Search Results

Search found 9254 results on 371 pages for 'approach'.

Page 275/371 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• What is the fastest way to pull a few element values out of XML files in Perl?

  - by Anon Guy

  I have a bunch of XML files that are about 1-2 megabytes in size. Actually, more than a bunch, there are millions. They're all well-formed and many are even validated against their schema (confirmed with libxml2). All were created by the same app, so they're in a consistent format (though this could theoretically change in the future). I want to check the values of one element in each file from within a Perl script. Speed is important (I'd like to take less than a second per file) and as noted I already know the files are well-formed. I am sorely tempted to simply 'open' the files in Perl and scan through until I see the element I am looking for, grab the value (which is near the start of the file), and close the file. On the other hand, I could use an XML parser (which might protect me from future changes to the XML formatting) but I suspect it will be slower than I'd like. Can anyone recommend an appropriate approach and/or parser? Thanks in advance.

  Read the article

• Bubble Breaker Game Solver better than greedy?

  - by Gregory

  For a mental exercise I decided to try and solve the bubble breaker game found on many cell phones as well as an example here:Bubble Break Game The random (N,M,C) board consists N rows x M columns with C colors The goal is to get the highest score by picking the sequence of bubble groups that ultimately leads to the highest score A bubble group is 2 or more bubbles of the same color that are adjacent to each other in either x or y direction. Diagonals do not count When a group is picked, the bubbles disappear, any holes are filled with bubbles from above first, ie shift down, then any holes are filled by shifting right A bubble group score = n * (n - 1) where n is the number of bubbles in the bubble group The first algorithm is a simple exhaustive recursive algorithm which explores going through the board row by row and column by column picking bubble groups. Once the bubble group is picked, we create a new board and try to solve that board, recursively descending down Some of the ideas I am using include normalized memoization. Once a board is solved we store the board and the best score in a memoization table. I create a prototype in python which shows a (2,15,5) board takes 8859 boards to solve in about 3 seconds. A (3,15,5) board takes 12,384,726 boards in 50 minutes on a server. The solver rate is ~3k-4k boards/sec and gradually decreases as the memoization search takes longer. Memoization table grows to 5,692,482 boards, and hits 6,713,566 times. What other approaches could yield high scores besides the exhaustive search? I don't seen any obvious way to divide and conquer. But trending towards larger and larger bubbles groups seems to be one approach Thanks to David Locke for posting the paper link which talks above a window solver which uses a constant-depth lookahead heuristic.

  Read the article

• Javascript: Controlling the order that event handlers / listeners are exeucted in

  - by LRE

  Once again the IE Monster has hit me with an odd problem. I'm writing some changes into an asp.net site I inherited a while back. One of the problems is that in some pages there are several controls that add javascript functions as handlers to the onload event (using YUI if that matters). Some of those event handlers assume certain other functions have been executed. This is well and good in Firefox and IE7 as the handlers seem to execute in order of registration. IE8 on the other hand does this backwards. I could go with some kind of double-checking approach but given the controls are present in several pages I feel that'd create even more dependencies. So I've started cooking up my own queue class that I push the functions to and can control their execution order. Then I'll register an onload handler that instructs the queue to execute in my preferred order. I'm part way through that and have started wondering 2 things: Am I going OTT? Am I reinventing the wheel? Anyone have any insights? Any clean solutions that allow me to easily enforce execution order?

  Read the article

• MonoRail: Testing, Route Extensions, Folder Structures

  - by Kezzer

  I've got a few questions related to the use of MonoRail Testing Does everyone tend to use NUnit for their testing? I haven't worked enough with testing to know if this is a good testing framework to use. I'm just looking to get more into testing my applications a lot more than before and wanted to know if there's any general guidelines. Are you supposed to copy the controller over to a test area and just rename it with test in the name and re-run it? How do you ensure your test project and main project coincide with one another? Is it just a case of copying everything over again or are there tools available to do it for you? Route Extensions MonoRail tends to use <action>.rails, can you omit the .rails part if you configure your routing correctly? Why does this seem to be the standard? Folder Structures I haven't found anywhere which really points out your standard folder structure. Sure, you have Controllers, Models, and Views. But your Models folder should contain your data access objects as well. I've seen some have something like -> Models -> DaoClasses -> Entities But what about custom structures used to get data out of views? And if you're using NHibernate, where's a good place to stick the mappings? I know it's entirely dependent on the developer, but I haven't really seen any standard approach. Cheers

  Read the article

• Help with Android LinearLayout or RelativeLayout

  - by PeEll

  I need to create two views programmatically (because I need to access the ondraw of one of the views). For some reason, no matter what I do to add the views to the contentview, they don't show up vertically stacked, one below the other. I can do it just fine using the XML using a RelativeLayout and layout positioning, but with the XML I can't create a view object and overload the ondraw method. What am I doing wrong with the programmatic approach, and how do I solve this problem? LinearLayout mLinearLayout; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // Create a LinearLayout in which to add the ImageView mLinearLayout = new LinearLayout(this); TextView tv = new TextView(this); tv.setBackgroundColor(0xff333333); tv.setText("Enter your member number:"); tv.setLayoutParams(new ViewGroup.LayoutParams(LayoutParams.FILL_PARENT,LayoutParams.WRAP_CONTENT)); DrawableView i = new DrawableView(this); i.layout(0,40,0,0); i.setLayoutParams(new Gallery.LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.WRAP_CONTENT)); mLinearLayout.addView(tv); mLinearLayout.addView(i,300,300); setContentView(mLinearLayout); }

  Read the article

• Maintaining a Python web application: heavier vs lighter framework?

  - by Tiberiu Ana

  Five+ years from now, you are hired to support and extend a data-centric web application written in Python that hasn't been kept up to date. Would you rather prefer it was written in the current version of Django/Pylons at the time, using the available standard components, or kept minimal with something like CherryPy/web.py and a few library dependencies? Heavy framework Advantages: standard approach to application design and structure, as encouraged by framework; less application code to worry about. Disadvantages: requires learning the framework to understand how things work; broken things in old version of framework difficult to fix; upgrading to new version potentially difficult due to changing APIs; finding relevant documentation/help potentially difficult due to changing APIs. Light framework Advantages: most application code is directly "visible"; only needed features are implemented; architecture should be simpler to understand; less need to upgrade external dependencies; easier to upgrade external dependencies. Disadvantages: some reinventing the wheel; non-standard design and structure (with the associated unique issues and bugs). I will update the list with any helpful answers.

  Read the article

• No Commons Logging in Android?

  - by Joe Boese

  Hello all, I have a pretty big library I developed specifically for use in my Android Application. However business logic itself has no dependency on Android. To preserve that, I used Commons Logging throughout this library and it's respective JUnit tests (which I run in Eclipse). However now that I am starting to integrate it into an Activity which I launch on Android, I am unable to get my logging to work. In Eclipse/JUnit, I had simply pulled in log4j's jar file as well as a log4j.properties file. This doesn't seem to work when deploying to a device. After struggling with attempting to get that to work for several hours, I gave up and tried replacing all my commons logging stuff with android.util.Log. Now I can log on the device.. but all JUnit tests are broken. When any JUnit tries to log using android.util.Log, it throws a RuntimeException 'Stub!'. I would prefer to revert to my commons logging approach.. if anyone can help with that.. otherwise.. what can I do to get my JUnit test cases running using 'android.util.Log'? Many thanks in advance.. I've spent more than a few hours on this and I'd like to move on to writing real code again! Joe

  Read the article

• How do I use an SWT Control to render the content of an SWT/JFace table?

  - by jastram

  I have a JFace TableViewer with an SWT Table, and I would like to custom render the content of some cells. I would like to use an SWT Control to render the cell content. I would prefer to have only one instance of the Control doing the rendering, but if I have to instantiate one for each row, that would be acceptable. Next, the solution MUST be compatible with the ContentProvider/LabelProvider approach (I am using EMF). This means that I cannot use the solution described in Sniplet 126 (http://dev.eclipse.org/viewcvs/index.cgi/org.eclipse.swt.snippets). Next, I though about using custom drawing. But here the catch is, that I have to send individual drawing operations to the graphics context. I was trying to have the Control render the content for me by calling redraw() or print(GC) upon SWT.PaintItem, but that just lead to uncontrollable flickering. At this point, my best guess is to use SWT.PaintItem to do the drawing. This will result in duplicate code, as I already have a Control that can render the content the way I'd like it. I'd like to prevent this redundancy. Any help is appreciated!

  Read the article

• how to make a explorer like logic in Obj C for iphone

  - by Ekra

  Hi friends, To make the query simple first we can take example:- If we open the explorer in our Windows desktop how it shows us the tree. As we keep on clicking the tree it get expanded and shows the file in it. The same way I want to show a explorer which gets expanded as the user clicks on it(I want to get the business logic the UI is simple). The information of the explorer i.e. which folder has what files come in a XML format to me. I have 2 options of getting the XML either I can get the whole XML at one query(but I guess this might slow the application if the XML is quite big). OR I can get the XML for every list like first only the root structure then if user clicks on any folder in root I can get the list(the files or folders inside that folder) of that particular folder. Now the question is What would be the approach to implement both the method and which would be the best. Should I need to create some dictionary to maintain the link of the files like which file is inside what. I am not able to get as how I would be able to link all the files. Any hint or direction would be highly appreciated. Thanks in advance

  Read the article

• Saving/Associating slider values with a pop-up menu

  - by James

  Hi, Following on from a question I posted yesterday about GUIs, I have another problem I've been working with. This question related to calculating the bending moment on a beam under different loading conditions. On the GUI I have developed so far, I have a number of sliders (which now work properly) and a pop-up menu which defines the load case. I would like to be able to select the load case from the pop-up menu and position the loads as appropriate, in order to define each load case in turn. The output that I need is an array defining the load case number (the rows) and a number of loading parameters (the itensity and position of the loads, which are controlled by the sliders). The problem I am having is that I can produce this array (of the size I need) and define the loading for one load case (by selecting the pop-up menu) using the sliders, but when I change the popup menu again, the array only keeps the loading for the load case selected by the pop-up menu. Can anyone suggest an approach I can take with (specifically to store the variables from each load case) or an example that illustrates a similar solution to the problem? The probem may be a bit vague, so please let me know if anything needs clearing up. Many Thanks, James

  Read the article

• Why Does the iPad Main View Refuse to go FullScreen?

  - by dugla

  I am doing an imaging app for iPad and it requires use of the entire screen. The approach I have used on iPhone does not appear to work on iPad. In Interface Builder I have set the UIToolbar to translucent.This code echos the dimensions of the main view before and after requesting fullscreen. (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { [self.window addSubview:self.viewController.view]; NSLog(@"Hello Popover AD - application did Finish Launching With Options - viewSize: %f %f BEFORE", self.viewController.view.bounds.size.width, self.viewController.view.bounds.size.height); [self.viewController setWantsFullScreenLayout:YES]; [self.viewController.view layoutIfNeeded]; NSLog(@"Hello Popover AD - application did Finish Launching With Options - viewSize: %f %f AFTER", self.viewController.view.bounds.size.width, self.viewController.view.bounds.size.height); [self.window makeKeyAndVisible]; return YES; } This is what NSlog has to say: Hello Popover AD - application did Finish Launching With Options - viewSize: 768 1004 BEFORE Hello Popover AD - application did Finish Launching With Options - viewSize: 768 1004 AFTER Can someone please tell me what I am doing incorrectly here? Note, on iPhone I set fullscreen within the init method of the relevant ViewController. Can view resizing only be done in a ViewController? My ultimate goal is a fullscreen view nicely tucked underneath a translucent status bar and tool bar. I will retract the status/tool bars when user interaction begins in the main view. Thanks, Doug

  Read the article

• C# Switch-case Loop for Datagridview cells

  - by Nail Yener

  Hi, I am working on a form with datagridview and webbrowser controls. I have three columns as URL, username and password in datagridview. What I want to do is to automate the login for some websites that I use frequently. For that reason I am not sure if this is the right approach but I created the below code. The problem is with the argument of switch. I will click the row on datagridview and then click the login_button so that the username and password info will be passed to the related fields on the webpage. Why I need a switch-case loop is because all the webpages have different element IDs for username and password fields. As I said, I am not sure if datagridview allows switch-case, I searched the net but couldn't find any samples. private void login_button_Click(object sender, EventArgs e) { switch (dataGridView1.Rows[e.RowIndex].Cells[e.ColumnIndex].Value.ToString()) { case "http://www.website1.com": webBrowser1.Document.GetElementById("username").InnerText = dataGridView1.Rows[3].Cells[3].Value.ToString(); webBrowser1.Document.GetElementById("password").InnerText = dataGridView1.Rows[3].Cells[4].Value.ToString(); return; case "http://www.website2.com": webBrowser1.Document.GetElementById("uname").InnerText = dataGridView1.Rows[4].Cells[3].Value.ToString(); webBrowser1.Document.GetElementById("pswd").InnerText = dataGridView1.Rows[4].Cells[4].Value.ToString(); return; } HtmlElementCollection elements = this.webBrowser1.Document.GetElementsByTagName("Form"); foreach (HtmlElement currentElement in elements) { currentElement.InvokeMember("Login"); } }

  Read the article

• Distance between Long Lat coord using SQLITE

  - by munchine

  I've got an sqlite db with long and lat of shops and I want to find out the closest 5 shops. So the following code works fine. if(sqlite3_prepare_v2(db, sqlStatement, -1, &compiledStatement, NULL) == SQLITE_OK) { while (sqlite3_step(compiledStatement) == SQLITE_ROW) { NSString *branchStr = [NSString stringWithUTF8String:(char *)sqlite3_column_text(compiledStatement, 0)]; NSNumber *fLat = [NSNumber numberWithFloat:(float)sqlite3_column_double(compiledStatement, 1)]; NSNumber *fLong = [NSNumber numberWithFloat:(float)sqlite3_column_double(compiledStatement, 2)]; NSLog(@"Address %@, Lat = %@, Long = %@", branchStr, fLat, fLong); CLLocation *location1 = [[CLLocation alloc] initWithLatitude:currentLocation.coordinate.latitude longitude:currentLocation.coordinate.longitude]; CLLocation *location2 = [[CLLocation alloc] initWithLatitude:[fLat floatValue] longitude:[fLong floatValue]]; NSLog(@"Distance i meters: %f", [location1 getDistanceFrom:location2]); [location1 release]; [location2 release]; } } I know the distance from where I am to each shop. My question is. Is it better to put the distance back into the sqlite row, I have the row when I step thru the database. How do I do that? Do I use the UPDATE statement? Does someone have a piece of code to help me. I can read the sqlite into an array and then sort the array. Do you recommend this over the above approach? Is this more efficient? Finally, if someone has a better way to get the closest 5 shops, love to hear it.

  Read the article

• custom C++ boost::lambda expression help

  - by aaa

  hello. A little bit of background: I have some strange multiple nested loops which I converted to flat work queue (basically collapse single index loops to single multi-index loop). right now each loop is hand coded. I am trying to generalized approach to work with any bounds using lambda expressions: For example: // RANGE(i,I,N) is basically a macro to generate `int i = I; i < N; ++i ` // for (RANGE(lb, N)) { // for (RANGE(jb, N)) { // for (RANGE(kb, max(lb, jb), N)) { // for (RANGE(ib, jb, kb+1)) { // is equivalent to something like (overload , to produce range) flat<1, 3, 2, 4>((_2, _3+1), (max(_4,_3), N), N, N) the internals of flat are something like: template<size_t I1, size_t I2, ..., class L1_, class L2, ..._> boost::array<int,4> flat(L1_ L1, L2_ L2, ...){ //boost::array<int,4> current; class variable bool advance; L2_ l2 = L2.bind(current); // bind current value to lambda { L1_ l1 = L1.bind(current); //bind current value to innermost lambda l1.next(); advance = !(l1 < l1.upper()); // some internal logic if (advance) { l2.next(); current[0] = l1.lower(); } } //..., } my question is, can you give me some ideas how to write lambda (derived from boost) which can be bound to index array reference to return upper, lower bounds according to lambda expression? thank you much

  Read the article

• Low Latency Serial Communications In .Net

  - by bvillersjr

  I have been researching various third party libraries and approaches to low latency serial communications in .Net. I've read enough that I have now come full circle and know as little as I did when I started due to the variety of conflicting opinions. For example, the functionality in the Framework was ruled out due to some convincing articles stating: "that the Microsoft provided solution has not been stable across framework versions and is lacking in functionality." I have found articles bashing many of the older COM based libraries. I have found articles bashing the idea of a low latency .Net app as a whole due to garbage collection. I have also read articles demonstrating how P/Invoking Windows API functionality for the purpose of low latency communication is unacceptable. THIS RULES OUT JUST ABOUT ANY APPROACH I CAN THINK OF! I would really appreciate some words from those with been there / done that experience. Ideally, I could locate a solid library / partner and not have to build the communications library myself. I have the following simple objectives: Sustained low latency serial communication in C# / VB.Net 32/64 bit Well documented (if the solution is 3rd party) Relatively unimpacted (communication and latency wise) by garbage collection . Flexible (I have no idea what I will have to interface with in the future!) The only requirement that I have for certain is that I need to be able to interface with many different industrial devices such as RS485 based linear actuators, serial / microcontroller based gauges, and ModBus (also RS485) devices. Any comments, ideas, thoughts or links to articles that may iron out my confusion are much appreciated!

  Read the article

• Specifying ASP.NET MVC attributes for auto-generated data models

  - by Lyubomyr Shaydariv

  Hello to everyone. I'm very new to ASP.NET MVC (as well as ASP.NET in general), and going to gain some knowledge for this technology, so I'm sorry I can ask some trivial questions. I have installed ASP.NET MVC 3 RC1 and I'm trying to do the following. Let's consider that I have a model that's completely auto-generated from a table using the "LINQ to SQL Classes" template in VS2010. The template generates 3 files (two .cs files and one .layout file respectively), and the generated partial class is expected to be used as an MVC model. Let's also consider, a single DB column, that's mapped into the model, may look like this: [global::System.Data.Linq.Mapping.ColumnAttribute(Storage = "_Name", DbType = "VarChar(128)")] public string Name { get { return this._Name; } set { if ( (this._Name != value) ) { // ... generated stuff goes here } } } The ASP.NET MVC engine also provides a beautiful declarative way to specify some additional stuff, like RequiredAttribute, DisplayNameAttribute and other nice attributes. But since the mapped model is a purely auto-genereated model, I've realized that I should not change the model manually, and specify the fields like: [Required] [DisplayName("Project name")] [StringLength(128)] [global::System.Data.Linq.Mapping.ColumnAttribute(Storage = "_Name", DbType = "VarChar(128)")] public string Name { ... though this approach works perfectly... until I change the model in the DBML-designer removing the ASP.NET MVC attributes automatically. So, how do I specify ASP.NET MVC attributes for the DBML models and their fields safely? Thanks in advance, and Merry Christmas.

  Read the article

• Adapting existing HTML/Javascript model to Titanium's latest release (v 0.9)

  - by Alan Neal

  In pre-0.9 versions of Titanium, one could simply specify an .html file (local or remote) in the tiapp.xml file and interact with it in the same manner as one would on a website. As of version 0.9, that is no the longer case. One creates their entire app dynamically. Unfortunately, this broke my previous implementation and, other than an updated Kitchen Sink, much of the new model and API calls are not covered in the documentation (e.g., createLabel). So, my question is this... What are the simplest steps for re-creating the previous effect (knowingly forgoing some of the advantages of the Titanium's latest approach if necessary)? My previous implementation was exactly as it functions on the website. The website has a single index.html file with no content other than links to JavaScript and style files. The document body's onload event called the first JavaScript function (located in the main script) and, from that point forth, the entire content was dynamically created. How can I set up the latest version of Titanium so that I am poised to do the exact same thing? BTW: Whereas I previously had the choice to keep the files local or remote, I don't believe that remote access (e.g., simply using the webView widget to point to the website) is viable. That's because pages displayed via the webView do not have access to most of the API. Since the iPhone and Safari browsers do not support the file input type, the only means for uploading files (something my app requires) is calling Titanium's function. Thanks in advance.

  Read the article

• How to Create Deterministic Guids

  - by desigeek

  In our application we are creating Xml files with an attribute that has a Guid value. This value needed to be consistent between file upgrades. So even if everything else in the file changes, the guid value for the attribute should remain the same. One obvious solution was to create a static dictionary with the filename and the Guids to be used for them. Then whenever we generate the file, we look up the dictionary for the filename and use the corresponding guid. But this is not feasible coz we might scale to 100's of files and didnt want to maintain big list of guids. So another approach was to make the Guid the same based on the path of the file. Since our file paths and application directory structure are unique, the Guid should be unique for that path. So each time we run an upgrade, the file gets the same guid based on its path. I found one cool way to generate such 'Deterministic Guids' (Thanks Elton Stoneman). It basically does this: private Guid GetDeterministicGuid(string input) { //use MD5 hash to get a 16-byte hash of the string: MD5CryptoServiceProvider provider = new MD5CryptoServiceProvider(); byte[] inputBytes = Encoding.Default.GetBytes(input); byte[] hashBytes = provider.ComputeHash(inputBytes); //generate a guid from the hash: Guid hashGuid = new Guid(hashBytes); return hashGuid; } So given a string, the Guid will always be the same. Are there any other approaches or recommended ways to doing this? What are the pros or cons of that method?

  Read the article

• ajax delay load UserControl asp.net

  - by user196202

  regarding ajax delay load of usercontrols (or any controls) on Post at Encosia.com : http://encosia.com/2008/02/05/boost-aspnet-performance-with-deferred-content-loading/ I tried to implement it , but I noticed that it can be done only for simple controls or UserControls that Have simple asp.net controls (or html tags) . But when it involved with advanced dynamic ajax control (like ajaxControlToolkit or Telerik controls) that have javascripts inside them This method of injecting the html code to the .InnerHtml property of div tag (for example) IS NOT WORKING , and I red about it that The browser need to load the script on load and after that it won't iterperate the scripts injectd via .InnerHtml. So I attached here example of delay load project (from encosia.com by dave ward) with my modification (look at DefaultPopup.aspx and beforePopup.aspx and AfterPopup.aspx) Which I modified the RssReader to show listview with popup items (which is implemented via ACT HoverMenuExtender ) So in the regular way the popup items are shown right , but on the delay load which is done by creating virtual page for rendering the html and injecting it to .InnerHtml property – This ISN'T WORKING. So my question is : is there a way to do delay loading for controls which include scripts lik ACT and Telerik and others? And for the ajax templates – if I need to inject advanced control to the page – how I do it with your approach? Thanks very much (I can't attach here files so everyone please ask me by mail ([email protected]) and i'll send it to him. ) Zahi Kramer

  Read the article

• c# (wcf) architecture file and directory structure (and instantiation)

  - by stevenrosscampbell

  Hello and thanks for any assistance. I have a wcf service that I'm trying to properly modularize. I'm interested in finding out if there is a better way or implementing the file and directory structure along with instanciatation, is there a more appropriate way of abstraction that I may be missing? Is this the best approach? especially if performance and the ability to handle thousands of simultanious request? Currently I have this following structure: -Root\Service.cs public class Service : IService { public void CreateCustomer(Customer customer) { CustomerService customerService = new CustomerService(); customerService.Create(customer); } public void UpdateCustomer(Customer customer) { CustomerService customerService = new CustomerService(); customerService.Update(customer); } } -Root\Customer\CustomerService.cs pulbic class CustomerService { public void Create(Customer customer) { //DO SOMETHING } public void Update(Customer customer) { //DO SOMETHING } public void Delete(int customerId) { //DO SOMETHING } public Customer Retrieve(int customerId) { //DO SOMETHING } } Note: I do not include the Customer Object or the DataAccess libraries in this example as I am only concerned about the service. If you could either let me know what you think, if you know a better way, or a resource that could help out. Thanks Kindly. Steven

  Read the article

• How to handle custom Java exception in Flex app.

  - by mico

  Hello, we are using BlazeDS as a proxy between Flex and Java. The approach is the same as in (http://www.flexpasta.com/index.php/2008/05/16/exception-handling-with-blazeds-and-flex/) Java exception declaration: public class FlexException extends RuntimeException { private String name = 'John'; public FlexException(String message) { super(message); } public String getName() { return name; } } Then, we are throwing it: public void testMethod(String str) throws Exception { throw new FlexException("Custom exception"); } Flex part: private function faultHandler(event:FaultEvent):void { var errorMessage:ErrorMessage = event.message as ErrorMessage; trace("error++"); } and remote object is instantiated here: <mx:RemoteObject id="mySample" destination="mySample" channelSet="{cs1}" fault="faultHandler(event)" /> But in event.fault I get "Server.Processing" and event.faultString equals "There was an unhandled failure on the server. Custom exception" How can I receive the data is specified in exception props ? BlazeDS log is similar to the log that was mentioned in the comment [BlazeDS] 11:28:13.906 [DEBUG] Serializing AMF/HTTP response Version: 3 (Message #0 targetURI=/2/onStatus, responseUR|-) (Typed Object #0 ‘flex.messaging.messages.ErrorMessage’) headers = (Object #1) rootCause = null body = null correlationId = “2F1126D7-5658-BE40-E27C-7B43F3C5DCDD” faultDetail = null faultString = “Login required before authorization can proceed.” clientId = “C4F0E77C-3208-ECDD-1497-B8D070884830? timeToLive = 0.0 destination = “books” timestamp = 1.204658893906E12 extendedData = null faultCode = “Client.Authentication” messageId = “C4F0E77C-321E-6FCE-E17D-D9F1C16600A8? So the quesion is why rootClause is null? How can I get that Exception object not just a string 'Custom exception'?

  Read the article

• Need help with creating complex UITableView items (like the Settings app).

  - by Craig

  I hoping to create a custom Settings view, similar to the Settings application, but with more control over the UI and access to some settings (i need to lock some of the settings). Obvously, there are a variety of UI elements mixed in each row of application's UITableView. For example, the 'Airplane Mode' setting shows a UISwitch, while the 'Wi-Fi' setting has a text value adjacent to the disclosure symbol (''). Further complicating matters, is the grouping of these settings. I have some general questions about the approach I should take: Seems like i need to save the name of the setting, its current value, its grouping, and the type of UI element(s) needed to modify its value. i would like to make use [NSUserDefault standardUserDefaults], but not have these settings appear in the Settings application. I'm guessing that I will need to create my own settings-persistence class. is it better to build each one of these complex UI-element combinations in code or to create a series of custom views based on the UITableViewCell and load the appropriate one? i'm guessing the latter. some of the setting require that i load another view to select its value. assuming that the application is based on the Utility pattern, should the SettingsView manage the navigation stack, rather than having the app delegate do so? Thanks for your time and comments. Craig Buchanan

  Read the article

• Linking session state between servlets and EJBs?

  - by wilth

  Hello, I have servlets (in a web module) that access stateless EJB beans (in an EJB module). The EJB module is built using SEAM. Users can have different roles and the EJB services check this using Seam's Identity. I also use a customized Authenticator (although this might not be relevant here). I noticed problems with this approach and I'm suspecting that the session context in the servlets is not "linked" with the session context in the EJB beans. What I think happens is something like: User Joe access servlet A and is assigned Session W1. Servlet A calls a login function on an EJB, using the EJB session E1. Later, user Mary accesses servlet A and is assigned Session W2. When calling the EJBs, however, the EJB session E1 is used and therefore Mary is authenticated as Joe. What also happens is that when Joe is calling the servlet twice in rapid succession, the same session W1 is used, but two different sessions E1 and E2 in the business layer, causing errors. I might be wrong in my suspicion, but maybe I'm actually expecting these "sessions" to be linked together while they in fact are not. If this is true, is there any way of achieving this? I could - of course - use stateful beans and save the authentication information in the beans, but this would break the "Identity" concept of Seam (and in general, it would be preferable to be able to use the Session context in my EJB beans). Any help and pointers are very welcome - thanks! Technology: EJB3, Seam 2.1.2. The servlets are actually the server-side of a GWT app, although I don't think this matters much. I'm using JBoss 5.

  Read the article

• Parsing Line Breaks in PHP/JavaScript

  - by Matt G

  I have a text area in my PHP application where users can enter notes in a project. Sometimes this is displayed on the page via PHP and sometimes it is displayed via javascript. The problem is, if the note is across multiple lines (i.e. the user presses enter while entering notes in the text area), it causes the JS to fail. It's fine when it's being done by the PHP. The line of code in question is: var editnotes='<textarea class="desc_text" style="width:20em;" id="notes_editor"><?php print $notes; ?></textarea>'; So, if the note is over multiple lines, the PHP builds the pager as: var editnotes='<textarea class="desc_text" style="width:20em;" id="notes_editor">This is a test note over multiple lines </textarea>'; And this obviously causes problems for the js. So my question is, what can I do to prevent this? As the code is being built by PHP before it even gets to the browser, I'm thinking that the best approach may be to parse it in the PHP so that the output is something more like this: var editnotes='<textarea class="desc_text" style="width:20em;" id="notes_editor">This is<br/>a test note<br/>over multiple lines<br/></textarea>'; Will this work? How would I do it? Thanks

  Read the article

• Automatically stashing

  - by Readonly

  The section Last links in the chain: Stashing and the reflog in http://ftp.newartisans.com/pub/git.from.bottom.up.pdf recommends stashing often to take snapshots of your work in progress. The author goes as far as recommending that you can use a cron job to stash your work regularly, without having to do a stash manually. The beauty of stash is that it lets you apply unobtrusive version control to your working process itself: namely, the various stages of your working tree from day to day. You can even use stash on a regular basis if you like, with something like the following snapshot script: $ cat <<EOF > /usr/local/bin/git-snapshot #!/bin/sh git stash && git stash apply EOF $ chmod +x $_ $ git snapshot There’s no reason you couldn’t run this from a cron job every hour, along with running the reflog expire command every week or month. The problem with this approach is: If there are no changes to your working copy, the "git stash apply" will cause your last stash to be applied over your working copy. There could be race conditions between when the cron job executes and the user working on the working copy. For example, "git stash" runs, then the user opens the file, then the script's "git stash apply" is executed. Does anybody have suggestions for making this automatic stashing work more reliably?

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >