Search Results

Search found 8274 results on 331 pages for 'offtopic but important'.

Page 279/331 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

• What is a good layout for a somewhat advanced home network and storage solution?

  - by Shaun

  My home network/storage needs are changing and I am searching for some opinions and starting points on what a good network/storage layout would be that can serve my needs for a few years into the future. I think I have a decent starting point for equipment, but I am also willing to invest fairly heavily in a solution that can last me for a while. I am a bit of a tech nerd and I have a moderate tolerance for setup of the solution. I would prefer if maintenance of the system is somewhat low once it is setup, but I am willing to accept some tradeoffs. Existing equipment: Router - Netgear WNDR3700 (gigabit) Router - DLink Gamerlounge DGL-4300 (gigabit) Switch - 16 port Trendnet green switch (gigabit) Switch - 5 port Trendnet green (gigabit) Computer - i7-950 office computer (gigabit ethernet) Computer - Q6600 quad core media center, hooked up to TV, records shows (gigabit ethernet) Computer - Acer 1810T ultraportable laptop (gigabit and N ethernet) NAS - Intel SS4200-E (gigabit) External hard drive - 2TB WD Green drive (esata) All kinds of miscellaneous network connected TV, Bluray, Verizon network extender, HDhomerun TV tuners, etc. Requirements: -Robust backup solution for a growing collection of huge family picture files and personal files, around 1.5TB. (Including offsite backup) -Central location for all user's files, while also keeping them secure from each other. -Storage for terabytes of movie backups and recorded TV, and access to them from all computers (maybe around 4TB eventually) -Possibility to host files to friends and family easily Nice to have: -Backup of terabytes of movie backups Intriguing possibilities: -Capability to have users' Windows desktops and files look the same from all network computers I am not sure if the new Windows Home Server 2011 would fit into this well, if I need a domain server, how best to organize my backups, or how to most effectively use RAID. Currently I am simply backing up all computers to a RAID 1 on the NAS box, which I was thinking could prevent a situation where I reach for a backup and find that the disk is corrupt. One possibility that I am thinking about now is simply using my media center PC with a huge RAID of hard drives on which all files are stored. Pseudo-backup of all files would be present because of the RAID, but important files would also be backed up off site via carrying hard drives to work. But what if corruption seeps into the files and the corrupted data is then backed up? Does RAID protect against this? I really want to take next to zero risks with the irreplaceable files. I can handle some degree of risk with the movies and other files. I'm looking for critiques on this idea as well as other possibilities. To summarize, my goal is high functionality, media capable, and robust backup of irreplaceable files.

  Read the article

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• script to recursively check for and select dependencies

  - by rp.sullivan

  I have written a script that does this but it is one of my first scripts ever so i am sure there is a better way:) Let me know how you would go about doing this. I'm looking for a simple yet efficient way to do this. Here is some important background info: ( It might be a little confusing but hopefully by the end it will make sense. ) 1) This image shows the structure/location of the relevant dirs and files. 2) The packages.file located at ./config/default/config/packages is a space delimited file. field5 is the "package name" which i will call $a for explanations sake. field4 is the name of the dir containing the $a.dir i will call $b field1 shows if the package is selected or not, "X"(capital x) for selected and "O"(capital o as in orange) for not selected. Here is an example of what the packages.file might contain: ... X ---3------ 104.800 database gdbm 1.8.3 / base/library CROSS 0 O -1---5---- 105.000 base libiconv 1.13.1 / base/tool CROSS 0 X 01---5---- 105.000 base pkgconfig 0.25 / base/tool CROSS 0 X -1-3------ 105.000 base texinfo 4.13a / base/tool CROSS DIETLIBC 0 O -----5---- 105.000 develop duma 2_5_15 / base/development CROSS NOPARALLEL 0 O -----5---- 105.000 develop electricfence 2_4_13 / base/development CROSS 0 O -----5---- 105.000 develop gnupth 2.0.7 / extra/development CROSS NOPARALLEL FPIC-QUIRK 0 ... 3) For almost every package listed in the "packages.file" there is a corresponding ".cache file" The .cache file for package $a would be located at ./package/$b/$a/$a.cache The .cache files contain a list of dependencies for that particular package. Here is an example of one of the .cache files might look like. Note that the dependencies are field2 of lines containing "[DEP]" These dependencies are all names of packages in the "package.file" [TIMESTAMP] 1134178701 Sat Dec 10 02:38:21 2005 [BUILDTIME] 295 (9) [SIZE] 11.64 MB, 191 files [DEP] 00-dirtree [DEP] bash [DEP] binutils [DEP] bzip2 [DEP] cf [DEP] coreutils ... So with all that in mind... I'm looking for a shell script that: From within the "main dir" Looks at the ./config/default/config/packages file and finds the "selected" packages and reads the corresponding .cache Then compiles a list of dependencies that excludes the already selected packages Then selects the dependencies (by changing field1 to X) in the ./config/default/config/packages file and repeats until all the dependencies are met Note: The script will ultimately end up in the "scripts dir" and be called from the "main dir". If this is not clear let me know what need clarification. For those interested I'm playing around with T2 SDE. If you are into playing around with linux it might be worth taking a look.

  Read the article

• How to improve this bash shell script for turning hardlinks into symlinks?

  - by MountainX

  This shell script is mostly the work of other people. It has gone through several iterations, and I have tweaked it slightly while also trying to fully understand how it works. I think I understand it now, but I don't have confidence to significantly alter it on my own and risk losing data when I run the altered version. So I would appreciate some expert guidance on how to improve this script. The changes I am seeking are: make it even more robust to any strange file names, if possible. It currently handles spaces in file names, but not newlines. I can live with that (because I try to find any file names with newlines and get rid of them). make it more intelligent about which file gets retained as the actual inode content and which file(s) become sym links. I would like to be able to choose to retain the file that is either a) the shortest path, b) the longest path or c) has the filename with the most alpha characters (which will probably be the most descriptive name). allow it to read the directories to process either from parameters passed in or from a file. optionally, write a long of all changes and/or all files not processed. Of all of these, #2 is the most important for me right now. I need to process some files with it and I need to improve the way it chooses which files to turn into symlinks. (I tried using things like the find option -depth without success.) Here's the current script: #!/bin/bash # clean up known problematic files first. ## find /home -type f -wholename '*Icon* ## *' -exec rm '{}' \; # Configure script environment # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ set -o nounset dir='/SOME/PATH/HERE/' # For each path which has multiple links # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # (except ones containing newline) last_inode= while IFS= read -r path_info do #echo "DEBUG: path_info: '$path_info'" inode=${path_info%%:*} path=${path_info#*:} if [[ $last_inode != $inode ]]; then last_inode=$inode path_to_keep=$path else printf "ln -s\t'$path_to_keep'\t'$path'\n" rm "$path" ln -s "$path_to_keep" "$path" fi done < <( find "$dir" -type f -links +1 ! -wholename '* *' -printf '%i:%p\n' | sort --field-separator=: ) # Warn about any excluded files # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buf=$( find "$dir" -type f -links +1 -path '* *' ) if [[ $buf != '' ]]; then echo 'Some files not processed because their paths contained newline(s):'$'\n'"$buf" fi exit 0

  Read the article

• Communication software wanted: email, sms, IM, phone calls [closed]

  - by user63835

  I am searching for a software solution that integrates / unifies my communication. I use email, instant messaging, SMS and phone. I would like to get all emails, SMS, instant messaging dialogs and meta-data about phone calls into one application. Important is that I can access all past communication with one application. There should be a global address-book to map the communication data to persons or organizations. I want all the communication data in one place to access and backup it easily. The software solution is not required to be multi-user application or server application. It is just for one user (me) only, but server or multi-user applications are not excluded. I may run it on a server hardware. It should run on Linux (Lubuntu / Ubuntu prefered). Free and OpenSource software is prefered. It would be nice if I could perform new communication (like writing a new email, sms, etc.) with one application, but that is not a must have requirement. I could also work with different applications dedicated for different types of communication like IM-application for IM and email-application for email, if all that communication data from the specialized applications will be delivered to one single place where I can access and backup it. I have an android phone and currently I am using Google contacts as the address-book. In the long term this may change, to get back the control over my data. I did some Internet search but did not find a nice solution, yet. If I am looking for unified messaging and unified communication, am I on the right track? The current Thunderbird version has IM functionality integrated. Did not try it, yet. For SMS it may be possible to use an app to send every SMS (incoming and outgoing) as an email, but I am not sure if those SMS-emails can be mapped to an address-book contact. I don't remember exactly, but isn't there a Google android app (I think Google voice) integrating SMS into google services? But in Germany this function has not been released, yet. Maybe a groupware solution would solve the requirements, but I don't have much experience with it. As communication possibilites are groing, I am woundering that there seems to be such a big gap of solutions. I can't believe I am the only one who would like solution, better integrating all the communication channels more easily. If you know a software solution that solves these requirements (partly) I would be glad if you tell me about it. Thanks in advance.

  Read the article

• Passive FTP on Windows Server 2008 R2 using the IIS7 FTP-Server

  - by ntor

  Hello serverFault-community! During the last few days I have been setting up a Windows Server 2008 R2 in a VMware. I installed the standard FTP-Server on it by using the Webserver (IIS)-role. Everything works fine with accessing my FTP-Site with ftp://localhost in Firefox. I can also get access to it via the local IP of my Server. Actually everything works fine in my LAN. But here's my problem: I want to get access "from outside", using the external IP or a dyndns-URL. I have a LinkSys-Router in front of my Server, therefore I'm forwarding all the important ports. If you may now think "this idiot has probably forgotten some ports", I must dissappoint you. It even works getting access to my Server-Website and messing around in some WebInterfaces. The problem is my passive FTP (active works for me). I always get a timeout, when e.g. FileZilla waits for a response to the LIST-command. The one big thing I don't get, is, why my Server sends a response to the PASV-command, naming a port like 40918, even if I have restricted the data port range for my passive FTP ( in the IIS-Manager) to e.g. [5000-5009]. I simply don't want to open and forward all possible data ports! And another thing is, I can't specify a static external IP-adress for my server, since I don't own any. I hope I have explained my problem in a comprehensible way. If not, simply ask by posting a comment! LG ntor PS: I have already mainly tried following articles: Out Of Band FTP 7 shows "Operation timed out" How to Configure Windows Firewall for a Passive Mode FTP Server ServerFault --- Passive ftp on Server 2008 --- EDIT: --- There is one idea rising up in my mind: When I use FileZilla to connect by passive mode I always get something like this: 227 Entering Passive Mode (192,168,1,102,160,86) According to a Rhinosof-article FZ tries to connect on port "160*256+86 = 41046", although I have restricted the data ports (as mentioned above). Could this be caused by the router, that doesn't forward out-ports directly, but uses different ones? (-- The IP-Adress given is the local one, since I'm not able to define a static external in the IIS-Mgr)

  Read the article

• Can you set up a gaming LAN using OpenVPN installed in a VMware guest OS and be playing the game on the host OS?

  - by Coder

  I would like to setup a gaming VPN. Ie. I have some games that work over LAN and would like to play them with people that are not on my LAN. I know I can do this with OpenVPN. My ultimate goal would be to run OpenVPN portably on my host OS and not even need any virtualization. As such i don't want to install it on my host, but i'm fine with running it portably. I'm even fine with temporarily adding registry keys, and then running a .reg file to remove these entries once i'm done. To this effect i have installed OpenVPN on a virtual machine and diffed the registry. I then manually (using a .reg file) added all the keys that seem important on my host OS and copied the installation folder of OpenVPN onto my host machine. Then i try to run openVPN GUI 1.0.3 as a test and it says "Error opening registy for reading (HKLM\SOFTWARE\OpenVPN). OpenVPN is probably not installed". I verified that that key is indeed in the registry with all subkeys and it looks correct. I have tried running the GUI as an administrator and in compatibility mode with no success. I am running Windows 7. If this fails then i would be happy with installing OpenVPN on a virtual machine in VMWare but they key is that i will be running the game installed on my host machine. The first question for this option is if this is even possible. The second is, that I can't get the VM to have internet access if I use bridging but i can if i use NAT. Is it possible to do this game VPN setup with VMWare guest OS running using NAT? Summary of questions: -Is it possible to run openVPN portably and if so what did i miss above? -If it's not possible to run it portably, then can setup a gaming LAN by installing OpenVPN in a guest OS with NAT and how can i do this? -If the above is not possible then can i install OpenVPN in a guest using bridging and if so how can i set this up with a Windows 7 host and Windows XP guest as currently i can't get the guest to be able to access the internet in bridging mode, but it working in NAT mode. -In general is there any good documentation on setting up a gaming LAN with OpenVPN (i am using 2.1.4) as i have never set up a VPN of any sort before so any help would be much appreciated. Thanks!

  Read the article

• external hard drive is no longer recognized, gives buffer I/O errors

  - by BioGeek

  Hi all, The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive. When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message. [19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21 [19712.145347] usb 2-2: configuration #1 chosen from 1 choice [19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices [19712.147514] usb-storage: device found at 21 [19712.147519] usb-storage: waiting for device to settle before scanning [19717.148978] usb-storage: device scan complete [19717.149527] scsi 25:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [19717.151020] sd 25:0:0:0: Attached scsi generic sg2 type 0 [19717.151685] sd 25:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [19717.160402] sd 25:0:0:0: [sdb] Write Protect is off [19717.160412] sd 25:0:0:0: [sdb] Mode Sense: 34 00 00 00 [19717.160418] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165685] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165691] sdb: sdb1 [19719.171808] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19719.171818] sd 25:0:0:0: [sdb] Attached SCSI disk [19737.430998] sd 25:0:0:0: [sdb] Unhandled sense code [19737.431007] sd 25:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [19737.431016] sd 25:0:0:0: [sdb] Sense Key : Medium Error [current] [19737.431027] sd 25:0:0:0: [sdb] Add. Sense: Unrecovered read error [19737.431038] end_request: I/O error, dev sdb, sector 6160463 [19737.431050] Buffer I/O error on device sdb1, logical block 6160400 [19737.431060] Buffer I/O error on device sdb1, logical block 6160401 [19737.431067] Buffer I/O error on device sdb1, logical block 6160402 [19737.431075] Buffer I/O error on device sdb1, logical block 6160403 [19737.431082] Buffer I/O error on device sdb1, logical block 6160404 [19737.431088] Buffer I/O error on device sdb1, logical block 6160405 [19737.431096] Buffer I/O error on device sdb1, logical block 6160406 [19737.431102] Buffer I/O error on device sdb1, logical block 6160407 [19737.431114] Buffer I/O error on device sdb1, logical block 6160408 [19737.431121] Buffer I/O error on device sdb1, logical block 6160409 [19737.712183] sd 6:0:0:0: [sdb] Unhandled sense code [19737.712191] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [19737.712200] sd 6:0:0:0: [sdb] Sense Key : Hardware Error [current] [19737.712210] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information [19737.712222] end_request: I/O error, dev sdb, sector 0 [19737.712232] Buffer I/O error on device sdb, logical block 0 Neither does the external drive show when I use fdisk: jeroen@phalacrocorax:~$ sudo fdisk -l [sudo] password for jeroen: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000341ad Device Boot Start End Blocks Id System /dev/sda1 * 1 18714 150320173+ 83 Linux /dev/sda2 18715 19457 5968147+ 5 Extended /dev/sda5 18715 19457 5968116 82 Linux swap / Solaris` I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external harddisk. Do I have any other options?

  Read the article

• Cannot access a very specific site from my router

  - by DJDarkViper

  This is a problem for me because this site is important to me. It's MY website. And sadly my email is hosted on my site (which I cant access either) When I try to access my website when connected to my Linksys E3000 router, these days it simply just doesn't go through. When I ping it, its all Request Timed Out, and when I tracert C:\Users\Kyle>tracert blackjaguarstudios.com Tracing route to blackjaguarstudios.com [199.188.204.228] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms CISCO26565 [192.168.1.1] 2 16 ms 15 ms 11 ms 11.4.64.1 3 11 ms 9 ms 11 ms rd1cs-ge1-2-1.ok.shawcable.net [64.59.169.2] 4 20 ms 21 ms 22 ms 66.163.76.98 5 37 ms 36 ms 35 ms rc1nr-tge0-9-2-0.wp.shawcable.net [66.163.77.54] 6 112 ms 84 ms 85 ms rc2ch-pos9-0.il.shawcable.net [66.163.76.174] 7 86 ms 89 ms 90 ms rc4as-ge12-0-0.vx.shawcable.net [66.163.64.46] 8 90 ms 84 ms 85 ms eqix.xe-3-3-0.cr2.iad1.us.nlayer.net [206.223.115.61] 9 97 ms 97 ms 99 ms xe-3-3-0.cr1.atl1.us.nlayer.net [69.22.142.105] 10 128 ms 128 ms 126 ms ae1-40g.ar1.atl1.us.nlayer.net [69.31.135.130] 11 101 ms 97 ms 96 ms as16626.xe-2-0-5-102.ar1.atl1.us.nlayer.net [69.31.135.46] 12 100 ms 97 ms 197 ms 6509-sc1.abstractdns.com [207.210.114.166] 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Trace complete. C:\Users\Kyle> SHAW Cable being my ISP. Figuring this was all something to do with some setting I made on the router, I reset the thing back to factory defaults. Nope. So I'm at a bit of a loss what to do here, as NO device (Computers, Laptops, Tablets, Phones, PS3/ 360, etc) can access my site or its features, so it's not just my computer either. But every other site is just fine. When I connect to my neighbors router, the site comes up just fine. And shes with SHAW as well. What should I do?!

  Read the article

• Tutorial for configuring OpenVPN [on hold]

  - by user2699451

  I have been through 10+ tutorials on setting up a OpenVPN, and each tutorial gives a different problem... Does anyone know of a decent and helpful website/tutorial which I could go to to get it set up? I have been battling through it for almost 2 months now. Yes, I have also bugged forums.openvpn, but I think I have "reached my post limit" with them. I have to configure it remotely via ssh. UPDATE: okay, I have been asked to be more clear on the topic I followed this tutorial (as a example) - http://www.servermom.com/how-to-build-openvpn-server-on-centos-6-x/732/ I had no issues setting up, etc. except when I boot into windows and run the OpenVPN GUI Client, it connects and gives this error: WARNING: Bad encapsulated packet length from peer (21331), which must be 0 and <= 1576 -- please ensure that --tun-mtu or --link-mtu is equal on both peers -- this condition could also indicate a possible active attack on the TCP link -- [Attemping restart...] Here is my server config: port 1194 #- port proto udp #- protocol dev tun tun-mtu 1500 tun-mtu-extra 32 mssfix 1450 reneg-sec 0 ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem plugin /usr/lib64/openvpn/plugin/lib/openvpn-auth-pam.so /etc/pam.d/login #- Co$ #plugin /etc/openvpn/radiusplugin.so /etc/openvpn/radiusplugin.cnf #- Uncomment$ client-cert-not-required username-as-common-name server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" keepalive 5 30 comp-lzo persist-key persist-tun status 1194.log verb 3 and my client config: client dev tun proto udp remote [server ip] 1194 # - Your server IP and OpenVPN Port resolv-retry infinite nobind tun-mtu 1500 tun-mtu-extra 32 mssfix 1450 persist-key persist-tun ca ca.crt auth-user-pass comp-lzo reneg-sec 0 verb 3 OpenVPN Client Log: Thu Oct 31 11:51:29 2013 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct 1 2006 Thu Oct 31 11:51:44 2013 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Thu Oct 31 11:51:44 2013 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Thu Oct 31 11:51:44 2013 LZO compression initialized Thu Oct 31 11:51:44 2013 Control Channel MTU parms [ L:1576 D:140 EF:40 EB:0 ET:0 EL:0 ] Thu Oct 31 11:51:44 2013 Data Channel MTU parms [ L:1576 D:1450 EF:44 EB:135 ET:32 EL:0 AF:3/1 ] Thu Oct 31 11:51:44 2013 Local Options hash (VER=V4): '2547efd2' Thu Oct 31 11:51:44 2013 Expected Remote Options hash (VER=V4): '77cf0943' Thu Oct 31 11:51:44 2013 Attempting to establish TCP connection with x.x.x.x:1194 Thu Oct 31 11:51:44 2013 TCP connection established with x.x.x.x:1194 Thu Oct 31 11:51:44 2013 TCPv4_CLIENT link local: [undef] Thu Oct 31 11:51:44 2013 TCPv4_CLIENT link remote: x.x.x.x:1194 // after this it just hangs, nothing happens So I dont know what I am doing wrong but I am getting a bit impatient and on each forum I post this, I get stupid/unrelated/unhelpful answers...

  Read the article

• What "pieces" are needed in order to set up a cluster of physical servers?

  - by Chris Dutrow

  Background: Currently, we use Rackspace cloud servers. We have no intention to stop using them, but would like to look into setting up a cluster of physical servers (probably desktop computers in the $400 range with 8gb memory each) to offset some of our load and work as a secondary, more powerful, less reliable system. To put things in perspective, we can buy comparable desktop computers for the same price as we pay in one month to rent them on Rackspace Cloud. I understand that this is generally a dumb idea. However, in this particular instance, the server cluster is needed for its computation power. It is not mission-critical, it does not host a consumer-facing website, and if it goes down for a day or two, its not really a problem. Currently, we have access to business class verizon fios. If I understand correctly, we can get at least 25 dedicated IP addresses with this service, this should be enough. Requirements: Each server runs Linux Centos 6.3 Some of the servers run Python and execute processes from a task queue (Redis or RabbitMQ) Some of the servers are capable of serving static files and Python driven REST APIs Some of the servers host a Cassandra database cluster One or more of the servers are a Redis database servers One or more of the servers are PostgreSQL servers Questions: What kind of router or switch is needed? We would like the computers to be able to communicate effectively with each other via internal IP addresses. This is especially important for communicating with servers hosting Redis that need to be able to respond to requests very quickly. Are there special switches or routers that need to be used to connect the servers together? Are Desktop computers ok for this? We have found that we are mostly RAM-bottle necked, I understand that some servers have highly superior CPUs, but I'm not sure we need CPU power as much as we need RAM, which is cheap in Desktop computers. Will we have problems with the WIFI cards in the desktops or any other unexpected hardware limitation? What tools should be used to "image" the servers. For example, when we get an installation right for a Redis server or Cassandra node, are there tools that come with Linux Centos 6.3 to image the server to a USB drive or something like that? Or do we need to use some other software for this? What other things are we missing that we should be concerned about? Thanks so much!

  Read the article

• How can I centralise MySQL data between 3 or more geographically separate servers?

  - by Andy Castles

  To explain the background to the question: We have a home-grown PHP application (for running online language-learning courses) running on a Linux server and using MySQL on localhost for saving user data (e.g. results of tests taken, marks of submitted work, time spent on different pages in the courses, etc). As we have students from different geographic locations we currently have 3 virtual servers hosted close to those locations (Spain, UK and Hong Kong) and users are added to the server closest to them (they access via different URLs, e.g. europe.domain.com, uk.domain.com and asia.domain.com). This works but is an administrative nightmare as we have to remember which server a particular user is on, and users can only connect to one server. We would like to somehow centralise the information so that all users are visible on any of the servers and users could connect to any of the 3 servers. The question is, what method should we use to implement this. It must be an issue that that lots of people have encountered but I haven't found anything conclusive after a fair bit of Googling around. The closest I have seen to solutions are: something like master-master replication, but I have read so many posts suggesting that this is not a good idea as things like auto_increment fields can break. circular replication, this sounded perfect but to quote from O'Reilly's High Performance MySQL, "In general, rings are brittle and best avoided" We're not against rewriting code in the application to make it work with whatever solution is required but I am not sure if replication is the correct thing to use. Thanks, Andy P.S. I should add that we experimented with writes to a central database and then using reads from a local database but the response time between the different servers for writing was pretty bad and it's also important that written data is available immediately for reading so if replication is too slow this could cause out-of-date data to be returned. Edit: I have been thinking about writing my own rudimentary replication script which would involve something like having each user given a server ID to say which is his "home server", e.g. users in asia would be marked as having the Hong Kong server as their own server. Then the replication scripts (which would be a PHP script set to run as a cron job reasonably frequently, e.g. every 15 minutes or so) would run independently on each of the servers in the system. They would go through the database and distribute any information about users with the "home server" set to the server that the script is running on to all of the other databases in the system. They would also need to suck new information which has been added to any of the other databases on the system where the "home server" flag is the server where the script is running. I would need to work out the details and build in the logic to deal with conflicts but I think it would be possible, however I wanted to make sure that there is not a correct solution for this already out there as it seems like it must be a problem that many people have already come across.

  Read the article

• Suggestions for sharing and using data between Ubuntu and Windows 7 dual boot

  - by wizjany

  Note: TL;DR, scroll to bottom for summary. I recently set up my computer for a dual boot between Ubuntu 9.10 and Windows 7. My current drive setup is as follows. | A1 | A2 | | B1 | B2 | B3 | A1: 100 mb, windows 7 "System Reserved" boot partition A2: 230 gb, data section, this one needs to be shared between the operating systems B1: 125 gb, windows 7 OS B2: 123 gb, ubuntu OS B3: 2gb, linux swap space Pretty much i want to have my documents, music, pictures, videos, etc accessible from both operating systems. My first attempt involved making the data (a2) partition NTFS, and moving my home folder from ubuntu to the data partition. However, as I read NTFS does not work nice with permission, and it messed up my home folder. My next idea is one of the following: 1) format the data partition to ext2/3/4 and move my home folder from linux there, and get a driver to read ext partitions in windows 7. The problem with that is that most of the ext drivers/software are not compatible with windows 7 or do not integrate with windows explorer (I really don't want to open a separate software window just to access my data, plus it's probably not compatible with other software.) http://www.fs-driver.org/ looks promising, but I'm not sure how it works with ext4 and windows 7 (not officially supported, when trying in vista compatibility mode, it tells me I need to format the ext drive to use it). My next idea, 2) keep the home folder in ubuntu where it is, but create symlinks for the Documents, Music, etc folders to an NTFS formatted Data (A2) partition, and add those locations to the windows 7 libraries. I'm not totally sure how the permissions would work out, but it should be fine since it's only the documents, music, etc and not the important config files in the rest of /home/user/. Correct me if I'm wrong. Currently, symlinks is my best idea, although i'm not sure how it will work. Any suggestions, additions to my ideas, links, pointers, whatever would be greatly appreciated. Even if it means i should reformat both my drives and repartition (2 250gb drives if you want to suggest a setup for that), I won't be too opposed if that's the best suggestion (I've gone through the format/install/format/reinstall process 5 times over the past 3 days, once more won't hurt me). TL;DR, summary: I have two hard drives. One is partitioned for Ubuntu and Windows 7, the second one I want accessible to both operating systems to store documents, music, pictures, videos, etc. Suggestions on how to set up the data drive please =) P.S. bonus if I can get an apache server document root folder working between the two OS's as well (permissions could become very complicated, so don't worry too much about that) P.P.S. Related question, but data viewing is one way: http://superuser.com/questions/84586/partition-scheme-and-size-for-dual-boot-windows-7-and-ubuntu-9-10-with-separate-p

  Read the article

• Toshiba Satellite L630 broken after bios update

  - by Mustafa Kamal

  I have Toshiba Satellite L630, which has been broken. It had no more OS installed in it. All the disk partition were cleared into one single empty unformatted partition. So I begin to install windows XP on this laptop. Apparently, win XP's driver support for this laptop is very limited. So I have to find almost all important driver (display, sound, etherned, wireless etc) on the net and install it manually one by one. So I start googling, and I got some driver download page from several Toshiba's website (the global version, the europe, asia, etc). Pretty hard to find the exact drivers, but I managed to find pretty good drivers. It's all works quite fine, although still have a few glitches. But everything turned into a big mess when I downloaded the "BIOS Update", which is also listed on Toshiba's official driver directory site. When I installed it, it show a big red warning sign telling me not to do anything while flashing the BIOS . I follow that instruction prudently. The process was finished, and that update BIOS software (it is InsydeH2O BIOS) told me that the BIOS has been succesfully updated and the computer need to restart. So I restart the computer. This is where the problem appear. I can no longer boot to my laptop. The booting process seems to be able to enter windows for a moment (it shows the windows XP loading screen), and then suddenly it just got that hateful blue screen and then instantiy restarts the machine. It goes on a loop. Boot bios - enter XP - blue screen - restart. I can't even try to reinstall my win XP again. Evertime the machine tries to boot to win XP CD, it got the same blue screen as I gets when loading from HDD. Many google search results said that I should open the laptop cover and try to clear CMOS with some kind of jumper or something. Or to unplug/re-plug the CMOS battery. Do I really need to do that? Is there anyway I could do without disassembling my laptop? I read some tricks about booting from USB device but I can't get the exat tools that I need to do that thing... Btw, this is my detailed laptop number photographed from the back of my laptop

  Read the article

• Subversion - Retrieval of mergeinfo unsupported

  - by jamesthomson

  Hi, I've recently updated my Subversion package on Debian Etch to 1.5.1 via a back-port. I've gone through what I believe are all the appropriate steps but cannot for the life of me get past the following error message when I try to merge: Retrieval of mergeinfo unsupported by '.' The '.' isn't important as I get the same message whether I'm SSH'd on to the server or using TortoiseSVN through Windows. I'll take you through what I did to upgrade and test step by step: Update of Subversion Added the following line to /etc/apt/sources.list: deb http://www.backports.org/debian etch-backports main contrib non-free and then ran apt-get -s -t etch-backports install subversion Checked the version of the subversion installation Done this by running svnadmin --version and got the following output: svnadmin, version 1.5.1 (r32289) compiled Dec 11 2008, 18:10:14 Checked the client too using svn --version and got the following svn, version 1.5.1 (r32289) compiled Dec 11 2008, 18:10:14 Ok, so all looking good so far. Now I just need to upgrade the repository. After plenty of research, the most foolproof way to do this seemed to be to dump the repository and then load it again. So here's what I did: svnadmin dump /var/svn/repo > repo.dump rm -aR /var/svn/repo/* svnadmin create /var/svn/repo svnadmin load < repo.dump All that seemed to work fine. I then checked to see if the repository had been upgraded by looking at the contents of /var/svn/repo/db/format which gave: 3 layout sharded 1000 Again this indicated a Subversion 1.5 repository so all looking good. Now I try and do a merge using the Subversion client in Debian: svn mergeinfo https://mysvn/repo . and I get the following error: svn: Retrieval of mergeinfo unsupported by '.' I get the same error message whether I'm using the Debian shell on the same server or if I'm connecting via TortoiseSVN and a Windows box. If I browse to the repository using my web browser, the version number at the bottom reads: Powered by Subversion version 1.4.2 (r22196). In case it helps, the created date on mod_dav_svn.so is 2009-08-06 18:29 I just cannot figure out why I'm getting this message so any help pointing me in the right direction would be greatly appreciated. All the forum and mailing list posts that I found relating to this error were solved by doing an svnadmin upgrade, though I have actually tried that and still no joy. Thanks in advance, James.

  Read the article

• LDAP installed, running, but can't connect remotely [Ubuntu 10.10]

  - by Casey Jordan

  Hi all, I installed LDAP on my ubuntu 10.10 system, using the tutorial found here: https://help.ubuntu.com/10.10/serverguide/C/openldap-server.html Everything seems to be working well, when logged into the server via ssh I can run commands like: > ldapsearch -xLLL -b "dc=easydita,dc=com" uid=john sn givenName cn dn: uid=john,ou=people,dc=easydita,dc=com sn: Doe givenName: John cn: John Doe So I think that's a good sign that things are working well. However I have had zero luck connecting to the server remotely via GUI tools or command line. I have tied JXplorer, and LDAP administration tool. Running commands like this: > ldapsearch -xLLL -W -H ldap://ice.rit.edu -d1 "dc=easydita,dc=com" ldap_url_parse_ext(ldap://ice.rit.edu) ldap_create ldap_url_parse_ext(ldap://ice.rit.edu:389/??base) Enter LDAP Password: ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP ice.rit.edu:389 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:389 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({i) ber: ber_flush2: 34 bytes to sd 3 ldap_result ld 0xb8940170 msgid 1 wait4msg ld 0xb8940170 msgid 1 (infinite timeout) wait4msg continue ld 0xb8940170 msgid 1 all 1 ** ld 0xb8940170 Connections: * host: ice.rit.edu port: 389 (default) refcnt: 2 status: Connected last used: Thu Mar 17 19:42:29 2011 ** ld 0xb8940170 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0xb8940170 request count 1 (abandoned 0) ** ld 0xb8940170 Response Queue: Empty ld 0xb8940170 response count 0 ldap_chkResponseList ld 0xb8940170 msgid 1 all 1 ldap_chkResponseList returns ld 0xb8940170 NULL ldap_int_select read1msg: ld 0xb8940170 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 16 contents: read1msg: ld 0xb8940170 msgid 1 message type bind ber_scanf fmt ({eAA) ber: read1msg: ld 0xb8940170 0 new referrals read1msg: mark request completed, ld 0xb8940170 msgid 1 request done: ld 0xb8940170 msgid 1 res_errno: 49, res_error: <>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_err2string ldap_bind: Invalid credentials (49) I am pretty sure that I set up the admin password correctly, but the tutorial was not very specific about that. (Also could not find instructions on how to reset admin password.) Additional info: I was told that this file might hold important information so I will post it: /etc/ldap/slapd.d/cn=config/olcDatabase={0}config.ldif dn: olcDatabase={0}config objectClass: olcDatabaseConfig olcDatabase: {0}config olcAccess: {0}to * by dn.exact=cn=localroot,cn=config manage by * break olcRootDN: cn=admin,cn=config structuralObjectClass: olcDatabaseConfig entryUUID: eca09490-e524-102f-87c5-17d7a82e8985 creatorsName: cn=config createTimestamp: 20110317205733Z entryCSN: 20110317205733.193089Z#000000#000#000000 modifiersName: cn=config modifyTimestamp: 20110317205733Z Given that it seems I have this almost set up correctly is there any steps I can take to correct this? Thanks, Casey

  Read the article

• Trouble setting up PATH for Java on Debian

  - by milkmansrevenge

  I am trying to get Oracle Java 7 update 3 working correctly on Debian 6. I have downloaded and set up the files in /usr/java/jre1.7.0_03. I have also set the following two lines at the end of /etc/bash.bashrc: export JAVA_HOME=/usr/java/jre1.7.0_03 export PATH=$PATH:$JAVA_HOME/bin Logging in as other users and root is fine, Java can be found: chris@mc:~$ java -version java version "1.7.0_03" Java(TM) SE Runtime Environment (build 1.7.0_03-b04) Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode) However there are two cases where Java cannot be found as detailed below. Note that both of these worked fine when I have previously installed OpenJDK Java 6 via aptitude, but I need Oracle Java 7 for various reasons. Most importantly, I cannot run commands as another user via su, despite the PATH showing that Java should be present. The user was created with adduser chris root@mc:~# su chris -c "echo $PATH" /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/java/jre1.7.0_03/bin:/bin root@mc:~# su chris -c "java -version" bash: java: command not found root@mc:~# su chris -c "/usr/java/jre1.7.0_03/bin/java -version" java version "1.7.0_03" ... How can it be in the PATH but not be found? Update 05/04/2012: explained by Daniel, to do with it being a non-interactive shell so files such as /etc/profile and /etc/bash.bashrc are not executed. Doing a full swap to that user and running Java works: root@mc:~# su chris chris@mc:/root$ java -version java version "1.7.0_03" ... I run a script on start up which exhibits similar but slightly different problems. The script is located in /etc/init.d/start-mystuff.sh and calls a jar: #!/bin/bash # /etc/init.d/start-mystuff.sh java -jar /opt/Mars.jar I can confirm that the script runs on start up and the exit code is 127, which indicates command not found. Inserting a line to print/save the PATH shows that it is: /sbin:/usr/sbin:/bin:/usr/bin This second problem isn't as important because I can just point directly to the Java executable in the script, but I am still curious! I have tried setting the full PATH and JAVA_HOME explicitly in /etc/environment which didn't help. I have also tried setting them in /etc/profile which doesn't seem to help either. I have tried logging in and out again after setting PATH in the various locations (duh!). Anyway, long post for what will probably have a simple one line solution :( Any help with this would be greatly appreciated, I have spent far too long trying to fix it by myself. Motivation The first problem may seem obscure but in my system I have users that are not allowed SSH access yet I still want to run processes as them. I have a ton of scripts operating in this way and don't want to have to change them all.

  Read the article

• Hylafax / Capi4hylafax: faxgetty does not recognize number of lines

  - by Wrikken

  We've got a T.30 card, 30 working lines on it, but for some reason, if I add more then 30 faxes in the queue at any time (and we're busy enough at peak times that this happens a lot), faxgetty sends faxes to non-existent lines and they appear in the error queue as a 'busy' signal on the line, which results in a lot of failed faxes because the counter of max 3 tries increases rapidly. This is using faxgetty (USE_FAXGETTY="y" in /etc/default/hylafax). I've inherited this thing, so I'm not entirely sure how faxgetty is supposed to know the number of lines. However, if I alter the script to faxmodem (USE_FAXGETTY="n" in /etc/default/hylafax and manually enabling 30 modems), this behavior goes away (new faxes 'wait' for a line to be available before trying to send, so each try / fail is a valid one on a working line, majorly descreasing the amount of failed faxes. However, when researching this almost anyone talks about faxgetty being the preferred, more robust, method, and on top of that for some unexplained reason all FIFO's disappeared for some reason after several errorless hours with faxmodem, forcing a hylafax restart using faxgetty until we figured out why this faxmodem solution failed (which is another question, and somewhat out of scope here). Environment: Debian 2.6.26-2-amd64 capi4hylafax 1:01.03.00.99.svn.300-12 hylafax-client 2:4.4.4-10.1 hylafax-server 2:4.4.4-10.1 Config --hfaxd.conf-- LogFacility: daemon ServerTracing: 0x1ff --hyla.conf-- Host: localhost Verbose: No VRes: 196 TimeZone: local DialRules: "/etc/hylafax/dialrules.europe" --/etc/hylafax/config -- InternationalPrefix: 00 LongDistancePrefix: 0 AreaCode: 99999 CountryCode: 31 DialStringRules: "etc/dialrules.europe" ModemGroup: any:faxCAPI SendFaxCmd: "/usr/bin/wrapc2faxsend" --/etc/hylafax/config.faxCAPI -- SpoolDir: /var/spool/hylafax FaxRcvdCmd: /var/spool/hylafax/bin/faxrcvd PollRcvdCmd: /var/spool/hylafax/bin/pollrcvd FaxReceiveUser: uucp FaxReceiveGroup: dialout LogFile: /var/spool/hylafax/log/capi4hylafax #no, checking this log did not yield anything interesting LogTraceLevel: 4 LogFileMode: 0600 ModemGroup: any:faxCAPI #repeats of faxCAPI2 = faxCAPI30, with of course another devicename/local ident: { HylafaxDeviceName: faxCAPI RecvFileMode: 0600 FAXNumber: ****redacted**** LocalIdentifier: ****some-ident-per-device*** MaxConcurrentRecvs: 0 OutgoingController: 1 OutgoingMSN: SuppressMSN: 0 NumberPrefix: NumberPlusReplacer: "00" UseISDNFaxService: 0 RingingDuration: 0 { Controller: 1 AcceptSpeech: 0 UseDDI: 0 DDIOffset: DDILength: 0 IncomingDDIs: IncomingMSNs: AcceptGlobalCall: 1 } } So in short: How does faxgetty determine the number of lines available? (the man page isn't terribly revealing, and I can't find an appropriate setting in hylafax-config. And how can I get a capi4hylafax/hylafax setup which queues more faxes then lines are available correctly without immediately incrementing the fail count? We will not be receiving any faxes on this machine b.t.w. As I said, I've inherited this thing, so if there are important configuration options I'm not including, please let me know.

  Read the article

• IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well.

  - by Thomas

  Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

  Read the article

• Vagrant - Failed login, ssh not set up

  - by motleydev

  This question is two fold because somewhere in my attempts to solve the problem, I created a new one. First: I was trying to vagrant up using a Vagranfile based on the standard hashicorp/precise32 box. Everything worked up until default: SSH auth method: private key where it would eventually time out. Enabling gui in the Vagrantfile showed that the machine never actually logs in. I can use the standard user/pass and log in from that point but the vagrant up process still remains at that prior status. Here's where my understanding might be a little dim. I've tried setting auth method from the insecure_pass_key to my root ~/.ssh/id_rsa or whichever one I wanted to use. I'm not entirely sure where to put a copy of the public key or my authorized keys file. I've got a .vagrant.d folder in my user dir (I'm on OSX) which seems to contain the box images. I've got a .vagrant folder in my directory with the Vagrantfile which seems to contain the specific machine I am building off of. I've tried pouring over the docs and forums but I seem to be missing a key concept here. And Now: After a host of tips/tricks such as rolling back by VirtualBox install, uninstalling/reinstalling Vagrant and VritualBox several times, when I try to run vagrant ssh-config with a Vagrantfile based on the same hashicorp/precise32 it says that the box is not enabled for SSH. Specifically, this error: The provider for this Vagrant-managed machine is reporting that it is not yet ready for SSH. Depending on your provider this can carry different meanings. Make sure your machine is created and running and try again. Additionally, check the output of `vagrant status` to verify that the machine is in the state that you expect. If you continue to get this error message, please view the documentation for the provider you're using. So now I am slightly up a creek. Any help would be appreciated if not just clarifying a concept. Some pertinent info: I'm on OSX Maverics Due to the fact I'm running a dual HD system with system files on one HD and user files on another, my permissions are a little wonky and VBoxManage will only let me run commands via Sudo - not sure if it's pertinent - but maybe. I have no idea what I'm doing. That part is perhaps more important.

  Read the article

• What PHP, Xdebug and Eclipse configurations work on Windows 7 64 bit?

  - by thaddeusmt

  I have been mucking around for days, trying to find the right combination that lets me debug with breakpoints and variable viewing, in Eclipse, without crashing Apache. PHP 5.3? PHP 5.2? Eclipse Helios? Eclipse Galileo? One or the other with certain versions of xdebug or php? Or do I really need to use NetBeans or something else? Is my 64 bit OS the problem? Do need specific 64bit versions of PHP, Eclipse or Xdebug to work on Windows 7 64? Any special xdebug config options and tricks that I need in php.ini? Like turning off xdebug.profiler_enable or not using quotes around my zend_extension path to the xdebug dll? A Vhosts issue? Scrap the whole thing and go back to Win XP or Ubuntu? Here's what I've already been reading: http://stackoverflow.com/questions/4509245/so-eclipse-and-xdebug-walk-into-a-bar-and-then-my-apache-server-dies/4602473 http://stackoverflow.com/questions/206788/why-does-xdebug-crash-apache-on-every-xampp-install-ive-tried http://bugs.xdebug.org/view.php?id=459 https://bugs.eclipse.org/bugs/show_bug.cgi?id=312951#c8 http://stackoverflow.com/questions/2799936/xdebug-for-php-5-2-on-windows-7-64bit and so and so on... SO, xdebug bug tracker, eclipse bugzilla, etc, etc Basically what would be great is if folks could post their working (i.e. debugging with breakpoints and local variable viewing in Eclipse) Win7 64bit configurations, including: PHP version (5.3.1, 5.2.11, etc) Xdebug dll (2.1.0-5.3-vc6, etc) Xdebug php.ini config (zend_extension = "C:\xampp\php\ext\php_xdebug.dll", etc) Apache version (2.2.14, etc) Eclipse version Anything else important? The "secret ingredient"? Thanks! I miss my debugger since I got a new laptop with Win 7! Sadly it looks like some of the drivers (switchable graphics, multi-touch pad, etc) on my lappy don't work right with Ubuntu yet, so I feel a bit trapped on Win :( I know I will figure something out eventually, but I've been at this trial-and-error game a while and am seeking some guidance. (Originally posted on StackOverflow here, but moved to SuperUser:) http://stackoverflow.com/questions/4628215/what-php-xdebug-and-eclipse-configurations-work-on-windows-7-64-bit

  Read the article

• Looking for a Software to harden Windows machines

  - by MosheH

  I'm a network administrator of a small/medium network. I'm looking for a software (Free or Not) which can harden Windows Computers (XP And Win7) for the propose of hardening standalone desktop computers (not in domain network). Note: The computers are completely isolated (standalone), so i can't use active directory group policy. moreover, there are too many restriction that i need to apply, so it is not particle to set it up manual (one by one). Basically what I’m looking for is a software that can restrict and disable access for specific user accounts on the system. For Example: User john can only open one application and nothing else -- He don’t see no icon on the desktop or start menu, except for one or two applications which i want to allow. He can't Right click on the desktop, the task-bar icons are not shown, there is no folder options, etc... User marry can open a specific application and copy data to one folder on D drive. User Dan, have access to all drives but cannot install software, and so on... So far ,I've found only the following solutions, but they all seems to miss one or more feature: Desktop restriction Software 1. Faronics WINSelect The application seems to answer most of our needs except one feature which is very important to us but seems to be missing from WINSelect, which is "restriction per profile". WINSelect only allow to set up restrictions which are applied system-wide. If I have multiple user accounts on the system and want to apply different restrictions for each user, I cant. Deskman (No Restriction per user)- Same thing, no restriction per profile. Desktop Security Rx - not relevant, No Win7 Support. The only software that I've found which is offering a restriction per profile is " 1st Security Agent ". but its GUI is very complicated and not very intuitive. It's worth to mention that I'm not looking for "Internet Kiosk software" although they share some features with the one I need. All I need is a software (like http://www.faronics.com/standard/winselect/) that is offering a way to restrict Windows user interface. So IF anybody know an Hardening software which allows to set-up user restrictions on Windows systems, It will be a big, big, big help for me! Thanks to you all

  Read the article

• Revolutionary brand powder packing machine price from affecting marketplace boom and put on uniform in addition to a lengthy service life

  - by user74606

  In mining in stone crushing, our machinery company's encounter becomes much more apparent. As a consequence of production capacity in between 600~800t/h of mining stone crusher, stone is mine Mobile Cone Crushing Plant Price 25~40 times, effectively solved the initially mining stone crusher operation because of low yield prices, no upkeep problems. Full chunk of mining stone crusher. Maximum particle size for crushing 1000x1200mm, an effective answer for the original side is mine stone provide, storing significant chunks of stone can not use complications in mines. Completed goods granularity is modest, only 2~15mm, an effective option for the original mine stone size, generally blocking chute production was an issue even the grinding machine. Two types of material mixed great uniformity, desulfurization of mining stone by adding weight considerably. Present quantity added is often reached 60%, effectively minimizing the cost of raw supplies. Electrical energy consumption has fallen. Dropped 1~2KWh/t tons of mining stone electrical energy consumption, annual electricity savings of one hundred,000 yuan. Efficient labor intensity of workers and also the atmosphere. Due to mine stone powder packing machine price a high degree of automation, with out human make contact with supplies, workers working circumstances enhanced significantly. Positive aspects, and along with mine for stone crushing, CS series cone Crusher has the following efficiency traits. CS series cone Crusher Chamber is divided into 3 unique designs, the user is usually chosen in accordance with the scenario on site crushing efficiency is high, uniform item size, grain shape, rolling mortar wall friction and put on uniform in addition to a extended service life of crushing cavity-. CS series cone Crusher utilizes a one of a kind dust-proof seal, sealing dependable, properly extend the service life of the lubricant replacement cycle and parts. CS series Sprial Sand washer price manufacture of important components to choose unique materials. Each and every stroke left rolling mortar wall of broken cone distances, by permitting a lot more products into the crushing cavity, as well as the formation of big discharge volume, speed of supplies by way of the crushing Chamber. This machine makes use of the principle of crushing cavity, also as unique laminated crushing, particle fragmentation, so that the completed product drastically improved the proportions of a cube, needle-shaped stones to lower particle levels extra evenly.

  Read the article

• Malicious program changing my DNSs

  - by julio.alegria

  Some weeks ago I started having problems with my internet connection, it was extremely slow and suddently some websites (specifically gmail, facebook, youtube and twitter) started failing to connect, while the rest connect normally. Some days after, those same websites started showing me a message in portuguese: "Nova atualização disponível" whenever I tried to connect and a .exe file started downloading ("internet_update.exe" or something like that). That's when I freaked out! It was definitely a virus or something like that, but it was really weird because I never had a problem like that (I run Linux). So I turned on my old PC (running Windows XP) and it turned out it had the same problem! the same message was showed whenever I tried to connect one of those specific websites, while the rest loaded without problems. Even in my Android smarthphone the same message was showed. So it was obvious that the problem was not in a particular machine but in the router itself. So I started googling and I found some information, unfortunately I only found some in spanish, so I will make you a short summary: It is a new banking trojan developed specifically to infect and collect information from Brasilian banks. Apparently now it has expanded to Argentina and Peru. So how does it work? It spreads through social networks (videos, links, ...) and then it "takes control" of your internet connection by changing the values of your DNSs. More specifically, it changes the Primary DNS to one of this IPs: 108.170.13.38, 66.7.216.122 or 63.143.43.154 and the Secondary DNS to 8.8.8.8, this secondary DNS is actually the Google Public DNS, and it is configured this way so that your internet connection continue working properly and the user does not notice anything. The important part here is that because no download or install has been made in your machine, no antivirus will notice any change. After your DNSs have been changed, the trojan controls every single website you connect to and this way they steal your bank information. So after reading about this I accesed to my router and I restored my Primary and Secondary DNSs to their proper values, but one day after I had the same problem again. This is actually a 50% warning post - 50% help me! post. So, here comes the question: Is there any possible way to prevent my DNSs of being changed?

  Read the article

• When running a shell script, how can you protect it from overwriting or truncating files?

  - by Joseph Garvin

  If while an application is running one of the shared libraries it uses is written to or truncated, then the application will crash. Moving the file or removing it wholesale with 'rm' will not cause a crash, because the OS (Solaris in this case but I assume this is true on Linux and other *nix as well) is smart enough to not delete the inode associated with the file while any process has it open. I have a shell script that performs installation of shared libraries. Sometimes, it may be used to reinstall versions of shared libraries that were already installed, without an uninstall first. Because applications may be using the already installed shared libraries, it's important the the script is smart enough to rm the files or move them out of the way (e.g. to a 'deleted' folder that cron could empty at a time when we know no applications will be running) before installing the new ones so that they're not overwritten or truncated. Unfortunately, recently an application crashed just after an install. Coincidence? It's difficult to tell. The real solution here is to switch over to a more robust installation method than an old gigantic shell script, but it'd be nice to have some extra protection until the switch is made. Is there any way to wrap a shell script to protect it from overwriting or truncating files (and ideally failing loudly), but still allowing them to be moved or rm'd? Standard UNIX file permissions won't do the trick because you can't distinguish moving/removing from overwriting/truncating. Aliases could work but I'm not sure what entirety of commands need to be aliased. I imagine something like truss/strace except before each action it checks against a filter whether to actually do it. I don't need a perfect solution that would work even against an intentionally malicious script. Ideas I have so far: Alias cp to GNU cp (not the default since I'm on Solaris) and use the --remove-destination option. Alias install to GNU install and use the --backup option. It might be smart enough to move the existing file to the backup file name rather than making a copy, thus preserving the inode. "set noclobber" in ~/.bashrc so that I/O redirection won't overwrite files

  Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >