Search Results

Search found 11930 results on 478 pages for 'media center'.

Page 277/478 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• Workstation Build: Single 2.66ghz i-7 with overclock potential, OR Dual 5520 2.26ghz Xeons?

  - by jdc0589

  There are probably better places to ask this, but I am used to the excellent quality of responses on stack overflow. I am rebuilding my desktop in a few months. Aside from normal lightweight internet usage, I use it to run sqlServer, mySql, 1-2 Ubuntu VMs from time to time, lots of IDE's, and a media server for my PS3. The two possible setups cost the exact same amount (within $50) and would both have 12gb 1333mhz ddr3 ram and a 500gb RAID-0 array (250x2). Now, If I go with a single i-7 920 2.66ghz quadcore, I can easily overclock it to 3ghz, and would have cash leftover to get a 160gb ssd (either the ocz vertex or the 120gb intel) for the main OS/Program install drive. Else, I could get a dual lga1366 motherboard with two e5520 Xeon's (2.26ghz),just use the disks I already have. So, do I go for 8 physical/16 virtual cores at 2.26ghz (No overclocking on server boards) with normal disk I/O, or a 4 physical/8 virtual cores at 3.0ghz with really outstanding disk I/O?

  Read the article

• Prevent Windows 7 from unpluging External HDD [migrated]

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• Can you add preexisting storage pools in server 2012

  - by Justin

  I have been looking at Windows Server 2012's storage pools and it looks like an ideal solution for my home media center. One thing I couldn't find information on is adding a preexisting pool to a fresh server install. I ask this given the following situation: You install Windows Server 2012 and setup your storage pools You add disks over time to your pool A year later your drive with the operating system fails You replace the bad drive and reinstall server 2012. Now how do you add this preexisting storage pool full of data to your fresh install?

  Read the article

• Route global shortcuts to pages opened in Firefox

  - by zamza

  I like listening to music online on sites like stereomood.com. There is a major problem, however. I can not control the player with my keyboard. And even with a mouse - when I want to play/pause I must activate firefox window, select the tab where music plays and hit play/pause button manually - this is a pain, especially when you play a fullscreen game that can not minimize itself. Thus said, global keyboard shortcuts would be a perfect solution. I understand that different online media players have different controls and each site must be configured individually (like, select button with id 'play' and press it), but I believe that can be done in principle. I also guess that such tricks are impossible without some third-party native app which captures shortcuts and routes them to Firefox window. So, any solutions? Maybe some AutoHotkey hacks or similar.

  Read the article

• Google Maps API - Marker not showing

  - by popnbrown

  I'm trying to add markers for every single row from a table, that sits on the page. The page is http://www.sravanks.com/first/2013ftcmap.php This is the JS code that's loading the markers: $(document).ready(function() { var mapOptions = { center: new google.maps.LatLng(39.740, -89.503), zoom: 7 }; var map = new google.maps.Map(document.getElementById("map-canvas"), mapOptions); var infowindow = new google.maps.InfoWindow(); /* City Markers */ var cityCircle = new Array(); var i = 0; $.each($('.events tr'), function(index, value) { var name = $(this).find('td:first()').html(); var address = $(this).find('.address').html(); var linkUrl = "http://www.sravanks.com/first/geocode.php?address=" + address; $.ajax({ url: linkUrl }).done(function(data){ var json = $.parseJSON(data.substring(0, data.length-1)); lat = json.results[0].geometry.location.lat; lng = json.results[0].geometry.location.lng; var latlng = new google.maps.LatLng(lat, lng); var marker = new google.maps.Marker({ position: latlng, map: map, icon: 'map-pointer-medium.gif' }); google.maps.event.addListener(marker, 'click', function() { infowindow.setContent(name); infowindow.open(map, marker); cityCircle[i] = new google.maps.Circle({strokeColor: '#00FF00', strokeOpacity: 0.8, strokeWeight: 2, fillColor: '#00FF00', fillOpacity: 0.35, map: map, center: latlng, radius: 144841}); i++; }); }); }); /*Team Markers*/ var markers = {}; var teamName, teamNumber, lat, lng, content; $.each($('.list tr'), function(index, value) { teamName = $(this).find('td.name').html(); teamNumber = $(this).find('td.number').html(); markers[teamNumber] = {}; lat = parseFloat($(this).find('td.lat').html()); lng = parseFloat($(this).find('td.lng').html()); content = "Name: " + teamName + "<br />Number: " + teamNumber; markers[teamNumber]['latlng'] = new google.maps.LatLng(lat, lng); markers[teamNumber]['marker'] = new google.maps.Marker({ position: markers[teamNumber]['latlng'], map: map }); google.maps.event.addListener(markers[teamNumber]['marker'], 'click', function() { infowindow.setContent(content); infowindow.open(map, markers[teamNumber]['marker']); }); }); google.maps.event.addListener(infowindow, 'closeclick', function() { for(var i=0;i<cityCircle.length;i++){ cityCircle[i].setMap(null); } }); }); I've got no errors, but the Team Markers do not show up. The strange thing is that the City Markers do show up. Some more info, the City Markers ajax call is just to a proxy that calls the google geocoding api. Again the link's at http://www.sravanks.com/first/2013ftcmap.php

  Read the article

• Can I mix declarative and programmatic layout in GWT 2.0?

  - by stuff22

  I'm trying to redo an existing panel that I made before GWT 2.0 was released. The panel has a few text fields and a scrollable panel below in a VerticalPanel. What I'd like to do is to make the scrollable panel with UIBinder and then add that to a VerticalPanel Below is an example I created to illustrate this: public class ScrollTablePanel extends ResizeComposite{ interface Binder extends UiBinder<Widget, ScrollTablePanel > { } private static Binder uiBinder = GWT.create(Binder.class); @UiField FlexTable table1; @UiField FlexTable table2; public Test2() { initWidget(uiBinder.createAndBindUi(this)); table1.setText(0, 0, "testing 1"); table1.setText(0, 1, "testing 2"); table1.setText(0, 2, "testing 3"); table2.setText(0, 0, "testing 1"); table2.setText(0, 1, "testing 2"); table2.setText(0, 2, "testing 3"); table2.setText(1, 0, "testing 4"); table2.setText(1, 1, "testing 5"); table2.setText(1, 2, "testing 6"); } } then the xml: <ui:UiBinder xmlns:ui='urn:ui:com.google.gwt.uibinder' xmlns:g='urn:import:com.google.gwt.user.client.ui' xmlns:mail='urn:import:com.test.scrollpaneltest'> <g:DockLayoutPanel unit='EM'> <g:north size="2"> <g:FlexTable ui:field="table1"></g:FlexTable> </g:north> <g:center> <g:ScrollPanel> <g:FlexTable ui:field="table2"></g:FlexTable> </g:ScrollPanel> </g:center> </g:DockLayoutPanel> </ui:UiBinder> Then do something like this in the EntryPoint: public void onModuleLoad() { VerticalPanel vp = new VerticalPanel(); vp.add(new ScrollTablePanel()); vp.add(new Label("dummy label text")); vp.setWidth("100%"); RootLayoutPanel.get().add(vp); } But when I add the ScrollTablePanel to the VerticalPanel, only the first FlexTable (test1) is visible on the page, not the whole ScrollTablePanel. Is there a way to make this work where it is possible to mix declarative and programmatic layout in GWT 2.0?

  Read the article

• Stretching DIV to 100% height and width of window but not less than 800x600px

  - by El Eme

  I have a page that needs to stretch and resize with with window and I've managed to do that but I need that the "inner div" (#pgContent) stretch if the window is resized to higher dimensions but that it doesn't shrink more than, let's say for example 800 x 600 px. As I have it now it stretches well but it also shrinks more than I want! It's working as I want in width but not in height!? Here's a visual example: My CSS: * { margin: 0; padding: 0; outline: 0; } /*| PAGE LAYOUT |*/ html, body { height: 100%; width: 100%; /*text-align: center;*/ /*IE doesn't ~like this*/ cursor: default; } #pgWrapper { z-index: 1; min-height: 100%; height: auto !important; /*min-height: 600px;*/ /* THIS SHOULD WORK BUT IT DOESN'T */ height: 100%; min-width: 1000px; width: 100%; position: absolute; overflow: hidden; text-align: center; background: #000; } #pgContent { position: absolute; top: 30px; left: 30px; right: 30px; bottom: 50px; overflow: hidden; background: #CCC; } #footWrapper { z-index: 2; height: 50px; min-width: 940px; position: absolute; left: 30px; right: 30px; bottom: 0px; background: #C00; } /*| END PAGE LAYOUT |*/ And the HTML: <body> <div id="pgWrapper"> <div id="pgContent"> This DIV should stretch with window but never lower than for example 800px x 600px!<br /> If window size is lower then scrollbars should appear. </div> </div> <div id="footWrapper"> <div id="footLft"></div> <div id="footRgt"></div> </div> </body> If someone could give me a help on this I would appreciate. Thanks in advance.

  Read the article

• Options to Reformat USB Drive

  - by user8783

  I have a 64GB usb thumb drive. When I plug it into a Windows system (I have tried several machines with both Windows 7 and 8), the system attempts to read it and never completes. The drive does not show up in the device manager, nor does it appear in Computer Management - Disk Management. If I click on the "Safely Remove Hardware" icon, however, I do get an option for "Eject Mass Storage Media", although it never accomplishes anything. Also, as long as the USB drive is connected, I cannot access other USB drives or even restart my computer. It seems as though it locks up Windows Explorer. Is there any option to reformat this drive? It was a great drive up until all this craziness began and I would hate to throw it out because it was rather pricey.

  Read the article

• Windows7: Which app has a notification sound with 3 descending notes?

  - by Eric

  Brand new Win7 box loaded with the usual dev tools -- VS2008, Firefox, Chatzilla, Thunderbird, emacs, Pidgin, Putty, iTunes, SharpReader. Every couple of minutes, I get an audio notification consisting of three rising notes, maybe a middle-C-G-F on a piano (I don't have a piano handy, and don't have time to use GarageBand to try to figure it out). Nothing in the notification bar is flashing when this happens. The sound isn't in any of the Windows Sound control panel applets. And it's not in C:\Windows\Media, so it's most likely coming from a non-Microsoft app. Is this familiar to anyone?

  Read the article

• How can one implement RAID1 with a Dell Latitude laptop containing one normal hard drive, and one hard drive in an external bay?

  - by user12583188

  OS: Win7 professional Laptop: latitude e6420 The answer to this question should address how to deploy RAID1 software wise on a dell latitude e6420. I have two Hitachi Z5K500 320GB drives (new). There is one hard drive (320GB capacity) in the system now, which contains the current installation that I would prefer to keep. The drive currently inside the laptop will be replaced with one of the Hitachi drives, and the other Hitachi drive will be fitted into the laptop by way of a Dell hard drive "caddy" enclosure, which inserts into the media bay of the laptop (you remove the cd-rom bay, insert hd-bay).

  Read the article

• getting html tags from xml and echoing in php?

  - by Whitney Sarah Rogers

  I am trying to echo a result from xml into my html code form expedia. But I ran into a problem. There text is a little messed up: <areaInformation> Distances are calculated in a straight line from the property&apos;s location to the point of interest or attraction, and may not reflect actual travel distance. &lt;br /&gt;&lt;br /&gt; Distances are displayed to the nearest 0.1 mile and kilometre. &lt;p&gt;La Isla Shopping Mall - 0.5 km / 0.3 mi &lt;br /&gt;Yamil Lu&apos;um - 0.5 km / 0.3 mi &lt;br /&gt;Acuario Interactivo - 0.6 km / 0.3 mi &lt;br /&gt;Luxury Avenue - 1.5 km / 0.9 mi &lt;br /&gt;Cancun Golf Club at Pok Ta Pok - 2.2 km / 1.3 mi &lt;br /&gt;Nautilus Diving and Training Center - 2.6 km / 1.6 mi &lt;br /&gt;Cancun Convention Center - 2.8 km / 1.7 mi &lt;br /&gt;Plaza Caracol - 2.8 km / 1.8 mi &lt;br /&gt;Playa Tortuga - 3.1 km / 1.9 mi &lt;br /&gt;Aquaworld - 3.6 km / 2.2 mi &lt;br /&gt;Playa Langosta - 4.1 km / 2.6 mi &lt;br /&gt;Museo de Arte Popular Mexicano - 4.6 km / 2.9 mi &lt;br /&gt;Playa Linda - 5 km / 3.1 mi &lt;br /&gt;Playa Delfines - 6.1 km / 3.8 mi &lt;br /&gt;El Rey Ruins - 6.2 km / 3.8 mi &lt;br /&gt;&lt;/p&gt;&lt;p&gt;The preferred airport for ME Cancun - Complete ME All Inclusive is Cancun, Quintana Roo (CUN-Cancun Intl.) - 14.3 km / 8.9 mi. &lt;/p&gt; </areaInformation> And I echo it in php: <div id="hotelInfo"><?php echo $areaInfo ?></div> And of course I get this in the browser window: Distances are calculated in a straight line from the property's location to the point of interest or attraction, and may not reflect actual travel distance. <br /><br /> Distances are displayed to the nearest 0.1 mile and kilometre. <p>La Isla Shopping Mall - 0.5 km / 0.3 mi <br />Yamil Lu'um - 0.5 km / 0.3 mi <br />Acuario Interac etc. How can I fix this??? Any help would be greatly apreciated! Thanks!

  Read the article

• Do you lose everything when you have a hard disk failure in a multi-hard disk LVM that does NOT use RAID?

  - by user72630

  I'm debating about using LVM for a media/file server because I would like to combine multiple physical hard disks into one volume. I do not wish to use any RAID in my LVM so my question is: If one of the multiple hard disks in my volume were to go down would I lose all my data or would I just lose the data that was stored on that individual disk? Also, if I were to just lose the data on the individual disk, would it be as simple as replacing that disk and restoring what was on it from a backup to recover? Thanks everyone.

  Read the article

• Dual boot windows 8 pro and windows 7 on XPS 8500 Special additon

  - by Jesse

  I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying where do you want to install windows at? pops up but none of my drives are listed. Please help me determine what is going on? I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK."

  Read the article

• Installing windows 8 into a new partition

  - by ACarter

  I've just gone through the Windows 8 upgrade process, and I am at the "Install now/Install by creating media/Install later from your desktop" stage. I've already got a sufficiantly big, empty partition, so can someone explain in fairly simple terms how to install onto the new partition? I would prefer not to burn the ISO onto a disk, it would be a lot easier if I could use a USB drive. (I've done quite a bit of googling, but all that I can find goes into endless detain about the partitioning, and spends very little time on putting the ISO on a booteable drive. How do I do this? Do I need to empty the drive? etc?)

  Read the article

• WP7 databinding displays int but not string?

  - by user1794106

  Whenever I test my app.. it binds the data from Note class and displays it if it isn't a string. But for the string variables it wont bind. What am I doing wrong? Inside my main: <Grid x:Name="ContentPanel" Grid.Row="1" Margin="12,0,12,0"> <ListBox x:Name="Listbox" SelectionChanged="listbox_SelectionChanged" ItemsSource="{Binding}"> <ListBox.ItemTemplate> <DataTemplate> <Border Width="800" MinHeight="60"> <StackPanel> <TextBlock x:Name="Title" VerticalAlignment="Center" FontSize="{Binding TextSize}" Text="{Binding Name}"/> <TextBlock x:Name="Date" VerticalAlignment="Center" FontSize="{Binding TextSize}" Text="{Binding Modified}"/> </StackPanel> </Border> </DataTemplate> </ListBox.ItemTemplate> </ListBox> </Grid> </Grid> in code behind: protected override void OnNavigatedTo(System.Windows.Navigation.NavigationEventArgs e) { MessageBox.Show("enters onNav Main"); DataContext = null; DataContext = Settings.NotesList; Settings.CurrentNoteIndex = -1; Listbox.SelectedIndex = -1; if (Settings.NotesList != null) { if (Settings.NotesList.Count == 0) { Notes.Text = "No Notes"; } else { Notes.Text = ""; } } } and public static class Settings { public static ObservableCollection<Note> NotesList; static IsolatedStorageSettings settings; private static int currentNoteIndex; static Settings() { NotesList = new ObservableCollection<Note>(); settings = IsolatedStorageSettings.ApplicationSettings; MessageBox.Show("enters constructor settings"); } notes class: public class Note { public DateTimeOffset Modified { get; set; } public string Title { get; set; } public string Content { get; set; } public int TextSize { get; set; } public Note() { MessageBox.Show("enters Note Constructor"); Modified = DateTimeOffset.Now; Title = "test"; Content = "test"; TextSize = 32; } }

  Read the article

• UPS compatible with Linux box?

  - by Somebody still uses you MS-DOS

  I'm buying this unit from deal extreme: it's a bitorrent downloader, with NAS capability. I'm interested in sharing an external HD in it, with media and backup purposes. I'm afraid of energy problems (don't know if this is the correct term), corrupting my mounted drives (like after a storm), so I thought about buying an UPS that sends a "signal" to my Linux box, and a script in my Linux box would unmout everything to avoid problems. Do this "UPS signal" feature exists? Do you have model suggestions? Thanks!

  Read the article

• current page highlights on child pages

  - by user557318

  Im trying to achieve current page highlights on wordpress similar to this site Alex Soth. I'm very nearly there with my css. At present i have current page highlights on pages, ie. home,calendar, projects. However when it come to current page highlights on child pages i have a problem. the indented child page list appears on hover when selecting a child page, but after page selection the menu reverts back to the standard pages menu with no visible child menus? unlike the link to the Alex Soth site where the extended menu stays and current page is highlighted I know that the answer will be a simple piece of css involving current_page_item and possible position:relative to obtain the menu staying visible after selection. But i can for the life of me work it out. Any ideas Ive attached my relivant pieces of css below?? thanks /* =Link Styles ------------------------------------------------------------------*/ input#submit { cursor: pointer; } input#searchsubmit { background: url(images/search.png) no-repeat center; } input#searchsubmit:hover { background: url(images/search.png) no-repeat center #3399FF !important; cursor: pointer; } .navigation a:hover, input#submit { background: #3399FF; color: #3399FF !important; } a { color: #666; } a:hover, a:hover span { color: #c11501 !important;background-color: #fae100; } .entry sup a, #main_nav .current_page_item a, #main_nav .current_page_ancestor a { color: #666 !important; } #main_nav h1.masthead a { color: #666; } #main_nav h1.masthead a:hover { border-right: none; } h2 a, #main_nav a { color: #3399FF; } img a, img a:hover { text-decoration: none; } .post a, .navigation a { font-weight: bold; color: #000; } .navigation a { background: #EEE; color: #666; font-weight: normal; padding: 3px 0px; border-radius: 0px; -webkit-border-radius: 0px; -moz-border-radius: 0px; } .post sup { font-size: 11px; color: #aaa; } .post sup a { border: 0; margin: 0; font-weight: normal; font-size: 10px; } #supplementary .post_nav ul.about_nav li a, #supplementary .post_nav ul.single_post_meta a, #supplementary ul.contact_key li a { color: #888888; border-bottom: 0; } /* =Main Menu ------------------------------------------------------------------*/ #main_nav ul.menu li { position: relative; } #main_nav ul.menu li:hover ul.sub-menu, #main_nav ul.menu li:hover ul.children { display: block; }

  Read the article

• Build Advise for Home Web/NAS Server with Ubuntu Server 12.04 [closed]

  - by razor7

  I need to have a personal Webserver with NAS capabilities. The Webserver to test some LAMP projects I develop for clients, and also NAS to be able to stream media to local network. I want to have full control of the box, so I'm planning to build it with some spare parts and Ubuntu Server. The services/software that will run are (remember, is for personal and testing use only): SAMBA/CIFS SSH Server Apache 2 MySQL 5 Mercurial Repo PHP 5.3 Ruby on Rails OwnCloud Dovecot Webmin Postfix PureFTPd ClamAV The Hardware: Intel Dual Core E2180 2.0 GHz MSI P35 Neo Kinkston 1GB DDR2, 667 MSI Nvidia 7300le PCIe x16 256mb RAM HDD SATA WD Green 2TB x2 (RAID-1 with MDADM RAID Controller) 16 GB USB Pendrive (For server system installation) My idea is to build this system, using the pendrive for the Ubuntu Server software, and packages, and the RAID-1 for gross data storage. What do you think? Thanks a lot!

  Read the article

• ScaleTransform and CenterX

  - by Vasco Correia

  I have the following code <Canvas Width="800" Height="600"> ... In the UserControl I animate the ScaleTranform to 1. I want UserControl to "grow" from its center, but it "grows" from the upper left corner of it. The values in CenterX and CenterY do nothing. How can I make it Scale as I want? Thanks in advance.

  Read the article

• Moving software RAID to Linux

  - by terman

  I'm using a RAID 1 (mirrored pair) configuration in my Media Center/ NAS system. Currently it's running Windows 8 (yeah, big mistake I know) and I'm regretting it (did it for the games, not worth it). Currently I'm having two software RAID 1s (3TB + 2TB) configured with Storage Spaces and unfortunately formatted with NTFS. Now I would like to switch to Fedora (or maybe Ubuntu if there are advantages) for good. Is there a way that I could continue using the disks as they are without the need to format them with ext or something? I'm glad for every tip. Oh, the system disk is of cause not in a raid configuration.

  Read the article

• How to populate the span tags between specific tags.

  - by Rachel

  I want to populate span tags for all text nodes between the self closing tags s1 and s2 having the same id.If the transformation of the input to the output form requires the list of ids of the s1 , s2 tag pairs say 1, 2 etc i can assume that it is in place in any form if required.The input can have any structure and not exactly the same as seen in the sample input. It can have any number of s1, s2 tag pairs but each pair will have a unique id. Hope i am clear. How can this be achieved using XSL? Input: <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>This is my title</title> </head> <body> <h1 align="center">This <s1 id="1" />is my <s2 id="1" />heading</h1> <p> Sample content <s1 id="2" />Some text here. Some content here. </p> <p> Here you <s2 id="2" />go. </p> </body> </html> Desired output: <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>This is my title</title> </head> <body> <h1 align="center">This <span id="1">is my </span>heading</h1> <p> Sample content <span id="2">Some text here. Some content here.</span> </p> <p> <span id="2">Here you </span>go. </p> </body> </html>

  Read the article

• Backup of "Leavers" network directory

  - by Mez

  I want to create a backup of a Leavers network home directory. I've generally done this before by just creating an iso with genisoimage and then burning it. However, it seems that the latest users have 10G in their files. For archival purposes, I want to be able to burn these to multiple DVDs. How do I create these DVD iso images (I know it's got something to do with tar and stream-media-size, and then how do I restore them if I need them again? Using Debian

  Read the article

• What are my options for booting OSX 10.6 when my DVD drive is broken?

  - by Kev

  I'm about to completely re-pave my Mac Mini but the DVD drive has died on me which means I can't boot from the installation media. I know I can boot from a USB stick but I don't have one available, what are my options given the following hardware at hand? Netgear ReadyNAS Duo NAS (NIC or USB only, no Firewire) USB HDD (no Firewire) I've ripped an ISO of the installation disk, can I somehow get the Mini to boot from this image using one of the above? If I decide not to re-pave but just upgrade, can the Mac be upgraded just using an OSX 10.6 ISO image on its disk?

  Read the article

• remove/ignore float from outer div

  - by acidzombie24

  This may sound weird but i have some css which aligns mys divs. In one place i also use http://www.brunildo.org/test/img_center.html which centers images. Now i want my divs inside a larger div to go to another line if this one gets full. float: left seems to be the answer. The problem is it ruins my formatting. Including solution in the above link. I have this test code. If i remove the width and float it looks fine except it may take up too much space and not go to another line. I was thinking i could use float on an outerdiv and center the image within. However float: left is still breaking it. I am hoping there is a way to remove the float so each div does go left but the div inside centers correctly not breaking my formatting. <style type="text/css"> .wraptocenter { display: table-cell; text-align: center; vertical-align: middle; width: 200px; height: 200px; background: blue; } .wraptocenter * { vertical-align: middle; } /*\*//*/ .wraptocenter { display: block; } .wraptocenter span { display: inline-block; height: 100%; width: 1px; } /**/ div.c { background: red; overflow: hidden; min-width: 400px; max-width: 400px; } div.c div { float: left; } </style> <!--[if lt IE 8]><style> .wraptocenter span { display: inline-block; height: 100%; } </style><![endif]--> <div class="c"> <div> <div> <div class="wraptocenter"><span></span><img src="a.jpg" alt="/a.jpg"></div> <div class="wraptocenter"><span></span><img src="a.jpg" alt="/a.jpg"></div> <div class="wraptocenter"><span></span><img src="a.jpg" alt="/a.jpg"></div> </div></div></div>

  Read the article

• ListBox content does not resize when window is made smaller

  - by DamonGant

  I'm using .NET 4.0 (not .NET 4.0 CP) and have run into this kinda unique issue. I created a ListBox to display bound elements, first off here is (a part) of my XAML. <Grid Grid.Row="2" Background="#EEEEEE"> <Border Margin="6,10,10,10" BorderBrush="#666666" BorderThickness="1"> <ListBox ItemsSource="{Binding}" Name="appList" BorderThickness="0" HorizontalContentAlignment="Stretch" HorizontalAlignment="Stretch"> <ItemsControl.ItemTemplate> <DataTemplate> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="80" /> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions> <Border Grid.Column="0" Margin="5" BorderThickness="3" CornerRadius="2" BorderBrush="Black" HorizontalAlignment="Left" VerticalAlignment="Top" x:Name="ItemBorder"> <Image Width="64" Height="64" Source="{Binding Path=IconUri}" Stretch="UniformToFill" /> </Border> <StackPanel Margin="0,5,5,5" Grid.Column="1" Orientation="Vertical" HorizontalAlignment="Stretch"> <TextBlock FontSize="18" Text="{Binding Path=DisplayName}" /> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="*" /> <ColumnDefinition Width="60"/> </Grid.ColumnDefinitions> <ProgressBar Grid.Column="0" Height="24" HorizontalAlignment="Stretch" IsIndeterminate="{Binding Path=IsDiscovering}" Value="{Binding Path=PercentageDownloaded}" /> <TextBlock Grid.Column="1" HorizontalAlignment="Center" VerticalAlignment="Center"><TextBlock x:Name="percentageDownloaded" /><TextBlock x:Name="percentageMeter">%</TextBlock></TextBlock> </Grid> </StackPanel> </Grid> <DataTemplate.Triggers> <DataTrigger Binding="{Binding Path=IsDiscovering}"> <DataTrigger.Value>True</DataTrigger.Value> <Setter TargetName="percentageDownloaded" Property="Text" Value="N/A" /> <Setter TargetName="percentageMeter" Property="Visibility" Value="Collapsed" /> </DataTrigger> <DataTrigger Binding="{Binding Path=IsDiscovering}"> <DataTrigger.Value>False</DataTrigger.Value> <Setter TargetName="percentageDownloaded" Property="Text" Value="{Binding Path=PercentageDownloaded}" /> <Setter TargetName="percentageMeter" Property="Visibility" Value="Visible" /> </DataTrigger> </DataTemplate.Triggers> </DataTemplate> </ItemsControl.ItemTemplate> </ListBox> </Border> </Grid> Sizing the window up stretches the ListBox content just fine, but when I size it down, it retains it's width and spawns vertical scrollbars.

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >