Search Results

Search found 7897 results on 316 pages for 'generate'.

Page 278/316 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

  - by Kevinoid

  Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated. Update (2011-06-26) After failing to solve the problem, I resorted to paid Microsoft support. They were unable to solve the problem. Since then I have implemented a solution based on Linux that is working quite well. I will attempt to evaluate any proposed answers as best I can, but current configurations and time constraints will make this slow...

  Read the article

• Multi-Role Domain Controllers for Small Offices (< 50 clients)

  - by kce

  Warning: I'm a Linux/*NIX admin so this is all new to me. I understand that it's not considered a good idea to have only a single domain controller, and that it is also probably a good idea for a domain controller to only do AD/DHCP/DNS (Here). We have two offices, location A with 30 users and location B with 10 users. Our two offices are separated by a WAN that is not particularly robust so I have be instructed that we need to have standalone services in each office. This means that according to "best practices" we will need to build a domain controller and a separate file server in each office. Again, I am not knowledgeable in the ways of Windows but this seems a little unnecessary for an organization of 40 users. People have commented that I could "get away with" running file services on the domain controller as long as the "load is light". That just seems to generate more questions than it answers. What constitutes light load? What are the potential consequences of mixing these roles? Ideally I would prefer to only have one physical machine at each location. The one in location A (the location with IT staff) can act as the primary domain controller and the one in the smaller office can act as the backup domain controller. If either domain controller fails we can still use the other one for authentication (albeit with some latency) and if the WAN connection fails each office still has access to their respective "local" domain controller. If the file services are ALSO run on each server (and synchronized with something like DFS), a similar arrangement in terms of redundancy can be had without having to purchase, build and install two additional separate servers. It's not that I'm adverse to that (well, any more adverse than I am to whole thing to begin with) but to my simple mind it just seems, well a bit overkill. I can definitely see the benefits of functional separation when we're talking larger organizations, but I need to consider the additional overhead too. None of this excludes having a DRP setup for the domain controller/s. I assume you can lose two domain controllers just as easily as one.

  Read the article

• Static IPv6 address in Windows unused for outgoing connections

  - by Luc

  I'm running a Windows server and trying to get it to use a static IPv6 address for outgoing connections to other IPv6 hosts (such as Gmail). I need this because Gmail requires a ptr record, and I can't set one for random addresses. The static address is configured on the host, but it also has a temporary privacy address as well as a random address from the router it seems. By default Windows uses the privacy address; it seems this is the expected behavior (and it makes perfect sense for people/users that did not set a static address, but I did!). I've tried disabling the privacy address with: netsh int ipv6 set privacy disabled This indeed gets rid of the privacy address, but I still have the random address that the router assigned. To disable this, it was said I needed to disable "router discovery" using this command: net interface ipv6 set interface 14 routerdiscovery=disabled Upon doing this, all IPv6 connectivity is lost. If I do this while pinging Gmail, it will report "Destination host unreachable" as soon as I enter the command. In the static IPv6 configuration, I did configure the default gateway and prefix length, so I don't see why it's unable to connect. Probably has something to do with the lack of ARP in IPv6 and somehow being unable to resolve the router's MAC, but I wouldn't know how to fix this. Finally I've tried disabling the DHCPv6 lease with these commands: netsh interface ipv6 set interface "IDMZ Team" managedaddress=disabled netsh interface ipv6 set interface "IDMZ Team" otherstateful=disabled Which was to no avail; the host continues to obtain and use the router-assigned IPv6 address. The router is a FritzBox 7340, which shows me all the IPv4 and IPv6 addresses that the host (identified by MAC) utilizes, but I'm unable to change the assigned address. Maybe this could be done over the telnet interface of the router somehow, but again, I wouldn't know how to do this even if it's the way to go. In short, any of the following would probably solve my problem: Change Windows' source address selection behavior. Have Windows not get an address from the router and not generate a privacy address; Have the router hand out a static address and make Windows use that as source address. Recover connectivity after disabling router discovery on Windows. Alternatively I might use some (batch, perl, ...) script to throw away all IPv6 addresses except the desired one, but this feels rather hacky. If it's the only way (or less hacky than another hacky solution), it might be an option though. Thanks!

  Read the article

• Making application behind reverse proxy aware of https

  - by akaIDIOT

  https in tomcat being the hassel it is, I've been trying to get an Axis2 webapp to work behind a reverse proxy for ages now, can't seem to get it to work. The proxying itself works like a charm, but the app fails to generate 'links' (or ports as it concerns SOAP) using https. It would seem I need some way to let Axis2 know it is being accessed through https, even though the actual transport to it is done over http (proxied from localhost). The nginx config that proxies https to localhost:8080: server { listen 443; server_name localhost; ssl on; ssl_certificate /path/to/.pem ssl_certificate_key /path/to/.key; ssl_session_timeout 5m; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; ssl_prefer_server_ciphers on; location / { # force some http-headers (avoid confusing tomcat) proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; # pass requests to local tomcat server listening on default port 8080 proxy_pass http://localhost:8080; } } The proxy itself works fine, the info pages of the webapp work. The problem lies in the ports generated in the .wsdl: <wsdl:service name="WebService"> <wsdl:port name="WebServiceHttpSoap11Endpoint" binding="ns:WebServiceSoap11Binding"> <soap:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpSoap11Endpoint/"/> </wsdl:port> <wsdl:port name="WebServiceHttpSoap12Endpoint" binding="ns:WebServiceSoap12Binding"> <soap12:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpSoap12Endpoint/"/> </wsdl:port> <wsdl:port name="WebServiceHttpEndpoint" binding="ns:WebServiceHttpBinding"> <http:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpEndpoint/"/> </wsdl:port> </wsdl:service> The Host header does its job; it shows 10.10.3.96 in stead of localhost, but as the snippet shows: it says http:// in front of it in stead of https://. My client app can't deal with this... Adding proxyPort and proxyName to the tomcat6 server.xml in the default <Connector> doesn't help; I'm at a loss on how to get this to work properly.

  Read the article

• Apache2 graceful restart stops proxying requests to passenger

  - by Rob

  Issue with apache mod proxy, it stops proxying requests after a graceful restart but not all the time. It seems to happen only on a Sunday when a graceful restart is triggered by logrotate. [Sun Sep 9 05:25:06 2012] [notice] SIGUSR1 received. Doing graceful restart [Sun Sep 9 05:25:06 2012] [notice] Apache/2.2.22 (Ubuntu) Phusion_Passenger/3.0.11 configured -- resuming normal operations [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(492) failed in child 26153 for worker proxy:reverse [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(486) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(487) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(489) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(490) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(491) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(480) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(481) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(483) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(484) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(485) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(479) failed in child 26153 for worker http://api.myservice.org/motd.html After these lines, the logs are flooded with 404's because the requests are not being proxied. It's worth noting that the destination is just another vhost on the same apache instance, but the vhost (http://api.myservice.org) is serving passenger (mod_rails) I was thinking that maybe there's some startup issues with the passenger workers not being ready during a graceful restart? After a full restart resolves it and everything returns to normal. //Edit Here's the vhost config, thanks :) <VirtualHost *:80> UseCanonicalName Off LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon <Directory /var/www/vhosts> RewriteEngine on AllowOverride All </Directory> RewriteEngine on RewriteCond /var/www/vhosts/%{SERVER_NAME} !-d RewriteCond /var/www/vhosts/%{SERVER_NAME} !-l RewriteRule ^ http://sitenotfound.myservice.org/ [R=302,L] VirtualDocumentRoot /var/www/vhosts/%0/current # Rewrite requests to /assets to map to the /var/file-store/<SERVER_NAME>/ RewriteMap lowercase int:tolower RewriteCond %{REQUEST_URI} ^/assets/ RewriteRule ^/assets/(.*)$ /var/file-store/${lowercase:%{SERVER_NAME}}/$1 # Map /login to /editor.html as it's far friendlier. RewriteCond %{REQUEST_URI} ^/login RewriteRule .* /editor.html [PT] # Forward some requests to the API ProxyPass /api http://api.myservice.org/api ProxyPass /site.json http://api.myservice.org/api/editor/site ProxyPassMatch ^/editor/(.*)$ http://api.myservice.org/editor/$1 ProxyPassMatch ^/api/(.*) http://api.myservice.org/api/$1 ProxyPass /build http://api.myservice.org/build ProxyPass /help http://api.myservice.org/help ProxyPass /motd.html http://api.myservice.org/motd.html <Proxy *> Order allow,deny Allow from all </Proxy> # TODO generate slightly more specific Error Documents for 401/403/500's, # but for now the 404 page is good enough ErrorDocument 401 /404.html ErrorDocument 403 /404.html ErrorDocument 404 /404.html ErrorDocument 500 /404.html </VirtualHost>

  Read the article

• Postfix: Relay access denied

  - by Joseph Silvashy

  When I telnet to my server thats running postfix and try to send an email: MAIL FROM:<[email protected]> #=> 250 2.1.0 Ok RCPT TO:<[email protected]> #=> 554 5.7.1 <[email protected]>: Relay access denied I couldn't really find the answer on the site or by looking at other users question/answers, I'm not sure where to start. Ideas? Update So basically looking at the docs: http://www.postfix.org/SMTPD_ACCESS_README.html (section: Getting selective with SMTP access restriction lists), I don't seem to have any of those directives in etc/postfix/main.cf like smtpd_client_restrictions = permit_mynetworks, reject or any of the other ones, so I'm quite confused. But really I'm going to have a rails app connect to the server and send the emails, so I'm not sure how to handle it. Here is what my config file looks like: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = rerecipe-utils alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost, mail.rerecipe.com, rerecipe.com relayhost = mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all mynetworks = 127.0.0.0/8 204.232.207.0/24 10.177.64.0/19 [::1]/128 [fe80::%eth0]/64 [fe80::%eth1]/64 Something to note is that relayhost is blank, this is the default configuration file that was created when I installed Postfix, when testing to connect with openssl I get this: ~% openssl s_client -connect mail.myhostname.com:25 -starttls smtp CONNECTED(00000003) depth=0 /CN=myhostname verify error:num=18:self signed certificate verify return:1 depth=0 /CN=myhostname verify return:1 --- Certificate chain 0 s:/CN=myhostname i:/CN=myhostname --- Server certificate -----BEGIN CERTIFICATE----- MIIBqTCCARICCQDDxVr+420qvjANBgkqhkiG9w0BAQUFADAZMRcwFQYDVQQDEw5y ZXJlY2lwZS11dGlsczAeFw0xMDEwMTMwNjU1MTVaFw0yMDEwMTAwNjU1MTVaMBkx FzAVBgNVBAMTDnJlcmVjaXBlLXV0aWxzMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQDODh2w4A1k0qiPNPhkrPj8sfkxpKPTk28AuZhgOEBYBLeHacTKNH0jXxPv P3TyhINijvvdDPzyuPJoTTliR2EHR/nL4DLhr5FzhV+PB4PsIFUER7arx+1sMjz6 5l/Ubu1ppMzW9U0IFNbaPm2AiiGBQRCQN8L0bLUjzVzwoSRMOQIDAQABMA0GCSqG SIb3DQEBBQUAA4GBALi2vvk9TGKJubXYJbU0PKmVmsfzFK35yLqr0keiDBhK2Leg 274sWxEH3ds8mUaRftuFlXb7RYAGNlVyTuMTY3CEcnqIsH7F2McCUTpjMzu/o1mZ O/B21CelKetBd1u79Gkrv2vWyN7Csft6uTx5NIGG2+pGi3r0gX2r0Hbu2K94 -----END CERTIFICATE----- subject=/CN=myhostname issuer=/CN=myhostname --- No client certificate CA names sent --- SSL handshake has read 1203 bytes and written 360 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 1AA4B8BFAAA85DA9ED4755194C50311670E57C35B8C51F9C2749936DA11918E4 Session-ID-ctx: Master-Key: 9B432F1DE9F3580DCC6208C76F96631DC5A4BC517BDBADD5F514414DCF34AC526C30687B96C5C4742E9583555A118232 Key-Arg : None Start Time: 1292985376 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN Oddly enough when I try to send an email from the machine itself it does work: echo test | mail -s "test subject" [email protected]

  Read the article

• Core i7 c1e and speedstepping - BSOD on shutdown

  - by DeaconDesperado

  I'm having an interesting problem with my recent Core i7 Digital Audio workstation build that I am curious to see if others have encountered. First, here are the specs on the machine. ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB Intel Core i7-950 3.06Ghz 8M LGA1366 CPU CORSAIR DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Western Digital Caviar Black WD5001AALS 500GB Plus a couple ASUS optical drives and a 750W Corsair PSU. Running Windows 7 x64. All this is connected to the nefarious Digi 002 firewire audio interface for use with Pro Tools. I following mostly the specs posted by many other I7 users in the digidesign community who pooled their collective knowledge in this thread. Now after completing my build, I fell victim to the "UD5 squeal" described at that forum thread. So taking the advice posted, I disabled c1e advanced halt state and Intel speed stepping (I would likely have done this anyway to maintain a stable clock, power consumption isn't really a relevant concern on this machine.) I enabled XMP to set the ram timings properly as well. What I am experiencing is a BSOD upon shutdown, but only immediately after windows fully exits and ends all processes. The error is a MACHINE_CHECK_EXCEPTION 0x000000. The funny thing is that it is extremely intermitent and only occurs if the shutdown immediately followed a period of relative idleness. It does not a generate a minidump, I suspect because windows monitoring has terminated by the time this error occurs. No damage is evident and one can simply turn off manually and the system will act as though a proper shutdown had occurred. If anything it is a annoyance, I just want to be certain it is not affecting my long term stability. I have read that the i7 950 does not like DRAM voltages past 1.65, but that they are acceptable if they are within .5 of the BLCK setting. I have tried disabling XMP and setting all timings to auto and the problem still manifests in an identical way. It is suspect that the cpu idleness preceding shutdown is the determining factor, as both c1e and speedstepping are both settings intended to modify handling of this state. Any suggestions or prior experiences would be greatly appreciated. EDIT: The behavior very closely resembles what's described in this thread: http://www.tomshardware.com/forum/12003-63-shut-problem-windows The benign nature of it of is identical. I can't seem to download the hotfix cited there however.

  Read the article

• "Error 1067: The process terminated unexpectedly" when trying to install MySQL on Win7 x64.

  - by Gravitas

  Hi, I've run into a brick wall trying to install MySQL v5.5 on my machine. My PC is Windows 7 x64, Enterprise edition. MySQL installs fine, but when I run the "MySQL Instance Configuration Wizard", it pauses forever on the step "Start Service" (I can let it run for 30 minutes with no response). If I go into services, I see that the "MySQL" service hasn't started, and if I try to start it, it says "Windows could not start MySQL Service on Local Computer. Error 1067: The process terminated unexpectedly." I've tried the following: Turning off firewall. Uninstalling all antivirus software. Installing / reinstalling 32-bit version of MySQL. Installing / reinstalling 64-bit version of MySQL. Uninstalling, deleting the contents of "C:\program files\MySQL" and "C:\program files (x86)\MySQL", reinstalling. Checking to see that there is no rogue services named MySQL???? (from a previous install). Checking that port 3306 is not used by an alternate program. Changing the default port that MySQL uses. Checking for "my.ini" and "my.ini.cnf" in "C:\windows" (nothing there but that can cause a problem). Running both MySQL installer, and configuration wizard, in "Adminstrator mode". Turning off UAC. Installing with defaults, not changing anything. Rebooting my machine (about 6 reboots so far). Opening up port 3306 in the firewall (both TCP and UDP, inbound and outbound). Swearing at the klutz of a programmer who designed MySQL so you can't even install it (as if that would help!) My machine is working 100% in every other way. InfiniDB (a MySQL compatible database) installs 100%, as does Visual Studio 2010, Microsoft SQL Server, etc, etc. Your advice on how to work around this? p.s. Here is the screen it got stuck on for 15 minutes until I killed the process: Update 2010-12-20 Tried MySQL v5.1, it didn't work either. Its amazing - if you type "mysqld /?", or "mysqld -help", it doesn't give you any help. And, if you try to restart the service manually, it doesn't display any error messages. Could it be any more unhelpful? Update 2010-12-21 Installed MySQL 6.0 alpha, and it worked. However, I'd rather not use an alpha release, given that the "stable" release is anything but :( Update 2010-12-21 Found http://dev.mysql.com/doc/refman/5.1/en/windows-troubleshooting.html, dealing with troubleshooting under Windows. Discovered that you can generate an error log if the service doesn't start - see here: http://dev.mysql.com/doc/refman/5.1/en/error-log.html

  Read the article

• Generating/managing config files for hosted application

  - by mfinni

  I asked a question about config management, and haven't seen a reply. It's possible my question was too vague, so let's get down to brass tacks. Here's the process we follow when onboarding a new customer instance into our hosted application : how would you manage this? I'm leaning towards a Perl script to populate templates to generate shell scripts, config files, XML config files, etc. Looking briefly at CFengine and Chef, it seems like they're not going to reduce the amount of work, because I'd still have to manually specify all of the changes/edits within the tool. Doesn't seem to be much of a gain over touching the config files directly. We add a stanza to the main config file for the core (3rd-party) application. This stanza has values that defines the instance (customer) name the TCP listener port for this instance (not one currently used) the DB2 database name (serial numeric identifier, already exists, they get prestaged for us by the DBAs) three sub-config files, by name - they need to be created from 3 templates and be named after the instance The sub-config files define: The filepath for the DB2 volumes The filepath for the storage of objects The filepath for just one of the DB2 volumes (yes, redundant to the first item. We run some application commands, start the instance We do some LDAP thingies (make an OU for the instance, etc.) We add a stanza to the config file for our security listener that acts as a passthrough to LDAP instance name LDAP OU TCP port for instance DB2 database name We restart the security listener (off-hours), change the main config file from item 1, stop and restart the instance. It is now authenticating via LDAP. We add the stop and start commands for this instance to the HA failover scripts. We import an XML config file into the instance that defines things for the actual application for the customer - user names, groups, permissions, and business rules. The XML is supplied by the implementation team. Now, we configure the dataloading application We add a stanza to the existing top-level config file that points to a new customer-level config file. The new customer-level config file includes: the instance (customer) name the DB2 database name arbitrary number of sub-config files, by name Each of the sub-config files defines: filepaths to the directories for ingestion, feedback, backup, and failure those filepaths have a common path to a customer-specific folder, and then one folder for each sub-config file Each of those filepaths needs to be created We need to add this customer instance to our monitoring scripts that confirm the proper processes are running and can be logged into. Of course, those monitoring config files include the instance name, the TCP port, the DB2 database name, etc. There's also a reporting application that needs to be configured for the new instance. You get the idea. There's also XML that is loaded into WAS by the middleware team. We give them the values for them to plug into the XML - they could very easily hand us the template and we could give them back completed XML.

  Read the article

• Setting font size of Closed Captions on iPhone using ffmpeg or mencoder

  - by forthrin

  Does anyone know how to either: Make ffmpeg set subtitle font size in the output video file Make mencoder produce an iPhone-compatible video file (with subtitles) I finally found out how to get Closed Captions video on iPhone, with mkv and srt files as source material. The secret was using the mov_text subtitle codec in ffmpeg (and turning on Closed Captions in the iPhone settings of course): ffmpeg -y -i in.mkv -i in.srt -map 0:0 -map 0:1 -map 1:0 -vcodec copy -acodec aac -ab 256k -scodec mov_text -strict -2 -metadata title="Title" -metadata:s:s:0 language=eng out.mp4 However, the font size appears very small on the iPhone, and I can't find out how to set it with ffmpeg (the iPhone has no option for this). I found out that mencoder has a -subfont-text-scale option, but I don't have a lot of experience with this program. The following, my best attempt so far, produces an output file which is not playable on the iPhone. sudo port install mplayer +mencoder_extras +osd mencoder in.mkv -sub in.srt -o out.mp4 -ovc copy -oac faac -faacopts br=256:mpeg=4:object=2 -channels 2 -srate 48000 -subfont-text-scale 10 -of lavf -lavfopts format=mp4 PS! As requested, here is the output from mencoder: 192 audio & 400 video codecs success: format: 0 data: 0x0 - 0xb64b9d2f libavformat version 54.6.101 (internal) libavformat file format detected. [matroska,webm @ 0x1015c9a50]Unknown entry 0x80 [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (ac3), -aid 0, -alang eng VIDEO: [H264] 1280x544 0bpp 49.894 fps 0.0 kbps ( 0.0 kbyte/s) [V] filefmt:44 fourcc:0x34363248 size:1280x544 fps:49.894 ftime:=0.0200 ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.23.100 (internal) AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000) Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3) ========================================================================== ** MUXER_LAVF ***************************************************************** REMEMBER: MEncoder's libavformat muxing is presently broken and can generate INCORRECT files in the presence of B-frames. Moreover, due to bugs MPlayer will play these INCORRECT files as if nothing were wrong! ******************************************************************************* OK, exit. videocodec: framecopy (1280x544 0bpp fourcc=34363248) VIDEO CODEC ID: 28 AUDIO CODEC ID: 15002, TAG: 0 Writing header... [mp4 @ 0x1015c9a50]Codec for stream 0 does not use global headers but container format requires global headers [mp4 @ 0x1015c9a50]Codec for stream 1 does not use global headers but container format requires global headers Then the following repeats itself for every frame: Pos: 0.0s 1f ( 2%) 0.00fps Trem: 0min 0mb A-V:0.000 [0:0] [mp4 @ 0x1015c9a50]malformated aac bitstream, use -absf aac_adtstoasc Error while writing frame. I recognize -absf aac_adtstoasc as an ffmpeg option (does mencoder spawn ffmpeg?), but I don't know how to pass this option on (my hunch is this is not even the origin of the problem).

  Read the article

• Windows Service Limit Crashes Services on Startup

  - by Paul Williams

  We have developed a custom Windows service in C# as part of a large Enterprise application. Our QA department tests multiple versions of this service. The QA lab has several (over 20) copies of this service installed on one Windows 2003 test box. Each copy is in its own folder and has a unique service name, though each executable file is named the same (OurWindowsService.exe, for example). Each service uses the same Windows credentials (a domain user). The purpose of this service is to handle MSMQ messages. The queued messages do all sorts of important stuff. For some reason, they can run only 5 of these services at a time. When we start a 6th, the service crashes on startup. For example, I can start #1, #2, #3, #4, and #5. When I start #6, it crashes. However, if I stop #1 and start #6, #6 runs fine, and now #1 fails to start. When the services crash, the following error appears in the Windows event log: Faulting application OurWindowsService.exe, version 5.40.1.1, faulting module kernel32.dll, version 5.2.3790.4480, fault address 0x0000bef7. I was able to use WinDbg to generate a postmortem dump file. The dump file revealed that the crash occurs trying to delay load SHLWAPI.dll: 0:000> kb100 ChildEBP RetAddr Args to Child 0012ece4 79037966 c06d007e 00000000 00000001 KERNEL32!RaiseException+0x53 0012ed4c 790099ba 00000008 0012ed08 7c82860c mscoree!__delayLoadHelper2+0x139 0012ed98 790075b1 001550c8 0012edac 0012fb34 mscoree!_tailMerge_**SHLWAPI_dll**+0xd 0012edb0 79007623 001550c8 0012edf8 0012edf4 mscoree!XMLGetVersionWithSupported+0x22 0012ee00 790069a4 aa06f1b0 00000000 000001fe mscoree!RuntimeRequest::GetRuntimeVersion+0x56 0012f478 790077aa 00000001 7903fb4c 0012fb34 mscoree!RuntimeRequest::ComputeVersionString+0x5bd 0012f89c 79007802 00000001 0012f8b4 7903fb4c mscoree!RuntimeRequest::FindVersionedRuntime+0x11c 0012f8b8 79007b19 00000001 00000000 aa06fa6c mscoree!RuntimeRequest::RequestRuntimeDll+0x2c 0012ffa4 79007c02 00000001 0012ffbc 00000000 mscoree!GetInstallation+0x72 0012ffc0 77e6f23b 00000000 00000000 7ffdf000 mscoree!_CorExeMain+0x12 0012fff0 00000000 79007bf0 00000000 78746341 KERNEL32!BaseProcessStart+0x23 I believe the error code handed to Kernel32.RaiseException, c06d007e, means Module Not Found, but I'm not certain. Does this sound familiar to anyone? Are we hitting some limit on the number of service instances on some file name? Does MSMQ dislike more than 5 listening services?

  Read the article

• Why is the server performance so poor? What can be done to improve the speed of the server?

  - by fslsyed

  Very slow processing using Windows Server2008 R2 Standard with Service Pack One. Situation: Read a text file using the text data to populate a series of MS Sql tables. The converted data is used to generate monthly PDF invoice files; the PDF files are saved directly to the hard drive. The application is multi-threading with one thread used for the text conversion and three threads for PDF invoice generation. The text conversion is occurring concurrently with the invoice generation. Application Software: C# using Microsoft Visual Studio 2010 Ultimate. Crystal Report Writer 2011 with runtime 13_0_3 64 bit version. Targeted platform is x64; also tested as x86, and Any CPU with similar results. Microsoft .NET Framework 4.0. Microsoft Sql 2008 Issue: The software is running very slowly. The conversion of the text file is approximately six hundred fifty records per second and generation of the PDF files is approximately twelve invoices per minute. The text file to be converted is six hundred Meg with seven thousand invoices to be generated. The software was installed on three different machines from the same distribution files. The same text file was converted on each machine. The user executing the application was an administrator on each machine. The only variances were the machine and operating system. The configurations are as follows: Server: Operating System: Windows Server2008 R2 Standard 64-bit (6.1, Build7601) SP1 Service Pack: System Manufacturer: IBM System Model: System x3550 M3-[7944AC1]- BIOS: Default System BIOS Processor: Intel® Xeon® CPU E5620@ 2.4GHz (16 CPUs) Memory: 16384MB Notebook: Operating System: Windows 7 Home Premium Standard 64-bit (6.1, Build7601) System Manufacturer: Hewlett-Packard System Model: HP Pavilion dv7 Notebook PC BIOS: Default System BIOS Processor: AMD Phenom II N640 Dual-Core Processor 2.9GHz (2 CPUs) Memory: 6144MB Desktop: Operating System: Windows 7 Professional 64-bit (6.1, Build7601) SP1 System Manufacturer: Dell Inc. System Model: OptiPlex 960 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A11 Processor: Intel Core™2 Quad CPU Q9650 @3.00GHZ (4 CPUs) Memory: 16384MB Processing results per machine: The applications were executed seven times with the averages being displayed below. Machine Text Records Invoices Generated Converted Per Minute Per Minute Server (1) 650 12 Notebook 980 17 Desktop 2,100 45 (1) The server is dedicated to execution of this application; no additional applications are being executed. Question: Why is the server performance so poor? What can be done to improve the speed of the server?

  Read the article

• How can I fix Problems with interlaced video jerking/flicking when playedback on DVD players? (Mixin

  - by Simon P Stevens

  I'm trying to make a DVD and the final DVD jerks when played on standalone DVD players. It seems to play fine on PCs. I think the problem may be to do with interlacing settings when rendering the final output, but I'll outline the whole editing process I have followed in case I've made a mistake somewhere else. Most of the footage comes from a sony handy cam (one of those mini DVD ones) so isn't great quality. It was set to "high quality" (haha) and 16:9 aspect ratio when it was recorded. I copy the files directly from the mini DVDs onto the hard drive and import them into Cinelerra. In Cinelerra I set the format to 25fps, 720x576, RGBA-8bit, 16:9, interlaced bottom fields first. When I've finished the editing, I add a Fields to frames effect (set to bottom first) to each video track. I render to audio and video separately: Audio: AC3, 128kbps Video: YUV4MPEG steam, video pipe settings: ffmpeg -f yuv4mpegpipe -i - -y -target dvd -flags +ilme+ildct mpeg2video % Cinelerra often crashes during the rendering, so I set it to generate a new video file at each label, and combine them using cat when I've got a sucesful render of each one. Once I've combined them, I use mencoder to re-index them: mencoder -forceidx -oac copy -ovc copy merged.m2v -o mergedReIndexed.m2v I combine the audio and video files using ffmpeg: ffmpeg -i AudioFile.ac3 -i VideoFile.m2v -target dvd -flags +ilme+ildct FinalMovie.mpg Then I build the menus with spumux and I create the DVD file system with dvdauthor, and finally I write it do a dvd-r like this: nice -n -20 growisofs -dvd-compat -speed=2 -Z /dev/dvd -dvd-video -V VIDEO ./ && eject /dev/dvd Originally, when I did it the DVD flickered badly, so as suggested in a guide I added the fields to frames effect in cinelerra. Now it doesn't "flicker", but has become "jerky" when there is lots of motion, particularly when the camera is moving, so the whole background moves. This is what I've tried so far: Removed "mpeg2video" from cinelerra video render pipe. Removed +ilme from render pipe. Removed +ildct from render pipe. Removed +ilme from render audio/video rejoin command. Removed +ildct from render audio/video rejoin command. Added -alt to render pipe. Added -alt to render audio/video rejoin command. Tried with and without the frames to fields effect in Cinelerra. and various combinations of the above. I've also tried this: change the Cinelerra fps to 50, use fields to frames (instead of frames to fields), render to an intermediate QTforlinux jpeg video stream, re-importing that back into Cinelerra, adding a frames to fields effect and then rendering that output as normal (@25fps), and I still have the same problem. Has anyone experienced this "jerking" playback before? Can anyone give any suggestions on how to fix it? (Like I say, it plays back fine on a PC, but not on any of the standalone players I've tried)

  Read the article

• Postfix + SASLAUTHD + MySQL authentication problems

  - by Or W

  I've been trying to sort this out for the past 6 hours or so, this is the error message I'm facing (Running CentOS x64): /var/log/maillog: Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: SASL authentication failure: Password verification failed Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: bzq-79-177-192-133.red.bezeqint.net[79.177.192.133]: SASL PLAIN authentication failed: authentication failure Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: bzq-79-177-192-133.red.bezeqint.net[79.177.192.133]: SASL LOGIN authentication failed: authentication failure /var/log/messages: Jun 22 20:15:38 ptroa saslauthd[9401]: do_auth : auth failure: [user=myuser] [service=smtp] [realm=domain.com] [mech=pam] [reason=PAM auth error] I have dovecot installed as well and I'm able to receive emails via the MySQL authentication. The problem is when I'm trying to use SMTP to send out emails. Some config files: /etc/postfix/main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = Server Message biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = domain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination virtual_create_maildirsize = yes virtual_maildir_extended = yes proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_cano$ virtual_transport = dovecot dovecot_destination_recipient_limit = 1 /etc/default/saslauthd: START=yes DESC="SASL Authentication Daemon" NAME="saslauthd" MECHANISMS="pam" MECH_OPTIONS="" THREADS=5 OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd -r" /etc/pam.d/smtp: #%PAM-1.0 #auth include password-auth #account include password-auth auth required pam_mysql.so user=mail_admin passwd=password host=127.0.0.1 db=mail table=users usercolumn=email passwdcolumn=password crypt=1 verbose=1 account sufficient pam_mysql.so user=mail_admin passwd=password host=127.0.0.1 db=mail table=users usercolumn=email passwdcolumn=password crypt=1 verbose=1

  Read the article

• PHP-FPM performing worse than mod_php

  - by lordstyx

  Recently the website I maintain has been growing a lot and I saw the point coming where I'd want to switch from apache to nginx, because I kept on reading that it performs way better. Now I've done the switch, and I have to say, nginx is keeping up just fine. However, php-fpm is forming a problem. Where the php pages used to take 0.1 second to generate with the same load they now take around 3 seconds! Furthermore the error.log from nginx is being spammed with errors like: upstream timed out (110: Connection timed out) while connecting to upstream, client: ... I also tried using unix sockets instead, but those would complain about the following: connect() to unix:/tmp/php5-fpm.sock failed (11: Resource temporarily unavailable) while connecting to upstream I've fiddled with settings here and there but nothing seems to work. Changing the amount of pm.max_children doesn't seem to help a lot either, but with it's current amount at 350 it seems to be the lesser of all evil. The server that's being used has 3 GB RAM (not all of it is free due to a MySQL server also running) along with 2 dual-core processors (4 cores in total). Am I doing something majorly wrong with the settings here, or is the server simply not capable enough? EDIT: Here is the nginx server block server { listen 80; listen [::]:80 default ipv6only=on; root /var/www; index index.php index.html index.htm; server_name localhost; location / { try_files $uri $uri/ /index.html; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; deny all; } location = /50x.html { root /usr/share/nginx/www; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini try_files $uri = 404; # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } location ~ /\.ht { deny all; } } And the php-fpm pool: [www] user = www-data group = www-data listen = 127.0.0.1:9000 ;listen = /tmp/php5-fpm.sock listen.backlog = -1 pm = dynamic pm.max_children = 350 pm.start_servers = 200 pm.min_spare_servers = 10 pm.max_spare_servers = 350 pm.max_requests = 1536 rlimit_files = 65536 rlimit_core = unlimited chdir = /

  Read the article

• Ubuntu and Postfix Configuration Issues

  - by Obi Hill

  I recently installed postfix on Ubuntu Natty. I'm having a problem with the configuration. Firstly here is my postfix configuration file: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = $myorigin myhostname = mail.nairanode.com alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 mydestination = $myorigin, $myhostname, localhost.localdomain, , localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #mynetworks_style = host # ADDITIONAL unknown_local_recipient_reject_code = 550 maximal_queue_lifetime = 7d minimal_backoff_time = 1000s maximal_backoff_time = 8000s smtp_helo_timeout = 60s smtpd_recipient_limit = 16 smtpd_soft_error_limit = 3 smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit # Requirements for the sender details smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_$ # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.n$ # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_do$ # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes Here is also my /etc/postfix/aliases: # See man 5 aliases for format postmaster: root Here is also my /etc/mailname: nairanode.com I've also updated my hostname to nairanode.com However, when I run postalias /etc/postfix/aliases I get the following : postalias: warning: valid_hostname: invalid character 47(decimal): /etc/mailname postalias: fatal: file /etc/postfix/main.cf: parameter mydomain: bad parameter value: /etc/mailname Is there something I'm doing wrong?! I noticed that when I replace myorigin = /etc/mailname with myorigin = nairanode.com in my postfix config, I don't see any errors anymore after calling postalias. Is this a bug or something?!

  Read the article

• I have been told to accept one error with Memtest86+

  - by DustByte

  Bought a new computer back in August with 4x4 GB RAM. Had problems with the RAM. They sent me four new sticks, which also generated errors. Singled out four sticks (from the eight I now had) that didn't generate any errors. Discovered by coincident a new RAM error last week (this time no BSOD). Contacted the company. According to them there have been issues with a bad stock from last summer so I got two tested 8 GB sticks sent to me. Been running Memtest86+ over the weekend. After 20 hours I got an error (see attached photo). The test has now been running for 37 hours but so far only this one error. I contacted the company where I bought the computer. They wrote back: I wouldn't worry about hat one fail. We have had similar situations here whereby it passes numerous times but then fails once. We think it's an issue with memtest, after all memory is faulty or it isn't so you can't really have it pass a few times, fail the next time around and then pass again! Please trust me on this and continue with the memory we sent you and if your problems continue we'll look at getting it replaced again. I gather from other forum posts that many people do not accept a single error. What could this single error signify, faulty RAM or a glitch in the MEMTEST program (or other)? Update: From the helpful comments below I conclude that an occasional (and rare) "random" error could occur and be acceptable, but repeated errors at the same address would indicate malfunction. Memtest has now run for 45 hours and I still have only one error. For everyone's information, I will keep running the test. In less than two days I am going away for a month. I will most likely leave Memtest running. As I do not have a UPS there is a risk that a power outage will ruin the experiment. The computer is a desktop so I cannot bring it with me (which would curiously have exposed it to more cosmic rays as I will be flying ;)).

  Read the article

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

• Pushing Large Files to 500+ Computers [closed]

  - by WMIF

  I work with a team to manage 500-600 rented Windows 7 computers for an annual conference. We have a large amount of data that needs to be synced to these computers, up to 1 TiB. The computers are divided into rooms and connected through unmanaged gigabit switches. We prepare these computers ahead of time with the Windows installation and configuration, plus any files that we have available to us before we send the base image in for replication by the rental company. Every year, we have presenters approach on site with up to gigs of data that need to be pushed to the room that they will be presenting in. Sometimes they only have a few files that are small sizes, such as a slide PDF, but can sometimes be much larger 5 GiB. Our current strategy for pushing these files is using batch scripts and RoboCopy. For the large pushes, we actually use a BitTorrent client to generate a torrent file, and then we use the batch-RoboCopy to push the torrent into a folder on the remote machines that is being monitored by an installed BT client. Often times, this data needs to be pushed immediately with a small time window. We have several machines in a control room that are identical to the machines on the floor that we use for these pushes. We occasionally have a need to execute a program on the remote machines, and we currently use batch and PSexec to handle this task. We would love to be able to respond to these last minute pushes with "sorry, your own fault", but it won't happen. The BT method has allowed us to have a much faster response time, but the whole batch process can get messy when there are multiple jobs being pushed. We use Enterprise Ghost for other processes, and it doesn't work well in this large of scale, plus it is really quite expensive for a once-a-year task like this. EDIT: There is a hard requirement that the remote machines on the floor are running Windows. The control machines do not have a hard OS requirement. I would really like to stay away from Multicast because of complications with upstream routers. Is Multicast or BitTorrent the better way to go on this? Is there another protocol that might work better?

  Read the article

• Hardware for multipurpose home server

  - by Michael Dmitry Azarkevich

  Hi guys, I'm looking to set up a multipurpose home server and hoped you could help me with the hardware selection. First of all, the services it will provide: Hosting a MySQL database (for training and testing purposes) FTP server Personal Mail Server Home media server So with this in mind I've done some research, and found some viable solutions: A standard PC with the appropriate software (Either second hand or new) A non-solid state mini-ITX system A solid state, fanless mini-ITX system I've also noted the pros and cons of each system: A standard second hand PC with old hardware would be the cheapest option. It could also have lacking processing power, not enough RAM and generally faulty hardware. Also, huge power consumption heat generation and noise levels. A standard new PC would have top-notch hardware and will stay that way for quite some time, so it's a good investment. But again, the main problem is power consumption, heat generation and noise levels. A non-solid state mini-ITX system would have the advantages of lower power consumption, lower cost (as far as I can see) and long lasting hardware. But it will generate noise and heat which will be even worse because of the size. A solid state, fanless mini-ITX system would have all the advantages of a non-solid state mini-ITX but with minimal noise and heat. The main disadvantage is the read\write problems of flash memory. All in all I'm leaning towards a non-solid state mini-ITX because of the read\write issues of flash memory. So, after this overview of what I do know, my questions are: Are all these services even providable from a single server? To my best understanding they are, but then again, I might be wrong. Is any of these solutions viable? If yes, which one is the best for my purposes? If not, what would you suggest? Also, on a more software oriented note: OS wise, I'm planning to run Linux. I'm currently thinking of four options I've been recommended: CentOS, Gentoo, DSL (Damn Small Linux) and LFS (Linux From Scratch). Any thoughts on this? Any other distro you would recomend? Regarding FTP services, I've herd good things about FileZila. Anyone has any experience with that? Do you recommend it? Do you recommend something else? Regarding the Mail service, I know nothing about this except that it exists. Any software you recommend for this task? Home media, same as mail service. Any recommended software? Thank you very much.

  Read the article

• vmdk to live cd - VMware vmxnet virtual NIC driver Kernel panic

  - by ronalchn

  Task I am trying to convert a virtual machine to a live CD. Specifically, the virtual machine I am trying to convert is the IOI 2013 Competition Environment. In this task, I am aided by a guide Converting a virtual disk image: VDI or VMDK to an ISO you can distribute. Symptoms However, after getting through all the instructions, the live CD causes a kernel panic on boot on bare metal. In particular, the screen shows: [0.737348] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.737503] sr 3:0:0:0: >Attached scsi CD-ROM sr0 [0.737638] sr 3:0:0:0: >Attached scsi generic sg2 type 5 [0.737771] Freeing unused kernel memory: 756k freed [0.738093] Write protecting the kernel text: 5960k [0.738155] Write protecting the kernel read-only data: 2424k [0.738224] NX-protecting the kernel data: 4280k Loading, please wait... [0.752252] udevd[100]: starting version 175 [0.768708] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI [0.781204] VMware PVSCSI driver - version 1.0.2.0-k [0.789555] VMware vmxnet virtual NIC driver [0.799356] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200 [0.799356] [0.799472] Pid: 1, comm: init Tainted: G 0 3.5.0-17-generic #28-Ubuntu [0.799549] Call Trace: [0.799603] [<c15bf0ec>] panic+0x81/0x17b [0.799654] [<c104a6a5>] do_exit+0x745/0x7a0 [0.799707] [<c104a9a4>] do_group_exit+0x34/0xa0 [0.799760] [<c104aa28>] sys_exit_group+0x18/0x20 [0.799813] [<c15cff5f>] sysenter_do_call+0x12/0x28 Possible problem I suspect that the problem is the VMware vmxnet virtual NIC driver - however, I do not know how I can uninstall it, and possibly install one for a bare metal machine. If anyone knows which packages needs installing/uninstalling at the .rootfs/ chroot directory stage, please let me know. Details on procedure Do note that after importing the .ova file into Virtualbox, the virtual machine is stored as a .vmdk file already, and not a .vdi file. I would like to point out some results of the procedure followed in case of any questions. This is after extracting the filesystem from the .raw file to the .rootfs/ directory mentioned in the blog. I changed the filesystem table as mentioned in the blog, then looked at the possible "kernel optimized for virtualization". However, I found that linux-image-generic was already installed. Also, when running the command dpkg-query --showformat='${Package}\n' -W 'vmware-tools*' (or dpkg-query --showformat='${Package}\n' -W '*-virtual'), no packages were found. Thus, I did not find any virtualization specific packages. I proceeded to generate the iso following the steps in the blog, and burned it to a DVD.

  Read the article

• Galaxy Tab 3 producing continuous LightSensor error in LogCat

  - by Richard Tingle

  I am using a Galaxy Tab 3 as a test device for writing an android app. As such I'm interested in the output of the LogCat which is being filled with these error level messages. The device itself appears to work correctly, apps which rely on the light sensor correctly respond to it and the number in the error itself goes down if the light sensor is obscured. If I wasn't using it to develop apps I wouldn't even be aware of the issue but I believe it is an issue with the device itself not my app: simply plugging the tab 3 into the computer and using Eclipse - ADT to look at the LogCat without any app running leads to these errors being shown. I know I could filter the LogCat to ignore these errors but inconvenience aside; they concern me. A sample of the log cat is below (it generates errors continuously). This is on verbose so it includes some debug level (D/) messages as well as the error level messages (E/). How can I correct the device to no longer generate these errors. 06-11 10:08:45.789: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:45.992: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:46.195: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:46.398: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:46.601: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:46.804: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.007: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.210: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.414: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.617: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.820: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:48.023: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:48.039: D/dalvikvm(15201): GC_CONCURRENT freed 1947K, 17% free 16973K/20359K, paused 13ms+13ms, total 50ms 06-11 10:08:48.226: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:48.429: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 13 06-11 10:08:48.632: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 13 06-11 10:08:48.632: D/STATUSBAR-NetworkController(472): refreshSignalCluster: data=0 bt=false 06-11 10:08:48.835: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:49.039: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:49.242: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:49.445: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 13 06-11 10:08:49.632: D/STATUSBAR-NetworkController(472): refreshSignalCluster: data=0 bt=false 06-11 10:08:49.648: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:49.851: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 13

  Read the article

• Wrapping a point-to-point link

  - by user3712955

  I'm using a pair of IP radios (non-WiFi) to bridge my office engineering LAN (172.0.0.0/8) to a lab in another building. The radios work fine, but they expose a web management interface I'd like to hide, and they also generate traffic (ARP, STP, and more) that I need to keep off my (very, very clean) LAN segments. I have some ARM-Linux boards (similar to Beagle/Panda/RasPi) running Ubuntu, and I've put one at each end of the link, between the radio and the LAN. Each of the boards has 2 wired Ethernet interfaces, eth0 and eth1. The LAN segments are connected to eth0, and the radios are connected to eth1. I'd like to accomplish the following: Keep radio-originated traffic off my LAN segments! Hide all services provided by the radio (web, ssh, etc.) Transparently pass all traffic between the LAN segments (including things like ARP). The above also applies to the ARM-Linux boards: No stray traffic my LAN from them either! I'd like the system to look like a switch: LAN packets arriving at one eth0 appear at the other. And neither eth0 should have an IP address: The working system should behave like a CAT6 cable with some latency (instead of ARM boards and radios). Unfortunately, I'm confused about how to properly configure the ARM Ubuntu systems. What I'm guessing I need is a bridge on each board (br0?) and a VLAN (vlan0 or eth0.0?) to isolate the LAN traffic from everything else as it passes through the ARM boards and the radios. Then I need some kind of a firewall to block sending anything out eth0 that isn't from the other eth0 (via the VLAN). I've looked at the ip and ebtables commands (especially -t broute). While the concepts sorta-kinda make sense, I'm completely lost in the details. Edit: In the perverse case that a system on one of my LAN segments has the same IP address as one of the radios, or as eth1 on the ARM-Ubuntu boards, a VLAN won't work. Which I believe means I need to tunnel all traffic between the two eth0 interfaces to get that "like a wire" behavior. Help? Finally, I'd like to have a way to temporarily expose services on the ARM boards (ssh) and the radios (web) for maintenance purposes. Ideally, it would expose an IP address with ssh available on port 22. Once connected, I figure I'd start an X11 session and run a browser on the ARM board to access the radios. Or something. I could login via the console to enable/disable this, or perhaps could use a GPIO to trigger a script. I feel I've identified most of the pieces needed to make all this happen, but I have no idea how to combine them to make a working system. Thanks!

  Read the article

• HttpWebRequest and Ignoring SSL Certificate Errors

  - by Rick Strahl

  Man I can't believe this. I'm still mucking around with OFX servers and it drives me absolutely crazy how some these servers are just so unbelievably misconfigured. I've recently hit three different 3 major brokerages which fail HTTP validation with bad or corrupt certificates at least according to the .NET WebRequest class. What's somewhat odd here though is that WinInet seems to find no issue with these servers - it's only .NET's Http client that's ultra finicky. So the question then becomes how do you tell HttpWebRequest to ignore certificate errors? In WinInet there used to be a host of flags to do this, but it's not quite so easy with WebRequest. Basically you need to configure the CertificatePolicy on the ServicePointManager by creating a custom policy. Not exactly trivial. Here's the code to hook it up: public bool CreateWebRequestObject(string Url) {    try     {        this.WebRequest =  (HttpWebRequest) System.Net.WebRequest.Create(Url);         if (this.IgnoreCertificateErrors)            ServicePointManager.CertificatePolicy = delegate { return true; };}One thing to watch out for is that this an application global setting. There's one global ServicePointManager and once you set this value any subsequent requests will inherit this policy as well, which may or may not be what you want. So it's probably a good idea to set the policy when the app starts and leave it be - otherwise you may run into odd behavior in some situations especially in multi-thread situations.Another way to deal with this is in you application .config file. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <configuration>   <system.net>     <settings>       <servicePointManager           checkCertificateName="false"           checkCertificateRevocationList="false"                />     </settings>   </system.net> </configuration> This seems to work most of the time, although I've seen some situations where it doesn't, but where the code implementation works which is frustrating. The .config settings aren't as inclusive as the programmatic code that can ignore any and all cert errors - shrug. Anyway, the code approach got me past the stopper issue. It still amazes me that theses OFX servers even require this. After all this is financial data we're talking about here. The last thing I want to do is disable extra checks on the certificates. Well I guess I shouldn't be surprised - these are the same companies that apparently don't believe in XML enough to generate valid XML (or even valid SGML for that matter)...© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET  CSharp  HTTP  

  Read the article

• ERROR: Linux route add command failed: external program exited with error status: 4

  - by JohnMerlino

  A remote machine running fedora uses openvpn, and multiple developers were successfully able to connect to it via their client openvpn. However, I am running Ubuntu 12.04 and I am having trouble connecting to the server via vpn. I copied ca.crt, home.key, and home.crt from the server to my local machine to /etc/openvpn folder. My client.conf file looks like this: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote xx.xxx.xx.130 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nogroup # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca ca.crt cert home.crt key home.key # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 But when I start server and look in /var/log/syslog, I notice the following error: May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 10.27.12.1 netmask 255.255.255.252 gw 10.27.12.37 May 27 22:13:51 myuser ovpn-client[5626]: ERROR: Linux route add command failed: external program exited with error status: 4 May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 172.27.12.0 netmask 255.255.255.0 gw 10.27.12.37 May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 10.27.12.1 netmask 255.255.255.255 gw 10.27.12.37 And I am unable to connect to the server via openvpn: $ ssh [email protected] ssh: connect to host xxx.xx.xx.130 port 22: No route to host What may I be doing wrong?

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >