Search Results

Search found 28350 results on 1134 pages for 'command switch'.

Page 28/1134 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• How do I connect to and factory reset a Catalyst 3560 Switch?

  - by Josh

  My company just bought another company. In their server room they had some older hardware, which I would like to repurpose. One of these is a Cisco Switch: C3560G-48TS-S. I found some instructions about this switch here but this is not a guide for a beginner. I have no idea how to connect to this thing to begin running the commands. It says Configure the PC terminal emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control. But I can't find anything on how to do this (assuming with telnet?) or even what program to use. I also don't know how to find the IP address of the device to connect to it. My research also says once I get in there, I need to run clear config all Is this the right command? Also, what if I can't get the username and password for these devices? Is there some way to factory reset (my only experience is with devices that have a hardware reset button) EDIT: I should note that when I push the button on the front the three lights blink, which according to the documentation indicated the switch is configured and "not available for express setup"

  Read the article

• design for a wrapper around command-line utilities

  - by hatchetman82

  im trying to come up with a design for a wrapper for use when invoking command line utilities in java. the trouble with runtime.exec() is that you need to keep reading from the process' out and err streams or it hangs when it fills its buffers. this has led me to the following design: public class CommandLineInterface { private final Thread stdOutThread; private final Thread stdErrThread; private final OutputStreamWriter stdin; private final History history; public CommandLineInterface(String command) throws IOException { this.history = new History(); this.history.addEntry(new HistoryEntry(EntryTypeEnum.INPUT, command)); Process process = Runtime.getRuntime().exec(command); stdin = new OutputStreamWriter(process.getOutputStream()); stdOutThread = new Thread(new Leech(process.getInputStream(), history, EntryTypeEnum.OUTPUT)); stdOutThread.setDaemon(true); stdOutThread.start(); stdErrThread = new Thread(new Leech(process.getErrorStream(), history, EntryTypeEnum.ERROR)); stdErrThread.setDaemon(true); stdErrThread.start(); } public void write(String input) throws IOException { this.history.addEntry(new HistoryEntry(EntryTypeEnum.INPUT, input)); stdin.write(input); stdin.write("\n"); stdin.flush(); } } public class Leech implements Runnable{ private final InputStream stream; private final History history; private final EntryTypeEnum type; private volatile boolean alive = true; public Leech(InputStream stream, History history, EntryTypeEnum type) { this.stream = stream; this.history = history; this.type = type; } public void run() { BufferedReader reader = new BufferedReader(new InputStreamReader(stream)); String line; try { while(alive) { line = reader.readLine(); if (line==null) break; history.addEntry(new HistoryEntry(type, line)); } } catch (Exception e) { e.printStackTrace(); } } } my issue is with the Leech class (used to "leech" the process' out and err streams and feed them into history - which acts like a log file) - on the one hand reading whole lines is nice and easy (and what im currently doing), but it means i miss the last line (usually the prompt line). i only see the prompt line when executing the next command (because there's no line break until that point). on the other hand, if i read characters myself, how can i tell when the process is "done" ? (either complete or waiting for input) has anyone tried something like waiting 100 millis since the last output from the process and declaring it "done" ? any better ideas on how i can implement a nice wrapper around things like runtime.exec("cmd.exe") ?

  Read the article

• In Java, send commands to another command-line program

  - by bradvido

  I am using Java on Windows XP and want to be able to send commands to another program such as telnet. I do not want to simply execute another program. I want to execute it, and then send it a sequence of commands once it's running. Here's my code of what I want to do, but it does not work: (If you uncomment and change the command to "cmd" it works as expected. Please help.) try { Runtime rt = Runtime.getRuntime(); String command = "telnet"; //command = "cmd"; Process pr = rt.exec(command); BufferedReader processOutput = new BufferedReader(new InputStreamReader(pr.getInputStream())); BufferedWriter processInput = new BufferedWriter(new OutputStreamWriter(pr.getOutputStream())); String commandToSend = "open localhost\n"; //commandToSend = "dir\n" + "exit\n"; processInput.write(commandToSend); processInput.flush(); int lineCounter = 0; while(true) { String line = processOutput.readLine(); if(line == null) break; System.out.println(++lineCounter + ": " + line); } processInput.close(); processOutput.close(); pr.waitFor(); } catch(Exception x) { x.printStackTrace(); }

  Read the article

• Processing command-line arguments in prefix notation in Python

  - by ejm

  I'm trying to parse a command-line in Python which looks like the following: $ ./command -o option1 arg1 -o option2 arg2 arg3 In other words, the command takes an unlimited number of arguments, and each argument may optionally be preceded with an -o option, which relates specifically to that argument. I think this is called a "prefix notation". In the Bourne shell I would do something like the following: while test -n "$1" do if test "$1" = '-o' then option="$2" shift 2 fi # Work with $1 (the argument) and $option (the option) # ... shift done Looking around at the Bash tutorials, etc. this seems to be the accepted idiom, so I'm guessing Bash is optimized to work with command-line arguments this way. Trying to implement this pattern in Python, my first guess was to use pop(), as this is basically a stack operation. But I'm guessing this won't work as well on Python because the list of arguments in sys.argv is in the wrong order and would have to be processed like a queue (i.e. pop from the left). I've read that lists are not optimized for use as queues in Python. So, my ideas are: convert argv to a collections.deque and use popleft(), reverse argv using reverse() and use pop(), or maybe just work with the int list indices themselves. Does anyone know of a better way to do this, otherwise which of my ideas would be best-practise in Python?

  Read the article

• Invoke Command When "ENTER" Key Is Pressed In XAML

  - by bitxwise

  I want to invoke a command when ENTER is pressed in a TextBox. Consider the following XAML: <UserControl ... xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" ...> ... <TextBox> <i:Interaction.Triggers> <i:EventTrigger EventName="KeyUp"> <i:InvokeCommandAction Command="{Binding MyCommand}" CommandParameter="{Binding Text}" /> </i:EventTrigger> </i:Interaction.Triggers> </TextBox> ... </UserControl> and that MyCommand is as follows: public ICommand MyCommand { get { return new DelegateCommand<string>(MyCommandExecute); } } private void MyCommandExecute(string s) { ... } With the above, my command is invoked for every key press. How can I restrict the command to only invoke when the ENTER key is pressed? I understand that with Expression Blend I can use Conditions but those seem to be restricted to elements and can't consider event arguments. I have also come across SLEX which offers its own InvokeCommandAction implementation that is built on top of the Systems.Windows.Interactivity implementation and can do what I need. Another consideration is to write my own trigger, but I'm hoping there's a way to do it without using external toolkits.

  Read the article

• Run script after switching user account "to the same account"

  - by Peter Sivák

  In Ubuntu, when I click on Switch User Account... and then choose the same account to log in (for example if my name is John Smith, I click on switch user account and then log into the John Smith account again), how can I run a script after that? (I know, that I can run a script after "first" login by putting it in /etc/profile file, but this script is not executed again when I choose switch user account and then immediately log in back to the same account.)

  Read the article

• Is there a command-line utility app which can find a specific block of lines in a text file, and replace it?

  - by fred.bear

  UPDATE (see end of question) The text "search and replace" utility programs I've seen, seem to only search on a line-by-line basis... Is there a command-line tool which can locate one block of lines (in a text file), and replace it with another block of lines.? For example: Does the test file file contain this exact group of lines: 'Twas brillig, and the slithy toves Did gyre and gimble in the wabe: All mimsy were the borogoves, And the mome raths outgrabe. 'Beware the Jabberwock, my son! The jaws that bite, the claws that catch! Beware the Jubjub bird, and shun The frumious Bandersnatch!' I want this, so that I can replace multiple lines of text in a file and know I'm not overwriting the wrong lines. I would never replace "The Jabberwocky" (Lewis Carroll), but it makes a novel example :) UPDATE: ..(sub-update) My following comment about reasons when not use sed are only in the context of; don't push any tool too far beyond its design intent (I use sed quite often, and consider it to be invaluable.) I just now found an interesting web page about sed and when not to use it. So, because of all the sed answers, I"ll post the link.. it is part of the sed FAQ on sourceforge Also, I'm pretty sure there is some way diff can do the job of locating the block of text (once it's located, the replacement is quite straight foward; using head and tail) ... 'diff' dumps all the necessary data, but I haven't yet worked out how to filter it , ... (I'm still working on it)

  Read the article

• How can I find which "command" corresponds to opening a gnome-panel menu, for use in a keyboard shortcut?

  - by Ryan Jendoubi

  There are many questions and answers here and around the web on setting basic keyboard shortcuts in GNOME. Most of them are either for launching applications, or Compiz settings, or for changing defaults for other things for which Ubuntu provides defaults shortcuts. What I want to know though is how to refer to a gnome-panel menu item in a custom keyboard shortcut. I'm using Ubuntu 11.10 with GNOME Classic, and the old GNOME 2 / Ubuntu 10.04 keyboard shortcuts for the main menus (Alt-F1) and the "Me Menu" (Super+S) don't seem to work. So my question is two-fold. Primarily I'd like to know how to set those shortcuts. But a second-order question is how I could have found this out myself: is there some program I can use to see what signals or commands are fired off when I click on various things, in this case gnome-panel menu items? I'm interested in the broader question because I've sometimes wanted to set shortcuts for specific menus or menu items in GNOME 2, so a way to find out what command I need there would be useful. Give a man a rod, as they say :-) I've had a look at a good lot of keyboard shortcut and menu related items here to no avail. One somewhat relevant question is this one, but it's just a "how do I do it" question, and applies to Unity, not GNOME, although it would be great if whatever investigatory method answers this question might also apply under different desktops, like Unity. The answer to this question is essentially how I was doing it in 10.04 / GNOME 2, although the questioner's query isn't exactly addressed - how to get directly to "Broadcast" with a key combination. Again, it would be great if an answer delving into how such menus work and how they interact with the rest of the system would be applicable to pinpoint menu items.

  Read the article

• Error message when running "make" command: /usr/bin/ld: i386 architecture of input file is incompatible with i386:x86-64 output

  - by user784637

  I am unable to create a working executable file by running the make command in a tree previously built on an i386 machine. I'm getting an error message in the form of me@me-desktop:~$ make /usr/bin/ld: i386 architecture of input file `../.. /Lib/libProgram.a(something.o)' is incompatible with i386:x86-64 output I've been told and reassured that this program has been tested and successfully compiled on 64-bit Fedora. I'm running a 64-bit machine me@me-desktop:~$ uname -m x86_64 I'm running Ubuntu 10.04 me@me-desktop:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.3 LTS Release: 10.04 Codename: lucid I'm using g++ # me@me-desktop:~$ g++ --version g++ (Ubuntu 4.4.3-4ubuntu5) 4.4.3 Copyright (C) 2009 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. I'm also using libtool # me@me-desktop:~$ libtool --version ltmain.sh (GNU libtool) 2.2.6b Written by Gordon Matzigkeit <[email protected]>, 1996 Any clues as to what is going wrong?

  Read the article

• How do I find add-ons for packages when using the command line?

  - by user74660

  My question is a little bit different from others already asked, I guess. I've already searched for answers, but I didn't find anything related. For example, I've always installed K3B via Terminal with the following command "sudo apt-get install k3b". It always worked, of course. One day, I decided to install it via Ubuntu Sofware Center and, to my surprise, there were a few Add-ons I didn't know about. I checked some of them to be installed as well because I found them useful. Now, here's my question: When we try to install a software via Terminal and this software has add-ons, how do we know that? And how do we install the add-ons via Terminal? I suppose we have to know the names of the add-ons first, and then install them one by one, once the main software has already been installed. But how do we get to know those names via Terminal? Using the Software Center is cool because it shows the add-ons, a brief description for each one and their names in brackets, right? How about that via Terminal? I had never paid attention to this until I used the Software Center. By the way, K3B was just an example, of course.

  Read the article

• How do I add more than one command to /etc/rc.local?

  - by Andreas

  I want to add two power saving commands to /etc/rc.local file. This to dissable bluetooth: rfkill block bluetooth And this to reduce screen brightness: echo 3024 > /sys/class/backlight/intel_backlight/brightness Separately added to /etc/rc.local they work but not both of them together like this: #/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 3024 > /sys/class/backlight/intel_backlight/brightness rfkill block bluetooth exit 0 How do I add the two commands to get them properly executed at start-up? Update It turned out to be a timing issue. I fixed it by delaying the execution of the first command thus: (sleep 5; echo 3021 > /sys/class/backlight/intel_backlight/brightness)&

  Read the article

• Install a vimball from the command line.

  - by Robert Massaioli

  As this post points out you can install Vimballs using the normal: vim somevimball.vba :so % :q But if you want to install a from the command line how do you do it? I ran a 'man vim' and it seems like the best "from source install" option was the '-S' option so I tried to install haskellmode with it: wget 'http://projects.haskell.org/haskellmode-vim/vimfiles/haskellmode-20090430.vba' vim -S haskellmode-20090430.vba and that failed to work. It gave me the following error: Error detected while processing function vimball#Vimball: line 10: (Vimball) The current file does not appear to be a Vimball! press ENTER or type command to continue It should be noted that using the first method I was able to successfully install the vimball. I have tried the second method on a few other vimballs and it has failed every time. Is there a way to install a vimball from the command line? It seems like a useful sort of task. Oh, and I am running the following version of vim: Version: 2:7.2.330-1ubuntu3 Thanks.

  Read the article

• Ruby from the command line - sticking - Windows

  - by tyndall

  I have seen this behavior on Windows with Ruby for a long time. If I install a gem sometimes the command line will just get "lost" and stop printing output until you go back to the command line and hit enter a few times. I notice this in other places too. Like starting up a Ruby on Rails console. Or generating a model with Rails. Have other people seen this? What causes this? The weird thing is this doesn't happen all the time. I have never seen this with PHP, Lua, Perl or Python from the command line. I have seen this on Vista and Windows 7 (32-bit and 64-bit). This happens on multiple machines.

  Read the article

• android : how to run a shell command from within code

  - by ee3509

  I am trying to execute a command from within my code, the command is "echo 125 /sys/devices/platform/flashlight.0/leds/flashlight/brightness" and I can run it without problems from adb shell I am using Runtime class to execute it : Runtime.getRuntime().exec("echo 125 > /sys/devices/platform/flashlight.0/leds/flashlight/brightness"); However I get a permissions error since I am not supposed to access the sys directory. I have also tried to place the command in a String[] just in case spaces caused a problem but it didn't make much differense. Does anyone know any workaround for this ?

  Read the article

• python,running command line servers - they're not listening properly

  - by deepblue

  hello all Im attempting to start a server app (in erlang, opens ports and listens for http requests) via the command line using pexpect (or even directly using subprocess.Popen()). the app starts fine, logs (via pexpect) to the screen fine, I can interact with it as well via command line... the issue is that the servers wont listen for incoming requests. The app listens when I start it up manually, by typing commands in the command line. using subprocess/pexpect stops the app from listening somehow... when I start it manually "netstat -tlp" displays the app as listening, when I start it via python (subprocess/pexpect) netstat does not register the app... I have a feeling it has something to do with the environemnt, the way python forks things, etc. Any ideas? thank you

  Read the article

• Makefile : assigning function variable in target command line

  - by Michael

  I need the xpi_hash variable to be assigned only when update target's command is decided to execute. Then I'm using this variable as environment, exporting, etc.. If I put it outside of rule, it will be expanded firstly, before $(xpi) target is called, hence will not find that file. update: $(xpi) $(target_update_rdf) xpi_hash := $(shell sha1sum $(xpi) | grep -Eow '^[^ ]+') @echo "Updating..." and above of course is not correct, because for command part the shell is represented. So maybe another way to put this question is - how to bring variable as command output?

  Read the article

• how to use insert command in sql analysis services

  - by imcolin

  Hi all, I have a problem regarding how to use insert command in ssas, i try to send a request to server, server give a response saying "No binding exists for it", my request envelope is:- <Envelope xmlns="http://schemas.xmlsoap.org/soap/envelope/"> SSAS SsasCubes Sales Territory Sales Territory Key fds aa 1033 Should i create a attribut binding before using insert command??? any body can help me ? one more question, when i use Update command in ssas, I also got a error say "Attributes cannot appear in Where ". can you tell me why?? Thanks

  Read the article

• Problem with starting OpenOffice service (soffice) from Java (command working in commandline, but no

  - by Shervin

  I want to exceute a simple command which works from the shell but doesn't work from Java. This is the command I want to execute, which works fine: soffice -headless "-accept=socket,host=localhost,port=8100;urp;" This is the code I am excecuting from Java trying to run this command: String[] commands = new String[] {"soffice","-headless","\"-accept=socket,host=localhost,port=8100;urp;\""}; Process process = Runtime.getRuntime().exec(commands) int code = process.waitFor(); if(code == 0) System.out.println("Commands executed successfully"); When I run this program I get "Commands executed successfully". However the process is not running when the program finishes. Is it possible that the JVM kills the program after it has run? Why doesn't this work?

  Read the article

• Batch command getting error

  - by alice7

  Hi Guys, I wrote a simple batch file which checks whether the c drive path exists then execute the exe in that path else try the d drive path and execute it. IF EXIST c:\program files\x goto a ELSE goto b :a cd c:\program files\x executable.exe c:\temp\col.zip :b cd d:\program files\x executable.exe c:\temp\col.zip Im getting this error: ----Error Ouput-- 'ELSE' is not recognized as an internal or external command, operable program or batch file. The system cannot find the path specified. 'executable.exe' is not recognized as an internal or external command, operable program or batch file. 'dellsysteminfo.exe' is not recognized as an internal or external command, operable program or batch file. I don't know why.

  Read the article

• command line tool text output

  - by Martin

  I have a small command line tool and after running it, I'd like to display the text output in a way that's easy for someone to copy/paste and save it or email it to someone else. Copy/pasting from a command prompt is not done in the standard way, so I don't want people to have to copy/paste from there. Saving the file to disk is possible, but the folder where the tool is located may not have access rights so the user would have to configure the output file location (this may be too tricky for some users). I was thinking of launching notepad with some text in it, generated from the command line tool. Is this possible? Any other suggestions?

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• SQL Server database with clustered GUID PKs - switch clustered index or switch to sequential (comb)

  - by Eyvind

  We have a database in which all the PKs are GUIDs, and most of the PKs are also the clustered index for the table. We know that this is bad (due to the random nature of GUIDs). So, it seems there are basically two options here (short of throwing out GUIDs as PKs altogether, which we cannot do (at least not at this time)). We could change the GUID generation algorithm to e.g. the one that NHibernate uses, as detailed in this post, or we could, for the tables that are under the heaviest use, change to a different clustered index, e.g. an IDENTITY column, and keep the "random" GUIDs as PKs. Is it possible to give any general recommendations in such a scenario? The application in question has 500+ tables, the largest one presently at about 1,5 million rows, a few tables around 500 000 rows, and the rest significantly lower (most of them well below 10K). Furthermore, the application is installed at several customer sites already, so we have to take any possible negative effects for existing customer into consideration. Thanks!

  Read the article

• MS SQL Database with clustered GUID PKs - switch clustered index or switch to sequential (comb) GUID

  - by Eyvind

  We have a database in which all the PKs are GUIDs, and most of the PKs are also the clustered index for the table. We know that this is bad (due to the random nature of GUIDs). So, it seems there are basically two options here (short of throwing out GUIDs as PKs altogether, which we cannot do (at least not at this time)). We could change the GUID generation algorithm to e.g. the one that NHibernate uses, as detailed in this post, or we could, for the tables that are under the heaviest use, change to a different clustered index, e.g. an IDENTITY column, and keep the "random" GUIDs as PKs. Is it possible to give any general recommendations in such a scenario? The application in question has 500+ tables, the largest one presently at about 1,5 million rows, a few tables around 500 000 rows, and the rest significantly lower (most of them well below 10K). Furthermore, the application is installed at several customer sites already, so we have to take any possible negative effects for existing customer into consideration. Thanks!

  Read the article

• Does an unmanaged 4/8-port GBit Ethernet switch with a GBIC port exist?

  - by Aaron Digulla

  I'm looking for a simple unmanaged switch with 4-8 GBit Ethernet ports and a fiber port (either as a GBIC slot or pre-installed with a 1000BASE-SX port). Does something like that exist? [EDIT] I want to connect to places in my home without drilling large holes though the floors. Therefore, I'm looking for a cheap way to connect two GBit switches via fiber. I tried with a media converter (GBit <- multimode fiber) but that costs about 50% throughput. So I was hoping that there is a cheap, small GBit switch which has a GBIC slot). All I found so far are very expensive managed switches with 12 or 24 ports for industry use.

  Read the article

• How to switch off the monitor when mouse reaches the edge of the screen?

  - by evgeny9

  I have 2 computers at home (Windows XP and Windows 7), but one monitor for both of them. They are connected to this monitor using different interfaces: DVI and VGA. I'm also using one keyboard and one mouse to control both PCs with the help of Synergy or Input Director. But I still need to manually switch between monitor interfaces. I wonder, if there's some way (software) that will switch this interfaces (turn off the monitor), when reach the edge of the screen with the mouse. Until now I found several answers, which help to avoid pressing hardware buttons, but still can not do the job automatically based on mouse pointer coordinates. Thank you.

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >