Search Results

Search found 9641 results on 386 pages for 'drupal menu'.

Page 279/386 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

• Raid 5 scsi fault

  - by HaLaBi

  I have no much knowledge about servers and I was looking all day around the internet about finding a solution to my raid 5 problem. All of a sudden two disks failed. The server won't boot (HP Proliant, windows 2003 R2, very old maybe 10 years old). I know that if one disk is faulty then I can add a new disk and rebuild it and things will be fine, the problem is two went faulty :( is this normal? two at the same time? is there any other thing I can do and I am not aware of? other than taking them out and reinserting them back? Windows won't boot. The Array menu shows that disks 0 and 4 are "Missing". Any other tricks or things to do? It is important because for some unknown reason the back up job did not work for a month and I just found out, so I need to make these raid 5 back online again.

  Read the article

• (Windows 7) Dial Up Connection Locks up the Networking Service

  - by Nick

  I connect to the internet by using my cell phone as a dial up modem. (shh, don't tell my service provider) The connection is usually seamless and the speed is good (150kbps) but occasionally, the connection will get terminated by either the phone or the network, I'm not sure which and then Windows7 stubbornly doesn't acknowledge that the connection is dead so I can re-dial. I have tried to manually kill the connection, but then anything related to the network service refuses to open and the connection is still there. No "Network and Sharing Center", "Network Devices" and often the tray menu will refuse to pop open. The only way I have found to clear the problem is a full restart which. Logging off doesn't work and I haven't been able to find the service that is frozen. If anyone knows how to fix this or prevent this from happening or even how to go about troubleshooting I would be very grateful. ps. This problem is non-existant when tethering in linux on the same machine. (Ubunutu 9 and JoliOS)

  Read the article

• Lost Linux root password - Recovery mode and init=/bin/bash fail

  - by Albeit

  I lost/forgot the root password to a server sitting beside me and am trying to reset it. I would rather not have to wipe and re-install or use a Live CD (server is running Ubuntu Server 12.04). What I've tried so far... 1) Boot into "Recovery mode" from Grub2 boot menu then drop into root shell prompt. I am prompted to "Give root password for maintenance". No-go. 2) Change the boot parameters for the main boot option to include "rw" and "init=/bin/bash". When I then boot with Ctrl-X, the screen goes black, and nothing happens (I've waited five minutes). init=/bin/sh and init=/bin/static-sh both do the same thing, while init=/sbin/init boots as normal. Is there anything else I can try to reset the root password? Thank you!

  Read the article

• emacs starting maximised

  - by Seamus

  I want a keyboard shortcut to open emacs in a maximised window. I tried emacs --fullscreen, but that is full screen rather than maximised window... That is, the emacs window covers ubuntu menu bars. emacs -fw gets a full width window and emacs -fh gets a full height window, but if you put both options, it only reads the second one. At the moment, I just have another keyboard shortcut for maximising a window. Is there a way to get emacs to start maximised? Ubuntu 9.10, emacs 22, if that makes a difference.

  Read the article

• How to add entries to combobox in Word XP

  - by Kris C

  I'm trying to follow the following instructions to add a combobox to a form and add some values to it for the user to pick: http://office.microsoft.com/en-gb/help/create-forms-that-users-complete-in-word-HP005230270.aspx I've created a .dot and then dragged a combobox onto the document. When I double-click on it though, it opens up the VBA editor. Do I have to add the items programatically as per the following question How do I add a combobox in Word? or is it possible to do this using the UI? The other question/answer refers to creating a form. Is there a step I've missed between creating a .dot to then create a form somehow before adding form elements to it? Right clicking gives the following menu options: Cut Copy Paste properties View code Combo Box Object - Edit or Convert Format Control Hyperlink Choosing edit allows me to type some text onto the visible part of the control, but doesn't allow me to add multiple options Right-clicking and selecting properties opens the following:

  Read the article

• How can I fix a computer that is literally too slow to do anything?

  - by fredley

  I'm troubleshooting a Windows 7 PC for a friend. A couple of days ago it started running 'slow'. It turns out 'slow' is about 15 minutes to the first glimpse of the desktop, and another 30 to show icons. It is possible to open Task Manager, and nothing seems awry, CPU usage at 1-5%, plenty of memory free. The machine is clearly infested with malware though, in particular a program called 'Optimizer Pro' is demanding money to 'remove 5102 files slowing down my computer'. This seems highly suspicious. My problem is though, that I can't access msconfig (I left it for a couple of hours after having hopefully typed it into the Start Menu and hit enter - nothing seems to have loaded), or anything at all basically. I can boot from a Linux Live CD, but can I actually do anything useful from there? System Restore hasn't fixed it either, and Safe Mode exhibits the same behavior.

  Read the article

• changing desktop background picture from stretch on Windows 7

  - by nird

  I have a brand new Windows 7 laptop, I've changed the desktop background picture using the "personalization" item of the desktop right click menu. Below the list that of images to choose there's a drop down with options "stretch", "fit", "tile", etc. When I change that from stretch to anything else nothing happens, and when I return to that dialog the drop down is still on "stretch". Anyone knows what's going on? Thanks. EDIT: apparently this is a know problem with HP/Compaq laptops.

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by vette982

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• Bootcamp: setup of Windows 7 (64 bit) hanging at "disk.sys"

  - by Skade

  I am having trouble getting Windows 7 Professional (64bit) to install on a Macbook Pro (late 2010 model). The installer hangs when loading the setup from disk. When restarting, I get an option to boot Windows from disk. The installer then starts loading files from disk and suddenly hangs. Using "Safe Mode" (from the advanced menu), it tells me that the installer hangs when loading "disk.sys". The installation is made on a fresh Bootcamp partition, the disk uses GPT. Has anyone seen this before and maybe found a solution?

  Read the article

• Cannot delete folder - Content seems to be nested recursively

  - by RikuXan

  I cannot delete a folder located on my hard disk by any means. I don't quite know how it was created, all I know is, that it is a pretty deep structure of folders (too deep to delete it at once, since Windows restriction path name too long), but the problem in the end is, that I can't "pull out" the inner folders, because they don't seem to be folders anymore (Context menu lacks things like "Properties", "Cut", "Copy", "Delete" etc.) Here a picture of how a right click looks like on one of these "folders": As you can see, the current folder is in very deep, but that is not the problem, rather the one I left-clicked on. Has anyone any advice on how to get rid of these? I tried a chkdsk, said no errors. I also tried deleting those folder via a VMWare Ubuntu, to no success. I also tried a batch file from a volunteer at MS boards, that should automatically de-nest such folders, but I guess mine is a special case, since the tool only created more such folders.

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by user41926

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• Move and clone VirtualBox machines with filesystem commands

  - by mit

  I know of 2 ways to clone a VirtualBox machine on a linux host, one is by using the VirtualBox gui and exporting and re-importing as Appliance (in the file menu of VirtualBox). The other is by cloning only the virtual disk containers: VBoxManage clonevdi source.vdi target.vdi (Taken from http://forums.virtualbox.org/viewtopic.php?p=853#p858 ) I would have to create a new VM afterwards and use the cloned virtual disk. Is there a way I can just copy a virtual disk and the and do the rest by hand? I'd have to manually edit the ~/VirtualBox/VirtualBox.xml and insert a new disk and a new machine: Can I just make up UUIDs or how would this work? I would very much prefer this hardcore method of doing things as it allows me to freely and rapdily backup, restore, move or clone machines. Or ist there a better way to do this?

  Read the article

• Shares not working on boot need to reinstall "File and Printer Sharing for Microsoft Networks" on server every morning to fix

  - by Neaox

  I had a problem a few days ago see question here: Can no longer access computer or network shares to my server from any other computers on the network The fix that I found does in fact work however when I boot my PC in the morning the shares are no longer working, to fix this I need to remote desktop into the server and re-install "File and Printer Sharing for Microsoft Networks" on the main adaptor. Doing this makes the shares work again, however it is anoying to have to do this each and every morning. On top of this my offline files are no longer available offline: I store my user profile on the server and had them selected to be "Always Available" however since this has happened they are no longer available offline and the option to make them available offline from the context menu is no longer available. Another problem, and I don't know if this is the cause or just a tell of a deeper issue but this server runs hyper-v, since these problems I can no longer remote desktop into the hyper-v client. Thanks for any help anyone can give.

  Read the article

• Chrome browser rendering unpredictable mobile layout

  - by steve

  I am having a very hard time debugging this issue, I may as well find out if others have seen anything similar. I am finding that Webkit browsers are rendering extra space in a stacked menu I'm using for the mobile layout on a site I'm developing. The best way to describe this is with the following images: You can see that the is selected and shown with the padding. There is no margin, and yet there is some space between the top of the padding and the bottom border of the sibling. Here is how it is supposed to look in Firefox: I am interested to see if the community knows what in the world is going on! As I move through the inspector, I am not able to highlight the offending area, making this very hard to diagnose, as I've said.

  Read the article

• Mix content warning on ASPX page

  - by Amit

  Hi, We have started receiving the mixed content warning on ASPX pages on our secured site. We do not have any mix content, we load all our JS, Images, CSS and ASPX files using HTTPS. I dont know why we have started receiving these warnings now. The latest thing which we have added is the third party control for Dialog boxes from Essential Object. We are previously using their Menu control but added dialog box recently. Also we have made our application browser compatible. I feel the reason is something between these two points. Can anyone suggest any solution or any workaround if they know any or have used Essential Object controls and faced simililar issue? Essential object is saying it is not their problem. The mix content warning appears any time and not specifically when the Essential Control dialog box popsup, thats why I am bit confused. Any help is highly appriciated. Thanks.

  Read the article

• Powershell window preventing shutdown

  - by FrinkTheBrave

  If I have a PowerShell window (at the PS command prompt) on display it prevents the computer shutting down. i.e. if I open a powershell window and then try to shutdown the server, I get the End Program popup saying Windows cannot end this program I get the same result if I start the powershell from the start menu, from a cmd prompt and from a shortcut with -NoExit specified. Any ideas how I can get shutdown to automatically close a powershell window (if it is at the PS prompt) in the same way as it would for a CMD window? Alternatively, is it possible for PowerShell to detect when a shutdown has been initiated and therefore close itself?

  Read the article

• WSS 3.0 fails to hide quick launch items for which the current user does not have access

  - by Nils

  I'm running a Small Business Server 2008 with Windows Sharepoint Services 3.0 (WSS 3.0). I thought WSS was supposed to hide menu items for which the current logged in user don't have access? Apparently, all users can see all links, regardless of whether they have access. This applies to both links to newly created sub-sites as well as document libraries/lists. Is this expected behaviour, or is there a misconfiguration somewhere that causes the links to stay visible even for users without access? Thanks!

  Read the article

• Can I run Ubuntu directly under Windows 8?

  - by huahsin68

  Text below is extract from the article, Windows 8 Tip: Virtualize with Hyper-V. Better still, Windows Virtual PC offered a feature called XP Mode, free for users of Windows 7 Professional, Enterprise, and Ultimate, which included a full working copy of Windows XP with Service Pack 3. But the big deal here is that as you installed applications in the virtual copy of XP, they would be made available through Windows 7’s Start Menu. And you could run these applications, side-by-side, with Windows 7 applications on the Windows 7 desktop. It was a seamless, integrated experience, ideal for those one-off application compatibility issues. I was thinking to install VirtualBox in Windows 8 and then run Ubuntu as guess OS. Since Hyper-V is a Type-0 hipervisor, may I know does this bring the same benefit if I have Ubuntu Linux install as a virtual guess OS? Meaning, if I turning the Ubuntu on (the guess OS), does the Ubuntu still able to access the hardware information like nVidia display card or processor information? I'm just curious to know can this be done?

  Read the article

• Failing Seagate HDD - Not Recognised

  - by thefragileomen

  I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

  Read the article

• How can I change font and color of the captions under the icons on the desktop?

  - by greenber

  I am trying to use a different font and color for the captions on the icons on the desktop. Under Personalize I have been able to change the icon spacing (both horizontal and vertical) and the size of the text. But I cannot change the font nor the color of the displayed text. The font claims to have changed but it doesn't and the color pulldown menu is disabled. I use the non-Aero Windows 7 Basic but I am not able to change the font or the color.

  Read the article

• What is the mount point for Windows share on Ubuntu 9.10?

  - by AMS949

  I am new to Ubuntu so please be gentle! I am taking the plunge from Windows!! I connected to a Windows share (using Connect to Server... menu) and I can access it on Gnome just fine. However, I don't know how I can access it in console, or in any other program that requires the path, when it's already connected on Gnome. What's the mount point for that? I tried the mount command but it does not show up.

  Read the article

• Why can't I right click on flash videos in Chrome? (Ubuntu 9.10)

  - by user242065

  I'm trying to change the "quality" to low of a Hulu video so I can full screen it with out it being choppy but right click does nothing. When I right click in firefox it brings up a menu. I'm running Chrome on Ubuntu 9.10, is any one else having this issue I tried Google and got nothing back. I use chrome as my main browser, I have to switch to firefox every time I watch Hulu videos. Is there another way I cant change the quality of the flash video in Chrome?

  Read the article

• How to ALWAYS link an image in MS Word 2010 instead of embedding it?

  - by grunwald2.0

  I want to only link, not embed, pictures in my Word document. Yet I got a lot of images to insert! And I want to spare me the additional click into the dropdown menu one and for all, so the question is, is there any way to set "link image(s)" as default? Because I didn't find anything in the Word settings, only totally useless detail settings. This "detail" has been overseen by Microsoft it seems! :( I would provide you with a screenshot, but it would be German anyways. I think the guys who use image linking in Word since v2007, will know what I mean. Thank you in advance! Best regards

  Read the article

• Windows Recovery partition unusable after Ubuntu 12.04 install on Eee PC 1005P

  - by Crivat Camilar

  Installed Ubuntu 12.04 over the secondary (D:) partition with Grub2 handling multi-boot. Never accessed the 'Recovery' option in the boot menu until Windows7 Starter became unusable due to HDD failure (bad sectors on C:). Tried creating an USB recovery stick using the OEM's recovery application (F9) on hidden partition: all I got was a clean C:\ and an error telling me the recovery images cannot be found [R:\recovery\windowsre\ - or something very much like that] although everything is there (changed 'hidden' flag to check and copy contents). Nothing happens upon pressing F9, then Grub takes over giving the recovery option. The application starts but halts about 30s after initializing, very briefly displaying the error message above. I guess every time it goes through this it actually wipes C:\ but crashes immediately afterwards not being able to find what-ever .wim image files it needs. How to make it work?

  Read the article

• Wireshark Display Filter protocol==TLSV1? (and PacketLength)

  - by NealWalters

  What would the filter expression be to just select the protocols where the protocol = TLSV1? Something obvious like protocol == "TLSV1" or TCP.protocol == "TLSV1" is apparently not the right way. ip.proto == "TLSV1" says "ip.proto cannot accept strings as values" Update - additional tips: Another great but hidden search is on PacketLength: You can add packet length to your display by clicking "Edit Preferences" (menu or icon), and adding the PacketLength as a new column, but to filter on it you have to use the more cryptic: frame.len == ### where ### is your desired number. We were using this to determine how many packets had been sent and/or received, when you filter, the status-bar at the bottom of the screen shows the number of items matching the filter.

  Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >