Search Results

Search found 7566 results on 303 pages for 'jre lib ext'.

Page 276/303 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

• SD card initialization SPI

  - by Openavr

  Hi People I saw a lot of infos about MMC/SD cards and I tried to make a lib to read this.. (modifying the Procyon Avrlib) But I have some problems here. I Don´t change the original code and tried here. My problem is about the init of SD card. I have 2 here, a 256mb and another 1GB. I send the init commands like this order: CMD0, CMD55, ACMD41, CMD1 But SD 256mb returns me only 0x01 response for each command.. the CMD1 i send a lot of times, SD 256mb always returs only 0x01.. never 0x00. The SD 1GB is more crazy... CMD0 returns with 0x01 ..nice but the CMD55 response with 0x05... another times responde with 0xC1... and another ones response 0xF0 with a 0x5F in the next interation... Around internet have infos and examples, but a bit of confused. Here in my project, I must use 1GB card and I´m trying with a MicroSD with a SD Adapter (I think that this is not the problem). Please any help are apreciate! Regards PS - my problem like the problem from this guy http://stackoverflow.com/questions/2365897/initializing-sd-card-in-spi-issues but his solution don´t solved my problem.. The SD1GB returns only 0x01 ever... :cry:

  Read the article

• WCF done broke.

  - by SteveCav

  WCF is completely fouled up on my machine. I start a new sln in VS2008. Add a project (WCF Service Lib).Build the project (builds ok). debug the project -- it gets halfway through the progress bar and bombs out with the error below (real path changed to "my mex path" so codeproject doesn't think its spam). I'm assuming it's file permissions but don't know where to start. Any ideas?: Error: Cannot obtain Metadata from my mex path If this is a Windows (R) Communication Foundation service to which you have access, please check that you have enabled metadata publishing at the specified address. For help enabling metadata publishing, please refer to the MSDN documentation at somewhere unhelpful Exchange Error URI: my mex path Metadata contains a reference that cannot be resolved: 'my mex path'. Could not connect to my mex path. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:8731. Unable to connect to the remote server No connection could be made because the target machine actively refused it 127.0.0.1:8731HTTP GET Error URI: my mex path There was an error downloading 'my mex path'. Unable to connect to the remote server No connection could be made because the target machine actively refused it 127.0.0.1:8731

  Read the article

• How do I find a source code position from an address given by a crash in Window CE

  - by Shane MacLaughlin

  I have a Windows mobile 4.0 application, written using EVC++ 4.0 SP4 with MFC, that is exhibiting a random occasional crash in the field. e.g. Exception ox800000002 at 00112584. It does not happen under various emulators and simulators, hence is very difficult to trace using a debugger. The crash throws up and address and exception type. Given that I have the PDB is there any way to track this address to the source. I can't recompile using VC++ 8 as it doesn't support the mobile 4 SDK. My guess is that without a stack trace I'm not going to have much joy, as the chances are that the exception may not be in my source. Worth a try all the same. Edit As suggested, I have looked at the address in the context of the .MAP file for the program. This reveals the following Address Publics by Value Rva+Base Lib:Object 0001:00000000 ?GetUnduValue@@YANMM@Z 00011000 f 7Par.obj ' ' ' 0001:001124b8 ?OnLButtonUp@CGXGridUserDragSelectRangeImp@@UAAHPAVCGXGridCore@@AAVCPoint@@AAI@Z 001234b8 f gxseldrg.obj 0001:001126d8 ?OnSelDragStart@CGXGridUserDragSelectRangeImp@@UAAHPAVCGXGridCore@@KK@Z 001236d8 f gxseldrg.obj Which suggests the error occured during CGXGridUserDragSelectRangeImp::OnLButtonUp(), which seems a bit odd as I don't think there was a mouse / keyboard / screen button pressed at the time. Could be the stack got fragged before the crash got reported, and I'm wasting my time. I'll recompile with assembler output to try to isolate it to a given line, but don't hold out much hope :( Does the fact that the map file reports segmented addresses e.g. 0001:xxxxxxxxx and the crash report unsegmented addresses mean I have to carry out some computation to get the map address from the crash address?

  Read the article

• instantiate python object within a c function called via ctypes

  - by gwk

  My embedded Python 3.3 program segfaults when I instantiate python objects from a c function called by ctypes. After setting up the interpreter, I can successfully instantiate a python Int (as well as a custom c extension type) from c main: #import <Python/Python.h> #define LOGPY(x) \ { fprintf(stderr, "%s: ", #x); PyObject_Print((PyObject*)(x), stderr, 0); fputc('\n', stderr); } // c function to be called from python script via ctypes. void instantiate() { PyObject* instance = PyObject_CallObject((PyObject*)&PyLong_Type, NULL); LOGPY(instance); } int main(int argc, char* argv[]) { Py_Initialize(); instantiate(); // works fine // run a script that calls instantiate() via ctypes. FILE* scriptFile = fopen("emb.py", "r"); if (!scriptFile) { fprintf(stderr, "ERROR: cannot open script file\n"); return 1; } PyRun_SimpleFileEx(scriptFile, scriptPath, 1); // close on completion return 0; } I then run a python script using PyRun_SimpleFileEx. It appears to run just fine, but when it calls instantiate() via ctypes, the program segfaults inside PyObject_CallObject: import ctypes as ct dy = ct.CDLL('./emb') dy.instantiate() # segfaults lldb output: instance: 0 Process 52068 stopped * thread #1: tid = 0x1c03, 0x000000010000d3f5 Python`PyObject_Call + 69, stop reason = EXC_BAD_ACCESS (code=1, address=0x18) frame #0: 0x000000010000d3f5 Python`PyObject_Call + 69 Python`PyObject_Call + 69: -> 0x10000d3f5: movl 24(%rax), %edx 0x10000d3f8: incl %edx 0x10000d3fa: movl %edx, 24(%rax) 0x10000d3fd: leaq 2069148(%rip), %rax ; _Py_CheckRecursionLimit (lldb) bt * thread #1: tid = 0x1c03, 0x000000010000d3f5 Python`PyObject_Call + 69, stop reason = EXC_BAD_ACCESS (code=1, address=0x18) frame #0: 0x000000010000d3f5 Python`PyObject_Call + 69 frame #1: 0x00000001000d5197 Python`PyEval_CallObjectWithKeywords + 87 frame #2: 0x0000000201100d8e emb`instantiate + 30 at emb.c:9 Why does the call to instantiate() fail from ctypes only? The function only crashes when it calls into the python lib, so perhaps some interpreter state is getting munged by the ctypes FFI call?

  Read the article

• How do I import and call unmanaged C dll with ansi string "char *" pointer string from VB.net?

  - by Warren P

  I have written my own function, which in C would be declared like this, using standard Win32 calling conventions: int Thing( char * command, char * buffer, int * BufSize); I have the following amount of VB figured out, which should import the dll and call this function, wrapping it up to make it easy to call Thing("CommandHere",GetDataBackHere): Imports Microsoft.VisualBasic Imports System.Runtime.InteropServices Imports System Imports System.Text Namespace dllInvocationSpace Public Class dllInvoker ' tried attributes but could not make it build: ' <DllImport("Thing1.dll", False, CallingConvention.Cdecl, CharSet.Ansi, "Baton", True, True, False, True)> Declare Ansi Function Thing Lib "Thing1.dll" (ByVal Command As String, ByRef Buffer As String, ByRef BufferLength As Integer) Shared Function dllCall(ByVal Command As String, ByRef Results As String) As Integer Dim Buffer As StringBuilder = New StringBuilder(65536) Dim retCode As Integer Dim bufsz As Integer bufsz = 65536 retCode = Thing(Command, Buffer, bufsz) Results = Buffer Return retCode End Function End Class End Namespace The current code doesn't build, because although I think I should be able to create a "buffer" that the C Dll can write data back into using a string builder, I haven't got it quite right. (Value of type System.Text.STringBuilder cannot be converted to 'String'). I have looked all over the newsgroups and forums and can not find an example where the C dll needs to pass between 1 and 64kbytes of data back (char *buffer, int bufferlen) to visual basic.net.

  Read the article

• Java XMLRPC request-String

  - by Philip

  Hi, I'm using Apache XML-RPC 3.1.2 to talk to an online-service. They have something special, they need a hash over the whole XML with a secret key for some kind of security, like this: String hash = md5(xmlRequest + secretKey); String requestURL = "http://foo.bar/?authHash=" + hash; So I need the XML-request like this: <?xml version="1.0"?> <methodCall> <methodName>foo.bar</methodName> <params> <param> <value><struct> <member><name>bla</name> <value><int>1</int></value> </member> <member><name>blubb</name> <value><int>2</int></value> </member> </struct></value> </param> </params> </methodCall> But how do I get this String-representation of the XMLRPC-Request with the lib Apache XML-RPC?

  Read the article

• Django sphinx works only after app restart.

  - by Lhiash

  Hi, I've set up django-sphinx in my project, which works perfectly only for some time. Later it always returns empty result set. Surprisingly restarting django app fixes it. And search works again but again only for short time (or very limiter number of queries). Heres my sphinx.conf: source src_questions { # data source type = mysql sql_host = xxxxxx sql_user = xxxxxx #replace with your db username sql_pass = xxxxxx #replace with your db password sql_db = xxxxxx #replace with your db name # these two are optional sql_port = xxxxxx #sql_sock = /var/lib/mysql/mysql.sock # pre-query, executed before the main fetch query sql_query_pre = SET NAMES utf8 # main document fetch query sql_query = SELECT q.id AS id, q.title AS title, q.tagnames AS tags, q.html AS text, q.level AS level \ FROM question AS q \ WHERE q.deleted=0 \ # optional - used by command-line search utility to display document information sql_query_info = SELECT title, id, level FROM question WHERE id=$id sql_attr_uint = level } index questions { # which document source to index source = src_questions # this is path and index file name without extension # you may need to change this path or create this folder path = /home/rafal/core_index/index_questions # docinfo (ie. per-document attribute values) storage strategy docinfo = extern # morphology morphology = stem_en # stopwords file #stopwords = /var/data/sphinx/stopwords.txt # minimum word length min_word_len = 3 # uncomment next 2 lines to allow wildcard (*) searches min_infix_len = 1 enable_star = 1 # charset encoding type charset_type = utf-8 } # indexer settings indexer { # memory limit (default is 32M) mem_limit = 64M } # searchd settings searchd { # IP address on which search daemon will bind and accept # optional, default is to listen on all addresses, # ie. address = 0.0.0.0 address = 127.0.0.1 # port on which search daemon will listen port = 3312 # searchd run info is logged here - create or change the folder log = ../log/sphinx.log # all the search queries are logged here query_log = ../log/query.log # client read timeout, seconds read_timeout = 5 # maximum amount of children to fork max_children = 30 # a file which will contain searchd process ID pid_file = searchd.pid # maximum amount of matches this daemon would ever retrieve # from each index and serve to client max_matches = 1000 } and heres my search part from views.py: content = Question.search.query(keywords) if level: content = content.filter(level=level)#level is array of integers There are no errors in any logs, it just isnt returning any results. All help would be most appreciated.

  Read the article

• localhost not going to desired VirtualHost

  - by ladaghini

  I have several VirtalHosts set up on my computer. I'd like to visit the site I'm currently working on from a different PC using the my comp's ip address, but every config i've tried keeps taking me to a different virtual host (in fact the first virtualhost I set up on my comp). How do I set up the apache virtualhost configs to ensure that the ip address takes me to the site I want it to. /etc/apache2/sites-available/site-i-want-to-show-up-with-ip-address.conf contains: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerAlias currentsite.com DocumentRoot /path/to/root/of/site-i-want-to-show-up ServerName localhost ScriptAlias /awstats/ /usr/lib/cgi-bin/ CustomLog /var/log/apache2/current-site-access.log combined </VirtualHost> And /etc/apache2/sites-available/site-that-keeps-showing-up.conf contains: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerAlias theothersite.com DocumentRoot /path/to/it <Directory /> Options FollowSymLinks AllowOverride None </Directory> </VirtualHost> I'd appreciate anyone's help. Also, I don't know too much about configuring web servers, and I used tutorials to get the above code.

  Read the article

• IntegrityError: foreign key violation upon delete

  - by Lukasz Korzybski

  I have Order and Shipment model. Shipment has a foreign key to Order. class Order(...): ... class Shipment() order = m.ForeignKey('Order') ... Now in one of my views I want do delete order object along with all related objects. So I invoke order.delete(). I have Django 1.0.4, PostgreSQL 8.4 and I use transaction middleware, so whole request is enclosed in single transaction. The problem is that upon order.delete() I get: ... File "/usr/local/lib/python2.6/dist-packages/django/db/backends/__init__.py", line 28, in _commit return self.connection.commit() IntegrityError: update or delete on table "main_order" violates foreign key constraint "main_shipment_order_id_fkey" on table "main_shipment" DETAIL: Key (id)=(45) is still referenced from table "main_shipment". I checked in connection.queries that proper queries are executed in proper order. First shipment is deleted, after that django executes delete on order row: {'time': '0.000', 'sql': 'DELETE FROM "main_shipment" WHERE "id" IN (17)'}, {'time': '0.000', 'sql': 'DELETE FROM "main_order" WHERE "id" IN (45)'} Foreign key have ON DELETE NO ACTION (default) and is initially deferred. I don't know why I get foreign key constraint violation. I also tried to register pre_delete signal and manually delete shipment objects before delete on order is called, but it resulted in the same error. I can change ON DELETE behaviour for this key in Postgres but it would be just a hack, I wonder if anyone has a better idea what's going on here. There is also a small detail, my Order model inherits from Cart model, so it actually doesn't have id field but cart_ptr_id and after DELETE on order is executed there is also DELETE on cart, but it seems unrelated? to the shipment-order problem so I simplified it in the example.

  Read the article

• Can't Install libcurl PHP on Ubuntu Linux

  - by FranticPedantic

  I am trying to use the new facebook api and it requires libcurl PHP. I used sudo apt-get install php5-curl sudo apachectl -k restart And it didn't work. I get the same error and the phpinfo() page says nothing about libcurl. The source of this problem is probably that I built some of the tools from source (apache2, php), but then I got bored so installed a lot of the extensions with the package manager. But I'm not exactly how to go about diagnosing the point of failure. The apt-get install for curl definitely worked, and can be found in /usr/lib/php5/20060613/curl.so I think a lot of my confusion stems from not knowing which files go where, and what purpose they have. Any help would be appreciated, and please tell me if I need to provide more information. edit: The specific error I get is: Exception: Facebook needs the CURL PHP extension. from line if (!function_exists('curl_init')) { throw new Exception('Facebook needs the CURL PHP extension.'); } Ubuntu: 9.10 PHP: 5.2.13 Loaded Configuration File: /etc/php5/apache2/php.ini

  Read the article

• Why do I get "Error 6060" when I try to use DBD::Advantage with a 64-bit perl on Linux?

  - by WarheadsSE

  I realize that I am attempting to go beyond the "supported" behavior of the manf's released drivers for Perl, after all they have only released it in package with x86 .so's. However, since I cannot use their package with x64 Perl on a RHEL 5.4 x86_64 box, and maintaining a seperate install of x86 Perl just for this one package, I have made an attempt to get this puppy working thanks to released 64-bit .so's that accompany other driver packages for Advantage. What I have done to this point: download beta 10 DBI drivers, in 32 download beta 10 PHP extension (it contains 32 and x86_64) copy the required DLLs into the ads-lib location (eg /usr/local/ads/lib64) compile the Perl DBI driver with the path to the lib64's .so's Good compilation, good install, good use. The problem is that I always get : failed: [iAnywhere Solutions][Advantage SQL][ASA] Error 6060: Advantage Database Server not available on specified server. axServerConnect (SQL-HY000)(DBD: db_login/SQLConnect err=-1) Does anyone have any ideas? EDIT: fixed package name in post title EDIT: Updated title. It appears that it's not just the x64 perl, but the RHEL 5.4 underneath that may be interfering. As commented below, I managed to shoe-horn a x86 perl onto the system, and compile the DBD::Advantage 9.99, and later replacing that with 9.10, and none of these x86 would connect either. Neither library (9.99 or 9.10) in either bit-edness will connect from this x86_64 server to the windows server's UNC path. I have successfully mounted this share without problems, but still I cannot seem to connect to the 9.1. I have tried: \hostname\PATH \FQDN\PATH \IP\PATH and all of these variations with the port (default) 6262 included. My windows machine connects fine, with both 9.1 and 9.99 from strawberry perl.

  Read the article

• Error while compiling Hello world program for CUDA

  - by footy

  I am using Ubuntu 12.10 and have sucessfully installed CUDA 5.0 and its sample kits too. I have also run sudo apt-get install nvidia-cuda-toolkit Below is my hello world program for CUDA: #include <stdio.h> /* Core input/output operations */ #include <stdlib.h> /* Conversions, random numbers, memory allocation, etc. */ #include <math.h> /* Common mathematical functions */ #include <time.h> /* Converting between various date/time formats */ #include <cuda.h> /* CUDA related stuff */ __global__ void kernel(void) { } /* MAIN PROGRAM BEGINS */ int main(void) { /* Dg = 1; Db = 1; Ns = 0; S = 0 */ kernel<<<1,1>>>(); /* PRINT 'HELLO, WORLD!' TO THE SCREEN */ printf("\n Hello, World!\n\n"); /* INDICATE THE TERMINATION OF THE PROGRAM */ return 0; } /* MAIN PROGRAM ENDS */ The following error occurs when I compile it with nvcc -g hello_world_cuda.cu -o hello_world_cuda.x /tmp/tmpxft_000033f1_00000000-13_hello_world_cuda.o: In function `main': /home/adarshakb/Documents/hello_world_cuda.cu:16: undefined reference to `cudaConfigureCall' /tmp/tmpxft_000033f1_00000000-13_hello_world_cuda.o: In function `__cudaUnregisterBinaryUtil': /usr/include/crt/host_runtime.h:172: undefined reference to `__cudaUnregisterFatBinary' /tmp/tmpxft_000033f1_00000000-13_hello_world_cuda.o: In function `__sti____cudaRegisterAll_51_tmpxft_000033f1_00000000_4_hello_world_cuda_cpp1_ii_b81a68a1': /tmp/tmpxft_000033f1_00000000-1_hello_world_cuda.cudafe1.stub.c:1: undefined reference to `__cudaRegisterFatBinary' /tmp/tmpxft_000033f1_00000000-1_hello_world_cuda.cudafe1.stub.c:1: undefined reference to `__cudaRegisterFunction' /tmp/tmpxft_000033f1_00000000-13_hello_world_cuda.o: In function `cudaError cudaLaunch<char>(char*)': /usr/lib/nvidia-cuda-toolkit/include/cuda_runtime.h:958: undefined reference to `cudaLaunch' collect2: ld returned 1 exit status I am also making sure that I use gcc and g++ version 4.4 ( As 4.7 there is some problem with CUDA)

  Read the article

• Running bundle install fails trying to remote fetch from rubygems.org/quick/Marshal...

  - by dreeves

  I'm getting a strange error when doing bundle install: $ bundle install Fetching source index for http://rubygems.org/ rvm/rubies/ree-1.8.7-2010.02/lib/ruby/site_ruby/1.8/rubygems/remote_fetcher.rb:304 :in `open_uri_or_path': bad response Not Found 404 (http://rubygems.org/quick/Marshal.4.8/resque-scheduler-1.09.7.gemspec.rz) (Gem::RemoteFetcher::FetchError) I've tried bundle update, gem source -c, gem update --system, gem cleanup, etc etc. Nothing seems to solve this. I notice that the URL beginning with http://rubygems.org/quick does seem to be a 404 -- I don't think that's any problem with my network, though if that's reachable for anyone else then that would be a simple explanation for my problem. More hints: If I just gem install resque-scheduler it works fine: $ gem install resque-scheduler Successfully installed resque-scheduler-1.9.7 1 gem installed Installing ri documentation for resque-scheduler-1.9.7... Installing RDoc documentation for resque-scheduler-1.9.7... And here's my Gemfile: source 'http://rubygems.org' gem 'json' gem 'rails', '>=3.0.0' gem 'mongo' gem 'mongo_mapper', :git => 'git://github.com/jnunemaker/mongomapper', :branch => 'rails3' gem 'bson_ext', '1.1' gem 'bson', '1.1' gem 'mm-multi-parameter-attributes', :git=>'git://github.com/rlivsey/mm-multi-parameter-attributes.git' gem 'devise', '~>1.1.3' gem 'devise_invitable', '~> 0.3.4' gem 'devise-mongo_mapper', :git => 'git://github.com/collectiveidea/devise-mongo_mapper' gem 'carrierwave', :git => 'git://github.com/rsofaer/carrierwave.git' , :branch => 'master' gem 'mini_magick' gem 'jquery-rails', '>= 0.2.6' gem 'resque' gem 'resque-scheduler' gem 'SystemTimer' gem 'capistrano' gem 'will_paginate', '3.0.pre2' gem 'twitter', '~> 1.0.0' gem 'oauth', '~> 0.4.4'

  Read the article

• XML child node attribute value

  - by c0mrade

  I'm trying to read xml file, ex : <entry> <title>FEED TITLE</title> <id>5467sdad98787ad3149878sasda</id> <tempi type="application/xml"> <conento xmlns="http://mydomainname.com/xsd/radiofeed.xsd" madeIn="USA" /> </tempi> </entry> Here is the code I have so far : public void parseXML(String xml) { try { InputStream inputStream = new ByteArrayInputStream(xml.getBytes()); DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance(); DocumentBuilder db = dbf.newDocumentBuilder(); Document doc = db.parse(inputStream); doc.getDocumentElement().normalize(); System.out.println("Root element " + doc.getDocumentElement().getNodeName()); NodeList nodeLst = doc.getElementsByTagName("entry"); System.out.println("Information of all entries"); for (int s = 0; s < nodeLst.getLength(); s++) { Node fstNode = nodeLst.item(s); if (fstNode.getNodeType() == Node.ELEMENT_NODE) { Element fstElmnt = (Element) fstNode; NodeList title = fstElmnt.getElementsByTagName("title").item(0).getChildNodes(); System.out.println("Title : " + ((Node) title.item(0)).getNodeValue()); NodeList id = fstElmnt.getElementsByTagName("id").item(0).getChildNodes(); System.out.println("Id: " + ((Node) update.item(0)).getNodeValue()); NodeList contento= fstElmnt.getElementsByTagName("tempi").item(0).getChildNodes(); System.out.println("Contento : " + ((Node) content.item(0)).getFirstChild().getAttributes()); // with this line above I'm having problems, I get null pointer exception } } } catch (Exception e) { e.printStackTrace(); } } How can I read/get, contento tag attributes? I'm using org.w3c.dom lib.

  Read the article

• How to reliably replace a library-defined error handler with my own?

  - by sharptooth

  On certain error cases ATL invokes AtlThrow() which is implemented as ATL::AtlThrowImpl() which in turn throws CAtlException. The latter is not very good - CAtlException is not even derived from std::exception and also we use our own exceptions hierarchy and now we will have to catch CAtlException separately here and there which is lots of extra code and error-prone. Looks like it is possible to replace ATL::AtlThrowImpl() with my own handler - define _ATL_CUSTOM_THROW and define AtlThrow() to be the custom handler before including atlbase.h - and ATL will call the custom handler. Not so easy. Some of ATL code is not in sources - it comes compiled as a library - either static or dynamic. We use the static - atls.lib. And... it is compiled in such way that it has ATL::ThrowImpl() inside and some code calling it. I used a static analysis tool - it clearly shows that there're paths on which the old default handler is called. To ensure I even tried to "reimplement" ATL::AtlThrowImpl() in my code. Now the linker says it sees two declarations of ATL::AtlThrowImpl() which I suppose confirms that there's another implementation that can be called by some code. How can I handle this? How do I replace the default handler completely and ensure that the default handler is never called?

  Read the article

• DBD::CSV: Problem with file-name-extensions

  - by sid_com

  In this script I have problems with file-name-extensions: if I use /home/mm/test_x it works, with file named /home/mm/test_x.csv it doesn't: #!/usr/bin/env perl use warnings; use strict; use 5.012; use DBI; my $table_1 = '/home/mm/test_1.csv'; my $table_2 = '/home/mm/test_2.csv'; #$table_1 = '/home/mm/test_1'; #$table_2 = '/home/mm/test_2'; my $dbh = DBI->connect( "DBI:CSV:" ); $dbh->{RaiseError} = 1; $table_1 = $dbh->quote_identifier( $table_1 ); $table_2 = $dbh->quote_identifier( $table_2 ); my $sth = $dbh->prepare( "SELECT a.id, a.name, b.city FROM $table_1 AS a NATURAL JOIN $table_2 AS b" ); $sth->execute; $sth->dump_results; $dbh->disconnect; Output with file-name-extention: DBD::CSV::st execute failed: Execution ERROR: No such column '"/home/mm/test_1.csv".id' called from /usr/local/lib/perl5/site_perl/5.12.0/x86_64-linux/DBD/File.pm at 570. Output without file-name-extension: '1', 'Brown', 'Laramie' '2', 'Smith', 'Watertown' 2 rows Is this a bug?

  Read the article

• WPF XAML references not resolved via myAssembly.GetReferencedAssemblies()

  - by WPF-it

  I have a WPF container application (with ContentControl host) and a containee application (UserControl). Both are oblivious of each other. Only one XML config file holds the string dllpath of the containee's DLL and full namespace name of the ViewModelClass inside the containee. A generic code in container resolves containee's assembly (Assembly.LoadFrom(dllpath)) and creates the viewmodel's instance using Activator.CreateInstance(vmType). when this viewmodel is hosted inside the ContentControl of the container, and relevant vierwmodel specific ResourceDictionary is added to ContentControl.Resources.MergedDictionaries of the content control of container, so the view loads fine. Now my containee has to host the WPF DataGrid using assembly reference of WPFToolkit.dll from my local C:\Lib folder. The Copy Local reference to the WPFToolkit.dll is added to the .csproj file of the containee's project and its only referred in the UserControl.XAML using its XAML namepsace. This way my bin\debug folder in my containee application, gets the WPFToolkit.dll copied. XAML: xmlns:Controls="clr-namespace:Microsoft.Windows.Controls;assembly=WPFToolkit" <Controls:DataGrid ItemsSource="{Binding AssetList}" ... /> Issue: The moment the ViewModel (i.e. the containee's usercontrol) tries to load itself I get this error. "Cannot find type 'Microsoft.Windows.Controls.DataGrid'. The assembly used when compiling might be different than that used when loading and the type is missing." Hence I tried to load the referenced assemblies of the containee's assembly (myAssembly.GetReferencedAssemblies()) before the viewmodel is hosted. But WPFToolkit isnt there in that list of assemblies! Strange thing is I have another dll referred called Logger.dll in the containee codebase but this one is implemented using C# code behind. So I get its reference correctly resolved in myAssembly.GetReferencedAssemblies(). So does that mean BAML references of assemblies are never resolvable by GetReferencedAssemblies?

  Read the article

• How can I set QNetworkReply properties to get correct NCBI pages?

  - by Claire Huang

  I try to get this following url using the downloadURL function: http://www.ncbi.nlm.nih.gov/nuccore/27884304 But the data is not as what we can see through the browser. Now I know it's because that I need to give the correct information such as browser, how can I know what kind of information I need to set, and how can I set it? (By setHeader function??) In VC++, we can use CInternetSession and CHttpConnection Object to get the correct information without setting any other detail information, is there any similar way in Qt or other cross-platform C++ network lib?? (Yes, I need the the cross-platform property.) QNetworkReply::NetworkError downloadURL(const QUrl &url, QByteArray &data) { QNetworkAccessManager manager; QNetworkRequest request(url); request.setHeader(QNetworkRequest::ContentTypeHeader ,"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)"); QNetworkReply *reply = manager.get(request); QEventLoop loop; QObject::connect(reply, SIGNAL(finished()), &loop, SLOT(quit())); loop.exec(); int direction; QVariant statusCodeV = reply->attribute(QNetworkRequest::RedirectionTargetAttribute); QUrl redirectTo = statusCodeV.toUrl(); if (!redirectTo.isEmpty()) { if (redirectTo.host().isEmpty()) { const QByteArray newaddr = ("http://"+url.host()+redirectTo.encodedPath()).toAscii(); redirectTo.setEncodedUrl(newaddr); redirectTo.setHost(url.host()); } return (downloadURL(redirectTo, data)); } if (reply->error() != QNetworkReply::NoError) { return reply->error(); } data = reply->readAll(); delete reply; return QNetworkReply::NoError; }

  Read the article

• About Data Objects and DAO Design when using Hibernate

  - by X. Ma

  I'm hesitating between two designs of a database project using Hibernate. Design #1. (1) Create a general data provider interface, including a set of DAO interfaces and general data container classes. It hides the underneath implementation. A data provider implementation could access data in database, or an XML file, or a service, or something else. The user of a data provider does not to know about it. (2) Create a database library with Hibernate. This library implements the data provider interface in (1). The bad thing about Design #1 is that in order to hide the implementation details, I need to create two sets of data container classes. One in the general data provider interface - let's call them DPI-Objects, the other set is used in the database library, exclusively for entity/attribute mapping in Hibernate - let's call them H-Objects. In the DAO implementation, I need to read data from database to create H-Objects (via Hibernate) and then convert H-Objects into DPI-Objects. Design #2. Do not create a general data provider interface. Expose H-Objects directly to components that use the database lib. So the user of the database library needs to be aware of Hibernate. I like design #1 more, but I don't want to create two sets of data container classes. Is that the right way to hide H-Objects and other Hibernate implementation details from the user who uses the database-based data provider? Are there any drawbacks of Design #2? I will not implement other data provider in the new future, so should I just forget about the data provider interface and use Design #2? What do you think about this? Thanks for your time!

  Read the article

• C++ error: expected initializer before ‘&’ token

  - by Werner

  Hi, the following piece of C++ code compiled two years ago in a suse 10.1 Linux machine. #ifndef DATA_H #define DATA_H #include <iostream> #include <iomanip> inline double sqr(double x) { return x*x; } enum Direction { X,Y,Z }; inline Direction next(const Direction d) { switch(d) { case X: return Y; case Y: return Z; case Z: return X; } } inline ostream& operator<<(ostream& os,const Direction d) { switch(d) { case X: return os << "X"; case Y: return os << "Y"; case Z: return os << "Z"; } } ... ... Now, I am trying to compile it on Ubuntu 9.10 and I get the error: data.h:20: error: expected initializer before ‘&’ token which is referred to the line of: inline ostream& operator<<(ostream& os,const Direction d) the g++ used on this machine is: Using built-in specs. Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.4.1-4ubuntu9' --with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --enable-multiarch --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.4 --program-suffix=-4.4 --enable-nls --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --disable-werror --with-arch-32=i486 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) Could you give me some hint about this error? Thanks

  Read the article

• How to modify/replace option set file when building from command line?

  - by Heinrich Ulbricht

  I build packages from a batch file using commands like: msbuild ..\lib\Package.dproj /target:Build /p:config=%1 The packages' settings are dependent on an option set: <Import Project="..\optionsets\COND_Defined.optset" Condition="'$(Base)'!='' And Exists('..\optionsets\COND_Defined.optset')"/> This option set defines a conditional symbol many of my packages depend on. The file looks like this: <Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <DCC_Define>CONDITION;$(DCC_Define)</DCC_Define> </PropertyGroup> <ProjectExtensions> <Borland.Personality>Delphi.Personality.12</Borland.Personality> <Borland.ProjectType>OptionSet</Borland.ProjectType> <BorlandProject> <Delphi.Personality/> </BorlandProject> <ProjectFileVersion>12</ProjectFileVersion> </ProjectExtensions> </Project> Now I need two builds: one with the condition defined and one without. My attack vector would be the option set file. I have some ideas on what to do: write a program which modifies the option set file, run this before batch build fiddle with the project files and modify the option set path to contain an environment variable, then have different option sets in different locations But before starting to reinvent the wheel I'd like to ask how you would tackle this task? Maybe there are already means meant to support such a case (like certain command line switches, things I could configure in Delphi or batch file magic).

  Read the article

• Integrating legacy Ajax script in CakePHP

  - by octavian

  Hi, I have a legacy script that I would like to integrate in a cakephp app. The script makes use of $_POST and such and since I'm quite a noob I would need some help for the integration. Here is how the script looks like: THE JAVASCRIPT: prototype.js builder.js (these two are from the prototype fw) lib.js (makes a ajax requests to remote.php) THE PHP remote.php (contains FastJSON class and $_POST vars) if ($_POST['cmd'] == 'SAVETEAM' && $_POST['info']) { $INFO = json_decode(str_replace('\"', '"', $_POST['info'])); $nr = 1; $SORT = array($INFO->GK, $INFO->DEF, $INFO->MID, $INFO->FOR, $INFO->RZ); foreach ($SORT as $STD) foreach ($STD as $v) mysql_query("UPDATE players_teams SET fieldposition = ".$nr++." WHERE player_id = {$v->player_id} AND team_id = {$v->team_id}") or die(mysql_error()); // CAPTAION mysql_query("UPDATE `teams` SET captain = '{$_POST['captain']}' WHERE `user_id` = {$_POST['userid']}") or die(mysql_error()); } transfers.php (containts the form that uses the javascript and link to the JS) I have really no idea how to structure the files and calls in cakephp. Currently I have "Undefined index: cmd [APP/vendors/remote.php, line 230]" errors since I use $_POST['cmd'] (I placed remote.php in Vendors and included it, the JS was just included old fashion way, as a link and appears in the source code). How can I make this work? I'm sorry but I'm not familiar with AJAX and Cake... If you want a full look at the code, here it is: http://octavian.be/thecode.zip Thank you for reading and helping me out.

  Read the article

• BeautifulSoup can't parse a webpage?

  - by JLTChiu

  I am using beautiful soup for parsing webpage now, I've heard it's very famous and good, but it doesn't seems works properly. Here's what I did import urllib2 from bs4 import BeautifulSoup page = urllib2.urlopen("http://www.cnn.com/2012/10/14/us/skydiver-record-attempt/index.html?hpt=hp_t1") soup = BeautifulSoup(page) print soup.prettify() I think this is kind of straightforward. I open the webpage and pass it to the beautifulsoup. But here's what I got: Warning (from warnings module): File "C:\Python27\lib\site-packages\bs4\builder\_htmlparser.py", line 149 "Python's built-in HTMLParser cannot parse the given document. This is not a bug in Beautiful Soup. The best solution is to install an external parser (lxml or html5lib), and use Beautiful Soup with that parser. See http://www.crummy.com/software/BeautifulSoup/bs4/doc/#installing-a-parser for help.")) ... HTMLParseError: bad end tag: u'</"+"script>', at line 634, column 94 I thought CNN website should be well designed, so I am not very sure what's going on though. Does anyone has idea about this?

  Read the article

• Maven not setting classpath for dependencies properly

  - by Matthew

  OS name: "linux" version: "2.6.32-27-generic" arch: "i386" Family: "unix" Apache Maven 2.2.1 (r801777; 2009-08-06 12:16:01-0700) Java version: 1.6.0_20 I am trying to use the mysql dependency in with maven in ubuntu. If I move the "mysql-connector-java-5.1.14.jar" file that maven downloaded into my $JAVA_HOME/jre/lib/ext/ folder, everything is fine when I run the jar. I think I should be able to just specify the dependency in the pom.xml file and maven should take care of setting the classpath for the dependency jars automatically. Is this incorrect? My pom.xml file looks like this: <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.ion.common</groupId> <artifactId>TestPreparation</artifactId> <version>1.0-SNAPSHOT</version> <packaging>jar</packaging> <name>TestPrep</name> <url>http://maven.apache.org</url> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> </properties> <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-jar-plugin</artifactId> <configuration> <archive> <manifest> <addClasspath>true</addClasspath> <mainClass>com.ion.common.App</mainClass> </manifest> </archive> </configuration> </plugin> </plugins> </build> <dependencies> <!-- JUnit testing dependency --> <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <version>3.8.1</version> <scope>test</scope> </dependency> <!-- MySQL database driver --> <dependency> <groupId>mysql</groupId> <artifactId>mysql-connector-java</artifactId> <version>5.1.14</version> <scope>compile</scope> </dependency> </dependencies> </project> The command "mvn package" builds it without any problems, and I can run it, but when the application attempts to access the database, this error is presented: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver at java.net.URLClassLoader$1.run(URLClassLoader.java:217) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:205) at java.lang.ClassLoader.loadClass(ClassLoader.java:321) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294) at java.lang.ClassLoader.loadClass(ClassLoader.java:266) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:186) at com.ion.common.Functions.databases(Functions.java:107) at com.ion.common.App.main(App.java:31) The line it is failing on is: Class.forName("com.mysql.jdbc.Driver"); Can anyone tell me what I'm doing wrong or how to fix it?

  Read the article

• Ruby Doesn't Recognize Alias Method

  - by Jesse J

  I'm trying to debug someone else's code and having trouble figuring out what's wrong. When I run rake, one of the errors I get is: 2) Error: test_math(TestRubyUnits): NoMethodError: undefined method `unit_sin' for CMath:Module /home/user/ruby-units/lib/ruby_units/math.rb:21:in `sin' This is the function that calls the method: assert_equal Math.sin(pi), Math.sin("180 deg".unit) And this is what the class looks like: module Math alias unit_sin sin def sin(n) Unit === n ? unit_sin(n.to('radian').scalar) : unit_sin(n) end alias unit_cos cos def cos(n) Unit === n ? unit_cos(n.to('radian').scalar) : unit_cos(n) end ... module_function :unit_sin module_function :sin module_function :unit_cos module_function :cos ... end (The ellipsis means "more of the same"). As far as I can see, this is valid Ruby code. Is there something I'm missing here that's causing the error, or could the error be coming from something else? Update: I'm wondering if the problem has to do with namespaces. This code is attempting to extend CMath, so perhaps the alias and/or module_function isn't actually getting into CMath, or something like that....

  Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >