Search Results

Search found 26335 results on 1054 pages for 'external display'.

Page 28/1054 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Ubuntu 12.04 dual monitor reset bug

    - by Tentresh
    My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

    Read the article

  • How to recognize external hard drive from all local drives in .NET Framework?

    - by biajee
    I've already tried System.IO.DriveType. But it only provides to me with the information of whether it's a removable drive such as floppy disc or a USB flash drive. And a USB external hard drive will be recognized as a local non-removable drive in this case. Furthermore, since there are more than one kinds of external hard drive, for example, USB and IEEE 1394. It's really hard to figure it out from ports. Any information will be appreciated.

    Read the article

  • DIrect videos and slideshows fullscreen from another display

    - by neurino
    I have 3 displays: 1 control display I can see 2 40" Full HD displays I can't see my need is to play videos and presentations fullscreen on the two 40" screens while being able to control them from the control display. So far I am able to achieve this with a cumbersome set of keyboard shortcuts like: open VLC on control display send to left display with Win + Shift + Left go fullscreen with f and more combinations to restore, get VLC on control display etc. This is really error prone and not professional. Also I wish I have a media player and a slideshow player that can: send the same video / slideshow to the two 40" displays at the same time send two different videos / slideshows, one each 40" display having all controls on the central display, the only one I can see. Any advice welcome, thank you for your support.

    Read the article

  • Inside The Kindle Paperwhite’s Display [Video]

    - by Jason Fitzpatrick
    By far the most praised feature of the new Amazon Kindle Paperwhite ebook reader is the new display; this video takes you behind the scenes with the design team and highlights what exactly makes the evenly lit display work so well. Accounting for the promotional nature of the video, it’s still fascinating to take a look at how they crafted the front plate of the display to yield such an even front-lit effect. You can read more about the Kindle Paperwhite here. [via ExtremeTech] HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

    Read the article

  • Display clock frequency per core using Conky

    - by cfbaptista
    I am using Conky to display a lot of information of my system. I managed to display the load percentage per core. But I do not know how to display the clock frequency of each core. What I have now is: ${font sans-serif:bold:size=8}PROCESSORS ${hr 2}${font} CPU1: ${cpu cpu1}% $alignr ${freq} MHz $alignr ${cpubar cpu1 8,60} CPU2: ${cpu cpu2}% $alignr ${freq} MHz $alignr ${cpubar cpu2 8,60} CPU3: ${cpu cpu3}% $alignr ${freq} MHz $alignr ${cpubar cpu3 8,60} CPU4: ${cpu cpu4}% $alignr ${freq} MHz $alignr ${cpubar cpu4 8,60} CPU5: ${cpu cpu5}% $alignr ${freq} MHz $alignr ${cpubar cpu5 8,60} CPU6: ${cpu cpu6}% $alignr ${freq} MHz $alignr ${cpubar cpu6 8,60} CPU7: ${cpu cpu7}% $alignr ${freq} MHz $alignr ${cpubar cpu7 8,60} CPU8: ${cpu cpu8}% $alignr ${freq} MHz $alignr ${cpubar cpu8 8,60} But this only gives me the global clock frequency and not the individual clock frequency per core. Does someone know how to get the individual clock frequency per core? System information Linux Mint 13 KDE, 64 bit (based on Ubuntu 12.04) Intel i7-2670QM (quad core with multithreading)

    Read the article

  • How can I set a second screen (DISPLAY=:0.1) as the default gnome display?

    - by Pedro Silva
    Due to various reasons, I have my main monitor set as the secondary display in xorg.conf. I would like to have gnome initialize metacity, gnome-panel as running primarily on :0.1, instead of :0.0. Is this possible at all? To clarify, this is a laptop with its LCD turned off. My main monitor is connected to the VGA out and is driven by the nouveau driver for NVIDIA; a secondary monitor is on a displaylink usb-vga donverter. The seconday monitor is set in xorg.conf as the primary display (no way around it). I can do things like DISPLAY=:0.1 gnome-terminal to run applications on the main monitor. My question is whether it is possible to do this (GNOME-) system-wide.

    Read the article

  • Non-unique display names?

    - by Davy8
    I know of at least big title game (Starcraft II) that doesn't require unique display names, so it would seem like it can work in at least some circumstance. Under what situations does allowing non-unique display names work well? When does it not work well? Does it come down to whether or not impersonation of someone else is a problem? The reasons I believe it works for Starcraft II is that there isn't any kind of in-game trading of virtual goods and other than "for kicks" there isn't much incentive to impersonate someone else in the game. There's also ladder rankings so even trying to impersonate a pro is easily detectable unless you're on a similar skill level. What are some other cases where it makes sense to specifically allow or disallow duplicate display names? (I have no idea what to tag this as. I went with game-design because I needed at least 1 tag and I don't have rep to create new ones yet.)

    Read the article

  • Attach Keyboard/Mouse to X Display in Dell XPS L502x Dual Video Cards (Intel/Nvidia HDMI)

    - by lcoronelp
    The idea: Use a second monitor in Dell XPS L502x with HDMI port in Ubuntu 12.04 The process: I connect the HDMI cable to monitor. I read this and I have video in HDMI monitor with Bumblebee and this commands: optirun nvidia-settings -c :8 DISPLAY=:8.0 firefox I have created a second keyboard/mouse master group with xinput with this solution. The problem: The second monitor (Display 8) doesn't recognize the keyboard/mouse and I cant use it. The question: Do you know some command to attach the keyboard/mouse master group to Display 8? I think that xinput -set-cs may work but it does not.

    Read the article

  • "LNK2001: unresolved external symbol" when trying to build my program

    - by random
    I get the following error(s) on my program that captures the mouse and then draws a line. Errors: 1>------ Build started: Project: Capture_Mouse_Line, Configuration: Debug Win32 ------ 1> main.cpp 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::yc2" (?yc2@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::xc2" (?xc2@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::yc1" (?yc1@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::xc1" (?xc1@Line@@2PAJA) 1>MSVCRTD.lib(crtexe.obj) : error LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup 1>D:\Visual C++ Projects\Capture_Mouse_Line\Debug\Capture_Mouse_Line.exe : fatal error LNK1120: 5 unresolved externals ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== Here is my code: #include<allegro5\allegro.h> #include<allegro5\allegro_native_dialog.h> #include<allegro5\allegro_primitives.h> #include<Windows.h> #include<allegro5\allegro_windows.h> #ifndef WIDTH #define WIDTH 1440 #endif #ifndef HEIGHT #define HEIGHT 900 #endif class Line { public: static void ErasePreviousLine(); static void DrawLine(long* x, long* y,long* x2,long* y2); static bool Erasable(); static long* xc1; static long* yc1; static long* xc2; static long* yc2; }; void Line::ErasePreviousLine() { delete xc1; xc1 = NULL; delete yc1; yc1 = NULL; delete xc2; xc2 = NULL; delete yc2; yc2 = NULL; } bool Line::Erasable() { if(xc1 && yc1 && xc2 && yc2 == NULL) { return false; } else { return true; } } void Line::DrawLine(long* x,long* y,long* x2,long* y2) { if(!al_init_primitives_addon()) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize allegro", NULL,NULL); } xc1 = x; yc1 = y; xc2 = x2; yc2 = y2; al_draw_line((float)*xc1, (float)*yc1, (float)*xc2, (float)*yc2,al_map_rgb(255,0,255), 1); delete x; delete y; delete x2; delete y2; } LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam); int WINAPI WinMain(HINSTANCE hInstance,HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { MSG msg; ALLEGRO_DISPLAY* display = NULL; if(!al_init()) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize allegro", NULL,NULL); return -1; } display = al_create_display(WIDTH,HEIGHT); if(!display) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize display", NULL,NULL); return -1; } HWND hwnd = al_get_win_window_handle(display); if(hwnd == NULL) { MessageBox(NULL, "Window Creation Failed!", "Error!", MB_ICONEXCLAMATION | MB_OK); return 0; } ShowWindow(hwnd, nCmdShow); UpdateWindow(hwnd); while(GetMessage(&msg, NULL, 0, 0) > 0) { TranslateMessage(&msg); DispatchMessage(&msg); } return msg.wParam; } LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) { static bool bIsCaptured; static POINTS ptsBegin; static POINTS ptsEnd; switch(msg) { case WM_LBUTTONDOWN: SetCapture(hwnd); bIsCaptured = true; ptsBegin = MAKEPOINTS(lParam); return 0; case WM_MOUSEMOVE: if(wParam & MK_LBUTTON) { if(!Line::Erasable()) { return 0; } Line::ErasePreviousLine(); ptsEnd = MAKEPOINTS(lParam); Line::DrawLine(new long(ptsBegin.x),new long(ptsBegin.y),new long(ptsEnd.x),new long(ptsEnd.y)); } break; case WM_LBUTTONUP: bIsCaptured = false; ReleaseCapture(); break; case WM_ACTIVATEAPP: { if(wParam == TRUE) { if(bIsCaptured){ SetCapture(hwnd);} } } break; } return 0; }

    Read the article

  • Ubuntu 11.10 boot: xhost: unable to open display

    - by paulus_almighty
    I've had this papercut for a while now, it's time it was fixed. When I boot up Ubuntu, choosing "Ubuntu...generic" from the grub screen, Ubuntu fails to load. It just sits at the driver/module loading screen. What seems to be the most significant line in this output is "xhost: unable to open display" If I choose "Ubuntu...(recovery mode)" from grub then it loads OK. I don't get why this is. Out of interest I tried enabling boot error logging with #/etc/default/bootlogd BOOTLOGD_ENABLE=Yes but I'm not seeing anything in that file. ETA: I've had this problem since fresh install of 11.10. Here's lshw: $ sudo lshw -C display *-display description: VGA compatible controller product: GF104 [GeForce GTX 460] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:03:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f6000000-f7ffffff memory:e0000000-e7ffffff memory:ec000000-efffffff ioport:bf00(size=128) memory:e8000000-e807ffff

    Read the article

  • Display settings problems with Ubuntu 14.04 LTS

    - by DontUSASme
    For whatever reason (this was working correctly on Ubuntu 12.04 LTS) when I try to set my displays on top of each other in the settings, it won't allow to place them on top of each other. When I click "apply" I get the error message "Could Not Set Configuration Mode for CRTC 63." Can anybody help me with this? It wont let me set the two displays on top of each other, but it will allow me to place them side to side. Also, I get a random "Unknown display" as well. This was not existent in 12.04 LTS and I have no idea what it is, seeing as how the only screens that are in use, or plugged up for that matter, is my laptop's display (1366x768) and my Samsung TV display (1360x768) thru HDMI.

    Read the article

  • Dell XPS L502Xnot detecting monitor-TV

    - by Guilherme Z. Santos
    I'm running Ubuntu 12.04 LTS on a Dell XPS L502X and when I connect the HDMI cable from the TV to the computer Ubuntu detects nothing at all, It works perfectly fine in Windows 7 though. I've already went to the Display control, plugged and unplugged the TV, clicked the Detect Displays button, and nothing. Do I have to activate the HDMI output or something? Because I used another computer with a VGA output and it worked perfectly.

    Read the article

  • Displaylink USB show "Logo / Loading" on monitor

    - by Ken Le
    I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

    Read the article

  • Replace LightDM with MDM on Ubuntu 13.10

    - by Daniel
    I'm trying to replace LighDM with MDM on Ubuntu 13.10, but there already is package in Ubuntu sources called mdm. It's not display manager, but "The Middleman System"... So the PPA install doesn't work. I tried installing .deb package and it changed login screen, but gave me an error message after login and then X stopped. I had to revert back... Any ideas on how to install mdm on Ubuntu 13.10...???

    Read the article

  • Automatically change resolution when not in dock

    - by jwir3
    I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 ([email protected]) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Desktop is too big for my screen

    - by user2829148
    I have an acer widescreen monitor set at 1024x768 running Ubuntu 12.04.4 precise, I have adjusted the resolution to match in display settings however the ubuntu side bar and files are all enlarged. its like it has zoomed in. I have read through all other related posts and cannot come up with a fix. The desktop was fine up until 3 days ago then it changed and I have no idea why, can someone help? Thanks

    Read the article

  • Resetting "HDD Warning???" with Zalman ZM-VE400 external case

    - by 0xC0000022L
    Whenever I turn on (or plug in) the Zalman ZM-VE400 I have, it shows HDD Warning???. Sometimes briefly, sometimes until the Menu button is pressed. The case contains a SSD drive and as far as I understand the warning relates to the S.M.A.R.T. status of which this drive doesn't support all parts. How can I reset the warning so I don't receive it every time when turning on the drive? Firmware reports: V400_01_040_N Here's what I have tried so far: Unplug and plug back in Open the case and remove the SSD, then put it back in Press the button on the back side (cover removed) while plugged in Press the button on the back side (cover removed) while not plugged in USB Connect = Refresh = Enter USB Connect = Safe Removal = Enter Advanced = Umount VHDD = Enter

    Read the article

  • Is it safe to just yank an external hard drive if you know nothing is writing to it?

    - by Nathaniel
    Yes, I know somewhat about the possibility of data corruption if there was data that hadn't been all written to it. But I just saw this: Note:If u remove HDD(not USB sticks) without safely removing it,its not healthy and will affect life. So, if nothing is actually writing to it, could there actually be any harm caused by not safely removing or unmounting it before disconnecting it?

    Read the article

  • How to upgrade OS on Mac Mini with external USB Drive?

    - by David
    We have a G4 Mac Mini, circa 2005, running Mac OS X 10.4 Tiger, and we want to upgrade to 10.5 Leopard. We have a Leopard install disk, but the optical drive in this mini is broken. So we transferred the install disk image to a USB HDD, but now we can't figure out how to boot off it. From what I've read in Mac forums, some PPC Macs, including some G4's, have been able to boot from USB, even though it sounds like this wasn't officially supported, and it may well depend on the specific model of USB drive and Mac. My Mac says CPU is "PowerPC G4 (1.2)" and Boot ROM is "4.8.9f4". I was hoping I might just find somebody here who had that same Mac Mini and find out if they could make it work. I'd especially like to know any specifics about the USB drive they found success with. Any insights at all would be appreciated. Thanks.

    Read the article

  • Why is writing to my external hard drive slow, while benchmarks show fast writing?

    - by matix2267
    I have an iOmega eGo 320GB portable drive connected through USB2.0 to my laptop running Windows Vista. It's been working fine for quite some time until recently it became very slow when writing e.g. when copying ~300MB movie over to the drive at first it is extremely fast but it actually doesn't write it only puts in cache and then hangs on last 10-20MBs for about a minute. When copying larger files it's the same story: starts fast but then slows down to ~5MB/s (sometimes even slower down to 2MB/s). Strange thing is that I have always had caching disabled for this drive (it was disabled by default and I never bothered changing it). At first I thought that the disk is dying so I checked S.M.A.R.T. values and everything is fine there. I also run chkdsk and it seemed to fix the problem - it worked fast for a few minutes but then it slowed down again. I also tried plugging it into another USB port - no difference. Additionally I noticed that reading under certain circumstances is sometimes slower e.g. loading times for some games are ~10 times longer, whereas simple copying files from this drive to my internal HDD is fast. I ran a speed benchmark using CrystalDiskMark with a 5x100MB run and strangely got these results: read write (MB/s) Seq 33.05 28.25 512k 17.30 15.27 4k 0.267 0.372 4kQD32 0.510 0.260 This is different from what most other people have (I've found many threads about slow disk write while googling but all of them were slow on benchmarks too) which is why I decided to post this problem here. BTW most of the time when writing (or sometimes reading) the activity led is mostly idle (blinks a while and then stops for longer, sometimes has slower blinks ~1 sek, sometimes goes off for a few seconds - extremely long blink :) ) but when benchmarking, defragmenting or just reading (copying from this drive, installing apps from installers there, watching HD videos) it is blinking really fast (like it should) and there are no slowdowns. It shouldn't be driver issue unless stock Windows drivers have some issues I'm not aware of.

    Read the article

  • Is there a way to detect Layout or Display changes in WPF?

    Hello! I am trying to check how fast the Frame control can display a FixedPage object when it is assigned to Frame.Content property. I plan to check the tick count before and after the assignment to the Content property. Example: int starttime = Environment.TickCount; frame1.Content = fixedpage; int endtime = Environment.TickCount; The problem is that the assignment to the Content property might be asynchronous and returns immediately therefore i get a zero amount of time. The rendering of the FixedPage however visually has a lag time from assignment of the Content property up to the point where the FixedPage appears on screen. The Frame.ContentChanged() event is no good either because it gets triggered even before the FixedPage appears on screen so it's not accurate. I'm thinking of detecting the change on the window or control's display instead in order to get the time when the FixedPage is actually displayed on screen. Is there a way to do this in WPF? Thanks!

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >