Search Results

Search found 980 results on 40 pages for 'directive'.

Page 28/40 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• VirtualHost not using correct SSL certificate file

  - by Shawn Welch

  I got a doozy of a setup with my virtual hosts and SSL. I found the problem, I need a solution. The problem is, the way I have my virtual hosts and server names setup, the LAST VirtualHost directive is associating the SSL certificate file with the ServerName regardless of IP address or ServerAlias. In this case, SSL on www.site1.com is using the cert file that is established on the last VirtualHost; www.site2.com. Is this how it is supposed to work? This seems to be happening because both of them are using the same ServerName; but I wouldn't think this would be a problem. I am specifically using the same ServerName for a purpose and I really can't change that. So I need a good fix for this. Yes, I could buy another UCC SSL and have them both on it but I have already done that; these are actually UCC SSLs already. They just so happen to be two different UCC SSLs. <VirtualHost 11.22.33.44:80> ServerName somename ServerAlias www.site1.com UseCanonicalName On RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 11.22.33.44:443> ServerName somename ServerAlias www.site1.com UseCanonicalName On SSLEngine on SSLCertificateFile /usr/local/apache/conf/ssl.crt/cert1.crt SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/cert1.key SSLCertificateChainFile /usr/local/apache/conf/chain/gd_bundle.crt RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 55.66.77.88:80> ServerName somename ServerAlias www.site2.com UseCanonicalName On RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 55.66.77.88:443> ServerName somename ServerAlias www.site2.com UseCanonicalName On SSLEngine on SSLCertificateFile /usr/local/apache/conf/ssl.crt/cert2.crt SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/cert2.key SSLCertificateChainFile /usr/local/apache/conf/chain/gd_bundle.crt RewriteEngine On RewriteOptions Inherit </VirtualHost>

  Read the article

• PHP output buffer settings ignored by server

  - by Ecom Evolution

  I have been trying to flush the output of certain scripts to the browser on demand, but they do not work on our production server. For instance, I tried running the "Phoca Changing Collation tool" (find it on Google) and I don't see any output until the script finishes executing. I've tried immediately flushing the buffer on other scripts that work fine on any server but this one using the following code: echo "something"; ob_flush(); flush(); Setting "ob_implicit_flush(1);" doesn't help either. The server is Apache 2.2.21 with PHP 5.2.17 running on Linux. You can see our php.ini file here if that will help: http://www.smallfiles.org/download/1123/php.ini.html This isn't the only problem we are having with the server ignoring in-script directives. The server also ignores timeout coding such as: ini_set('max_execution_time', 900*60); AND set_time_limit(86400); Script always times out at the php.ini default. Doesn't seem to matter if script is executed in IE or Firefox. Tried "ini_set('zlib.output_compression_level', 'Off');" and checked that it is "Off" in the php.ini file. The code "apache_setenv('no-gzip', 1);" causes a fatal error so tried uploading a .htaccess file with the "mod_gzip_on No" directive. Neither helps. Tried running Apache as fcgi and suphp, but same results. Server is NOT in safe mode. Pullin ma hair out!

  Read the article

• nginx rewrite or internal redirection cycle

  - by gyre

  Im banging my head against a table trying to figure out what is causing redirection cycle in my nginx configuration when trying to access URL which does not exist Configuration goes as follows: server { listen 127.0.0.1:8080; server_name .somedomain.com; root /var/www/somedomain.com; access_log /var/log/nginx/somedomain.com-access.nginx.log; error_log /var/log/nginx/somedomain.com-error.nginx.log debug; location ~* \.php.$ { # Proxy all requests with an URI ending with .php* # (includes PHP, PHP3, PHP4, PHP5...) include /etc/nginx/fastcgi.conf; } # all other files location / { root /var/www/somedomain.com; try_files $uri $uri/ ; } error_page 404 /errors/404.html; location /errors/ { alias /var/www/errors/; } #this loads custom logging configuration which disables favicon error logging include /etc/nginx/drop.conf; } this domain is a simple STATIC HTML site just for some testing purposes. I'd expect that the error_page directive would kick in in response to PHP-FPM not being able to find given files as I have fastcgi_intercept_errors on; in http block and nave error_page set up, but I'm guessing the request fails even before that somewhere on internal redirects. Any help would be much appreciated.

  Read the article

• OpenVPN: ERROR: could not read Auth username from stdin

  - by user56231

  I managed to setup openvpn but now I want to integrate a user/pass authentication method so, even though I haven't added the auth-nocache in the server config, whenever I try to connect it returns with the following message on the client side: ERROR: could not read Auth username from stdin My server.conf file contains basic stuff, everything works up untill I try to implement this for of authentication. mode server dev tun proto tcp port 1194 keepalive 10 120 plugin /usr/lib/openvpn/openvpn-auth-pam.so login client-cert-not-required username-as-common-name auth-user-pass-verify /etc/openvpn/auth.pl via-env ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem user nobody group nogroup server 10.8.0.0 255.255.255.0 persist-key persist-tun #persist-local-ip status openvpn-status.log verb 3 client-to-client push "redirect-gateway def1" push "dhcp-option DNS 10.8.0.1" log-append /var/log/openvpn comp-lzo I searched all over the net for a solution and all answers seems to be related to the auth-nocache param which I haven't set. The directive auth-user-pass-verify /etc/openvpn/auth.pl via-env points to a script which is executed to perform the authentication. A false authentication should result in a exit 1 while a true one should result with exit 0. For testing, that script auth.pl returns exit 0 no matter what the input is but it seems that the file is not executed before the error raises. auth.pl file contents: #!/usr/bin/perl my $user = $ENV{username}; my $passwd = $ENV{password}; printf("$user : $passwd\n"); exit 0; Any ideas?

  Read the article

• httpd Redirect / Rewrite .com to .org

  - by David W

  I am trying to redirect a www.example.com to www.example.org. I cannot figure out what I'm doing wrong. I have ensured that mod_rewrite is enabled in httpd.conf with: LoadModule rewrite_module modules/mod_rewrite.so I further verify this by running: httpd -M and getting rewrite_module (shared) included in the results. Later in the same httpd.conf file is the VirtualHost directive where I am trying to perform the rewrite: <VirtualHost *:80> Options +FollowSymlinks RewriteEngine On RewriteCond %{HTTP_HOST} ^example.com [NC] RewriteRule ^(.*)$ http://www.example.org/$1 [R=301,NC,L] ServerAdmin [email protected] DocumentRoot /var/www/html ServerName example.org ServerAlias www.example.org *.example.org <Directory "/var/www/html"> Options Includes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> ErrorLog /var/www/logs/error_log CustomLog /var/www/logs/access_log common </VirtualHost> As we can see, we are following SymLinks in the directory (which I believe is a requirement), AND we allow All Overrides (which meets another requirement). But obviously I'm still doing something wrong. Can you spot it?

  Read the article

• Ubuntu 10.04 server delay responding to AJAX requests

  - by DanielAttard

  I manage a Ubuntu 10.04 server with a couple of domains hosted on it. As I continue to learn more about all these wonderful new (for me), one issue that I have begun to notice is the delay it sometimes takes for the server to respond to certain requests. As an example, when I view the timeline of events using firebug I can see that most of the time when I make a POST, the server responds in under 100ms. Sometimes, however, there is a substantial delay before the RESPONSE from the server. I can't seem to tell when the delay will happen and when it won't, however, when it happens the delay is always for about 4.5 seconds. The delay seems to happen about 30-40% of the time. Here is the section of apache2.conf dealing with logs: # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent I have no idea where to look to try and debug this problem or investigate further. Any suggestions?

  Read the article

• adding trac to apache2 configuration file

  - by Michael

  I currently have apache2 running from a mythtv/mythweb install. This made two config files available in sites-enabled. One of them ("default-mythbuntu") has the VirtualHost directive and seems like a normal file (except a change to the directory index). There is also a mythweb.conf file that only has directives and sets various variables for mythweb. I want to host a trac site as well. According to this site: http://trac.edgewall.org/wiki/TracOnUbuntu there are some setting I need to set for the Trac site. They give me directions for making a VirtualHost, but I think I should use the current VirtualHost and just add the directives (I'll need to change the default location they point to from the site above to just point to the trac location). Where should I put these directives? Can I make a Trac.conf with just the settings for Trac and enable it, or do I need to put them in the default-mythbuntu file? I don't like that later because it doesn't separate out the Trac configs. How does Apache know that the mythweb (and the trac.conf I want to make) belong to the virtualhost defined in the default-mythbuntu? It is the only virtualhost that is being defined on my system if that matters.

  Read the article

• How to set the VirtualDocumentRoot based on the files within

  - by Chuck Vose

  I'm trying to set up Apache to use the VirtualDocumentRoot directive but my sites aren't all exactly the same. Most of the sites have a drupal folder which should be the root but there are a few really old drupal sites, a few rails sites, some django sites, etc. that want the Document root to be / or some other folder. Is there a way to set up VirtualDocumentRoot based on a conditional or is there a way to use RewriteRule/Cond to detect that / is the incorrect folder if there is a drupal folder or a public folder? Here's what I have so far: <VirtualHost *:80> # Wildcard ServerAlias, this is the default vhost if no specific vhost matches first. ServerAlias *.unicorn.devserver.com # Automatic ServerName, based on the HTTP_HOST header. UseCanonicalName Off # Automatic DocumentRoot. This uses the 4th level domain name as the document root, # for example http://bar.foo.baz.com/ would respond with /Users/vosechu/Sites/bar/drupal. VirtualDocumentRoot /Users/vosechu/Sites/%-4/drupal </VirtualHost> Thanks in advance! -Chuck

  Read the article

• Can OpenVPN invoke DHCP Client?

  - by Ency

  I have got working VPN connection through openvpn, but I would like to use also my DHCP server and not openvpn's push feature. Currently everything works fine, but I have to manually start dhcp client, eg. dhclient tap0 and I get IP and other important stuff from my DHCP, is there any directive which start DHCP Client when connection is established? There is my client's config: remote there.is.server.com float dev tap tls-client #pull port 1194 proto tcp-client persist-tun dev tap0 #ifconfig 192.168.69.201 255.255.255.0 #route-up "dhclient tap0" #dhcp-renew ifconfig 0.0.0.0 255.255.255.0 ifconfig-noexec ifconfig-nowarn ca /etc/openvpn/ca.crt cert /etc/openvpn/encyNtb_openvpn_client.crt key /etc/openvpn/encyNtb_openvpn_client.key dh /etc/openvpn/dh-openvpn.dh ping 10 ping-restart 120 comp-lzo verb 5 log-append /var/log/openvpn.log Here comes server's config: mode server tls-server dev tap0 local servers.ip.here port 1194 proto tcp-server server-bridge # Allow comunication between clients client-to-client # Allowing duplicate users per one certificate duplicate-cn # CA Certificate, VPN Server Certificate, key, DH and Revocation list ca /etc/ssl/CA/certs/ca.crt cert /etc/ssl/CA/certs/openvpn_server.crt key /etc/ssl/CA/private/openvpn_server.key dh /etc/ssl/CA/dh/dh-openvpn.dh crl-verify /etc/ssl/CA/crl.pem # When no response is recieved within 120seconds, client is disconected keepalive 10 60 persist-tun persist-key user openvpn group openvpn # Log and Connected clients file log-append /var/log/openvpn verb 3 status /var/run/openvpn/vpn.status 10 # Compression comp-lzo #Push data to client push "route-gateway 192.168.69.1" push "redirect-gateway def1"

  Read the article

• Enabling mod_rewrite on Amazon Linux

  - by L. De Leo

  I'm trying to enable mod_rewrite on an Amazon Linux instance. My Directory directives look like this: <Directory /> Order deny,allow Allow from all Options None AllowOverride None </Directory> <Directory "/var/www/vhosts"> Order allow,deny Allow from all Options None AllowOverride All </Directory> And then further down in httpd.conf I have the LoadModule directive: ... other modules... #LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so #LoadModule proxy_module modules/mod_proxy.so ... other modules... I have commented out all the Apache modules not needed by Wordpress. Still when I issue http restart and then check the loaded modules with /usr/sbin/httpd -l I get only: [root@foobar]# /usr/sbin/httpd -l Compiled in modules: core.c prefork.c http_core.c mod_so.c Inside the virtual host containing the Wordpress site I have an .htaccess containing: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress The .htaccess is owned by apache which is the user apache runs under. The apachectl -t command returns Syntax OK What am I doing wrong? What should I check?

  Read the article

• vhost configuration for owncloud

  - by Razer

  I'm using apache2 for hosting owncloud. I configured a vhost file for owncloud, but every time I go on the site my browser downloads a ruby file. Here is my vhost configuration: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName http://rsserver.fritz.box DocumentRoot /var/www/owncloud/ <Directory /var/www/owncloud/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Apache error log tells me: [Sat Jun 16 20:46:04 2012] [error] [client xx.xx.xx.xx] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/owncloud/core/templates/403.php mod_rewrite is enabled. Where is the problem?

  Read the article

• Basic Apache setup is not seeing my site

  - by Jakobud

  Sorry that is a horrible thread subject, but I cannot think of a better more descriptive subject. We are running a Fedora 11 server that is currently hosting some CRM on it. I want to use a VirtualHost directive to add another site to the server. So I created this conf: /etc/httpd/conf.d/mysite.ourdomain.com.conf And here is the content: <VirtualHost *:80> ServerName mysite.ourdomain.com DocumentRoot /www/mysite ServerAdmin [email protected] ErrorLog /var/log/mysite.ourdomain.com-error.log CustomLog /var/log/mysite.ourdomain.com-access.log common </VirtualHost> I restarted apache, getting the following warning: [warn] NameVirtualHost *:80 has no VirtualHosts From what I read, this warning is not related and I can ignore it and my site should still be up and running, correct? (I'll troubleshoot this error later if so) Well I have our DNS server setup to point mysite.ourdomain.com to goto this server. I can ping it and it points to the correct LAN IP, etc.. Now when I try to access it in the browswer I get nothing. It just says Connecting... and never gets there. If I try mysite.ourdomain.com or the IP address, neither one doesn't get there. It's a very simple and basic apache setup so I'm not sure what I'm doing wrong... Like I said, the other thing that is running on this server is a crm and it's .conf looks something like this: Listen x.x.x.x:443 <VirtualHost x.x.x.x:443> ServerAdmin [email protected] ServerName crm.ourdomain.com ErrorLog /var/log/httpd/ourdomain/crm-error.log CustomLog /var/log/httpd/ourdomain/crm-access.log common DocumentRoot /www/ourdomain/crm <IfModule mod_dir.c> DirectoryIndex /index.php </IfModule> </VirtualHost> There is also some LDAP authentication stuff in that config but I left it out cause I assumed it wasn't necessary to post. Anyone have any clue where I should start or what settings I can post from httpd.conf that would help?

  Read the article

• Apache server configuration name resolution (virtual host naming + security)

  - by Homunculus Reticulli

  I have just setup a minimal (hopefully secure? - comments welcome) apache website using the following configuration file: <VirtualHost *:80> ServerName foobar.com ServerAlias www.foobar.com ServerAdmin [email protected] DocumentRoot /path/to/websites/foobar/web DirectoryIndex index.php # CustomLog with format nickname LogFormat "%h %l %u %t \"%r\" %>s %b" common CustomLog "|/usr/bin/cronolog /var/log/apache2/%Y%m.foobar.access.log" common LogLevel notice ErrorLog "|/usr/bin/cronolog /var/log/apache2/%Y%m.foobar.errors.log" <Directory /> AllowOverride None Order Deny,Allow Deny from all </Directory> <Directory /path/to/websites/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I am able to access the website by using www.foobar.com, however when I type foobar.com, I get the error 'Server not found' - why is this? My second question concerns the security implications of the directive: <Directory /path/to/websites/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> in the configuration above. What exactly is it doing, and is it necessary?. From my (admitedly limited) understanding of Apache configuration files, this means that anyone will be able to access (write to?) the /path/to/websites/ folder. Is my understanding correct? - and if yes, how is this not a security risk?

  Read the article

• Apache mod_proxy with SSL not redirecting

  - by simonszu

  I have a custom server running behind an apache reverse proxy. Since the custom server can only handle HTTP traffic, i am trying to use apache for wrapping proper SSL around it, and for some kind of HTTP authentication. So i enabled mod_proxy and mod_ssl and modified sites-available/default-ssl. The config is as following: <Location /server> order deny,allow allow from all AuthType Basic AuthName "Please log in" AuthUserFile /etc/apache2/htpasswd Require valid-user ProxyPass http://192.168.1.102:8181/server ProxyPassReverse http://192.168.1.102:8181/server </Location> The custom server is accessible from the internal network via the location specified in the ProxyPass directive. However, when the proxy is accessed from the outside, it presents the login prompt, and after successfully authenticated, i get a blank page with the words The resource can be found at http://192.168.1.102:8181/server. When i type the external URL again in an already authenticated browser instance, i am properly redirected to the server frontend. The access.log is full of entrys stating that my browser does successful GET requests, and the proxy is happily serving the /server ressource. However, the ressource isn't containing the server's frontend, but this blank page with these words on it.

  Read the article

• Apache2: How to split out the SSL configuration?

  - by Klaas van Schelven

  In Apache2, I'd like to separately define my SSL-related stuff once, and in a separate file from the rest of the configuration. This is mostly a matter of taste, but it also allows me to include the rest of the configuration in my automatic deployment process. I.e.: current situation: # in file: 0000-ourdomain.com.conf (number needs to be low) <VirtualHost xx.xx.xx.xx:443> # SSL part SSLEngine on SSLCertificateFile ....crt SSLCACertificateFile ...pem SSLCertificateChainFile ...intermediate.pem SSLCertificateKeyFile ....wildcard.ourdomain.com.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown ServerName www.ourdomain.com ServerAlias ourdomain.com # the actual configuration, as found for xx.xx.xx.xx:80, repeated </VirtualHost> I'd like # in file: 0000-ssl-stuff <VirtualHost xx.xx.xx.xx:443> # SSL part SSLEngine on SSLCertificateFile ....crt SSLCACertificateFile ...pem SSLCertificateChainFile ...intermediate.pem SSLCertificateKeyFile ....wildcard.ourdomain.com.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown ServerName www.ourdomain.com ServerAlias ourdomain.com </VirtualHost> # in file: ourdomain.com.conf <VirtualHost xx.xx.xx.xx:443> # the actual configuration, as found for xx.xx.xx.xx:80, repeated </VirtualHost> Unfortunately, this does not seem to work. Apache SSL fails, though it does not give an error message at reload or syntax-check. My best found workaround is to us an Include directive from the 0000-ssl file. Many thanks!

  Read the article

• How to send Content-Disposition headers in apache for files?

  - by Rory McCann

  I have a directory of text files that I'm serving out with apache 2. Normally when I (or any user) access the files they see them in their browser. I want to 'force'* the web browser to pop up a 'Save as' dialog box. I know this is possible to do with the Content-Disposition headers (more info). Is there some way to turn that on for each file? Ideally I'd like something like this: <Directory textfiles> AutoAddContentDispositionHeaders On </Directory> And then apache would set the correct content disposition header, including using the same filename. Something like this might be possible with the apache Header directive. Bonus points if it's included by standing in apache in debian. I could do a simple PHP wrapper script that takes in a filename argument, makes the call to header(...) and then prints the file, but then i have to validdate input etc. that's work I'm trying to avoid. * I know you can't actually force things when it comes to the web

  Read the article

• Apache2 - rewrite a bunch of specified pathname URLs to one URL

  - by James Nine

  I need to rewrite a bunch of urls (about 100 or so) for SEO purposes, and there may be more being added in the future (probably another 50-100 later on). I need a flexible way of doing this and so far, the only way I can think of is to edit the .htaccess file using the rewrite engine. For example, I have a bunch of urls like this (please note that the query string is irrelevant, and dynamic; it could be anything. I was only using them purely as an example. I am only focusing on the pathname--the part between the hostname and query string, as marked in bold below): http://example.com/seo_term1?utm_source=google&utm_medium=cpc&utm_campaign=seo_term http://example.com/another_seo_term2?utm_source=facebook&utm_medium=cpc&utm_campaign=seo_term http://example.com/yet_another_seo_term3?utm_source=example_ad_network&utm_medium=cpc&utm_campaign=seo_term http://example.com/foobar_seo_term4 http://example.com/blah_seo_term5?test=1 etc... And they are all being rewritten to (for now): http://example.com/ What's the most efficient/effective way of doing this so that I may be able to add more terms in the future? One solution I came across is to do this (in the .htaccess file): RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ / [NC,QSA] However, the problem with this solution is that even invalid urls (such as http://example.com/blah) will be rewritten to http://example.com instead of giving a 404 code (which is what it is supposed to do anyway). I'm still trying to figure out how all this works, and the only way I can think of is to write 100 more RewriteCond statements (such as: RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR]) before the RewriteRule directive. For example: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR] RewriteCond %{REQUEST_URI} =/another_seo_term2 [NC,OR] RewriteCond %{REQUEST_URI} =/yet_another_seo_term3 [NC,OR] RewriteCond %{REQUEST_URI} =/foobar_seo_term4 [NC,OR] RewriteCond %{REQUEST_URI} =/blah_seo_term5 [NC] RewriteRule ^(.*)$ / [NC,QSA] But that doesn't sound very efficient to me. Is there a better way?

  Read the article

• Setting up Apache with multiple virtual host when using Plone 4.1

  - by Shaun Owens

  I have a Plone server running on CentOS, I have multiple instances of Plone running 4.0 and 4.1, I also have multiple sites. I am new to linux and haveing problems getting Apache to work with multiple virtuale hosts. The first host listed works just fine but the second host does not. I get the following error message when I start HTTPD: Starting httpd: [Mon Nov 07 14:38:31 2011] [warn] VirtualHost ordevel3.ucdavis.edu:80 overlaps with VirtualHost ordevel4.ucdavis.edu:80, the first has precedence, perhaps you need a NameVirtualHost directive. What am I missing to get the virtual hosts to work correctly? Below in my syntax in httpd.conf. <VirtualHost ordevel3.abc.edu:80> ServerAlias ordevel3.abc.edu ServerAdmin [email protected] ServerSignature On <IfModule mod_rewrite.c> RewriteEngine On # serving icons from apache 2 server RewriteRule ^/icons/ - [L] RewriteRule ^/(.*) \ http://localhost:8080/VirtualHostBase/http/%{SERVER_NAME}:80/itsdevel3/VirtualHostRoot/$1 [L,P] </IfModule> <IfModule mod_proxy.c> ProxyVia On # prevent the webserver from beeing used as proxy <LocationMatch "^[^/]"> Deny from all </LocationMatch> </IfModule> </VirtualHost> <VirtualHost ordevel4.abc.edu:80> ServerAlias ordevel4.abc.edu ServerAdmin [email protected] ServerSignature On <IfModule mod_rewrite.c> RewriteEngine On # serving icons from apache 2 server RewriteRule ^/icons/ - [L] RewriteRule ^/(.*) \ http://localhost:8180/VirtualHostBase/http/%{SERVER_NAME}:80/ITS/VirtualHostRoot/$1 [L,P] </IfModule> <IfModule mod_proxy.c> ProxyVia On # prevent the webserver from beeing used as proxy <LocationMatch "^[^/]"> Deny from all </LocationMatch> </IfModule> </VirtualHost>

  Read the article

• Apache virtualhost - only apply script if file does not exist in document root

  - by Brett Thomas

  Sorry for the newbie apache question. I'm wondering if it's possible to set up the following non-conventional apache virtualhost (for a Django app): -- If a file exists in the DocumentRoot (/var/www) it will be shown. So if /var/www/foo.html exists, then it can be seen at www.example.com/foo.html. -- If file does not exist, it is served via a virtualhost. I'm using mod_wsgi with a WSGIScriptAlias directive that points to a Django app. So if there is no /var/www/bar.html, www.example.com/bar.html will be passed to the Django app, which may or may not be a 404 error. One option is to create an Alias for each individual file/directory, but people want to be able to post a file without adding an alias, and we want to keep the above URL structure for legacy reasons. Simplified Virtualhost is: <VirtualHost *:80> ServerName www.example.com DocumentRoot /var/www WSGIScriptAlias / /path/to/django.wsgi <Directory /path/to/app> Order allow,deny Allow from all </Directory> Alias /hi.html /var/www/hi.html </VirtualHost> The goal is to have www.example.com/hi.html work as above, without the Alias line

  Read the article

• Choose identity from ssh-agent by file name

  - by leoluk

  Problem: I have some 20-30 ssh-agent identities. Most servers refuse authentication with Too many failed authentications, as SSH usually won't let me try 20 different keys to log in. At the moment, I am specifying the identity file for every host manually, using the IdentityFile and the IdentitiesOnly directive, so that SSH will only try one key file, which works. Unfortunately, this stops working as soon as the original keys aren't available anymore. ssh-add -l shows me the correct paths for every key file, and they match with the paths in .ssh/config, but it doesn't work. Apparently, SSH selects the indentity by public key signature and not by file name, which means that the original files have to be available so that SSH can extract the public key. There are two problems with this: it stops working as soon as I unplug the flash drive holding the keys it renders agent forwarding useless as the key files aren't available on the remote host Of course, I could extract the public keys from my identity files and store them on my computer, and on every remote computer I usually log into. This doesn't looks like a desirable solution, though. What I need is a possibility to select an identity from ssh-agent by file name, so that I can easily select the right key using .ssh/config or by passing -i /path/to/original/key, even on a remote host I SSH'd into. It would be even better if I could "nickname" the keys so that I don't even have to specify the full path.

  Read the article

• PHP enable sqlite phpinfo states --without-sqlite

  - by Jahmic

  I've seen similar questions but none that address my situation adequately. I'm running Apache and PHP 5.3.6 on a amazon cloud server. phpinfo keeps stating that sqlite is disabled. At least that what it seems from the configure line: './configure' ... '--without-sqlite' In other parts of phpinfo() output: PDO PDO drivers mysql, sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value and at least one the following PHP commands fail: if (!extension_loaded('SQLite') OR !function_exists('sqlite_open')) Yum install states that both sqlite and pdo-lite are already installed. I've tried to enable sqlite by editing my local php.ini by adding: ; Enable sqlite3 extension module extension=sqlite3.so I've checked the main php.ini (/etc/php.ini) and there is nothing specific about disabling it. In fact, there is a sub-conig file loaded in php.d that also specifies this extension as well as another for the pdo-sqlite I'm running of things to look for or try. Any suggestions. How do I find where the PHP configure is stated? Thanks

  Read the article

• Rewriting html links with modproxyperlhtml

  - by Juancho

  I'm trying to setup an Apache reverse proxy using mod_proxy and modproxyperlhtml. This is my scenario: Domain for the proxy: http : // www.myserver.com/ Destination server (the one behind the proxy): http : // myserver.foo.com/myapp/ I'm sorry that I have to space the URL but serverfault doesn't allow me to post more than two links as "spam protection mechanism" (ridiculous on a site where you ask questions about servers and it's really probable to post more than two times the same URL's to explain your question). The idea is to map http : // www.myserver.com/ to http : // myserver.foo.com/myapp/ . Note that the path on the proxy is / and on the destination server is /myapp/. All of the examples I can find on the net (like the one on the official documentation of modproxyperlhtml) are the other way around, ie. path on the proxy /myapp/ and path on the destination server /. This is my current config that doesn't work: ProxyPass / http : // myserver.foo.com/myapp/ ProxyPassReverse / http : // myserver.foo.com/myapp/ PerlInputFilterHandler Apache2::ModProxyPerlHtml PerlOutputFilterHandler Apache2::ModProxyPerlHtml SetHandler perl-script PerlSetVar ProxyHTMLVerbose "On" LogLevel Info <Location / > # ProxyPassReverse /myapp/ PerlAddVar ProxyHTMLURLMap "/myapp/ /" PerlAddVar ProxyHTMLURLMap "http : // myserver.foo.com /" </Location> The examples use the ProxyPassReverse inside the Location directive, but on my case doesn't work, only when outside. With this configuration the links aren't being replaced as they should be, my guess is that the location isn't being found, thus the rewrite rules aren't being applied. The error log only shows that it uncompresses the content, searches it but doesn't find anything: [Tue Nov 13 0842:05 2012] [warn] [ModProxyPerlHtml] Uncompressing text/html; charset=UTF-8, Content-Encoding: gzip\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Compressing output as Content-Encoding: gzip\n [Tue Nov 13 08:42:06 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n What could be wrong ?

  Read the article

• Starting nginx with systemctl fails, but running the command manually doesn't

  - by Ivan

  On Arch Linux, for some reason, when I try to start nginx with the command "systemctl start nginx", it fails, with this being the output of "systemctl status nginx": Loaded: loaded (/etc/systemd/system/nginx.service; enabled) Active: failed (Result: exit-code) since Wed 2013-10-30 16:22:17 EDT; 5s ago Process: 9835 ExecStop=/usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -g pid /run/nginx.pid; -s quit (code=exited, status=126) Process: 3982 ExecStart=/usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -g pid /run/nginx.pid; daemon on; master_process on; (code=exited, status=0/SUCCESS) Process: 10967 ExecStartPre=/usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -t -q -g pid /run/nginx.pid; daemon on; master_process on; (code=exited, status=126) Main PID: 3984 (code=exited, status=0/SUCCESS) CGroup: /system.slice/nginx.service ...but when I run /usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -t -q -g "pid /run/nginx.pid; daemon on; master_process on;" and then /usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -g "pid /run/nginx.pid; daemon on; master_process on;" as root, all it does is return a warning, but works just fine: nginx: [warn] the "user" directive makes sense only if the master process runs with super-user privileges, ignored in /etc/nginx/nginx.conf:1 Why is it doing that?

  Read the article

• Moving Zend Framework 2 from apache to nginx

  - by Aleksander

  I would like to move site that uses Zend Framework 2 from Apache to Nginx. The problem is that site have 6 modules, and apache handles it by aliases defined in httpd-vhosts.conf, #httpd-vhosts.conf <VirtualHost _default_:443> ServerName localhost:443 Alias /develop/cpanel "C:/webapps/develop/mil_catele_cp/public" Alias /develop/docs/tech "C:/webapps/develop/mil_catele_tech_docs/public" Alias /develop/docs "C:/webapps/develop/mil_catele_docs/public" Alias /develop/auth "C:/webapps/develop/mil_catele_auth/public" Alias /develop "C:/webapps/develop/mil_web_dicom_viewer/public" DocumentRoot "C:/webapps/mil_catele_homepage" </VirtualHost> in httpd.conf DocumentRoot is set to C:/webapps. Sites are avialeble at for example localhost/develop/cpanel. Framework handles further routing. In Nginx I was able to make only one site available by specifing root C:/webapps/develop/mil_catele_tech_docs/public; in server block. It works only because docs module don't depend on auth like others, and site was at localhost/. In next attempt: root C:/webapps; location /develop/auth { root C:/webapps/develop/mil_catele_auth/public; try_files $uri $uri/ /develop/mil_catele_auth/public/index.php$is_args$args; } Now as I enter localhost/develop/cpanel it gets to correct index.php but can't find any resources (css,js files). I have no Idea why reference paths in browswer's GET requsts changed to https://localhost/css/bootstrap.css form https://localhost/develop/auth/css/bootstrap.css as it was on apache. This root directive seems not working. Nginx handles php by using fastCGI location ~ \.(php|phtml)?$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param APPLICATION_ENV production; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } I googled whole day, and found nothing usefull. Can someone help me make this configuration work like on Apache?

  Read the article

• Cache-control for permanent 301 redirects nginx

  - by gansbrest

  I was wondering if there is a way to control lifetime of the redirects in Nginx? We would liek to cache 301 redirects in CDN for specific amount of time, let say 20 minutes and the CDN is controlled by the standard caching headers. By default there is no Cache-control or Expires directives with the Nginx redirect. That could cause the redirect to be cached for a really long time. By having specific redirect lifetime the system could have a chance to correct itself, knowing that even "permanent" redirect change from time to time.. The other thing is that those redirects are included from the Server block, which according the nginx specification should be evaluated before locations. I tried to add add_header Cache-Control "max-age=1200, public"; to the bottom of the redirects file, but the problem is that Cache-control gets added twice - first comes let say from the backend script and the other one added by the add_header directive.. In Apache there is the environment variable trick to control headers for rewrites: RewriteRule /taxonomy/term/(\d+)/feed /taxonomy/term/$1 [R=301,E=expire:1] Header always set Cache-Control "store, max-age=1200" env=expire But I'm not sure how to accomplish this in Nginx.

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >