Search Results

Search found 14185 results on 568 pages for 'cd drive'.

Page 28/568 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• Mount drive at /Volumes/NAME/ or similar in Cygwin

  - by Adam

  Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

  Read the article

• All items in my pen drive had been renamed automatically and cannot open it

  - by pabz

  All the items (both files and folders) inside my pen drive had been renamed to some characters like :]h.¡?.A++ and when I try to open any folder Windows gives this message. The filename,directory name, or volume label syntax is incorrect I was told that it is a problem of the pen drive, not a virus. They say if I format the pendrive then I will be able to use it again normally. But I'm not sure. And I need those files. Does anybody knows a solution?

  Read the article

• Corrupted files, hard drive test?

  - by all-R

  Hi guys, I'm currently on a macbook with a 1TB external hard drive connected trough a USB hub wich is connected on my macbook. The problem is, my disk, wich is partitioned in 2 (one HFS+ and one NTFS) keeps getting corrupted, recently it was my HFS+ partition, I could not repair it using the Apple's Disk utility, but was able to backup my files. Is it synonym that my hard drive is failing? Is it because of my USB hub? I also keep all my iTunes library on my external HD (HFS+ partition), and did a lot of transfer lately, adding files, removing etc. the last time, my partition got corrupted after a lot of deleted items. If anybody has an idea of what to check first, what could cause the problem, I would appreciate it :) Thanks!

  Read the article

• Defrag/TRIM settings for hybrid hard drive?

  - by Joel Coehoorn

  I recently acquired a momentus XT hybrid hard drive. This is a tradition spinning HDD with a small SSD portion for frequently used files. Normally, you are not supposed to defrag SSDs, as it does not help performance and can significantly reduce the life of the drive. But you do need to defrag an HDD to keep good performance. So where does that leave us for hybrid drives? Do I need to turn off defragging in Windows to preserve the SSD portion? Is the on-disk controller smart enough to handle defragging correctly? Is there some utility I need to set it up that I missed? Additionally, for SSDs you normally want to check for and enable TRIM support... but this makes no sense for a HDDs. Where does that leave us for hybrid drives? Should I try to enable TRIM or not?

  Read the article

• Dead USB flash drive

  - by Unsliced

  So a friend has come to me with a problem. They have a dead USB thumb drive which no longer responds when plugged into a machine. I've tried it in a Mac and it doesn't even respond, at least on a Windows XP machine it sees that it is there but can't show it in explorer, just that whatever is plugged in has malfunctioned. There is obviously current because the activity light on the drive illuminates. I'm looking for suggestions, please. I have access to Mac or Windows hardware and am happy to experiment (and even to pay if the solution works!) It's a bit late to recommend regular backups, but in the lack of that, what's the next best forensic advice? Edit: I should stress that, if possible, we're trying to rescue the data, after all, thumb drives are basically disposable and hardly worth the bother if there's no emotional or functional reason for wanting to rescue it!

  Read the article

• Most efficient hard drive configuration for multitasking system

  - by user99391

  I hope I didn’t screw up the tile. Currently I’m using for my system 2x500g Raid0 system. I’m thinking about an upgrade but I got hold up by few questions. I need at least 100-120 gb for my system and apps and looking for a technological upgrade also. I've end up with 3 choices. Single 120 ssd (sata 6 drive) 2x60 ssd drives, but I've heard it's not possible. PCI ssd drive (~120gb). They all have very similar read/write values and prices but I was wondering if anyone could give some tips on which way to go. I run win7x64 and do a lot of multitasking(especially adobe stuff).

  Read the article

• Mount drive at /Volumes/NAME/ or similar in Cygwin

  - by Adam

  Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

  Read the article

• Time Machine/iMac loses all trace of external hard drive after a few days

  - by Bill

  Hey guys, First time posting, also a Mac newbie (recent windows convert) so I'm hoping I can get some help here :) I have a Hitachi Deskstar drive in an external casing that I got from ebuyer. (its one of those unknown fairly cheapish enclosures) connected via firewire. I hook it up and it works fine, but then at some point over the next week or so I'll realise that my last update was 3 days ago or so. At this point the Mac will not recognise the drive as existing and the only thing to do is switch off and on the external enclosure. It then works fine for a while. If I had to guess I'm assuming its powering down or something when the Mac goes into standby? Is there anyway to solve this?

  Read the article

• Move hibernate file to a different drive

  - by Kamarey

  Is it possible to move a Windows hibernate file to a different drive? E.g. if I have Windows installed on C, I want it's hibernate file be on D. Eee... just thought that I wanted to ask this question about hibernate file, not the page file. Don't know where the page file came from. Sorry:) So the question is about hibernate file. But no problems with all answers about page file. (Edit: The original question title was "Move page file to a different drive")

  Read the article

• How To Rip an Audio CD to FLAC with Foobar2000

  - by Mysticgeek

  Foobar2000 is a great audio player that is fully customizable, is light on system resources, and contains a lot of tools and features. Today we show you how to use it to rip an audio CD to FLAC format. Note: For this tutorial we’re going to assume this is the first time you’re ripping a disc with Foobar2000. We’re running it on Windows 7 Ultimate 64-bit. Install Foobar2000 and FLAC First download and install Foobar2000 (link below). The main thing you’ll want to make sure to enable during the install process is Audio CD Support… And the freedb Tagger which are located under Optional Features, then continue through the rest of the install wizard. Next you need to install the latest version of the FLAC codec (link below) following the defaults. Rip Audio CD To rip a CD, place it in your CDROM drive, launch Foobar2000 and click File \ Open Audio CD. Select the appropriate CD drive and click the Rip button. Next you’ll want to lookup the disc information with freedb…or you can manually enter in the track data if it’s a custom disc. Select the proper tag information in the freedb tagger window, then click Update files. The data will be entered in, make sure the radio button next to Go to the Converter Setup dialog is selected, and click the Rip button. In the Converter Setup screen, here you can select the output format, where in our case we’re selecting FLAC. In this window you can choose several other options like the output path, merging the tracks into one or individual files…etc. When you have those settings completed click OK. Next you’ll need to find flac.exe which is located wherever you installed it. On our 64-bit Windows 7 system the default path is C:\Program Files (x86)\FLAC Now wait while your CD is ripped and converted to FLAC. You’ll get a Converter Status Report…after you’ve checked it over you can close out of it. If you set the option to show the output files after conversion you can take a look, make sure all tracks were converted, and play them right away if you want. You can play the tracks in Foobar2000 or any player that supports FLAC. If you want to use WMC or WMP see our article on how to play FLAC files in Windows 7 Media Center or Player. That’s all there is to it! If you’re a fan of Foobar2000 and enjoy your music converted to FLAC format, Foobar2000 does the job quite well. There are a lot of customizations and tools you can use in Foobar2000 that we’ll be taking a look at in future articles. For more information check out our look at this fully customizable music player. Foobar2000 run on XP, Vista, and Windows 7 Links Download Foobar2000 Download FLAC Similar Articles Productive Geek Tips Using Ubuntu: What Package Did This File Come From?Easily Change Audio File Formats with XRECODEFoobar2000 is a Fully Customizable Music PlayerConvert Virtually Any Audio Format with XRECODE IIExtract Audio from a Video File with Pazera Free Audio Extractor TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook

  Read the article

• AVG Rescue CD : détecter des virus sans recourir à votre OS, Par Poinsot Benjamin

  Bonjour, je partage avec vous aujourd'hui mon dernier article en date, à savoir AVG Rescue CD : détecter des virus sans recourir à votre OS. Vous pouvez le consulter à cette adresse : http://bpoinsot.developpez.com/tutor...avg-rescue-cd/. Synopsis : Citation: AVG Rescue CD offre la possibilité de réaliser un scan antivirus de votre ordinateur depuis une distribution Linux de type LiveCD. Ainsi, vous profitez de la...

  Read the article

• Unable to boot ubuntu 11.10 from external usb drive

  - by user45006

  I'm new to Ubuntu (and actually all things Linux) as of this morning, so please excuse any stupid mistakes I may be making. I recently bought an external hard drive for my newly built PC (that is running windows 7 if it matters). I would like to install Ubuntu onto the external drive and boot from there. I downloaded Ubuntu 11.10 and made a bootable cd, unplugged my internal HDDs, plugged in the external drive, installed Ubuntu 11.10 on the external drive via the installer, and replugged in my internal HDDs. Then I set my bios boot order to: Boot from USB-HDD - Boot from Hard Disk - Boot from CD/DVD. Now when I restart I get the message "Starting Operating System..." (or something like that, I forget exactly what it says) that lingers on the screen for a moment and then windows starts. Any idea what the problem may be? ~Relevant info~ BIOS version: Award Software International, Inc. F2, 2/22/2011 Ubuntu Version: 11.10 External Hard Drive: Western Digital My Passport Essential 500GB Portable Hard Drive (Black) ~Things I've already tried~ 1) Unplug internal HDDs so that only external drive was plugged in via usb. Same thing happened only obviously my BIOS could not detect any hard drives besides the external one. When booting received error "Could not detect operating system" 2) Formatted external hard drive and re installed. It didn't make a difference, however interestingly when I booted from cd the ubuntu installer said it detected ubuntu 11.10 on the external hard drive. 3) Within BIOS I've messed around with every boot order combo I could think of both in the "Hard Disk boot order" screen and the "Boot order" screen. I'm a little confused of why there are two screens for this. 4) Held F12 during startup which opens (what I think is) the one time boot screen and it gave me the options "Hard Drive", "cd/dvd", "USB-FDD", "USB-cdrom", "USB-HDD", and "USB-something else I can't remember what it was". I tried all of them, but the same thing as before happened each time. ~References~ I noticed several people on askubuntu have tried to do something similar if not the exact same. In fact, I even found a post that pretty much outlines step by step exactly what I did... only their's worked. /jealous. Linky: Install Ubuntu or Kubuntu on a External USB Drive I'm willing to try a different version of ubuntu - it's not like my heart is set on 11.10, but it's a pain to open my case and unplug my internal hard drives so I'd prefer not to do this unless someone is reasonably confident it'll work. Thank you for all of your help in advance! I'm really looking forward to exploring Ubuntu!

  Read the article

• Various issues linked to my CD drive, when it has a disc in it

  - by Voyagerfan5761

  When I go to the Desktop and click on a media icon (for my flash drive, a CD, whatever it is), the following problems occur, in this approximate sequence: Nautilus will close if it's open. the desktop icons disappear my Window List shows a button that says "Starting File Manager" the icons reappear the button in Window List disappears Because of this problem, I can no longer drag and drop media, nor can I right-click to perform actions such as "Eject" and "Safely Remove Drive". The same symptoms occur if I click a media icon (that is also present on the desktop) in Nautilus' Computer view, though notably not if I click in the places list on the left. I have confirmed that this problem happens only if there is a CD in the drive (Matshita UJDA360). Also, inserting a disc into the CD drive appears to kill all running programs and restart Nautilus (or X; I'm not sure). Applications like Brasero and Rhythmbox will not start while there is a disc in the drive. Removing the disc doesn't result in the list of media updating; it must be forced to update by clicking on one of the desktop icons and going through one of the above-described cycles. It doesn't seem to matter what type of disc is in the drive. This has happened with CD-RWs I burned years ago using Roxio on Windows XP, the Ubuntu disc I installed from (burned with InfraRecorder Portable under Windows XP), and the retail game disc for Star Trek Armada II. The first indication of a problem was Brasero dying when I tried to insert a disc for erasure and rewriting. Since then, I've drafted several different questions on various issues, finally combining them into this one when I realized that having a CD in the drive was the common link. Could this be a simple driver issue? If Ubuntu is dynamically detecting my hardware on boot, can I specify drivers for devices that I know will be a problem if the default files are used? I'm beginning to think that my laptop, an old Dell Inspiron 2650, is just too old or proprietary-driver-hungry (or something, maybe RAM-starved) for Ubuntu and Windows XP to play nicely alongside each other. Or maybe I just need to carefully take my wall-wart machine to a coffee shop for an afternoon so I can download updates and such from the Internet, as I lack a home connection.

  Read the article

• I need help installing Ubuntu 11.10 to multi-drive system

  - by CookyMonzta

  I have a machine with 3 hard drives; the primary, which is 750GB (drive 0), and 2 others, each of which is 640GB (drives 1 and 2). On the last screen before the actual installation begins, this is how my hard drive configuration looks: /dev/sda [DISK0, 750GB] /dev/sda1 ntfs 104MB [Win7 System Reserved] /dev/sda2 ntfs 499,997MB [Windows 7 Pro] free space 250,052MB [This space intended for Windows 8] /dev/sdb [DISK1, 640GB] /dev/sdb1 ntfs 400,085MB [Windows XP Pro] free space 240,049MB [This space intended for Ubuntu] /dev/sdc [DISK2, 640GB] [This drive intended for various backups] free space 160,033MB /dev/sdc5 ntfs 480,101MB [Acronis Secure Zone] As you can see, I have 3 drives, all SATA. I have Win7 on my first drive (0), WinXP on my second drive (1) and a secure zone for daily backups on my third drive (2). I want to put Ubuntu 11.10 Oneiric Ocelot on the drive that also has XP. I've already used 400GB for XP and I have 240GB remaining, for which, my intention was to create a 4GB swap file and use the rest for Ubuntu itself. This is what my second hard drive looked like, for my intended setup before installation: /dev/sdb /dev/sdb5 swap 4,095MB [Linux swap] /dev/sdb6 ext4 235,951MB [Ubuntu 11.10] Needless to say, this is only the second time I have attempted to install Linux. I managed to get 7.10 Gutsy Gibbon working on an old machine. I have two problems with this installation: Ubuntu asks for a location to install the boot loader (i.e., "Device for Boot Loader Installation"). I already have a boot loader; namely, Acronis OS Selector (from Acronis Disk Director 11). So I decided to put the Ubuntu boot loader in /dev/sdb6 (where I intend to install Ubuntu), to keep it from interfering with my Acronis OS Selector. Once I hit "Install now", I ended up with the following error: "No root file system is defined. Please correct this from the partitioning menu." What am I missing? Did I attempt to put the boot loader in the wrong place? I assume I did, because as I am writing this entry, I am looking at LinuxIdentity.com's Ubuntu 11.04 Natty Narwhal magazine, and I see a screenshot (Figure 7 on Page 13) that implies that the boot loader can be installed anywhere, including the first hard drive (in the MBR, which would obviously force me to reinstall the Acronis OS Selector) or even on a floppy. But why do I get an undefined root file system error? I thought /dev/sdb6 was the root file. Obviously I'm missing something in the installation procedure. Should I try installing it in Windows using the WUBI Installer? I assume that, if I attempt to install Ubuntu from WinXP (on the second drive), it will automatically install Ubuntu on the empty partition alongside XP. But will I have the option of creating a swap partition? And what if the WUBI Installer searches all of my drives and decides to install Ubuntu on my first drive's empty partition (which I have left empty for Win8 upon its release)?

  Read the article

• How can I add a second hard drive to a previously configured UEFI/ACHI Windows 8 machine?

  - by pflyer

  Recently purchased a new Windows 8 PC. It came with one hard drive. I want to a second hard drive to it. This second hard drive is my data hard drive from my previous computer. However, I have run into issues when the system accesses it. The drive is found in the BIOS. But is not seen by Explorer or Disk Management. I have added the drive to the next available SATA slot: SATA 2. The machine is a UEFI/ACHI based machine. In my reading I have found people documenting the following: 1) adding multiple partitioned hard drives (like mine is) to UEFI based machines is not possible 2) I have seen it suggested that you can only add blank hard drives to UEFI based machines. However, in doing so, I did not have success. I tried to add it as a hard drive with unallocated space and then as a hard drive with a single simple partition. Both attempts failed. My ultimate question: What is the proper procedure for adding a second hard drive to a UEFI/ACHI machine? I do not want to reinstall the OS and start from scratch as I have seen suggested elsewhere. There has to be a way to accomplish this without all that hassle. Thanks in advance for your help.

  Read the article

• Why can't Ubuntu find an ext3 filesystem on my hard-drive?

  - by urig

  This question is related to this question: Not enough components to start the RAID array? I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. I have followed instructions in this forum post, intended to mount the drive through Terminal: http://mybookworld.wikidot.com/forum/t-90514/how-to-recover-data-from-wd-my-book-world-edition-nas-device#post-976452 I have identified the partition that I want to mount and recover files from as /dev/sd4 by running "fdisk -l" and getting this: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001cf00 Device Boot Start End Blocks Id System /dev/sdb1 5 248 1959930 fd Linux raid autodetect /dev/sdb2 249 280 257040 fd Linux raid autodetect /dev/sdb3 281 403 987997+ fd Linux raid autodetect /dev/sdb4 404 121601 973522935 fd Linux raid autodetect// When I try to mount using: "mount -t ext3 /dev/sdb4 /media/xyz" I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And "dmesg | tail" shows me: [ 15.184757] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 15.986859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.988379] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.353379] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.705944] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 16.705951] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 16.706102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.125673] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.600012] eth0: no IPv6 routers present [ 373.478031] EXT3-fs (sdb4): error: can't find ext3 filesystem on dev sdb4. I guess that last line is the punch line :) Why can't it find the ext3 filesystem on my drive? What do I need to do to mount this partition and copy its contents? Does it have anything to do with the drive being part of a RAID Array (see question mentioned above)? Many thanks to any who can help.

  Read the article

• 12.04 LTS won't install from CD

  - by Rob Hays

  I've been trying to install 12.04 LTS onto a Dell with a PIII from CD. Booting from the CD the install gets through the "Who are you" process, begins copying files. The progress bar gets as far as the last period in "Copying files...". The box clears, and an error box comes up "The installer has encountered an unrecoverable error. A desktop session will now be run so that you may investigae the problem or try installing again." When I try to install from this desktop session, the install gets to the same point, the copying files box closes, and then just stops. The pointer is busy, the cd drive spins up occaisonally with no data transfer, no hard drive activity. When I boot from the CD and access the disk boot menu, the disk checks good, memory checks good ( I upgraded the original memory to 512 mb). I also updated the bios to the newest from Dell. This is an older L866r, but should meet the requirements.

  Read the article

• Clone a Windows Installation to a 3TB Hard Drive; MBR to GPT

  - by DanBlakemore

  I have Windows 7 Professional 64-bit installed on my desktop. Unfortunately for me and my wallet my hard drive is failing. I have purchased a 3TB hard drive as a replacement for my current 2TB drive. I would like to avoid as much hassle as possible in moving to this new drive so I would like to copy my current partition to the new drive using Gparted. The problem is that I suspect that my current partition is MBR, and I need GPT on my new drive since it is 3TB. Can I simply copy the MBR partition onto the new disk and then convert it to GPT after the fact (can you even convert the type of a partition)? Or would I need to somehow copy the contents of the partition into a GPT partition on the new drive? How do I go about making this transistion? Also, are there any issues I should be wary of booting to a GPT partition? If it matters, my motherboard is 1 year old as of May, 2012. Edit: My motherboard is 1 day old. My old one does not have UEFI compatibility, so I decided to make an upgrade to Intel today given that I would need a UEFI motherboard to use my new HDD. How much can I use a dying hard drive (bad sectors according to Hitachi Drive Fitness Test)? I have assumed not at all, to be safe.

  Read the article

• How to create multiboot flash drive

  - by Nrew

  I've found a guide here: http://www.pendrivelinux.com/boot-multiple-iso-from-usb-multiboot-usb/ And found this menu.lst in my flash drive, which seems to be the one that I'm seeing when I boot using my flash drive: # This Menu Created by Lance http://www.pendrivelinux.com # Ongoing Suggested Menu Entries and the Suggestor are noted! default 0 timeout 30 color NORMAL HIGHLIGHT HELPTEXT HEADING splashimage=(hd0,0)/splash.xpm.gz foreground=FFFFFF background=0066FF title Memtest86+ find --set-root /memtest86+-4.00.iso map --mem /memtest86+-4.00.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by madprofessor title Boot Clonezilla root (hd0,0) kernel /clonezilla/live/vmlinuz live-media-path=clonezilla/live bootfrom=/dev/sd boot=live union=aufs noprompt ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" ocs_lang="" vga=791 ip=frommedia initrd /clonezilla/live/initrd.img title Parted Magic 4.9 (Partition Tools) find --set-root /pmagic-4.9.iso map /pmagic-4.9.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by Deb title Partition Wizard 4.2 (Partition Tools) find --set-root /pwhe42.iso map /pwhe42.iso (hd32) map --hook root (hd32) chainloader (hd32) title Balder DOS image (FreeDOS) map --unsafe-boot /balder10.img (fd0) map --hook chainloader --force (fd0)+1 rootnoverify (fd0) # Suggested by Szymon Silski title Linux Mint 8 find --set-root /LinuxMint-8.iso map /LinuxMint-8.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper persistent iso-scan/filename=/LinuxMint-8.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 find --set-root /ubuntu-10.04-desktop-i386.iso map /ubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz title Xubuntu 10.04 (XFCE Desktop) find --set-root /xubuntu-10.04-desktop-i386.iso map /xubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz title Kubuntu 10.04 (KDE Desktop) find --set-root /kubuntu-10.04-desktop-i386.iso map /kubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz # Suggested by Ambriel title Lubuntu 10.04 (LXDE Lightweight Desktop) find --set-root /lubuntu-10.04.iso map /lubuntu-10.04.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper persistent iso-scan/filename=/lubuntu-10.04.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 Netbook Remix (NetBook Distro) find --set-root /ubuntu-10.04-netbook-i386.iso map /ubuntu-10.04-netbook-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/netbook-remix.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-netbook-i386.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 Server Edition Installer (32 bit Installer Only) find --set-root /ubuntu-10.04-server-i386.iso map /ubuntu-10.04-server-i386.iso (0xff) map --hook root (0xff) kernel /install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed boot=install iso-scan/filename=/ubuntu-10.04-server-i386.iso splash initrd /install/initrd.gz title Ubuntu 9.10 find --set-root /ubuntu-9.10-desktop-i386.iso map /ubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz title Xubuntu 9.10 find --set-root /xubuntu-9.10-desktop-i386.iso map /xubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz title Kubuntu 9.10 find --set-root /kubuntu-9.10-desktop-i386.iso map /kubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz # Ubuntu Server and Netbook Remix suggested by Wojciech Holek title Ubuntu 9.10 Server Edition Installer (Installer Only) find --set-root /ubuntu-9.10-server-i386.iso map /ubuntu-9.10-server-i386.iso (0xff) map --hook root (0xff) kernel /install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed boot=install iso-scan/filename=/ubuntu-9.10-server-i386.iso splash initrd /install/initrd.gz title Ubuntu 9.10 Netbook Remix (NetBook Distro) find --set-root /ubuntu-9.10-netbook-remix-i386.iso map /ubuntu-9.10-netbook-remix-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/netbook-remix.seed boot=casper persistent iso-scan/filename=/ubuntu-9.10-netbook-remix-i386.iso splash initrd /casper/initrd.lz title Ubuntu 9.10 Rescue Remix (Recovery Tools) find --set-root /ubuntu-rescue-remix-9-10-revision1.iso map /ubuntu-rescue-remix-9-10-revision1.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper iso-scan/filename=/ubuntu-rescue-remix-9-10-revision1.iso splash initrd /casper/initrd.lz title DSL 4.4.10 find --set-root /dsl-4.4.10-initrd.iso map --mem /dsl-4.4.10-initrd.iso (hd32) map --hook root (hd32) chainloader (hd32) title AVG Rescue CD (Anti-Virus + Anti-Spyware) find --set-root /avg_arl_en_90_100114.iso map /avg_arl_en_90_100114.iso (hd32) map --hook chainloader (hd32) title Ultimate Boot CD 4.11 find --set-root /ubcd411.iso map /ubcd411.iso (hd32) map --hook chainloader (hd32) title OphCrack XP 2.3.1 (XP Password Cracker) find --set-root /ophcrack-xp-livecd-2.3.1.iso map /ophcrack-xp-livecd-2.3.1.iso (0xff) map --hook root (0xff) kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin initrd /boot/rootfs.gz title OphCrack Vista 2.3.1 (Vista Password Cracker) find --set-root /ophcrack-vista-livecd-2.3.1.iso map /ophcrack-vista-livecd-2.3.1.iso (0xff) map --hook root (0xff) kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin initrd /boot/rootfs.gz # Suggested by Greg Steer title Offline NT Password & Registy Editor find --set-root /cd080802.iso map /cd080802.iso (hd32) map --hook chainloader (hd32) title SliTaz 2.0 find --set-root /slitaz-2.0.iso map --mem /slitaz-2.0.iso (hd32) map --hook chainloader (hd32) title Riplinux 9.3 find --set-root /RIPLinuX-9.3.iso map --heads=0 --sectors-per-track=0 /RIPLinuX-9.3.iso (0xff) || map --heads=0 --sectors-per-track=0 --mem /RIPLinuX-9.3.iso (0xff) map --hook chainloader (0xff) # Suggested by Sunny title YlmF (Windows Like OS) find --set-root /YlmF_OS_EN_v1.0.iso map /YlmF_OS_EN_v1.0.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/YlmF_OS_EN_v1.0.iso splash initrd /casper/initrd.lz # Suggested by Martin Andersson title DBAN 1.0.7 (Drive Nuker) find --set-root /dban-1.0.7_i386.iso map --mem /dban-1.0.7_i386.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by Robin McGough title xPUD 0.9.2 (NetBook Distro) find --set-root --ignore-floppies --ignore-cd /xpud-0.9.2.iso map --heads=0 --sectors-per-track=0 /xpud-0.9.2.iso (hd32) map --hook chainloader (hd32) title Puppy 4.3.1 find --set-root /puppy/pup-431.sfs kernel /puppy/vmlinuz initrd /puppy/initrd.gz # Suggested by Relst title Run a Linux OS from the Internet kernel /gpxe.lkrn I also put some .iso files for os installers (Windows xp sp2 and Ubuntu 10.04) But they didn't show up in the list when I booted Do I need to: extract the .iso files and put in in their respective folders? Add the os that I added on the menu.lst? How do I add the iso image(os) in the menu.lst? Before adding the .iso files I first made a folder named Windows xp sp2 then placed the .iso files in there. Please help, I think I need to add the folder name or the file name on the menu.lst but I don't know how

  Read the article

• Repairing hard disk when Windows installation disk won't boot

  - by Echows

  I'm trying to recover some data from a faulty hard disk with Windows installed on it (on which Windows won't even boot). I have tried so far: Booting to Ubuntu live USB stick and running ntfsfix (didn't work) Trying to mount the broken partition when running Ubuntu from usb stick (doesn't mount) Running photorec image recovery tool from live Ubuntu (it found some stuff but not the images I was looking for) Now as a last resort I got myself a Windows installation on a USB stick so that I can try fdisk, but the installer doesn't work. The loading screen shows up and then the installer crashes. The installer works fine on other computers. I suspect that the installer is trying to read the hard drive to see if there's something there but when it can't read one partition, it crashes. On Ubuntu, I can mount other partitions except the one I'm interested in so at least the hard drive is not completely dead. So the question is, what options do I have left? To be more specific, my goal is to recover some images from the faulty ntfs-partition on the hard drive. Other than that, I don't care about the contents of the hard disk.

  Read the article

• Hard drive write speed - finding a lighter antivirus?

  - by Shingetsu

  I recently have been getting a lot of system lag here (for example, the mouse and the display in general take about 15 seconds to react in the worst cases). After a lot of monitoring the resources, I found that the problem mainly happens when too much Disk I/O is being done. Three culprits have been identified: My browser had the highest write I/O with 35,000,000 I/O Write Bytes. Steam had the highest read I/O (when IDLE!!!) with 106,000,000 I/O Read Bytes. My antivirus (in both cases I will soon mention) was the runner up in both cases with: 30,000,000ish write and 80,000,000ish read. The first AV I had was Avast! which I had liked on my previous system. After noticing it taking so much I/O I switched to Panda (supposing it wouldn't use TOO much during idle phase). However it only used a bit less I/O. Just a lot less memory and cpu and somewhat more network. My browser at the moment is Maxthon 3 (which I like a lot). Before this I was running chrome which had similar data and much higher cpu when running in the background was enabled. I'm not going to be running steam all the time and there aren't many alternatives to it. I like my browser very much, but I AM willing to switch if there's an obvious problem (I'm in programming, however I'm not a very good sysadmin, especially not when it comes to windows). Finally, my system almost stops lagging when I turn off the antivirus (and preferably steam) (some remains but once in every 5-6 hours for a few seconds so it isn't a big problem). My question (has a few parts): Is it possible to configure steam to lower it's I/O usage? (and maybe network while we're at it?) Which antivirus (very preferably free) uses lowest I/O while idle (I leave PC alone during active scans so that isn't a problem). Is there an obvious problem with my current browser and, if so, is there a way to fix it or should I switch and, if so, to what? (P.S. I've been on FFox for some time too). Info on system: Windows 7 (32 bit T_T, I am getting a new one in a few months but I want to keep using system during that time though). Hard Drive (main) is a Raid0. (Also have an external 1TB one which contains steam (and steam alone). As such it doesn't get used by much anything other than steam and isn't a very large problem. However steam still uses some I/O of registry) CPU: Intel(R) Core(TM)2 CPU [email protected] RAM: 6GB (3.25GB usable) (this and CPU have little effect as shown in next section) Additional info: Memory usage during problematic times: 44% CPU usage during problematic times: 35% Page File: main drive: system managed. 1TB drive: none. The current system I'm using is about 6 years old and is mainly a place holder while I await the new one in a few months. Final words: this is my 1st post on Super User (this question wouldn't feel right on Stack Overflow where I usually stay). If it doesn't have it's place here please tell me. If anything is wrong with it, same. Edit Technically I'm looking for a live thread detection program with minimal IO usage. I already have good active scan capability: Kaspersky (the free scanner uses the paid database) and MalwareBytes. Edit 2 Noticed another one, it seems that windows media player has been using stuff even when off! Turning it off and restarting now. If the problem is fixed I'll tell you guys. The reason I didn't notice it before was because I didn't have resource manager in front of me at the MOMENT of the problem. Now I did and it was at the very top of the list!

  Read the article

• Could I have destroyed Partitioning-Scheme/Filesystem of HDDs with External Harddrive Case with builtin Raid-Controller?

  - by th3m3s

  I had just recently bought a Fantec QB-35US3R to have a nice box on my desk to make some backups to. Along with the HDD-Bay I had ordered some 4TB HDDs to let them run in Raid 5, which is handled by the hardware RAID controller of the Fantec HDD-Bay. The QB-35US3R arrived a few days before the hard drives, so I got impatient and had the idea to put three old 1TB disks in the Fantec device, just to test it... Long story short: I made a backup of the most important data on these three disks before they broke. I had set the configuration scheme to RAID 3 at the Fantec device. It seems, that the Fantec RAID controller has "somehow" destroyed the partitioning scheme or the file system, because when put into a HDD docking station, they get recognized by the OS (Ubuntu/Linux) but are not mountable anymore. I tried to recover the data from one HDD via gParted (parted), which ran some hours without success. Here I stopped, before trying other tools, cos I read that the longer a hard drive is running after a the partitioning got destroyed, the worse it gets. What could the HDD-Bay probably have done to my lovely hard drive disks? Is there some routine a RAID controller is executing, when it wants to create a RAID system? Like erasing the partition table (seems not plausible to me.) or writing some information to every hard drive in the RAID (seems more likely to me.)? Is there a chance to recover the data from these HDDs, or is the change a RAID controller makes so significant, that no software is of help?

  Read the article

• Can't boot Ubuntu 12.04 from external Hard Drive using Mac

  - by Catgirl the Crazy

  Recently, I upgraded the RAM and hard drive on my Early 2008 Macbook to improve the performance. Rather than throw away the old hard drive, I bought an enclosure for it to turn it into an external hard drive, and, since all the data was migrated to my new drive, I decided to install Ubuntu on it for funsies (note: I am a near-total Ubuntu n00b). My first attempt to install Ubuntu didn't work (it gave me errors about not being able to find the BIOS or something), but my second attempt finished successfully (can't remember what, if anything, I did different). However, when I plug the external drive into my Macbook, it gives me a message saying it can't read the disk. Moreover, when I go into the Startup Manager (i.e.: what you get when you turn on the Macbook while holding the option key), the external drive is not one of the available startup disks. I thought this might be because I have an older Macbook, so I tried booting it with my mom's Late 2011 Macbook, and got the same results. Then I tried booting it through my dad's Dell laptop that runs Windows 7, and that time it worked. This is really counter intuitive to me, since the hard drive originally came from a Macbook, so if anything you'd think it would be less compatible with the Windows laptop than the Macbook. In case it helps, here's a link to a picture of how I set up the partition table while doing the install (not shown there is the fact that I checked the "Format?" box next to the /boot partition, since it gave me a warning when I tried to continue the installation without doing so) Anyone have any clue at all? If it helps, the hard drive I'm using is a 120GB 5400-rpm Serial ATA hard disk drive.

  Read the article

• USB Drive Not recognized

  - by user36582

  My Friend's Pen Drive, which was working well very well just few days ago, is not being recognized after getting used by a virus affected machine. Its not on fdisk -l or lsusb However in dmesg I can see the following: [ 977.300013] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 977.420014] usb 5-2: device descriptor read/64, error -71 [ 977.644023] usb 5-2: device descriptor read/64, error -71 [ 977.860013] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 977.980013] usb 5-2: device descriptor read/64, error -71 [ 978.204013] usb 5-2: device descriptor read/64, error -71 [ 978.420013] usb 5-2: new full speed USB device using uhci_hcd and address 4 [ 978.828015] usb 5-2: device not accepting address 4, error -71 [ 978.940015] usb 5-2: new full speed USB device using uhci_hcd and address 5 [ 979.348013] usb 5-2: device not accepting address 5, error -71 [ 979.348292] hub 5-0:1.0: unable to enumerate USB device on port 2 [ 1017.848015] usb 5-2: new full speed USB device using uhci_hcd and address 6 [ 1017.968012] usb 5-2: device descriptor read/64, error -71 [ 1018.192017] usb 5-2: device descriptor read/64, error -71 [ 1018.408014] usb 5-2: new full speed USB device using uhci_hcd and address 7 [ 1018.528012] usb 5-2: device descriptor read/64, error -71 [ 1018.752023] usb 5-2: device descriptor read/64, error -71 [ 1018.968012] usb 5-2: new full speed USB device using uhci_hcd and address 8 [ 1019.376019] usb 5-2: device not accepting address 8, error -71 [ 1019.488011] usb 5-2: new full speed USB device using uhci_hcd and address 9 [ 1019.896016] usb 5-2: device not accepting address 9, error -71 [ 1019.896308] hub 5-0:1.0: unable to enumerate USB device on port 2 [ 1049.984016] usb 5-1: new full speed USB device using uhci_hcd and address 10 [ 1050.104014] usb 5-1: device descriptor read/64, error -71 [ 1050.328014] usb 5-1: device descriptor read/64, error -71 [ 1050.544014] usb 5-1: new full speed USB device using uhci_hcd and address 11 [ 1050.664018] usb 5-1: device descriptor read/64, error -71 [ 1050.888019] usb 5-1: device descriptor read/64, error -71 [ 1051.104025] usb 5-1: new full speed USB device using uhci_hcd and address 12 [ 1051.512014] usb 5-1: device not accepting address 12, error -71 [ 1051.624101] usb 5-1: new full speed USB device using uhci_hcd and address 13 [ 1052.032014] usb 5-1: device not accepting address 13, error -71 [ 1052.032991] hub 5-0:1.0: unable to enumerate USB device on port 1 What these Errors actually mean and how Can I get this pen drive Back to work ??

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >