Search Results

Search found 926 results on 38 pages for 'crashing'.

Page 28/38 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Win7 System folder contains infinitely looping SYSTEM(!) directory

  - by Matt

  My Windows 7 Enterprise computer has been crashing fairly frequently recently, so I decided to boot up in safe mode and run the TrendMicro client I have installed. It froze about 10 minutes into the full system scan, so in the spirit of http://whathaveyoutried.com, I started scanning each folder individually. When I got to ProgramData, the AV failed with an uncaught exception. I then went down a level and tried scanning Application Data, which failed as well. Imagine my surprise when I open the folder just to see the same folder again! As far as I can tell, this folder loop continues indefinitely. (If you are trying to recreate this, keep in mind that ProgramData is a hidden folder.) I'm actually a bit concerned that these are system folders, as this is a brand-new computer with a clean installation. I guess I have three questions: Has anyone else seen/experienced this before? I'm running Win7 SP1. How do I fix this? I've run CHKDSK \F with no success (although it was incredibly slow). What are the ramifications of an infinitely recursive directory? Theoretically speaking, each link takes up memory, so shouldn't I have no space available on my hard drive? (I've got about 180GB left.) I noticed that the tree view on the left only shows the "linked folder" icon on the deeper folders--does this mean anything special? (I've circled the icons or lack thereof in red.) How can the OS even resolve this aberration? And above all, what would happen if I were to select "Expand all folders"??? :P Matt

  Read the article

• Windows Server 2008 R2 Finding Hidden files that are causing drive to fill up

  - by Xaxum

  What is the best way to find out what files are sucking up so much space? My Windows directory lists its size as 15 GB but when I run a powershell script against it, it shows 40 GB. It seems 40 GB is about right because if I use that 40 GB and add it to the rest of my folders on C I get the 45 GB that is in use. I checked volume shadow copy and that is disabled and there are no volume shadow files listed. My page file is limited to 3 GB. How can I find out what files are taking 25 GB of space? Final Results: We ended up disabling UAC and then the Properties showed the true file size of the Windows folder, as shown in powershell script. This allowed us to drill down to the folder that had the issues... In our case it was in C:\Windows\System32\config\systemprofile\AppData\Local\VMware\VDM there were several large dump files, these were the mysterious unknown files in WinDirStat. It turns out our nessus scan is crashing a view service for a couple seconds so it creates a large dump file. So we will try this.. https://discussions.nessus.org/thread/5212

  Read the article

• How to log kernel panics without KVM

  - by Spacedust

  My server is crashing and I can't find an answer why. It all started after my datacenter upgrade RAM from 16 GB to 32 GB. I also found such logs in dmesg - they've started to show itself just before the first kernel panic: EXT4-fs error (device md2): ext4_ext_find_extent: bad header/extent in inode #97911179: invalid magic - magic 5f69, entries 28769, max 26988(0), depth 24939(0) EXT4-fs error (device md2): ext4_ext_remove_space: bad header/extent in inode #97911179: invalid magic - magic 5f69, entries 28769, max 26988(0), depth 24939(0) EXT4-fs error (device md2): ext4_mb_generate_buddy: EXT4-fs: group 20974: 8589 blocks in bitmap, 54896 in gd JBD: Spotted dirty metadata buffer (dev = md2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. EXT4-fs error (device md2): ext4_ext_split: inode #97911179: (comm pdflush) eh_entries 28769 != eh_max 26988! EXT4-fs (md2): delayed block allocation failed for inode 97911179 at logical offset 1039 with max blocks 1 with error -5 This should not happen!! Data will be lost EXT4-fs error (device md2): ext4_mb_generate_buddy: EXT4-fs: group 21731: 5 blocks in bitmap, 60762 in gd JBD: Spotted dirty metadata buffer (dev = md2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. My system is CentOS 5.8 64-bit with latest kernel 2.6.18-308.20.1.el5. How can I check what is the reason of kernel panic without having an access to the KVM ? I have told my datacenter admins to check the memory in the server.

  Read the article

• Server Crash Diagnosis...Are there any 'black box recorder' style programs available.

  - by columbo

  My redhat server is crashing every three weeks or so at 4:15am ish on Sunday mornings. (well it was sundays the last two have been Thursday mornings at 4:15ish) Looking at the logs (mysql, httpd, messages) there are no clues as to why. They just seem to stop. I ran a little script to take memory readings every 15 minutes and it too stops (with normal readings) at this time. The server is remote at a provider so I can only access it via the web. I use Plesk. It appears to be a set job or something that is causing the issue. I can see nothing in crontab. So my question is...has anyone else had this and can offer advice? Failing that. Does any one know of a way to get more detailed logging than that offered by the messages file? I was thinking of a black box style recording program or maybe something as simple as an option somewhere to increase the level of reporting in the messages log. Thanks

  Read the article

• Reliable backup software for windows network/samba shares.

  - by Eli

  Hi All, I have a Win2003 server that works as a pdc for a number of XP boxes, and a couple related FreeBSD boxes. I need to back up roaming profiles, non-roaming profiles via network shares, local hard drive data, and files on the FreeBSD boxes via samba shares. I have tried Genie Backup Manager and Backup4All pro, and both have excellent features, but both also begin to fail disastrously with more than a few days use. Mostly, the errors seem to have been from the backup catalog getting out of synch with itself. Whatever it is, there is no excuse for a backup software that says it backed up files when it really didn't, or the log saying it backed up exactly the same file 10,000 times in a single run, or flat-out crashing, or any of the other myriad problems I've run into with these. Really sad for products that fill such an important need. Anyway, does anyone know of a backup software that works reliably and can do the following? Scheduled backups for multiple jobs, without a user logged in. Backup from local hard drives or network shares. Incremental backups. Thanks! Edit: Selected solution: I've added my (hopefully final) solution as an answer.

  Read the article

• Small business server 2011 standard - applications randomly closing for remote desktop users

  - by Ash King

  Small business server 2011 standard - applications randomly closing for remote desktop users I have an issue where when you are connected through remote desktop (doesn't matter whether you have administrative rights or not). What happens: Any application that you run (outlook, word, excel, notepad, cmd etc..) the application will randomly crash and produce an error as such: Faulting application name: EXCEL.EXE, version: 14.0.6112.5000, time stamp: 0x4e9b2b30 Faulting module name: ieframe.dll, version: 8.0.7600.16930, time stamp: 0x4eeb0187 Exception code: 0xc0000005 Fault offset: 0x0000000000131e03 Faulting process id: 0x3d4c Faulting application start time: 0x01cecf3491388e43 Faulting application path: C:\Program Files\Microsoft Office\Office14\EXCEL.EXE Faulting module path: C:\Windows\System32\ieframe.dll Report Id: 1c06abd4-3b2b-11e3-bd8d-001999b270e9 I noticed the ieframe.dll, but its not constant for every application that crashes, e.g.: Faulting application name: OUTLOOK.EXE, version: 14.0.6109.5005, time stamp: 0x4e79b6c0 Faulting module name: PSTOREC.DLL_unloaded, version: 0.0.0.0, time stamp: 0x4a5be02a Exception code: 0xc0000005 Fault offset: 0x000007fef39c7158 Faulting process id: 0x43f8 Faulting application start time: 0x01cecf33fe5eec26 Faulting application path: C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE Faulting module path: PSTOREC.DLL Report Id: 0c0f5934-3b2b-11e3-bd8d-001999b270e9 I am unable to perform a sfc /scannow command due to the cmd.exe crashing as well.. I have performed a virus scan on the server which did originally pick up 5 viruses: riskware.tool.ck -> File riskware.tool.ck - > Memory Process trojan.agent.bdavgen -> File trojan.agent -> File HiJack.comsysapp -> Registry Data But after removing these and rebooting the machine we have had no luck Has anyone else ever come across this issue before? Also to elaborate it is happening as frequently as every minute.

  Read the article

• CPU temperatures high on new build after gaming

  - by Reznor

  My friend had a problem with his computer a while back. His games were crashing, even within the menus. He was stumped as to what the problem was, so I posted on here requesting help. He found out the day later, when his computer would start up but wouldn't display anything on the screen. His video card must have came screwed up. So, he got a replacement. Now, there's a new problem. His temperatures, which were acceptable before, are now insanely high. His GPU temperature runs 70-80c, which is understandable considering he's running his games maxed out, but the real problem here is his processor and motherboard temperatures. All four of his cores are running at 88-90c after coming out of a game. His motherboard temperature was also 70c at one point. In terms of cooling, his case should definitely be adequate. He has an Antec Twelve Hundred. He's using stock fans. The cable management in his case is very good; better than average. He's using the stock heatsink with the processor too, but note, it was fine before the replacement, so it isn't like there's some inherent problem. He has checked the case too. Everything's fine! No cables in the way. The heatsink is seated properly. He turned his case fans up to high, as well, but the temperatures are persisting. Could the processor be overheating due to running games maxed out? Any ideas?

  Read the article

• Weird problem with Visual C++ 2010 Express

  - by Robert Vella

  This has happened before on my Vista Premium installation, and now it's happening on my Windows 7 Home Premium installation. Basically everytime I install Visual Studio Express 2010, it works fine for a random amount of time but then suddenly starts to hide from my sight -- that's the best way I can explain it. VS does not crash, and from what I can tell it does not freeze either; It continues to work, I can even "minimize" and "maximize" it; I simply cannot see it nor can I interact with it any meaningful way. Also: After the "crash" there are no logs in: Root\Program Files (x86)\Microsoft Visual Studio 10.0\Microsoft Visual C++ 2010 Express - ENU. Nor any other files created at the time of the crash. There are no traces in the event viewer. The program seems to be functioning perfectly in the process manager. If I reinstall Visual C++, it works normally for a seemingly random period of time before going cookoo again. I am stumped. This has never happened to me before, with any other program. And yet I doubt it really is a problem with Visual C++; More like something general that seems to have picked on it for some reason. Still, after a clean install with a new OS, I'm kinda thinking there's something wrong here. Any help would be appreciated, altough I suspect that the answer to this question will make me feel embarassed. P.S. Not sure if it helps, but I think around the same time I started having problems (On both installations) with windows turning off the display when I leave the computer, and then seemingly crashing when it turns it on again -- in fact when I interact with it it seems to be responding to my commands without actually display anything.

  Read the article

• Power Outage Interrupted Upgrade from Windows Vista Ultimate to 7 Ultimate, Reverted to Vista, Now Vista is failing... What Next?

  - by tednewk

  I was in the midst of what seemed to be a successful upgrade from Vista Ultimate to 7 Ultimate when there was a brief blackout. The upgrade failed and Windows reverted back to Vista. Now Vista is very slow to boot, has problems waking back-up from inactivity and quickly loses it's wireless connection. The wake-up problem manifests itself as the mouse is clearly shown on a black screen but I have no access to the Desktop or Taskbar or Explorer. Even Alt-Ctrl-Delete doesn't seem to work. No task menu, no reboot. Hitting the reset button reboots the machine with the usual Black Screen warnings offering Safe Mode. I tried to do a system restore to a point before the upgrade. That didn't seem to work. My guess is that my system is a mutant with parts of Vista and parts of 7 crashing each other. I would like avoid a clean install if at all possible to avoid reinstalling other software. What should I try now? My thoughts are: My a system back-up to lock the computer in place Trying a second 7 upgrade If that appears to be working make another back-up If not reload back-up and try a repairing Vista from DVD. If that appears to work make another back-up, let system stablize about a week then try 7 install again If that doesn't work are there any other options to try before settling for a clean install? Another complication, I am doing this by "remote control". I'm traveling with my job and I'll be talking my son through it over the phone. (Kind of like the landing the 747 cliche from all the 70's adventure shows!) So is there a way of simplifying the steps? Thanks Ted

  Read the article

• All FireFTP passwords gone after auto-update

  - by GitaarLAB

  For the last six months (since the Firefox madness started and they keep on taking control of my PC) I'm terrified to touch Firefox. Problem is however, I've been using it in my business (since once upon a time it was a trustworthy application with useful extensions like FireFTP) and that installation (and plugins) holds four years of information. So Firefox continually deletes my important data (by) messing up (or blocking/or worse: auto-updating) my plug-ins, even crashing my computer as a result. Today Firefox killed FireFTP by (again) autoupdating FireFTP without my permission, and I did my best to disable that nonsense in about:config). Result: none of the (over 100) FireFTP accounts can be logged on to, they suddenly all ask for a password. I do not have the time to to find all of the passwords and reconfigure FireFTP again. How can I undo the mess Firefox created once again? That is, where are the passwords, how do I downgrade? As a side-question, how can I make Firefox behave again? I'm the boss of my computer, not them! How can I once and for-all take back control and completely kill every kind of auto-update feature?

  Read the article

• HAProxy crashes on all requests in 1.5-dev12

  - by Daniel Hough

  I'm having an issue where HAProxy is crashing with no explanation when I switch from 1.4.12 to 1.5-dev12. The reason I'm switching is for the SSL offloading. My config file doesn't have any errors, it's quite simple and it works well with 1.4 - but for some reason when I run it with 1.5-dev12 I see the logs noting that the two backends I have have been set up, and then when I hit one of the frontends, I get an HTTP 400 in the browser and suddenly HAProxy isn't running anymore when I check. I understand that a common workaround to the lack of SSL support for HAProxy is to use Stud, and I may go with that since I am in need of an SSL solution for my service, but before I dele into that world I thought I might see if anybody has experienced the same problems and might know how to fix it. The server is Ubuntu 10.04 and I followed the make instructions on the Exceliance blog here. EDIT: On the advice of Kyle Brandt, I did a bit more investigation. I attached gdb to the haproxy process and when the crash occurred this is what I got: Program received signal SIGSEGV, Segmentation fault. 0x0804e5c2 in dequeue_all_listeners (list=0x9e1a418) at src/protocols.c:184 184 list_for_each_entry_safe(listener, l_back, list, wait_queue) { P.S. HAProxy is awesome, so thank you Exceliance for providing us with something so useful :)

  Read the article

• Drive letter not appearing after heat-related crash

  - by NickAldwin

  I recently had my old PC (has 3 physical hard drives partitioned into 6 partitions) off while on vacation. When I came back, I turned it on. I hadn't realized the room was warmer than it usually is due to hot weather while I was away. The computer was extremely slow to start up, then it crashed. When i rebooted, it got halfway through chkdsk on one of the non-system partitions, then crashed again. I opened it up and felt the hard drives and immediately shut down the computer and moved it to my basement to cool down because it was so hot. I left it there for a length of time while I reinstalled the A/C. I have now turned it on again. It is working fine, and every drive except for the one with the partition that was being checked has appeared in Windows. I scheduled chkdsk for all of the other partitions anyway, just in case, but I'm worried about that drive. I'm pretty sure the drive itself hasn't broken but that crashing in the middle of a chkdsk repair may have corrupted the data. What would you do in this situation? Most of the data on that drive was backed up, so it's not a huge deal if I lost it, but I'd like to get it back if I could. I also would love to regain usability of the drive, even if I have to wipe it -- but that's a last-resort sort of thing. What do you suggest I do?

  Read the article

• Nginx: Loopback connection via PHP's getimage size crashes server (Magento's CMS)

  - by Alex

  We were able to trace down a problem that is crashing our NGINX server running Magento until the following point: Background info: Magento Backend has a CMS function with a WYSIWYG editor. This editor loads some pictures via a controller in magento (cms/directive). When we set the NGINX error_log level to info, we get the following lines (line break inserted for better readability): 2012/10/22 18:05:40 [info] 14105#0: *1 client closed prematurely connection, so upstream connection is closed too while sending request to upstream, client: XXXXXXXXX, server: test.local, request: "GET index.php/admin/cms_wysiwyg/directive/___directive/BASEENCODEDIMAGEURL,,/ HTTP/1.1", upstream: "fastcgi://127.0.0.1:9024", host: "test.local" When checking the code in the debugger, the following call does never return (in ´Varien_Image_Adapter_Abstract::getMimeType()` # $this->_fileName is http://test.local/skin/adminhtml/base/default/images/demo-image-not-existing.gif` # $_SERVER['REQUEST_URI'] = http://test.local/admin/cms_wysiwyg/directive/___directive/BASEENCODEDIMAGEURL list($this->_imageSrcWidth, $this->_imageSrcHeight, $this->_fileType, ) = getimagesize($this->_fileName); The filename requests is an URL to the same server which is requesting the script a link to a static .gif that is not existing. Sample URL: http://test.local/skin/adminhtml/base/default/images/demo-image-not-existing.gif When the above line executed, any subsequent request to the NGNIX server does not respond any more. After waiting for around 10 minutes, the NGINX server starts answering requests again. I tried to reproduce the error with a simple test script that only calls getimagesize() with the given URL - but this not crash. It simple leads to an exception saying that the URL could not be loaded (which is fine as the URL is wrong)

  Read the article

• Gaming blew fuse: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

  Read the article

• Computer not finding hard drives on boot -sometimes-

  - by todd.pund

  Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

  Read the article

• Why do I get swap space related errors when I still have lots of free memory in Solaris 10?

  - by Tom Duckering

  I am seeing a few of my services suffering/crashing with errors along the lines of "Error allocating memory" or "Can't create new process" etc. I'm slightly confused by this since logs show that at the time the system has lots of free memory (around 26GB in one case) of memory available and is not particularly stressed in any other way. After noting a JVM crash with similar error with the added query of "Out of swap space?" it made me dig a little deeper. It turns out that someone has configured our zone with a 2GB swap file. Our zone doesn't have capped memory and currently has access to as much of the 128GB of the RAM as it need. Our SAs are planning to cap this at 32GB when they get the chance. My current thinking is that whilst there is memory aplenty for the OS to allocate, the swap space seems grossly undersized (based on other answers here). It seems as though Solaris is wanting to make sure there's enough swap space in case things have to swap out (i.e. it's reserving the swap space). Is this thinking right or is there some other reason that I get memory allocation errors with this large amount of memory free and seemingly undersized swap space?

  Read the article

• Recovering data from an external hard drive

  - by CCallaghan

  I have a WD Elements 2GB hard drive (formatted NTFS). I accidentally kicked out the USB cable while writing data to the disk, and now I can't access most of the data. Although this was ostensibly my backup drive, there is a great deal of important material on there which was only on there. I realise how idiotic this makes me. (So, formatting is not an option.) Things I've tried/information I've gathered: Windows Explorer will recognise the drive itself. However, it will not access most directories therein (and will sometimes crash when exploring). I can access all of the directories through the command line, but the dir command will often report that it can't read any files in most of the directories. The situation was similar when I hooked it up to an Ubuntu machine: the file explorer crashed, but I could access directories - but not files in those directories - via terminal commands. Several files I tried to copy out either resulted in an I/O error being reported or resulted in the command line crashing. The Disk Management utility on Windows reports a healthy disk formatted as NTFS and not RAW. It also indicates the correct amount of space used up and its capacity (so it seems that the files are not deleted). I've tried to run chkdsk, but that hangs on Step 2 (checking indexes) at 74%. Step 1 reported no bad sectors. I tried Recuva, but that didn't seem to work (stalled at 0% for half an hour). I should also note that the disk doesn't seem to be spinning smoothly; it seems to be chopping back, like it's reading the same sector over and over again. I noticed this after I kicked out the cable. Any help would be greatly appreciated. Update: It would seem the problem has taken a turn for the worse. The external hard drive now shows up on my computer as a local disk and is not mountable by Linux.

  Read the article

• Experience with asymmetrical (non-identical hardware) SQL Server 2005 / Win 2003 cluster

  - by user24161

  I am reasonably good at dealing with SQL Server clusters; I am wondering if folks have experience, good or bad, using a mix of different models of servers from the same vendor in one SQL 2005 cluster. Suppose: I have one more powerful, more RAM, more shizzle box and one less powerful, less memory, less shizzle box bound together in a 2-node cluster. These would be HP DL380 and 580 machines (not that it should matter) I understand AND automate the process of managing memory for each SQL instance, so there's no memory contention when SQL instances fail over. Basically I am thinking a CLR proc will monitor the instances and self-regulate memory caps on each instance, so that they won't page or step on one another. I get the fact the instances might be slower and or under memory pressure if they share a "lesser" node, and that's OK. The business can deal with a slower instance in a server-problem scenario. Reasonable? Any "gotchas" to watch out for? More info 10/28: doing some experiments with a test cluster I find that reconfiguring max/min memory is OK PROVIDED the instance isn't already under memory pressure. If I torture the system with a huge query that demands a big chunk of RAM, and simultaneously adjust the memory allocation to a smaller value than what is being actively used, it's possible to run the instance out of memory and have it halt and restart itself (unhappy situation). Many ugly out-of-memory messages in the error log, crashing, burning... It's an extreme case, but good to know. Seems, then, that it would only be really safe to set this on startup of the instance, as in have a startup script that says "I am on node1, so my RAM settings are X or I am on node two, so they are Y," like this: http://sqlblog.com/blogs/aaron_bertrand... Update: I am testing a SQL Agent + PowerShell solution described in more detail here.

  Read the article

• Computer is dying--what should I be looking for?

  - by Will

  Okay, I'm a bit knowledgeable with pooters and such, but i'm confused. My computer is dying slowly, and I'm not sure what part is causing this. Computer details: Vista, dell machine, intel Q6600, 2.4 Core Duo (quad core), standard memory and drive (unknown manufacturer). Symptoms: I would best describe the symptoms as memory corruption. After a couple days on, I start getting applications crashing or failing to open for a lack of "resources". Sounds are corrupted. Onscreen text gets corrupted; the characters of text are garbled, not the pixels on the screen. Video memory seems untouched as I haven't seen any misplaced pixels. Recently I've lost files on disk. I've also experienced errors reporting a supposed lack of disk space, even though I have fifty gigs free. There was one point where I couldn't get to the POST when booting up. After I cleaned everything (see next) this hasn't happened. Diagnostic steps: First thing I did was clean the case. There was a lot of dust buildup on heatsinks, so I cleaned all that up. No help. Next, I disconnected and reconnected everything, from power cables to memory (did not reseat cpu). No change. Last, I ran the standard vista memory diagnostics and ran checkdisk. Both reported no errors found. I have not run any POST tests, now that I think about it. I'm at a loss at this point. Disk appears fine, memory too. I'd expect motherboard issues to result in the thing not booting up, yet it does every time. What should I be looking at? What more can I do?

  Read the article

• Nvidia GTX 660m crashes games

  - by dcap

  I just recently bought a Lenovo y580 with both HD intel graphics and an Nvidia GTX 660m. It works great except for one thing: playing games. Every time I load a game, either with Steam or Games for Windows Live, games will end up crashing. I've already talked with lenovo tech support and they couldn't help other than send my new laptop for repair which would take 7 days. So before I do that I thought I'd ask around. These are the games I've tested and what happens when they load: Civilization V: Game loads fine but once it gets loaded to the game, there's noticeable "tearing" popping up and certain things flash. Within a minute of this, the game crashes. Does the same thing regardless if Vsync is on or off. Total War Shogun2: Game gets to the menu screen. The background of the menu screen shows what is expected - slideshow of in-game environments rendered on high settings (this is expected). However, within 2 seconds of the menu loading up it crashes. Age of Empires 3 (Non-steam): This game is several years old so it should work on this brand new laptop fine. However the results are similar to that of Civilization V. Noticeable "Tearing" and after a few seconds it'll freeze/crash. I've done tests on all these games with both the latest stable Nvidia driver 285 as well as the nightly build 307. In addition, Nvidia control panel is set on using the dedicated graphics card for all programs. So is there anything I can do to fix this or will I have to send it back for a week to tech support?

  Read the article

• Windows 7 clean install becomes corrupt after reboot (repeated many fresh installs)

  - by pjotr_dolphin

  My laptop keeps crashing on boot after clean Windows 7 install. Ok, here is the story, and some fact. Computer: Samsung NP900X3C-A04HK (256GB SSD, 8GB RAM) OS to install: Windows 7 Ultimate SP1 (not from Samsung, own fresh Win) I purchased this laptop about a year ago, never booted it into the Windows Home that was installed on it, installed directly Ubuntu on the machine. Full disc encryption was the selected install, so of course it wiped the complete disc (including Samsung Recovery Partition). After some time, I felt like going back to Windows, as Windows 7 is actually quite nice. So I went to buy a fresh Windows 7Ultimate with SP1. Now to the tricky part. Windows installs perfectly, and after installing all Windows updates, drivers from Samsung, software I need, it is time for shutting it down and go to bed. Starting it up again, and it is not booting, these are the type of errors I have gotten so far (fresh installed it more then a dozen times now, and tried different suggestions from threads on the net). Windows failed to start... Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. File: /boot/bcd Status: 0xc000000f Info: an error occurred while attempting to read the boot configuration data. And some other errors, not all the same. Not memory of this. I have run different disc checks, and all says my SSD is in perfect shape. Note: Soft reboots from Windows menu works, never gets corrupted. But if I Shutdown and then start it up again, this is when it happens. Can someone help me not get back to Ubunut? What can be the cause, and how can it be fixed so I do not get there problems again?

  Read the article

• Diagnosing PC crashes (most often while using shared folders or torrents)

  - by Dyppl

  For the last few weeks my PC (pretty old P4 with WinXP SP3) has been crashing randomly. It just suddenly reboots instanteneously. It feels hardware-related but I wasn't able to determine wether it's software or hardware that causes it. I did notice a pattern though: it's more likely to crash when I copy a lot of files over network or have uTorrent running, but sometimes it crashes when I am not doing anything with it. Copying files from it over network causes it to crash in 1 to 10 minutes almost every time. Using torrents causes it to crash every 1-3 hours. With neither or that on it crashes every 24 hours or so. I ruled out the following probable causes: PSU (I bought a new one and turned off most of the drives so the power is sufficient 100%) Bad HDD or interface cable on my SATA disk from which I was originally copying the data over network (bought new SATA cable and later yanked out the HDD completely, PC still crashes without it) Video adapter (AGP slot is now empty, using the onboard VGA at the moment) Network adapter (removed it from PCI, using onboard LAN) CPU (I think: I changed the termopaste and it's temperature is below 50C) RAM (I think: I ran Memtest86 and it didn't show any errors) At the moment I only have only one system HDD and DVD drives, a mouse and a keyboard plugged in. The fact that it crashes most often when I use network extensively makes me think that maybe it's software related (I removed the network adapter from PCI and now am using an onboard one, so network hardware is unlikely to cause problems). I am now pondering system reinstall but it's not a pleasant solution so I decided to ask wether there are better ideas first. If someone can share a good diagnostic tool it would be great because I didn't find anything good. Thanks in advance, I hope that "help to diagnose" questions aren't entirely banned here. EDIT: Motherboard is actually ~4 years old as I replaced it back in 2007

  Read the article

• Programmatically creating scrollview(s) from custom component in android

  - by jaapbeetstra

  I'm trying to build a compound control in Android, containing (among other things) a ScrollView. Things go wrong when I try to view the control in Eclipse, crashing with a NullPointerException after the error message: "Parser is not a BridgeXmlBlockParser". Stacktrace: java.lang.NullPointerException at android.view.View.<init>(View.java:1720) at android.view.ViewGroup.<init>(ViewGroup.java:277) at android.widget.FrameLayout.<init>(FrameLayout.java:83) at android.widget.ScrollView.<init>(ScrollView.java:128) at android.widget.ScrollView.<init>(ScrollView.java:124) at android.widget.ScrollView.<init>(ScrollView.java:120) at my.compound.control.StringPicker.onMeasure(StringPicker.java:46) ... I've traced the error to the following conditions: The NPE is thrown because a Context.obtainStyledAttributes() call returns null when the attrs argument passed is null. This only applies to the BridgeContext implementation used in Eclipse, which expects attrs to be an instance of the BridgeXmlBlockParser. The attrs argument is null because I create the ScrollView using the (Context) constructor. There is a workaround of course, which is passing the attrs I receive when Eclipse constructs the compound control, but I don't want all the attributes set on the compound control to apply to my inner control. Am I doing something wrong, is this a bug in Android Eclipse, ...?

  Read the article

• New HandleProcessCorruptedStateExceptions attribute in .Net 4

  - by Yaakov Davis

  I'm trying to crash my WPF application, and capture the exception using the above new .Net 4 attribute. I managed to manually crash my application by calling Environment.FailFast("crash");. (Also managed to crash it using Hans's code from here: http://stackoverflow.com/questions/2950130/how-to-simulate-a-corrupt-state-exception-in-net-4). The app calls the above crashing code when pressing on a button. Here are my exception handlers: protected override void OnStartup(StartupEventArgs e) { base.OnStartup(e); AppDomain.CurrentDomain.FirstChanceException += CurrentDomain_FirstChanceException; AppDomain.CurrentDomain.UnhandledException += CurrentDomain_UnhandledException; DispatcherUnhandledException += app_DispatcherUnhandledException; } [HandleProcessCorruptedStateExceptions] void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e) { //log.. } [HandleProcessCorruptedStateExceptions] void CurrentDomain_FirstChanceException(object sender, System.Runtime.ExceptionServices.FirstChanceExceptionEventArgs e) { //log.. } [HandleProcessCorruptedStateExceptions] void app_DispatcherUnhandledException(object sender, System.Windows.Threading.DispatcherUnhandledExceptionEventArgs e) { //log.. } The //log... comment shown above is just for illustration; there's real logging code there. When running in VS, an exception is thrown, but it doesn't 'bubble' up to those exception handler blocks. When running as standalone (w/o debugger attached), I don't get any log, despite what I expect. Does anyone has an idea why is it so, and how to make the handling code to be executed? Many thanks, Yaakov

  Read the article

• I can't understand this issue java.lang.IndexOutOfBoundsException.

  - by praveenb

  I've strange issue, that My application is working fine on some devices, But its crashing one of the client device(on Galaxy Nexus 4.1.1 v) at app starting screen. I get this stack trace from ACRA report. java.lang.IndexOutOfBoundsException at android.graphics.Paint.getTextRunAdvances(Paint.java:1731) at android.graphics.Paint.getTextRunAdvances(Paint.java:1704) at android.text.MeasuredText.addStyleRun(MeasuredText.java:164) at android.text.MeasuredText.addStyleRun(MeasuredText.java:204) at android.text.StaticLayout.generate(StaticLayout.java:281) at android.text.DynamicLayout.reflow(DynamicLayout.java:284) at android.text.DynamicLayout.(DynamicLayout.java:170) at android.widget.TextView.makeSingleLayout(TextView.java:5843) at android.widget.TextView.makeNewLayout(TextView.java:5741) at android.widget.TextView.onMeasure(TextView.java:6098) at android.view.View.measure(View.java:15172) at android.widget.LinearLayout.measureVertical(LinearLayout.java:833) at android.widget.LinearLayout.onMeasure(LinearLayout.java:574) at android.view.View.measure(View.java:15172) at android.widget.RelativeLayout.measureChildHorizontal(RelativeLayout.java:617) at android.widget.RelativeLayout.onMeasure(RelativeLayout.java:399) at android.view.View.measure(View.java:15172) at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:4814) at android.widget.FrameLayout.onMeasure(FrameLayout.java:310) at android.view.View.measure(View.java:15172) at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:4814) at android.widget.LinearLayout.measureChildBeforeLayout(LinearLayout.java:1390) at android.widget.LinearLayout.measureVertical(LinearLayout.java:681) at android.widget.LinearLayout.onMeasure(LinearLayout.java:574) at android.view.View.measure(View.java:15172) at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:4814) at android.widget.FrameLayout.onMeasure(FrameLayout.java:310) at com.android.internal.policy.impl.PhoneWindow$DecorView.onMeasure(PhoneWindow.java:2148) at android.view.View.measure(View.java:15172) at android.view.ViewRootImpl.performMeasure(ViewRootImpl.java:1848) at android.view.ViewRootImpl.measureHierarchy(ViewRootImpl.java:1100) at android.view.ViewRootImpl.performTraversals(ViewRootImpl.java:1273) at android.view.ViewRootImpl.doTraversal(ViewRootImpl.java:998) at android.view.ViewRootImpl$TraversalRunnable.run(ViewRootImpl.java:4212) at android.view.Choreographer$CallbackRecord.run(Choreographer.java:725) at android.view.Choreographer.doCallbacks(Choreographer.java:555) at android.view.Choreographer.doFrame(Choreographer.java:525) at android.view.Choreographer$FrameDisplayEventReceiver.run(Choreographer.java:711) at android.os.Handler.handleCallback(Handler.java:615) at android.os.Handler.dispatchMessage(Handler.java:92) at android.os.Looper.loop(Looper.java:137) at android.app.ActivityThread.main(ActivityThread.java:4745) at java.lang.reflect.Method.invokeNative(Native Method) at java.lang.reflect.Method.invoke(Method.java:511) at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:786) at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:553) at dalvik.system.NativeStart.main(Native Method) Im seeing above stack trace. I'm unable to understand the issue. Please help me on tacking the issue. Thank you.

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >