Search Results

Search found 25196 results on 1008 pages for 'hard drive cache'.

Page 28/1008 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• How can I add a second hard drive to a previously configured UEFI/ACHI Windows 8 machine?

  - by pflyer

  Recently purchased a new Windows 8 PC. It came with one hard drive. I want to a second hard drive to it. This second hard drive is my data hard drive from my previous computer. However, I have run into issues when the system accesses it. The drive is found in the BIOS. But is not seen by Explorer or Disk Management. I have added the drive to the next available SATA slot: SATA 2. The machine is a UEFI/ACHI based machine. In my reading I have found people documenting the following: 1) adding multiple partitioned hard drives (like mine is) to UEFI based machines is not possible 2) I have seen it suggested that you can only add blank hard drives to UEFI based machines. However, in doing so, I did not have success. I tried to add it as a hard drive with unallocated space and then as a hard drive with a single simple partition. Both attempts failed. My ultimate question: What is the proper procedure for adding a second hard drive to a UEFI/ACHI machine? I do not want to reinstall the OS and start from scratch as I have seen suggested elsewhere. There has to be a way to accomplish this without all that hassle. Thanks in advance for your help.

  Read the article

• Clone a Windows Installation to a 3TB Hard Drive; MBR to GPT

  - by DanBlakemore

  I have Windows 7 Professional 64-bit installed on my desktop. Unfortunately for me and my wallet my hard drive is failing. I have purchased a 3TB hard drive as a replacement for my current 2TB drive. I would like to avoid as much hassle as possible in moving to this new drive so I would like to copy my current partition to the new drive using Gparted. The problem is that I suspect that my current partition is MBR, and I need GPT on my new drive since it is 3TB. Can I simply copy the MBR partition onto the new disk and then convert it to GPT after the fact (can you even convert the type of a partition)? Or would I need to somehow copy the contents of the partition into a GPT partition on the new drive? How do I go about making this transistion? Also, are there any issues I should be wary of booting to a GPT partition? If it matters, my motherboard is 1 year old as of May, 2012. Edit: My motherboard is 1 day old. My old one does not have UEFI compatibility, so I decided to make an upgrade to Intel today given that I would need a UEFI motherboard to use my new HDD. How much can I use a dying hard drive (bad sectors according to Hitachi Drive Fitness Test)? I have assumed not at all, to be safe.

  Read the article

• SQL Server Manageability Series: how to change the default path of .cache files of a data collector? #sql #mdw #dba

  - by ssqa.net

  How to change the default path of .cache files of a data collector after the Management Data Warehouse (MDW has been setup? This was the question asked by one of the DBAs in a client's place, instantly I enquired that were there any folder specified while setting up the MDW and obvious answer was no as there were left default. This means all the .CACHE files are stored under %C\TEMP directory which may post out of disk space problem on the server where the MDW is setup to collect. Going back...(read more)

  Read the article

• Would there be any negative side-effects of sharing /var/cache/apt/ between two systems?

  - by ændrük

  In the interest of conserving bandwidth, I'm considering mounting a VirtualBox host's /var/cache/apt as /var/cache/apt in the guest. Both host and guest are Ubuntu 10.10 32-bit. Would there be any negative consequences to doing this? I'm aware of the more robust solutions like apt-proxy, but I'd prefer this simpler solution if it's possible in order to spare the host the overhead of running extra services.

  Read the article

• Boot drive not found issue after cloning using Apricorn EZgig

  - by TomWilsonFL

  A couple days ago I cloned a drive for someone using the EZgig software. Usually this goes without a hitch, but this particular drive I was cloning is quite old. When I restarted with the new drive I received the typical bootable disk not found message, so I turned it off, messed with the BIOS, restarted and it came up fine. That night I was working remotely on the computer and had to restart it. It didn't come back up; not a good sign. When the user came to the computer in the morning it was giving the same message. I have found that to make the computer boot, all I have to do is go into the BIOS and "Load Defaults", then restart. It will boot and runs great. Any thoughts on what is causing this situation? Is it MBR corruption? Are some settings being saved in the CMOS? A couple points of mention: I have already attempted looking for a BIOS update for the computer, but the newest is already installed (from 2003). When the computer reboots it either shows "None" for Primary Master, or sometimes it will just not show anything. Thanks, Tom

  Read the article

• zfs pool error, how to determine which drive failed in the past

  - by Kendrick

  I had been copying data from my pool so that I could rebuild it with a different version so that I could go away from solaris 11 and to one that is portable between freebsd/openindia etc. it was copying at 20mb a sec the other day which is about all my desktop drive can handle writing from the network. suddently lastnight it went down to 1.4mb i ran zpool status today and got this. pool: store state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scan: none requested config: NAME STATE READ WRITE CKSUM store ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 c8t3d0p0 ONLINE 0 0 2 c8t4d0p0 ONLINE 0 0 10 c8t2d0p0 ONLINE 0 0 0 it is currently a 3 x1tb drive array. what tools would best be used to determine what the error was and which drive is failing. per the admin doc The second section of the configuration output displays error statistics. These errors are divided into three categories: READ – I/O errors occurred while issuing a read request. WRITE – I/O errors occurred while issuing a write request. CKSUM – Checksum errors. The device returned corrupted data as the result of a read request. it was saying low counts could be any thing from a power flux to a disk event but gave no suggestions as to what tools to check and determine with.

  Read the article

• jboss cache as hibernate 2nd level - cluster node doesn't persist replicated data

  - by Sergey Grashchenko

  I'm trying to build an architecture basically described in user guide http://www.jboss.org/file-access/default/members/jbosscache/freezone/docs/3.2.1.GA/userguide_en/html/cache_loaders.html#d0e3090 (Replicated caches with each cache having its own store.) but having jboss cache configured as hibernate second level cache. I've read manual for several days and played with the settings but could not achieve the result - the data in memory (jboss cache) gets replicated across the hosts, but it's not persisted in the datasource/database of the target (not original) cluster host. I had a hope that a node might become persistent at eviction, so I've got a cache listener and attached it to @NoveEvicted event. I found that though I could adjust eviction policy to fully control it, no any persistence takes place. Then I had a though that I could try to modify CacheLoader to set "passivate" to true, but I found that in my case (hibernate 2nd level cache) I don't have a way to access a loader. I wonder if replicated data persistence is possible at all by configuration tuning ? If not, will it work for me to create some manual peristence in CacheListener (I could check whether the eviction event is local, and if not - persist it to hibernate datasource somehow) ? I've used mvcc-entity configuration with the modification of cacheMode - set to REPL_ASYNC. I've also played with the eviction policy configuration. Last thing to mention is that I've tested entty persistence and replication in project that has been generated with Seam. I guess it's not important though.

  Read the article

• Zend Metadata Cache in file

  - by Matthieu

  I set up a metadata cache in Zend Framework because a lot of DESCRIBE queries were executed and it affected the performances. $frontendOptions = array ('automatic_serialization' => true); $backendOptions = array ('cache_dir' => CACHE_PATH . '/db-tables-metadata'); $cache = Zend_Cache::factory( 'Core', 'File', $frontendOptions, $backendOptions ); Zend_Db_Table::setDefaultMetadataCache($cache); I can indeed see the cache files created, and the website works great. However, when I launch unit tests, or a script of the same application that perform DB queries, I end up with an error because Zend couldn't read the cache files. This is because in the website, the cache files are created by the www user, and when I run phpunit or a script, it tries to read them with my user and it fails. Do you see any solution to that? I have some quickfix ideas but I'm looking for a good/stable solution. And I'd rather avoid running phpunit or the scripts as www if possible (for practical reasons).

  Read the article

• Hard disk with bad clusters

  - by Dan

  I have been trying to backup some files up to DVD recently, and the burn process failed saying the CRC check failed for certain files. I then tried to browse to these files in Windows explorer and my whole machine locks up and I have to reboot. I ran check disk without the '/F /R' arguments and it told me I had bad sectors. So I re-ran it with the arguments and check disk fails during the 'Chkdsk is verifying usn journal' stage with this error: Insufficient disk space to fix the usn journal $j data stream The hard disk is a 300GB Partition on a 400GB Disk, and there is 160GBs of free space on the partition. My os (Windows 7) is installed on the other partition and is running fine. Any idea how I fix this? or repair it enough to copy my files off it?

  Read the article

• osx split external hard drive partition

  - by Bart

  Hi, I currently have a 640GB external HD that has 1 partition formatted as HSF+ Now I want to split some of the free space into a new FAT32 partition, without having to reformat the whole HD and losing all my data. I read that I'm supposed to be able to add new partitions in the Hard Disc Utility by clicking the "+" sign, without any loss of data. But in my case the "+" is not clickable and it says that this partition cannot be altered. Can anyone tell me how to proceed. Or is it impossible without reformatting the whole disc? Thanks ps: I'm running osx snow leopard 10.6.6

  Read the article

• Hard disk problem pop up warning

  - by Leonardo

  I'm using windows 7 ultimate and it started to give me this hard disk problem warning that i had before in another OS that made me disable smart, it has been over a year since i did and my pc is running ok so my HDD is ok. all i wanna do is disable this warning that popsup while i'm gaming or doing anything else. thanks for your help :) Edit: (adding in info that was added as an answer instead of part of the question) So it's me again and i agree with both answers but i don't have the money right now to buy a new one, and yeah it could die now, i can't say. so i uploaded an image of hd tune pro scan on my HDD thanks again! anymore information would be even better, bye.

  Read the article

• What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives?

  - by Jason Fitzpatrick

  From tiny laptop hard drives to beefier desktop models, traditional disk-based hard drives have a very bold warning on them: DO NOT COVER THIS HOLE. What exactly is the hole and what terrible fate would befall you if you covered it? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

  Read the article

• Windows XP Installation issue - cannot find hard disk

  - by Marco

  A friend of mine gave me a laptop with Windows 8 installed and nothing else. I don't like it so I am trying to remove it by installing Windows XP. I have a windows XP installation CD that I have used before and worked fine, but didn't work when I tried to install it on the Windows 8 machine. It keeps telling me I don't have a drive to install to. Then I log into Windows 8 again and install check partitions. I found 2 and tried to make a new one but it will only let me make one of 69mb. Next, I tied to find a way to go back to XP with BCD install and try to set the boot loader for XP but it wasnt there. Somehow I deleted the bootloader for Windows 8 and now it asks me for a recovery tool for media. I am not familiar with the laptop specs, but it is a Toshiba with about 250GB storage, and above 1GHz processor.

  Read the article

• Fix bad blocks on Mac hard disk

  - by Andrew Vit

  I have a hard disk that I scanned with TechTool and it reports one bad block. As far as I can tell, TechTool only scans and reports a failure. It doesn't fix anything. Back in the day, Norton Disk Doctor did the job of scanning and flagging (remapping) bad blocks on the Mac. Today we have various tools for fixing up HFS+ directory errors (Disk Utility, fsck, DiskWarrior, TechTool), but I don't know of any tool that will do a surface scan and fix the bad blocks too. What software is available for this? If I know the address of the bad block, is there a low-level terminal utility for marking it?

  Read the article

• Need to store and backup HD vid files. But need to access them alot.

  - by Mike

  I've had my 700 Gb HDD ever since I bought my computer so partitioning it is out of the question. What I need is a place to keep my HD vid files so when I edit, I don't get a long load time in the editing software. But I also need to keep a back-up of all my other important files which I haven't been doing. Should I buy an additional internal drive JUST for vid files and buy an external for backup of all my files? What are my best options?

  Read the article

• HDD is not recognized/initialized via USB, only via SATA - is a reformat through USB a bad idea?

  - by Wuschelbeutel Kartoffelhuhn

  I have a 4TB Hitachi HDD that I purchased in Europe (I use it as a backup disk); I use Windows 7. When I connect it to a SATA port, it is recognized in Windows Explorer and gives no problems, even after transferring 3TB at a time or after being on for days. When I connect it via a SATA-to-USB2.0 adapter, it is also recognized, but when I transfer a large amount of data, it will intermittently stop being recognized by Windows Explorer and cancel the transfer. When I connect it via an external enclosure (which is technically a SATA-to-USB3.0 adapter), it does not display at all in Windows Explorer, but Disk Management will show the drive, albeit uninitialized (prompts for format). I only got the external enclosure because I want to backup my files more conveniently (instead of having to open the computer case each time). Do you advise against reformat/initialization via the external enclosure? Can it screw up things in an irrevocable way (Master Boot Record etc.)?

  Read the article

• Can hard drives experience magnetic interference from a server chassis?

  - by eek142

  I'm currently building a server, and it's exhibiting the weirdest behavior with the hard drive. It is a 2U case, and I have trouble trouble accessing the Seagate SATAIII hard drive when it is in the bottom slot of the hard drive cage. The case is made of galvanized/anodized steel. I thought the drive was DOA, but then I swapped it into the top slot, and the problem was solved--the system had no trouble recognizing the drive anymore! This got me thinking: Is it possible that the magnetic field from the chassis was affecting the hard drive's functionality? I only have this problem with the mechanical hard drive, not the SSD. Could it be because the chassis is made of steel? I'm baffled.

  Read the article

• How to detect hard disk failure?

  - by Devator

  So, one of my servers has a hard disk failure. It's running software RAID, the system locked up and according to /proc/mdstat (and /var/log/messages), it's really down: Personalities : [raid1] md2 : active raid1 sdb2[1] 104320 blocks [2/1] [_U] md5 : active raid1 sdb5[1] 2104448 blocks [2/1] [_U] md6 : active raid1 sdb6[1] 830134656 blocks [2/1] [_U] md1 : active raid1 sdb1[1] 143363968 blocks [2/1] [_U] and Nov 5 22:04:37 m38501 smartd[4467]: Device: /dev/sda, not capable of SMART self-check However when I do smartctl -H /dev/sda, it passes the test. It also passes the test with smartctl --test=short /dev/sda. So, is smartctl a broken testing tool, or am I doing something completely off?

  Read the article

• renaming hard drives (sdc to sdb) on the fly

  - by w00t

  ata2: link is slow to respond, please be patient (ready=0) kernel: [2761026.198796] ata2: soft resetting link kernel: [2761031.226669] ata2.00: disabled kernel: [2761031.226720] ata2: EH complete kernel: [2761031.226753] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK After receiving the error above, I couldn't access /dev/sdb anymore. Not wanting to restart the server, I rescanned for the device using echo "- - -" > /sys/class/scsi_host/host1/scan and it readded the drive as /dev/sdc. From what I have found, I need to use echo "scsi add-single-device 0 0 3 0" > /proc/scsi/scsi, "3" being the SCSI ID which corresponds to sdb. Everything nice up to the point I execute the command and get -bash: echo: write error: Invalid argument. All the solutions point to using this method, but I am unable to. Any other method available? Debian 5.0.8 - 2.6.26-1-686

  Read the article

• How to use BT or emule across 2 or more hard drives?

  - by the searcher

  One difficulty with BT or emule is that, when the hard drive is full, we constantly need to move older files to a new hard drive so that we can download newer files. We can change BT or emule's setting so that the folder for downloading points to the new hard drive, but then, what if emule haven't finished downloading for some files that are hard to find, and it is 92% done... in that case, we would like to keep the old setting so that when the last 8% arrives, it can go into the correct file. (and same for BT, if we haven't finished some file or if we want to seed something later). So is there a good way to let BT or emule point to 2 hard drives, or somehow let the new hard drive "merge" into the existing hard drive / folder?

  Read the article

• Weird problem, special characters coming after formatting the hard drive, computer isn't starting 0_

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting (quick format) and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• Windows - Delayed Write Failed error on USB hard drive

  - by ndngrd

  I've got a new Verbatim 1.5TB USB hard drive (Samsung HD154UI) and I'm finding myself completely unable to fill it. I'm using Windows XP. Whenever I try to copy a load of files over, it works for some time (will copy over between 20 and 90GB) but eventually stops with an error saying "The specified path is too deep" - the specified is not too deep, there's nothing more than 2 dirs deep that I'm copying. A balloon pops up at the bottom saying "Windows - Delayed Write Failed" telling me the data could not be copied. This wouldn't be too bad if I could just restart the transfer, but after this error has happened I can't write anything else to the disk - including if I eject it and then connect it to another machine. It just seems completely locked. The only way I can unlock it is to delete everything that I was copying to it. I've tried various USB cables and copying from different machines, and the same thing keeps happening.

  Read the article

• How to access files on a drive from an older system, mounted in a new system?

  - by David Thomas

  I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

  Read the article

• What is the easiest (preferably) graphical way to clone a hard drive to an image that I can open later?

  - by Roland Taylor

  I need to make a (preferably) mountable image of an 80GB Hdd, and store it on another hard drive. Is there some way that I can do this without losing data? Thanks for the answers I've received so far. The system in question cannot be used right now due to a problem with the power button :( [ugh!], but the information will really be useful =)! Thanks to all who answered so far, if anyone else wants to give me some tips I'll leave this open for a bit, as I still have not yet been able to clone the drive.

  Read the article

• Weird problem, special characters after formatting the hard drive, computer not starting 0_o

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >