Search Results

Search found 1873 results on 75 pages for 'andy score'.

Page 28/75 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Recover strategy single bad sector in moricon

    - by Damon
    This week, my harddisk made me an early christmas present in the form of a single defect sector. To make up for the puny size of the present, it chose a sector inside moricons.dll for that. This means that now the system takes about 5 minutes to boot before Windows gives up and moves on, and there's 2 dozen scary "critical failure" entries in the system log after every boot, which is annoying. OK, admittedly, I shouldn't complain, it could be worse, the bad sector could be in ntldr... SMART info more or less indicates (for what SMART can indicate anyway) that the drive is mostly OK. Soft Read Error Rate has a score of 96, and Current Pending Sector Count has a raw value of 8, which translates to a score of 100. Acronis DriveMonitor makes this an issue (lowering the overall rating to 75%), HDD Health calls it "excellent", giving an overall rating of 95% (which is what this harddisk from day one). No single score is below 95 (power on hours and spin up count), and most are 100 anyway. Well, whatever, I've seen drives with perfect SMART values fail from one second to the other, and drives with moderate values work for years. So, I'm inclined not to put too much weight into that overall. TL;DR Now... to the problem: I don't feel like trashing the disk just yet (that's planned with a new OS install upgrading to Win7 early next year, independently of this issue), but in the mean time, I would still like to have a smoothly running system again. Therefore, I feel tempted to tamper with it, but before I render my system entirely unusable (since I've never done this before), I'd like to verify that my planned procedere is likely to suceed in having a working system again: Copy moricons.dl_ from the Windows install disk, rename it to moricons.zip, and unzip it. This gives an intact 5.1.2600.2180 version (the broken one is 5.1.2600.5512 - but I guess this makes not much of a difference, since it's an icon-only DLL, and an outdated copy should work better than one that can't be read) Run chkdsk /r /f` which will "repair" the file (i.e. delete the file without asking, tell the drive to remap the sector, and toss some unreadable junk into a file with a hexadecimal number) Hopefully Windows still boots after this (is that a reasonable expectation, or do I need to have something like BartPE ready? -- but then again, what's that good for in case chkdsk has nuked the entire file system...) Delete the junk file generated by chkdsk, copy the new DLL to %windir%\system32 Reboot. Pray. Maybe I just shouldn't touch anything, since it still kind of works... if annoying, but it works. Unsure... But, is there anything fundamentally wrong with the planned approach? Is this a sensible approach at all?

    Read the article

  • debian out of memory error server crash

    - by user42700
    hi, the server keeps crashing due to apache, is there any way i can stop this, the server has 2GB swap space and 3GB ram May 25 03:33:41 server kernel: [ 3513.200719] [<c015959c>] out_of_memory+0x14e/0x17f May 25 03:33:41 server kernel: [ 3513.211491] Out of memory: kill process 2936 (apache2) score 87364 or a child May 25 04:35:30 server kernel: [ 7239.936995] [<c015959c>] out_of_memory+0x14e/0x17f May 25 04:35:30 server kernel: [ 7239.948878] Out of memory: kill process 2936 (apache2) score 88236 or a child May 25 05:42:57 server kernel: [11210.572510] [<c015959c>] out_of_memory+0x14e/0x17f May 25 08:13:23 server kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000

    Read the article

  • expand/collpase datagrid

    - by prince23
    hi, i have an nested datagrid . i able to bind the values with no issues once i clik teh row i able to show nested grid. now i need to add an image button( like an "+ " Symbol ) at the left corner. once i press this button the grid shows the further records under it. that time i need to repalce the image button with ("--" symbol). i have these two images done. but how to do this is really a big issue now for me.can any one help me out.struck on this issue from past 3 days. plz plz provide an solution on this. i would be really thank full for you guys . am new to silver light this is my code. <sdk:DataGrid MinHeight="100" x:Name="dgCounty" AutoGenerateColumns="False" VerticalAlignment="Top" Grid.Row="1" IsReadOnly="True" Margin="5,5,5,0" RowDetailsVisibilityChanged="dgCounty_RowDetailsVisibilityChanged" RowDetailsVisibilityMode="VisibleWhenSelected"> <sdk:DataGrid.Columns> <sdk:DataGridTemplateColumn CanUserReorder="False"> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate> <Button Content="+" Click="Button_Click"></Button> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> <sdk:DataGridTextColumn Header="ID" Width="100" Binding="{Binding EmployeeID}" CanUserReorder="False"/> <sdk:DataGridTextColumn Header="FirstName" Width="80" Binding="{Binding EmployeeFName}" CanUserReorder="False"/> <sdk:DataGridTextColumn Header="LastName" Width="80" Binding="{Binding EmployeeLName}" CanUserReorder="False"/> <sdk:DataGridTextColumn Header="MailID" Width="80" Binding="{Binding EmployeeMailID}" CanUserReorder="False"/> </sdk:DataGrid.Columns> <sdk:DataGrid.RowDetailsTemplate> <DataTemplate> <sdk:DataGrid x:Name="dgrdRowDetail" Width="400" AutoGenerateColumns="False" HorizontalAlignment="Center" IsReadOnly="True" > <sdk:DataGrid.Columns> <sdk:DataGridTextColumn Header="CompanyName" Binding="{Binding CompanyName}"/> <sdk:DataGridTextColumn Header="CompanyID" Binding="{Binding CompanyID}"/> <sdk:DataGridTemplateColumn Header="Score"> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate > <StackPanel Loaded ="StackPanel_Loaded" Orientation="Horizontal" Background="Transparent"> <TextBlock Text="{Binding Score}" TextWrapping="NoWrap" HorizontalAlignment="Center" Foreground="Blue"></TextBlock> <!--<Image Source ="../Images/image1.JPG" Width="20" Height="20" Stretch ="Fill"/>--> <Image x:Name="imgScore" Source ="{Binding Score}" Width="20" Height="20" Stretch ="Fill"/> <sdk:Label Content="Score" /> </StackPanel> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> </sdk:DataGrid.Columns> </sdk:DataGrid> private void Button_Click(object sender, RoutedEventArgs e) { //how to handle this issue. } if possiable plz provide the code that can help me out.

    Read the article

  • A* (A-star) implementation in AS3

    - by Bryan Hare
    Hey, I am putting together a project for a class that requires me to put AI in a top down Tactical Strategy game in Flash AS3. I decided that I would use a node based path finding approach because the game is based on a circular movement scheme. When a player moves a unit he essentially draws a series of line segments that connect that a player unit will follow along. I am trying to put together a similar operation for the AI units in our game by creating a list of nodes to traverse to a target node. Hence my use of Astar (the resulting path can be used to create this line). Here is my Algorithm function findShortestPath (startN:node, goalN:node) { var openSet:Array = new Array(); var closedSet:Array = new Array(); var pathFound:Boolean = false; startN.g_score = 0; startN.h_score = distFunction(startN,goalN); startN.f_score = startN.h_score; startN.fromNode = null; openSet.push (startN); var i:int = 0 for(i= 0; i< nodeArray.length; i++) { for(var j:int =0; j<nodeArray[0].length; j++) { if(!nodeArray[i][j].isPathable) { closedSet.push(nodeArray[i][j]); } } } while (openSet.length != 0) { var cNode:node = openSet.shift(); if (cNode == goalN) { resolvePath (cNode); return true; } closedSet.push (cNode); for (i= 0; i < cNode.dirArray.length; i++) { var neighborNode:node = cNode.nodeArray[cNode.dirArray[i]]; if (!(closedSet.indexOf(neighborNode) == -1)) { continue; } neighborNode.fromNode = cNode; var tenativeg_score:Number = cNode.gscore + distFunction(neighborNode.fromNode,neighborNode); if (openSet.indexOf(neighborNode) == -1) { neighborNode.g_score = neighborNode.fromNode.g_score + distFunction(neighborNode,cNode); if (cNode.dirArray[i] >= 4) { neighborNode.g_score -= 4; } neighborNode.h_score=distFunction(neighborNode,goalN); neighborNode.f_score=neighborNode.g_score+neighborNode.h_score; insertIntoPQ (neighborNode, openSet); //trace(" F Score of neighbor: " + neighborNode.f_score + " H score of Neighbor: " + neighborNode.h_score + " G_score or neighbor: " +neighborNode.g_score); } else if (tenativeg_score <= neighborNode.g_score) { neighborNode.fromNode=cNode; neighborNode.g_score=cNode.g_score+distFunction(neighborNode,cNode); if (cNode.dirArray[i]>=4) { neighborNode.g_score-=4; } neighborNode.f_score=neighborNode.g_score+neighborNode.h_score; openSet.splice (openSet.indexOf(neighborNode),1); //trace(" F Score of neighbor: " + neighborNode.f_score + " H score of Neighbor: " + neighborNode.h_score + " G_score or neighbor: " +neighborNode.g_score); insertIntoPQ (neighborNode, openSet); } } } trace ("fail"); return false; } Right now this function creates paths that are often not optimal or wholly inaccurate given the target and this generally happens when I have nodes that are not path able, and I am not quite sure what I am doing wrong right now. If someone could help me correct this I would appreciate it greatly. Some Notes My OpenSet is essentially a Priority Queue, so thats how I sort my nodes by cost. Here is that function function insertIntoPQ (iNode:node, pq:Array) { var inserted:Boolean=true; var iterater:int=0; while (inserted) { if (iterater==pq.length) { pq.push (iNode); inserted=false; } else if (pq[iterater].f_score >= iNode.f_score) { pq.splice (iterater,0,iNode); inserted=false; } ++iterater; } } Thanks!

    Read the article

  • Astar implementation in AS3

    - by Bryan Hare
    Hey, I am putting together a project for a class that requires me to put AI in a top down Tactical Strategy game in Flash AS3. I decided that I would use a node based path finding approach because the game is based on a circular movement scheme. When a player moves a unit he essentially draws a series of line segments that connect that a player unit will follow along. I am trying to put together a similar operation for the AI units in our game by creating a list of nodes to traverse to a target node. Hence my use of Astar (the resulting path can be used to create this line). Here is my Algorithm function findShortestPath (startN:node, goalN:node) { var openSet:Array = new Array(); var closedSet:Array = new Array(); var pathFound:Boolean = false; startN.g_score = 0; startN.h_score = distFunction(startN,goalN); startN.f_score = startN.h_score; startN.fromNode = null; openSet.push (startN); var i:int = 0 for(i= 0; i< nodeArray.length; i++) { for(var j:int =0; j<nodeArray[0].length; j++) { if(!nodeArray[i][j].isPathable) { closedSet.push(nodeArray[i][j]); } } } while (openSet.length != 0) { var cNode:node = openSet.shift(); if (cNode == goalN) { resolvePath (cNode); return true; } closedSet.push (cNode); for (i= 0; i < cNode.dirArray.length; i++) { var neighborNode:node = cNode.nodeArray[cNode.dirArray[i]]; if (!(closedSet.indexOf(neighborNode) == -1)) { continue; } neighborNode.fromNode = cNode; var tenativeg_score:Number = cNode.gscore + distFunction(neighborNode.fromNode,neighborNode); if (openSet.indexOf(neighborNode) == -1) { neighborNode.g_score = neighborNode.fromNode.g_score + distFunction(neighborNode,cNode); if (cNode.dirArray[i] >= 4) { neighborNode.g_score -= 4; } neighborNode.h_score=distFunction(neighborNode,goalN); neighborNode.f_score=neighborNode.g_score+neighborNode.h_score; insertIntoPQ (neighborNode, openSet); //trace(" F Score of neighbor: " + neighborNode.f_score + " H score of Neighbor: " + neighborNode.h_score + " G_score or neighbor: " +neighborNode.g_score); } else if (tenativeg_score <= neighborNode.g_score) { neighborNode.fromNode=cNode; neighborNode.g_score=cNode.g_score+distFunction(neighborNode,cNode); if (cNode.dirArray[i]>=4) { neighborNode.g_score-=4; } neighborNode.f_score=neighborNode.g_score+neighborNode.h_score; openSet.splice (openSet.indexOf(neighborNode),1); //trace(" F Score of neighbor: " + neighborNode.f_score + " H score of Neighbor: " + neighborNode.h_score + " G_score or neighbor: " +neighborNode.g_score); insertIntoPQ (neighborNode, openSet); } } } trace ("fail"); return false; } Right now this function creates paths that are often not optimal or wholly inaccurate given the target and this generally happens when I have nodes that are not path able, and I am not quite sure what I am doing wrong right now. If someone could help me correct this I would appreciate it greatly. Some Notes My OpenSet is essentially a Priority Queue, so thats how I sort my nodes by cost. Here is that function function insertIntoPQ (iNode:node, pq:Array) { var inserted:Boolean=true; var iterater:int=0; while (inserted) { if (iterater==pq.length) { pq.push (iNode); inserted=false; } else if (pq[iterater].f_score >= iNode.f_score) { pq.splice (iterater,0,iNode); inserted=false; } ++iterater; } } Thanks!

    Read the article

  • Please help fix and optimize this query

    - by user607217
    I am working on a system to find potential duplicates in our customers table (SQL 2005). I am using the built-in SOUNDEX value that our software computes when customers are added/updated, but I also implemented the double metaphone algorithm for better matching. This is the most-nested query I have created, and I can't help but think there is a better way to do it and I'd like to learn. In the inner-most query I am joining the customer table to the metaphone table I created, then finding customers that have identical pKey (primary phonetic key). I take that, union that with customers that have matching soundex values, and then proceed to score those matches with various text similarity functions. This is currently working, but I would also like to add a union of customers whose aKey (alternate phonetic key) match. This would be identical to "QUERY A" except to substitute on (c1Akey = c2Akey) for the join. However, when I attempt to include that, I get errors when I try to execute my query. Here is the code: --Create aggregate ranking select c1Name, c2Name, nDiff, c1Addr, c2Addr, aDiff, c1SSN, c2SSN, sDiff, c1DOB, c2DOB, dDiff, nDiff+aDiff+dDiff+sDiff as Score ,(sDiff+dDiff)*1.5 + (nDiff+dDiff)*1.5 + (nDiff+sDiff)*1.5 + aDiff *.5 + nDiff *.5 as [Rank] FROM ( --Create match scores for different fields SELECT c1Name, c2Name, c1Addr, c2Addr, c1SSN, c2SSN, c1LTD, c2LTD, c1DOB, c2DOB, dbo.Jaro(c1name, c2name) AS nDiff, dbo.JaroWinkler(c1addr, c2addr) AS aDiff, CASE WHEN c1dob = '1901-01-01' OR c2dob = '1901-01-01' OR c1dob = '1800-01-01' OR c2dob = '1800-01-01' THEN .5 ELSE dbo.SmithWaterman(c1dob, c2dob) END AS dDiff, CASE WHEN c1ssn = '000-00-0000' OR c2ssn = '000-00-0000' THEN .5 ELSE dbo.Jaro(c1ssn, c2ssn) END AS sDiff FROM -- Generate list of possible matches based on multiple phonetic matching fields ( select * from -- List of similar names from pKey field of ##Metaphone table --QUERY A BEGIN (select customers.custno as c1Custno, name as c1Name, haddr as c1Addr, ssn as c1SSN, lasttripdate as c1LTD, dob as c1DOB, soundex as c1Soundex, pkey as c1Pkey, akey as c1Akey from Customers WITH (nolock) join ##Metaphone on customers.custno = ##Metaphone.custno) as c1 JOIN (select customers.custno as c2Custno, name as c2Name, haddr as c2Addr, ssn as c2SSN, lasttripdate as c2LTD, dob as c2DOB, soundex as c2Soundex, pkey as c2Pkey, akey as c2Akey from Customers with (nolock) join ##Metaphone on customers.custno = ##Metaphone.custno) as c2 on (c1Pkey = c2Pkey) and (c1Custno < c2Custno) WHERE (c1Name <> 'PARENT, GUARDIAN') and c1soundex != c2soundex --QUERY A END union --List of similar names from pregenerated SOUNDEX field (select t1.custno, t1.name, t1.haddr, t1.ssn, t1.lasttripdate, t1.dob, t1.[soundex], 0, 0, t2.custno, t2.name, t2.haddr, t2.ssn, t2.lasttripdate, t2.dob, t2.[soundex], 0, 0 from Customers t1 WITH (nolock) join customers t2 with (nolock) on t1.[soundex] = t2.[soundex] and t1.custno < t2.custno where (t1.name <> 'PARENT, GUARDIAN')) ) as a ) as b where (sDiff+dDiff)*1.5 + (nDiff+dDiff)*1.5 + (nDiff+sDiff)*1.5 + aDiff *.5 + nDiff *.5 >= 7.5 order by [rank] desc, score desc Previously, I was using joins such as on c1.pkey = c2.pkey or c1.akey = c2.akey or c1.soundex = c2.soundex but the performance was horrendous, and using unions seems to be working a lot better. Out of 103K customers, tt is currently generating a list of 8.5M potential matches (based on the phonetic codes) in 2.25 minutes, and then taking another 2 to score, rank and filter those down to about 3000. So I am happy with the performance, I just can't help but think there is a better way to structure this, and I need help adding the extra union condition. Thanks!

    Read the article

  • Running game, leaving game and continuing animation

    - by Madrusec
    I have been trying to learn some Actionscript recently and have been trying to run an interactive story that at one point turns into an extremel simple shooter game. After the player either wins or looses, then he/she is taken to the rest of the animated story. So I have everything up to the point where the games runs (successfully) but for some reason I am unable to have flash run the rest of the frames, most of which have no code at all. This is the code for scene 1: stop (); import flash.display.MovieClip; import flash.events.MouseEvent; import flash.utils.Timer; import flash.events.TimerEvent; var stoneInGame:uint; var stoneMaker: Timer; var container_mc: MovieClip; var cursor:MovieClip; var score:int; var anxiety:int; var anxiety_mc :MovieClip = new mcAnxiety(); //stage.addChild( anxiety_mc ); function initializeGame():void { stoneInGame = 10; stoneMaker = new Timer(1000, stoneInGame); container_mc = new MovieClip(); addChild(container_mc); container_mc.addChild(anxiety_mc); anxiety_mc.x = 497; anxiety_mc.y = 360; stoneMaker.addEventListener(TimerEvent.TIMER, createStones); stoneMaker.start(); cursor = new Cursor(); addChild(cursor); cursor.enabled = false; Mouse.hide(); stage.addEventListener(MouseEvent.MOUSE_MOVE, dragCursor); score = 0; anxiety = anxiety_mc.totalFrames; anxiety_mc.gotoAndStop(anxiety); } function dragCursor(event:MouseEvent):void { cursor.x = this.mouseX; cursor.y = this.mouseY; } function createStones(event:TimerEvent):void { var stone:MovieClip; stone = new Stone(); stone.x = Math.random() * stage.stageWidth; stone.y = Math.random() * stage.stageHeight; container_mc.addChild(stone); } function increaseScore():void { score ++; if(score >= stoneInGame) { dragCursor.stop(); createStones.stop(); stoneMaker.stop(); trace("you wind!"); } } function decreaseAnxiety():void { anxiety--; if(anxiety <= 0) { stoneMaker.stop(); trace("you lose!"); } else { anxiety_mc.gotoAndStop(anxiety); } increaseScore(); } initializeGame(); So what I tried to do was adding gotoAndPlay() inside both the decreaseAnxiety and increaseScore functions after the trace statements and referenced a frame where I have more keyframes that continue a story. However, Flash just goes back to the beginning of the timeline and I even the functions that change and control the cursor seem to be running. This leads me to believe that I need to make sure that I tell flash o stup running certain functions before jumping to another frame. However, it seems to me that I would still have the same issue and not be able to continue in the timeline. Is there something I am missing? How can I jump out of all this code once the game finishes and simply continue playing the rest of the frames? Any pointers would be greatly appreciated. Thank you

    Read the article

  • Objective-C vs JavaScript loop performance

    - by micadelli
    I have a PhoneGap mobile application that I need to generate an array of match combinations. In JavaScript side, the code hanged pretty soon when the array of which the combinations are generated from got a bit bigger. So, I thought I'll make a plugin to generate the combinations, passing the array of javascript objects to native side and loop it there. To my surprise the following codes executes in 150 ms (JavaScript) whereas in native side (Objective-C) it takes ~1000 ms. Does anyone know any tips for speeding up those executing times? When players exceeds 10, i.e. the length of the array of teams equals 252 it really gets slow. Those execution times mentioned above are for 10 players / 252 teams. Here's the JavaScript code: for (i = 0; i < GAME.teams.length; i += 1) { for (j = i + 1; j < GAME.teams.length; j += 1) { t1 = GAME.teams[i]; t2 = GAME.teams[j]; if ((t1.mask & t2.mask) === 0) { GAME.matches.push({ Team1: t1, Team2: t2 }); } } } ... and here's the native code: NSArray *teams = [[NSArray alloc] initWithArray: [options objectForKey:@"teams"]]; NSMutableArray *t = [[NSMutableArray alloc] init]; int mask_t1; int mask_t2; for (NSInteger i = 0; i < [teams count]; i++) { for (NSInteger j = i + 1; j < [teams count]; j++) { mask_t1 = [[[teams objectAtIndex:i] objectForKey:@"mask"] intValue]; mask_t2 = [[[teams objectAtIndex:j] objectForKey:@"mask"] intValue]; if ((mask_t1 & mask_t2) == 0) { [t insertObject:[teams objectAtIndex:i] atIndex:0]; [t insertObject:[teams objectAtIndex:j] atIndex:1]; /* NSArray *newCombination = [[NSArray alloc] initWithObjects: [teams objectAtIndex:i], [teams objectAtIndex:j], nil]; */ [combinations addObject:t]; } } } ... the array in question (GAME.teams) looks like this: { count = 2; full = 1; list = ( { index = 0; mask = 1; name = A; score = 0; }, { index = 1; mask = 2; name = B; score = 0; } ); mask = 3; name = A; }, { count = 2; full = 1; list = ( { index = 0; mask = 1; name = A; score = 0; }, { index = 2; mask = 4; name = C; score = 0; } ); mask = 5; name = A; },

    Read the article

  • Oracle Linux Delivers Top CPU Benchmark Results on Sun Blades

    - by sergio.leunissen
    From the Performance and Best Practices blog: Fresh SPEC CPU2006 results for Sun Blade X6275 M2 Server Modules running Oracle Linux 5.5. The highlights: The dual-node Sun Blade X6275 M2 server module, equipped with two Intel Xeon X5670 2.93 GHz processors per node and running the Oracle Enterprise Linux 5.5 operating system delivered the best SPECint_rate2006 and SPECfp_rate2006 benchmark results for all systems with Intel Xeon processor 5000 sequence. With a SPECint_rate2006 benchmark result of 679, the Sun Blade X6275 M2 server module, with two compute nodes per blade, delivers maximum performance for space constrained environments. Comparing Oracle's dual-node blade to HP's dual-node blade server, based on their single node performance, the Sun Blade X6275 M2 server module SPECfp_rate2006 score of 241 outperforms the best published HP ProLiant BL2X220c G5 server score by 3.2x. A single node of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 37% improvement in SPECint_rate2006 benchmark results and 22% improvement in SPECfp_rate2006 benchmark results compared to the previous generation Sun Blade X6275 server module. Both nodes of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 59% improvement on the SPECint_rate2006 benchmark and 40% improvement on the SPECfp_rate2006 benchmark compared to the previous generation Sun Blade X6275 server module.

    Read the article

  • Gnome 3 freezes on logon on samsung RV 509

    - by Noufal
    I have a Samsung NP-RV509 A0FIN and I tried to install GNU/Linux with gnome 3.2 on it. I tried Fedora 16, Ubuntu 11.10 and Linux Mint 12 RC, but with no success. All of these freezes upon login into gnome shell. I think it is the problem with graphics driver, so I tried xorg-edgers ppa on my last installation, ie., Linux Mint. I also tried various intel graphics packages listed on Synaptic package manager, but no success again. My device configuration is as follows(obtained from windows 7): More details about my computer Component Details Subscore Base score Processor Intel(R) Pentium(R) CPU P6200 @ 2.13GHz 5.6 4.6 Memory (RAM) 4.00 GB 7.2 Graphics Intel(R) HD Graphics 4.6 Gaming graphics 1562 MB Total available graphics memory 5.2 Primary hard disk 12GB Free (50GB Total) 5.9 Windows 7 Ultimate System -------------------------------------------------------------------------------- Manufacturer SAMSUNG ELECTRONICS CO., LTD. Model RV409/RV509/RV709 Total amount of system memory 4.00 GB RAM System type 32-bit operating system Number of processor cores 2 64-bit capable Yes Storage -------------------------------------------------------------------------------- Total size of hard disk(s) 418 GB Disk partition (C:) 12 GB Free (50 GB Total) Media drive (D:) CD/DVD Disk partition (E:) 526 MB Free (191 GB Total) Disk partition (F:) 101 GB Free (177 GB Total) Graphics -------------------------------------------------------------------------------- Display adapter type Intel(R) HD Graphics Total available graphics memory 1562 MB Dedicated graphics memory 64 MB Dedicated system memory 0 MB Shared system memory 1498 MB Display adapter driver version 8.15.10.2202 Primary monitor resolution 1366x768 DirectX version DirectX 10 Network -------------------------------------------------------------------------------- Network Adapter Realtek PCIe GBE Family Controller Network Adapter Broadcom 802.11n Network Adapter Network Adapter Microsoft Virtual WiFi Miniport Adapter Notes -------------------------------------------------------------------------------- The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits. Any help is appreciated, and thanks in advance.

    Read the article

  • Solving Kaggle’s Bike Sharing Demand Machine Learning Problem

    - by Gopinath
    Kaggle.com hosts a lot of interesting machine learning problems online and thousands of its members compete to solve them for a bounty. Problems hosted on Kaggle has varying complexity to accomodate newbies to rock star developers – few problems are good enough for  newbies to learn basics of machine learning and few of them challenge the best of machine learning developers. I’m learning basics of machine learning for the past few weeks and had an opportunity to solve Kaggel’s Bike Sharing Demand problem. Bike Sharing systems allows customers to rent a bike (or a cycle as it is called in many part of the world) for several hours and return them back . The problem provides historical information about the demand for bike sharing business and we need to forecast the demand. For more information on the problem, visit Kaggle.com website. Here is the solution I written using random forests algorithm using R programming language and you can download the source code from github.  With this solution I was able to score RMSLE of 0.70117, which placed me somewhere in the mid of the leader board.  This is the best score I could get by spending 4 hours of my time. Please feel free to fork the code and improve it.   Get Kaggle Bike Sharing Demand solution code from GitHub

    Read the article

  • Manager keeps changing requirement specification after every demo.

    - by Jungle Hunter
    Background of my working environment My manager has no background or understanding of computers or software whatsoever. It is highly likely he hasn't seen code in any form (not even from a physical distance of 10 feet or less) in his life. There is no one who understands the complexity of what I am asked to implement. To the point that if I semi-hardcode no one would know. On Joel's test we score an unbelievable score 0. The problems The manager and at times other "senior" keep changing the requirement specification. Changes which, if good engineering be done and not patchy "fixes", require change in the underlying design. There is absolutely no one who looks at code (probably because no one knows how to, or even if it should be done) which means no one will ever be able to: Appreciate the complexity of the problem or the elegance of the solution. Suggest improvement to the approach. Appreciate the quality of the code. Point out where the code can be improved. A lot of jargon is used which makes sense grammatically but fails to make any sense any other way. Doesn't feel, behave or work like a software company. The question What should be done? Especially regarding there being no one who would point out improvements in my code. Update To answer HLGEM's (and possibly others) question about what I've done to try and fix it. I offered to set up Redmine and introduce source control to everyone. I said I would recommend distributed (git or mercurial) but will also talk about centralized ones and let the team decide. Response was that things are being done and will be done within weeks. Haven't seen that nor am I aware if other parts of the company use it.

    Read the article

  • CRM Evolution 2014: Mediocrity is the New Horrible in Customer Service

    - by Tuula Fai
    "Mediocrity is the new horrible in customer service," Blair McHaney, Gold's Gym Almost everyone knows that customers' expectations have risen. But, after listening to two days of presentations at CRM Evolution, I think it’s more accurate to say that customers' expectations have skyrocketed. Fortunately, most companies have gotten the message and are taking their customer service to a higher level. For those who've been hesitant to 'boldly go where their customer service organization has not gone before,' take heart. I’ve got some statistics that will encourage you to take those first few steps. Why should I change? By engaging customers online, ancestry.com achieved a 99.5% customer satisfaction score (CSAT) while improving retention and saving millions on greater efficiency, including a 38%-50% drop in inbound calls and emails.1 By empowering employees to delight customers, Gold’s Gym achieved a 77.5% Net Promoter Score (NPS) and 22% customer churn rate. No small feat when you consider the industry averages are 40% NPS and 45% churn.2 By adapting quickly to social media, brands like Verizon have benefited from social community members spending 2.5x-10x more than average customers.3 ‘The fierce urgency of now’ is upon us in customer service. You can take your customer service to a higher level! To find out more, click here CRM Evolution Customer Service Experience Footnotes: 1. Arvindh Balakrishnan, Is Your Customer Service Modern?2. Blair McHaney, Wire Your Organization with Customer Feedback3. Becky Carroll, The Power of Communities for Improving the Service Experience and Building Advocates

    Read the article

  • Game-a-Week One

    - by Matt Christian
    Anyone who chats with me on a semi-regular basis knows I am absolutely horrible at completing something from beginnning to end.  Often times I'll begin something, lose interest at some point, and end up moving onto the next thing.  For example, I have 1/2 a full game created, 1/3 of a novel written, and half of a model set created.  Needless to say, unless I have some sort of pressure to finish something I don't stick to it. Recently however one of my online buddies challenged me to create a simple game.  The start date was last Thursday and the final game needed to be delivered by this next Sunday (giving me just over a week).  However, I am going out of town this Friday so will need to deliver it by Thursday, giving me exactly 1 week to develop a game.  Here is what the game needed to include: The player should be able to shoot Shooting things should score points Sounds very simple, but given a single week to produce all art assets plus the game isn't an easy task.  So far I've developed: An animated Main Menu that loads via script files, allows the user to start a new game or exit the game The game is 3D and the player can move around the play area with an 'over-the-shoulder' camera HUD elements are drawn to display the player's current score When the player presses Esc they are shown a pause menu where they can resume the game by pressing Esc again, or quit the game by pressing Space There are also 2 items implemented that don't work perfectly: JigLibX physics library implementation On the main menu there is an arrow symbol that rotates to always point at your mouse I've got 2 days of development left so hopefully I can get collision working, some of the art cleaned up, and some more of the camera functionality working.  Also, I'll need to take some time to package the game up which hopefully shouldn't take too long.

    Read the article

  • Security Alert for CVE-2010-0886 and CVE-2010-0887 Released

    - by eric.maurice
    Hi, this is Eric Maurice again! Oracle just released a Security Alert to announce the availability of fixes for two vulnerabilities (CVE-2010-0886 and CVE-2010-0887) affecting Oracle Java SE and Oracle Java For Business. Both vulnerabilities only affect Java when running in a 32-bit web browser. These vulnerabilities are not present in Java running on servers or standalone Java desktop applications and do not impact any Oracle server based software. The first vulnerability (CVE-2010-0886) affects the Java Deployment Toolkit (version 6 update 10 through 19) on Windows only. The second vulnerability (CVE-2010-0887) affects the Java Plug-in (version 6 update 18 and 19) on Windows, Solaris and Linux. Both vulnerabilities may allow an attacker to run commands on the user's system with the privileges of the user, whose system may have become compromised by visiting a malicious web site. Oracle rated the severity of both vulnerabilities with a CVSS Base Score of 10.0 because many Windows users grant themselves administrative privileges. However, on other platforms, or for Windows users with limited privileges, the CVSS Base Score is only 7.5, because a successful exploitation of these vulnerabilities cannot result in a full compromise of the affected system. Users can quickly determine if they are running vulnerable versions of Java by pointing their browser to http://www.java.com/en/download/help/testvm.xml. Java SE users can visit http://www.java.com and download the most recent release of Java SE to address these vulnerabilities. Because of the criticality of these vulnerabilities, and the publicity they received as a result of their disclosure before the availability of a fix, Oracle recommends that all customers and Java users update their Java installation to the most recent version (6 update 20). For More Information: The advisory for the Security Alert for CVE-2010-0886 and CVE-2010-0887 is located at http://www.oracle.com/technology/deploy/security/alerts/alert-cve-2010-0886.html

    Read the article

  • How To Scale Canvas In Android

    - by Daniel Braithwaite
    I am writing a android game using Canvas as the way to draw everything, the problem is that when i run it on different android phones the canvas dosn't change size i tried using canvas.scale() but that didn't make a i difference. The code i use for drawing is ... public void draw( Canvas c, int score ) { Obstical2[] obstmp = Queue.toArray(this.o); Coin[] cointmp = QueueC.toArray(this.c); for( int i = 0; i < obstmp.length; i++ ) { obstmp[i].draw(c); } for( int i = 0; i < cointmp.length; i++ ) { cointmp[i].draw(c); } c.drawText(String.format("%d", score ), 20, 50, textPaint); if( isWon && isStarted ) c.drawText("YOU WON", 20, 400, resPaint); else if( isLost && isStarted ) c.drawText("YOU LOST", 20, 400, resPaint); } The function above calls the draw functions for the entity's on the screen, theses function are as follows Draw Function For Obstical : public void draw( Canvas c ) { Log.i("D", "COIN"); coin.draw(c); } Draw Function For Coin : public void draw( Canvas c ) { obstical.draw(c); } How could i make the canvas re-size to it would look the same on any screen ? Cheers Daniel

    Read the article

  • Doing a passable 4X game AI

    - by Extrakun
    I am coding a rather "simple" 4X game (if a 4X game can be simple). It's indie in scope, and I am wondering if there's anyway to come up with a passable AI without having me spending months coding on it. The game has three major decision making portions; spending of production points, spending of movement points and spending of tech points (basically there are 3 different 'currency', currency unspent at end of turn is not saved) Spend Production Points Upgrade a planet (increase its tech and production) Build ships (3 types) Move ships from planets to planets (costing Movement Points) Move to attack Move to fortify Research Tech (can partially research a tech i.e, as in Master of Orion) The plan for me right now is a brute force approach. There are basically 4 broad options for the player - Upgrade planet(s) to its his production and tech output Conquer as many planets as possible Secure as many planets as possible Get to a certain tech as soon as possible For each decision, I will iterate through the possible options and come up with a score; and then the AI will choose the decision with the highest score. Right now I have no idea how to 'mix decisions'. That is, for example, the AI wishes to upgrade and conquer planets at the same time. I suppose I can have another logic which do a brute force optimization on a combination of those 4 decisions.... At least, that's my plan if I can't think of anything better. Is there any faster way to make a passable AI? I don't need a very good one, to rival Deep Blue or such, just something that has the illusion of intelligence. This is my first time doing an AI on this scale, so I dare not try something too grand too. So far I have experiences with FSM, DFS, BFS and A*

    Read the article

  • Snake Game Help

    - by MuhammadA
    I am making a snake game and learning XNA at the same time. I have 3 classes : Game.cs, Snake.cs and Apple.cs My problem is more of a conceptual problem, I want to know which class is really responsible for ... detecting collision of snake head on apple/itself/wall? which class should increase the snakes speed, size? It seems to me that however much I try and put the snake stuff into snake.cs that game.cs has to know a lot about the snake, like : -- I want to increase the score depending on size of snake, the score variable is inside game.cs, which means now I have to ask the snake its size on every hit of the apple... seems a bit unclean all this highly coupled code. or -- I DO NOT want to place the apple under the snake... now the apple suddenly has to know about all the snake parts, my head hurts when I think of that. Maybe there should be some sort of AppleLayer.cs class that should know about the snake... Whats the best approach in such a simple scenario? Any tips welcome. Game.cs : using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; using Microsoft.Xna.Framework.Design; namespace Snakez { public enum CurrentGameState { Playing, Paused, NotPlaying } public class Game1 : Microsoft.Xna.Framework.Game { private GraphicsDeviceManager _graphics; private SpriteBatch _spriteBatch; private readonly Color _niceGreenColour = new Color(167, 255, 124); private KeyboardState _oldKeyboardState; private SpriteFont _scoreFont; private SoundEffect _biteSound, _crashSound; private Vector2 _scoreLocation = new Vector2(10, 10); private Apple _apple; private Snake _snake; private int _score = 0; private int _speed = 1; public Game1() { _graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { _spriteBatch = new SpriteBatch(GraphicsDevice); _scoreFont = Content.Load<SpriteFont>("Score"); _apple = new Apple(800, 480, Content.Load<Texture2D>("Apple")); _snake = new Snake(Content.Load<Texture2D>("BodyBlock")); _biteSound = Content.Load<SoundEffect>("Bite"); _crashSound = Content.Load<SoundEffect>("Crash"); } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { Content.Unload(); } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { KeyboardState newKeyboardState = Keyboard.GetState(); if (newKeyboardState.IsKeyDown(Keys.Escape)) { this.Exit(); // Allows the game to exit } else if (newKeyboardState.IsKeyDown(Keys.Up) && !_oldKeyboardState.IsKeyDown(Keys.Up)) { _snake.SetDirection(Direction.Up); } else if (newKeyboardState.IsKeyDown(Keys.Down) && !_oldKeyboardState.IsKeyDown(Keys.Down)) { _snake.SetDirection(Direction.Down); } else if (newKeyboardState.IsKeyDown(Keys.Left) && !_oldKeyboardState.IsKeyDown(Keys.Left)) { _snake.SetDirection(Direction.Left); } else if (newKeyboardState.IsKeyDown(Keys.Right) && !_oldKeyboardState.IsKeyDown(Keys.Right)) { _snake.SetDirection(Direction.Right); } _oldKeyboardState = newKeyboardState; _snake.Update(); if (_snake.IsEating(_apple)) { _biteSound.Play(); _score += 10; _apple.Place(); } base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(_niceGreenColour); float frameRate = 1 / (float)gameTime.ElapsedGameTime.TotalSeconds; _spriteBatch.Begin(); _spriteBatch.DrawString(_scoreFont, "Score : " + _score, _scoreLocation, Color.Red); _apple.Draw(_spriteBatch); _snake.Draw(_spriteBatch); _spriteBatch.End(); base.Draw(gameTime); } } } Snake.cs : using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework; namespace Snakez { public enum Direction { Up, Down, Left, Right } public class Snake { private List<Rectangle> _parts; private readonly Texture2D _bodyBlock; private readonly int _startX = 160; private readonly int _startY = 120; private int _moveDelay = 100; private DateTime _lastUpdatedAt; private Direction _direction; private Rectangle _lastTail; public Snake(Texture2D bodyBlock) { _bodyBlock = bodyBlock; _parts = new List<Rectangle>(); _parts.Add(new Rectangle(_startX, _startY, _bodyBlock.Width, _bodyBlock.Height)); _parts.Add(new Rectangle(_startX + bodyBlock.Width, _startY, _bodyBlock.Width, _bodyBlock.Height)); _parts.Add(new Rectangle(_startX + (bodyBlock.Width) * 2, _startY, _bodyBlock.Width, _bodyBlock.Height)); _parts.Add(new Rectangle(_startX + (bodyBlock.Width) * 3, _startY, _bodyBlock.Width, _bodyBlock.Height)); _direction = Direction.Right; _lastUpdatedAt = DateTime.Now; } public void Draw(SpriteBatch spriteBatch) { foreach (var p in _parts) { spriteBatch.Draw(_bodyBlock, new Vector2(p.X, p.Y), Color.White); } } public void Update() { if (DateTime.Now.Subtract(_lastUpdatedAt).TotalMilliseconds > _moveDelay) { //DateTime.Now.Ticks _lastTail = _parts.First(); _parts.Remove(_lastTail); /* add new head in right direction */ var lastHead = _parts.Last(); var newHead = new Rectangle(0, 0, _bodyBlock.Width, _bodyBlock.Height); switch (_direction) { case Direction.Up: newHead.X = lastHead.X; newHead.Y = lastHead.Y - _bodyBlock.Width; break; case Direction.Down: newHead.X = lastHead.X; newHead.Y = lastHead.Y + _bodyBlock.Width; break; case Direction.Left: newHead.X = lastHead.X - _bodyBlock.Width; newHead.Y = lastHead.Y; break; case Direction.Right: newHead.X = lastHead.X + _bodyBlock.Width; newHead.Y = lastHead.Y; break; } _parts.Add(newHead); _lastUpdatedAt = DateTime.Now; } } public void SetDirection(Direction newDirection) { if (_direction == Direction.Up && newDirection == Direction.Down) { return; } else if (_direction == Direction.Down && newDirection == Direction.Up) { return; } else if (_direction == Direction.Left && newDirection == Direction.Right) { return; } else if (_direction == Direction.Right && newDirection == Direction.Left) { return; } _direction = newDirection; } public bool IsEating(Apple apple) { if (_parts.Last().Intersects(apple.Location)) { GrowBiggerAndFaster(); return true; } return false; } private void GrowBiggerAndFaster() { _parts.Insert(0, _lastTail); _moveDelay -= (_moveDelay / 100)*2; } } } Apple.cs : using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework; namespace Snakez { public class Apple { private readonly int _maxWidth, _maxHeight; private readonly Texture2D _texture; private readonly Random random = new Random(); public Rectangle Location { get; private set; } public Apple(int screenWidth, int screenHeight, Texture2D texture) { _maxWidth = (screenWidth + 1) - texture.Width; _maxHeight = (screenHeight + 1) - texture.Height; _texture = texture; Place(); } public void Place() { Location = GetRandomLocation(_maxWidth, _maxHeight); } private Rectangle GetRandomLocation(int maxWidth, int maxHeight) { // x and y -- multiple of 20 int x = random.Next(1, maxWidth); var leftOver = x % 20; x = x - leftOver; int y = random.Next(1, maxHeight); leftOver = y % 20; y = y - leftOver; return new Rectangle(x, y, _texture.Width, _texture.Height); } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw(_texture, Location, Color.White); } } }

    Read the article

  • Change collision action

    - by PatrickR
    I have a collision detection and its working fine, the problem is, that whenever my "bird" is hitting a "cloud", the cloud dissapers and i get some points. The same happens for the "sol" which it should, but not with the clouds. How can this be changed ? ive tryed a lot, but can seem to figger it out. Collision Code - (void)update:(ccTime)dt { bird.position = ccpAdd(bird.position, skyVelocity); NSMutableArray *projectilesToDelete = [[NSMutableArray alloc] init]; for (CCSprite *bird in _projectiles) { bird.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(bird.position.x, bird.position.y, [bird boundingBox].size.width, [bird boundingBox].size.height); NSMutableArray *targetsToDelete = [[NSMutableArray alloc] init]; for (CCSprite *cloudSprite in _targets) { cloudSprite.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(cloudSprite.position.x, cloudSprite.position.y, [cloudSprite boundingBox].size.width, [cloudSprite boundingBox].size.height); if (CGRectIntersectsRect([bird boundingBox], [cloudSprite boundingBox])) { [targetsToDelete addObject:cloudSprite]; } } for (CCSprite *solSprite in _targets) { solSprite.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(solSprite.position.x, solSprite.position.y, [solSprite boundingBox].size.width, [solSprite boundingBox].size.height); if (CGRectIntersectsRect([bird boundingBox], [solSprite boundingBox])) { [targetsToDelete addObject:solSprite]; score += 50/2; [scoreLabel setString:[NSString stringWithFormat:@"%d", score]]; } } // NÅR SKYEN BLIVER RAMT AF FUGLEN for (CCSprite *cloudSprite in targetsToDelete) { //[_targets removeObject:cloudSprite]; //[self removeChild:cloudSprite cleanup:YES]; } // NÅR SOLEN BLIVER RAMT AF FUGLEN for (CCSprite *solSprite in targetsToDelete) { [_targets removeObject:solSprite]; [self removeChild:solSprite cleanup:YES]; } if (targetsToDelete.count > 0) { [projectilesToDelete addObject:bird]; } [targetsToDelete release]; } // NÅR FUGLEN BLIVER RAMT AF ALT ANDET for (CCSprite *bird in projectilesToDelete) { //[_projectiles removeObject:bird]; //[self removeChild:bird cleanup:YES]; } [projectilesToDelete release]; }

    Read the article

  • Remove enemy when bullet hits enemy

    - by jordi12100
    For my education I have to make a basic game in HTML5 canvas. The game is a shooter game. When you can move left - right and space is shoot. When I shoot the bullets will move up. The enemy moves down. When the bullet hits the enemy the enemy has to dissapear and it will gain +1 score. But the enemy will dissapear after it comes up the screen. Demo: http://jordikroon.nl/test.html space = shoot + enemy shows up This is my code: for (i=0;i<enemyX.length;i++) { if(enemyX[i] > canvas.height) { enemyY.splice(i,1); enemyX.splice(i,1); } else { enemyY[i] += 5; moveEnemy(enemyX[i],enemyY[i]); } } for (i=0;i<bulletX.length;i++) { if(bulletY[i] < 0) { bulletY.splice(i,1); bulletX.splice(i,1); } else { bulletY[i] -= 5; moveBullet(bulletX[i],bulletY[i]); for (ib=0;ib<enemyX.length;ib++) { if(bulletX[i] + 50 < enemyX[ib] || enemyX[ib] + 50 < bulletX[i] || bulletY[i] + 50 < enemyY[ib] || enemyY[ib] + 50 < bulletY[i]) { ++score; enemyY.splice(i,1); enemyX.splice(i,1); } } } } Objects: function moveBullet(posX,posY) { //console.log(posY); ctx.arc(posX, (posY-150), 10, 0 , 2 * Math.PI, false); } function moveEnemy(posX,posY) { ctx.rect(posX, posY, 50, 50); ctx.fillStyle = '#ffffff'; ctx.fill(); }

    Read the article

  • Splitting a tetris game apart - where to put time-management?

    - by nightcracker
    I am creating a tetris game in C++ & SDL, and I'm trying to do it "good" by making it object-oriented and keeping scopes small. So far I have the following structure: A main with some lowlevel SDL set up and handling input A game class that keeps track of score and provides the interface for main (move block down, etc) A map class that keeps track of the current game field, which blocks are where. Used by the game class. A block class that consists of the current falling block, used by game. A renderer class abstracting low level SDL to a format where you render "tetris blocks". Used by map and block. Now I have a though time where to place the time-management of this game. For example, where should be decided when a block bumps the bottom of the screen how long it takes the current block locks in place and a new block spawns? I also have an other unrelated question, is there some place where you can find some standard data on tetris like standard score tables, rulesets, timings, etc?

    Read the article

  • Can I improve my AdWords quality scores with better landing pages?

    - by Eric
    I noticed that I have some keywords in my AdWords that are totally applicable to my site but the quality score of the keyword is 4 or 5. I'd like to get it up higher by creating custom versions of my site's home page (landing page) targeted specifically for people searching on those keywords. So for example, if we pretend my site sells pet food, my current home page has the phrase "dog food." I have a specific AdWords campaign for people searching on cat food (with cat food-specific ads). I'm thinking about changing the URL on those ads to something like http://mysite.com/cat.html, so a different home page comes up with the phrase "cat food." My thinking is that will help Google see that this new landing page is appropriate for the keywords and will raise my quality score for the "cat food" keywords. (Note that none of what I'm doing is shady or misleading; nobody would disagree that all of the keywords and ads I've created are perfect and appropriate for what my site offers.) Question: is what I describe the correct way to raise poor quality scores on keywords, and will it help?

    Read the article

  • Adding delay between damage

    - by iQue
    I have a bunch of enemies chasing my main-character, and if they intersect I want them to damage him and that's all good. The problem is that right now they damage him as long as they stand around him, every frame! and since it gets called every frame my character's HP reaches 0 almost instantly. I've tried adding delay and I've tried a timertask, but can't get it to work. This is the code I use to check for intersection: private void checkCollision(Canvas canvas) { synchronized (getHolder()) { Rect h1 = happy.getBounds(); for (int i = 0; i < enemies.size(); i++) { for (int j = 0; j < bullets.size(); j++) { Rect b1 = bullets.get(j).getBounds(); Rect e1 = enemies.get(i).getBounds(); if (b1.intersect(e1)) { enemies.get(i).damageHP(5); bullets.remove(j); } if(e1.intersect(h1)){ happy.damageHP(5); // this is the statement that needs some sort of delay, I want them to damage him every 2 seconds they intersect him. } if(enemies.get(i).getHP() <= 0){ enemies.get(i).death(canvas, enemies); score.incScore(5); break; } if(happy.getHP() <= 0){ score.incScore(-50); //end-screen } } } } } If anyone knows the logic to do this please do tell.

    Read the article

  • Conventions for search result scoring

    - by DeaconDesperado
    I assume this type of question is more on-topic here than on regular SO. I have been working on a search feature for my team's web application and have had a lot of success building a multithreaded, "divide and conquer" processing system to work through a large amount of fulltext. Our problem domain is pretty specific. Users of the app generate posts, and as a general rule, posts that are more recent are considered to be of greater relevance. Some of the data we are trying to extract from search is very specific (user's feelings about specific items or things) and we are using python nltk to do named-entity extraction to find interesting likely query terms. Essentially we look for descriptive adjective-noun pairs and generate a general picture of a user's expressed sentiment as a list of tokens. This search is intended as an internal tool for our team to draw out a local picture of sentiments like "soggy pizza." There's some machine learning in there too to do entity resolution on terms like "soggy" to all manner of adjectives expressing nastiness. My problem is I am at a loss for how to go about scoring these results. The text being searched is split up into tokens in a list, so my initial approach would be to normalize a float score between 0.0-1.0 generated off of how far into the list the terms appear and how often they are repeated (a later mention of the term being worth less, earlier more, greater frequency-greater score, etc.) A certain amount of weight could be given to the timestamp as well, though I am not certain how to calculate this. I am curious if anyone has had to solve a similar problem in a search relevance grading between appreciable metrics (frequency, term location/colocation, recency) and if there are and guidelines for how to weight each. I should mention as well that the final fallback procedure in the search is to pipe the query to Sphinx, which has its own scoring practices. Sphinx operates as the last resort in case our application specific processing can't find any eligible candidates.

    Read the article

  • Splitting a tetris game apart - where to put time-management?

    - by nightcracker
    I am creating a tetris game in C++ & SDL, and I'm trying to do it "good" by making it object-oriented and keeping scopes small. So far I have the following structure: A main with some lowlevel SDL set up and handling input A game class that keeps track of score and provides the interface for main (move block down, etc) A map class that keeps track of the current game field, which blocks are where. Used by the game class. A block class that consists of the current falling block, used by game. A renderer class abstracting low level SDL to a format where you render "tetris blocks". Used by map and block. Now I have a though time where to place the time-management of this game. For example, where should be decided when a block bumps the bottom of the screen how long it takes the current block locks in place and a new block spawns? I also have an other unrelated question, is there some place where you can find some standard data on tetris like standard score tables, rulesets, timings, etc?

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >