Search Results

Search found 3279 results on 132 pages for 'digital photos'.

Page 28/132 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Rosewill RSV-S5 and it's transferespeeds

  - by DoomStone

  I have just bought a Rosewill RSV-S5, I have installed 5x1,5Tb Western Digital Green disks in it. After that have I created a Raid5 on them all with the software that followed with the hardware. Not the raid it self works fine, but it is SLOW, I can only obtain a maximum of 25 MB/s, and if SABnzbd+ is downloading with 5 MB/s is it having a hard time streaming a normal DIVX (700 mb) movie. Is this normal or is there something wrong? Edit: should be able to handle 3 Gbps = 384 megabytes / second Edit 2: As you can see am I only downloading with 3,76 MB/s and I'm trying to watch V s02e08 (720p), but it is completely unwatchable, as I can see 30 sec, and the it buffers for 20 sec. Edit: Other information there might be required I'm running Windows Server 2008 R2, optimized for program performance. Windows is installed on a 60GB SSD. I have a 50 Mb/s internet connection and a 1 Gb/s LAN, all connected with Cat6 Ethernet cables. The MCE is using a Gigabyte EP35C-DS3R motherboard with 2 GB DDR2 ram. Edit 3: I have used chunk sizes for 128 KB Edit 4: I found this on newegg Pros: Enclosure for 5x2TB hard drive is fine. This is basically a rebranded San Digital TR5M-B product. For support Rosewill tells you to contact San Digital. No direct support from Silicon Image for the computer raid card. Cons: Includes computer Silicon Image 3132 raid card, extremely slow raid 5 write (our tests ~10MB/s). Compare to regular internal local drive write 30-60MB/s. We basically dumped the Sil3132 card and replaced with High Point RocketRaid 622 card for extra $69.99. Note for RR622, turn off ECRC (end to end CRC check) for card to work on IBM xserver. What took 12hrs to copy now took 2-3hrs. San Digital realized the problem and has the newer model TR5M-BP TowerRaid Plus that comes with High Point RocketRaid 622 card. Rosewill should discontinue this product and go with TR5M-BP. Could not get Silicon Image raid management software to work with complicated 2008R2 server with 10 NICs, application doesn't know how to talk to localhost port with all those NICs. No updates from Silicon Image and support from San Digital ignored. Gave up on Sil3132 card. Save yourself from a lot of headaches, get the RR622 card too if you are going to buy this product. Other Thoughts: The newer model is TR5M-BP TowerRaid Plus, comes with High Point RocketRaid 622 raid card for the PC instead of Silicon Image Sil3132. According to San Digital, raid 5 performance for Sil3132 read 80MB/s write 19MB/s, and RR622 read 154MB/s write 149MB/s. Our RR622 tests gave (8TB raid 5) write ~80-110MB/s copying 40GB file took 8mins. So I have now ordered a HighPoint RocketRAID 622 2P ext SATA III and hopes that it will solve my problems.

  Read the article

• How do I prevent directories mounted with 'bind' from appearing on 'Devices' on nautilus?

  - by Can

  I have these lines in the fstab # binds /media/DataNtfs/Music /home/can/Music none rw,bind /media/DataNtfs/Pictures /home/can/Pictures none rw,bind /media/DataNtfs/Downloads /home/can/Downloads none rw,bind /media/DataNtfs/Documents /home/can/Documents none rw,bind /media/DataNtfs/Backups /home/can/Backups none rw,bind /media/DataNtfs/Notes /home/can/Notes none rw,bind /media/DataNtfs/Other /home/can/Other none rw,bind /media/DataNtfs/Packages /home/can/Packages none rw,bind /media/DataNtfs/Photos /home/can/Photos none rw,bind /media/DataNtfs/Videos /home/can/Videos none rw,bind /media/DataNtfs/WorkSpace /home/can/WorkSpace none rw,bind

  Read the article

• Perfect Cloud-based Photo Setup with digiKam and Piwigo

  <b>Linux Pro Magazine:</b> "Using digiKam's Kipi plugins, you can upload your photos to a variety of popular photo services, including Flickr, Picasaweb, and SmugMug. But what if you want to host your own photo album and still be able to populate it with photos directly from within digiKam?"

  Read the article

• Google Analytics and direct access

  - by user1592845

  Does Google analytics regards remote access resources as direct access? For example: Suppose: mysite.com and anothersite.com mysite.com has an image found at http://mysite.com/img/vip.jpg anothersite.com at some page of it like http://anothersite.com/photos.html included vip.jpg in its source in image tag: <img src="http://mysite.com/img/vip.jpg" /> So does Analytics regard loading this image when a visitor vists http://anothersite.com/photos.html to be a direct access for mysite.com?

  Read the article

• URL routing similar to Facebook (related to AJAX and the URL)

  - by Guilherme Cardoso

  In this article i'm gonna show you how i do when i have to update some content with AJAX and i have to change the URL. First, let's see an example to understand it better. If the user is reading a News with Id 1 and he clicked on another News with Id 2, if we update the content with AJAX the user is now reading the News Id 2 but the URL remains the same, for example: http://localhost/News/Read/1 Now let's see another example from Facebook. If i'm reading my profile and i click on Photos, Facebook updates it with AJAX and the URL switch to: http://www.facebook.com/guilhermegeek#!/guilhermegeek?sk=photos If we enter on that URL, it's mapped to: http://www.facebook.com/guilhermegeek?sk=photos The trick here is the parameters that we use after the #!. Those parameters are never sent to the server side, so we handle them on the client side (javascript).In the example of Facebook, he receives my profile name (guilhermegeek) and the action is to read photos. A few time ago i've written an article in my Portuguese blog explaining how to use an alternative to clients with javascript disabled. Like this: <a onclick="javascript:ReadNews(id);" href="#!News/Read/@id/">Title</a> When the user enter the link of that news, my function Read(); fills the News in the page. Then, i add the #!News/Read/@id/ to my URL. It's gonna stay something like this: http://localhost/News/Read/1#!News/Read/2 As i explained before, the News that the user is reading has the Id 2.The next step is to use javascript to check if the URL that the user typed has other News Id, because if we enter on the above URL our controller will get the Id 1 (everything after to the # isn't sent to the server side). $(document).ready(function () {             var h = window.location.hash;             if (h != null) {                 var parts = window.location.href.split('#!');                 if (parts.length > 1) {                     window.location.replace("http://localhost/" + parts[1]);                 }             }    }); It's pretty simple. I'm cutting everything after the #!, then i redirect the user to a new page. So, it's gonna stay:http://localhost/News/Read/2

  Read the article

• Image SEO - always repeat main keyword in alt text?

  - by Marcus Edensky

  I'm working on an Easter Island website and I'm currently redesigning my image system. Virtually all my photos are of Easter Island. My question is, should I always include the keywords "Easter Island" for Google to easier understand that my photos are from Easter Island, or is it sufficient that the "Easter Island" keywords are in the domain, as well as in all other pages of the site? For example, Alt text 1: "Moai statues at volcano Rano Raraku at Easter Island (Rapa Nui)" or Alt text 2: "Moai statues at volcano Rano Raraku" Would example 1 be considered keyword stuffing by Google

  Read the article

• Stuxnet - how it infects

  - by Kit Ong

  Except from the CNET article.http://news.cnet.com/8301-13772_3-57413329-52/stuxnet-delivered-to-iranian-nuclear-plant-on-thumb-drive/?part=propeller&subj=news&tag=linkvThe Stuxnet worm propagates by exploiting a hole in all versions of Windows in the code that processes shortcut files, ending in ".lnk," according to...[the] Microsoft Malware Protection Center....Merely browsing to the removable media drive using an application that displays shortcut icons, such as Windows Explorer, will run the malware without the user clicking on the icons. The worm infects USB drives or other removable storage devices that are subsequently connected to the infected machine. Those USB drives then infect other machines much like the common cold is spread by infected people sneezing into their hands and then touching door knobs that others are handling.The malware includes a rootkit, which is software designed to hide the fact that a computer has been compromised, and other software that sneaks onto computers by using a digital certificates signed two Taiwanese chip manufacturers that are based in the same industrial complex in Taiwan--RealTek and JMicron, according to Chester Wisniewski, senior security advisor at Sophos.... It is unclear how the digital signatures were acquired by the attacker, but experts believe they were stolen and that the companies were not involved.Once the machine is infected, a Trojan looks to see if the computer it lands on is running Siemens' Simatic WinCC software. The malware then automatically uses a default password that is hard-coded into the software to access the control system's Microsoft SQL database. The Stuxnet worm propagates by exploiting a hole in all versions of Windows in the code that processes shortcut files, ending in ".lnk," according to...[the] Microsoft Malware Protection Center....Merely browsing to the removable media drive using an application that displays shortcut icons, such as Windows Explorer, will run the malware without the user clicking on the icons. The worm infects USB drives or other removable storage devices that are subsequently connected to the infected machine. Those USB drives then infect other machines much like the common cold is spread by infected people sneezing into their hands and then touching door knobs that others are handling.The malware includes a rootkit, which is software designed to hide the fact that a computer has been compromised, and other software that sneaks onto computers by using a digital certificates signed two Taiwanese chip manufacturers that are based in the same industrial complex in Taiwan--RealTek and JMicron, according to Chester Wisniewski, senior security advisor at Sophos.... It is unclear how the digital signatures were acquired by the attacker, but experts believe they were stolen and that the companies were not involved.Once the machine is infected, a Trojan looks to see if the computer it lands on is running Siemens' Simatic WinCC software. The malware then automatically uses a default password that is hard-coded into the software to access the control system's Microsoft SQL database.

  Read the article

• Printer image correction

  - by Matthew Shinal

  Here is my problem: my printer and scanner (HP psc2410xi) prints darker than the photos taken and teh scanner has a background fuzz. I want to create and install files to have the printer lighten the photos it prints (yellow becomes dark yellow, etc) and delete the "fuzz" from the scanner image (you can see it on a blank scan and yes I did clean the scanner). I'm thinking there is a way to take a printed image, scan that in, and subtract the two images from each other to get the correction factor.

  Read the article

• My Folders Become Hidden System Files And Access Denied?

  - by echolab

  I just aske a question in Superuser site , i have an external hdd which suddenly seems infected and one of my folders which contain my photos changed to something like this One of superuser guys suggest that i install an ubuntu and try to scan and change permissions , but i am not an ubuntu expert , and believe me if my problem solve i will switch to it ( cause all i do is writing and taking photos i am tired of malewares and etc ) Now i have ubuntu and fedora installed ( after a long read through guides ) , both of them show infected folder as empty ( in windows 7 i see this strange folders , you can see in picture )

  Read the article

• How to download an MP3 or ZIP file onto mobile devices

  - by Hope4You

  I want to be able to download digital goods to smartphone users (music in format .mp3 or .zip). But iPhone and iPad do not allow direct forced downloads. How can I provide mobile users with digital downloads? I use PHP. The only way I can think of to do this is to use the Dropbox Web API to transfer files to the user's Dropbox account, which then synchronizes with their mobile device. Any other suggestions would be appreciated.

  Read the article

• My sound is not working

  - by gkhan

  I am not able to hear any sound. Does anyone have a clue how to proceed in fixing this? Issuing aplay gives this $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• My Cloud : un service de Cloud personnel , une alternative sérieuse aux services de stockage en ligne ?

  My Cloud : un service de cloud personnel , une alternative sérieuse aux services de stockage en ligne ? Le fabricant Western Digital profite du phénomène PRISM pour proposer une nouvelle approche en matière de stockage des données numériques dans les petites entreprises ou en famille. WD, filiale de Western Digital propose My Cloud, un service de Cloud personnel dont l'une des promesses est la simplicité d'utilisation. Avec cette alternative aux solutions de Cloud public proposées par des...

  Read the article

• Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

  - by linni

  I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

  Read the article

• Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

  - by linni

  I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

  - by user37968

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

  - by MIDoubleKO

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• Building a Media Center PC with Comcast Cable...?

  - by Rob

  Alright - so this might be a stupid question but I've never been all that much into TV. I currently have Comcast cable. I've just got the 'basic' 2-60 package or whatever; I've just always plugged the cable into the back of my TV. I've never had a cable box. Recently, Comcast has been pulling channels off of my line-up. Most recently, the stole the TV Guide channel from me. I'm told this is part of a push to get customers to switch to their digital line-up. But, I'm also told it requires some sort of digital receiver for each TV you've got. I don't want to buy a bunch of these digital receivers and I don't want to pay the monthly rental fee...but I have heard of how awesome media center PCs are and some really cool things they can do. And, I've got loads of PC parts sitting around. So, can someone guide me through this a bit? Are there computer video cards or TV tuners that are going to work with Comcast's digital cable? What kind of price range are we looking at?

  Read the article

• Program for remove exact duplicate files while caching search results

  - by John Thomas

  We need a Windows 7 program to remove/check the duplicates but our situation is somewhat different than the standard one for which there are enough programs. We have a fairly large static archive (collection) of photos spread on several disks. Let's call them Disk A..M. We have also some disks (let's call them Disk 1..9) which contain some duplicates which are to be found on disks A..M. We want to add to our collection new disks (N, O, P... aso.) which will contain the photos from disks 1..9 but, of course, we don't want to have any photos two (or more) times. Of course, theoretically, the task can be solved with a regular file duplicate remover but the time needed will be very big. Ideally, AFAIS now, the real solution would be a program which will scan the disks A..M, store the file sizes/hashes of the photos in an indexed database/file(s) and will check the new disks (1..9) against this database. However I have hard time to find such a program (if exists). Other things to note: we consider that the Disks A..M (the collection) doesn't have any duplicates on them the file names might be changed we aren't interested in approximated (fuzzy) comparison which can be found in some photo comparing programs. We hunt for exact duplicate files. we aren't afraid of command line. :-) we need to work on Win7/XP we prefer (of course) to be freeware TIA for any suggestions, John Th.

  Read the article

• How can I make sound over hdmi in kubuntu work?

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :)

  Read the article

• Backup Picasa 'people' tags data

  - by pelms

  OK, so I've spent a fair amount of time putting names to faces in Picasa 3.5 but in a few days (hopefully) my copy of Windows 7 should arrive and I'll need to reinstall Windows. So, does anyone know what I need to backup so that I don't have to re-enter all those name tags? N.B. I'm on Windows 7 RC and know that I don't have to do a clean reinstall but I would prefer to. Outcome: I clean installed Windows 7 and downloaded and installed Picasa. Unfortunately, the download link on the UK Picasa homepage still pointed to Picasa 3.0 (rather than 3.5) which doesn't have face recognition. This scanned my photos folders and overwrote the picasa.ini files along with the people information   :¬( Fortunately I'd backed up the photos before installing Win 7, so after uninstalling Picasa 3.0 (along with it's database), restoring the photos from backup and installing Picasa 3.5, I finally got my face names back. Extra... Google has now posted advice on how to migrate to Windows 7 and keep your Picasa database, meaning that it will not need to rescan you photos and will retain all information about then including name tags. They have a method for upgrading and for a clean install of Win 7. Basically you need to back up: "C:\Users\%username%\AppData\Local\Google\Picasa2" and "C:\Users\%username%\AppData\Local\Google\Picasa2Albums"

  Read the article

• NetworkOnMainThreadException while using AsyncTask

  - by Fansher

  Im making an app that uses the internet to retrive information. I get an NetworkOnMainThreadException as i tried to run it on 3.0 and above and have therefore tried to set it up using AsyncTask, but it still gives the exception and i don't know what is wrong. Oddly enough i read on this thread Android NetworkOnMainThreadException inside of AsyncTask that if you just removes the android:targetSdkVersion="10" statement from the manifest file it will be able to run. This works but i don't find it as the right solution to solve the problem this way. So if anyone can tell me what im doing wrong with the AsyncTask i will really appriciate it. Also if there is anybody that knows why removing the statement in the manifest makes it work, im really interested in that also. My code looks like this: public class MainActivity extends Activity { static ArrayList<Tumblr> tumblrs; ListView listView; TextView footer; int offset = 0; ProgressDialog pDialog; View v; String responseBody = null; HttpResponse r; HttpEntity e; String searchUrl; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); requestWindowFeature(Window.FEATURE_NO_TITLE); getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN, WindowManager.LayoutParams.FLAG_FULLSCREEN); final ConnectivityManager conMgr = (ConnectivityManager) getSystemService(Context.CONNECTIVITY_SERVICE); final NetworkInfo activeNetwork = conMgr.getActiveNetworkInfo(); if (activeNetwork != null && activeNetwork.isConnected()) { setContentView(R.layout.main); try { tumblrs = getTumblrs(); listView = (ListView) findViewById(R.id.list); View v = getLayoutInflater().inflate(R.layout.footer_layout, null); footer = (TextView) v.findViewById(R.id.tvFoot); listView.addFooterView(v); listView.setAdapter(new UserItemAdapter(this, R.layout.listitem)); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } catch (JSONException e) { e.printStackTrace(); } new GetChicks().execute(); footer.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { new loadMoreListView().execute(); } }); } else { setContentView(R.layout.nonet); } } public class UserItemAdapter extends ArrayAdapter<Tumblr> { public UserItemAdapter(Context context, int imageViewResourceId) { super(context, imageViewResourceId, tumblrs); } @Override public View getView(int position, View convertView, ViewGroup parent) { View v = convertView; if (v == null) { LayoutInflater vi = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); v = vi.inflate(R.layout.listitem, null); } Tumblr tumblr = tumblrs.get(position); if (tumblr != null) { ImageView image = (ImageView) v.findViewById(R.id.avatar); if (image != null) { image.setImageBitmap(getBitmap(tumblr.image_url)); } } return v; } } public Bitmap getBitmap(String bitmapUrl) { try { URL url = new URL(bitmapUrl); return BitmapFactory.decodeStream(url.openConnection() .getInputStream()); } catch (Exception ex) { return null; } } public ArrayList<Tumblr> getTumblrs() throws ClientProtocolException, IOException, JSONException { searchUrl = "http://api.tumblr.com/v2/blog/"webside"/posts?api_key=API_KEY"; ArrayList<Tumblr> tumblrs = new ArrayList<Tumblr>(); return tumblrs; } private class GetChicks extends AsyncTask<Void, Void, Void> { @Override protected Void doInBackground(Void... unused) { // TODO Auto-generated method stub runOnUiThread(new Runnable() { public void run() { HttpClient client = new DefaultHttpClient(); HttpGet get = new HttpGet(searchUrl); HttpResponse r = null; try { r = client.execute(get); int status = r.getStatusLine().getStatusCode(); if (status == 200) { e = r.getEntity(); responseBody = EntityUtils.toString(e); } } catch (ClientProtocolException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } catch (IOException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } JSONObject jsonObject; try { jsonObject = new JSONObject(responseBody); JSONArray posts = jsonObject.getJSONObject("response") .getJSONArray("posts"); for (int i = 0; i < posts.length(); i++) { JSONArray photos = posts.getJSONObject(i) .getJSONArray("photos"); for (int j = 0; j < photos.length(); j++) { JSONObject photo = photos.getJSONObject(j); String url = photo.getJSONArray("alt_sizes") .getJSONObject(0).getString("url"); Tumblr tumblr = new Tumblr(url); tumblrs.add(tumblr); } } } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } }); return null; } } public class Tumblr { public String image_url; public Tumblr(String url) { this.image_url = url; } } private class loadMoreListView extends AsyncTask<Void, Void, Void> { @Override protected void onPreExecute() { // Showing progress dialog before sending http request pDialog = new ProgressDialog(MainActivity.this); pDialog.setMessage("More chicks coming up.."); pDialog.setIndeterminate(true); pDialog.setCancelable(false); pDialog.show(); } @Override protected Void doInBackground(Void... unused) { // TODO Auto-generated method stub runOnUiThread(new Runnable() { public void run() { // increment current page offset += 2; // Next page request tumblrs.clear(); String searchUrl = "http://api.tumblr.com/v2/blog/"webside"/posts?api_key=API_KEY&limit=2 + offset; HttpClient client = new DefaultHttpClient(); HttpGet get = new HttpGet(searchUrl); HttpResponse r = null; try { r = client.execute(get); int status = r.getStatusLine().getStatusCode(); if (status == 200) { HttpEntity e = r.getEntity(); responseBody = EntityUtils.toString(e); } } catch (ClientProtocolException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } catch (IOException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } JSONObject jsonObject; try { jsonObject = new JSONObject(responseBody); JSONArray posts = jsonObject.getJSONObject("response") .getJSONArray("posts"); for (int i = 0; i < posts.length(); i++) { JSONArray photos = posts.getJSONObject(i) .getJSONArray("photos"); for (int j = 0; j < photos.length(); j++) { JSONObject photo = photos.getJSONObject(j); String url = photo.getJSONArray("alt_sizes") .getJSONObject(0).getString("url"); Tumblr tumblr = new Tumblr(url); tumblrs.add(tumblr); } } } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } // Setting new scroll position listView.setSelectionFromTop(0, 0); } }); return null; } protected void onPostExecute(Void unused) { pDialog.dismiss(); } } @Override public boolean onCreateOptionsMenu(android.view.Menu menu) { // TODO Auto-generated method stub super.onCreateOptionsMenu(menu); MenuInflater blowUp = getMenuInflater(); blowUp.inflate(R.menu.cool_menu, menu); return true; } @Override public boolean onOptionsItemSelected(MenuItem item) { // TODO Auto-generated method stub switch (item.getItemId()) { case R.id.aboutUs: Intent i = new Intent("com.example.example.ABOUT"); startActivity(i); break; case R.id.refresh: Intent f = new Intent(MainActivity.this, MainActivity.class); startActivity(f); finish(); break; case R.id.exit: finish(); break; } return false; } } Thanks for helping out.

  Read the article

• Submit information to url, but also open PDF

  - by Mad Ducky Digital Branding

  I have a client whose desire is to have her Wordpress blog show a MailChimp form on her home page as a gateway to a .pdf. I need the following behavior to occur when the user clicks "Submit": execute the included MailChimp's javascript file; this ensures the form was properly filled, and then performs the sign-up to the newsletter list (don't need help with this part) then show the user an informational PDF for download or viewing EDIT: The logical order was flipped from when I originally posted this. The script should execute, and only if the script gets executed properly should the PDF show to the user Note: My experience level with HTML and PHP is 3/4, and with JS I am 2/4 EDIT: (seems more like 1/4 at this point lol). If my research is correct, PHP (server-side language) would be used to do that which the client wants. Additional validation is not necessary beyond what MailChimp's script provides (it ensures that user has submitted a completed form) is not necessary in this case (the client says it's ok if the e-mail isn't valid at all). EDIT: Reworded this sentence from original post to be more clear The .pdf URL and content is static, and simply needs to be shown, not generated. ----RESEARCH---- I know that the Mailchimp form uses the following line to actually submit the information, but I want to do the action mentioned below, as well as open the aforementioned .pdf: <form action="http://*BLAH*.us2.list-manage.com/subscribe/post?u=*BLAHBLAH*&amp;id=*BLAHBLAHBLAH*" method="post" id="mc-embedded-subscribe-form" name="mc-embedded-subscribe-form" class="validate" target="_blank"> I am reading on other sites that I can conceivably point "action" to a .php file, but if there is a way to do this with javascript - since its using the .js file that I created for that already anyways, then I would be most happy. Barring that, I'll take what I can get.. ----SOLUTION?---- ...

  Read the article

• RoR | how to get content_tags to nest?

  - by Digital Cake

  As you can see I have a helper with a method that I'm trying to render out to the view. The nested content_tags do not render what is my disconnect about this tag? def draw_calendar(selected_month, month, current_date) content_tag(:table) do content_tag(:thead) do content_tag(:tr) do I18n.t(:"date.abbr_day_names").map{ |day| content_tag(:th, day, :escape => false) } end #content_tag :tr end #content_tag :thead content_tag(:tbody) do month.collect do |week| content_tag(:tr, :class => "week") do week.collect do |date| content_tag(:td, :class => "day") do content_tag(:div, date.day, :class => (Date.today == current_date ? "today" : nil)) end #content_tag :td end #week.collect end #content_tag :tr end #month.collect end #content_tag :tbody end #content_tag :table end #draw_calendar

  Read the article

• Using Mapkit to create a local searchable Map

  - by Digital D

  Using MapKit as a base, I'm planning on adding a map to a project with 'local search' capabilities. I think 'local search' describes the feature I want to design into the map. Here is my vision. The map is displayed on the bottom half of a view. The user's current location is highlighted by default. When the user pushes the 'search' button annotation pins drop onto the map. The search is programmatically fixed to a certain item....for example supermarkets. So supermarkets in a 5 mile radius of the user's current location will populate the map. How would I add this local search feature to the already amazing MapKit? I've learned an incredible amount as a new developer in the last few months, and look forward to learning googles...correction googols more. Thanks in anticipation.

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >