPIs.”Jacques gave a great example of an inventory manager who took part of an afternoon off to go golfing before winter finally hit, and while on the front nine holes, his phone vibrated. His scorecard was alerting him that the inventory levels for one of the products was below some threshold that he had set.  From his phone, he had set up three options within Oracle Scorecard and Strategy Management (OSSM) for this type of situation:  1. Contact the warehouse manager directly by phone and work it out (standard phone function)  2. Tap/hold the KPI and add an annotation to the KPI in OSSM using the dictation capabilities of the phone and deal with it more fully when he gets back to the office  3. Tap/hold the KPI and invoke a business process from OSSM to transfer product from another warehouse with higher stock levels to the one that needs it  Being on a phone should still give you options to quickly deal with situations as needed, but mobile phones are not designed for nor should try to replicate the full desktop experience. We covered other interesting subjects in the interview, including how Oracle is keeping pace with mobile innovation and new devices such as Google Glasses, Galaxy Gear, Pebble Watches and more, and how Oracle is handling mobile security– which is great news for our mobile workforce. To listen to the entire Podcast, click here.To learn more about Oracle Scorecard and Strategy Management, click here.

  Read the article

• Recent improvements in Console Performance

  - by loren.konkus

  Recently, the WebLogic Server development and support organizations have worked with a number of customers to quantify and improve the performance of the Administration Console in large, distributed configurations where there is significant latency in the communications between the administration server and managed servers. These improvements fall into two categories: Constraining the amount of time that the Console stalls waiting for communication Reducing and streamlining the amount of data required for an update A few releases ago, we added support for a configurable domain-wide mbean "Invocation Timeout" value on the Console's configuration: general, advanced section for a domain. The default value for this setting is 0, which means wait indefinitely and was chosen for compatibility with the behavior of previous releases. This configuration setting applies to all mbean communications between the admin server and managed servers, and is the first line of defense against being blocked by a stalled or completely overloaded managed server. Each site should choose an appropriate timeout value for their environment and network latency. In the next release of WebLogic Server, we've added an additional console preference, "Management Operation Timeout", to the Console's shared preference page. This setting further constrains how long certain console pages will wait for slowly responding servers before returning partial results. While not all Console pages support this yet, key pages such as the Servers Configuration and Control table pages and the Deployments Control pages have been updated to support this. For example, if a user requests a Servers Table page and a Management Operation Timeout occurs, the table is displayed with both local configuration and remote runtime information from the responding managed servers and only local configuration information for servers that did not yet respond. This means that a troublesome managed server does not impede your ability to manage your domain using the Console. To support these changes, these Console pages have been re-written to use the Work Management feature of WebLogic Server to interact with each server or deployment concurrently, which further improves the responsiveness of these pages. The basic algorithm for these pages is: For each configuration mbean (ie, Servers) populate rows with configuration attributes from the fast, local mbean server Find a WorkManager For each server, Create a Work instance to obtain runtime mbean attributes for the server Schedule Work instance in the WorkManager Call WorkManager.waitForAll to wait WorkItems to finish, constrained by Management Operation Timeout For each WorkItem, if the runtime information obtained was not complete, add a message indicating which server has incomplete data Display collected data in table In addition to these changes to constrain how long the console waits for communication, a number of other changes have been made to reduce the amount and scope of managed server interactions for key pages. For example, in previous releases the Deployments Control table looked at the status of a deployment on every managed server, even those servers that the deployment was not currently targeted on. (This was done to handle an edge case where a deployment's target configuration was changed while it remained running on previously targeted servers.) We decided supporting that edge case did not warrant the performance impact for all, and instead only look at the status of a deployment on the servers it is targeted to. Comprehensive status continues to be available if a user clicks on the 'status' field for a deployment. Finally, changes have been made to the System Status portlet to reduce its impact on Console page display times. Obtaining health information for this display requires several mbean interactions with managed servers. In previous releases, this mbean interaction occurred with every display, and any delay or impediment in these interactions was reflected in the display time for every page. To reduce this impact, we've made several changes in this portlet: Using Work Management to obtain health concurrently Applying the operation timeout configuration to constrain how long we will wait Caching health information to reduce the cost during rapid navigation from page to page and only obtaining new health information if the previous information is over 30 seconds old. Eliminating heath collection if this portlet is minimized. Together, these Console changes have resulted in significant performance improvements for the customers with large configurations and high latency that we have worked with during their development, and some lesser performance improvements for those with small configurations and very fast networks. These changes will be included in the 11g Rel 1 patch set 2 (10.3.3.0) release of WebLogic Server.

  Read the article

• Getting Started with StreamInsight 2.1

  - by Roman Schindlauer

  If you're just beginning to get familiar with StreamInsight, you may be looking for a way to get started. What are the basics? How can I get my first StreamInsight application running so I can see how it works? Where is the 'front door' that will get me going? If that describes you, then this blog entry might be just what you need. If you're already a StreamInsight wiz, keep reading anyway - you may find some helpful links here that you weren't aware of. But here's what we'd like from you experienced readers in particular: if you know of other good resources that we missed, please feel free to add them in the comments below. We appreciate you sharing your expertise. The Book The basic documentation for StreamInsight is located in the MSDN Library (Microsoft StreamInsight 2.1). You'll notice that previous versions of StreamInsight are still there (1.2 and 2.0), but if you're just getting started you can stick to the 2.1 section. The documentation has been organized to function as reference material, which is fine after you're familiar with the technology. But if you're trying to learn the basics, you might want to take a different path instead of just starting at the top. The following is one map you can use. What Is StreamInsight? Here is a sequence of topics that should give you a good overview of what StreamInsight is and how it works: Overview answers the question, "what is it?" StreamInsight Server Architecture gives you a quick look at a high-level architectural drawing StreamInsight Concepts lays out an overview of the basic components Deploying StreamInsight Entities to a StreamInsight Server describes the mechanics of how these components work together Getting an Example Running Once you have this background, go ahead and install StreamInsight and get a basic example up and running: Installation download and install the software StreamInsight Examples walk through a set of 3 simple StreamInsight applications that work together to demonstrate what you learned in the topics above; you can copy and paste the code into Visual Studio, compile, and run That's it - you now have a real, functioning StreamInsight system! Now that you have a handle on the basics, you might want to start digging deeper. Digging Deeper Here's a suggested path through the documentation to help you understand the next layer of StreamInsight technologies: Using Event Sources and Event Sinks sources supply data and sinks consume it; this topic gives you an overview of how they work Publishing and Connecting to the StreamInsight Server practical details on how to set up a StreamInsight server A Hitchhiker’s Guide to StreamInsight 2.1 Queries queries are the heart of how StreamInsight performs data analytics, and this whitepaper will help you really understand how they work Using StreamInsight LINQ root through this section for technical details on specific query components Using the StreamInsight Event Flow Debugger in addition to troubleshooting, the debugger is a great way to learn more about what goes on inside a StreamInsight application And Even Deeper Finally, to get a handle on some of the more complex things you can do with StreamInsight, dig into these: Input and Output Adapters adapters can be useful for handling more complex sources and sinks Building Resilient StreamInsight Applications a resilient application is able to recover from system failures Operations this section will help you monitor and troubleshoot a running StreamInsight system The StreamInsight Community As you're designing and developing your StreamInsight solutions, you probably will find it helpful to see working examples or to learn tips and tricks from others. Or maybe you need a place to post a vexing question. Here are some community resources that we have found useful. If you know of others, please add them in the comments below. Code samples and tools Official StreamInsight code samples Introduction to LinqPad Driver for StreamInsight 2.1 - LinqPad is a very useful tool for developing queries The following case studies are based on earlier versions of StreamInsight, but they still are useful examples: Microsoft Media Analytics - real-time monitoring and analytic Edgenet - responding to information from multiple source ICONICS - managing energy usage Blogs Microsoft StreamInsight Ruminations of J.net Richard Seroter's Architecture Musings pluralsight Forums MSDN StreamInsight Forum stackoverflow Training Microsoft StreamInsight Fundamentals (“Introducing StreamInsight” is free) from pluralsight Twitter @streaminsight   You’re a StreamInsight Expert That should get you going. Please add any other resources you have found useful in the comments below.   Regards, The StreamInsight Team

  Read the article

• ResourceSerializable: an alternate to ORM and ActiveRecord

  - by Levi Morrison

  A few opinionated reasons I don't like the traditional ORM and ActiveRecord patterns: They work only with a database. Sometimes I'm dealing with objects from an API and other objects from a database. All the implementations I have seen don't allow for that. Feel free to clue me in if I'm wrong on this. They are brittle. Changes in the database will likely break your implemenation. Some implementations can help reduce this, but a few of the ones I've seen don't. Their very design is influenced by the database. If I want to switch to using an API, I'll have to redesign the object to get it to work (likely). It seems to violate the single-responsibility pattern. They know what they are and how they act, but they also know how they are created, destroyed and saved? Seems a bit much. What about an approach that is somewhat more familiar in PHP: implementing an interface? In php 5.4, we'll have the JsonSerializable interface that defines the data to be json_encoded, so users will become accustomed to this type of thing. What if there was a ResourceSerializable interface? This is still an ORM by name, but certainly not by tradition. interface ResourceSerializable { /** * Returns the id that identifies the resource. */ function resourceId(); /** * Returns the 'type' of the resource. */ function resourceType(); /** * Returns the data to be serialized. */ function resourceSerialize(); } Things might be poorly named, I'll take suggestions. Notes: ResourceId will work for API's and databases. As long as your primary key in the database is the same as the resource ID in the API, there is no conflict. All of the API's I've worked with have a unique ID for the resource, so I don't see any issues there. ResourceType is the group or type associated with the resource. You can use this to map the resource to an API call or a database table. If the ResourceType was person, it could map to /api/1/person/{resourceId} and the table persons (or people, if it's smart enough). resourceSerialize() returns the data to be stored. Keys would identify API parameters and database table columns. This also seems easier to test than ActiveRecord / Orm implemenations. I haven't done much automated testing on traditional ActiveRecord/ORM implemenations, so this is merely a guess. But it seems that I being able to create objects independently of the library helps me. I don't have to use load() to get an existing resource, I can simply create one and set all the right properties. This is not so easy in the ActiveRecord / Orm implemenations I've dealt with. Downsides: You need another object to serialize it. This also means you have more code in general as you have to use more objects. You have to map resource types to API calls and database tables. This is even more work, but some ORMs and ActiveRecord implementations require you to map objects to table names anyway. Are there other downsides that you see? Does this seem feasible to you? How would you improve it? Note: I almost asked this on StackOverflow because it might be too vague for their standards, but I'm still not really familiar with programmers.stackexchange.com, so please help me improve my question if it doesn't shape up to standards here.

  Read the article

• JCP Awards 10 Year Retrospective

  - by Heather VanCura

  As we celebrate 10 years of JCP Program Award recognition in 2012,  take a look back in the Retrospective article covering the history of the JCP awards.  Most recently, the JCP awards were  celebrated at JavaOne Latin America in Brazil, where SouJava was presented the JCP Member of the Year Award for 2012 (won jointly with the London Java Community) for their contributions and launch of the Global Adopt-a-JSR Program. This is also a good time to honor the JCP Award Nominees and Winners who have been designated as Star Spec Leads.  Spec Leads are key to the Java Community Process (JCP) program. Without them, none of the Java Specification Requests (JSRs) would have begun, much less completed and become implemented in shipping products.  Nominations for 2012 Start Spec Leads are now open until 31 December. The Star Spec Lead program recognizes Spec Leads who have repeatedly proven their merit by producing high quality specifications, establishing best practices, and mentoring others. The point of such honor is to endorse the good work that they do, showcase their methods for other Spec Leads to emulate, and motivate other JCP program members and participants to get involved in the JCP program. Ed Burns – A Star Spec Lead for 2009, Ed first got involved with the JCP program when he became co-Spec Lead of JSR 127, JavaServer Faces (JSF), a role he has continued through JSF 1.2 and now JSF 2.0, which is JSR 314. Linda DeMichiel – Linda thus involved in the JCP program from its very early days. She has been the Spec Lead on at least three JSRs and an EC member for another three. She holds a Ph.D. in Computer Science from Stanford University. Gavin King – Nominated as a JCP Outstanding Spec Lead for 2010, for his work with JSR 299. His endorsement said, “He was not only able to work through disputes and objections to the evolving programming model, but he resolved them into solutions that were more technically sound, and which gained support of its pundits.” Mike Milikich –  Nominated for his work on Java Micro Edition (ME) standards, implementations, tools, and Technology Compatibility Kits (TCKs), Mike was a 2009 Star Spec Lead for JSR 271, Mobile Information Device Profile 3. David Nuescheler – Serving as the CTO for Day Software, acquired by Adobe Systems, David has been a key player in the growth of the company’s global content management solution. In 2002, he became Spec Lead for JSR 170, Content Repository for Java Technology API, continuing for the subsequent version, JSR 283. Bill Shannon – A well-respected name in the Java community, Bill came to Oracle from Sun as a Distinguished Engineer and is still performing at full speed as Spec Lead for JSR 342, Java EE 7,  as an alternate EC member, and hands-on problem solver for the Java community as a whole. Jim Van Peursem – Jim holds a PhD in Computer Engineering. He was part of the Motorola team that worked with Sun labs on the Spotless VM that became the KVM. From within Motorola, Jim has been responsible for many aspects of Java technology deployment, from an independent Connected Limited Device Configuration (CLDC) and Mobile Information Device Profile (MIDP) implementations, to handset development, to working with the industry in defining many related standards. Participation in the JCP Program goes well beyond technical proficiency. The JCP Awards Program is an attempt to say “Thank You” to all of the JCP members, Expert Group Members, Spec Leads, and EC members who give their time to contribute to the evolution of Java technology.

  Read the article

• Do you want to be an ALM Consultant?

  - by Martin Hinshelwood

  Northwest Cadence is looking for our next great consultant! At Northwest Cadence, we have created a work environment that emphasizes excellence, integrity, and out-of-the-box thinking.  Our customers have high expectations (rightfully so) and we wouldn’t have it any other way!   Northwest Cadence has some of the most exciting customers I have ever worked with and even though I have only been here just over a month I have already: Provided training/consulting for 3 government departments Created and taught courseware for delivering Scrum to teams within a high profile multinational company Started presenting Microsoft's ALM Engagement Program  So if you are interested in helping companies build better software more efficiently, then.. Enquire at [email protected] Application Lifecycle Management (ALM) Consultant An ALM Consultant with a minimum of 8 years of relevant experience with Application Lifecycle Management, Visual Studio (including Visual Studio Team System) and software design is needed. Must provide thought leadership on best practices for enterprise architecture, understand the Microsoft technology solution stack, and have a thorough understanding of enterprise application integration. The ALM Practice Lead will play a central role in designing and implementing the overall ALM Practice strategy, including creating, updating, and delivering ALM courseware and consultancy engagements. This person will also provide project support, deliverables, and quality solutions on Visual Studio Team System that exceed client expectations. Engagements will vary and will involve providing expert training, consulting, mentoring, formulating technical strategies and policies and acting as a “trusted advisor” to customers and internal teams. Sound sense of business and technical strategy required. Strong interpersonal skills as well as solid strategic thinking are key. The ideal candidate will be capable of envisioning the solution based on the early client requirements, communicating the vision to both technical and business stakeholders, leading teams through implementation, as well as training, mentoring, and hands-on software development. The ideal candidate will demonstrate successful use of both agile and formal software development methods, enterprise application patterns, and effective leadership on prior projects. Job Requirements Minimum Education: Bachelor’s Degree (computer science, engineering, or math preferred). Locale / Travel: The Practice Lead position requires estimated 50% travel, most of which will be in the Continental US (a valid national Passport must be maintained).  This is a full time position and will be based in the Kirkland office. Preferred Education: Master’s Degree in Information Technology or Software Engineering; Premium Microsoft Certifications on .NET (MCSD) or MCPD or relevant experience; Microsoft Certified Trainer (MCT) or relevant experience. Minimum Experience and Skills: 7+ years experience with business information systems integration or custom business application design and development in a professional technology consulting, corporate MIS or software development environment. Essential Duties & Responsibilities: Provide training, consulting, and mentoring to organizations on topics that include Visual Studio Team System and ALM. Create content, including labs and demonstrations, to be delivered as training classes by Northwest Cadence employees. Lead development teams through the complete ALM and/or Visual Studio Team System solution. Be able to communicate in detail how a solution will integrate into the larger technical problem space for large, complex enterprises. Define technical solution requirements. Provide guidance to the customer and project team with respect to technical feasibility, complexity, and level of effort required to deliver a custom solution. Ensure that the solution is designed, developed and deployed in accordance with the agreed upon development work plan. Create and deliver weekly status reports of training and/or consulting progress. Engagement Responsibilities: · Provide a strong desire to provide thought leadership related to technology and to help grow the business. · Work effectively and professionally with employees at all levels of a customer’s organization. · Have strong verbal and written communication skills. · Have effective presentation, organizational and planning skills. · Have effective interpersonal skills and ability to work in a team environment. Enquire at [email protected]

  Read the article

• Talking JavaOne with Rock Star Kirk Pepperdine

  - by Janice J. Heiss

  Kirk Pepperdine is not only a JavaOne Rock Star but a Java Champion and a highly regarded expert in Java performance tuning who works as a consultant, educator, and author. He is the principal consultant at Kodewerk Ltd. He speaks frequently at conferences and co-authored the Ant Developer's Handbook. In the rapidly shifting world of information technology, Pepperdine, as much as anyone, keeps up with what's happening with Java performance tuning. Pepperdine will participate in the following sessions: CON5405 - Are Your Garbage Collection Logs Speaking to You? BOF6540 - Java Champions and JUG Leaders Meet Oracle Executives (with Jeff Genender, Mattias Karlsson, Henrik Stahl, Georges Saab) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Ellen Kraffmiller Martijn Verburg, Jeff Genender, and Henri Tremblay) I asked him what technological changes need to be taken into account in performance tuning. “The volume of data we're dealing with just seems to be getting bigger and bigger all the time,” observed Pepperdine. “A couple of years ago you'd never think of needing a heap that was 64g, but today there are deployments where the heap has grown to 256g and tomorrow there are plans for heaps that are even larger. Dealing with all that data simply requires more horse power and some very specialized techniques. In some cases, teams are trying to push hardware to the breaking point. Under those conditions, you need to be very clever just to get things to work -- let alone to get them to be fast. We are very quickly moving from a world where everything happens in a transaction to one where if you were to even consider using a transaction, you've lost." When asked about the greatest misconceptions about performance tuning that he currently encounters, he said, “If you have a performance problem, you should start looking at code at the very least and for that extra step, whip out an execution profiler. I'm not going to say that I never use execution profilers or look at code. What I will say is that execution profilers are effective for a small subset of performance problems and code is literally the last thing you should look at.And what is the most exciting thing happening in the world of Java today? “Interesting question because so many people would say that nothing exciting is happening in Java. Some might be disappointed that a few features have slipped in terms of scheduling. But I'd disagree with the first group and I'm not so concerned about the slippage because I still see a lot of exciting things happening. First, lambda will finally be with us and with lambda will come better ways.” For JavaOne, he is proctoring for Heinz Kabutz's lab. “I'm actually looking forward to that more than I am to my own talk,” he remarked. “Heinz will be the third non-Sun/Oracle employee to present a lab and the first since Oracle began hosting JavaOne. He's got a great message. He's spent a ton of time making sure things are going to work, and we've got a great team of proctors to help out. After that, getting my talk done, the Java Champion's panel session and then kicking back and just meeting up and talking to some Java heads."Finally, what should Java developers know that they currently do not know? “’Write Once, Run Everywhere’ is a great slogan and Java has come closer to that dream than any other technology stack that I've used. That said, different hardware bits work differently and as hard as we try, the JVM can't hide all the differences. Plus, if we are to get good performance we need to work with our hardware and not against it. All this implies that Java developers need to know more about the hardware they are deploying to.” Originally published on blogs.oracle.com/javaone.

  Read the article

• Making the most of next weeks SharePoint 2010 developer training

  - by Eric Nelson

  [you can still register if you are free on the afternoons of 9th to 11th – UK time] We have 50+ registrations with more coming in – which is fantastic. Please read on to make the most of the training. Background We have structured the training to make sure that you can still learn lots during the three days even if you do not have SharePoint 2010 installed. Additionally the course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Which means if you have zero time between now and next Wednesday then you are still good to go. But if you can do some pre-work you will likely get even more out of the three days. Step 1: Check out the topics and resources available on-demand The course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Take a lap around the SharePoint 2010 Training Course on Channel 9 Download the SharePoint Developer Training Kit Step 2: Use a pre-configured Virtual Machine which you can download (best start today – it is large!) Consider using the VM we created If you don't have access to SharePoint 2010. You will need a 64bit host OS and bare minimum of 4GB of RAM. 8GB recommended. Virtual PC can not be used with this VM – Virtual PC only supports 32bit guests. The 2010-7a Information Worker VM gives you everything you need to develop for SharePoint 2010. Watch the Video on how to use this VM Download the VM Remember you only need to download the “parts” for the 2010-7a VM. There are 3 subtly different ways of using this VM: Easiest is to follow the advice of the video and get yourself a host OS of Windows Server 2008 R2 with Hyper-V and simply use the VM Alternatively you can take the VHD and create a “Boot to VHD” if you have Windows 7 Ultimate or Enterprise Edition. This works really well – especially if you are already familiar with “Boot to VHD” (This post I did will help you get started) Or you can take the VHD and use an alternative VM tool such as VirtualBox if you have a different host OS. NB: This tends to involve some work to get everything running fine. Check out parts 1 to 3 from Rolly and if you go with Virtual Box use an IDE controller not SATA. SATA will blue screen. Note in the screenshot below I also converted the vhd to a vmdk. I used the FREE Starwind Converter to do this whilst I was fighting blue screens – not sure its necessary as VirtualBox does now work with VHDs. or Step 3 – Install SharePoint 2010 on a 64bit Windows 7 or Vista Host I haven’t tried this but it is now supported. Check out MSDN. Final notes: I am in the process of securing a number of hosted VMs for ISVs directly managed by my team. Your Architect Evangelist will have details once I have them! Else we can sort out on the Wed. Regrettably I am unable to give folks 1:1 support on any issues around Boot to VHD, 3rd party VM products etc. Related Links: Check you are fully plugged into the work of my team – have you done these simple steps including joining our new LinkedIn group?

  Read the article

• New Working Environment Starting November

  - by Jenson

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 This is actually a post dated update. After I’ve been working in the private sectors for so many years (the 2 years when I was working as IT trainer in a secondary school is not counted, as I was working under a contract with a private IT training agency), I’ve decided to try my luck into public sector. And fortunately, I passed the interview and I was offered a position of Web Administrator in a government statutory board, that’s Agency for Science, Technology and Research (of Singapore). During my previous employment with a Japanese MNC (multinational company), it was a totally new environment for me, as I had never worked for a Japanese company before, but the first time I work for Japanese company also gave me the very first nightmare I have with them, and vowed not to work for them anymore, and any other Japanese companies. No doubt I have freedom of choosing the tools and methods I wish to use for the projects, but the project management is simply too messy and out of order. And a lot of time, I don’t find that everyone is working as a team, more like achieving their own goals. Accountability for project is not shared, all lumped onto the shoulders of the developer in charge (they called it Software Engineer). I was working on a windows based .NET project, which I already voiced out that it’s not manageable by just 1 software engineer, but it seems like nobody cares, even the one who propose the solution to customer doesn’t care much. What he cares is whether you deliver the project on time so that he can please his customer and the senior management of his good work. Too many stories to tell, and I just simple doesn’t want to talk too much on this as it has already became the past to me. With my new title with the government agency, I hope to contribute my best to them, while learning as much as I can. I will share whatever I can on technologies, methodologies, and etc whichever I’m allowed and permitted to (of course, for those non-work-related stuff, I would be glad to share with you without much hesitation). Thank you! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• How do you report out user research results?

  - by user12277104

  A couple weeks ago, one of my mentees asked to meet, because she wanted my advice on how to report out user research results. She had just conducted her first usability test for her new employer, and was getting to the point where she wanted to put together some slides, but she didn't want them to be boring. She wanted to talk with me about what to present and how best to present results to stakeholders. While I couldn't meet for another week, thanks to slideshare, I could quickly point her in the direction that my in-person advice would have led her. First, I'd put together a panel for the February 2012 New Hampshire UPA monthly meeting that we then repeated for the 2012 Boston UPA annual conference. In this panel, I described my reporting techniques, as did six of my colleagues -- two of whom work for companies smaller than mine, and four of whom are independent consultants. Before taking questions, we each presented for 3 to 5 minutes on how we presented research results. The differences were really interesting. For example, when do you really NEED a long, written report (as opposed to an email, spreadsheet, or slide deck with callouts)? When you are reporting your test results to the FDA -- that makes sense. in this presentation, I describe two modes of reporting results that I use.  Second, I'd been a participant in the CUE-9 study. CUE stands for Comparative Usability Evaluation, and this was the 9th of these studies that Rolf Molich had designed. Originally, the studies were designed to show the variability in evaluation methods practitioners use to evaluate websites and applications. Of course, using methods and tasks of their own choosing, the results were wildly different. However, in this 9th study, the tasks were the same, the participants were the same, and the problem severity scale was the same, so how would the results of the 19 practitioners compare? Still wildly variable. But for the purposes of this discussion, it gave me a work product that was not proprietary to the company I work for -- a usability test report that I could share publicly. This was the way I'd been reporting results since 2005, and pretty much what I still do, when time allows.  That said, I have been continuing to evolve my methods and reporting techniques, and sometimes, there is no time to create that kind of report -- the team can't wait the days that it takes to take screen shots, go through my notes, refer back to recordings, and write it all up. So in those cases, I use bullet points in email, talk through the findings with stakeholders in a 1-hour meeting, and then post the take-aways on a wiki page. There are other requirements for that kind of reporting to work -- for example, the stakeholders need to attend each of the sessions, and the sessions can't take more than a day to complete, but you get the idea: there is no one "right" way to report out results. If the method of reporting you are using is giving your stakeholders the information they need, in a time frame in which it is useful, and in a format that meets their needs (FDA report or bullet points on a wiki), then that's the "right" way to report your results. 

  Read the article

• Iterative and Incremental Principle Series 4: Iteration Planning – (a.k.a What should I do today?)

  - by llowitz

  Welcome back to the fourth of a five part series on applying the Iteration and Incremental principle.  During the last segment, we discussed how the Implementation Plan includes the number of the iterations for a project, but not the specifics about what will occur during each iteration.  Today, we will explore Iteration Planning and discuss how and when to plan your iterations. As mentioned yesterday, OUM prescribes initially planning your project approach at a high level by creating an Implementation Plan.  As the project moves through the lifecycle, the plan is progressively refined.  Specifically, the details of each iteration is planned prior to the iteration start. The Iteration Plan starts by identifying the iteration goal.  An example of an iteration goal during the OUM Elaboration Phase may be to complete the RD.140.2 Create Requirements Specification for a specific set of requirements.  Another project may determine that their iteration goal is to focus on a smaller set of requirements, but to complete both the RD.140.2 Create Requirements Specification and the AN.100.1 Prepare Analysis Specification.  In an OUM project, the Iteration Plan needs to identify both the iteration goal – how far along the implementation lifecycle you plan to be, and the scope of work for the iteration.  Since each iteration typically ranges from 2 weeks to 6 weeks, it is important to identify a scope of work that is achievable, yet challenging, given the iteration goal and timeframe.  OUM provides specific guidelines and techniques to help prioritize the scope of work based on criteria such as risk, complexity, customer priority and dependency.  In OUM, this prioritization helps focus early iterations on the high risk, architecturally significant items helping to mitigate overall project risk.  Central to the prioritization is the MoSCoW (Must Have, Should Have, Could Have, and Won’t Have) list.   The result of the MoSCoW prioritization is an Iteration Group.  This is a scope of work to be worked on as a group during one or more iterations.  As I mentioned during yesterday’s blog, it is pointless to plan my daily exercise in advance since several factors, including the weather, influence what exercise I perform each day.  Therefore, every morning I perform Iteration Planning.   My “Iteration Plan” includes the type of exercise for the day (run, bike, elliptical), whether I will exercise outside or at the gym, and how many interval sets I plan to complete.    I use several factors to prioritize the type of exercise that I perform each day.  Since running outside is my highest priority, I try to complete it early in the week to minimize the risk of not meeting my overall goal of doing it twice each week.  Regardless of the specific exercise I select, I follow the guidelines in my Implementation Plan by applying the 6-minute interval sets.  Just as in OUM, the iteration goal should be in context of the overall Implementation Plan, and the iteration goal should move the project closer to achieving the phase milestone goals. Having an Implementation Plan details the strategy of what I plan to do and keeps me on track, while the Iteration Plan affords me the flexibility to juggle what I do each day based on external influences thus maximizing my overall success. Tomorrow I’ll conclude the series on applying the Iterative and Incremental approach by discussing how to manage the iteration duration and highlighting some benefits of applying this principle.

  Read the article

• Don't Forget To Enjoy Life

  - by Justin

  I have a pretty clear stance on posting personal information in my blogs. I tend to avoid it almost instinctively. Part of that is because I am a somewhat private person. And the other is because I know how easy it is for personal information to be gathered and collected from sources such as blogs. So, this has remained a tech only blog for me. I've only posted topics mostly related to issues I have encountered at work. In a way this blog is a 'bookmark' for me. If I post something here and run into the issue again it allows me to refer back to a convenient place where the 'fix' is documented in a way that I understand. But today, I am posting something that speaks to everyone. Something PERSONAL. Honestly, I expect this entry to receive zero views. But if nothing else, I can come back to this blog one day when I'm having a bad day or something and run across this post. And I will be reminded... DON'T FORGET TO ENJOY LIFE. Say this to yourself out loud, right now. People, we can get caught up in some rather mundane details as we trek through life. It's so easy to lose track of what really matters that it should be no surprise to find yourself reading something like this and thinking to yourself 'Yeah. You are right, man. Some of this crap I'm clinging on to right now is so small in the grand scheme of things'. I have no reservation, no shame, in saying that I am more often than not caught up in the ever evolving world of 'shit that does not matter'. When you work in technology, you are surrounded by deadlines, upgrades, new versions, support 'end of life', etc. And by time you get done with your 8 hours you go home and put in a few more because you are STILL CAUGHT UP in the things you dealt with at work all day. DO YOURSELF A FAVOR. DO YOUR FAMILY AND FRIEND A FAVOR. When you are done for the day, and you drive home, get those work-related things out of your head before you pull into the driveway. If you are still thinking on them when you park the car, leave the engine running, close your eyes and take a deep breath. If you believe in God, pray. If you don't then meditate for a second with the INTENTION of letting go of the day and becoming the 'real you'. You may have forgotten who the real you is so I'll remind you.... THE REAL YOU IS THAT GUY OR GAL THAT LAUGHS, LOVES, AND LIVES. Be the real you as often as possible. If you can't do it during your 9 - 5, do it at home. YOUR RELATIONSHIPS AND YOUR PERSONAL HAPPINESS DEPEND ON IT. I am going to make you a promise right now. If you do what I've just said, your days will be longer and your joy will be exponential. I can't explain why I know this to be true. But I do know it. And if you are there reading this right now, you know it is true too. We both know it is true because it COMES FROM WITHIN EVERY MAN, WOMAN and CHILD. We are born into love and happiness. Lets not fade away into the darkness so easily found in this world. Lets keep the flame burning. The flame of passion. Passion for LIFE. Peace be with you.

  Read the article

• Hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Working and Studying in Oracle, how I balance my time....

  - by anca.rosu

  Hi, my name is Laura. I am working as an Intern within Executive Administration at Oracle Denmark, whilst studying Information Management at Copenhagen Business school. I have recently handeding a paper on Information Systems which gave me exposure to Oracle. Once completing this paper I came across a job posting on my University’s intranet site and I applied directly online. When I submitted my application for the job offer, I wondered about what language I should use for the application form, as the job posting was in Danish, but the contact person and number looked Irish. I therefore chose English. Later that same day, Fiona, one of Oracle’s Graduates Recruitment Consultants based in Ireland, contacted me. This shows how global Oracle truly is. I went for my face-to-face interview in Oracle Denmark with Charlotte, one of the team managers. I spent 5 minutes waiting in the lobby, just looking around, thinking to myself, I really want to work here. The atmosphere seemed so pleasant with a relaxed approach between colleagues, employees and guests. The interview took about an hour, but we touched on a lot of different subjects. The profile I got of Oraclewas that this is a place where you are encouraged to think for yourself, and you are given the freedom to use your ideas. Later that evening, Fiona called and offered me the job. I was very happy. At Oracle Denmark we have 4 different zones: a Quiet Zone, a Project Zone, a Dialogue Zone and a Call Zone. Everyday when you arrive you consider what will be the most productive for the day’s task, and you take your toolbox and go find a desk in the zone you have decided on. It is therefore very unusual to be next to the same person two days in a row. At Oracle, people are located all over the world, and everybody has team members, colleagues or leaders in other countries, or even other time zones. Initially,I was worried about how I would adapt to this approach but I soon realized I had nothing to worry about and now I appreciate working this way. My colleagues have been very supportive and they have openly welcomed me into my new role. I typically work two days a week and have three days at University. During exam periods, I have the flexibility to work less hours and focus on the exams, in return for putting in more hours at work when needed. The first time I had to ask for time off before handing in a paper, my boss looked at me and said, ”Of course! Your education is the most important!” I hope that by sharing my experiences with you, I can inspire or encourage you to consider Oracle as a potential employer, where you can grow both professionally and personally. If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com Technorati Tags: Intern,Oracle Denmark,Information Systems,Business school,Copenhagen,Graduates Recruitment,Ireland,Quiet Zone,Project Zone,Dialogue Zone,Call Zone,University,flexibility

  Read the article

• Future Of F# At Jazoon 2011

  - by Alois Kraus

  I was at the Jazoon 2011 in Zurich (Switzerland). It was a really cool event and it had many top notch speaker not only from the Microsoft universe. One of the most interesting talks was from Don Syme with the title: F# Today/F# Tomorrow. He did show how to use F# scripting to browse through open databases/, OData Web Services, Sharepoint, …interactively. It looked really easy with the help of F# Type Providers which is the next big language feature in a future F# version. The object returned by a Type Provider is used to access the data like in usual strongly typed object model. No guessing how the property of an object is called. Intellisense will show it just as you expect. There exists a range of Type Providers for various data sources where the schema of the stored data can somehow be dynamically extracted. Lets use e.g. a free database it would be then let data = DbProvider(http://.....); data the object which contains all data from e.g. a chemical database. It has an elements collection which contains an element which has the properties: Name, AtomicMass, Picture, …. You can browse the object returned by the Type Provider with full Intellisense because the returned object is strongly typed which makes this happen. The same can be achieved of course with code generators that use an input the schema of the input data (OData Web Service, database, Sharepoint, JSON serialized data, …) and spit out the necessary strongly typed objects as an assembly. This does work but has the downside that if the schema of your data source is huge you will quickly run against a wall with traditional code generators since the generated “deserialization” assembly could easily become several hundred MB. *** The following part contains guessing how this exactly work by asking Don two questions **** Q: Can I use Type Providers within C#? D: No. Q: F# is after all a library. I can reference the F# assemblies and use the contained Type Providers? D: F# does annotate the generated types in a special way at runtime which is not a static type that C# could use. The F# type providers seem to use a hybrid approach. At compilation time the Type Provider is instantiated with the url of your input data. The obtained schema information is used by the compiler to generate static types as usual but only for a small subset (the top level classes up to certain nesting level would make sense to me). To make this work you need to access the actual data source at compile time which could be a problem if you want to keep the actual url in a config file. Ok so this explains why it does work at all. But in the demo we did see full intellisense support down to the deepest object level. It looks like if you navigate deeper into the object hierarchy the type provider is instantiated in the background and attach to a true static type the properties determined at run time while you were typing. So this type is not really static at all. It is static if you define as a static type that its properties shows up in intellisense. But since this type information is determined while you are typing and it is not used to generate a true static type and you cannot use these “intellistatic” types from C#. Nonetheless this is a very cool language feature. With the plotting libraries you can generate expressive charts from any datasource within seconds to get quickly an overview of any structured data storage. My favorite programming language C# will not get such features in the near future there is hope. If you restrict yourself to OData sources you can use LINQPad to query any OData enabled data source with LINQ with ease. There you can query Stackoverflow with The output is also nicely rendered which makes it a very good tool to explore OData sources today.

  Read the article

• Talking JavaOne with Rock Star Kirk Pepperdine

  - by Janice J. Heiss

  Kirk Pepperdine is not only a JavaOne Rock Star but a Java Champion and a highly regarded expert in Java performance tuning who works as a consultant, educator, and author. He is the principal consultant at Kodewerk Ltd. He speaks frequently at conferences and co-authored the Ant Developer's Handbook. In the rapidly shifting world of information technology, Pepperdine, as much as anyone, keeps up with what's happening with Java performance tuning. Pepperdine will participate in the following sessions: CON5405 - Are Your Garbage Collection Logs Speaking to You? BOF6540 - Java Champions and JUG Leaders Meet Oracle Executives (with Jeff Genender, Mattias Karlsson, Henrik Stahl, Georges Saab) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Ellen Kraffmiller Martijn Verburg, Jeff Genender, and Henri Tremblay) I asked him what technological changes need to be taken into account in performance tuning. “The volume of data we're dealing with just seems to be getting bigger and bigger all the time,” observed Pepperdine. “A couple of years ago you'd never think of needing a heap that was 64g, but today there are deployments where the heap has grown to 256g and tomorrow there are plans for heaps that are even larger. Dealing with all that data simply requires more horse power and some very specialized techniques. In some cases, teams are trying to push hardware to the breaking point. Under those conditions, you need to be very clever just to get things to work -- let alone to get them to be fast. We are very quickly moving from a world where everything happens in a transaction to one where if you were to even consider using a transaction, you've lost." When asked about the greatest misconceptions about performance tuning that he currently encounters, he said, “If you have a performance problem, you should start looking at code at the very least and for that extra step, whip out an execution profiler. I'm not going to say that I never use execution profilers or look at code. What I will say is that execution profilers are effective for a small subset of performance problems and code is literally the last thing you should look at.And what is the most exciting thing happening in the world of Java today? “Interesting question because so many people would say that nothing exciting is happening in Java. Some might be disappointed that a few features have slipped in terms of scheduling. But I'd disagree with the first group and I'm not so concerned about the slippage because I still see a lot of exciting things happening. First, lambda will finally be with us and with lambda will come better ways.” For JavaOne, he is proctoring for Heinz Kabutz's lab. “I'm actually looking forward to that more than I am to my own talk,” he remarked. “Heinz will be the third non-Sun/Oracle employee to present a lab and the first since Oracle began hosting JavaOne. He's got a great message. He's spent a ton of time making sure things are going to work, and we've got a great team of proctors to help out. After that, getting my talk done, the Java Champion's panel session and then kicking back and just meeting up and talking to some Java heads."Finally, what should Java developers know that they currently do not know? “’Write Once, Run Everywhere’ is a great slogan and Java has come closer to that dream than any other technology stack that I've used. That said, different hardware bits work differently and as hard as we try, the JVM can't hide all the differences. Plus, if we are to get good performance we need to work with our hardware and not against it. All this implies that Java developers need to know more about the hardware they are deploying to.”

  Read the article

• Why We Do What We Do. (Part 3 of 5 Part Series on JDE 5G Postponed)

  - by Kem Butller-Oracle

  By Lyle Ekdahl - Oracle JD Edwards Sr. VP General Manager  In the closing of part two of this 5 part blog series, I stated that in the next installment I would explore the expected results of the digital overdrive era and the impact it will have on our economy. While I have full intentions of writing on that topic, I am inspired today to write about something that is top of mind. It’s top of mind because it has come up several times recently conversations with my Oracle’s JD Edwards team members, with customers and our partners, plus I feel passionately about why I do what I do…. It is not what we do but why we do that thing that we do Do you know what you do? For the most part, I bet you could tell me what you do even if your work has changed over the years.  My real question is, “Do you get excited about what you do, and are you fulfilled? Does your work deliver a sense of purpose, a cause to work for, and something to believe in?”  Alright, I guess that was not a single question. So let me just ask, “Why?” Why are you here, right now? Why do you get up in the morning? Why do you go to work? Of course, I can’t answer those questions for you but I can share with you my POV.   For starters, there are several things that drive me. As many of you know by now, I have a somewhat competitive nature but it is not solely the thrill of winning that actually fuels me. Now don’t get me wrong, I do like winning occasionally. However winning is only a potential result of competing and is clearly not guaranteed. So why compete? Why compete in business, and particularly why in this Enterprise Software business?  Here’s why! I am fascinated by creative and building processes. It is about making or producing things, causing something to come into existence. With the right skill, imagination and determination, whether it’s art or invention; the result can deliver value and inspire. In both avocation and vocation I always gravitate towards the create/build processes.  I believe one of the skills necessary for the create/build process is not just the aptitude but also, and especially, the desire and attitude that drives one to gain a deeper understanding. The more I learn about our customers, the more I seek to understand what makes the successful and what difficult issues cause them to struggle. I like to look for the complex, non-commodity process problems where streamlined design and modern technology can provide an easy and simple solution. It is especially gratifying to see our customers use our software to increase their own ability to deliver value to the market. What an incredible network effect! I know many of you share this customer obsession as well as the create/build addiction focused on simple and elegant design. This is what I believe is at the root of our common culture.  Are JD Edwards customers on a whole different than other ERP solutions’ customers? I would argue that for the most part, yes, they are. They selected our software, and our software is different. Why? Because I believe that the create/build process will generally result in solutions that reflect who built it and their culture. And a culture of people focused on why they create/build will attract different customers than one that is based on what is built or how the solution is delivered. In the past I have referred to this idea as character of the customer, and it transcends industry, size and run rate. Now some would argue that JD Edwards has some customers who are characters. But that is for a different post. As I have told you before, the JD Edwards culture is unique, and its resulting economy is valuable and deserving of our best efforts. 

  Read the article

• My collection of favourite TFS utilities

  - by Aaron Kowall

  So, you’re in charge of your company or team’s Team Foundation Server.  Wish it was easier to manage, administer, extend?  Well, here are a few utilities that I highly recommend looking at. I’ve recently had need to rebuild my laptop and upgrade my local TFS environment to TFS 2012 Update 1.  This gave me cause to enumerate some of the utilities I like to have on hand. One of the reasons I love to use TFS on projects is that it’s basically a complete ALM toolkit.  Everything from Task Management, Version Control, Build Management, Test Management, Metrics and Reporting are all there ‘in the box’.  However, no matter how complete a product set it, there are always ways to make it better.  Here are a list of utilities and libraries that are pretty generally useful.  this is not intended to be an exhaustive list of TFS extensions but rather a set that I recommend you look at.  There are many more out there that may be applicable in one scenario or another.  This set of tools should work with TFS 2012 or 2010 if you grab the right version. Most of these tools (and more) are available from the Visual Studio Gallery or CodePlex. General TFS Power Tools – This is ‘the’ collection of utilities and extensions delivered by the Product Group.  Highly recommended from here are the Best Practice Analyzer for ensuring your TFS implementation is healthy and the Team Foundation Server Backups to ensure your TFS databases are backed up correctly. TFS Administrators Toolkit – helps make updates to work item types and reports across many team projects.  Also provides visibility of disk usage by finding large files in version control or test attachments to assist in managing storage utilization. Version Control Git-TF - a set of cross-platform, command line tools that facilitate sharing of changes between TFS and Git. These tools allow a developer to use a local Git repository, and configure it to share changes with a TFS server.  Great for all Git lovers who must integrate into a TFS repository. Testing TFS 2012 Tester Power Tool – A utility for bulk copying test cases which assists in an approach for managing test cases across multiple releases.  A little plug that this utility was written and maintained by Anna Russo of Imaginet where I also work. Test Scribe - A documentation power tool designed to construct documents directly from the TFS for test plan and test run artifacts for the purpose of discussion, reporting etc. Reporting Community TFS Report Extensions - a single repository of SQL Server Reporting Services report for Team Foundation 2010 (and above).  Check out the Test Plan Status report by Imaginet’s Steve St. Jean.  Very valuable for your test managers. Builds TFS Build Manager – A great utility if you are build manager over a complex build environment with many TFS build definitions. Community TFS Build Extensions – contains many custom build activities.  Current release binaries are for TFS 2010 but many of the activities can be recompiled for use with TFS 2012. While compiling this list, I was surprised by the number of TFS utilities and extensions I no longer use/need in TFS 2012 because of the great work by the TFS team addressing many gaps since the 2010 release. Are there any utilities you depend on that I’ve missed?  I’d love to hear about them in the comments!

  Read the article

• What Color is your Jetpack ?

  - by JoshReuben

  I’m a programmer, Im approaching 40, and I’m fairly decent at my job – I’ll keep doing what I’m doing for as long as they let me!   So what are your career options if you know how to code? A Programmer could be ..   An Algorithm developer Pros Interesting High barriers of entry, potential for startup competitive factor Cons Do you have the skill, qualifications? What are working conditions n this mystery niche ? micro-focus An Academic Pros Low pressure Job security – or is this an illusion ? Cons Low Pay Need a PhD A Software Architect Pros: strategic, rather than tactical Setting technology platform and high level vision You say how it should work, others have to figure out why its not working the way its supposed to ! broad view – you are paid to learn (how do you con people into paying for you to learn ??) Cons: Glorified developer – more often than not! competitive – everyone wants to do it ! loose touch with underlying tech in tough times, first guy to get the axe ! A Software Engineer Pros: interesting, always more to learn fun I can do it Fallback Cons: Nothing new under the sun – been there, done that Dealing with poor requirements, deadlines, other peoples code, overtime C#, XAML, Web - Low barriers of entry –> à race to the bottom A Team leader Pros: Setting code standards and proposing technology choices Cons: Glorified developer – more often than not! Inspecting other peoples code and debugging the problems they cannot fix Dealing with mugbies and prima donas Responsible for QA of others A Project Manager Pros No need for debugging other peoples code Cons Low barrier of entry High pressure Responsible for QA of others Loosing touch with technology A lot of bullshit meetings Have to be an asshole A Product Manager Pros No need for debugging other peoples code Learning new skillset of sales and marketing Cons Travel (I'm a family man) May need to know the bs details of an uninteresting product things I want to work with: AI, algorithms, Numerical Computing, Mathematica, C++ AMP – unfortunately, the work here is few & far between. VS & TFS Extensibility, DSLs (Workflow , Lightswitch), Code Generation – one day, code will write code ! Unity3D, WebGL – fun, fun, fun ! Modern Web – Knockout, SignalR, MVC, Node.Js ??? (tentative – I'll wait until things stabilize as this area is undergoing a pre-Cambrian explosion) Things I don’t want to work with: (but will if I'm asked to !) C# – same old, same old – not learning anything new here Old code – blech ! Environment with code & fix mentality , ad hoc requirements, excessive overtime Pc support, System administration – even after 20 years, people still ask you to do this sometimes ! debugging – my skills are just not there yet Oracle Old tech: VB 6, XSLT, WinForms, Net 3.51 or less Old style Web dev Information Systems: ASP.NET webforms, Reporting services / crystal reports, SQL Server CRUD with manual data layer, XAML MVVM – variations of the same concept, ad nauseaum. Low barriers of entry –> race to the bottom.  Metro – an elegant API coupled to a horrendous UX – I'll wait for market penetration viability before investing further in this.   Conclusion So if you are in a slump, take heart: Programming is a great career choice compared to every other job !

  Read the article

• Rotation of viewplatform in Java3D

  - by user29163

  I have just started with Java3D programming. I thought I had built up some basic intuition about how the scene graph works, but something that should work, does not work. I made a simple program for rotating a pyramid around the y-axis. This was done just by adding a RotationInterpolator R to the TransformGroup above the pyramid. Then I thought hey, can I now remove the RotationInterpolator from this TransformGroup, then add it to the TransformGroup above my ViewPlatform leaf. This should work if I have understood how things work. Adding the RotationInterpolator to this TransformGroup, should make the children of this TransformGroup rotate, and the ViewingPlatform is a child of the TransformGroup. Any ideas on where my reasoning is flawed? Here is the code for setting up the universe, and the view branchgroup. import java.awt.*; import java.awt.event.*; import javax.media.j3d.*; import javax.vecmath.*; public class UniverseBuilder { // User-specified canvas Canvas3D canvas; // Scene graph elements to which the user may want access VirtualUniverse universe; Locale locale; TransformGroup vpTrans; View view; public UniverseBuilder(Canvas3D c) { this.canvas = c; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view = new View(); view.addCanvas3D(c); view.setPhysicalBody(body); view.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); Transform3D s = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 10.0f)); t.rotX(-Math.PI/4); s.set(new Vector3f(0.0f, 0.0f, 10.0f)); //forandre verdier her for å endre viewing position t.mul(s); ViewPlatform vp = new ViewPlatform(); vpTrans = new TransformGroup(t); vpTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); // Rotator stuff Transform3D yAxis = new Transform3D(); //yAxis.rotY(Math.PI/2); Alpha rotationAlpha = new Alpha( -1, Alpha.INCREASING_ENABLE, 0, 0,4000, 0, 0, 0, 0, 0); RotationInterpolator rotator = new RotationInterpolator( rotationAlpha, vpTrans, yAxis, 0.0f, (float) Math.PI*2.0f); RotationInterpolator rotator2 = new RotationInterpolator( rotationAlpha, vpTrans); BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 1000.0); rotator.setSchedulingBounds(bounds); vpTrans.addChild(rotator); vpTrans.addChild(vp); vpRoot.addChild(vpTrans); view.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } public void addBranchGraph(BranchGroup bg) { locale.addBranchGraph(bg); } }

  Read the article

• Dont Throw Duplicate Exceptions

  In your code, youll sometimes have write code that validates input using a variety of checks.  Assuming you havent embraced AOP and done everything with attributes, its likely that your defensive coding is going to look something like this: public void Foo(SomeClass someArgument) { if(someArgument == null) { throw new InvalidArgumentException("someArgument"); } if(!someArgument.IsValid()) { throw new InvalidArgumentException("someArgument"); }   // Do Real Work } Do you see a problem here?  Heres the deal Exceptions should be meaningful.  They have value at a number of levels: In the code, throwing an exception lets the develop know that there is an unsupported condition here In calling code, different types of exceptions may be handled differently At runtime, logging of exceptions provides a valuable diagnostic tool Its this last reason I want to focus on.  If you find yourself literally throwing the exact exception in more than one location within a given method, stop.  The stack trace for such an exception is likely going to be identical regardless of which path of execution led to the exception being thrown.  When that happens, you or whomever is debugging the problem will have to guess which exception was thrown.  Guessing is a great way to introduce additional problems and/or greatly increase the amount of time require to properly diagnose and correct any bugs related to this behavior. Dont Guess Be Specific When throwing an exception from multiple code paths within the code, be specific.  Virtually ever exception allows a custom message use it and ensure each case is unique.  If the exception might be handled differently by the caller, than consider implementing a new custom exception type.  Also, dont automatically think that you can improve the code by collapsing the if-then logic into a single call with short-circuiting (e.g. if(x == null || !x.IsValid()) ) that will guarantee that you cant easily throw different information into the message as easily as constructing the exception separately in each case. The code above might be refactored like so:   public void Foo(SomeClass someArgument) { if(someArgument == null) { throw new ArgumentNullException("someArgument"); } if(!someArgument.IsValid()) { throw new InvalidArgumentException("someArgument"); }   // Do Real Work } In this case its taking advantage of the fact that there is already an ArgumentNullException in the framework, but if you didnt have an IsValid() method and were doing validation on your own, it might look like this: public void Foo(SomeClass someArgument) { if(someArgument.Quantity < 0) { throw new InvalidArgumentException("someArgument", "Quantity cannot be less than 0. Quantity: " + someArgument.Quantity); } if(someArgument.Quantity > 100) { throw new InvalidArgumentException("someArgument", "SomeArgument.Quantity cannot exceed 100. Quantity: " + someArgument.Quantity); }   // Do Real Work }   Note that in this last example, Im throwing the same exception type in each case, but with different Message values.  Im also making sure to include the value that resulted in the exception, as this can be extremely useful for debugging.  (How many times have you wished NullReferenceException would tell you the name of the variable it was trying to reference?) Dont add work to those who will follow after you to maintain your application (especially since its likely to be you).  Be specific with your exception messages follow DRY when throwing exceptions within a given method by throwing unique exceptions for each interesting case of invalid state. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >