Search Results

Search found 4440 results on 178 pages for 'intel atom'.

Page 28/178 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Screen resolution stuck at 1024x768

  - by Dananjaya

  I just updated from Ubuntu 10.10 to 11.04 and have an issue regarding the screen resolution. I have Intel integrated gfx chip and my monitor supports resolutions larger than 1024x768. (in 10.10 I've been using 1280x1024) But as soon as I upgraded, I'm stuck with 1024x768 resolution and seems I can't change it. running xrandr In terminal yields the following results, Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x800 58.1 + 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 59.9 + 1360x768 60.0 1024x768 75.1 72.0 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 1280x1024_60.00 (0xce) 109.0MHz h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz What maybe the problem? Is it a bug? What kind of steps I should take in order to get a higher resolution? (changing xorg.conf maybe?) Any insight is highly appreciated. Thanks in advance. UPDATE Screenshot after running xrandr --addmode VGA1 1360x768 As you can see, side bar is not completely visible and Ubuntu logo at the task bar is missing. Also when you open an application, the Task bar of the application (where it should go to the top panel) is missing as well..

  Read the article

• Screen doesn't turn back on after resume on a Lenovo Thinkpad T420

  - by Wojtek

  Every time I suspend my notebook (Lenovo Thinkpad T420 - Intel HD graphic card) on Oneiric Ocelot 11.10 and turn it back on, the screen is black. The backlight is on and the system itself loads fine, but the display somehow doesn't get back. The first time after a fresh reboot the screen isn't black, it is mostly white/light-gray and it looks a bit like a distorted image. The pixels fade in until it gets almost completely light-gray. I've got a workaround for this: I switch to the first terminal (CTRL+ALT+F1) and back to X (CTRL+ALT+F7). In most cases that helps. Sometimes, when there's still a problem, I log in on the first terminal and run "unity --reset". Then go back to X - this helps always. I can tell that the system comes back, because I can log in with my fingerprint reader (or wait a bit and put in the password) "blindly", then do the workaround - I am logged in after the screen comes back. So it's only the display that is not working. Any help or advice where to look would be appreciated.

  Read the article

• Ubuntu won't fit 10" netbook's native display

  - by Daniel

  I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is some bits of the system doesn't fit the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as I can see the Unity Launcher. My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, the desktop area is lowered, with bits of it hidden beneath the screen; & there's a black space left at the top of the screen. I had to revert to the old setting 1024x768 to push the desktop upwards and remove the black space.

  Read the article

• External display resolution issue

  - by Steven

  I'm new to Ubuntu. I've 'dabbled' in the past but Windows was annoying me too much so I finally made the change. One thing I use my laptop for is outputting the screen onto an external monitor. In Windows this usually works fine (but when there is an issue, it's a pain to resolve and has crashed my computer on many occasions). In Ubuntu it's a very simple case of "plug and play" because it displays the content immediately with no major problems. However, I can only alter the resolution of the external display to 4:3 formats, whereas the external monitor is 16:9, so the picture is stretched. In Windows there's loads of resolutions to choose from. If I disable the laptop's screen, it still doesn't allow me to display the correct resolution externally (on VGA). Further to that, if I close the laptop it keeps the external screen as it is, but when I reopen the laptop, the laptop screen doesn't turn back on until I restart. If it's a video I am watching, I can use VLC to alter the aspect ratio so the video looks fine, but it's quite an annoying work around. I used terminal to find my graphics controller, which is "Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)" (not great, I know... the laptop was a free gift with my mobile!) Any idea of how I can get the resolution on the external monitor to be correct?

  Read the article

• Connecting / disconnecting DisplayPort causes crash

  - by iGadget

  I wanted to file a bug about this using ubuntu-bug xserver-xorg-video-intel, but the system prompted my to try posting here first. So here goes :-) While the situation in Ubuntu 11.10 was still somewhat workable (see UI freezes when disconnecting DisplayPort), in 12.04 (using Unity 3D) it has gotten worse. The weird part is that during the 12.04 beta's, the situation was actually improving! I was able to successfully connect and disconnect a DisplayPort monitor without the system breaking down on me. But now with 12.04 final (with all updates), it's just plain terrible. When I now connect an external monitor using the DisplayPort connector on my HP ProBook 6550b, it only works sometimes. Most times (but not always!) the screen just goes blank and the system seems to crash (not even CTRL+ALT+F1 works anymore). Only a hard shutdown by keeping the power button pressed for several seconds and then a restart gets me out of this. I suspect the chances of the system crashing become higher as the system's uptime increases, especially when there have been one or more suspend-resume cycles (although I have also experienced this bug once from a cold boot). Disconnecting is roughly the same as with 11.10 (see issue mentioned above), with the difference that if I resume from suspend, I no longer have to do a CTRL+ALT+F1, ALT+F7 cycle to get my screen back. So what more can I try? Or should I just go ahead and file the bug anyway?

  Read the article

• WiFi can't connect after suspend

  - by CyberOPS

  I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. After I installed Ubuntu 12.04.1 I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Basically here's what happens: I can see all the networks in my area. When I try to connect to one of them it never connects, it keeps disconnecting. After a little bit it asks for the password again but its already filled in correctly. If I hit okay it will do the exact same thing again. So does anyone know how I can get this fixed? INFO: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (*Not using Wubi*) Wireless Card Driver: iwlwifi UPDATE: I was about to reinstall with the DVD I made with the ISO from the official source but discovered the same issue happens on the disc's Ubuntu preview feature. I still was unable to fix it as before. I also tried the Xubuntu demo, and the same. Re installing the driver hasn't worked either.

  Read the article

• 2 folders in Sys/Class/Backlight?

  - by zebrapie

  ISSUE: Backlight brightness does not change. More Detail: Brightness will not change, using both 'System Settings-Screen', or FN keys (Brightness bar shows and moves, but screen brightness does not change). Notcied a post in this thread (http://ubuntuforums.org/showthread.php?t=1866283) about having multiple folders in Sys-Class-Backlight... I HAVE TWO FOLDERS TOO! 'intel_backlight' and 'acpi_video0' Using the function keys, alters the value in the acpi_video0's 'Brightness' file - But doesn't actually alter the brightness of the screen. If I add 'backlight=vendor' in Grub, my function keys then edit the value in the 'Intel_Backlight brightness file. - But again doesnt actually change the brightness of the screen. Computer: Fujitsu Siemans Pi2515, Intel Integrated Graphics, No hdd partition. Already Tried: -Editing grub to contain: acpi_osi=Linux acpi_backlight=vendor -http://ubuntuguide.net/change-screen-brightness-with-fn-key-in-ubuntu-11-0410-10 -sudo apt-get install acpi -$ sudo setpci -s 00:02.0 F4.B=20 -Brightness does not adjust in fallback mode either. -Reinstalling OS, Using Linux Mint (Same problem). -Upgrading and downgrading BIOS. Many thanks for reading, I understand this problem may need a bit of a Linux pro to sort. If anyones up for the challenge i'll spend any amount of time being walked through this, posting results. Don't want to give up here!

  Read the article

• How do I troubleshoot system slowness seen when viewing PDFs or videos?

  - by asp

  Whenever I watch videos, either online of local via Totem and/or open PDF files using evince. The system gets really, really bogged down. All apps get really slow, menus take forever to display, switching windows gives me time to make a coffee, etc. I have a couple of bug reports open on this, but what do I need to do to really troubleshoot the issue? I've purged Adobe Flash from the system, but YouTube HTML5 videos still have the issue. A bunch of PDFs saved locally trigger the problem. And to (temporarily) remove the slowness, I need to shutdown the computer, breath for a few minutes, then restart. A simple reboot does not do the trick. How can I identify the cause? This only started on 13.04. I've had Ubuntu on this machine for a year without a problem until "upgrading" to 13.04. I am not a programmer, but I suspect an issue with the Intel video driver. Is there something I can run which will diagnose this, or are there concrete steps I can follow to find the culprit?

  Read the article

• Wireless on Medion MD96500 (Intel® PRO/Wireless 2200BG) running Windows 7

  - by Jakob Schmitt

  I just installed Windows 7 (32 bit) on a Medion MD96500 (Intel 2200BG Wireless Card) and then installed the Windows Vista (32 bit) driver. Now, in the "device driver window", the Wireless Card is listed as working/active. If I want to set up a wireless connection, however, I always get the error message "No connections available". Pushing the hardware-switch (or however that thing is called, right next to the keyboard) does not seem to have any effect.

  Read the article

• Monitor Mode on the Intel Centrino(R) Advanced-N 6205 (WEP Penetration) On Windows

  - by WindowsEscapist

  Can anyone tell me a way to do WEP hacking (legal, of course) (on my own wireless connection, for the purposes of this question) with Wireshark or similar programs on an Intel Centrino Advanced-N 6205? (Laptop is Acer Aspire 5750-6866.) According to the programs, I cannot accomplish this (monitor mode) but seeing as it is a fairly recent wireless card (should be able to support this) are there any cracked drivers available or does anyone have the knowledge to make one? Much appreciated! Thanks.

  Read the article

• Is the PowerPC (G4) architecture better than Intel x86 architecture for certain types of application

  - by ralphc

  I have a PowerMac G4 from around the year 2000. It's a serviceable Unix machine but I don't do much with it since I have plenty of Pentium 4 machines around with Linux on them. I was wondering if the PowerPC based machine is capable of handling certain tasks faster or "better" than Intel based machines, or is it just another computer to use. I have OSX 10.4 Tiger for it, and I don't mind installing Yellow Dog Linux or UbuntuPPC if that will make it more useable.

  Read the article

• intel dg31pr heat issues

  - by user17077

  Hi there, I have got Intel 8400 processor installed on a DG31PR board. My board gets hot quite quickly and the temperature hovers around 50-65 C at normal load. I have got a good cooling system but I wonder if its a problem in my mobo. Can you guys kindly suggest what to do? My processor runs fine and stands at 30-32 C. Thanks. Regards, Adnan

  Read the article

• Intel Pentium D

  - by Paul

  My processors is an Intel(R) Pentium(R) D CPU 3.00GHz. Pentium D means that my processor is a Dual Core?

  Read the article

• Intel Core 2 duo / AMD athlon X2 parallel processing capability

  - by prakash

  Does Intel Core 2 duo/ AMD athlon X2 really have 2 separate processors? i.e are they capable of doing real parallel processing? What I don't understand is the difference when somebody says Cores or Processors.

  Read the article

• Need Windows XP VGA driver for i3 Haswell

  - by AFH

  Background: I have recently upgraded my hardware because the previous Pentium system started failing to the point that it would not run long enough to boot. It was obviously a hardware fault, but I had no way of knowing whether it was in the motherboard, CPU or memory. Not all the components were now available, so I decided to replace all three. In order to get some benefit from the expenditure, I though I would put in faster components, and for future-proofing went for recently released ones: MSI Z87-G41-PCMate and Intel i3-4130 with 4400 HD graphics. The system performs excellently with Ubuntu 13.10, so I know there are no hardware problems, but I need to continue running XP because it runs several thousand pounds (UK) worth of software, which meets my needs more than adequately: in some cases there is no longer support for later Windows releases, and in most others an expensive and to me unnecessary upgrade is required. Problem: The motherboard specifications claim Windows XP support for the live driver update utility, which misled me into believing that XP drivers were available. Not true: Intel have apparently refused to provide XP drivers for Haswell chips. The update program runs on XP, but finds no suitable Intel drivers. The system is more or less running on the default fail-safe VGA driver, but DirectX will not load, which stops a number of my applications from running. I have been trawling the internet for a month now, but I have not found a graphics driver which will load successfully: all show "This device cannot start. (code 10)". I don't need HDMI support: my monitor is 1280x1024 and connected through the VGA port, so all I need is a driver which will handle this resolution well enough to support DirectX. Has anyone found a driver which will do this? Please don't reply with information found from internet searches, unless you have actually solved this problem: be assured that I have been all round the houses looking at solutions which others have reported as working, but none of them does for me. Incidentally, I did find an Intel HD sound driver which XP accepts (winxp_145111.exe from Intel), though without connecting to an HDMI port on a TV or sound system I have no idea if it works in practice. However, the graphics section of the same driver fails, like all the others I've tried.

  Read the article

• HP Smart Array p400i with Intel X25-M 160 SSD

  - by user67304

  I have a pair of x25-M 160 Intel SSD's in an HP DL360 G5 with a p400i Smart Array running 512 BBWC. The disk performance I am getting on this box and another identical one does not come close to matching the same two drives running through a cheap 3ware RAID card. Any idea? I have played with the cache settings, but nothing allows me to get the same results. It seems like the Smart Array controller is the bottleneck.

  Read the article

• HP Smart Array p400i with Intel X25-M 160 SSD

  - by user67304

  I have a pair of x25-M 160 Intel SSD's in an HP DL360 G5 with a p400i Smart Array running 512 BBWC. The disk performance I am getting on this box and another identical one does not come close to matching the same two drives running through a cheap 3ware RAID card. Any idea? I have played with the cache settings, but nothing allows me to get the same results. It seems like the Smart Array controller is the bottleneck.

  Read the article

• Intel Core 2 Duo E6600 versus AMD Athlon II X2 3GHZ

  - by Billy ONeal

  Hello :) I have an Intel Core 2 Duo E6600 (2.4GHZ) in my current desktop, and I have a newer machine with an AMD Athlon II X2 3.0GHZ. I'm wondering how the systems will perform in comparison to one another. I'd like to use the AMD because it's 45nm and uses less power, but I don't want to do so at a loss in perforamnce. Which should perform better? Billy3

  Read the article

• How to remove RAID flag on unstriped drive without losing data?

  - by Alex Folland

  I have a Gigabyte Z68X-UD4-B3 motherboard. It advertises this new thing called "XHD", which is like RAID but makes a SSD and traditional-style drive work together to enable high speed with high capacity. I don't want to use this feature, and I already have Windows 7 64 installed without using this feature. When I first installed my 2 hard drives (1 SSD and 1 traditional-style drive) in my machine and booted it up for the first time, it ran a program from the mobo that asked me if I wanted to set up XHD. Thinking it would go to some config screen, I said yes. It immediately started doing something with my drives and finished. I considered that strange, but figured it wouldn't matter when I simply install Windows onto my SSD only. I now have my BIOS and Windows running in AHCI mode with no RAID arrays and separate drives. My SSD is one of those new Corsair Force GT drives which loses power every so often, causing Windows to BSOD. I've figured everything out about this problem, including installing the latest firmware from Corsair, and the only way to fix it at this point is by installing Intel Rapid Storage Technology to control AHCI instead of Windows, since the Windows AHCI driver disables the drive's power every once in a while and can't be configured not to do so. I've tried installing Intel Rapid Storage Technology. When I reboot my machine after doing so, it BSODs just after the Windows logo. I've figured out this is because my SSD and my traditional drive are flagged as RAID, as seen in the "Intel Matrix Storage Manager" program found by switching the BIOS hard drive handling to "RAID" mode. This is due to the XHD auto-config program I mentioned earlier. Normally, the BIOS is set to AHCI, and when the drives boot in AHCI mode, they work perfectly. So, I've concluded the data is stored in AHCI mode but the drives' flags are set to RAID. I've figured out that I can accomplish my objective by using the "Intel Matrix Storage Manager" program on the mobo (with "Reset disks to non-RAID"), but doing so would cause it to completely wipe the drives I select. I want to simply toggle these flags from RAID to AHCI so Intel Rapid Storage Technology doesn't fail and cause a BSOD upon booting, but without wiping the drives.

  Read the article

• Intel 82865G Graphics Controller - making it work in Windows 7

  - by abrams

  RE: Putting this out there in case someone else runs into this issue. The intel chipset is on-board. I discovered the reason for the crappy resolution in windows 7 was that the memory to share with the video card was set to 1MB in the BIOS. I changed this to 8MB (the maximum) and then the PC rebooted I was able to select a higher resolution. link|flag answered Aug 18 '09 at 5:53 Nick Kavadias Nick, Does this give Aero functionalty ?

  Read the article

• Intel Centrino Advanced-N + WiMAX 6250 Drivers for Windows 8 (64 Bit) on Dell N7010

  - by kindrudekid

  I cannot seem to find or get the required drivers for Intel Centrino Advanced-N + WiMAX 6250 on windows 8 64bit on my Dell N7010 Laptop I have wifi connectivity but all i get is max G speeds and no N speeds, transfering files on mapped drives is really slow as a result, this wasnt the case before, i dont care about wimax, but even those drivers would be appreciated incase i decide to sell in future...

  Read the article

• AMD switchable graphics are not working OR I don't know how to make them work

  - by Deus Deceit

  I don't know if this is the right place for this question, but I'll give it a shot. I have a Dell Inspiron 17R 5721. It's supposed to be using switchable graphics. It has an Intel HD 4000 and a Radeon HD 8730M and I'm using windows 8. My problem is this, I Installed the drivers that dell gives me but I don't see the AMD graphics card ANYWHERE ( I do see it in device manager but not anywhere else to select and play a game using AMD). I installed the latest drivers from AMD and same thing, I can't run a game with AMD graphics card. I change the applications preferences in the Catalyst control center but even after that, games don't give me the option to select the AMD card, they list only the Intel HD 4000. Can someone tell me what I have to do to make this work? ------------------- After looking around and messing with stuff. I think.... I THINK that you don't really get the option to select a graphics card. Switchable graphics is all about switching automatically depending on application's needs. Cause when I uninstalled AMD's drivers or actually (screwed up lol) games were playing much worse. When I re-installed them, games went back to being good looking. So even if a game sees only the Intel HD 4000 graphics card windows or AMD's drivers will switch to the AMD Readeon graphics card automatically. I hope someone can verify this. Cause seriously I don't think you get to play scyrim with High graphics settings or even ultra with the Intel HD Graphics card. -------------------

  Read the article

• WiFi connected to router, but no internet connection

  - by Quetzacotl

  I just got a new notebook, a ThinkPad Edge E530, and installed Ubuntu on it. I'm pretty new to Ubuntu. On the same laptop, running Windows 7, the Wi-Fi connection works fine. Ethernet connection works both on Win7 and on Ubuntu. Only Wi-Fi on Ubuntu does not work; it connects to the Wi-Fi access point but I don't have Internet access. My wireless card is Intel Centrino Wireless-N 2230. What can fix the problem? EDIT: ifconfig -a eth0 Link encap:Ethernet HWaddr b8:88:e3:30:72:34 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:163 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10124 (10.1 KB) TX bytes:10124 (10.1 KB) usb0 Link encap:Ethernet HWaddr 02:15:e0:ec:01:00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 68:5d:43:43:71:e1 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe43:71e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2801 (2.8 KB) TX bytes:26230 (26.2 KB) route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"SATELITE" Mode:Managed Frequency:2.462 GHz Access Point: 00:1F:1F:8D:CC:08 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=60/70 Signal level=-50 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:93 Invalid misc:243 Missed beacon:0 eth0 no wireless extensions.

  Read the article

• Built-in network card not working?

  - by Zeeshan

  Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

  Read the article

• DVD not detected?

  - by Benjamin

  As i insert a DVD in my drive (on a laptop) using Kubuntu 12.04, the DVD is not detected. The drive takes the DVD, I can hear it munching on it for a while, and then nothing. Even ejecting the DVD becomes a hassle, I need to do that at boot time otherwise the OS won't allow me to eject. Kubuntu 12.04 used to read and mount the same DVDs just fine a week ago. Edit: since I am able to boot from CD, can I safely assume the issue is not a hardware issue? How can I fix this? wodim --devices returns: wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'Optiarc' 'DVD+-RW AD-7640A' ------------------------------------------------------------------------- sudo lshw -class disk returns: *-cdrom description: DVD-RAM writer product: DVD+-RW AD-7640A vendor: Optiarc physical id: 0.0.0 bus info: scsi@3:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/sr0 version: JD06 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=open lspci returns: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) and lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader The /etc/modprobe.d/blacklist.conf contains: # This file lists those modules which we don't want to be loaded by # alias expansion, usually so some other driver will be loaded for the # device instead. # evbug is a debug tool that should be loaded explicitly blacklist evbug # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd # replaced by e100 blacklist eepro100 # replaced by tulip blacklist de4x5 # causes no end of confusion by creating unexpected network interfaces blacklist eth1394 # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much # hardware on its own (Ubuntu bug #2011, #6810) blacklist snd_intel8x0m # Conflicts with dvb driver (which is better for handling this device) blacklist snd_aw2 # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306) blacklist i2c_i801 # replaced by p54pci blacklist prism54 # replaced by b43 and ssb. blacklist bcm43xx # most apps now use garmin usb driver directly (Ubuntu: #114565) blacklist garmin_gps # replaced by asus-laptop (Ubuntu: #184721) blacklist asus_acpi # low-quality, just noise when being used for sound playback, causes # hangs at desktop session start (Ubuntu: #246969) blacklist snd_pcsp # ugly and loud noise, getting on everyone's nerves; this should be done by a # nice pulseaudio bing (Ubuntu: #77010) blacklist pcspkr # EDAC driver for amd76x clashes with the agp driver preventing the aperture # from being initialised (Ubuntu: #297750). Blacklist so that the driver # continues to build and is installable for the few cases where its # really needed. blacklist amd76x_edac

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >