Search Results

Search found 25551 results on 1023 pages for 'linux validated rpm oracl'.

Page 275/1023 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

  • Newbie: get access privilege

    - by Mellon
    I am newbie on Linux Ubuntu machine. I logged in to the Ubuntu with username: student. There are some directories only allowed root user to access, for example /var/lib/mysql ,(I know I can use sudo to access but it is not what I want). If I want to get the access privilege on those directories with student account, is it so that I can run the following command : chown student: PATH_TO_ROOT_USER_PRIVILEGED_DIR and after that, I can access that directory by using my own account ? am I right? If I am right, then will root user lose the access privilege because I changed it to student user? If I am wrong, please tell me the right solution. P.S. please don't concern on what I am going to do on /var/lib/mysql directory, that is only my example, as I mentioned above, I mean generally *for those directories which only have root privilege*, can I use chown to change access privilege and will root user then loose the access because of the change made by chown ? I just wanna know the effect of chown.

    Read the article

  • r1soft agent is failing with the error: "write error while sending code: Broken pipe"

    - by curiousguy
    I have an Ubuntu 10.04.4 LTS server with r1soft agent installed in it. Recently, the backups are failing with the following error. -------- write error while sending code: Broken pipe -------- I have reinstalled the buagent but to no avail. On checking the server logs, I could see the following errors listed in it: -------- # tail -f /var/log/messages |grep -i buagent Nov 17 03:35:06 microscope buagent: Need to back up 126 sectors Nov 17 03:35:06 microscope buagent: (Righteous Backup Linux Agent) 1.79.0 build 12433 Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.195) with valid RSA key Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.201) with valid RSA key Nov 17 03:35:06 microscope buagent: sending auth challenge for allowed host at (10.128.136.201) port (47890) Nov 17 03:35:06 microscope buagent: host (10.128.136.201) port (47890) authentication successful Nov 17 03:35:06 microscope buagent: Backup request accepted. Starting backup. Nov 17 03:35:06 microscope buagent: Snapshot completed in 0.010 seconds. Nov 17 03:45:03 microscope buagent: Error reading blocks from snapshot. Nov 17 03:45:03 microscope buagent: Reading blocks failed Nov 17 03:45:03 microscope buagent: error backup aborted Nov 17 03:45:03 microscope buagent: backup failed on agent closing connection Nov 17 03:45:03 microscope buagent: Backup failed. Nov 17 03:45:03 microscope buagent: write error while sending code: Broken pipe (32) Nov 17 03:45:03 microscope buagent: tell child write failed -------- I tried changing the 'Timeout' and 'DiskAsPartition' value in '/etc/buagent/agent_config' file but no luck. Also, verified that proper route is added to the backup server. The agent is also running fine. Am I missing anything? Any help would be much appreciated. Note: CDP 2.0 is installed in the backup server.

    Read the article

  • How do I effectively use WinSCP on my GoDaddy Dedicated Hosting

    - by Scott
    After being told that Virtual Private Servers would not fit the scope of my project, I have timidly entered the world of dedicated hosting. Unfortunately, this is forcing me how to learn the basics of being a Linux server admin. GoDaddy has a master account for the server. When you use SSH, they want you to use "su" to switch to the root user. Thus far, I have been able to do everything I have needed to thus far via the command line as this root user. However, now I need to upload files to my server. I'm used to using WinSCP to upload files. I can use my general server account to view the files but when I try to drag or create files its says that I cannot because I do not have permission to do so. I have researched the WinSCP documentation and it seems that this "su" function is beyond the scope of the program. How am I to grant myself access to upload these files using SSH? Should I create a user with the proper permissions? I'm happy to do this but thus far I have not been able to make sense of what I have found online. I'm going to try and move forward but any help and/or insight is appreciated.

    Read the article

  • What is the advantage of not running as root? [closed]

    - by Shmuel Brill
    Possible Duplicate: What's wrong with always being root? All modern brands of Linux highly discourage (or disable) one from running as root instead of a normal user. I do not understand why. As a "normal" user, one could Download a rouge program from the internet. Run it (After all, one isn't root, what can it do). It installs itself in .bashrc or .xinitrc It writes a rouge "sudo" and "su" and adds . to the path Not noticing that . is in path, one runs sudo. The rouge program now has root password and can do anything it wants in the system. Even if 3-6 doesn't happen, the program could still Be part of a botnet. Read all files in the home directory and send them back (mine for SS#, Credit Card numbers, bank account numbers, etc). Send spam. Run a backdoor server to allow an attacker a chance to connect to the machine to determine vulnerabilities. It seems that the whole "permissions" thing (root/non-root) is just to prevent amateur crackers from getting into the system, so the question is: Is there a point in avoiding running as root, and is there a way to protect oneself if one wants to run unsafe code?

    Read the article

  • Kate gives out debug messages on the console from which it is started

    - by Elan
    I am new to Linux. I use Ubuntu 11.04. Whenever I open a file with kate from the commandline, with 'kate &' (or without ampersand), Kate starts out giving messages on the console. It continuously gives them out as I save a file or close one. They look like debug messages to me (sample below). I have used Synaptic package manager to install Kate. Uninstalling and installing the dev version did not make any change. Soon my console becomes cluttered. Is there a way to suppress these messages? There was nothing explicit in Kate settings either. Thank you, The messages look like kate(13412)/kate-filetree KateFileTreeModel::handleInsert: BEGIN! kate(13412)/kate-filetree KateFileTreeModel::handleInsert: creating a new root kate(13412)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x1796840,0x0,-1,QObject(0x0) .... kate(13435)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x1eb7cf0,0x1eb6830,0,KateDocument(0x1d93ea0) , "Untitled" ) kate(13435)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN! kate(13435)/kate-filetree KateFileTreeModel::updateBackgrounds: END! kate(13435)/kate-filetree KateFileTreeModel::documentActivated: END! kate(13435)/kate-filetree KateFileTreePluginView::viewChanged: END! X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x5601b42 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x5601b42

    Read the article

  • Commandline program to extract archives with automatic subdirectry detection

    - by ??????
    The title already says it. What I'm looking for is essentially the pure commandline counterpart to ark -ba <path> (on KDE), or file-roller -h <path> (on GNOME/Unity). Unfortunately, both ark and file-roller require X to be running. I'm aware that it is relatively simple to write a tool that detects archives based on their file extension, and then runs the appropiate program: #!/bin/bash if [[ -f "$1" ]] ; then case $1 in *.tar.bz2) tar xjvf $1 ;; *.tar.gz) tar xzvf $1 ;; *.bz2) bunzip2 $1 ;; *.rar) rar x $1 ;; *.gz) gunzip $1 ;; *.tar) tar xf $1 ;; *.tbz2) tar xjvf $1 ;; *.tgz) tar xzvf $1 ;; *.zip) unzip $1 ;; *.Z) uncompress $1 ;; *.7z) 7z x $1 ;; *) echo "'$1' cannot be extracted with this utility" ;; esac else echo "path '$1' does not exist or is not a file" fi However, that doesn't take care of subdirectory detection (and in fact, many extraction programs do not even supply such an option). So might there be a program that does exactly that? I wasn't sure whether or not to ask on askubuntu.com, because this question isn't really about Ubuntu, but rather about any Linux operating system. My apologies if this question does not fit in here.

    Read the article

  • Mplayer no sound when playing some movies

    - by Ivan Peevski
    Ok, that's a bit of a strange problem, that somehow crept into my system. It used to work fine. Here is the problem as far as I can identify it. When I try to play certain video files with mplayer, there is no sound. As far as I can tell, it is only an issue with ac3 and dts sound tracks (using the ffmpeg decoder). Mplayer says: ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 6 ch, s16le, 1536.0 kbit/33.33% (ratio: 192000->576000) Selected audio codec: [ffdca] afm: ffmpeg (FFmpeg DTS) ========================================================================== [AO_ALSA] Playback open error: Device or resource busy Failed to initialize audio driver 'alsa' Could not open/initialize audio device -> no sound. Audio: no sound (similar with ac3 sound, but using the ffac3 audio codec). Trying different audio output (-ao oss/pcm/sdl) doesn't fix the problem. The strange thing is that if I play these files directly with ffplay, they work fine. mplayer sound with mp3/ogg is fine My alsa configuration is standard (no /etc/asound.conf or ~/.asound*) OS: Linux Gentoo Mplayer: 1.0_rc4_p20100213 (SVN-r30554-4.3.4) FFMpeg: 0.5_p20601-r1 (SVN-r20601) Any other information I can provide?

    Read the article

  • Resize Debian in VirtualBox

    - by Poni
    I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

    Read the article

  • ProFTPD / PAM issues with new centos/virtualmin install

    - by iamthewit
    I just installed CentOS 5.4 on a rackspace cloud server and installed virtualmin which all seemed to go fine. The only problem I have is that I can not access the virtual servers directories via FTP. I get the following from filezilla: Status: Connecting to 1.1.1.1:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready. Command: USER username Response: 331 Password required for username. Command: PASS *************** Response: 230 User username logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (1,1,1,1,216,214) Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing and I get this from my /var/secure/log file Sep 22 19:40:42 stickeeserver proftpd: pam_unix(proftpd:session): session opened for user username by (uid=0) Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - USER nastypasty: Login successful. Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - Preparing to chroot to directory '/home/username' Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - mod_delay/0.5: delaying for 728 usecs Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - error setting IPV6_V6ONLY: Protocol not available Any help would be greatly appreciated, I'm not totally new to Linux but it's not my strongest subject. I do like to know exactly why problems occur though and how exactly to fix them so the more detail the better! cheers

    Read the article

  • System hangs while rebooting on Debian...

    - by Usman
    Hi, I have Debian (Kernel 2.6.26-2-686) installed on two computers. On one of them it reboots quite finely but I am having following problem with rebooting Debian on my second computer. When i type reboot at the Linux prompt, following messages appear and system hangs up after saying "Restarting System": Broadcast message from root@myname (tty1) (Sun Jan 17 11:23:26 2010) The system is going down for reboot NOW! INIT: Switching to runlevel: 6 INIT: Sending processes the TERM signal Saving system clock Stopping enhanced syslog: rsyslogd. Asking all remaining processes to terminate...done. Deconfiguring network interfaces...done. Cleaning up ifupdown.... Deactivating swap...done. [ 31.789103] Restarting System. _ Normally when the sytem is busy "" sign blinks but "" at the last line above does not blink which shows, the system hanged up. I tried all keys but the screen is still frozen at the same point. The difference that I noted between my two computers is that I don't have ACPI support in the BIOS of the system which is giving me this error whereas the BIOS of my first computer do have ACPI support on which Debain do not give this restart-hanging problem. I have also disabled running the acpid script by running update-rc.d -f acpid remove but the problem still persists on the second computer. Any ideas to solve or get around this problem?

    Read the article

  • Apache to read from /home/user/public_html on CentOS 5.7

    - by C.S.Putra
    this is my first experience using CentOS 5.7 / Linux as my web server OS and I have just finished installing Apache. Then I created a new account using WHM. The account is now created and the domain name can be accessed. I have put the web files under /home/user/public_html/ but when I access the domain assigned for that user which I assigned when creating new account in WHM, it doesn't read the files. In /usr/local/apache/conf/httpd.conf : <VirtualHost 175.103.48.66:80> ServerName domain.com ServerAlias www.domain.com DocumentRoot /home/user/public_html ServerAdmin [email protected] User veevou # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup group1 group1 </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup group1 group1 </IfModule> CustomLog /usr/local/apache/domlogs/domain.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." CustomLog /usr/local/apache/domlogs/domain.com combined ScriptAlias /cgi-bin/ /home/user/public_html/cgi-bin/ </VirtualHost> Instead of reading from /home/user/public_html/ apache will read the /var/ww/html/ folder. How to set the apache so that when user access www.domain.com, they will access the files under /home/user/public_html/ ? Please advice. Thanks

    Read the article

  • Ubuntu 12.4 compiz - disable all compiz plugin - empty screen

    - by gotqn
    A friend of mine has installed on my new machine Ubuntu 10.4 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

    Read the article

  • Giving two different users permissions to a dir

    - by Jason Swett
    I have a script that is run sometimes via the web, sometimes via the command line. When the script is run via web, it's run via user www-data. When it's run via command line, it's run via user jason. This script writes to a directory called cache. If I chown -R jason cache, I can run the script as jason but not www-data. This makes sense. If I chown -R www-data cache, I can run the script as www-data but not jason. This also makes sense. I tried creating a group called scripts, adding my two users, then chowning cache to scripts. I'm not really sure how to do the last part, the chowning part. The Linux command docs I've found online for this are astoundingly bad. I don't know if I explained this all that well but hopefully it's clear what I'm trying to do. Any advice would be appreciated.

    Read the article

  • Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

    - by Wolvenmoon
    I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

    Read the article

  • Distribute IP packets accross different NIC queues with MSI (Message Signalled Interrupts)

    - by Ansis Atteka
    NetXtreme II BCM5709 Gigabit Ethernet NIC supports MSI feature (Message Signaled Interrupts) and it has 8 queues. Each queue has its own Interrupt handler in /proc/interrupts. What I am trying to accomplish is to tell NIC which packets should go to which queue. Questions: Is it possible to manually specify which IP packets should go to which queue by encapsulated protocol type (e.g. IPsec packets go in one queue, while TCP packets go in another queue)? If it is possible - how can I do it under Linux? If it is not possible - should I look at MSI-X capable NIC cards to solve this problem? More details: We have one Interface that is terminating IPSec and forwarding/terminating TCP connections. The IPSec packet decryption is inlined (this means that decryption is done under the same ksoftirqd/X context). We are trying to find out if we will be able to improve total performance if IPSec packets will be scheduled on another CPU than TCP packets. One more limitation is that IPSec code is not MP-safe, hence I can not run it under more than one ksoftirqd/X. By default it seems that packets are distributed/hashed by source IP over the 8 NIC queues. The bottleneck is IPSec that chokes out TCP traffic while it is decrypting/encrypting IPSec packets at ~100% CPU. OS is Ubuntu 10.10 (2.6.32-27-server) and NIC is Broadcom BCM5709.

    Read the article

  • How to find cause of main file system going to read only mode

    - by user606521
    Ubuntu 12.04 File system goes to readonly mode frequently. First of all I have read this question file system is going into read only mode frequently already. But I have to know if it's not caused by something else than dying hard drive. This is server provided by my client and I am just runing there some node.js workers + one node.js server and I am using mongodb. From time to time (every 20-50h) system suddenly makes filesystem read only, mongodb process fails (due read-only fs) and my node workers/server (which are started by forever) are just killed. Here is the log from dmesg - I can see there some errors and messages that FS is going to read-only, and there is also some JOURNAL error but I would like to find cause of those errors.. http://speedy.sh/Ux2VV/dmesg.log.txt edit smartctl -t long /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-23-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net SMART support is: Unavailable - device lacks SMART capability. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. What I am doing wrong? Same is for sda2. Morover now when I type any command that not exists in shell I get this: Sorry, command-not-found has crashed! Please file a bug report at: https://bugs.launchpad.net/command-not-found/+filebug Please include the following information with the report:

    Read the article

  • How to deal with job that stop and cannot continue unless made foreground?

    - by Vi
    Recent example: mountlo (using UML): vi@vi-notebook:~/b$ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other& [1] 32561 vi@vi-notebook:~/b$ Checking that ptrace can change system call numbers...OK Checking syscall emulation patch for ptrace...OK Checking advanced syscall emulation patch for ptrace...OK Checking PROT_EXEC mmap in /tmp...OK Checking for the skas3 patch in the host: - /proc/mm...not found - PTRACE_FAULTINFO...not found - PTRACE_LDT...not found UML running in SKAS0 mode [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ fg mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other Linux version 2.6.15 (miko@dorka) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Mon Feb 27 13:27:52 CET 2006 (normal output) ... vi@vi-notebook:~/b$ socat - exec:'mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8\,allow_other',pty,ctty fusermount: waitpid: No child processes vi@vi-notebook:~/b$ Also happens with Gimp (when it does run it's plug-ins). Parts of Gimp started by `gimp q.jpg&' freeze and cannot continue unless "killall -CONT" or made foreground. Is it a bug? How to reliably start things in a background?

    Read the article

  • RSA keys - virtual hosts

    - by Bosworth99
    Pardon my noobness, but I just got started with VPS (linux) hosting; setting up passwordless ssh for multiple users has proved to be kind of a pain. Currently I'm the single user of this ubuntu 10.04 LTS VPS (linode.com). I was able to establish a single rsa passkey under my home/user/.ssh/authorized_keys location. Fine. PuTTy works as expected, and Filezilla (sftp) links up as required. I've been working on a single site that this user owns, and thats not been a problem. Now, I want to set up some other sites, and I've chosen Webmin with the VirtualMin plugin to make this work. I made another user (or, rather, virtualmin did), but I've been unable to get FileZilla to link up to this new user. Could anyone with experience here explain what the setup is supposed to look like? IE - can I use a single rsa key pair for all accounts (if, for example, I give ownership of files to the original user?). Or is it standard practice to create a separate key pair for each user, and establish a separate putty/filezilla login for each? I've spent enough time dinking around with this to be frustrated. "Sever rejected the provided key" error sucks after the fifth hour. I'm about to set up an ftp server and call it a day. Any thoughts would be most welcome -

    Read the article

  • Compaq R4000 laptop randomly locking up

    - by Josh
    I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors. The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue. When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens. I am open to any and all advice!

    Read the article

  • ADSL with RFC 2684 Bridging

    - by Axel Isouard
    My new ADSL line is now enabled, I can finally use my Netgear DM111Pv2 to use to the Internet. My ISP has told me a big surprise : I don't need to use a login and a password to connect to the Internet, then I must use the RFC 2684 bridging mode. It works pretty fine on the ADSL modem's side, but I've spent one night trying to figure out how to connect to the Internet through this modem. I only have a Fonera 2.0n and a computer running Gentoo Linux. I've been trying to use the br2684ctl utility with brctl on my Gentoo, first I've configured my kernel in that way : CONFIG_PPP=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_DEFLATE=y # CONFIG_PPP_FILTER is not set CONFIG_PPP_MPPE=y # CONFIG_PPP_MULTILINK is not set CONFIG_PPPOATM=y CONFIG_PPPOE=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y [...] CONFIG_ATM=y CONFIG_ATM_CLIP=y CONFIG_ATM_CLIP_NO_ICMP=y CONFIG_ATM_LANE=y CONFIG_ATM_MPOA=y CONFIG_ATM_BR2684=y # CONFIG_ATM_BR2684_IPFILTER is not set And I still get these messages : cirus nais # br2684ctl -b -c 0 -e 0 -a 8.35 br2684ctl[8041]: Interface "nas0" created sucessfully br2684ctl[8041]: Communicating over ATM 0.8.35, encapsulation: LLC br2684ctl[8041]: Fatal: failed to connect on socket; No such device The brctl utility keeps telling me "Invalid argument" each time I try to add the nas0 interface into my bridge, I'm honestly hoping I'm doing wrong. I've been following this README carefully and this tutorial on setting up a PPPoE connection with Gentoo, but the PPPoE interface just tries to start, and nothing special related to PPP happens, I can't see the interface when I do ifconfig. So, I'm asking you if there's something huge I've been missing since the beginning ! Maybe I should wait to buy a new router fully supporting the RFC2684 bridging mode, but I'm more interested in setting up this mode on my Fonera 2.0n and even my Raspberry Pi !

    Read the article

  • Member Status: Inquorate in RHEL 5.6

    - by Eugene S
    I've encountered a strange issue. I had to change the time on my Linux RHEL cluster system. I've done it using the following command from the root user: date +%T -s "10:13:13" After doing this, some message appeared relating to <emerg> #1: Quorum Dissolved (however I didn't capture the message completely). In order to investigate the issue I looked at /var/log/messages and I've discovered these errors. Below is the output of few commands I got when tried to investigate the issue, however I don't have enough knowledge to make use of this information. [root@system1a ~]# clustat Cluster Status for system4081 @ Sun Mar 25 11:45:48 2012 Member Status: Inquorate Member Name ID Status ------ ---- ---- ------ chb_sys1a 1 Online, Local chb_sys2a 2 Offline [root@system1a ~]# cman_tool nodes Node Sts Inc Joined Name 1 M 872 2012-03-25 08:43:07 chb_sys1a 2 X 0 chb_sys2a [root@system1a ~]# qdiskd -f -d [17654] debug: Loading configuration information [17654] debug: 0 heuristics loaded [17654] debug: Quorum Daemon: 0 heuristics, 1 interval, 10 tko, 0 votes [17654] debug: Run Flags: 00000035 [17654] info: Quorum Daemon Initializing stat: Bad address [17654] crit: Initialization failed I tried to search through the internet and found out a quite similar issue here. However, for some reason I am not able to access the bug on bugzilla. The link to the bug is here

    Read the article

  • What is the correct iptables rule when NATing multiple private subnets?

    - by Jose Mendez
    I have a Centos minimal 6.5 acting as a router. eth0 is connected to a Cisco switch trunk port, allowing VLANs 200-213. I have several VLAN interfaces just as this link suggests: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-networkscripts-interfaces_802.1q-vlan-tagging.html And have IPv4 forwarding, so all my network devices from any of the networks 200-213 can communicate with each other using this linux box as their router. Problem is, I need them to access the Internet, so I added the following rule: iptables -t nat -A POSTROUTING -s 192.168.0.0/16 -j SNAT --to 1.1.1.56 1.1.1.56 is the "outside" address. This works fine, devices connected to the internal networks can ping Intertnet addresses BUT, they stop being able to talk to each other across subnets, so 192.168.211.55 can ping 8.8.8.8, but can't talk to 192.168.213.5. As soon as I do a service iptables restart to remove the rule, I can start talking across internal subnets again. What would be the correct way to set up NAT for multiple private subnets? Or maybe the correct way to set up forwarding?

    Read the article

  • Getting a TTY in a Connectback Shell

    - by Asad R.
    I'm often asked by friends to help with small Linux problems, and more often than not I'm required to login to the remote system. Usually there are a lot of issues with making an account and logging in (sometimes the box is behind a NAT device, sometimes SSHD isn't installed, etc.) so I usually just ask them to make a connect-back shell using netcat (nc -e /bin/bash ). If they don't have netcat I can just ask them to grab a copy of a statically compiled binary which isn't that hard or time consuming to download and run. Though this works well enough for me to enter simple commands, I can't run any apps that require a tty (vi, for example) and can't use any job control functions. I managed to bypass this issue by running in.telnetd with a few arguments within the connect-back shell that would assign me a terminal and drop me to a shell. Unfortunately in.telnetd isn't usually installed by default on most systems. What's the easiest way to get a fully functional connect-back terminal shell without requiring any non-standard packages? (A small C program that does the job would be fine as well, I just can't seem to find much documentation on how a TTY is assigned/allocated. A solution that doesn't require me to plough through the source code for SSHD and TELNETD would be nice :))

    Read the article

  • Fedora 17 - Dropping into debug shell after attempted partitioning

    - by i.h4d35
    So I tried creating a new partition on Fedora 17 using fdisk as follows: Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (2048-823215039, default 2048): Using default value 2048 Last cylinder or +size or +sizeM or +sizeK (1-9039, default 9039): +15G Once this was done,instead of formatting the partition I created, I ran the partprobe command to write the changes to the partition table. On rebooting the computer, it drops to the debug shell and gives me the error as follows: dracut warning:unable to process initqueue dracut warning:/dev/disk/by-uuid/vg_mymachine does not exist dropping to debug shell dracut:/# While trying to run fsck on the said partition from the debug shell, it says "etc/fstab not found" and inside /etc I see a fstab.empty file. Is it now possible to retrieve what I have from the computer? Any help would be appreciated. Thanks in advance Edit: I've also tried the following steps for additional troubleshooting: I tried to boot using the Fedora disk and tried the rescue mode - says no Linux partition detected. I tried to create an fstab file by combining the entries from blkid and the /etc/mtab file and using the UUIDs from the mtab file - It didn't work. As soon as I rebooted the machine, it promptly dropped me in to the debug shell and the fstab file which i created wansn't there anymore in /etc (part of this solution)

    Read the article

  • GNOME 2 + Compiz equivalent?

    - by virtualeyes
    Running Fedora 14 and realize I need to either change distros or find an alternative to GNOME 3 in Fedora 17. Based on what I have read to-date, XFCE and KDE are the go-to WMs if I want to avoid GNOME 3. I tried KDE 4 and I wasn't impressed; I like the simplicity of GNOME 2 with Compiz and Emerald. Can't stay on Fedora 14 forever, however, so...where to turn? Basically looking for these features in my desktop environment: GNOME Do or equivalent Snap to grid/Window tiling A must-have, the ability to hot key focused window to a monitor grid region is a huge productivity win. Zoom window to cursor In a multi-monitor setup sometimes it's nice to, say, GNOME Do terminal in one monitor and then hot key the opened window to the other monitor just by zipping the mouse cursor anywhere on target monitor (followed by, of course, snap-to-grid hotkey, all without a single mouse click) Polarization At night white background hurts the eyes, so I prefer to hot key polarize to black. Multi-monitor support I'm partial to Fedora given that I've worked with CentOS for years and have little experience with any other Linux distro; however, if the difference between Fedora and Arch, Mint, etc. is fairly subtle, I'll make the leap, just need a distro & desktop environment that allows me to be productive with keyboard hot keys and provides the above basic features. Any suggestions?

    Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >