Search Results

Search found 8706 results on 349 pages for 'boot camp'.

Page 275/349 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• Wireless router not connection -> AP Not associated

  - by candido

  I can not connect to internet by wireless router after some months with ubuntu 10.04. I can connect with the same portable but with win OS. My SO is ubuntu 10.04 linux 2.6.32-41 arch SMP i686. The internet wireless network controller is Atheros AR9285 chipset (pci express) Kernel module ath9k I have tried a command line connection: $ sudo /etc/init.d/network-manager stop #stop gui network manager $ iwconfig wlan0 essid WLAN_3C key s:C001D20550B3C $ ifconfig Access Point: NOT-ASSOCIATED $dmesg ... AP 00:1a:2b:08:60:49 associated Is the SO has connected to router for booting long ( associated message), after boot and login why the connection to router is not possible by network-manager or command line (NOT associated message)? Thanks in advance

  Read the article

• Switching to Linux, Need backup help

  - by Stephen

  I have an existing Vista installation on my thinkpad x200 and I want to install Linux on my machine. I've done this several times already but I usually format the whole disk and dual boot on Windows and Linux. Which means I have to reinstall and reconfigure everything I had on Windows. What I want to do is backup my windows installation (into an image) and start a clean Linux installation, and run the windows image thru Vmware or Virtualbox. Whats the easiest way to do this? any free tools available? I've seen acronis but dont wanna buy it for a 1 time session only.

  Read the article

• Can Windows 7 restore itself from image to a smaller HDD than original?

  - by Borek

  I've created a full system image using the built-in Win7 utility, it was from a 300GB drive but there is only about 50GB of data. I then swapped disks in my notebook, the new one being 80GB SSD and now when I boot to the system restore applet, go through all of the settings (finding the backed up image on a network share, confirming that I'm willing to repartition my disk etc.), I get this: The system image restore failed. No disk that can be used for recovering the system disk can be found. [Details] Is this because I'm trying to restore to a smaller disk? (Even though the data should fit without any problems, there being only 50GB of it.)

  Read the article

• Cannot ssh anymore into FreeBSD 7.2 home server

  - by Gabi

  Somehow sshd stopped running and no amount of start, restart or onestart will make it go again. I normally ssh into it from a dual-boot laptop computer that shows up on the network as gabi-buntu when running Ubuntu Karmic, and as gabi-pc when running Windows XP Pro. Neither my Putty connection nor the Linux terminal can establish a ssh link anymore. Upon rebooting the server, I am greeted with "/etc/rc: WARNING: run_rc_command: cannot run /usr/sbin/sshd". In addition, a message will appear saying things like rpc.statd: failed to contact host gabi-buntu RPC: port mapper failure RPC: timed out Everything else works fine. The FreeBSD 7.2 box runs a print server, a Samba server, and an Apache server for the home wiki, via https. It also serves up NFS shares for Linux clients. Any suggestions? Thank you, Gabi Huiber

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• CentOS Live CD Creation issues

  - by Dheeraj

  I am creating my customized CentOS 6.3 Live CD. I am following information given at https://projects.centos.org/trac/livecd/wiki/GetToolset My "livecd-creator" command completes successfully and an ISO image is created. But when I try to boot up my system with this ISO, it goes up to the CentOS blue screen and then the CAPS lock and Scroll Lock LEDs on the keyboard starts flashing. Then from here after, the system takes no input from keyboard and I have to power cycle it and it does the same thing. Could you get me any suggestion why this is causing and possible workaround. Thanks.

  Read the article

• Start jade via batch script as service on windows server 2012 amazon ec2 instance

  - by E. Lüders

  I would like to start the Jade agent platform with a batch script on an windows server ec2 instance as a service. The reason for this is, that I want to start jade automatically at system startup. For creating the service I use nssm. However so far its working fine and the service is created. When I want to start the service I get an error message: Windows could not start the NAME service on Local Computer. The service did not return an error... My batch file contains only one line: java jade.Boot -platform-id P%random% If i execute the script via cmd it works fine. Anybody got an idea why this is not working if I start the batch script as a service?

  Read the article

• Win7 backup fails with "The system cannot find the file specified" 0x80070002 - has worked before

  - by Thorbjørn Ravn Andersen

  I have a 500 GB USB-disk which has been used as a backup device for a few years now, but now fails without telling me why. This is a Dell box with Intel USB-controllers (so the NVIDEA problem does not apply here). I have previously had problems with a Git package marking a non-existent directory for backup (adding it make the backup succeede). The inaccessible boot partition problem described in Windows Backup fails with 0x80070002: "The system cannot find the file specified" does not apply to me. I would appreciate hints on where to look to identify why my backup fails so I can fix it.

  Read the article

• Security of BitLocker with no PIN from WinPE?

  - by Scott Bussinger

  Say you have a computer with the system drive encrypted by BitLocker and you're not using a PIN so the computer will boot up unattended. What happens if an attacker boots the system up into the Windows Preinstallation Environment? Will they have access to the encrypted drive? Does it change if you have a TPM vs. using only a USB startup key? What I'm trying to determine is whether the TPM / USB startup key is usable without booting from the original operating system. In other words, if you're using a USB startup key and the machine is rebooted normally then the data would still be protected unless an attacker was able to log in. But what if the hacker just boots the server into a Windows Preinstallation Environment with the USB startup key plugged in? Would they then have access to the data? Or would that require the recovery key? Ideally the recovery key would be required when booted like this, but I haven't seen this documented anywhere.

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• Windows 7 just corrupted Microsoft F# and now won't fix itself.

  - by user225626

  I lost half a year's worth of custom CGAL/GMP/LEDA/Qt3/Qt4/MPFR/MPFI/Visual Studio/Boost/blahblahblah open source nonsense with DLLs that are scattered in various parts of the OS that I had gotten to finally work. All because F#, which came with .NET 4 and which I never, ever used, is now "corrupted" one day for reasons only Windows 7 knows, and now Windows 7 won't even boot. Of course none--none--of the above setup works as accessed from the USB port. How do I remove a corrupted file that prevents a Windows 7 from booting, or even being fixed by an external CD mount of the Windows 7? Thanks for any help.

  Read the article

• Windows 7 Wakeup from Sleep then Shutdown

  - by Kevin Hua

  Is this caused by low battery? I have an Asus UX31A, and I left it unattended. As usual, in 5 minutes, it went to sleep mode with the lid still open. I came back a couple hours later, and I noticed the laptop was off. I was still able to turn it on by manually pressing the power button (battery was at 2% though), but I don't understand why it shut off. If it was in sleep mode and the battery was near depletion, then wouldn't that result in a "Windows has recovered from an unexpected shutdown" upon boot? Does Windows have a mechanism to wake from sleep from a super critical battery level to shut down all programs and power down the system completely? I noticed that upon booting, firefox didn't give a fit about improper shutdown. Here are my power settings btw, powercfg -h off has been ran, so hibernation is off. And here is the event log: http://www.mediafire.com/download.php?lbfhl21g0nj2adi

  Read the article

• Cannot enter BIOS due to broken screen

  - by gamer

  Lately my laptop(hp g42 247sb) screen is damaged, so I hook it up with a external monitor(LG something) and it works fine now. But the only annoying thing is I cannot navigate the BIOS menu for some tweaking because the BIOS not shown on the external monitor,instead, it only shown on the broken laptop screen, and it only output to my external monitor when windwos/os is loged-on. So, is there anyway I can force output during BIOS/BOOT/POST to my external monitor? Things I have done and didn't work: (1)Set my LG monitor as primary display on both window properties and Intel Graphics panel (2)Enter the bios (F10 key) and press the fn+F4 key(change display output). (3)Disable and uninstall my internal screen(broken laptop screen) using device manager and restart, but windows(bios?) install it back on log-on. Please help me!

  Read the article

• What is a good motherboard for the Intel i7 series processor?

  - by jasondavis

  I am lost on choosing a good miotherboard at a decent price for my Intel i7-930 CPU. I have read bad things about all of them so far. Issues with RAM not working correctly, Windows not loading with USB keyboards plugged in and all kinds of nightmare stories. Here is my needs. - 6g/b SATA 3 - USB 3.0 - Cheaper is better - Support for up to 24gb of RAM, I will start out with only 12gb though - I will use 64bit v. of Windows 7 so the 4gb RAM limit should not be a problem from my OS - Should be able to boot even if I have a USB keyboard plugged in. If you have experience with a motherboard that meets these specs, please do tell about it. I appreciate any help, I am stuck right now on picking a good board.

  Read the article

• How to dispose of old rack-mount servers?

  - by Nic

  I have two old rack-mount servers lying around that I want to get rid of. One is a HP DL380 G2, the other is an IBM from the same era. Both machines boot up, but I don't have any harddrives for them, or any use for them. Worse yet, both machines appear to have been dropped at some point and the rail kits are bent out of shape and can't be removed, making them unusuable in a rack environment. I'd like to recycle them or dispose of them in some kind of safe manner, but don't really know what my options are. I'm in western Canada. Any suggestions? Update: If you found this question interesting, please consider visiting StackExchange Area 51 to support the proposal for a dedicated Recycling Q&A site.

  Read the article

• How can I create multiple identical AWS EC2 server instances with large amounts of persistent data?

  - by mojones

  I have a CPU-intensive data-processing application that I want to run across many (~100,000) input files. The application needs a large (~20GB) data file in order to run. What I would like to do is create an EC2 machine image that has my application and associated data files installed boot up a large number (e.g. 100) of instances of this image split my input files up into 100 batches and send one batch to be processed on each instance I am having trouble figuring out the best way to ensure that each instance has access to the large data file. The data file is too big to fit on the root filesystem of an AMI. I could use Block Storage, but a given Block Storage volume can only be attached to a single instance, so I would need 100 clones. Is there some way to create a custom image that has more space on the root filsystem so that I can include my large data file? Or is there a better way to tackle this problem?

  Read the article

• Create NTFS symbolic links from within Linux

  - by rymo

  Is there a Linux utility that can create NTFS symbolic links? That is, a link on an NTFS partition that points to another NTFS folder - one that will work within Windows 7, specifically. I wish to relocate a folder that is normally in-use while Windows is running. This machine can already dual-boot into Ubuntu, so I'd like to leverage that. EDIT: To keep this from potentially turning into "which Windows Live CD is best", I will limit this question to "Is it possible with Linux, yes or no?"

  Read the article

• USB sector 0 not fount Kingston USB DT100 G2

  - by java

  Windows constantly asks me "Foramt Disk". when i go to command prompt and type format H: /fs:ntfs or format H: /fs:fat32 response: Cannot determine the number of sectors on this volume. if the benefit DISKPART detail disk Kingston DT 100 G2 USB Device Disk ID: 00000000 Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : No Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No DISKPART detail volume Read-only : No Hidden : No No Default Drive Letter: No Shadow Copy : No Offline : No BitLocker Encrypted : No Installable : No Volume Capacity : 0 B Volume Free Space : 0 B what the problem?

  Read the article

• where are the "ipmi sel" entries parameter descriptions?

  - by Horatiu

  In order to troubleshoot a possible hardware issue I have installed ipmitools on my server and am doing queries for info related to poweron/poweroffs, hardware added/removed/status. I am trying to find some info on how to interpret sel obtained via ipmi sel list and the output looks like this : 72b4 | 10/31/2013 | 10:42:40 | System Event #0x01 | OEM System boot event | Asserted 72c8 | 10/31/2013 | 10:42:48 | System ACPI Power State #0x82 | S0/G0: working | Asserted I really want to know what "Asserted" means in this context, and also, where can I find a reference with all possible "exit status(es)" ? (Because I think that's what this is, right ?)

  Read the article

• How would you diagnose an integrated network card that doesn't show up on the device list?

  - by Tomer Gabel

  I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

  Read the article

• Software to cache a web application for use offline

  - by littlecharva

  My boss quite regularly has to demo our web application to clients in a situation with no wifi available and sketchy 3G access, quite often the 3G lets him down. I have considered setting a copy of our server up in a virtual machine on his laptop so he could demo it offline, but I fear this will just introduce more headaches when he forgets how to boot the VM up. What I'd ideally like is an app that records you logging into a web app, saves copies of all the pages and ties the links and buttons you click up to offline copies of the pages it saves. So you could run through the demonstration you're going to give and have it cache the pages. When you then click the same buttons and links in offline mode it will present the relevant offline pages. Does such a thing exist? Can anyone recommend any alternative solutions to this problem? Thanks, Anthony

  Read the article

• Windows PE 3.0 detect what device it was booted from

  - by Brian

  I am creating a custom boot disk for work using Windows PE 3.0. I need to be able to tell what drive the system was booted from. it may be a CD, or a USB Flash drive. In the past, I have looked for a file on the root of the drive that holds some of our custom configuration. however that is getting a bit messy. Basically, in addition to Windows PE, the drive or disk also has other scripts and tools. I need to remount that USB drive or DVD to the U:\ Drive, to keep thing consistent. Basically, Diskpart.exe Select Volume $X assign Letter=U Exit I just need to figure out how to determine that nasty little $X.

  Read the article

• How can I guess if a USB cable will power my devices?

  - by rsanchez

  I've had problems with one long (4 meter) USB Mini-B to USB Type-A cable not being able to boot a 2.5'' external hard disc due to not supplying enough current. On top of that, the cable used a Type-A to Mini-B adapter for the Mini-B part, which probably made things worse. Three different shorter cables I got around made the hard disk work without extra current, so it was definitively the cable's fault. However, if I plugged the hard disk to the power, and used the long cable just for data it worked. Here is some related information on powering through USB cables: http://www.girr.org/mac_stuff/usb_stuff.html I have not any long cables that don't have an intermediary Type-A to Mini-B adapter to try them out. My question is: is there a way to guess if a cable will provide enough power for charge/disk drive power? Is it related to the length of the cable, to the build quality of the cable, or the fact that uses intermediary adapters?

  Read the article

• mirroring linux server to external usb harddrive

  - by DuPie

  My google-fu must be sucking. i havent been able to find a good solution for the following: numerous Linux server on commodity hardware Trying to do a recovery mirror copy to external harddrives External harddrives are smaller than source harddrives, but larger than data External drives are connected via usb2 (slow) Servers range from 20GB of data to 400GB of data Servers are remote, so hands on access is a pain need to copy boot files. empty external drives currently Basicly, looking for a way to do use a ghosting solution from INSIDE a running linux server to an external harddrive, without booting a cd etc. the rsync/cpio solutions i've looked at dont work great with grub/dev/proc etc. I understand that since the system isnt offline, it wont be a "mirror" image as files change, but thats ok. Are there any free/commercial products that would work?

  Read the article

• Problem reinstalling GRUB

  - by DisgruntledGoat

  I have a PC that dual-boots Ubuntu and Windows Vista. I recently reinstalled Windows Vista after some problems and now the bootloader's gone. I've been trying to follow this Ubuntu community guide but it's not working. I have Grub Legacy according to the first part (I installed Ubuntu 9.04 originally then upgraded). From the 9.04 LiveCD, I ran this: sudo grub-install --root-directory=/media/disk /dev/sda5 sda5 is the Ubuntu partition. I get this output: grub-probe: error: Cannot open `/boot/grub/device.map` [: 494: =: unexpected operator Installing GRUB to /dev/sda5 as (hd0,4)... Installation finished.No errors reported. This is the contents...(etc) (hd0) /dev/sda In the bit below, when I run setup (hd0) I get an error, "Error 17: Cannot mount selected partition" Little help?

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >