Search Results

Search found 14015 results on 561 pages for 'extended desktop'.

Page 276/561 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Which databases support parallel processing across multiple servers?

    - by David
    I need a database engine that can utilize multiple servers for processing a single SQL query in parallel. So far I know that this is possible with the some engines, though none of them are feasible for me either because of pricing or missing features. The engines currently known to me are: MS SQL (enterprise) DB2 (enterprise) Oracle (enterprise) GridSQL Greenplum Which other engines have this feature? Do you have any experience with using this feature? Edit: I have now proposed a method for creating one myself. Any input is welcome. Edit: I have found another one: Informix Extended Parallel Server

    Read the article

  • Printer to file

    - by user32912
    Hello I'm looking for a program to windows 7 that will work as a printer but it will save it to a file. Microsoft Word - Printer - Save it to "hello.pdf" on the desktop. I working on a application that will use a printer, but i don't have any printer to test with. And save to .xps files do not work, because u need to write a filename. Hope that you understand! Thanks

    Read the article

  • question about chroot

    - by morpheous
    I used chroot to install Debian Lenny on my Ubuntu desktop. I have now decided I will no longer be using Debian and so I want to remove Debian and install Ubuntu server in a chroot instead. My question is, I can simply remove the /chroot/debian/lenny folder and create a new chroot for Ubuntu server? or is there something else I need to do (I have read a bit about chroot but it does not answer this question)

    Read the article

  • Windows 7 - Disable <ctrl + monitor#> screen switching functionality

    - by jdavis
    In windows 7, when I have multiple monitors extending my desktop, there is functionality to activate a certain monitor by pressing 'ctrl' + . So if I press 'ctrl' + 2, then the current program jumps over to the monitor identified as monitor 2. I'm sure this functionality serves a good purpose, but it can be rather anoying in programs that rely on 'ctrl' + # for other functionality. Is there a way to disable this feature in windows?

    Read the article

  • Ubuntu 11.04 and OpenLDAP - where is the config?

    - by Tom SKelley
    I've been asked to setup a multimaster LDAP environment on Ubuntu 11.04 - instead of a single master server. I cloned the master server and recreated it into two VMs. I am trying to follow the instructions on the OpenLDAP documentation here: http://www.openldap.org/doc/admin24/replication.html and it talks about modifying the cn=config tree within LDAP. The subdirectory tree appears to be there at: /etc/ldap/slapd.d/ and a slapcat -b cn=config drops out a load of config information. When I try to connect using a browser and the admin bind credentials: ldapsearch -D '<adminDN>' -w <password> -b 'cn=config' I get: # extended LDIF # # LDAPv3 # base <> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # search result search: 2 result: 32 No such object I don't see the config context when I connect via an LDAP browser either. I'm sure I'm missing something, but I can't see what it is!

    Read the article

  • KVM in Ubuntu cannot trap Windows7 keyboard shortcut

    - by lydonchandra
    I am running Windows7 as a guest OS inside KVM running in Ubuntu Desktop 10.04 Everytime I do Alt+Tab within Windows7, the shortcut is caught by Ubuntu. How can I 'trap' the shortcut to stay within the guest OS? I tried running the guest OS fullscreen but Alt+Tab still escapes. Running guest OS fullscreen with display scaled up seems to trap Alt+Tab within KVM, but somehow guest OS is running very very slowly in that mode. Any idea?

    Read the article

  • External USB disk drive cannot be remounted in Windows XP

    - by jackhab
    I have Maxtor Basics Desktop 1TB external USB drive connected to Windows XP. The dirve's firmware puts it to sleep after 10-20 min of inactivity and then the drive cannot be mounted unless I reset it via power connector. While in sleep mode I can see the device in the Device Manager under both Disk drives and USB sections. Is there a way to get the drive out of sleep mode without hard reset? Thanks

    Read the article

  • Tools or templates for building nice looking cheat sheet documents

    - by Mert Nuhoglu
    I want to make some pdf cheat sheet documents. I don't have much experience in design and publishing. I wonder if there are any tools that can simplify producing cheat sheets with a standard but beautiful layout. It might be a template document or a generator software if there is some. For example, a good looking, open source, cheat sheet template written in Latex or some other desktop publishing software would be very useful.

    Read the article

  • GRUB Error after Deleting Linux Partition

    - by Nironan12
    I was dual-booting with Windows 7 and Windows Vista each taking up half of my hard drive. In Windows 7 I used Easeus Partition Manager to shrink my Windows 7 volume 8GB. On the unallocated space, I installed Linux Mint 8 RC1. After a little bit of playing around with it, I booted in Windows 7, used EPM again and deleted the 8GB Linux partition. I then extended Windows 7 on the 8GB. After restarting my computer, all I get is a black screen and this: GRUB loading. error: no such partition grub rescue> I do not have a Windows 7 disk nor does my computer come with Startup Repair. What do I do?

    Read the article

  • Out of sync audio / video in 10.6.2 Snow leopard

    - by user22902
    I have a PC with OSX86 on it. (10.6.2) Under Leopard my videos worked great, but now with VLC the audio is all garbled and video is way too fast. In Quicktime X video is too fast. MPlayer OSX Extended plays videos fine, but doesn't support many codecs. I have a Geforce 9800 GTX with qe ci ocl... If theres no solution, then are thereany other players for osx that support a lot of codecs? I don't like Windows so that's not an option. Thanks

    Read the article

  • Windows XP: saving large files on network share stalls

    - by mklhmnn
    When I transfer larger files (a few hundred MB) on a network share (either Buffalo LinkStation or other Windows machine) from my Windows XP Pro SP3, it always stalls. Smaller files are no problem, reading from a network share is also no problem. I already had this problem on my notebook and now on my desktop machine, so I assume that it most likely is no driver problem. Does anybody have a clue what could be the problem — or better: the solution?

    Read the article

  • Task-dedicated computers for the household?

    - by Matias Nino
    This question is to generate ideas for task-dedicated computers in a household. Here's mine: Personal Desktop - Gaming, working, office productivity, entertainment, CD/DVD burning General Server - backups, application hosting, mail server, file server, VM server, torrent seeding Personal Laptop - software development, mobile computing Media Center PC - Digital media playback, media file server, Gaming Photo PC - Digital photo management/archival. Nightstand Netbook - Bedtime surfing/reading Spare Laptop - general household use

    Read the article

  • Missing startup screens and slow bootup/login after using WinClone to expand Bootcamp partition

    - by user26453
    I used WinClone to backup my Bootcamp partition, which was a Windows 7 Ultimate install, on my late 2006 Macbook Pro. I desired to expand the Bootcamp partition's size. It worked reasonably well with some hiccups along the way and some remaining issues. First issue I ran into was the Bootcamp Assistant utility - it would not recreate the partition. This was due to a lack of contiguous space that is required for the Bootcamp partition. As a result I wiped the whole drive and reinstalled Snow Leopard, did the minimum amount of system updates, and created and formated a new Bootcamp partition. WinClone restored the image without complaint and the image was automatically resized to the new partition's size. Second issue I ran into was after the first boot into Windows. The first thing I noticed was that instead of the newer "slick" startup screen (4 colors wisping around, a Windows 7 title), there was more of an old school style startup screen (a progress bar with block increments, yellow/greenish color, nothing else really). The initial bootup to a login screen was slow, perhaps as Windows dealt with the partition changes. After logging in, the screen goes blank and the computer seems to hang for a minute, before completing the login. After subsequent restarts, the slick screen is still missing, boot to login screen is normal, but the time from login to desktop active is still very slow. As a side note, this behavior of a long time from login to the desktop finally loaded I've previously only seen when the computer would try to hibernate and fail (battery is really bad). On the next startup, I would see this behavior, but not subsequently. So a potential cause: I imaged the partition after hibernating out of Windows. From reading some posts/guides on the subject, this was not recommended, and perhaps shouldn't even have worked? Could the partition be stuck in some weird mode as a result that makes the boot issues appear? I've attempted to disable hibernation and restart, trying to delete the .sys file that hibernation uses. Other fixes I'm thinking of attempting are booting a Win7 disc and repairing the install/partition. I can't shake the nagging feeling something isn't right as a result of the modified boot screens and the slow login process.

    Read the article

  • Extract Links and save pages

    - by Veejay
    I have a couple of pages, each has around 20 links on it. Each link leads to a different page. I want to provide the user an option to extract all the links on these Page and then download each of the pages(20) to their desktop. Any tools/addons/plugins that I can suggest users?

    Read the article

  • Comcast SMC Port Forwarding Issue

    - by Zach Fedora
    I have a Comcast SMCD3G modem/router and I've been having issues getting the port to forward - When I check an online "open-port-checker" it says the port is forwarded/they can see the port on my IP. (1 Static IP is assigned to the modem) But when I try to access port 80 for example on a browser, it times out. Also when I try to remote desktop to the server (Windows Server 2008 R2) it doesn't work, yet canyouseeme.org says it is open. Any ideas as to what the problem could be?

    Read the article

  • How do I remove automatically added keyboard layouts?

    - by Diego
    I have a Spanish keyboard on my notebook, but I use it mostly for English and Chinese writing. This is how I configured the languages: However, Windows added some layouts on its own (probably when connecting via Remote Desktop to computers with different languages/layouts): Those layouts are all part of the AltShift cycle, which is extremely annoying. How can I remove ENG/US and ESP, considering they don't show in the configuration list? Is there a way to prevent them from being added again?

    Read the article

  • Dragging a window makes it become choppy

    - by Gerry Fleir
    On my old computer when you drag a window around, it seems to be cut up (like what you'd see in remote desktop on a slow connection) and its becoming really annoying. A few weeks when I was transferring data from it to my new laptop and it was working fine then however when I started it a few minutes ago this issue occurred. I tried restarting several time with no luck. OS: Windows XP Professional Graphics Card: nVidia 9600GT

    Read the article

  • Is it possible to use some form of code for example in PUTTY to execute a task which is done Remote

    - by xnxmx
    Basically, Every morning at 6:00AM I have to do login to remote desktop, open a program, and click on a few things to make reservations before anyone else does. I want to know if there is any other way that this can be done by simply turning it into some form of a code and executing it instead of manually doing it. Of course, time is precious here and the task needs to be done at the same pace if not faster. Thanks!!!

    Read the article

  • p2v v2v v2p tool from open source?

    - by neolix
    we have centos, fedora, ubuntu server and desktop we are looking for good open source tool for p2v v2v v2p and we are not using vmware here only we use xen or kvm. Same of the server shifted to new hardware and same of the server on xen or kvm. Can same help me !!

    Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >