Search Results

Search found 7747 results on 310 pages for 'dev karl'.

Page 275/310 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• Django + Virtualenv: manage.py commands fail with ImportError of project name.

  - by Bartek

  This is blowing my mind because it's probably an easy solution, but I can't figure out what could be causing this. So I have a new dev box and am setting everything up. I installed virtualenv, created a new environment for my project under ~/.virtualenvs/projectname Then, I cloned my project from github into my projects directory. Nothing fancy here. There are no .pyc files sitting around so it's a clean slate of code. Then, I activated my virtualenv and installed Django via pip. All looks good so far. Then, I run python manage.py syncdb within my project dir. This is where I get confused: ImportError: No module named projectname So I figured I may have had some references of projectname within my code. So I grep (ack, actually) through my code base and I find nothing of the sorts. So now I'm at a loss, given this environment why am I getting an ImportError on a module named projectname that isn't referenced anywhere in my code? I look forward to a solution .. thanks guys!

  Read the article

• C++ : Avoid lot of boolean variable for multiple verification conditions in trading app

  - by Naveen

  Hi i am a junior dev in trading app... we have a order refresh verification unit. It has to verify order confirmation from exchange. We send a bunch of different request in bulk ( NEW, MODIFY, CANCEL ) to exchange... Verification has to happen for max N times with each T intervals for all orders. if verification successful for all the order before N retry then fine.. otherwise we need to indicate as verification unsuccessfull. i hv done a basic coding done in very urgent like below for( N times ) { for_each ( sent_request_order ) // SENT { 1) get all the refreshed order from DB or shared mem i.e REFRESHED 2) find current sent order in REFRESHED if( not_found ) not refreshed from exchange, continue to next order if( found ) case NEW : //check for new status, mark verification done case MODIFY : //check for modified status.. //if not mark pending, go to next order, //revisit the same after T time case CANCEL : //check for cancelled status.. //if not mark pending, go to next order, //revisit the same after T time } if( all_verified ) exit from verification. wait ( T sec ) } order_verification_pending, order_verification_done, order_visited, order_not_visited, all_verified, all_not_verified ... lot of boolean flags used for indication.. is there any better approach for doing this.... splitting responsibilities across the classes......???? i know this is not a general question.... but still flags are making me tidious to handle...

  Read the article

• How to set up django-admin.py on windos vista?

  - by shin

  I manage to install Django after some struggles by using setup.py install on Windows Vista Now I tried to use django-admin.py but it is not working. According to this document, http://docs.djangoproject.com/en/dev/ref/django-admin/ The django-admin.py script should be on your system path if you installed Django via its setup.py utility. If it’s not on your path, ... For Windows users, who do not have symlinking functionality available, you can copy django-admin.py to a location on your existing path or edit the PATH settings (under Settings - Control Panel - System - Advanced - Environment...) to point to its installed location. I checked ComputerpropertiesEnvironment Variables, but path to django-admin.py is not in anywhere. So I added C:\Python25\Lib\site-packages\django\bin which is the folder of django-admin.py in User variables for shin Variable PATH, Value C:\Program Files\Google\google_appengine\;C:\Python25\Lib\site-packages\django\bin\ Am I supposed to add to System variables?? But it still does not work. Could anyone tell me how to add the Path in Environment Variables please? Thanks in advance.

  Read the article

• How can we best represent the SDLC process as a board game?

  - by Innogetics

  I recently got interested in financial board games and saw how they can be very useful in educating children about certain concepts. It got me thinking whether it was also possible to represent certain aspects of executing a software project via a boardgame and make it fun. Here are a few things that I have come up so far: human resources and tools / techniques are represented as cards. requirements are also represented as cards, which are dealt equally to each player, and the objective is to move all requirement cards through an "SDLC" board (one per player) that represent a series of squares grouped according to phases (design all the way to deployment) the passage of time is represented in a main square board like monopoly, and completing a trip around the board (passing "Go") allows the player to move each of the requirement cards a number of steps through the SDLC board depending on the capability of the resource cards (senior programmer allows one requirement to move two squares in the dev phase, junior programmer only one, etc.) players will start with play money representing the project budget, and at every pass at "Go" is payday. the player is out of the game if he runs out of funds. the main board also has "chance" / "risk" cards, which represent things that can mess up a project. damage is applied at the roll of a die, and chance modifiers depend on whether the user has "bought" tools / techniques. I haven't implemented this idea yet as I'm still looking at more play elements that can make the game more engaging, as well as soliciting for more ideas. I am planning to release this under Creative Commons license but haven't decided on the exact license yet. Any more game play suggestions are welcome. UPDATE: This was posted in BoardGameGeek and there's now an active discussion thread there. http://www.boardgamegeek.com/article/4436694

  Read the article

• Can I cross compile with gcc for an old version of a Linux distro on my Ubuntu 9.10?

  - by Johan

  Hi, I have some old hardware with an old version of say SuSE linux running on it. Now I have this fancy development machine running Ubuntu 9.10. Some of the tools I use to compile my C app (written in Python 2.6.x) are not available on the old SuSe box. So... is it possible to compile for that old machine on my dev box? I have the following steps in mind, but would like to cross-check before venturing off into this quest: 1. Find out which static/shared libs my app needs and find/build target version of them 2. Also find the corresponding header files 3. Feed the correct flags to gcc to use the target headers and libraries 4. Feed the correct flags to gcc to use the correct architecture (i386/i686), or do I need a cross-compilation toolchain. 5. Compile, upload and enjoy ;-) I regularly use avr-gcc and cc65, both are cross compiling. I know that you set up a coss compiler for developing something like a gumstix, so it should be possible to do the same for old/other Linux distros, not? C

  Read the article

• Using nohup mysqldump from php script is inserting a '!' and breaking to a new line.

  - by Aglystas

  I'm trying to run a mysqldump from php using the nohup command to prevent the script from hanging. Here's the command (The database is mc6_erik_test, everything else is just a table list until you get to the end) exec("mysqldump -u root -pPassword -h vfmy1-dev.mountainmedia.com mc6_erik_test access_log admin affiliate affiliate_2_product authorized_ip category category_2_product claim_code claim_code_log country_exclude customer customer_2_subscription customer_account_log customer_address customer_bill customer_discount customer_ip customer_key email_bulk_log email_draft email_queue email_queue_log email_template endicia_log gift_wrap image_bulk_upload log mailing_list manufacturer merchant merchant_checkout merchant_ip merchant_ship merchant_ship_conf new_account_temp order_dest order_item order_item_2_dest order_item_2_package order_item_log order_item_registrant order_note order_package order_package_label orders package package_2_product pref product product_2_supplier product_also product_event_date product_image product_option product_related product_review product_review_helpful product_ship_disable report search_log subscription supplier temp_product transaction_account transactions wish_list wish_list_fill wish_list_item --opt --where='merchant_id=\'6\'' /tmp/sync_db_card_20100519105358.sql"); As you can see it's really long, because I have to specifically include only the tables I want to dump. The command works great from the command line, however when I run it through a web script towards the end the following is being used as the command... supplier temp_product transaction_account transactio! ns wish_list wish_list_fill wish_list_item --opt --where='merchant_id="6"' > /tmp/sync_db_card_20100519105358.sql So the table 'transactions' is being split by an exclamation point and newline. The rest of the command is exactly the same. And if I run this through the php-cli interface it doesn't happen only when I try running it via the webserver using nohup. I'm wondering if there is some inherit string length to using the exec command within a php script, or really if anyone has any general idea what is going on here.

  Read the article

• XML Catalog in Eclipse is not working

  - by svaret

  Where I work we do not have any internet connection. We still want to have validation and code completion when editing xml files. I have tried the instructions here http://www.helmers.nu/?p=276 However, I try the instructions, restarts eclipse, do reload dependencies. I still cannot get any code completion nor validation. Can anyone point me in the right direction? I have tried both with Eclipse Galileo and Helios. My catalog.xml <?xml version="1.0" encoding="UTF-8" standalone="no"?> <catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog"> <uri name="http://www.liquibase.org/xml/ns/dbchangelog/1.9" uri="file:///C:/dev/XMLSchemaDefinition/dbchangelog-1.9.xsd"/> </catalog> My xml-file: <?xml version="1.0" encoding="UTF-8" standalone="no"?> <databaseChangeLog xmlns="http://www.liquibase.org/xml/ns/dbchangelog/1.9" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.liquibase.org/xml/ns/dbchangelog/1.9 http://www.liquibase.org/xml/ns/dbchangelog/dbchangelog-1.9.xsd"> </databaseChangeLog>

  Read the article

• How do you fix issues with the debugger for the Android plug-in for Eclipse not attaching?

  - by user279112

  I have been trying to program something for the Android mobile phone, using Eclipse and the Android plug-in for that IDE, and my debugger used to attach just fine. But then it has suddenly started having consistent issues attaching. I just get that message about how the process is waiting for the debugger attach, and then it just won't. What determines whether the attachment glitches so seems to have something to do with what the code is that I'm trying to debug, as it seems to be drastically more of an issue with some versions of my code than with others (on the same app). How do I fix this? Now before you answer, please understand that I have researched this issue already. I have found a couple of solutions that have worked with other people, but which do not work for me. One of which is setting the debuggable property in the main manifest file as true, and the other is going into Dev Tools and into some settings menu, and from there selecting the process and essentially saying to the fake phone, "Debug this process". Neither has really worked. Any other ideas? And just in case...I've run into one blasted technical issue like this after another trying to program for that stupid phone. And I'm not the only one who's having these issues; when I go online to research these issues, it is always very easy for me to find many people who have the same issues, and who are having to use the shottiest, sloppiest, most "ghetto" solutions to work around these issues. I know that many people have created good applications for that phone, but I don't see how I'm supposed to do that when the SDK and the plug-in just don't work half the time. Does anybody know how I may put all this trash behind me, once and for all? Thanks for your answers to either question!

  Read the article

• Are there any configurable parameters to the gpsd?

  - by danatel

  I use the gpsd daemon with my application. Sometimes, the gpsd ceases to work with no apparent reason (clean sky). Even the gpsmon monitor shows no fix. Are there any parameters which must be set? Or is it a hardware problem? I am surprissed that many satellites are visible but the "Stat" bitmap does not contain the bit 7 - ephemeris data available. Should i somewhat pre-configure my position to allow for correct ephemeris data? Here is my gpsmon screen: 127.0.0.1:2947:/dev/ttyS3 SiRF binary> ^[[4~ -¦¦¦¦¦¦¦¦¦¦¦ X ¦¦¦¦¦¦ Y ¦¦¦¦¦¦ Z ¦¦¦¦¦¦¦¦¦¦ North ¦¦¦¦ East ¦¦¦¦¦ Alt ¦¦¦¦¦¦¦¦¦¬ -Pos: 3949260 1166016 4856299 m 49.89411° 16.44920° 1379 m - -Vel: 0.0 0.0 0.0 m/s 0.0 0.0 0.0 climb m/s- -Week+TOW:1578+224837.06 Day: 2 14:27:17.06 Heading: 0.0° 0.0 speed m/s- -Skew: -13.025817 TZ: -7200 HDOP: 0.0 M1:00 M2: 00 - -Fix: 0 = - L¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ Packet type 2 (0x02) ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦- -¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¬-¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¬ -Ch PRN Az El Stat C/N ? A --Version: - - 0 2 243 19 003f 40.4 -L¦¦¦¦¦¦¦ Packet Type 6 (0x06) ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦- - 1 10 249 68 003f 43.0 --¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¬ - 2 13 90 30 003f 40.9 --SVs: 0 Drift: 96506 Bias: 135976716 - - 3 7 66 67 003f 39.8 --Estimated GPS Time: 224837059 - - 4 5 295 49 003d 39.7 -L¦¦¦¦¦¦¦ Packet type 7 (0x07) ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦- - 5 8 210 69 003f 41.0 --¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¬ - 6 23 96 5 002d 28.0 --Max: 167.570Lat: 132.129Time: 0.075 MS: 02 - - 7 6 43 3 002d 23.1 -L¦¦¦¦¦¦¦ Packet type 9 (0x09) ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦- - 8 28 163 16 003f 39.8 --¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¬ - 9 0 0 0 0000 0.0 --SVs: 11 = 8 10 7 5 13 2 28 23 3 6 4 - -10 3 55 4 002d 24.7 -L¦¦¦¦¦¦¦ Packet type 13 (0x0D) ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦- -11 0 0 0 0000 0.0 --¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¬ L¦¦¦ Packet Type 4 (0x04) ¦¦¦--DGPS source: 1 (SBAS) Corrections: 12 - L¦¦¦¦¦¦¦ Packet type 27 (0x1B) ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦-q

  Read the article

• How can we serialize a class that is not a custom class of our own?

  - by Doug

  I need to look at the properties of an object and I cannot instantiate this object in the proper state on my dev machine. I need my client to run some code on her machine, serialize the object in question to disk and then I can analyze the file. Here is the class I want to serialize. System.Security.AccessControl.RegistrySecurity Here is my code: Private Sub SerializeRegSecurity(ByVal regKey As RegistryKey) Try Dim regSecurity As System.Security.AccessControl.RegistrySecurity = regKey.GetAccessControl() Dim oXS As XmlSerializer = New XmlSerializer(GetType(System.Security.AccessControl.RegistrySecurity)) Dim oStmW As StreamWriter Dim regDebugFilePath As String = Path.Combine(My.Computer.FileSystem.SpecialDirectories.Desktop, "RegDebugFile.xml") 'Serialize object to XML and write it to XML file oStmW = New StreamWriter(regDebugFilePath) oXS.Serialize(oStmW, regSecurity) oStmW.Close() Catch ex As Exception Console.WriteLine(ex.ToString) End Try End Sub And here's what I end up with in my XML file: <?xml version="1.0" encoding="utf-8"?> Any ideas on how to accomplish what I am trying to do? How can we serialize a class that is not a custom class of our own? Thanks for ANY help. Even an alternate method.

  Read the article

• How to motivate as a project leader?

  - by Zenzen

  Ok so some of you might think this is not stackoverflow related, but since I got a similar question during an interview (for a J2EE dev position) I think you guys will help me in the end. The situation is simple: you're working on a project in a small group (4-5 people), you're the project leader and the guy who's the most competent (technology wise) is also slacking the most. What do you do to motivate him? The problem is, I'm having the same issue at the university - this semester we have a lot of projects going on (6 to be exact) so we decided to dived the work so everyone will do 1-2 projects in a technology he knows/wants to learn. It's been working well for the most part, the problem is the person whom we thought would finish his project way before us as he's the most experienced among us. How am I supposed to make him do his share properly? Till now he was just half assing his part by doing the bare minimum, with which the professor wasn't really pleased to say the least... Now it's only a university project, but in the future I might have the same problem in a real job and losing a really smart and experienced worker (as firing him is the only solution I can come up with now) would really be a waste. Aren't there any better ways? p.s. now that I think about it, are there any books that would help me in becoming a better project manager?

  Read the article

• Avoiding Multiple Dialog Calls with htaccess

  - by Jeffrey J Weimer

  OK, I'm new to this, so pardon if the question is already a FAQ. Searching multiple places still leaves me dumbfounded. I have a Web site generated with iWeb09/Mac hosting on an ISP. To secure certain pages, I am trying to set up .htaccess + .htpasswd files. The basic directory structure is ... Main index.html Images.html Images (some css, js stuff) Media Image01 Image01.jpeg ... Image02 Image02.jpeg ... I want to password protect access to the Images directory and all the files therein. The index.html file has a link to the Images.html file that contains the layout for the files in the Images directory. I have put a basic .htaccess file at the Main level that restricts access via ... <Files "Images.html"> AuthType Basic AuthName "Images" AuthUserFile /Main/.htpasswd AuthGroupFile /dev/null Require valid-user </Files> I have then created a valid .htpasswd file. All works at the start, however after the first call to set up the Images.html page, the secure login prompt is displayed multiple times, presumably once for every sub-sub-directory Images/Media/ImageXX (with multiple sub-directories, I just give up after two or three times). I have also tried placing the .htaccess file inside the Images directory with the same problem. Recommendations I have seen suggest a better convention is needed in the basic .htaccess file itself. Alternatively, perhaps a companion .htaccess is needed in the Images directory. So, how do I fix this problem? -- JJW

  Read the article

• Trying to convert existing production database table columns from enum to VARCHAR (Rails)

  - by dchua

  Hi everyone, I have a problem that needs me to convert my existing live production (I've duplicated the schema on my local development box, don't worry :)) table column types from enums to a string. Background: Basically, a previous developer left my codebase in absolute shit, migration versions are extremely out of date, and apparently he never used it after a certain point of time in development and now that I'm tasked with migrating a rails 1.2.6 app to 2.3.5, I can't get the tests to run properly on 2.3.5 because my table columns have ENUM column types and they convert to :string, :limit = 0 on my schema.rb which creates the problem of an invalid default value when doing a rake db:test:prepare, like in the case of: Mysql::Error: Invalid default value for 'own_vehicle': CREATE TABLE `lifestyles` (`id` int(11) DEFAULT NULL auto_increment PRIMARY KEY, `member_id` int(11) DEFAULT 0 NOT NULL, `own_vehicle` varchar(0) DEFAULT 'Y' NOT NULL, `hobbies` text, `sports` text, `AStar_activities` text, `how_know_IRC` varchar(100), `IRC_referral` varchar(200), `IRC_others` varchar(100), `IRC_rdrive` varchar(30)) ENGINE=InnoDB I'm thinking of writing a migration task that looks through all the database tables for columns with enum and replace it with VARCHAR and I'm wondering if this is the right way to approach this problem. I'm also not very sure how to write it such that it would loop through my database tables and replace all ENUM colum_types with a VARCHAR. References [1] https://rails.lighthouseapp.com/projects/8994/tickets/997-dbschemadump-saves-enum-columns-as-varchar0-on-mysql [2] http://dev.rubyonrails.org/ticket/2832

  Read the article

• Object addSubview only works in viewDidLoad

  - by DecodingSand

  Hi, I'm new to iPhone dev and need some help with adding subViews. I have a reusable object that I made that is stored in a separate .h .m and xib file. I would like to use this object in my main project's view controller. I have included the header and the assignment of the object generates no errors. I am able to load the object into my main project but can only do things with it inside my viewDidLoad method. I intend to have a few of these objects on my screen and am looking fora solution that is more robust then just hard wiring up multiple copies of the shape object. As soon as I try to access the object outside of the viewDidLoad it produces a variable unknown error - first use in this function. Here is my viewDidLoad method: shapeViewController *shapeView = [[shapeViewController alloc] initWithNibName:@"shapeViewController" bundle:nil]; [self.view addSubview: shapeView.view]; // This is the problem line // This code works changes the display on the shape object [shapeView updateDisplay:@"123456"]; ---- but the same code outside of the viewDidLoad generates the error. So to sum up, everything works except when I try to access the shapeView object in the rest of the methods. Thanks in advance

  Read the article

• Using XPath on String in Android (JAVA)

  - by Rav

  I am looking for some examples of using xpath in Android? Or if anyone can share their experiences. I have been struggeling to make tail or head of this problem :-( I have a string that contains a standard xml file. I believe I need to convert that into an xml document. I have found this code which I think will do the trick: public static Document stringToDom(String xmlSource) throws SAXException, ParserConfigurationException, IOException { DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder builder = factory.newDocumentBuilder(); return builder.parse(new InputSource(new StringReader(xmlSource))); } Next steps Assuming the code above is OK, I need to apply xpath to get values from cat: "/animal/mammal/feline/cat" I look at the dev doc here: http://developer.android.com/reference/javax/xml/xpath/XPath.html and also look online, but I am not sure where to start! I have tried to use the following code: XPathFactory xPathFactory = XPathFactory.newInstance(); // To get an instance of the XPathFactory object itself. XPath xPath = xPathFactory.newXPath(); // Create an instance of XPath from the factory class. String expression = "SomeXPathExpression"; XPathExpression xPathExpression = xPath.compile(expression); // Compile the expression to get a XPathExpression object. Object result = xPathExpression.evaluate(xmlDocument); // Evaluate the expression against the XML Document to get the result. But I get "Cannot be resolved". Eclipse doesn't seem to be able to fix this import. I tried manually entering: javax.xml.xpath.XPath But this did not work. Does anyone know any good source code that I can utilise, for Android platform? 1.5

  Read the article

• wordpress extended_valid_elements for script tag?

  - by John

  Can someone tell me how to tell Wordpress' tinymce editor to NOT strip out script tags? I looked in wp-admin/includes/post.php and added 'extended_valid_elements'=>'script[charset|defer|language|src|type]', to the $initArray. When I do a view source on the CMS post editor, I see taht it does show up like so: <script type="text/javascript"> /* <![CDATA[ */ tinyMCEPreInit = { base : "http://dev.esolar.ca/wp-includes/js/tinymce", suffix : "", query : "ver=327-1235", mceInit : {mode:"specific_textareas", editor_selector:"theEditor", width:"100%", theme:"advanced", skin:"wp_theme", theme_advanced_buttons1:"bold,italic,strikethrough,|,bullist,numlist,blockquote,|,justifyleft,justifycenter,justifyright,|,link,unlink,wp_more,|,spellchecker,fullscreen,wp_adv", theme_advanced_buttons2:"formatselect,underline,justifyfull,forecolor,|,pastetext,pasteword,removeformat,|,charmap,|,outdent,indent,|,undo,redo,wp_help", theme_advanced_buttons3:"", theme_advanced_buttons4:"", language:"en", spellchecker_languages:"+English=en,Danish=da,Dutch=nl,Finnish=fi,French=fr,German=de,Italian=it,Polish=pl,Portuguese=pt,Spanish=es,Swedish=sv", theme_advanced_toolbar_location:"top", theme_advanced_toolbar_align:"left", theme_advanced_statusbar_location:"bottom", theme_advanced_resizing:"1", theme_advanced_resize_horizontal:"", dialog_type:"modal", relative_urls:"", remove_script_host:"", convert_urls:"", apply_source_formatting:"", remove_linebreaks:"1", gecko_spellcheck:"1", entities:"38,amp,60,lt,62,gt", accessibility_focus:"1", tabfocus_elements:"major-publishing-actions", media_strict:"", paste_remove_styles:"1", paste_remove_spans:"1", paste_strip_class_attributes:"all", wpeditimage_disable_captions:"", plugins:"safari,inlinepopups,spellchecker,paste,wordpress,media,fullscreen,wpeditimage,wpgallery,tabfocus"}, load_ext : function(url,lang){var sl=tinymce.ScriptLoader;sl.markDone(url+'/langs/'+lang+'.js');sl.markDone(url+'/langs/'+lang+'_dlg.js');} }; /* ]]> */ </script> But for some reason ,my editor still doesn't save <script> tags. What am I doing wrong?

  Read the article

• How do I run a universal app on the iPhone 3.1.3 simulator?

  - by bpapa

  I'm working on a new app that I want to be universal for the iPhone and iPad. I started out with the "Create a Window-based app" wizard, and it created separate app delegates in "iPhone" and "iPad" groups. Since I already was quite familiar with iPhone dev, I did that part of my project, and now I'm ready to do some iPad stuff. So... I started out by adding a UISplitViewController to my iPad delegate, switch the Active SDK to 3.2, and it works! But when I switch back to 3.1.3, and try to run it in the simulator, Build and Go fails. For starters, I see: ...path.../iPad/AppDelegate_Pad.h:13: error: expected specifier-qualifier-list before 'UISplitViewController' I've got my Base SDK set to 3.2 and my Deployment Target set to 3.1.3. I thought that was enough. But I also have found in the documentation this method to conditionally compile: #if __IPHONE_OS_VERSION_MAX_ALLOWED >= 30200 MyIPadViewController* vc; // Create the iPad view controller #else MyIPhoneViewController* vc; // Create the iPhone view controller #endif So do I need to do this everywhere? It seems like an awful lot of code to add (that I'll be getting rid of in a short time for 4.0 anyway) so I feel like I must be doing something wrong. And, I don't even have any idea how this works for things like @property or @synthesize declarations. tl;dr version of the question - did I miss a setting somewhere?

  Read the article

• Hierarchical/Nested Database Structure for Comments

  - by Stephen Melrose

  Hi, I'm trying to figure out the best approach for a database schema for comments. The problem I'm having is that the comments system will need to allow nested/hierarchical comments, and I'm not sure how to design this out properly. My requirements are, Comments can be made on comments, so I need to store the tree hierarchy I need to be able to query the comments in the tree hierarchy order, but efficiently, preferably in a fast single query, but I don't know if this is possible I'd need to make some wierd queries, e.g. pull out the latest 5 root comments, and a maximum of 3 children for each one of those I read an article on the MySQL website on this very subject, http://dev.mysql.com/tech-resources/articles/hierarchical-data.html The "Nested Set Model" in theory sounds like it will do what I need, except I'm worried about querying the thing, and also inserting. If this is the right approach, How would I do my 3rd requirement above? If I have 2000 comments, and I add a new sub-comment on the first comment, that will be a LOT of updating to do. This doesn't seem right to me? Or is there a better approach for the type of data I'm wanting to store and query? Thank you

  Read the article

• "NT AUTHORITY\ANONYMOUS LOGON" error in Windows 7 (ASP.NET & Web Service)

  - by Tony_Henrich

  I have an asp.net web app which works fine in Windows XP machine in a domain. I am porting it to a Windows 7 stand alone machine. The app uses a web service which makes a call to sql server. The web server (IIS 7.5) and SQL Server are on the same stand alone machine. I enabled Windows authentication for the website and web service. The web service uses a trusted connection connection string. The web service credentials uses System.Net.CredentialCache.DefaultCredentials. I noticed username, password and domainname are blank after the call! The webservice and web site use an application pool with identity "Network Service". I am getting an exception "NT AUTHORITY\ANONYMOUS LOGON" in the database call in the web service. I am assuming it's related to the blank credentials. I am expecting ASPNET user to be the security token to the database. Why is this not happening? (Usually this happens when sql server and web server are on two different machines in a domain, delegation & double hopping, but in my case everything is on a dev box)

  Read the article

• OpenGL Calls Lock/Freeze

  - by Necrolis

  I am using some dell workstations(running WinXP Pro SP 2 & DeepFreeze) for development, but something was recenlty loaded onto these machines that prevents any opengl call(the call locks) from completing(and I know the code works as I have tested it on 'clean' machines, I also tested with simple opengl apps generated by dev-cpp, which will also lock on the dell machines). I have tried to debug my own apps to see where exactly the gl calls freeze, but there is some global system hook on ZwQueryInformationProcess that messes up calls to ZwQueryInformationThread(used by ExitThread), preventing me from debugging at all(it causes the debugger, OllyDBG, to go into an access violation reporting loop or the program to crash if the exception is passed along). the hook: ntdll.ZwQueryInformationProcess 7C90D7E0 B8 9A000000 MOV EAX,9A 7C90D7E5 BA 0003FE7F MOV EDX,7FFE0300 7C90D7EA FF12 CALL DWORD PTR DS:[EDX] 7C90D7EC - E9 0F28448D JMP 09D50000 7C90D7F1 9B WAIT 7C90D7F2 0000 ADD BYTE PTR DS:[EAX],AL 7C90D7F4 00BA 0003FE7F ADD BYTE PTR DS:[EDX+7FFE0300],BH 7C90D7FA FF12 CALL DWORD PTR DS:[EDX] 7C90D7FC C2 1400 RETN 14 7C90D7FF 90 NOP ntdll.ZwQueryInformationToken 7C90D800 B8 9C000000 MOV EAX,9C the messed up function + call: ntdll.ZwQueryInformationThread 7C90D7F0 8D9B 000000BA LEA EBX,DWORD PTR DS:[EBX+BA000000] 7C90D7F6 0003 ADD BYTE PTR DS:[EBX],AL 7C90D7F8 FE ??? ; Unknown command 7C90D7F9 7F FF JG SHORT ntdll.7C90D7FA 7C90D7FB 12C2 ADC AL,DL 7C90D7FD 14 00 ADC AL,0 7C90D7FF 90 NOP ntdll.ZwQueryInformationToken 7C90D800 B8 9C000000 MOV EAX,9C So firstly, anyone know what if anything would lead to OpenGL calls cause an infinite lock,and if there are any ways around it? and what would be creating such a hook in kernal memory ? Update: After some more fiddling, I have discovered a few more kernal hooks, a lot of them are used to nullify data returned by system information calls(such as the remote debugging port), I also managed to find out the what ever is doing this is using madchook.dll(by madshi) to do this, this dll is also injected into every running process(these seem to be some anti debugging code). Also, on the OpenGL side, it seems Direct X is fine/unaffected(I ran one of the DX 9 demo's without problems), so could one of these kernal hooks somehow affect OpenGL?

  Read the article

• Javascript function to add class to a list element based on # in url.

  - by Jason

  I am trying to create a javascript function to add and remove a class to a list element based on the #tag at the end of the url on a page. The page has several different states, each with a different # in the url. I am currently using this script to change the style of a given element based on the # in the url when the user first loads the page, however if the user navigates to a different section of the page the style added on the page load stays, I would like it to change. <script type="text/javascript"> var hash=location.hash.substring(1); if (hash == 'strategy'){ document.getElementById('strategy_link').style.backgroundPosition ="-50px"; } if (hash == 'branding'){ document.getElementById('branding_link').style.backgroundPosition ="-50px"; } if (hash == 'marketing'){ document.getElementById('marketing_link').style.backgroundPosition ="-50px"; } if (hash == 'media'){ document.getElementById('media_link').style.backgroundPosition ="-50px"; } if (hash == 'management'){ document.getElementById('mangement_link').style.backgroundPosition ="-50px"; } if (hash == ''){ document.getElementById('shop1').style.display ="block"; } </script> Additionally, I am using a function to change the class of the element onClick, but when a user comes to a specific # on the page directly from another page and then clicks to a different location, two elements appear active. <script type="text/javascript"> function selectInList(obj) { $("#circularMenu").children("li").removeClass("highlight"); $(obj).addClass("highlight"); } </script> You can see this here: http://www.perksconsulting.com/dev/capabilities.php#branding Thanks.

  Read the article

• Using include() to load different page content acts differently locally vs hosted

  - by hookedonwinter

  I have a live site that includes different php files depending on what page the user is trying to access. The header and footer are the same, but in the file, if the user requests filename1.php vs filename2.php, a different php is loaded into the content of the page. Basic CMS stuff. On the live site, it works fine. I just set up a local dev environment, and it doesn't work. The file that is supposed to load into the middle of the page instead is the only file loaded. I'm not saying this well. Here's an example: How it works live: <html> <head> Stuff </head> <body> More stuff <? include( 'some_file.php' ); ?> </body> </html> How it works locally: <? include( 'some_file.php' ); ?> Just that file loads, no other content. Any thoughts on why that one page is loading, but not the surrounding content? If I'm not explaining this well, please let me know.

  Read the article

• Porting some PHP to ColdFusion

  - by Oscar Godson

  OK, I'm working with converting some very basic PHP to port to a dev server where the client only has CF. Ive never worked with it, and I just need to know how to port a couple things: <?php $pageTitle = 'The City That Works'; $mainCSSURL = 'header_url=../images/banner-home.jpg&amp;second_color=484848&amp;primary_color=333&amp;link_color=09c&amp;sidebar_color=f2f2f2'; require('includes/header-inc.php'); ?> I know: <cfinclude template="includes/header-inc.cfm"> but how to i get the var to be passed to the include and then how do I use it on the subsequent included file? Also in my CSS (main.php) I have (at the top): <?php header('Content-type: text/css'); foreach($_GET as $css_property => $css_value) {define(strtoupper($css_property),$css_value);} ?> and im using those constants like this: #main-content a {color:#<?= LINK_COLOR ?>;} How can I get that to work also with CF? Never thought I'd be working with CF :)

  Read the article

• Optimize website for touch devices

  - by gregers

  On a touch device like iPhone/iPad/Android it can be difficult to hit a small button with your finger. There is no cross-browser way to detect touch devices with CSS media queries that I know of. So I check if the browser has support for javascript touch events. Until now, other browsers haven't supported them, but the latest Google Chrome on dev channel enabled touch events (even for non touch devices). And I suspect other browser makers will follow, since laptops with touch screens are comming. This is the test I use: function isTouchDevice() { try { document.createEvent("TouchEvent"); return true; } catch (e) { return false; } } The problem is that this only tests if the browser has support for touch events, not the device. Does anyone know of The Correct[tm] way of giving touch devices better user experience? Other than sniffing user agent. Mozilla has a media query for touch devices. But I haven't seen anything like it in any other browser: https://developer.mozilla.org/En/CSS/Media_queries#-moz-touch-enabled Update: I want to avoid using a separate page/site for mobile/touch devices. The solution has to detect touch devices with object detection or similar from JavaScript, or include a custom touch-CSS without user agent sniffing! The main reason I asked, was to make sure it's not possible today, before I contact the css3 working group.

  Read the article

• IIS site always returns 404 to WinMo emulator

  - by Derick Bailey

  I'm running Win7x64 Ultimate with Visual Studio 2008. I have a website built in ASP.NET 3.5 and hosted via IIS on my box. I can run the website perfectly fine and I can hit all of the web services that I have built in the website, using a web browser. When I pull up my Windows Mobile 6 emulator and hit the site (using my IP address) it always returns a 404 error. I have the emulator cradled w/ Device Emulator Manager and I can interact with the emulated device normally. I am also able to get out to google.com and other websites w/ the emulated device. I have also verified that the emulator is hitting my box by stopping the IIS website and seeing that the WinMo emulator cannot get any response. Then when I start the site again, I get a 404 error. When I pull up my site on my local dev box via FireFox or IE using the IP address it works perfectly fine. The worst part is this worked perfectly fine a few weeks ago, when I used it last. I don't know that I've changed anything since then - I'm just trying to use the emulator to hit my site again. Help?! Update: my http requests comign from the WinMo emulator are not getting logged in the IIS log files, while my requests from FireFox on my local box are getting logged. Not sure if that helps in figuring out the problem... Update 2: I can use the ruby Webbrick server on my local box and hit that server from my emulator just fine. is in IIS not allowing me to hit the IIS site from the emu? UPdate 3: I cradled an actual WinMo device to my box with it's networking turned off and was able to hit the IIS site just fine. that makes me think it's something set up wrong in the emulator.

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >